I read a couple diff root methods on google do any of them work
Sent from my SCH-I605 using XDA Free mobile app
Towelroot
TowelRoot should work with 4.4
But will it trip Knox that's where its up in the air
Sent from my SCH-I605 using XDA Free mobile app
I searched around and can't find anything either. Friend of mine got replacement now he's screwed.
Sent from my SCH-I605 using XDA Premium 4 mobile app
towelroot
xRoach said:
TowelRoot should work with 4.4
Click to expand...
Click to collapse
No...towelroot will NOT work for sch-i605 at all. Device is not supported. There is no root method that i am aware of at this point for us. I check in with xda everyday just hopping.:crying:
---------- Post added at 11:09 AM ---------- Previous post was at 11:03 AM ----------
As of now guys we all are stuck with a locked and stock 4.4 sch-i605. When or if they find a method i dont know if knox would be a huge deal at that point. I rooted my wifes sch-i747 (att s3) and supersu disabled knox no problem. Seems that the devs may have moved on to other projects. Lets just hope SOMEONE gets around to our device. --waiting patiently--:angel:
Considering that Knox is the premier security program to be included on every Android L phone not just Samsung, I doubt the amount of time needed to circumvent is not worth the effort on the 605. Don't hold your breathe that we will ever get root.
Sent from my SCH-I605 using XDA Free mobile app
the only thing you can do (and idk if everyone can do it) is to odin flash back to 4.3 (MJ9) and then root from there.
unfortunately that doesnt include a bootloader unlock. but then you can safestrap and install /any/ touchwiz rom
Znomon said:
the only thing you can do (and idk if everyone can do it) is to odin flash back to 4.3 (MJ9) and then root from there.
unfortunately that doesnt include a bootloader unlock. but then you can safestrap and install /any/ touchwiz rom
Click to expand...
Click to collapse
Can you confirm if you've actually been able to successfully do this? If you have, then this would be great news for those who want root, but took the OTA up to 4.4.2.
Sent from my SCH-I605 using XDA Premium 4 mobile app
mattnmag said:
Can you confirm if you've actually been able to successfully do this? If you have, then this would be great news for those who want root, but took the OTA up to 4.4.2.
Sent from my SCH-I605 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes, I did this myself on my phone before I switched out the motherboards.
From ND7, you can flash back to MJ9, and then you can root, and then use safestrap to install certain specific ROMs
I will edit this post if i find a link to a tutorial
Damn I downgraded from ND3, not ND7, my apologies.
Here is the Link anyway http://forum.xda-developers.com/showthread.php?t=2752360
I don't have a way to test if there is a way to downgrade.
Znomon said:
Yes, I did this myself on my phone before I switched out the motherboards.
From ND7, you can flash back to MJ9, and then you can root, and then use safestrap to install certain specific ROMs
I will edit this post if i find a link to a tutorial
Damn I downgraded from ND3, not ND7, my apologies.
Here is the Link anyway http://forum.xda-developers.com/showthread.php?t=2752360
I don't have a way to test if there is a way to downgrade.
Click to expand...
Click to collapse
Cool. Thanks for the confirmation. I knew you could go from ND3 back to MJ9, but I had read somewhere else where someone speculated that you couldn't revert back to MJ9 from ND7 due to the locked bootloader issue... I'm still on 4.1.2 with unlocked bootloader, so I can't test it either.
Related
Im asking if there's any fool proof ways to root this configuration because i just bought the phone and dont wont to brick it like my s3 hard bricked. Any help or comments appreciated, thinking about just updating to 4.3 and waiting for a root method with that.
Read this. Used this guide for both my gs4's with zero issues
http://forum.xda-developers.com/showthread.php?t=2290798
Sent from my SCH-I545 using xda app-developers app
Scott792 said:
Im asking if there's any fool proof ways to root this configuration because i just bought the phone and dont wont to brick it like my s3 hard bricked. Any help or comments appreciated, thinking about just updating to 4.3 and waiting for a root method with that.
Click to expand...
Click to collapse
Don't update. You'll lose your ability to have a real custom recovery. Just stay on MDK and root. Then you can go ahead and flash a 4.3 ROM.
Toddricks said:
Read this. Used this guide for both my gs4's with zero issues
http://forum.xda-developers.com/showthread.php?t=2290798
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Should i factory reset and root before activating the phone with verizon?
