[Stock Backup & OTA Zip] Int - T6UL | Sense 5.5[2.61.707.1] & Sense 6[3.14.707.3]
Stock Backup TWRP - International | Unrooted | Sense5.5 | 2.61.707.1
[2014-06-17--17-34-28 KOT49H release-keys] - [2.61.707.1] [Stock ROM Unrooted]
Info : 13 Splits 100MB RAR File
Size : 1.23GB
Download : https://www.mediafire.com/folder/zc5097wdc65ij/
Stock Recovery : http://www.mediafire.com/download/envapmqe1ev31iu/
☛ Move the extracted backup folder into folder "TWRP\BACKUPS\FA3BXXXXXXXX\" and restore via TWRP ☚
☛ Preload apps already added in the backup ☚
☛ If you're going to take OTA, Flash stock recovery, lock bootloader and you're ready to get OTA ☚
Stock Backup TWRP - International | Unrooted | Sense6 | 3.14.707.3
[2014-06-17--18-30-09 KOT49H release-keys] - [3.14.707.3] [Stock ROM Unrooted]
Info : 12 Splits 100MB RAR File
Size : 1.09GB
Download : https://www.mediafire.com/folder/8u5okmczf5206/
Stock Recovery : http://www.mediafire.com/download/n8apfhsujg84dje/
☛ Move the extracted backup folder into folder "TWRP\BACKUPS\FA3BXXXXXXXX\" and restore via TWRP ☚
International T6UL - hboot 3.14.707.3 no red text modified
Download & Instruction : Here
Alt. download : http://www.mediafire.com/download/7ab1sn3r2wdvqx8/
Credit & thanks to : @abusalza
☢☢☢☢☢☢☢☢☢☢☢☢☢☢☢☢☢☢☢☢☢☢☢☢☢☢☢☢☢☢☢☢☢☢☢☢☢☢☢☢☢☢☢☢☢☢☢☢☢☢☢☢
OTA Zip Only - T6UL - International | Sense6 | 3.14.707.3
version-bootloader: 2.49.0000
version-baseband: 4T.27.3218.14
version-main: 3.14.707.3
product: t6ul
modelid: 0P3P52000
cidnum: HTC__044
hbootpreupdate:12
[3.14.707.3] OTA_T6_UL_K44_SENSE60_MR_hTC_Asia_WWE_3.14.707.3-2.61.707.1_release_379462.zip
Size : 561.65MB
MD5 : BC7576A355508D2978E9E7885AF5425E
Download : http://www.mediafire.com/download/y86ri4h7zu9gypo
Firmware.zip only ~Removed~ due to complaints and fail to match device requirements can cause device hard bricks when flashed.
Please download full package official OTA update by htc from above link.
How to install OTA update package on stock ROM t6ul 2.61.707.1 :
1. Download OTA update file package
2. You can rename it to a simple name e.g: 'update.zip'
3. Copy to root of SD card
4. Boot device into Bootloader
5. Enter Recovery
6. Select Update from zip
7. Select 'install update.zip from SD card'
☢☣ Install at your own risk ☣☢
If im s-off and unlock, can i flash this firmware?
Winins said:
If im s-off and unlock, can i flash this firmware?
Click to expand...
Click to collapse
If your device version is matched in the OP, the answer is YES. Flash firmware.zip in RUU.
I have supercid, this firmware only update hboot and radio, no?
Winins said:
I have supercid, this firmware only update hboot and radio, no?
Click to expand...
Click to collapse
This firmware.zip will update/replace recovery, hboot, boot.img, and radio.img
After flash firmware.zip in RUU,
1. You need to reboot.
2. Reflash custom recovery.
3. Dirty flash your current custom rom
4. Profit!
Your supercid will be replace with stock hboot CID. Redo step to get supercid after flash
Intl hboot 3.14.707.3 no red text modified
You must be S-Off to do this! This one's for International variant only
I can not be held responsible for this zip please flash at your own risk!!
Place the zip in your adb/ fastboot directory on your computer
Put the device in fastboot mode and connect to the computer
Enter the following commands from cmd from the adb/ fastboot directory:
fastboot oem rebootRUU
fastboot flash zip 3.14.707.3_NoRedText_hboot.zip
Note: The progress on the screen may not fully 100% but it's normal. but make sure it's writen "successfully" on the cmd windows on your PC
fastboot reboot-bootloader
@abusalza , Thanks buddy! appreciated your work.
edit : it works perfect!
mafyas said:
@abusalza , Thanks buddy! appreciated your work.
Click to expand...
Click to collapse
you're very welcome buddy...
i flashed firmware zip and my phone dont reboot, what am i doing?
do i bricked my one max?
How did you flash it? What does it tells at the end of the process? Your phone didnt boot mean? Cant get into bootloader or cant get into homescreen?
Give some details sir so i could help.
Blackscreen!! i cant power on my phone. No bootloader, no fastboot, no recovery, no normal boot... i think i brikced it, i used this:
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot reboot-bootloader
when i connect my phone with my pc, pc show qhsusb_dload in usb.
Winins said:
Blackscreen!! i cant power on my phone. No bootloader, no fastboot, no recovery, no normal boot... i think i brikced it, i used this:
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot reboot-bootloader
when i connect my phone with my pc, pc show qhsusb_dload in usb.
Click to expand...
Click to collapse
That's weird, should not be any problem if your device is matched version in the OP because I have no problem flashing firmware. Hardly say that your device bricked. I don't know how to help in this case, try search forum if any helpful thread regarding recover bricked.
can anyone help me with qhsusb_dload?
Winins said:
can anyone help me with qhsusb_dload?
Click to expand...
Click to collapse
what happens if you hold volume up and power for sixty seconds with the phone not connected to the PC?
Sent from my SM-T320 using Tapatalk
nothing, blackscreen all time, i think my phone bricked
perhaps this could help!
Winins said:
nothing, blackscreen all time, i think my phone bricked
Click to expand...
Click to collapse
Don't intend to mess this up, but when you hold vol up + power buttons for tens of seconds did you see the capacitive buttons blink a few times?
If so, then you can wait until it stops blinking (should be about 5-8x blinking) and quickly release both vol up and power buttons, then hold vol down for a few seconds then release it. it should bring you to HBOOT mode.
