Thanks to our friends in Indonesia, we have the updated 2.2.2 Rom --> odienas and tri_zet
This update has been confirmed to work with:
S7-103, Indonesian version with dual cameras internal/external sdcard
S7-104, US BestBuy/RadioShack version with dual cameras and internal/external sdcard
S7-105, Australian version with dual cameras and external sdcard
Partially working:
S7-101, Austria Mobilkom version - loses camera, GPS?
S7-103, New Zealand - loses GPS?
More Info go ---> http://www.androidtablets.net/forum...d-2-2-2-dual-camera-s7-s7v100r001c98b021.html
Download
http://www.megaupload.com/?d=PVWGU020
http://www.mediafire.com/?9l52jhbl7b09czp
MD5 checksum for updata.app : 74D031FD717D8BF68956EF3F044C8EEB
Update install process:
1. unrar the file, and copy the 'dload' folder to the root directory of a sufficiently large external SDcard formatted to FAT/FAT32 (readable by the S7)
2. turn off the unit, and ensure that you are either plugged in with a battery inside the unit, or that you have enough charge left in your battery
3. turn on, and a progress bar will appear in the middle of the screen. Wait until "OK" is displayed on the screen.
4. turn off the unit by removing the battery and any powerplugs to the S7
5. repeat steps 2,3,4 again. otherwise it will hang at boot screen (instructed by Huawei)
6. Remove the SD card and start the device. If you wish the use the card for the device, remove the firmware files from the SD card before reinserting it.
If the update fails to install, check that your file was properly moved into the SDcard by comparing the MD5 checksum.
The overall process should take less than 15 minutes to complete.
Adobe Flash is not pre install ---> http://www.mediafire.com/?io9d5tkt6mu0k74
To ROOT use SOC ---> http://www.androidtablets.net/forum...ot-official-huawei-s7-android-2-2-builds.html
Thanks!! good job
what's new?
Any idea if this will work with the Telstra T-Touch Tab (Australia)? I'm told on other threads it's identical to the Ideos S7 except without any memorycard soldered onto the board. - and it seems possibly this only has agps too.
What is the latest available offical firmware? Im using S7 bought from Orange PL and mine ver is S7v100R001C98B022-is this the newest one?
Which do you think is the best out of your own experience?
aurionix said:
Any idea if this will work with the Telstra T-Touch Tab (Australia)? I'm told on other threads it's identical to the Ideos S7 except without any memorycard soldered onto the board. - and it seems possibly this only has agps too.
Click to expand...
Click to collapse
It runs just fine on the T Touch mate
hi, Everyone knows if this rom works with the s7-106?
I'd bought this WE a little box from Engel Axil with Android 2.3.
This box is powered by an ARM CORTEX (armv7) processor with 512Mo of RAM and 2Go stockage.
More info HERE.
I'd installed openssh and I can see the return of 'uname -a':
Code:
Linux localhost 2.6.34 V1.3.0-70-gee2481e(20120217.100957) armv7l GNU/Linux
A spanish community seem to have succeed to make a ICS release for it HERE, but they don't say anything about the procedure to install this.
Is there somebody here which will be able to explain me how to upgrade my Engeldroid ?
With 'busybox installer' and ssh terminal, I am able to get root access.
Now I try to set the default home launcher to something else than original spanish launcher....
I'm interested in this too!
The EngelDroid 1007M looks just like what I need, but I don't like that its software is in spanish.
maisondouf said:
Is there somebody here which will be able to explain me how to upgrade my Engeldroid ?
Click to expand...
Click to collapse
Hello Guys,
I'm living in Spain myself and bought me one of these nifty boxes as well and started to fizzle around with it.
Here are my findings with it so far:
Android:
The box comes standard with Android 2.4.3 (or was it 2.3.4, I'm at work right now and can't remember correctly ) but can be upgraded to a 4.0.3 version that is made by Mygica.es.
The link to download the upgrade is indeed the link you've posted.
To install this upgrade you will need to download the zipfile, rename it to update.img and copy it to a clean SD Card.