I personally would just root, install custom recovery then wipe. After that pick a rom as most have ota updates disabled. Or install titanium backup pro and freeze the update apk's (I forget the file names)
Sent from my SCH-I545 using xda app-developers app
Toddricks said:
I personally would just root, install custom recovery then wipe. After that pick a rom as most have ota updates disabled. Or install titanium backup pro and freeze the update apk's (I forget the file names)
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Ok, is it safe to activate and root as long as i stop the OTA update?or just root and then activate? thanks for the replies by the way
Either way you do it just do not take the ota. I always root first and install custom recovery
Sent from my SCH-I545 using xda app-developers app
I'm a long time lurker and I use the search function for everything. Can't seem to find what I need.
I have a rooted me7 with safe strap..
I'd like to know what proper steps to take to got to mj7,which I believe is the last update.
Any information is much appreciated thank you.
Sent from my SCH-I545 using XDA Premium 4 mobile app
dsmendiola said:
I'm a long time lurker and I use the search function for everything. Can't seem to find what I need.
I have a rooted me7 with safe strap..
I'd like to know what proper steps to take to got to mj7,which I believe is the last update.
Any information is much appreciated thank you.
Sent from my SCH-I545 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Remove safestrap using the directions in the Safestrap thread (http://forum.xda-developers.com/showthread.php?t=2441441)
Then follow the "Update to VRUEMJ7 and Keep Root" thread (http://forum.xda-developers.com/showthread.php?t=2504408)
dsmendiola said:
I'm a long time lurker and I use the search function for everything. Can't seem to find what I need.
I have a rooted me7 with safe strap..
I'd like to know what proper steps to take to got to mj7,which I believe is the last update.
Any information is much appreciated thank you.
Sent from my SCH-I545 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Don't do it.
Get something that you can flash based on the newer firmware.
If you have safestrap and you like the ability, don't update to MJ7.
k1mu said:
Remove safestrap using the directions in the Safestrap thread (http://forum.xda-developers.com/showthread.php?t=2441441)
Then follow the "Update to VRUEMJ7 and Keep Root" thread (http://forum.xda-developers.com/showthread.php?t=2504408)
Click to expand...
Click to collapse
Thank you! Much appreciated.
Sent from my SCH-I545 using XDA Premium 4 mobile app
tech_head said:
Don't do it.
Get something that you can flash based on the newer firmware.
If you have safestrap and you like the ability, don't update to MJ7.
Click to expand...
Click to collapse
I did enjoy the ability, but then I started messing with xposed framework and noticed those tweaks are what I cared for. Touchwiz doesn't bother me and with the touchwiz tweaks it makes it similar to custom rom.
I do however will only go to mj7 if there is root method, which I've read there is..
Thanks for your input.
Sent from my SCH-I545 using XDA Premium 4 mobile app
Yea, but the root is an installer from China......
Sent from my SCH-I545 using Tapatalk
tech_head said:
Yea, but the root is an installer from China......
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
No, using that method to retain root through the OTA does not use Vroot. I used that method successfully and am on mj7 and have root.
No Chinese stuff
Verizon Galaxy S4
# MJ7 #
ALL Knoxed Up!
Mistertac said:
No, using that method to retain root through the OTA does not use Vroot. I used that method successfully and am on mj7 and have root.
No Chinese stuff
Verizon Galaxy S4
# MJ7 #
ALL Knoxed Up!
Click to expand...
Click to collapse
You can keep root through the upgrade.
What happens if you need to flash your device??????
THen you need vRoot.
I'm just saying, I won't move to a new OTA unless there is a reliable root method.
With my luck something goes south and I need to re-root after a flash.
tech_head said:
You can keep root through the upgrade.
What happens if you need to flash your device??????
THen you need vRoot.
I'm just saying, I won't move to a new OTA unless there is a reliable root method.
With my luck something goes south and I need to re-root after a flash.
Click to expand...
Click to collapse
Yes if you were on one of the previous basebands you could take the mj7 OTA and keep root. Like shown here : http://forum.xda-developers.com/showthread.php?t=2504408
And yea.. As soon as you're on mj7 you're stuck there, no going back. If you had to flash mj7 for some reason after all that, then you would be left with the choice of using those Chinese root methods. But that guide that was already mentioned above by another poster worked prefect for me.
Verizon Galaxy S4
# MJ7 #
ALL Knoxed Up!
[EDITED BASED OFF FEEDBACK]
Its hard to gather what order and what defines each build for the Verizon Galaxy S4 without a lot of reading. So here is my understanding! Please correct and or add onto this!!!
MDK - Original Build, can replace recovery, rootable
ME7 - 2nd build, cannot replace recovery, rootable, SafeStrap support
MI1 - 3rd build, cannot replace recovery, rootable, Safestrap support (you can install any ME7, or MI1 roms)
MJ7 - 4th build, cannot replace recovery, rootable, Safestrap is not supported
MK? -
ktamlyn said:
Its hard to gather what order and what defines each build for the Verizon Galaxy S4 without a lot of reading. So here is my understanding! Please correct and or add onto this!!!