This worked for me when I thought I had bricked my One max from accidental build.prop modification (changed the value and forgot to set correct permission).
If holding vol up + power does not make the capacitive buttons blink a few times, then sadly it could be a hard brick.
captative buttons arent on when i used vol up + power. Hardbrick
Updated
OP updated with latest [Stock Backup TWRP - International | Unrooted | Sense6 | 3.14.707.3]
Startet Flash of Firmware. And my Phone switched off by itself. Windows now detect qhsusb_dload and nothing more is working I have now the same Problem like Winins. I have a international Version of the One Max Modellid and all other things matched. Is not my First Phone from Htc that i flash i am sure i did nothing wrong and now i Have a brick wow. Hopfully my waranty will help me out of this Problem. Or can i do anything now. I found some people with same Problem but with other HTC devices and there exist a fix but i don´t know if these fixes will work with One Max.
Here a copy of the Flash Report:
C:\1>fastboot flash zip firmware.zip
target reported max download size of 1554698240 bytes
sending 'zip' (45929 KB)...
OKAY [ 2.783s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) shift signature_size for header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) start image[hboot] unzipping for pre-update check...
(bootloader) start image[hboot] flushing...
(bootloader) [RUU]WP,hboot,0
(bootloader) [RUU]WP,hboot,99
(bootloader) [RUU]WP,hboot,100
(bootloader) ...... Successful
(bootloader) start image[sbl1-1] unzipping for pre-update...
(bootloader) start image[sbl1-1] flushing...
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ...... Bypassed
(bootloader) start image[sbl1-2] unzipping for pre-update...
(bootloader) start image[sbl1-2] flushing...
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ...... Bypassed
(bootloader) start image[sbl1-3] unzipping for pre-update...
(bootloader) start image[sbl1-3] flushing...
(bootloader) signature checking...
(bootloader) [RUU]WP,sbl1-3,0
(bootloader) [RUU]WP,sbl1-3,100
(bootloader) ...... Successful
(bootloader) start image[sbl1-4] unzipping for pre-update...
(bootloader) start image[sbl1-4] flushing...
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ...... Bypassed
(bootloader) start image[sbl1-5] unzipping for pre-update...
(bootloader) start image[sbl1-5] flushing...
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ...... Bypassed
(bootloader) start image[rpm] unzipping for pre-update...
(bootloader) start image[rpm] flushing...
(bootloader) [RUU]WP,rpm,0
(bootloader) [RUU]WP,rpm,100
(bootloader) ...... Successful
FAILED (remote: 90 hboot pre-update! please flush image again immediately)
finished. total time: 6.820s
Oh man.. I hate to see this happen. The flash report says, "FAILED (remote: 90 hboot pre-update! please flush image again immediately)" . Did you flash it again? When it does say "Failed", you should re-flash it immediately. When it says "Okay", that's the real Okay and good to reboot. The most important, device must be S-OFF. I have done it for my friends, 4 One Max devices, no problem at all. Sigh. I'm just sharing the OTA since few people PM me for it.
OP update with sense5.5 [2.61.707.1] stock twrp backup
Related
I was going through the steps to try to flash the Google Edition ROM onto my T-Mobile HTC One using this guide: http://htc-one.wonderhowto.com/how-...with-bootloader-recovery-ota-updates-0148068/
I have unlocked the bootloader, rooted, and gotten S-off. I'm on Step 3, changing the model ID if necessary. I was stupid and was not reading carefully enough, and missed the edit at the top of the section saying I didn't actually need to change this. So I went to the guide he linked to: http://forum.xda-developers.com/showthread.php?t=2322820
In this guide, I downloaded the PL83IMG.zip and edited the text file to put in my current Model ID, Cell ID, and ROM version. Rezipped, then did the command he gives:
Code:
c:\sdk-tools>fastboot flash zip android-info.zip
target reported max download size of 1526722560 bytes
sending 'zip' (479 KB)...
OKAY [ 0.247s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) start image[hboot] unzipping & flushing...
(bootloader) [RUU]UZ,hboot,0
(bootloader) [RUU]UZ,hboot,43
(bootloader) [RUU]UZ,hboot,99
(bootloader) [RUU]UZ,hboot,100
(bootloader) [RUU]WP,hboot,0
(bootloader) [RUU]WP,hboot,100
(bootloader) ...... Successful
OKAY [ 2.401s]
finished. total time: 2.653s
Ok, now as he says in the guide, I saw the HTC logo and a progress bar that was sitting at about 3/4 done. He says to reboot the phone, so I did this. The screen remains blank, I don't get the gray spotted screen he describes. I tried the "fastboot oem writemid PN0712000" command, and it just sat on "< waiting for device >" for a long time, until I finally cancelled the command.
I can still get into the bootloader by holding down power and volume down, but if I try to boot normally or boot into recovery, the screen just turns off and remains off. Also, the device can no longer be recognized on my computer. I get a popup from Windows saying "the last USB device connected to this computer malfunctioned, Windows does not recognize it." And neither adb or fastboot can see that there is a device connected.
So...is my phone bricked? Is there some way I can recover from this? I assume the problem is this HBOOT that I flashed. This is what I'm seeing on my bootloader screen
Code:
*** LOCKED ***
M7_UL PVT ENG S-OFF
CID-T-MOB010
HBOOT-1.39.2000 (PN0713000)
OpenDSP-v32.120.274.0909
eMMC-boot
I do notice that it changed to LOCKED from UNLOCKED and TAMPERED.