Make sure that the Engeldroid is powered off and put the SD Card in the Engeldroid.
Than take something pointy and press and hold the reset button on the back (the smal little hole) and plug in the power connection to boot the Engeldroid in update mode. You can release the reset button when you see the restore-android-logo appearing on the screen.
The droid will now look for the update.img on the SD Card and start updating your box. There will be a random offset message but that is nothing to worry about and does not give any problems with the installation.
The first time after installing this new Android version the unit will take up to 15 minutes to boot it due to installing all settings and default apps from this custom rom.
The normal remote control with the keyboard on the back won't work anymore, but the motion controller will. It is highly advisable to connect a wireless keyboard and/or mouse or combination. Myself, I'm using a Logitech K400 keyboard/touchpad combination which works flawless.
Another option for the Media Center tweakers would be to install Linux with XBMC on this.
It is nowhere comfirmed but that is how I am using my Engeldroid at the moment and it turned my droid box into a proper XBMC media center and Samba file server that shares all my movies from the connected disc on the network as well.
The install procedure is the almost the same as with the other ROMS, download, unpack the zipfile, make sure the file is called update.img, copy to the root of the SD Card, plug it in and reset the droid with the reset button hold.
The link for the specific build of XBMC Linux that is working with our droid I can't post here yet, but search on google for: Pivos XBMC-Linux Beta 100912 and you will find the Pivos forums with the release topic of this ROM.
Don't try the Android ROM from Pivos, it is not compatible with the Engeldroid EN1007M. No worries if you want to try it, it won't blow up our box but just won't install.
If you have any more specific questions, please ask or send me a message or email and I will get in touch with you.
Official update
There is an official update for this device to ICS 4 (site in spanish though)
engeldroid . com
Got to "Nueva ROM Android 4 ICS" --> "ROM Android 4 ICS" (I'd link it but I don't have 10 posts yet )
I bought a Mediapad X1 from China via AliExpress.
I cannot make anything from a limited Chinese ROM.
Anybody who has international ROM or can extract it from the international version, please help!
satawat.thongsawat said:
I bought a Mediapad X1 from China via AliExpress.
I cannot make anything from a limited Chinese ROM.
Anybody who has international ROM or can extract it from the international version, please help!
Click to expand...
Click to collapse
The international version hasn't been released yet... I bought mine (4G version) through Lenteen from Hong-Kong, and everythings works fine ! I installed google apps, rooted my phone
I know that Huawei was supposed to release it at the end of may in France but any news nowhere on the web... none even from Huawei themself !
So we just have to wait and see...
gregou said:
The international version hasn't been released yet... I bought mine (4G version) through Lenteen from Hong-Kong, and everythings works fine ! I installed google apps, rooted my phone
I know that Huawei was supposed to release it at the end of may in France but any news nowhere on the web... none even from Huawei themself !
So we just have to wait and see...
Click to expand...
Click to collapse
Does it sync your Google contacts correctly? If so, what did you need to do to get that working?
gregou said:
The international version hasn't been released yet... I bought mine (4G version) through Lenteen from Hong-Kong, and everythings works fine ! I installed google apps, rooted my phone
I know that Huawei was supposed to release it at the end of may in France but any news nowhere on the web... none even from Huawei themself !
So we just have to wait and see...
Click to expand...
Click to collapse
Thank you for the reply, some questions:
1. So, yours is also a Chinese version?
2. Please post the link for rooting.
3. After rooting, install the GApp, version for 4.2.2? And then we can go for anything, like Nova launcher?
satawat.thongsawat said:
Thank you for the reply, some questions:
1. So, yours is also a Chinese version?
2. Please post the link for rooting.
3. After rooting, install the GApp, version for 4.2.2? And then we can go for anything, like Nova launcher?
Click to expand...
Click to collapse
So yes it's also a chinese version, but it's the 4G chinese version.
