SG S2 Plus after Wipe Dalvik Cache Stuck in Upgradng Android - Android Q&A, Help & Troubleshooting

hi all,
I was trying to make a backup in CWM and i recived every time an erorr (erorr while making backup) and i tried to do an ''wipe dalvik cache'', again a n erorr.I gave up and tried to "reboot"system now'' and the phone keep saying ''andorid is upgrading".I tried a wipe data/factory reset and there are only options with "NO" and there is no "YES".Should i try reflashing CWM?What shoul i do?

radulianis said:
hi all,
I was trying to make a backup in CWM and i recived every time an erorr (erorr while making backup) and i tried to do an ''wipe dalvik cache'', again a n erorr.I gave up and tried to "reboot"system now'' and the phone keep saying ''andorid is upgrading".I tried a wipe data/factory reset and there are only options with "NO" and there is no "YES".Should i try reflashing CWM?What shoul i do?
Click to expand...
Click to collapse
Reflash stock firmware using odin. Your system image and CWM messed up duh..
Here your problem. buggy CWM.
Reflash stock rom and flash "bug free" recovery something like TWRP.. :fingers-crossed:

I have found fix for this error, it is mainly due to odex files which are created by lucky patcher so deleting these files using lucky patcher itself will surely remove this error with 50 percent success rate. Here's the fix; open lucky patcher, there in lower left section you can see Toolbox, click that Toolbox then select 4th last option i.e Remove all odex files.Thats it android will reboot on itself and vola no android is upgrading. .
Check out attached image for help.
:good:Hits Thanks If I helped u:good:

Related

[Q] HELP: Omega 9.1 boots into CWM

I'd really appreciate some help guys, I've searched everywhere but can't seem to find answers.
I had Cyanogen Mod 9 rooted on my phone, however, I decided to install Omega instead, I installed it but I can't get on it! Everytime I install zip and reboot, it goes back to CWM Recovery!
The procedure was:
-deleted all files in internal SD
-Reboot into CWM Recovery
-Wipe data,cache,dalvik
-install zip from sd card
and now im stuck
Please help, and apologies if any noob mistakes were made
Cupuffy said:
I'd really appreciate some help guys, I've searched everywhere but can't seem to find answers.
I had Cyanogen Mod 9 rooted on my phone, however, I decided to install Omega instead, I installed it but I can't get on it! Everytime I install zip and reboot, it goes back to CWM Recovery!
The procedure was:
-deleted all files in internal SD
-Reboot into CWM Recovery
-Wipe data,cache,dalvik
-install zip from sd card
and now im stuck
Please help, and apologies if any noob mistakes were made
Click to expand...
Click to collapse
You'll lose all your data but do a factory reset and wipe your system in addition to what you've already done and re flash the rom. FYI always have a nandroid backup around before flashing. It's time consuming but saves you a lot of grief in the long run
Sent from my GT-I9300 using xda app-developers app
demondor said:
You'll lose all your data but do a factory reset and wipe your system in addition to what you've already done and re flash the rom. FYI always have a nandroid backup around before flashing. It's time consuming but saves you a lot of grief in the long run
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
How do I do a factory reset? My phone is on loop and boots up only into CWM Recovery, should i re download stock firmware and odin it into my phone? thank you so much for helping out
I don't have much on my phone so i didnt back up =[ what a mistake
Cupuffy said:
How do I do a factory reset? My phone is on loop and boots up only into CWM Recovery, should i re download stock firmware and odin it into my phone? thank you so much for helping out
I don't have much on my phone so i didnt back up =[ what a mistake
Click to expand...
Click to collapse
Factory reset(wipe) is an option in cwm(3rd from above) wipe and reflash the rom and let it boot,this can take 10min
1st check md5 .. it will show u wether its bad download or nt ... and then do this
go into cwm and to wipe data\factory reset wipe cache wipe dalvik and insll rom ..
omega 10 is up so better try omega 10 as its new rom :
hisee said:
1st check md5 .. it will show u wether its bad download or nt ... and then do this
go into cwm and to wipe data\factory reset wipe cache wipe dalvik and insll rom ..
omega 10 is up so better try omega 10 as its new rom :
Click to expand...
Click to collapse
I don't know how to check md5, but I already did the wipes and resintall several times, it still loops back into Recovery mode everytime
Cupuffy said:
How do I do a factory reset? My phone is on loop and boots up only into CWM Recovery, should i re download stock firmware and odin it into my phone? thank you so much for helping out
I don't have much on my phone so i didnt back up =[ what a mistake
Click to expand...
Click to collapse
Factory reset is on the main Cwm screen. You can wipe system through the 'mounts and storage' option
Sent from my GT-I9300 using xda app-developers app
demondor said:
Factory reset is on the main Cwm screen. You can wipe system through the 'mounts and storage' option
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Thanks, I've tried it just now and its still not working...
As said above, maybe the download is damaged, redownload and flash.. Good luck..
Huupie said:
As said above, maybe the download is damaged, redownload and flash.. Good luck..
Click to expand...
Click to collapse
How would put it into my internal SD if I can't transfer the file because I can only boot into Recovery or Download mode? Do I just Odin it straight in via the PDA option?
If you connect your phone with the PC while in recovery you should be able to use adb commands
Put the rom file into the adb folder than try
Code:
adb devices
now you should see any cryptic combination of letters and numbers in the next row
(if you see a empty row... that wouldn't be nice^^)
then do:
Code:
adb push yourromfile.zip /sdcard/yourromfile.zip
than try flashing again the new file
dont forget to do a full wipe, cache wipe, dalvik wipe, the common procedure^^
PS:
If you don't know about adb, it is installed with the android sdk, but you can download it seperately
place the ADB folder somewhere on you system hd, maybe directly to C:\
the open cmd and type
cd C:\ADB\
now you're able to use the above commands
You can put it on an external sd and flash it from there...
Verstuurd van mijn GT-I9300 met Tapatalk
Thank you, all of you... I will try this tomorrow and tell you guys how it goes!
Thank you so much EVERYONE, It all worked out, seems like the original file was corrupted, now running omega 10 smoothly!!!!!!!