Mine followed the same pattern. You should be able to make sure your in fastboot and write your CID and MID and then run an RUU through the fastboot OEM rebootRUU command
Sent from my Nexus 10 using Tapatalk 4
Revert to 2.47
Hi
I have hboot 2.49 want to revert back to 2.47 and plus want to convert it to International version i want to use 407 roms
Details
CID-1111111
HBOOT-2.49.0000
Radio-4T.24.3218.09
OS-2.61.708.1
or can someone provide me latest 2.49 with OS 401
Thanks
Hi
I successfully flashed rom RUU.exe BrightstarUS WWE 1.23.1540.1 (flyhalf's)
and when i got the OTA for 4.4.2 it says my mobile software been modified and cannot update
I used manually to update through fastboot oem rebootRUU
OTA_T6_UL_K44_SENSE55_MR_BrightstarUS_WWE_2.61.1540.1-1.23.1540.1_release
please help me if I did something wrong
Try Change back go stock cid
Sent from my HTC One max using xda premium
I don't really know what is my original CID
HTC___116
something like this not sure
i have seen a list somewhere maybe i will recognize it
EDIT: Actually original software was HK region changed it to WWE US brightstar
I found the CID is HTC__622
i tried to flash it with Brightstar US CID BS_US001
is not working
with original CID HTC__622
is not working
(bootloader) Read zipped android_info fail
FAILED (remote: 24 parsing android-info fail)
I dont know whats wrong,
please help
The Don Jay said:
I found the CID is HTC__622
i tried to flash it with Brightstar US CID BS_US001
is not working
with original CID HTC__622
is not working
(bootloader) Read zipped android_info fail
FAILED (remote: 24 parsing android-info fail)
I dont know whats wrong,
please help
Click to expand...
Click to collapse
Can you check what is your MID ? is it 0P3P50000?
Also can you post the exact error message or a photo?
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.46.0000
(bootloader) version-baseband: 4T.21.3218.01
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.19.708.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA3ASWG05176
(bootloader) imei: 357311050403377
(bootloader) meid: 00000000000000
(bootloader) product: t6ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: 0P3P52000
(bootloader) cidnum: HTC__622
(bootloader) battery-status: good
(bootloader) battery-voltage: 4153mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6cad6811
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.121s
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) Read zipped android_info fail
FAILED (remote: 24 parsing android-info fail)
finished. total time: 20.643s
i have succeeded to flash
0P3PIMG_T6_UL_JB43_SENSE55_hTC_Asia_HK_1.19.708.2_Radio_4T.21.3218.01_10.15.1718.01_release_337043_signed_Hboot_2_4
my boot showing 1.19.708.2 but software version is 1.23.1540.1
what is missing what is the right thing to do ?
please help
Hi
I have HTC One max HK Asia Version HTC__622 i tried to flash this rom in CMW, TWP and stock recovery but not taking
with locked and unlocked bootloader
0P3PIMG_T6_UL_JB43_SENSE55_hTC_Asia_HK_1.19.708.2_ Radio_4T.21.3218.01_10.15.1718.01_release_337043_s igned_2_4.zip
tried wiping data, system and dalvik wipe but still giving me an error file is too large
is there anything i did wrong ?
please help im stuck
looking at the picture of you phone diplaying hboot, you cid is 111111111.
try changing back to a good 1
Hi
Problem solved thanks to Chinese website
changed the CID to the original which is HTC__622
Downloaded and copied and renamed the file
0P3PIMG_T6_UL_JB43_SENSE55_hTC_Asia_HK_1.19.708.2_ Radio_4T.21.3218.01_10.15.1718.01_release_337043_s igned_2_4.zip
to
0P3PIMG.zip and located to external SD card
Locked or Relocked the Bootloader .. better locked to get the fingerprint working (this can be done with scotty's method)
got to bootloader mode and press power button to enter bootloader mode then the file will update automatically without any command
Done
source chinese website which i cant post yet
your help
The Don Jay said:
Hi
Problem solved thanks to Chinese website
changed the CID to the original which is HTC__622
Downloaded and copied and renamed the file
0P3PIMG_T6_UL_JB43_SENSE55_hTC_Asia_HK_1.19.708.2_ Radio_4T.21.3218.01_10.15.1718.01_release_337043_s igned_2_4.zip
to
0P3PIMG.zip and located to external SD card
Locked or Relocked the Bootloader .. better locked to get the fingerprint working (this can be done with scotty's method)
got to bootloader mode and press power button to enter bootloader mode then the file will update automatically without any command
Done
source chinese website which i cant post yet
Click to expand...
Click to collapse
I need to revert back my hboot 2.49 to 2.47 . I would appreciate your help on how did your do it
solved too on me
The Don Jay said:
Hi
Problem solved...
Click to expand...
Click to collapse
Thanks!
BadrSaleh said:
I need to revert back my hboot 2.49 to 2.47 . I would appreciate your help on how did your do it
Click to expand...
Click to collapse
you need soff using firewater.
then you can flash any hboot. but be careful to use the correct one!
[RUU] Google Edition Conversion. 4.4.2- 1.16.1700.16 -RUU Zip Non-Rooted & Pre-Rooted
This will NOT work on a CDMA HTC One GSM ONLY!
[PSA: People have been reporting not being able to flash back to sense. When investigating this further I found that the system partition on the GPE is about half the size of the sense system partition. (just over a gig compared to like 2.8) This was not the case on the M7
So as of now once you convert, YOU CAN NOT GO BACK TO A SENSE BASED ROM UNTIL A RUU is RELEASED! Rest assured nothing is wrong with the RUU. If you did convert and want to go back you just have to wait for a RUU to be released then you can go back but flashing a sense rom in recovery wont work.
This thread is NOT to support changing your MID, Changing your CID, Rooting or Flashing a custom recovery. If you need to learn how to do any of those do NOT use this thread to post in. Post in the respective dedicated threads to complete these processes. This thread is ONLY to support flashing the RUU. Nothing more, nothing less.
This is NOT a general 4.4.2 discussion thread.
Furthermore, if you need any more detailed instructions than what's stated in this post then you really shouldn't be doing this to your device. If you need a "video" or ask for "step by step" instructions you will NOT get anything more than what's in this post (at least from me). There is no easier way to do this process, there is no easier way to explain it. If you read the post and still don't understand what to do then I advise you to leave your phone alone... Read and then read some more until you understand everything.. WE WILL NOT SPOON FEED YOU IN THIS THREAD!
This procedure is not easy and is not really noob friendly, well flashing the RUU is not really difficult but it's the prerequisites that are more complex/risky. If the instructions aren't clear enough for you or you require further hand holding then I'm sure most of us would advise you stay away from the process.
Also, please do not PM me for support. PM's will not be answered. Post it in the thread. It helps other's having the same issue find a solution. If it's over PM it only benefits you and not everyone else
Prerequisites
S-Off,
ADB knowledge
Fastboot knowledge
Instructions:
First you are going to have to have s-off on your device. Thread for S-off (and support for S-off) http://forum.xda-developers.com/showthread.php?t=2708464
Full Conversion 4.4.2 RUU ZIP containing System, Boot and all Firmware 1.16.1700.16
This will wipe EVERYTHING INCLUDING YOUR INTERNAL SD CARD!!!! PLEASE REMOVE YOUR EXTERNAL CARD IF YOU HAVE ONE so make sure you back up the contents before running this, but you'll end up with a factory-fresh GE. Of course, there's still no support, warranty or responsibility implied or otherwise.
The 4.4.2 RUU Zip supports the following MIDs and CIDs if your MID or CID is not in this list you will have to modify the android-info.txt file in the zip to match your MID/CID
modelid: 0P6B12000
modelid: 0P6B17000
modelid: 0P6B*****
cidnum: 11111111
cidnum: T-MOB010
cidnum: CWS__001
cidnum: BS_US001
cidnum: GOOGL001
(please note.. If your model id or cid is not supported you can open up the android-info.txt file that's in the zip and replace one of the model ids or cids listed to match yours.)
Code:
adb reboot bootloader
Code:
fastboot oem rebootRUU
Code:
fastboot flash zip RUU-HTC_One_M8_GE-1.16.1700.16.zip/CODE]
you will the following message:
[CODE]FAILED (remote: 90 hboot pre-update! please flush image again immediately)
Just run the same command again:
Code:
fastboot flash zip RUU-HTC_One_M8_GE-1.16.1700.16.zip
Code:
fastboot reboot
Stock Non-Rooted 4.4.2-1.16.1700.16 RUU Zip: http://www.androidfilehost.com/?fid=23329332407584639
Mirror:
MD5: eb56e73af883aa2d175032c7dc527dc8
Stock Rooted + busy box pre-installed 4.4.2-1.16.1700.16 RUU Zip: http://www.androidfilehost.com/?fid=23329332407584640
Mirror:
MD5: b380f51a4a2b0e2a83c4d7bd92075ce5
If you want to flash a custom recovery you will have to flash back to stock recovery to get the OTA's
You can get the GPE Stock recovery here
Special thanks to @pasker17 for allowing me to walk him through pulling all the partitions!!
@beaups and crew for S-off
Disclaimer: I am not responsible if you use this and brick your device or if your device blows up, implodes, or flames start shooting from it or it kills your neighbor's dog. Flash at your own risk. This process is not for the faint of heart so I am not responsible.... It was the other guy... I swear....
reserved
this one too
Worked like a charm the first time thanks! One thing to note is my dot view case works fine with calls the voice gesture down is missing though I'm not missing it. I mention this as some reviews say the gpe edition can't answer calls with the case.
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Pre-rooted + busybox RUU added to op
ill probably hold off on fully converting for now but what is the advantage of doing so VS just flashing a GPE rom?
fix-this! said:
ill probably hold off on fully converting for now but what is the advantage of doing so VS just flashing a GPE rom?
Click to expand...
Click to collapse
OTA updates.
Sent from my HTC One_M8 using Tapatalk
BONED
had to change name
Thank you. Confirmed works on Rogers M8. Thank you again. Would be nice if HTC can release the photo edit app on play store in the future.... and maybe the burst mode for the camera
Questions
First off I wanted to say thanks!
But I'm having a few issues getting the IR blaster to work. The app detects it but when I put a camera up to the button I'm not seeing any flashing.
Also how to we use the HTC photo edit?
Thanks again!
lordpelvis said:
First off I wanted to say thanks!
But I'm having a few issues getting the IR blaster to work. The app detects it but when I put a camera up to the button I'm not seeing any flashing.
Also how to we use the HTC photo edit?
Thanks again!
Click to expand...
Click to collapse
What IR app are you using? I'm using Smart Remote and it is working perfectly. As for the camera, sorry, but we lost pretty much all functionality with the GPe camera.
I've tried power IR and a few others. Have a link to the remote you're using?
Sent from my HTC One_M8 using xda app-developers app
---------- Post added at 11:01 AM ---------- Previous post was at 10:54 AM ----------
I actually bought the app and nothing happens.
Sent from my HTC One_M8 using xda app-developers app
You can download the HTC TV app from the playstore.. Again.. To remind you guys.. That type of discussion is off topic and does not belong in the thread.
Sent from my HTC One_M8 using Tapatalk
I did want to mention that when trying to flash the RUU, I did get a second "error" after the listed first one. I've attached the code from ADB below.
Code:
Daniels-iMac:~ Daniel$ fastboot flash zip /Users/Daniel/Downloads/RUU-HTC_One_M8_GE-1.16.1700.16.zip
target reported max download size of 1830715392 bytes
sending 'zip' (510598 KB)...
OKAY [ 20.133s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) total_image_number=9
(bootloader) start image[tz] unzipping & flushing...
(bootloader) [RUU]UZ,tz,0
(bootloader) [RUU]UZ,tz,76
(bootloader) [RUU]UZ,tz,100
(bootloader) [RUU]WP,tz,0
(bootloader) [RUU]WP,tz,100
(bootloader) ...... Successful
(bootloader) current_image_number=0
(bootloader) start image[adsp] unzipping & flushing...
(bootloader) [RUU]UZ,adsp,0
(bootloader) [RUU]UZ,adsp,6
(bootloader) [RUU]UZ,adsp,13
(bootloader) [RUU]UZ,adsp,21
(bootloader) [RUU]UZ,adsp,27
(bootloader) [RUU]UZ,adsp,34
(bootloader) [RUU]UZ,adsp,41
(bootloader) [RUU]UZ,adsp,48
(bootloader) [RUU]UZ,adsp,54
(bootloader) [RUU]UZ,adsp,61
(bootloader) [RUU]UZ,adsp,68
(bootloader) [RUU]UZ,adsp,74
(bootloader) [RUU]UZ,adsp,81
(bootloader) [RUU]UZ,adsp,88
(bootloader) [RUU]UZ,adsp,94
(bootloader) [RUU]UZ,adsp,99
(bootloader) [RUU]UZ,adsp,100
(bootloader) [RUU]WP,adsp,0
(bootloader) [RUU]WP,adsp,26
(bootloader) [RUU]WP,adsp,53
(bootloader) [RUU]WP,adsp,79
(bootloader) [RUU]WP,adsp,100
(bootloader) ...... Successful
(bootloader) current_image_number=1
(bootloader) start image[boot] unzipping & flushing...
(bootloader) [RUU]UZ,boot,0
(bootloader) [RUU]UZ,boot,6
(bootloader) [RUU]UZ,boot,12
(bootloader) [RUU]UZ,boot,18
(bootloader) [RUU]UZ,boot,25
(bootloader) [RUU]UZ,boot,33
(bootloader) [RUU]UZ,boot,43
(bootloader) [RUU]UZ,boot,55
(bootloader) [RUU]UZ,boot,62
(bootloader) [RUU]UZ,boot,68
(bootloader) [RUU]UZ,boot,74
(bootloader) [RUU]UZ,boot,80
(bootloader) [RUU]UZ,boot,87
(bootloader) [RUU]UZ,boot,93
(bootloader) [RUU]UZ,boot,99
(bootloader) [RUU]UZ,boot,100
(bootloader) [RUU]WP,boot,0
(bootloader) [RUU]WP,boot,100
(bootloader) ...... Successful
(bootloader) current_image_number=2
(bootloader) start image[recovery] unzipping & flushing...
(bootloader) [RUU]UZ,recovery,0
(bootloader) [RUU]UZ,recovery,8
(bootloader) [RUU]UZ,recovery,16
(bootloader) [RUU]UZ,recovery,22
(bootloader) [RUU]UZ,recovery,29
(bootloader) [RUU]UZ,recovery,37
(bootloader) [RUU]UZ,recovery,45
(bootloader) [RUU]UZ,recovery,51
(bootloader) [RUU]UZ,recovery,60
(bootloader) [RUU]UZ,recovery,68
(bootloader) [RUU]UZ,recovery,76
(bootloader) [RUU]UZ,recovery,85
(bootloader) [RUU]UZ,recovery,93
(bootloader) [RUU]UZ,recovery,100
(bootloader) [RUU]WP,recovery,0
(bootloader) [RUU]WP,recovery,66
(bootloader) [RUU]WP,recovery,100
(bootloader) ...... Successful
(bootloader) current_image_number=3
(bootloader) start image[rpm] unzipping & flushing...
(bootloader) [RUU]UZ,rpm,0
(bootloader) [RUU]UZ,rpm,100
(bootloader) [RUU]WP,rpm,0
(bootloader) [RUU]WP,rpm,100
(bootloader) ...... Successful
(bootloader) current_image_number=4
(bootloader) start image[sp1] unzipping & flushing...
(bootloader) [RUU]UZ,sp1,0
(bootloader) [RUU]UZ,sp1,20
(bootloader) [RUU]UZ,sp1,41
(bootloader) [RUU]UZ,sp1,77
(bootloader) [RUU]UZ,sp1,97
(bootloader) [RUU]UZ,sp1,100
(bootloader) [RUU]WP,sp1,0
(bootloader) [RUU]WP,sp1,100
(bootloader) ...... Successful
(bootloader) current_image_number=5
(bootloader) start image[system] unzipping & flushing...
(bootloader) [RUU]UZ,system,0
ERROR: usb_read failed with status e00002ed
FAILED (status read failed (No such file or directory))
finished. total time: 40.913s
For those who may think something is wrong, it may not be the case. Although I received the error above, my phone continued to go through the process of flashing the RUU. I was patient and let it finish. The last step running the "fastboot reboot" command will not work as I was at a black screen that looked like fastboot except I had none of the usual fastboot options (hboot, etc.), just the listing of the hardware info (model, CID, etc.). I held the power button for several seconds until the phone shut off completely. Turned it back on and it booted up fine. Ran through the setup process and everything seems to be working fine. I will update if my phone explodes or anything else I notice is wrong, but otherwise it's been great so far. Thanks graffixnyc!
Thanks for this. I did this and want to know what app do you recommend for visual voicemail? The original app was great. Anyway I can download the one that came with the phone? Thanks
xoulu said:
Thanks for this. I did this and want to know what app do you recommend for visual voicemail? The original app was great. Anyway I can download the one that came with the phone? Thanks
Click to expand...
Click to collapse
Use Google voice for vvm. It will even text you a transcription of the phone message.
Sent from my HTC One_M8 using Tapatalk
Hey guys, I'm going to close this thread and ask you guys that you use the main thread in the m8 section (the RUU is the same) It's just easier for me to maintain one thread instead of 3 so head on over to the main thread: http://forum.xda-developers.com/showthread.php?t=2708589
I have AT& T HTC One M7 (unlocked is displayed in HBOOT). It had crashed once before but I was able to get it back up and running using this thread: http://forum.xda-developers.com/htc-one/help/bricked-htc-one-m7-attempting-to-t2856447
But now it has crashed/bricked again and even after following the same steps, I am unable to get it up and running. Two new things I see is even if I select install recovery during installation, it goes back to twrp and looks like twrp is never able to install root access on this device. Specifics of my device are below:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4M.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.12.502.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4130mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Any thoughts what could be wrong. I even tried wiping out cache, delvik cache, data, system from twrp but no luck. Also, I have copy of HTCOne-32GB-ATT-5.12.502.2-TWRP-stock-unrooted.zip but not sure how I can restore this and if it will help.
cagashe said:
I have AT& T HTC One M7 (unlocked is displayed in HBOOT). It had crashed once before but I was able to get it back up and running using this thread: http://forum.xda-developers.com/htc-one/help/bricked-htc-one-m7-attempting-to-t2856447
But now it has crashed/bricked again and even after following the same steps, I am unable to get it up and running. Two new things I see is even if I select install recovery during installation, it goes back to twrp and looks like twrp is never able to install root access on this device. Specifics of my device are below:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4M.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.12.502.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4130mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Any thoughts what could be wrong. I even tried wiping out cache, delvik cache, data, system from twrp but no luck. Also, I have copy of HTCOne-32GB-ATT-5.12.502.2-TWRP-stock-unrooted.zip but not sure how I can restore this and if it will help.
Click to expand...
Click to collapse
Download the stock 5.12.502.2 recovery and place in your adb/fastboot folder.
Boot into bootloader/FASTBOOT USB:
Code:
fastboot flash recovery 5.12.502.2.recovery.img
fastboot erase cache
fastboot reboot-bootloader
Boot into Recovery and perform a factory reset
Reboot back to bootloader
Flash TWRP 2.6.3.3
I would stick with the Guru Reset it can be done in TWRP. If the stock Recovery does not do the trick, then you could try the stock firmware. You will have to relock your bootloader before you can flash it.
Well.. I am clueless now
majmoz said:
Download the stock 5.12.502.2 recovery and place in your adb/fastboot folder.
Boot into bootloader/FASTBOOT USB:
Code:
fastboot flash recovery 5.12.502.2.recovery.img
fastboot erase cache
fastboot reboot-bootloader
Boot into Recovery and perform a factory reset
Reboot back to bootloader
Flash TWRP 2.6.3.3
I would stick with the Guru Reset it can be done in TWRP. If the stock Recovery does not do the trick, then you could try the stock firmware. You will have to relock your bootloader before you can flash it.
Click to expand...
Click to collapse
Well.. I am clueless now... I tried all the above steps you provided and and used Guru Reset along with firmware. Also, I tried ViperOne 6.2 with no luck.
To be precise the issue now I am running into is no matter what I tried all installations show up as successful but then on reboot phone gets in bootloop (it comes up fine until HTC beatsaudio screen and reboots again). Any thoughts/ideas?
cagashe said:
Well.. I am clueless now... I tried all the above steps you provided and and used Guru Reset along with firmware. Also, I tried ViperOne 6.2 with no luck.
To be precise the issue now I am running into is no matter what I tried all installations show up as successful but then on reboot phone gets in bootloop (it comes up fine until HTC beatsaudio screen and reboots again). Any thoughts/ideas?
Click to expand...
Click to collapse
After you ran the stock firmware or Guru Reset did you try to boot into system? If you didn't then you need to see if that fixed your issue. It might be ViperOne causing the issue with a bad boot.img. You can check the firmware to see if it has a boot.img in the zip. Just open the zip and look to see if there is a boot.img.
majmoz said:
After you ran the stock firmware or Guru Reset did you try to boot into system? If you didn't then you need to see if that fixed your issue. It might be ViperOne causing the issue with a bad boot.img. You can check the firmware to see if it has a boot.img in the zip. Just open the zip and look to see if there is a boot.img.
Click to expand...
Click to collapse
Yes.. I do see the boot. img in the Guru Reset; however, for some reason I am unable to open the firmware zip. I guess I am going to try flashing guru reset without firmware. Another question I had was about "You will have to relock your bootloader before you can flash it." I am trying to flash it leaving bootloader unlocked. Could that be the problem. If yes, can you please please give me the exact sequence I need to follow before flash and after copying Guru Reset to device. (I am using adb push for the same).
cagashe said:
Yes.. I do see the boot. img in the Guru Reset; however, for some reason I am unable to open the firmware zip. I guess I am going to try flashing guru reset without firmware. Another question I had was about "You will have to relock your bootloader before you can flash it." I am trying to flash it leaving bootloader unlocked. Could that be the problem. If yes, can you please please give me the exact sequence I need to follow before flash and after copying Guru Reset to device. (I am using adb push for the same).
Click to expand...
Click to collapse
If you are flashing the firmware, then you have to lock your bootloader since you are S-ON. Here is how you would flash the firmware.
Code:
[B][I]adb reboot bootloader[/I][/B]
After that, type:
Code:
fastboot oem lock
Then, type:
Code:
[B][I]fastboot oem rebootRUU [/I][/B]
NOTE: You should see a silver HTC logo come up on your phone after executing this command.
NOTE: if this command freezes, just disconnect the USB cable and hold the power and volume down buttons until the device reboots. Then, repeat the steps above again.
Finally:
Code:
[B][I]fastboot flash zip firmware.zip[/I][/B]
Repeat the same command: IMPORTANT
Code:
[B][I]fastboot flash zip firmware.zip[/I][/B]
NOTE: The green bar on the phone may not go to 100% of the bar ... but If you see completed on your computer command window, wait for a few seconds and move on.
Last Step:
Code:
[B][I]fastboot reboot[/I][/B]
Click to expand...
Click to collapse
You will have to unlock your bootloader before you push Guru Reset to your phone. If you have your old Unlock_code.bin you might try it first, if it fails use the whole procedure:
Originally posted by @alrayHTC ONE M7_U/M7_UL - ADB PUSH & FLASH A ROM - DETAILED INSTRUCTIONS
Prerequisites:
You need ADB and FASTBOOT on your computer,
either by installing the Android SDK or Minimal ADB and FASTBOOT
You need to know how to start a fastboot/adb command prompt:
To open a command window prompt, in Windows go to Start Menu --> ''Run'' then type cmd. Change the directory to the ADB folder on your machine:
If using the default install location for the SDK:
Code:
cd C:\adt-bundle-windows-x86_64-<DATE>\sdk\platform-tools
If using the default install location of Minimal ADB and FASTBOOT:
Code:
cd C:\Program Files (x86)\Minimal ADB and Fastboot
Or hold left shift + right click a blank space inside the folder where adb and fastboot are located and select ''Open command window here'' from the contextual menu.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You need TWRP recovery on your device.
We still recommend to use version 2.6.3.3 for all roms
except if another version is specified in the rom OP.