MDK - Original Build, can replace recovery, rootable
ME7 - 2nd build, cannot replace recovery, rootable, extensive SafeStrap support
MI1 - 3rd build, cannot replace recovery, rootable, limited Safestrap support due to limited ROM selection* (HyperDrive only?)
MJ7 - 4th build, cannot replace recovery, rootable, Safestrap is not supported
Is it true that you cannot run ME7 Roms on a MI1 device using Safestrap?
Click to expand...
Click to collapse
No, You can run any ROM on MI1 that suports Safestrap on ME7 & is based on TouchWiz. You would just flash the MI1 kernel modules after you finish installing the ROM.
The only difference between ME7 and MI1 really is that screen rotation is broken on MI1 if you run a custom rom. Also MK2 is the newest build now.
Sent from my SCH-I545 using XDA Premium 4 mobile app
Thanks this helped me greatly. Going to Odin back to MDK after reading this.
What are you on right now? You can't downgrade firmware.
Sent from my SCH-I545 using XDA Premium 4 mobile app
joshm.1219 said:
What are you on right now? You can't downgrade firmware.
Sent from my SCH-I545 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I just got a phone sent back from warranty and it's currently running on the MI1 firmware you can still used xposed framework and stuff if i were to root it right? Would you advise rooting now, or at what stage of firmware?
If you're in MI1 I wouldn't upgrade, it's the last build that you can still run safestrap on.
Sent from my SCH-I545 using XDA Premium 4 mobile app
joshm.1219 said:
If you're in MI1 I wouldn't upgrade, it's the last build that you can still run safestrap on.
Sent from my SCH-I545 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
So i can follow the MI1 root instructions and install safestrap , but will this void my warranty? i heard something about how something like a code change triggers a signal on their servers or something,to void warranty but is that with Knox?
Rooting your phone is technically voiding warranty, although there are ways to get back to complete stock. No servers are triggered and the rooting instructions will have you getrid of knox.
Sent from my SCH-I545 using XDA Premium 4 mobile app
joshm.1219 said:
Rooting your phone is technically voiding warranty, although there are ways to get back to complete stock. No servers are triggered and the rooting instructions will have you getrid of knox.
Sent from my SCH-I545 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
yeah, but there are "unroot" methods right? if i did that and had to use a warranty would they recognize it if i went back to stock recovery and unrooted? i've done a bit of research, only a little fuzzy now, jus cuz I started my saturday night a little early :victory: :good:
I'm not sure if this is the right place for this or not but I came across this method through Google. It worked for my Verizon Note 2 with the OTA 4.3 update. I also used Foxfi until the update. With Titanium Backup, I froze the KNOX security and Foxfi works again without asking to contact VZW. Thanks to the Devs who are responsible for this method. I hope it is ok that I shared the link.
http://forum.xda-developers.com/showthread.php?t=2565758
Works
loonz29 said:
I'm not sure if this is the right place for this or not but I came across this method through Google. It worked for my Verizon Note 2 with the OTA 4.3 update. I also used Foxfi until the update. With Titanium Backup, I froze the KNOX security and Foxfi works again without asking to contact VZW. Thanks to the Devs who are responsible for this method. I hope it is ok that I shared the link.
http://forum.xda-developers.com/showthread.php?t=2565758
Click to expand...
Click to collapse
I had my phone unrooted and on 4.3, ran the install.bat and it's rooted!
I can confirm as well. Thank you!
Sent from my SCH-I605 using XDA Premium 4 mobile app
Unlocked too?..I heard root is possible, but bootloader unlock is not.
Sent from my SCH-I605 using Tapatalk
Don't know about unlocking the bootloader. I haven't found anything for that yet.
Sent from my SCH-I605 using xda premium
This method also worked for me, however I had to restore back to stock 4.3 with odin first.
Thanks!
Congrats! You successfully perma locked your bootloader by taking the 4.3 OTA.
droidstyle said:
Congrats! You successfully perma locked your bootloader by taking the 4.3 OTA.
Click to expand...
Click to collapse
For those of us who don't care about the bootloader, your statement is moot.
vortmax said:
For those of us who don't care about the bootloader, your statement is moot.
Click to expand...
Click to collapse
This is the case for me. I just needed root for Titanium backup primarily.
At least people will know there is a way to root it. Hopefully one of the devs will figure out how to unlock the new boot loader.