TUTO FOR ROOTING :
Here is the procedure for your rooter Huawei Mediapad X1/Honor X1:
Here's what you need:
MediaPad Huawei X1
A micro USB to USB cable
PC
Root Genius software at the following address : http://www.shuame.com/en/root/
Now to root your device : (This method works with B002 Chinese version, not tested on others number firmwares)
1 - Enable developer mode on Huawei MediaPad X1 in Settings> About phone
Press several times on the box " build number " until a message announcing the activation of developer mode
Connect your Huawei MediaPad X1.
2 - In the notification bar choose the Hi Suite mode and let the PC detected the device
3 - Start the Root Genius you previously downloaded, it will automatically detect your device, it only remains for you to click on the ROOT button and wait
4 - If all went well , you should have a message of congratulations . In addition, a new application called King User will be installed on your device.
Now you can use apps that require root such as Titanium Backup , Root Explorer, etc. . You 'll also be able to uninstall applications or games you do not want and which are pre-installed on the device.
If you have any questions do not hesitate!
P.S : If anything goes wrong that's your entire responsability !
---------- Post added at 05:22 AM ---------- Previous post was at 05:15 AM ----------
TUTO TO GET ALL GAPPS (INCLUDED CONTACTS SYNC)
As you know , the Chinese version of the Huawei Mediapad do not get Google applications .
*
Here is the procedure to have them all , including the synchronization of contacts !
*
*What you need:
Huawei Mediapad Honor X1 (chinese version) Your phone must be already rooted ! ( follow the tutorial i posted earlier)
A file explorer that supports the administration ROOT rights (root explorer, es file explorer , etc. . ) Available on Google Play Store
There is nothing very complicated , just follow the tutorial :
Open your file explorer supporting the rights adminstration ROOT
Go to the following folder
/ cust / channel / charm_china_u / xml /
You will find the file UNSTALL_APK.XML
Rename it to : UNSTALL_APK.XML.OLD
This is done !
Restarting the Huawei Honor Mediapad/Honor X1 , applications will be automatically downloaded and installed on the phone and you will have access to all Google services including synchronization of contacts !
*
WARNING: by doing this manipulation, future updates will no longer be compatible with the device and you will have to rename the file UNSTALL_APK.XML.OLD to UNSTALL_APK.XML to update the device. Otherwise, you can make a copy of the original file that you can keep safe somewhere on your phone or computeur.
If anything goes wrong that's your entire responsability !
http://consumer.huawei.com/cn/mobile-phones/support/downloads/honour-x1-cn.htm
vyming said:
http://consumer.huawei.com/cn/mobile-phones/support/downloads/honour-x1-cn.htm
Click to expand...
Click to collapse
This is a Chinese ROM?
gregou said:
So yes it's also a chinese version, but it's the 4G chinese version.
TUTO FOR ROOTING :
Here is the procedure for your rooter Huawei Mediapad X1/Honor X1:
Here's what you need:
MediaPad Huawei X1
A micro USB to USB cable
PC
Root Genius software at the following address : http://www.shuame.com/en/root/
Now to root your device : (This method works with B002 Chinese version, not tested on others number firmwares)
1 - Enable developer mode on Huawei MediaPad X1 in Settings> About phone
Press several times on the box " build number " until a message announcing the activation of developer mode
Connect your Huawei MediaPad X1.
2 - In the notification bar choose the Hi Suite mode and let the PC detected the device
3 - Start the Root Genius you previously downloaded, it will automatically detect your device, it only remains for you to click on the ROOT button and wait
4 - If all went well , you should have a message of congratulations . In addition, a new application called King User will be installed on your device.
Now you can use apps that require root such as Titanium Backup , Root Explorer, etc. . You 'll also be able to uninstall applications or games you do not want and which are pre-installed on the device.
If you have any questions do not hesitate!
P.S : If anything goes wrong that's your entire responsability !
---------- Post added at 05:22 AM ---------- Previous post was at 05:15 AM ----------
TUTO TO GET ALL GAPPS (INCLUDED CONTACTS SYNC)
As you know , the Chinese version of the Huawei Mediapad do not get Google applications .
