[Q] Ayuda con el recovery de Mi Galaxy S3 I9300 - Galaxy S III Q&A, Help & Troubleshooting

Hello everyone a month ago I install a rum cyanogenmod m8 from my recovery in Zip install option but yesterday I wanted to try installing slimkat with a clean install wiping everything in internal memory but to go back to the install zip option and try install from sd memory I went out a next mistake
-- Installing: /sdcard/Rom.zip
Finding update package...
Opening update package...
E: Can't open /data/media/0/Rom.zip
(bad)
Installation aborted.
this happened to me after I delete all data from the phone doing a mega wipe with a zip file but my big problem is that after I could no longer install from sd and my only option to revive my phone was installed by the stock version odin but I do not like the stock so I want to install Cyanogenmod SlimKat or 11 M8 but I can not for the problem that gives me the recovery.
it gives me another error is also:
e: error mounting / system!
e: can not open sdcard
someone help me?
PS: try the 3 types of recovery as I know cwm, TWRP, and Philz but three recoverys not allow me to install any zip file
PD2: The sdcard refers to the internal memory and because of this error can not enter or see what interda q in my memory from the recovery but also tried d install an external memory and nothing

Alvarogb91 said:
Hello everyone a month ago I install a rum cyanogenmod m8 from my recovery in Zip install option but yesterday I wanted to try installing slimkat with a clean install wiping everything in internal memory but to go back to the install zip option and try install from sd memory I went out a next mistake
- Installing: / storage/sdcard1/Rom.zip
Finding update package ...
Opening update package ...
E: Can not open / storage/sdcard1/Rom.zip
(bad)
Installation aborted.
this happened to me after I delete all data from the phone doing a mega wipe with a zip file but my big problem is that after I could no longer install from sd and my only option to revive my phone was installed by the stock version odin but I do not like the stock so I want to install Cyanogenmod SlimKat or 11 M8 but I can not for the problem that gives me the recovery.
it gives me another error is also:
e: error mounting / system!
e: can not open sdcard
someone help me?
PS: try the 3 types of recovery as I know cwm, TWRP, and Philz but three recoverys not allow me to install any zip file
PD2: The sdcard refers to the internal memory and because of this error can not enter or see what interda q in my memory from the recovery but also tried d install an external memory and nothing
Click to expand...
Click to collapse
you must update your recovery..
that's the usually mesage when you are not up to date whit your recovery
best regards

necrosauron said:
you must update your recovery..
that's the usually mesage when you are not up to date whit your recovery
best regards
Click to expand...
Click to collapse
I installed the new version of recovery but I have the same problem

Alvarogb91 said:
I installed the new version of recovery but I have the same problem
Click to expand...
Click to collapse
mmm maybe your download was wrong...
try to download again the file...sometime happens
regards

necrosauron said:
mmm maybe your download was wrong...
try to download again the file...sometime happens
regards
Click to expand...
Click to collapse
Thanks the file was the problem, I have download again the file and the install was succesfull.

Alvarogb91 said:
Thanks the file was the problem, I have download again the file and the install was succesfull.
Click to expand...
Click to collapse
ok bro...glad to help you...:laugh:
hit the thanks button for the next time..
regards:good:

Related

unable to reload modaco rom

hi,
i managed to create the gold card, root my htc hero and install modaco's rom but i selected the one with chinese input but it is not the chinese input which i wanted,
i tried to put the modaco rom in my sd card and rename it as update,
then boot into recovery mode, and when i click apply update.zip,
error message pop up then there is the ( bad )
it was able to open and extract then the 3rd line, it stopped,
i tried another sd card, but still get the same error message,
can anyone advise what i should do ?
i tried to wipe but still cannot,
please help
i tried to go to settings, then sd card unmount, and tried to format it, no response,
when i tried to apply update.zip
message show :
install from sdcard
finding update package
opening update package
E:Can't open /sdcard/update.zip (bad)
installation aborted
try re-downloading it, might just be a corrupt zip also avoid multi segment download management if downloading zips.
thanks,
i noticed that the file was only 3mb, i downloaded last night and re-installed it and it works,
sorry for causing inconvenience to all

Nooby question.

I successfully flashed (cm6) for the first time and got everything working correctly but I can't seem to find the Android Market. Now from what I read I need to install the gapps file. I found it downloaded it straight on the phone. Am at the clockworkmod recovery, but.....how do I install it?
install zip from sd card?
Wont that mess up the ROM
sorry im fairly new to all this.
From Clockwork choose - install zip from sdcard, then - choose zip from sdcard, then browse to where you saved the gapps file and select it. It won't mess up your ROM.
911jason said:
From Clockwork choose - install zip from sdcard, then - choose zip from sdcard, then browse to where you saved the gapps file and select it. It won't mess up your ROM.
Click to expand...
Click to collapse
Ok I did it but there was a problem.
it says
--Installing: SD CARD:download/gapps-mdpi-20101020-signed.zip
Finding update package...
Opening update package...
Installing update...
Installing Google Apps...
Installation Complete!
E:Error in /sdcard/download/gapps-mdpi-20101020-signed.zip
(Status 0)
Installation aborted.
and then it froze at that.. /:
EDIT:::::
Disregard, I rebooted and redid the process and it worked out, thanks for the help!
vicmora5 said:
I successfully flashed (cm6) for the first time and got everything working correctly but I can't seem to find the Android Market. Now from what I read I need to install the gapps file. I found it downloaded it straight on the phone. Am at the clockworkmod recovery, but.....how do I install it?
install zip from sd card?
Wont that mess up the ROM
sorry im fairly new to all this.
Click to expand...
Click to collapse
Yes you install the gapps.zip file from Clockworkmod recovery by selecting install zip from sd card. You need to install it from ClockworkMod because all of these Google Apps will be installed in the /apps directory. No this won't mess up the ROM because the structure of the zip file determines what gets written to the various partitions on the phone. The gapps.zip file contains files that will be written to the /apps directory. A ROM zip file will typically have *.img files in it like boot.img as well as files for the /apps directory.
This was a bug in rom manager with gapps. You followed the procedure correctly fyi.
BelacNongaw said:
This was a bug in rom manager with gapps. You followed the procedure correctly fyi.
Click to expand...
Click to collapse
Alright great. Yeah like I said after that weird error message all I did was restart the phone go back into clockwork and install the zip again and there was no error this time around so now I have all the Google Apps. Thanks to everyone for the help.

[Q] Reinstall Package Problem

I installed the update zip to what I THINK is the internal hardrive. I see a folder that says exteranl but not one that says internal hardrive. But when im in recovery system and i click reinstall packages this pops up
E:failed to open /mt/internal_sd/update.zip (such file or directory)
E: signature verification failed
Installation aborted
How can i fix this
Based Moses said:
I installed the update zip to what I THINK is the internal hardrive. I see a folder that says exteranl but not one that says internal hardrive. But when im in recovery system and i click reinstall packages this pops up
E:failed to open /mt/internal_sd/update.zip (such file or directory)
E: signature verification failed
Installation aborted
How can i fix this
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=849028
get the update.zip from there ??
either get rom manager and flash clockwork then go to recovery and reinstall packages twice or get the update.zip from the link above and reinstall packages twice and that'll take you to clockwork recovery
you sound like you have stock froyo - which means you have the 3E stock recovery.
I suggest following my guide (signature - noobs).
EDIT - ha, just realize Kyle already linked to it, thanks man.

A few questions about installing Cyanodenmod on my SGSII

Hey all, I posted this on CM's forums as well but haven't gotten any replies so I figured I'll try this forum as well. I'm a new to mod installations so forgive if some of these questions are redundant/plain stupid. I figure it's better to ask a stupid question though, than to brick my phone.
Anyways, here goes:
So I have installed ClockworkMod (free) and created a recovery.
I copied a stable version of CM into my root folder (update-cm-7.1.0-GalaxyS2-signed.zip)
Now to install it do I go into ROM Manager, and under ROM Management select "Install ROM from SD Card"? Then check off the 3 options and hit ok, and reboot into recovery on the next popup window?
Finally...when the phone reboots into "Android System Recovery"..I see this:
Android system recovery <3e>
Enter: OK Key, Select: VOL UP/DOWN
reboot system now
apply update from sd card
wipe data/factory reset
wipe cache partition
-- Installing package...
Finding update package...
Opening update package...
Verifying update package...
E:failed to verify whole-file signature...
E:signature verification failed...
Installation aborted.
Click to expand...
Click to collapse
So do I go into "apply update from sd card" and select the CM zip file?? And after that I see there's mention of another zip file simply labelled "update.zip"...its also in my root. So I use that AFTER CM.zip right?
And finally...whats up with the errors there while installing the package? Is that ok?
Thanks! And sorry if this is the wrong forum. I didn't spot a specific mod-related forum here.
nubreed000 said:
Hey all, I posted this on CM's forums as well but haven't gotten any replies so I figured I'll try this forum as well. I'm a new to mod installations so forgive if some of these questions are redundant/plain stupid. I figure it's better to ask a stupid question though, than to brick my phone.
Anyways, here goes:
So I have installed ClockworkMod (free) and created a recovery.
I copied a stable version of CM into my root folder (update-cm-7.1.0-GalaxyS2-signed.zip)
Now to install it do I go into ROM Manager, and under ROM Management select "Install ROM from SD Card"? Then check off the 3 options and hit ok, and reboot into recovery on the next popup window?
Finally...when the phone reboots into "Android System Recovery"..I see this:
So do I go into "apply update from sd card" and select the CM zip file?? And after that I see there's mention of another zip file simply labelled "update.zip"...its also in my root. So I use that AFTER CM.zip right?
And finally...whats up with the errors there while installing the package? Is that ok?
Thanks! And sorry if this is the wrong forum. I didn't spot a specific mod-related forum here.
Click to expand...
Click to collapse
Use this link here, i think your problem is you afe flashing with rom manager you should use CWM for a first time install and you need to flash twice back to back to ensure a clean install.

Error in /sdcard (Status 0) Installation aborted

I'm trying to install a mod from the online kitchen but all i get is:
Error in /sdcard/mymod.zip
(Status 0)
Installation aborted
Even if i make an other rom, install an other version of CWM or SU or when I try to install it from the internal sd it gives me the same error.
I also tried to flash a different kernel, but no succes.
Any suggestions?
Flash a new CWM and Root kernel.
jje
you might have a corrupted download, redownload the mod.
tried both, didn't work... I also tried to rebuild the mod but still get the error.
I can flash other other zips through cwm...
keijers said:
tried both, didn't work... I also tried to rebuild the mod but still get the error.
I can flash other other zips through cwm...
Click to expand...
Click to collapse
strong suspect is your zip file containing the mod. did you try toggling signature verification?
Are you trying from Kitchen or from CWM..
Place on int.SD and flash manually from CWM,
if other files are flashed then definetely CWM is preventing you afrom a wrong flashing...
i've tried to change my batteryicons with this guide and that works:
http://forum.xda-developers.com/showthread.php?t=1434061
But i want to do it via the UOT kitchen, because i want the lockscreen mod too.
This is what i did:
I've uploaded framework-res, twframework-res, systemui and applied the battery mod and the lockscreen mod, nothing else. Then I clicked submit to kitchen, downloaded the zip and flashed it to my device throuw cwm, and i got error 0.
Should i try other scripting in UOT?
maybe i'm stupid but can it also be that i'm on stock rom (rooted) ics 4.0.3 xen lp7?
Hey,
If you check their official XDA Thread:
http://forum.xda-developers.com/showthread.php?t=990829
You will notice (In the second post: http://forum.xda-developers.com/showpost.php?p=12049814&postcount=2) that it is only compatible with Froyo/Gingerbread Roms.
You can't use it with ICS mate, and this is probably why you are getting the error while trying to flash it.
and what about this line:
Battery mod for ICS roms (NEW!)
i also tried to do the battery mod only, but still get the error
same problem with u
keijers said:
and what about this line:
Battery mod for ICS roms (NEW!)
i also tried to do the battery mod only, but still get the error
Click to expand...
Click to collapse
Even though this is the case all hints include that this is froyo/gingerbread only
Sent from my GT-I9100 using XDA
have you mounted your /system or /data ... ?
once had same problem, this fixed it
CJCord said:
have you mounted your /system or /data ... ?
once had same problem, this fixed it
Click to expand...
Click to collapse
Thank you CJCORD!. i was the same problem and i unmount the /system and install the su!
I'm having the same issue in JB, zip packages that i perfectly installed on GB can't be installed now because of the Status 0
simply go to Mount and Storage option, through CWM and unmount system and data.
Demsee said:
simply go to Mount and Storage option, through CWM and unmount system and data.
Click to expand...
Click to collapse
I can't unmount data, what can I do?
error in sdcard status 0 insatllation aborted pls solve it
am using viwepad 7 and i saw it can run ics.
i downloaded the rom and while verifying package it show error in sdcard status 0 installation aborted..
pls help me out to install ics on viewpad 7.
pls help me to solve this error...
raerosaine11 said:
am using viwepad 7 and i saw it can run ics.
i downloaded the rom and while verifying package it show error in sdcard status 0 installation aborted..
pls help me out to install ics on viewpad 7.
pls help me to solve this error...
Click to expand...
Click to collapse
Hello I am having the same problem, could you solve yours?
Please let me know how did you do.
Regards

Categories

Resources