Sent from my SCH-I605 using xda app-developers app
Do I need to downgrade verizon note 2 to 4.1.1 for carrir unlock?
b1ackplague said:
I had my phone unrooted and on 4.3, ran the install.bat and it's rooted!
Click to expand...
Click to collapse
Do I need to downgrade verizon note 2 to 4.1.1 for carrier unlock?
Also I have a metro pcs samsung s4 that I need to carrier unlock do u have any idea's?
wirelessjunkies said:
Do I need to downgrade verizon note 2 to 4.1.1 for carrier unlock?
Also I have a metro pcs samsung s4 that I need to carrier unlock do u have any idea's?
Click to expand...
Click to collapse
I don't think that downgrading is possible without tripping the KNOX security counter. As far as the s4, this root version should root the phone, and I believe that I have read somewhere about a safestrap app thst allows you to flash roms and such.
Sent from my SCH-I605 using xda premium
I have had no success with this method as yet. I run the script, and it seems to run fine, then after it's rebooted, when it says to run SuperSU, and let it update if it asks, the update always fails. Has anyone else experienced this problem? Found a way around it?
wirelessjunkies said:
Do I need to downgrade verizon note 2 to 4.1.1 for carrier unlock?
Also I have a metro pcs samsung s4 that I need to carrier unlock do u have any idea's?
Click to expand...
Click to collapse
This phone is global unlocked hence you don't need to downgrade to 4.1.1....let me know the purpose so that v can suggest
Sent from my SCH-I605 using XDA Premium 4 mobile app
Awesomesauce!!
Just got it to work. thanks !!
Darmelc said:
Just got it to work. thanks !!
Click to expand...
Click to collapse
Did you have to downgrade it to make it work?
Sent from my SCH-I605 using Tapatalk
cpomike13 said:
Did you have to downgrade it to make it work?
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
I did not have to downgrade to make it work.
Sonofabitch it worked...I bought my Note 2 cash, JUST after it had received the 4.3 update (sigh) I understand about the no bootloader thing, but being able to use Titanium Backup again is awesome
I use the cf autoroot. it worked like charm.
Now, this means the bootloader is unlocked right?
should i upgrade my firmware to the newest? from NCD to NCH, or should i just wait. advice?
gibrannz said:
I use the cf autoroot. it worked like charm.
Now, this means the bootloader is unlocked right?
should i upgrade my firmware to the newest? from NCD to NCH, or should i just wait. advice?
Click to expand...
Click to collapse
You can upgrade to NCH - Chainfire used that firware to provide the root for our device, so you should be able to root again IF you do lose root.
idtheftvictim said:
You can upgrade to NCH - Chainfire used that firware to provide the root for our device, so you should be able to root again IF you do lose root.
Click to expand...
Click to collapse
thank you. i already downloaded the NCH firmware from kies. now im just waiting to see if anybody gives me a good reason not to do it proceed, lol.
loving this new phone.
Wait!
Chainfire works for this?
I thought it wouldn't because the bootloader was locked.
I assume that this triggers Knox right?
I really don't care, but would be nice to know.
And with root I can tether for free again then.
Sent from my SM-G900T using XDA Premium 4 mobile app
---------- Post added at 12:58 PM ---------- Previous post was at 12:57 PM ----------
Mine has nch out of the box.
Hopefully that won't cause problems.
Sent from my SM-G900T using XDA Premium 4 mobile app
TheArtiszan said:
Wait!
Chainfire works for this?
I thought it wouldn't because the bootloader was locked.
I assume that this triggers Knox right?
I really don't care, but would be nice to know.
And with root I can tether for free again then.
Sent from my SM-G900T using XDA Premium 4 mobile app
---------- Post added at 12:58 PM ---------- Previous post was at 12:57 PM ----------
Mine has nch out of the box.
Hopefully that won't cause problems.
Sent from my SM-G900T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes, Chainfire released a root for the T-Mobile S5 - Chainfire Auto Root
Some people have already reported that it worked, so that means our bootloader is NOT locked...now I can get the phone without worries!
And Yes - This will trip Knox
The root is Based on NCH, so it will work on your phone.
TheArtiszan said:
Wait!
Chainfire works for this?
I thought it wouldn't because the bootloader was locked.
I assume that this triggers Knox right?
I really don't care, but would be nice to know.
And with root I can tether for free again then.
Sent from my SM-G900T using XDA Premium 4 mobile app
---------- Post added at 12:58 PM ---------- Previous post was at 12:57 PM ----------
Mine has nch out of the box.
Hopefully that won't cause problems.
Sent from my SM-G900T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes, it worked for my. I was kind of worried because I didn't want to brick my phone, but I am now rooted and everything is just fine.