Use 2.7.1.1+ for roms that require "block:by-name" support (CM11)
Unlock bootloader if not already unlocked:
Thanks to Electroz for the video tutorial
Flash TWRP Recovery:
Make sure the recovery.img file is in the same folder where adb and fastboot are located
(C:\adt-bundle-windows-x86_64-<DATE>\sdk\platform-tools or C:\Program Files (x86)\Minimal ADB and Fastboot)
reboot phone in bootloader mode
Flash the recovery:
Code:
fastboot flash recovery name_of_recovery.img
fastboot erase cache
fastboot reboot-bootloader
You need your HTC drivers correctly installed on your PC:
If not, follow this guide (thanks to nkk71):
originally from @nkk71: [GUIDE] [02-MAR-2014] nkk71's SuperGUIDE to returning 100% back to stock
follow the below instructions to fix
Open "Device Manager" -> select the unknown "One" -> right-click -> "Update Driver Software ..." -> "Browse my computer" -> "Let me pick" -> "Android USB Devices" -> select "My HTC ..." -> install that
just in case, HTC Drivers can be found here: [Drivers] HTC Drivers for Windows - Several Versions (credits to @mdmower)
though you should already have them since you have been using your phone anyways
for those who like a visual guide:
okay so I did a fastboot boot command, and as you can see it didnt install correct driver
Open "Device Manager"
there's the culprit
right click and Update Driver Software
select Browse my computer for driver software
select Let me pick from a list of device drivers on my computer
select Android USB Devices
select My HTC ... (if you have more than one version, choose the latest)
warning, select Yes
successful installation
now it looks better
and can confirm:
Code:
C:\ADB3>[B]adb devices[/B]
List of devices attached
HTxxxxxxxxxx recovery
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Procedure:
Make sure the ROM you want to flash is in the same folder where ADB and FASTBOOT are.
(C:\adt-bundle-windows-x86_64-<DATE>\sdk\platform-tools or C:\Program Files (x86)\Minimal ADB and Fastboot)
Here is a list of the HTC M7 roms. Some other roms can be found here.
Connect your phone to computer using usb cable
(if not using the official HTC USB calble, make sure
you are using a USB data cable and not only a charging
cable. Data cables have 4 contacts: 5V, GND, DATA+, DATA-.
Charging cable only have 5V and GND contact and will not work)
Reboot phone in recovery mode (TWRP):
If phone is booted in OS:
Code:
adb reboot recovery
if not booted or bootlooping, hold power button + volume down until phone boot in bootloader mode
then select BOOTLOADER then RECOVERY using volume up/down to navigate and power button to select.
Make sure your phone is booted in TWRP main menu:
transfer the rom to your /sdcard folder:
Code:
adb push name_of_rom.zip /sdcard/
Wait for the zip file to transfer, this can take several minutes (5-15) and there is no progress bar, the command prompt will be unresponsive for that duration. When the command prompt is responsive again and display how much bytes transferred in X seconds, the transfer is completed:
In TWRP main menu, select ''INSTALL''
Browse the installation menu and select your rom zip file inside /sdcard folder:
Swipe to confirm you want to flash the rom
Reboot phone
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Still no luck
majmoz said:
If you are flashing the firmware, then you have to lock your bootloader since you are S-ON. Here is how you would flash the firmware.
You will have to unlock your bootloader before you push Guru Reset to your phone. If you have your old Unlock_code.bin you might try it first, if it fails use the whole procedure:
Click to expand...
Click to collapse
I tried all the steps and see a little progress.. now my phone keeps rebooting on HTC beatsaudio screen. The sequence I followed was as below:
1. Unlocked the device with unlock bin from HTCdev and rebooted in bootloader (Shows as unlocked and tampered).
2. Pushed TWRP and Guru_Reset_M7_5.12.502.2_clsA
3. Installed Guru_Reset_M7_5.12.502.2_clsA using install from TWRP.
4. Checked if the phone is up and running on reboot --> No luck (rebooting on HTC beatsaudio screen)
5. Rebooted phone again in bootloader.
6. Locked the device (fastboot oem lock) . At this step got an error on last line "too many links"
7. fastboot oem rebootRUU (got the silver screen)
8. fastboot flash zip firmware.zip (twice) waited for about a minute after getting confirmation in command prompt.
9. fastboot reboot
I believe I am not doing anything wrong. It is really frustrating now since everyone is sending me birthday wishes today on phone and I am unable to see any :crying:
cagashe said:
I tried all the steps and see a little progress.. now my phone keeps rebooting on HTC beatsaudio screen. The sequence I followed was as below:
1. Unlocked the device with unlock bin from HTCdev and rebooted in bootloader (Shows as unlocked and tampered).
2. Pushed TWRP and Guru_Reset_M7_5.12.502.2_clsA
3. Installed Guru_Reset_M7_5.12.502.2_clsA using install from TWRP.
4. Checked if the phone is up and running on reboot --> No luck (rebooting on HTC beatsaudio screen)
5. Rebooted phone again in bootloader.
6. Locked the device (fastboot oem lock) . At this step got an error on last line "too many links"
7. fastboot oem rebootRUU (got the silver screen)
8. fastboot flash zip firmware.zip (twice) waited for about a minute after getting confirmation in command prompt.
9. fastboot reboot
I believe I am not doing anything wrong. It is really frustrating now since everyone is sending me birthday wishes today on phone and I am unable to see any :crying:
Click to expand...
Click to collapse
Since the last thing you flashed was the stock firmware, boot into Stock Recovery and do a factory reset then reboot back to bootloader. Install TWRP and if the Guru Reset is still on your phone then flash it. If not, then push it to your phone like before. Hopefully, the factory reset in Recovery will clean out any outstanding issues.
Moved on to M8.. but still like to fix m7
Unfortunately none of the above steps worked hence I decided to move on with M8. However now that I have a working phone (M8) I am open to experiment with my M7.
Yesterday I tried restoring M7 nandroid backup from HTC guru and had some luck. But I guess I downloaded an older version of nandroid backup. So two questions:
1. Can anyone point me to correct version of nandroid backup that I can restore. (Phone is unlocked, S-On and not rooted. If I need to root it then I will need some guidance).
2. Any other method you guys can suggest to get the phone up and running again.
Below are getvar details.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4M.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.12.502.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4130mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
cagashe said:
Unfortunately none of the above steps worked hence I decided to move on with M8. However now that I have a working phone (M8) I am open to experiment with my M7.
Yesterday I tried restoring M7 nandroid backup from HTC guru and had some luck. But I guess I downloaded an older version of nandroid backup. So two questions:
1. Can anyone point me to correct version of nandroid backup that I can restore. (Phone is unlocked, S-On and not rooted. If I need to root it then I will need some guidance).
2. Any other method you guys can suggest to get the phone up and running again.
Below are getvar details.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4M.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.12.502.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4130mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
The nandroid backup is in the same post as the Guru Reset
http://forum.xda-developers.com/showthread.php?t=2775650
clsA said:
The nandroid backup is in the same post as the Guru Reset
http://forum.xda-developers.com/showthread.php?t=2775650
Click to expand...
Click to collapse
Thanks @clsA.. I have downloaded and copied the nandroid to device as mentioned in the post. Just one more question before I restore.. do I need to modify anything in the recovery. txt or I can simply restore it as-is
cagashe said:
Thanks @clsA.. I have downloaded and copied the nandroid to device as mentioned in the post. Just one more question before I restore.. do I need to modify anything in the recovery. txt or I can simply restore it as-is
Click to expand...
Click to collapse
it's fine as is
sometime a factory reset is needed after the restore is complete
clsA said:
it's fine as is
sometime a factory reset is needed after the restore is complete
Click to expand...
Click to collapse
@clsA.. I was able to restore the backup and saw the home screen. However after that it went to bootloop. I tried factory reset as you mentioned but no luck. Any thoughts? I am thinking of updating firmware?
cagashe said:
@clsA.. I was able to restore the backup and saw the home screen. However after that it went to bootloop. I tried factory reset as you mentioned but no luck. Any thoughts? I am thinking of updating firmware?
Click to expand...
Click to collapse
firmware is not going to help you have already done that
go into TWRP and wipe / format data ..type yes
push this rom to your phone and try it
http://www.androidrevolution.org/downloader/download.php?file=Android_Revolution_HD-One_81.0.zip
clsA said:
firmware is not going to help you have already done that
go into TWRP and wipe / format data ..type yes
push this rom to your phone and try it
http://www.androidrevolution.org/downloader/download.php?file=Android_Revolution_HD-One_81.0.zip
Click to expand...
Click to collapse
@clsA.. tried installing new rom you mentioned but no luck and it's back to bootloop from HTC screen. I am now thinking to restore your nandroid backup and look into build.prop. In one of the readings I came across this command which I believe is for getting usb debugging enabled.
write /sys/class/android_usb/android0/enable 1
start adbd
I am thinking to boot in twrp and run above command in adb shell. If successful then I think I can try rumrunner or firewater to s-off the phone... Totally frustrated now.. I have no idea why nothing is working on this phone.
USB Debugging ON now
clsA said:
firmware is not going to help you have already done that
go into TWRP and wipe / format data ..type yes
push this rom to your phone and try it
http://www.androidrevolution.org/downloader/download.php?file=Android_Revolution_HD-One_81.0.zip
Click to expand...
Click to collapse
@clsA... after some more research I found a way to enable USB debugging so steps I followed were:
1. Restored nandroid backup you mentioned in above post.
2. Modified build.prop and default.prop from PC and pushed them back in /system and / respectively.
3. I can now see usb debugging enabled in the home screen.
Only issue I am facing now is even after factory reset phone goes in bootloop from home screen (home screen always remains locked). Any thoughts?
If I somehow get S-Off by rumrunner or firewater would I have more options?
Hi
My fone htc one m8 es rooted and i want to go back my stock plz halp
I try rru img fil but error 130 bootloader also lock and (s-on )
Error 130 means you aren't using the right RUU. You have to use one that is specific to your carrier or region and must be the same version or newer. You can not downgrade while S-On.
htc on m8
I am use version4.28.502.1 dame error come
How i unroot my htc one m8 mey region asia
4.28.502.1 is the RUU you are trying to use? That appears to be one for ATT, which is an American cellular service provider. You should be able to find something here http://forum.xda-developers.com/showthread.php?t=2701376
htc on m8 how unroot and delete supersu
how unroot and delete supersu i am not able to find my htc one m8 arabic version
I want to restore orignal stock 4.4.4 kitkat
I can't guess which update you need. Since you don't know, the best way is to boot to the bootloader and use fastboot (if you don't have it, Google : Minimal ADB and Fastboot). Once in bootloader use the terminal or command prompt to enter : fastboot getvar all. Copy and paste results here and leave out your IMEI and serial number for security's sake.
es0tericcha0s said:
I can't guess which update you need. Since you don't know, the best way is to boot to the bootloader and use fastboot (if you don't have it, Google : Minimal ADB and Fastboot). Once in bootloader use the terminal or command prompt to enter : fastboot getvar all. Copy and paste results here and leave out your IMEI and serial number for security's sake.
Click to expand...
Click to collapse
my htc datail
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.21331147A1.06G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B67000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 56f9ae32
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.046s
Like I said in my last post, you should not post your IMEI / serial number.
I believe this RUU should work and is Lollipop 5.0.2 https://www.androidfilehost.com/?fid=95916177934518148
You must relock your bootloader since you are S-On. In bootloader, use fastboot command: fastboot oem lock
How to s-off and plz tel me how to install ruu zip file
Thanks
htc on m8
How to s-off and plz tel me how to install ruu zip file
Thanks
S-Off might not be the best idea for someone who isn't comfortable with how to search for information on XDA or Google. Double click the RUU exe and follow directions. S-Off can be achieved with Sunshine. It is a paid app. There are no free solutions anymore.
htc on m8
Dear
This on zip file not img
Did you try extracting it? It's probably compressed for easier uploading / downloading.
htc on m8
Yes i try to extrac
Ok can i use with adb fastboot comnd to install ?
I will try to flash but not load any ruu
I flash with fastboot error come
Target reported max download size 1826418688 byets
Error cannot load 0P6BIMG.zip no error
Thanks
htc one m8
i try but fastboot come like this
C:\Users\TOSHIBA\Desktop\adb fastboot-s.off\adb fastboot>fastboot flash zip 0P6B
IMG.zip
target reported max download size of 1826418688 bytes
error: cannot load '0P6BIMG.zip': No error
syedfawaf said:
i try but fastboot come like this
C:\Users\TOSHIBA\Desktop\adb fastboot-s.off\adb fastboot>fastboot flash zip 0P6B
IMG.zip
target reported max download size of 1826418688 bytes
error: cannot load '0P6BIMG.zip': No error
Click to expand...
Click to collapse
Sorry, didn't realize it was actually the zip as most RUUs are exes. To load the RUU zips you have to boot to the special fastboot screen by using the command:
fastboot oem rebootRUU
then flash the rom zip like you were trying. It might fail after the bootloader, which is common, you just need to immediately redo the command and it should go through.
no dear same error
Is the zip in the same folder where you are running the commands?
Yas zip is same folder