*
Here is the procedure to have them all , including the synchronization of contacts !
*
*What you need:
Huawei Mediapad Honor X1 (chinese version) Your phone must be already rooted ! ( follow the tutorial i posted earlier)
A file explorer that supports the administration ROOT rights (root explorer, es file explorer , etc. . ) Available on Google Play Store
There is nothing very complicated , just follow the tutorial :
Open your file explorer supporting the rights adminstration ROOT
Go to the following folder
/ cust / channel / charm_china_u / xml /
You will find the file UNSTALL_APK.XML
Rename it to : UNSTALL_APK.XML.OLD
This is done !
Restarting the Huawei Honor Mediapad/Honor X1 , applications will be automatically downloaded and installed on the phone and you will have access to all Google services including synchronization of contacts !
*
WARNING: by doing this manipulation, future updates will no longer be compatible with the device and you will have to rename the file UNSTALL_APK.XML.OLD to UNSTALL_APK.XML to update the device. Otherwise, you can make a copy of the original file that you can keep safe somewhere on your phone or computeur.
If anything goes wrong that's your entire responsability !
Click to expand...
Click to collapse
@gregou
I cannot get into download mode to install Gapps via odin.
Also cannot find recovery mode???
How to install Gapps,then??
satawat.thongsawat said:
@gregou
I cannot get into download mode to install Gapps via odin.
Also cannot find recovery mode???
How to install Gapps,then??
Click to expand...
Click to collapse
When the phone reboot, after you renamed the file, gapps are automatically installed by the phone.. You don't have to use recovery mode at all !!
And for now, i'm not sure that CWM is available for this model... I think i saw it on a chinese forum but when i translate it's too messy and i have to be registered on this forum to download it so... we have to wait that someone make a post here in english with th e CWM in download...
gregou said:
When the phone reboot, after you renamed the file, gapps are automatically installed by the phone.. You don't have to use recovery mode at all !!
And for now, i'm not sure that CWM is available for this model... I think i saw it on a chinese forum but when i translate it's too messy and i have to be registered on this forum to download it so... we have to wait that someone make a post here in english with th e CWM in download...
Click to expand...
Click to collapse
Okay, I see the point, we just install portions of Google apps we need, starting with play store, the any thing you need.
I do hope we'll have CWM, or at least hardware ways to boot into download and recovery mode.
The KitKat may be far from reality?
satawat.thongsawat said:
Okay, I see the point, we just install portions of Google apps we need, starting with play store, the any thing you need.
I do hope we'll have CWM, or at least hardware ways to boot into download and recovery mode.
The KitKat may be far from reality?
Click to expand...
Click to collapse
We'll get Kikat firmware on this phone for sure, we just have to wait from Huawei to rolling out this version.
It's not portions of google apps as when you do this procedure i explained, ALL the gapps are installed automatically on the phone.
Basically, Huawei made a script in the phone for not allowing these apps to be installed, but when you rename this file, the script is no longer available, then all the gapps are installing after the next reboot !
Mediapad X1 7D-503L
The only deference is the directory:
/ cust / channel / charm_china_l / xml / ( charm_china_l not charm_china_u)
and i use the command as su
mount -o rw,remount -t rootfs /cust
because when It try to rename the UNSTALL_APK.XML I take the error "Read-only file system"
thanks
X1 undetectable by the PC
I have GApps Syncing quite fine without rooting, except the contacts sync which is missing from the sync list. I see your steps are very straight forward, but unfortunately my X1 is not recognized by the PC, although I've installed HiSuite from Huawei website. I've also tried to install Huawei device driver for X1 from this site, but still unrecognized. Accordingly GeniusRoot is unable to detect and root my X1.
I'm Win 8.1 (both 32 and 64 bits), and I've tried to do all these procedures with Compatibility model for Win7, run as administrator, yet the X1 is till not detected by the PC.
Also USB Debugging is enabled in Developer Options.
Any idea what's the reason for this?
More info about my version:
Baseband: 21.529.00.00.000
Kernel: 3.0.8-01317-gcd83a45 [email protected] #1
Build Number: 7D-501uV100R001C233B013
gregou said:
So yes it's also a chinese version, but it's the 4G chinese version.
TUTO FOR ROOTING :
Here is the procedure for your rooter Huawei Mediapad X1/Honor X1:
Here's what you need:
MediaPad Huawei X1
A micro USB to USB cable
PC
Root Genius software at the following address :
Now to root your device : (This method works with B002 Chinese version, not tested on others number firmwares)
1 - Enable developer mode on Huawei MediaPad X1 in Settings> About phone
Press several times on the box " build number " until a message announcing the activation of developer mode
Connect your Huawei MediaPad X1.
2 - In the notification bar choose the Hi Suite mode and let the PC detected the device
3 - Start the Root Genius you previously downloaded, it will automatically detect your device, it only remains for you to click on the ROOT button and wait
4 - If all went well , you should have a message of congratulations . In addition, a new application called King User will be installed on your device.
Now you can use apps that require root such as Titanium Backup , Root Explorer, etc. . You 'll also be able to uninstall applications or games you do not want and which are pre-installed on the device.
If you have any questions do not hesitate!
P.S : If anything goes wrong that's your entire responsability !
---------- Post added at 05:22 AM ---------- Previous post was at 05:15 AM ----------
TUTO TO GET ALL GAPPS (INCLUDED CONTACTS SYNC)
As you know , the Chinese version of the Huawei Mediapad do not get Google applications .
*
Here is the procedure to have them all , including the synchronization of contacts !
*
*What you need:
Huawei Mediapad Honor X1 (chinese version) Your phone must be already rooted ! ( follow the tutorial i posted earlier)
A file explorer that supports the administration ROOT rights (root explorer, es file explorer , etc. . ) Available on Google Play Store
There is nothing very complicated , just follow the tutorial :
Open your file explorer supporting the rights adminstration ROOT
Go to the following folder
/ cust / channel / charm_china_u / xml /
You will find the file UNSTALL_APK.XML
Rename it to : UNSTALL_APK.XML.OLD
This is done !
Restarting the Huawei Honor Mediapad/Honor X1 , applications will be automatically downloaded and installed on the phone and you will have access to all Google services including synchronization of contacts !
*
WARNING: by doing this manipulation, future updates will no longer be compatible with the device and you will have to rename the file UNSTALL_APK.XML.OLD to UNSTALL_APK.XML to update the device. Otherwise, you can make a copy of the original file that you can keep safe somewhere on your phone or computeur.
If anything goes wrong that's your entire responsability !
Click to expand...
Click to collapse
Thanks for the awesome tutorial bro
I've managed to root the phone, installed es files explorer. Double checked with root checker and confirmed root
But I'm stuck with renaming the file...
And the folder have a slightly different name but that is the only folder I've got..
/cust/channel/charm_china_l/xml/ (yours is china_u)
So, everytime I rename the file it keeps on giving error task failed. I've checked in properties and it says readable:yes writable:yes
I can't delete the file as well the error says unstall_apk.xml cannot be deleted
can u help please
thanks in advance :good:
sordanny said:
Thanks for the awesome tutorial bro
I've managed to root the phone, installed es files explorer. Double checked with root checker and confirmed root
But I'm stuck with renaming the file...
And the folder have a slightly different name but that is the only folder I've got..
/cust/channel/charm_china_l/xml/ (yours is china_u)
So, everytime I rename the file it keeps on giving error task failed. I've checked in properties and it says readable:yes writable:yes
I can't delete the file as well the error says unstall_apk.xml cannot be deleted
can u help please
thanks in advance :good:
Click to expand...
Click to collapse
OK I managed to figure out the solution
Used Root File Manager to rename and voila!! Renamed the file, restart device and got all the Google stuff setup on the phone
Now there is this second problem which is a big pain in the arse
I can't add a second Google account on the phone to get all my contacts..........
Under settings -> accounts -> add account -- there is no option to select "Google" !!!!
Have anyone also face this problem and is there any solution??
Thanks in advance for the help
Guys, you do not need root or tricks to install Google stuff.
Open the Huawei app market. Search for Google. Click on the big Google banner at the top of the page. You get a dedicated page of Google stuff. There you have download links for play store, all the Google apps, and if you can figure out a little Chinese, calendar sync and contact sync software too.
ralphrmartin said:
Guys, you do not need root or tricks to install Google stuff.
Open the Huawei app market. Search for Google. You get a dedicated page of Google stuff. There you have download links for play store, all the Google apps, and if you can figure out a little Chinese, calendar sync and contact sync software too.
Click to expand...
Click to collapse
I can confirm this is true. I did a search for "gms" rather than Google - tap on the big link you get at the top of the results page, which takes you to a page of all the Google apps and services, and install everything! (You can always uninstall what you don't need later). No root required, and everything is syncing properly - calendar, contacts, tasks etc. Super easy.
ralphrmartin said:
Guys, you do not need root or tricks to install Google stuff.
Open the Huawei app market. Search for Google. Click on the big Google banner at the top of the page. You get a dedicated page of Google stuff. There you have download links for play store, all the Google apps, and if you can figure out a little Chinese, calendar sync and contact sync software too.
Click to expand...
Click to collapse
This worked for me too. I installed all google apps and everthing syncs except I still cant sync contacts or have more than one google account.
So frustrated
DannyBoy said:
This worked for me too. I installed all google apps and everthing syncs except I still cant sync contacts or have more than one google account.
So frustrated
Click to expand...
Click to collapse
Have you got Google Contacts Sync in your list of downloaded apps?
DannyBoy said:
This worked for me too. I installed all google apps and everthing syncs except I still cant sync contacts or have more than one google account.
So frustrated
Click to expand...
Click to collapse
Danny here's how to fix it, and u don't need root
if u have rooted and edited the unstall_apk.xml, best is download and flash the stock ROM first:
http://consumer.huawei.com/cn/support/downloads/detail/index.htm?id=20241 (click 立即下载 on the right)
u can also ignore it but all preinstalled google apps will become system apps, and if u've deleted some huawei bloatware u might not be able to OTA update latest B006 firmware
All the Google stuff can work perfectly even can add multiple Google accounts. Best thing is, u don't need root. Here's how:
1) Go to app centre - all - brand and look for the one with 谷歌 (sorry I've updated app centre and it might be different if u haven't update)
2) Download 联系人同步服务, 日历同步服务, Google Playstore, Gmail and Google plus. The rest can be downloaded from playstore
3) After install, open either playstore or gmail and sign in
At this stage, Google is already setup properly with contacts sync just it cannot add multiple Google accounts. Workaround:
4) Open Google plus. Settings - add account
And voila. The phone is perfect now
There's also an OTA update for the LTE version which updates your phone firmware to 7D-503LV100R001C233B006
Cool new features includes double tap screen on, some control over notification flash light for messages and background battery optimization :good:
This tread is referring to a S7-721u version in Malaysia with Gr8 bundled pre-installed.
Unfortunately, I lost my Gr8 activation code and unable to login to the device anymore after a factory reset. After some research, I have managed to flash it with the original firmware. Yes, I lost me Gr8 code, so I don't have the access to the daily subscription anymore, but I got my Huawei Mediapad back without unwanted pre-installed apps.
I am sharing this guideline so that it would be easier for people who faced the same issue like me. For people already got your Huawei Mediapad, keep your Gr8 code safe and remember where you keep it.
Prepare an microSD card with any storage size larger than 1GB.
Format microSD card.
Download Huawei official release firmware (S7-721u, Android4.3, C232B008, General).
Unzip downloaded firmware.
Delete file “au_temp.cfg” in dload folder.
Copy dload folder with UPDATA.APP in it.
Paste dload folder in your microSD card.
Power Off Huawei Mediapad. Insert microSD card.
Press Power + volume up + volume down keys together. The phone automatically enters the upgrade mode, and then begin the upgrade. Release the keys.
Once the progress bar reaches 100%, the phone will automatically restart. DONE!
What is new version C232B008 or C264B001? My tablet is on C264B001.
mugy said:
What is new version C232B008 or C264B001? My tablet is on C264B001.
Click to expand...
Click to collapse
No idea. Sorry.
Deleting the au_temp.cfg.
sunnysardine said:
This tread is referring to a S7-721u version in Malaysia with Gr8 bundled pre-installed.
Unfortunately, I lost my Gr8 activation code and unable to login to the device anymore after a factory reset. After some research, I have managed to flash it with the original firmware. Yes, I lost me Gr8 code, so I don't have the access to the daily subscription anymore, but I got my Huawei Mediapad back without unwanted pre-installed apps.
I am sharing this guideline so that it would be easier for people who faced the same issue like me. For people already got your Huawei Mediapad, keep your Gr8 code safe and remember where you keep it.
Prepare an microSD card with any storage size larger than 1GB.
Format microSD card.
Download Huawei official release firmware (S7-721u, Android4.3, C232B008, General).
Unzip downloaded firmware.
Delete file “au_temp.cfg” in dload folder.
Copy dload folder with UPDATA.APP in it.
Paste dload folder in your microSD card.
Power Off Huawei Mediapad. Insert microSD card.
Press Power + volume up + volume down keys together. The phone automatically enters the upgrade mode, and then begin the upgrade. Release the keys.
Once the progress bar reaches 100%, the phone will automatically restart. DONE!
Click to expand...
Click to collapse
How important is it to delete that file. Is that the reason why when i install the update it says "update.app is a invalid package"? Thanks mate.
Hi. I just reinstall the software, but how do I get back my e papers subscriptions?
Is there any costum rom, and i have this tablet locked on one network ,is there a solution to run other network.thanks in advance.
I did all as you said, but now my tablet is completely dead.
Thanks it worked.
Provide the download link for the firmware please?
Thx Sunnysardine, it works for me.
Just to add a bit for my experience.
The process 1 - 8 MUST be followed exactly. I tried putting the update.app w/o the load folder, it did not work
For process 10, it takes a bit of time. the Huawei logo showed up for quite long before it power up to 1st screen. after that, all well. So got to be patient a little bit
Thanks man
I followed ur instructions exactly and it works, nice
If not for this, I would have thrown away my mediapad, it totally not login-able/ unusable without Gr8 code
Thanks again!
it is work for me.. thanks for sharing
Hi there, I found a way to remove GR8 app without installing the update. I found out that due to the device cannot detect the update in my sd card.
1) turn on the Huawei media pad s7-721u, unlock the screen
2) plug in to computer/laptop windows 7,8 or windows 10
3) on the Huawei media pad screen, it will pop up usb setting, select hiSuite usb type option
4) at the andoid setting, please go to about table setting, then enable developer mode by taping 7 times at Build number
5) still at android setting, go to security, make sure your android Screen lock setting is set under Huawei unlock,the go to shortcut setting, need to set to google app and android setting app.
6) install HiSuite to your computer - this is the Huawei official computer device managed software tool
7) install iRoot software to your computer. careful with this installation, it full of bloatware, but don't worry it don't have a virus.
8) run the iRoot and it will root your device. It will restart your Huawei pad multiple times.
9) after it root complete, unlock your device then go to google play ( as your android unlock setting option have the google play as describe in step 5)
10) install System app remover from google play
11) open the app, go to inside the app setting, remove setting Hide core system app
12) go to the main menu of the app remover, under manager, select system app, now you can find gr8 gallery app. Removed that app then restart the device.
13) you will have multiple error in android, just reboot and the error gone. DONE
This is where you can download the firmware
[email protected]@/download/downloadCenter?downloadId=27805&version=51115&siteCode=pk
Wrong Firmware
sunnysardine said:
This tread is referring to a S7-721u version in Malaysia with Gr8 bundled pre-installed.
Unfortunately, I lost my Gr8 activation code and unable to login to the device anymore after a factory reset. After some research, I have managed to flash it with the original firmware. Yes, I lost me Gr8 code, so I don't have the access to the daily subscription anymore, but I got my Huawei Mediapad back without unwanted pre-installed apps.
I am sharing this guideline so that it would be easier for people who faced the same issue like me. For people already got your Huawei Mediapad, keep your Gr8 code safe and remember where you keep it.
Prepare an microSD card with any storage size larger than 1GB.
Format microSD card.
Download Huawei official release firmware (S7-721u, Android4.3, C232B008, General).
Unzip downloaded firmware.
Delete file “au_temp.cfg” in dload folder.
Copy dload folder with UPDATA.APP in it.
Paste dload folder in your microSD card.
Power Off Huawei Mediapad. Insert microSD card.
Press Power + volume up + volume down keys together. The phone automatically enters the upgrade mode, and then begin the upgrade. Release the keys.
Once the progress bar reaches 100%, the phone will automatically restart. DONE!
Click to expand...
Click to collapse
How can I fix the tablet after being flashed with wrong firmware?
It doesn't turn on and in QPST or QFIL it was in download mode.
I have correct firmware and its dump.
Hey guys i just wanna share how i solved my lenovo yoga problem with broken partition after rooting the tablet,i haved troubles with installing apps and use them,tablet its just goes reboot and its continues about 10 or more restarts,so fixed this when i returned to stock i searched here on xda i dont finded any stuff about this and i decided to share
First memory card is required if you dont have it will not work! So get memory card at least 4GB.
INSTRUCTIONS
-----------------------
1.Boot into Android normally.
2.Connect your phone to your PC/Laptop with a USB cable and when asked (or in USB connection settings), please select USB Mass storage mode to mount SD card.
3.Unzip the downloaded archive.
4.Copy "sdfuse" folder from archive to SD card.
Note: Please make sure that your phone has atleast 60% power before attempting or beginning upgrade. Or keep charger connected during the process.
:cyclops: SD card upgrade process:
Long press VOL UP + POWER_KEY to enter the droidboot,
A menu will appear. Select the fourth option, SDUPDATE.
At the bottom of the screen, you can see the progress and status of the update
When you see the message "SDCARD UPDATE SUCCESS!!!", this means you successfully completed the upgrade process
Now, reboot your device and hopefully it should be updated. You will have Jelly Bean 4.3 :highfive:
When it boots go to contacts type on new cotact name this code ####6020# then select your region! You must do this to get new update to KitKat,if you not it will show you that you dont have updates.
Sorry for my BAD english! :silly:
EUROPE VERSION with 3G ! Download Stock ROM for 3G version! /MEGA/ 860Mb:good:
I think for the Wi-Fi version it will be the same way so here is the link for Wi-fi
Download Stock ROM for Wifi version /Yandex/ 805Mb
hey thanks a bunch for that.! I have a B8080F wifi only model, currentlyrooted on 4.42, but it is a Chinese ROM ( build B8080_S102208_140918_PRC_wifi). can I use this?
Currently living in China but will be moving soon so looking for international rom .
yipeeyiho said:
hey thanks a bunch for that.! I have a B8080F wifi only model, currentlyrooted on 4.42, but it is a Chinese ROM ( build B8080_S102208_140918_PRC_wifi). can I use this?
Currently living in China but will be moving soon so looking for international rom .
Click to expand...
Click to collapse
This is for all version i think.
When it boots go to contacts type on new cotact name this code ####6020# then select your region! I think that will do the job when you select your region
Download Stock ROM for 3G version! /MEGA/ 860Mb it is not available ! Where can I download it ?
when I type ####6020#, it says: Attention Error! Do not have easyimage.zip
[email protected] said:
Download Stock ROM for 3G version! /MEGA/ 860Mb it is not available ! Where can I download it ?
Click to expand...
Click to collapse