It does trigger knox
Sent from my SM-G900T using XDA Premium 4 mobile app
This is the download mode screen I got after rooting. I don't really care about knox or warranty
Sent from my SM-G900T using XDA Premium 4 mobile app
idtheftvictim said:
Some people have already reported that it worked, so that means our bootloader is NOT locked...now I can get the phone without worries!
And Yes - This will trip Knox
The root is Based on NCH, so it will work on your phone.
Click to expand...
Click to collapse
Nope its locked. Root is obtainable but roms is is a whole different story. Be on the look out for a safestrap method tho
Sent from my SAMSUNG-SM-G900A using Tapatalk
YoungAceAtlanta said:
Nope its locked. Root is obtainable but roms is is a whole different story. Be on the look out for a safestrap method tho
Sent from my SAMSUNG-SM-G900A using Tapatalk
Click to expand...
Click to collapse
According to Chainfire, if we were able to root using CF-Auto-root, then the bootloader is NOT locked. How do you figure it is locked if this method of root worked?
idtheftvictim said:
According to Chainfire, if we were able to root using CF-Auto-root, then the bootloader is NOT locked. How do you figure it is locked if this method of root worked?
Click to expand...
Click to collapse
the bootloader is unlocked after the cf-auto-root
This proves T-Mobile S5 is dev-friendly.
Root away if you don't care Knox.
Does tripping Knox meaning JUMP warranty is Void?
savoritz said:
you can still root using cf-auto-root, anything past i.e. custom roms/kernels custom boot logos and your sol. wait for safestrap method imo
Click to expand...
Click to collapse
What compels you to post when you have no clue what you are talking about. To use cfautoroot method to root a phone it must have a unlocked bootloader. Other root methods is different but for cf it is a must...but thanks for your useless definitive know nothing Sol post
How to create a system dump:
adb shell
su
dd if=/dev/block/mmcblk0p23 of=/storage/extSdCard/system.img
Click to expand...
Click to collapse
YoungAceAtlanta said:
Nope its locked. Root is obtainable but roms is is a whole different story. Be on the look out for a safestrap method tho
Sent from my SAMSUNG-SM-G900A using Tapatalk
Click to expand...
Click to collapse
PLEASE do not make statements like this that will only confuse everyone trying to find ways to root and get recovery on their phone. You are completely mistaken. Chainfire himself said that if CF AUTO ROOT Can be flashed then the bootloader IS UNLOCKED - and trust me, he knows much more about this than you or I do)
PLUS - RECOVERY is now possible by flashing Phils Custom CWM - (from the International Thread) There is a file posted that specifically for our phone - it works beautifully on the TMO S5 - you can download it here: http://goo.im/devs/philz_touch/CWM_A...d_Edition/klte It is a Unified version for TMO - SPRINT and VERIZON (Dev Edition) S5's. (SPecial thanks to Phil3759 and Chainfire for his CF AUto ROot)
Looks as if I was wrong. Apparently the bootloader is unlocked.
Sent from my SAMSUNG-SM-G900A using Tapatalk
caodangra said:
Does tripping Knox meaning JUMP warranty is Void?
Click to expand...
Click to collapse
I talked to a T-Mobile employee and he said they only check that the serial matches, that it turns on, and that it doesn't have water damage or a cracked screen. So pretty much tripping Knox means nothing in terms of the JUMP plan
JUMPing to the S5 tomorrow, can't wait!
YoungAceAtlanta said:
Nope its locked. Root is obtainable but roms is is a whole different story. Be on the look out for a safestrap method tho
Sent from my SAMSUNG-SM-G900A using Tapatalk
Click to expand...
Click to collapse
Be careful for what you said.
The situation is exactly same as Note 3 (only Sprint and T-Mobile versions have unlocked bootloader).
CF Auto root requires unlocked bootloader. That's why you never seen CF for ATT and VZW (except dev version) versions.
The procedure is to flash "customized" recovery in order to install SU, so unlocked bootloader is required.
YoungAceAtlanta said:
Looks as if I was wrong. Apparently the bootloader is unlocked.
Sent from my SAMSUNG-SM-G900A using Tapatalk
Click to expand...
Click to collapse
Welcome to the party. Most of us have already used CFautoroot.
Sent from my toaster
jwcurry83 said:
I talked to a T-Mobile employee and he said they only check that the serial matches, that it turns on, and that it doesn't have water damage or a cracked screen. So pretty much tripping Knox means nothing in terms of the JUMP plan
JUMPing to the S5 tomorrow, can't wait!
Click to expand...
Click to collapse
Glad to hear, thank you. Now I feel as ease to root. :good: