Support for 4.4.3 has been discontinued due to 4.4.4 being released. See 4.4.4 port below
http://forum.xda-developers.com/showthread.php?t=2828366
Hey top snake nice job I installed and here are the issues I have found.. First when making a call you lose data and second changing to cdma doesn't stick at least not for me other then those two issues you did one hell of a job. Also no issue like your 4.4.2 port when going back to 4.4 which had the data partition issues.
Sent from my XT1080 using XDA Premium 4 mobile app
bigv5150 said:
Hey top snake nice job I installed and here are the issues I have found.. First when making a call you lose data and second changing to cdma doesn't stick at least not for me other then those two issues you did one hell of a job. Also no issue like your 4.4.2 port when going back to 4.4 which had the data partition issues.
Sent from my XT1080 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks for trying it out! Im thinking the data loss may be an issue with the source being T-Mobile. Odd that CDMA didn't stick, it does for me.
MIRRORS
Please, use "Save to my DropBox" option instead "Download", when getting file from Dropbox!
Dropbox mirror
GoogleDrive mirror
are there any changes in the new modem ?
pujdo1 said:
are there any changes in the new modem ?
Click to expand...
Click to collapse
i think so, but still using AT&T radio. As for me, it works better in GSM networks.
Thanks so much for this! The only problem with it is Touchless Control is broken for commands like "Find my phone" because it freezes the device for a bit and then restarts System UI. Also, after calling upon Touchless Control more than three times, it never worked again until after a reboot. Other than that, it's really great!
sorry but i have some more questions:
1. what does the displayfix "really" (disable onscreen buttons ?) ?
2. is it possible with this port to install OTA's from the moto x retail version (if they are released like a android 4.4.4 ota) ?
if not, have i to reflash a entire port like this again ?
3. what changes are made in the build.prop (in comparison to the original moto x one) ? i want to stay as "moto x", because the device compatiblity in the play store is higher with the moto x, as it is more widespread as the droid maxx.
pujdo1 said:
sorry but i have some more questions:
1. what does the displayfix "really" (disable onscreen buttons ?) ?
2. is it possible with this port to install OTA's from the moto x retail version (if they are released like a android 4.4.4 ota) ?
if not, have i to reflash a entire port like this again ?
3. what changes are made in the build.prop (in comparison to the original moto x one) ? i want to stay as "moto x", because the device compatiblity in the play store is higher with the moto x, as it is more widespread as the droid maxx.
Click to expand...
Click to collapse
1) on screen buttons and drivers for hw buttons
2)no. It will fail
3) build numbers, exploits, device reporting
So, i've installed this port, installed buttons fix, flashed Faux Kernel for 4.4.2 (colours works fine on it)))
Still trouble with Active Display
Does anybody have an idea how to fix it?
summer.cat said:
So, i've installed this port, installed buttons fix, flashed Faux Kernel for 4.4.2 (colours works fine on it)))
Still trouble with Active Display
Does anybody have an idea how to fix it?
Click to expand...
Click to collapse
Did you try to uninstall and reinstall?
Topsnake said:
Did you try to uninstall and reinstall?
Click to expand...
Click to collapse
I couldn't, because update for Active Display is not available from GPlay...
service just shows current time.. not notification shortcut, nor notification details((
in all other firmware works fine, especially with faux kernel + faux control
But i reverted back to stock ROM, due to Active Display bug....
I've put together a small patch to allow use of the T-Mobile 4.4.3 stock ROM on the Droid Mini. This is basically an updated build.prop, the same lights blob and keyboard tweak included in the first post, with additional binary blobs collected by @mainbord for the Droid Mini.
No guarantees. Use at your own risk, etc, etc.
Rottgrub said:
I've put together a small patch to allow use of the T-Mobile 4.4.3 stock ROM on the Droid Mini. This is basically an updated build.prop, the same lights blob and keyboard tweak included in the first post, with additional binary blobs collected by @mainbord for the Droid Mini.
No guarantees. Use at your own risk, etc, etc.
Click to expand...
Click to collapse
Very nice. Will merge with the first post
bigv5150 said:
Hey top snake nice job I installed and here are the issues I have found.. First when making a call you lose data and second changing to cdma doesn't stick at least not for me other then those two issues you did one hell of a job. Also no issue like your 4.4.2 port when going back to 4.4 which had the data partition issues.
Sent from my XT1080 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
summer.cat said:
Please, use "Save to my DropBox" option instead "Download", when getting file from Dropbox!
Click to expand...
Click to collapse
pujdo1 said:
are there any changes in the new modem ?
Click to expand...
Click to collapse
New Build available for you guys! Active display fixed. Baseband updated.
Rottgrub said:
I've put together a small patch to allow use of the T-Mobile 4.4.3 stock ROM on the Droid Mini. This is basically an updated build.prop, the same lights blob and keyboard tweak included in the first post, with additional binary blobs collected by @mainbord for the Droid Mini.
No guarantees. Use at your own risk, etc, etc.
Click to expand...
Click to collapse
New Build available
Rottgrub said:
I've put together a small patch to allow use of the T-Mobile 4.4.3 stock ROM on the Droid Mini. This is basically an updated build.prop, the same lights blob and keyboard tweak included in the first post, with additional binary blobs collected by @mainbord for the Droid Mini.
No guarantees. Use at your own risk, etc, etc.
Click to expand...
Click to collapse
does the bootloader have to be unlocked?
liongood9 said:
does the bootloader have to be unlocked?
Click to expand...
Click to collapse
Yes it does
Related
UPDATED: added version 1.14 to this post (and pushed it to Play Store as well)
please let me know if it works good (doesn't reboot) when applying settings on stock rooted kernel.
Hi!
I'm trying to make my app TouchScreenTune to work on default kernel on ATT version of Galaxy Note. But since I don't have it myself (I have European Note), I obviously need some feedback from people with I717
This is for GingerBread kernel (however in the case on N7000 it works on ICS as well)
Could you please check if ToouchScreenTune test version attached to this post works with your rooted kernel? Especially I'm interested if it works with stock kernel. Just try to adjust SPen position to some extreme offset - you will immediately see it when pressing screen with SPen.
Thanks.
P.S. Description of the app from the Market after the break
----------
Market link: https://play.google.com/store/apps/details?id=com.vital.tst.n7000&hl=en
*Requires Root*
*Currently supports Samsung Galaxy Note (tested on N7000), Galaxy S2*
*THIS IS TRIAL VERSION!!! FULL VERSION REQUIRES REGISTRATION AND IS PAID*
NorthAmerican/AT&T Note users - see comment regarding kernel below!!!!
TouchScreenTune application allows you to fine-tune settings of phone's touchscreen and calibrate Pen cursor position for every screen orientation (portrait/landscape...). (S-pen calibration obviously works only for Note)
It allows to dramatically improve responsiveness and sensitivity of touchscreen.
If you are using screen protector on your phone, the application will allow to raise screen sensitivity, so there will be no responsiveness impact from using screen protector.
This application allows you to calibrate amount of touch movement, when actual reporting of scrolling starts. That allows more smooth feeling of the interaction with the touch screen.
Without this application you cannot precisely draw or click small items with Pen because it reports position incorrectly - few millimeters away from the actual touch point. But this application allows you to precisely calibrate position of Pen touch on the screen. (Galaxy Note only)
Some common problems:
When first starting there should be popup from SuperUser application with request to get Root access. Some people say that sometimes it doesn't appear. In that case try starting the SU program first, and then this application.
This application supports standard Samsung firmwares - with custom kernels it may not work (however I have successfully tested it with some custom kernels)
Custom kernels: app requires kernel with KALLSYMS, so ask developer of your kernel to include this in his config when building kernel: CONFIG_KALLSYMS=y, CONFIG_KALLSYMS_ALL=y
Known issues: if when first starting application it seems to be not responding, and dialog asking to force close app comes - choose wait. This should happen only on first run.
Hi- I read sonewhere TST does not work with the stock att kernel. You need to root and flash a kernel that supports it from the development section.
Sent from my SAMSUNG-SGH-I717 using xda premium
I have the paid version and run rooted with custom kernel and can't get it to work
Sent from my note running a jelly bean key lime pie hybrid OS
It does not appear to change anything. I set the x and y offsets to 300 each and the target did not change position relative to the pen placement.
bendotson said:
Hi- I read sonewhere TST does not work with the stock att kernel. You need to root and flash a kernel that supports it from the development section.
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
That's why I'm posting this test version here - I want to make it work
I have compiled it to work with kernel sources that were published by Samsung.
lactardjosh said:
It does not appear to change anything. I set the x and y offsets to 300 each and the target did not change position relative to the pen placement.
Click to expand...
Click to collapse
That is with stock kernel? Are you rooted? Have you seen any error message when you changed values and hit Apply?
vitalij said:
That is with stock kernel? Are you rooted? Have you seen any error message when you changed values and hit Apply?
Click to expand...
Click to collapse
My apologies...I should have been more specific about my set up.
I'm using a custom ROM based off the leaked ICS 4.0.3 firmware. I'm rooted with SuperSU, but the kernel is stock since we don't have source for the ICS kernel yet.
I do get an error message
ERROR: Can't read SPEN settings? No ROOT Permissions? Unsupported firmware?
Click to expand...
Click to collapse
Is this for GB or ICS?
lactardjosh said:
My apologies...I should have been more specific about my set up.
I'm using a custom ROM based off the leaked ICS 4.0.3 firmware. I'm rooted with SuperSU, but the kernel is stock since we don't have source for the ICS kernel yet.
I do get an error message
Is this for GB or ICS?
Click to expand...
Click to collapse
This is compiled for GB, however in the case of N7000 it works on leaked version of ICS as well. However judging from your error - either ICS leak lacks Kallsyms support or driver is much changed compared to GB version.
I have also uploaded one more test version - which possibly may work better.
vitalij said:
This is compiled for GB, however in the case of N7000 it works on leaked version of ICS as well. However judging from your error - either ICS leak lacks Kallsyms support or driver is much changed compared to GB version.
I have also uploaded one more test version - which possibly may work better.
Click to expand...
Click to collapse
Parsing error when trying to install the new version.
Stock GB kernel does not have KALLSYMS. It was added for some custom kernels, though.
My guess is that ICS does not have this either.
lactardjosh said:
Parsing error when trying to install the new version.
Stock GB kernel does not have KALLSYMS. It was added for some custom kernels, though.
My guess is that ICS does not have this either.
Click to expand...
Click to collapse
Uploaded new version again - now it seems to be OK.
Regarding Kallsyms - stock actually should have it - at least according to kernel sources published by Samsung, and also some people reports. So it would be really nice if somebody with stock kernel could test it.
vitalij said:
Uploaded new version again - now it seems to be OK.
Regarding Kallsyms - stock actually should have it - at least according to kernel sources published by Samsung, and also some people reports. So it would be really nice if somebody with stock kernel could test it.
Click to expand...
Click to collapse
Same error with 1.13 on ICS
ERROR: Can't read SPEN settings? No ROOT Permissions? Unsupported firmware?
Click to expand...
Click to collapse
I bought the app from you off the market.
It did work on the holo kernel.
However, on Seraphim ICS build it doesn't.
I actually uninstalled the program.
The spen is off by 1 square in s-memo. Not too bad.
ICS is much better about the sensitivity and tracking
I had them set to 0 and 25 as recommended but like I said that was too much so I just uninstalled.
does not work on un-rooted, stock att ...
Good to see you hear, i loved using this on GB.
Running ICS from the collective, it loads up but won't apply any requested changes.
May have to wait till the kernel is released and KALLSYMS is added in.
Hi vitalij,
I am running a rooted but otherwise totally stock at&t galaxy note. I tested the application but couldn't notice a difference with the spen settings, even moving them to the extremes.
I tested the application in the marketplace as well. It would open and let me adjust the settings (again, didn't notice a difference) but when I applied the changes my device would reset. I upgraded to the full version and the same thing happened. When I redownloaded the test version the reboot fixed itself, but the settings still don't make a difference on the pen.
Hope this helps!
Sent from my SAMSUNG-SGH-I717 using xda premium
I tested your second version and is working...what i did Ok from what I'm seeing I uninstalled super su and installed superuser in market,,the newest update allowed a superuser prompt..which I allowed.(.I hit back and the setting don't stick,if I hit home they do when I ..and go back in the values stick))..and is super responsive holy sh!t...I can't even type its so fast..lmao..gotta work with these settings.,am running gb unofficial rom on da_gv2 overclock kernel,...dev you have something good going here ...good luck with progress this app will be incredible
Captured screenshot..wont allow me to post...with su command..damn..
Su
Thanks Wish! Backing out with the home button instead of the back button fixed the app for me. Awesome app vitalij!
Sent from my SAMSUNG-SGH-I717 using xda premium
Are you on GB or ics?
AOSP 4.2
xt910
One epic fail in vendor name
No ICS precompiled files, no JB 4.1 precompiled files.. no custom kernels...
the only pure Google sources (and SGX drivers of course)
Do all the features work in this build?
hmmm...I can't believe that one guy makes 4.2 run on Razr without any help, just two days after source was released.
Or did you ported this rom to the Razr? Where is an real proof and why that less information? Please make it clear! And if you like to work together with us, contact me.
btw i got it runned in 5 hour after manifest comes.
And no, this is NOT fully worked fw. But had ui worked as well as many basic subsystems
Sent from my XT910 using xda app-developers app
Why don't you show us some more?
Like they said in a forum i used to read.
screen or fake ! !
This screen is just notice that no problem with 4430+4.2
What do you want to see?
Sent from my XT910 using xda app-developers app
Do not work on net subsystem yet. Have no time... iwill try today work on it...
Sent from my XT910 using xda app-developers app
Well if this is for real, first thanks.
Second if you dont have too much time , you should set up a git and share your work i m sure you ll get help.
And could you show us quick settings from status bar ?
sevenup30 said:
Well if this is for real, first thanks.
Second if you dont have too much time , you should set up a git and share your work i m sure you ll get help.
And could you show us quick settings from status bar ?
Click to expand...
Click to collapse
BTW point me to project that have a problem with 4.2 and I will push needed patches....
It seems like there are no screenshot bug on stock kernel, interesting.
lukas77 said:
It seems like there are no screenshot bug on stock kernel, interesting.
Click to expand...
Click to collapse
I do not like custom kernels but what problem are you talking about ?
silentjet said:
I do not like custom kernels but what problem are you talking about ?
Click to expand...
Click to collapse
I didn't say I have problem with this. On all 4.1 ROMs is screen shot and rotation bug, picture is downscaled, on 4.2 is OK. Nice job dude
great work, get in contact with other developers so u can hopefully continue development for xt910:victory:
Which recovery do you use to install it?
Wombatino said:
Which recovery do you use to install it?
Click to expand...
Click to collapse
???
installed via bootmenu
silentjet said:
???
installed via bootmenu
Click to expand...
Click to collapse
He wants to know how do you flash it to the phone for testing or whatever...For which recovery do you build this rom?
awesome I hope 4.2 comes to this device really looking forward to it
silentjet said:
BTW point me to project that have a problem with 4.2 and I will push needed patches....
Click to expand...
Click to collapse
or maybe setup a new one. Pure AOSP + your patches.
My project here is about making a spyder ROM with zero dependent on 3rd-party git.
- Upstream source is either AOSP or CyanogenMod.
- Overlay git for framework changes
- CM style device tree. Prebuilts binaries is pull directly via adb / image file (system.img)
Thanks for the screenshots mate, and i apologize for thinking it was a fake. (you know we've been sceptical over here )
Anyway, i think you should team up with whirleyes, sharing work will make more dev to help you i think.
I'm really interested to know what you did you make pure aosp booting on xt910.
[ROM][Nov 09] Navalynt's Optimized Base | RC1 Update 2 | 1.23.1540.1 | T6UL (GSM Only)
Introduction
My intention with this ROM is to create an optimized but stable base that I can use for my daily ROM and from which others can customize for their own ROM releases. I have no intention of spending large swathes of my time with programming and debugging for custom features, many of which can be added through the Xposed Framework. As much as I would like to do that I just don't have the time so please don't take offense to the fact that I have no feature request section and may just plain say no if asked to add something.
Click to expand...
Click to collapse
Please feel free to take this base and build off of it to create your own custom ROMs!
Features
Android 4.3 "Jelly Bean"
HTC Sense 5.5
ROMSoftware Version 1.23.1540.1
Kernel Version 3.4.10
Unsecure Kernel
Deodexed
* Rooted w/ Koush's opensource Superuser
Most HTC logging stuff removed (not sure if I got it all)
wifi.supplicant_scan_interval=180 (battery savings)
ViPER4Android FX
1% Incremental Battery and Charging Animation (thank you Onepagebook!)
Init.d script support
Init.d scripting from baadnewz from his InsertCoin series of ROMs which does the following:
zipalign /data, /system/app, and /system/framework on boot for APKs that have not been zipaligned already
SQLite database vaccum
Fixing permissions on boot
Unmounting the debug filesystem
Click to expand...
Click to collapse
ViPER4Android FX
Version 2.3.1.3
A special shout-out and thank you to ViPER520 and zhuhang for creating such an awesome audio enhancement and giving me permission to include it with my ROM!
Official Website for ViPER4Android FX
XDA-Developer thread
It is HIGHLY RECOMMENDED that if you are not already familiar with ViPER4Android FX that you read through the SETTINGS EXPLAINED and FAQ sections of their website!
Click to expand...
Click to collapse
Apps installed to /data (so you can easily uninstall them):
ES File Explorer
Xposed Framework Installer
Adaway
Google Keyboard (from KitKit)
** Apps installed to /system/app for security reasons:
Cerberus
** KitKat Apps on /system/app:
Updated Google Play Books
Updated Gmail
Updated Hangouts
Updated Play Games
Calculator
Gallery
Camera (in addition to the Sense 5.5 camera, currently FC on PhotoSphere though)
QuickOffice (replaces Polaris)
Google Keep
Desk Clock
* If you want to use SuperSU instead, click HERE to download the zip for version 1.65 and flash it after the ROM
** system/apps stuff can be removed using TitaniumBackup if there is something you don't want
The associated baseband with this ROM is 4T.21.3218.04_10.15.1718.01L. I have a copy of the firmware to flash, however, this will only work if your device is S-OFF. If you have an S-OFF device please PM me and I can provide this for you.
Click to expand...
Click to collapse
**WARNING**
Currently if you unlock the bootloader using HTCDev.com it will disable your fingerprint scanner! You will need to use scotty1223's method HERE to fix the problem.
YOU HAVE BEEN WARNED
Click to expand...
Click to collapse
How to Unlock the Bootloader:
http://forum.xda-developers.com/showthread.php?t=2540004
How to install a Custom Recovery
There are two current options from Flyhalf205
TWRP v2.6.3.0
CWM v6.0.4.4 (touch or classic)
It doesn't really matter which one you use, it's all personal preference. Just download one, reboot to the bootloader (Power + Vol Up), and flash using the command fastboot flash recovery recovery.img
After flashing the recovery you'll want to reboot into the recovery and IMMEDIATELY make a NANDROID BACKUP. There are no RUUs available (that I know of) so if something goes wrong you need a backup you can restore! My personal recommendation is that you backup to an external SD card and also keep a copy of the clockworkmod or twrp backup store on your computer for safe keeping.
Click to expand...
Click to collapse
How to Install the ROM
ROM performs a FULL WIPE (except for internal/external SD storage)
First of all, have you made your NANDROID BACKUP yet?
Copy the ROM to either Internal or External SD (doesn't really matter)
Reboot to recovery and flash the zip file!
FULL ROM DOWNLOAD (RC1 Build 2)
Update from RC1 Build 1 to RC1 Build 2
Hotfix 1 for Build 2 - Flash this if you are having issues with SystemUI force closing after a clean install of RC1 Build 2
Click to expand...
Click to collapse
No source links available for kernel or ROM as they are stock from HTC which has not yet released source.
XDA:DevDB Information
Navalynt Optimized Stock, a ROM for the HTC One Max
Contributors
navalynt
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.4.x
Version Information
Status: No Longer Updated
Current Beta Version: RC1 Update 1
Beta Release Date: 2013-11-09
Created 2013-11-03
Last Updated 2014-02-03
Reserved
Changelog
Initial release as RC1
RC1 Update 2
Added ViPER4Android
Updated SystemUI for 1% battery mod with full 100 charging animations
Removed fstrim on boot (redundant)
Removed Kid Mode (wasn't working right under /data/app)
Removed Titanium Backup (please install from the Play Store if needed)
Updated OP to reflect that Google Keyboard is in /data/app not /system/app
Full ROM now wipes Cache and Dalvik-Cache only (so do a FULL WIPE manually if coming form stock)
Full ROM download updated and an incremental update from Build 1 to Build 2 is also posted
Click to expand...
Click to collapse
Known Issues \ Bugs \ Problems \ Weird S**t
First reports are that this ROM will install on an O2 based handset but the cellular radio does not work unless the ROM is installed with TWRP recovery.
Special Thanks
First to baadnewz for always answering my questions and just being an all around excellent person
Flyhalf205 for making the custom recoveries, without which you would not be able to flash my ROM
Onepagebook for providing the 1% battery mod
dsixda for a most excellent Android Kitchen which allowed me to very quickly customize and deodex
ViPER520 and zhuhang for ViPER4Android FX and permission to include it with my ROM
The Moderators d Staff of XDA-Developers for continued support to the entire community
Donations
Nope, sorry, I don't accept them. Just hitting the thanks button is enough to let me know I'm appreciated.
Reserved
where did you get the base ?
was it preloaded on your phone ?
can i use this rom on a german o2 phone ?
my base is 1.20.207.1
B-Man2005 said:
where did you get the base ?
was it preloaded on your phone ?
can i use this rom on a german o2 phone ?
my base is 1.20.207.1
Click to expand...
Click to collapse
I can't really talk about the base except that the 1540 designation in the build number says it's a developer edition. The only way to know if it's going to work on your phone is to try it out. Just make a nandroid first so if it doesn't work you can just restore your stock ROM.
It should work so long as your phone model is t6ul.
Uh oh
Hoping you can help me Mr developer
Flashed with success, no bootloop, howether,
I've got no SIM or network access and in mobile data tab everything is blacked out. Upon further investigAting I've also lost my imei
---------- Post added at 03:46 AM ---------- Previous post was at 03:10 AM ----------
Flashed my backup back and network is working so all good
I'll still await your input as to how to get around the issue when flashing that rom
This is a new phone so people please back up like op said, it will save you
garyfl said:
Uh oh
Hoping you can help me Mr developer
Flashed with success, no bootloop, howether,
I've got no SIM or network access and in mobile data tab everything is blacked out. Upon further investigAting I've also lost my imei
---------- Post added at 03:46 AM ---------- Previous post was at 03:10 AM ----------
Flashed my backup back and network is working so all good
I'll still await your input as to how to get around the issue when flashing that rom
This is a new phone so people please back up like op said, it will save you
Click to expand...
Click to collapse
What wireless network are you on?
navalynt said:
What wireless network are you on?
Click to expand...
Click to collapse
If you mean phone network then it's giffgaff which runs on the o2 network
UK unlocked 16gb max
garyfl said:
If you mean phone network then it's giffgaff which runs on the o2 network
UK unlocked 16gb max
Click to expand...
Click to collapse
The RIL files within the ROM are for US bands, so from what you are describing it's possible this ROM simply will not work with your carrier.
Edit: Added as a known issue for now. It would be awesome if at least one more person on O2 or an O2 based MVNO would test and verify.
After half day running, the Rom is quite stable, smooth, thanks guy.
Sent from my HTC One max using xda app-developers app
navalynt said:
The RIL files within the ROM are for US bands, so from what you are describing it's possible this ROM simply will not work with your carrier.
Edit: Added as a known issue for now. It would be awesome if at least one more person on O2 or an O2 based MVNO would test and verify.
Click to expand...
Click to collapse
Because my phone is unlocked it wouldn't matter if I used Vodafone, tmobile or 3, the mobile internet settings were completely greyed out and, when I inputted a code into dialer and went to phone settings it was set to wcdma
garyfl said:
Because my phone is unlocked it wouldn't matter if I used Vodafone, tmobile or 3, the mobile internet settings were completely greyed out and, when I inputted a code into dialer and went to phone settings it was set to wcdma
Click to expand...
Click to collapse
Unlocked just means you can put in another carriers SIM card. If your phone wasn't unlocked you would get a popup asking to enter a subsidy code.
The RIL is the radio interface layer. In simplest terms it acts as the go-between for the operating system and the actual cellular radio on the phone. If the ROM has a RIL file that is not compatible with the radio in your phone then cellular data will simply not work.
That is what the problem sounds like to me because restoring your nandoid (going back to stock) fixed the issue. I've tested this ROM on several handsets with several SIM cards and had reports via PM from several users that this ROM is working fine for them so the only thing I can think of an incompatibility between the RIL and cellular radio.
We're still in the infant stages of development for the HTC One Max so there's probably going to be several other pronounced differences between handsets depending on where they are sold.
One thing you could try is pulling these files from your stock ROM and pushing them to the custom ROM:
/system/lib/libhtc_rilhook.so
/system/lib/libril.so
/system/lib/libril-qc-qmi-1.so
/system/lib/libril-qcril-hook-oem.so
The easiest way to do this would be use adb pull on your computer while booted as stock, then replace those files in the ZIP for the custom ROM before transferring it to your phone to flash.
If you try this please post what happens!
could you include beats from the 4.3 rom of the htc one ?
B-Man2005 said:
could you include beats from the 4.3 rom of the htc one ?
Click to expand...
Click to collapse
How about Viper4Android instead. There are A LOT of extra options to customize the audio with that than with Beats (which is really just a equalizer preset). Plus it's still being actively developed and the developers don't mind integration with custom ROMs so long as proper credit is given for the work.
navalynt said:
How about Viper4Android instead. There are A LOT of extra options to customize the audio with that than with Beats (which is really just a equalizer preset). Plus it's still being actively developed and the developers don't mind integration with custom ROMs so long as proper credit is given for the work.
Click to expand...
Click to collapse
oh SOUNDS ^^ promissing
come on ... build it in
thanks
B-Man2005 said:
oh SOUNDS ^^ promissing
come on ... build it in
thanks
Click to expand...
Click to collapse
I'll see if I can put together a supplimental ZIP file tomorrow which adds Viper4Android and update a FAQ section with info on it as well some info on using ROM Cleaner v2.0 to get rid of the Sense elements that are unwanted. I personally get rid of most of it but I don't want to maintain a separate "slim" rom or start maintaining a fancy Aroma installation unless it's absolutely necessary.
Sent from my HTC One using Tapatalk
navalynt said:
I'll see if I can put together a supplimental ZIP file tomorrow which adds Viper4Android and update a FAQ section with info on it as well some info on using ROM Cleaner v2.0 to get rid of the Sense elements that are unwanted. I personally get rid of most of it but I don't want to maintain a separate "slim" rom or start maintaining a fancy Aroma installation unless it's absolutely necessary.
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
i normally delete stuff i dont want manually in titanium ... but thanks could be halpfull for all others
Wow the first rom for the phone.. Wow
Sent from my HTC One X+ using XDA Premium 4 mobile app
pradeepvizz said:
Wow the first rom for the phone.. Wow
Sent from my HTC One X+ using XDA Premium 4 mobile app
Click to expand...
Click to collapse
btw... you can disable your fstrim mod...
its on android by default since 4.3
B-Man2005 said:
btw... you can disable your fstrim mod...
its on android by default since 4.3
Click to expand...
Click to collapse
Oh yeah
First off I do not own an i605 myself but have the l900 (sprint) which is almost the same device. Hardware wise there is only a tiny difference which is in the partition setup. Sprint uses a different data partition mccblk0p17 where all other N2's use mccblk0p16 the other is our mccblk0p16 which contains special files used by sprint on their stock roms (just to make our lives more difficult). I have been working with @lacoursiere18 on a few of my projects for the l900 and we tried to port an earlier version of MIUI for our devices before he got busy with school. Since then I have successfully ported over MIUI to the l900 and i605. Brian has been nice enough to test build out and confirm it works great on the i605. So now I am releasing this for your flashing pleasure. I also took a little extra time and modified Plasma 2.55 to work with MIUI and gotten permission from @ffolks (a few months ago) to post the modified kernel for everyone to use.
Well everyone (l900 users and those who browse the l900 forums) already knows I hate doing OP's so they stay pretty simple and this wont will be any different. Also MIUI users know that there are weekly updates but since this is a port and I have so many projects going on. It might be a month or two between my releases.
This is ported from the N7100 which is based on Omni rom. Original rom is located here
http://en.miui.com/download-35.html
and is the one by mdiary. So far only issues I know of it call recorder does not work (just says being used by another app) and you have to go into settings..mobile networks..network mode and change to CDMA+LTE/EvDO to enable 4g after every boot. If you flash any gapps package you will lose gps. If you continue to read the OP I will give instructions on how to setup your MIUI rom to get the most out of it.
So I took the base and turned it into a full featured rom with a whole mess of add-ons and tweaks.
Included items/tweaks/mods
Adfree (although I already have a host list created)
dolphin browser
dolphin jetpack plugin
adobe flash 11.1 kk
es file manager
LG G3 Keyboard and a few themes
WSM (MIUI Xposed)
Mi-Tools module (like wanam or gravity box)
Paid themes module (all miui themes are free)
AOSP Dash Clock widget
AOSP Calender widget
Terminal emulator
A bunch of build.prop tweaks
A bunch of init.d scripts (to enable them continue reading the OP)
Bug list
MIUI-i605 4.9.5
Any Omni bugs
call recording does not work
If you flash any gapps besides mine you will lose gps
Change Log
MIUI-i605 4.9.5 9-8-14
First port of rom
Downloads
Flashing instructions
1. Backup internal sdcard to you PC or external sdcard (this will really help prevent issues
2. Boot into recovery and backup current rom
3. Do a factory reset (if using philz/cwm do clean for new rom)
4. Format/wipe internal sdcard (if you dont do this and have issues first thing I will say is format it)
5. Reboot back into recovery (this will create your internal sdcard dir structure)
6. Flash MIUI and boot it
7. After initial setup power off and boot into recovery
8. Flash Gapps (please do it in this order or you will end up wiping and reflashing)
9. Boot into rom
10. Go to post #3 and follow those steps
Do not flash any kernel besides the modified Plasma or your rom wont boot. If there is an AOSP kernel you want to use let me know and I will make it compatible.
Plasma 2.55 MIUI edition Synapse is included in this flashable zip
https://www.androidfilehost.com/?fid=23622183712469118
MD5sum 13ffea951345225e8ad0abdaf2f279d4
MIUI Gapps
https://www.androidfilehost.com/?fid=23622183712469103
MD5sum c7bb4c995d6116a7c88977fe4821af10
MIUI 4.9.5
https://www.androidfilehost.com/?fid=23622183712469104
MD5sum 70bd84e1e6f65786a8ca8836b6908225
Importaint tips for MIUI
Simple things for now
1. Open security (located on first screen)..permissions.. and turn on root permission
2. Open WSM tools (miui xposed) and click install DO NOT reboot yet
3. At top of the screen you will see < Manage click here and enable all three modules
4. Reboot phone and setup Mi-Tools to your liking and reboot for settings to be applied
5. Open settings... general settings tab... mobile networks... network mode... set to CDMA+LTE/EvDO (will have to do this every boot to have 4g(LTE)
6. If you want to use a different launcher ( I dont like the iOS style launcher myself ) open settings... general settings... display... default launcher.. and select launcher3 or whatever you have installed yourself
7. Setup your google account and enjoy
Some things are in Chinese
in settings... general settings.. stock settings you will see two chinese options the top one is your advanced settings for samsung devices the bottom one is your Mi-POP settings (that circle with the back icon)
BELOW IS A NICE GUIDE FOR MIUI
http://www.hardwarezone.com.sg/m/feature-complete-guide-xiaomis-miui-v5-os
Things that are reported as issues
If you are having gps issues try this.
travisn000 said:
I have been using Maverick Pro from the play store and find it gets GPS lock with google maps from play store also installed... Once maverick has a lock other apps seem to work as well.
Here is the free version:
https://play.google.com/store/apps/details?id=com.codesector.maverick.lite
..i set my location setting to device only; the first time i used it it took a few minutes to lock, but its been very quick every time since.
The yellow dotted indicator in the bottom bar of the app shows number (16) of gps satellites found:
Click to expand...
Click to collapse
Themes that cause issues (random reboots, freezes, etc...)
material
last one
Thanks for the work you put in @jlmancuso and @lacoursiere18. Excited to give something new a try.
I'll give this a shot over the weekend.
Awesome good to see this ole device still getting some luv :good:
jlmancuso said:
last one
Click to expand...
Click to collapse
Thanks for the mention sir.. But I really had nothing to do with getting this working.. All you BRO!
razortaz18 said:
Thanks for the work you put in @jlmancuso and @lacoursiere18. Excited to give something new a try.
Click to expand...
Click to collapse
Not me.. @jlmancuso put all the work in.. Me and AOSP do not play nicely =)
Cmon TW version loll
Thanks!
Everything works just fine so far.little problems i had were just ignorance on my part.
Think its possible to do an agni kernel?
Thanks again for all the hard work!
Will this ota update. How well do themes work?
Sorry i missed the month or two line.
dudeicles said:
Everything works just fine so far.little problems i had were just ignorance on my part.
Think its possible to do an agni kernel?
Thanks again for all the hard work!
Click to expand...
Click to collapse
Give me a link and I will see what I can do. You willing to test?
rippedwarrior69 said:
Will this ota update. How well do themes work?
Click to expand...
Click to collapse
No ota. Themes work great although I did hear one did cause issues ( material ) but everyone I have tried worked fine. Any with issues I will post in 4th OP. As they are reported.
Sweet are you going to keep updating or is this the only version?
rippedwarrior69 said:
Sweet are you going to keep updating or is this the only version?
Click to expand...
Click to collapse
Read OP.
Sent from my SPH-L900 using XDA Premium 4 mobile app
jlmancuso said:
Give me a link and I will see what I can do. You willing to test?
No ota. Themes work great although I did hear one did cause issues ( material ) but everyone I have tried worked fine. Any with issues I will post in 4th OP. As they are reported.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2608679
Added a link to a very nice users guide for miui in post 3
Sent from my SPH-L900 using XDA Premium 4 mobile app
Thank you so much for this. This rom is beautiful and so much better then tw. I cannot thank you enough.
So, does Google maps not work with MIUI? Loaded maps and compass got GPS only lock but Google maps just kept searching for location.
Sent from my SCH-I605 using Tapatalk
I cannot get anything to get location. Keeps telling me my location services are off but they are not. Please help. Also mi tools will not move clock to center of status bar.
Since I am new and can't post in the development forum...
I really like this Rom but I can not get it to access any network functions either cell or data. I have tried both versions, waited when flashed and booted before rebooting, dirty flashed v1 to v2... but no matter what I get these:
SAE has stopped (after boot up)
Insert Sim Card to access network services (on sprint?)(when attempting to turn Mobile Data on)
and it says in the top bar "checking device status"
Can not update profile or prl
Please help...
What modem and baseband are you on?
Sim card not recognized
I have the same problem although SAE went away when I chose note 3 camera but still no service and Sim card not found!
Modem is listed as unknown and not even an option for baseband
jhunt75 said:
What modem and baseband are you on?
Click to expand...
Click to collapse
Baseband is N900PVPUDNH7
Where do I find Modem Info?
Its under settings and about device
UltraVegas said:
Baseband is N900PVPUDNH7
Where do I find Modem Info?
Click to expand...
Click to collapse
Someone correct me if I am wrong, but you need to be on OC5 lollipop.
Smart select fire Air Command doesn't seem to be working, does anyone how to fix? I used that pretty often
Sent from my SM-N900P using Tapatalk
12gage said:
Smart select fire Air Command doesn't seem to be working, does anyone how to fix? I used that pretty often
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
sac's rom is ancient and other people have made improvements to darkera's Lp note 5 port. Try Music of Life LP rom from main note3 forum. Since there's zero interest to port them to the sprint , install with XAS csc to allow apn editing. If you don't mind some bugs, try the S7 edge ports instead. Darkera, music of life, and others currently have s7 ports. They all have their own threads (darkera has his english thread at samsungvn) if you want to ask further questions about them.
12gage said:
Smart select fire Air Command doesn't seem to be working, does anyone how to fix? I used that pretty often
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
Try going to build.prop and changing the device name to:
ro.product.model=SM-G925F
I'm not sure why either wouldn't work they work fine for me but that is a setting I changed to get themes to work.
xsisbest said:
Try going to build.prop and changing the device name to:
ro.product.model=SM-G925F
I'm not sure why either wouldn't work they work fine for me but that is a setting I changed to get themes to work.
Click to expand...
Click to collapse
I'll try that, thank you again for all of your help. I have noticed that smart select is working after boot up and for a little while after, then it stops. Something must be killing it after a while, I've tried deselecting various Xposed modules but have stuck out so far figuring out the correct one. Hopefully this will work
12gage said:
I'll try that, thank you again for all of your help. I have noticed that smart select is working after boot up and for a little while after, then it stops. Something must be killing it after a while, I've tried deselecting various Xposed modules but have stuck out so far figuring out the correct one. Hopefully this will work
Click to expand...
Click to collapse
Try freezing sae 2.0 in titanium. Seemed like that had something to do with it as well. It's been a while.
darksavior said:
sac's rom is ancient and other people have made improvements to darkera's Lp note 5 port. Try Music of Life LP rom from main note3 forum. Since there's zero interest to port them to the sprint , install with XAS csc to allow apn editing. If you don't mind some bugs, try the S7 edge ports instead. Darkera, music of life, and others currently have s7 ports. They all have their own threads (darkera has his english thread at samsungvn) if you want to ask further questions about them.
Click to expand...
Click to collapse
Thank you, I did want to try Phronesis' 6.5 but just wasn't confident that I'd be able to get data to work. I seems like it works great with xposed, enough though there's so much baked in that most modules wouldn't be necessary. I wanted a 5.1.1 stable ROM, MM still seems to be too buggy, it seems like Sac's was the only alternative for me, but I guess I need to figure out the APN option to make others work with Sprint.