[Q] Problem installing custom rom

Hi Guys
Im having some problems trying to install a custom rom into my new Galaxy SIII I9300.
The rom in question is OmegaRom V35
After roooting and all, yesterday i tryed installing the rom with mobile odin, following all the instructions.
The result was the phone rebooted after the instalation seemed to be ok, but got stuck on the booting animation, and never got out of there.
I Had then to inject cwm with odin desktop, wiped data, cache anda dalvik, and then proceed to install the stock rom with desktop odin. All went well and the phone worked great.
I thought that maybe the problem was with mobile odin pro. So today, i went and proceeded to install Omega V35 via CWM. I again put the file on internal sd card, wiped data, cache and dalvik, and the rom started flashing. It all started good but, with no warning, at the mniddle of the installation, when applications were being installed, the phone went automatically and wuickly back to CWM!
Of course the installation wasnt finished, so i was stuck with cwm on reboot. Again made wipe data, cache and Dalvik, tried again to flash Omega V35, and again, the same problem...
In the end, i had to flash the stock rom again.
I searched the forum, but i cant seem to find the problem for this. I followed all the instructions, and had no error messages besides CWM skiping the format of the card, and some message (that i've seen in videos as normal), when wiping Dalvik!
Any clue to what's happening?
A clue read the instructions for the rom .
<b>Installation:Install CWM Recovery with Odin - Get CWM Recovery here
Boot to CWM Recovery using volume up, power button and home key
Backup your device and make sure to keep a copy of the backup to your pc!
Wipe data / factory reset (Not needed if you already have Omega)
Install Omega
(Wipe cache will be done automatically during installation so you can skip this step
Wipe dalvik cache will be done automatically during installation so you can skip this step)​</b>
JJEgan said:
A clue read the instructions for the rom .
<b>Installation:Install CWM Recovery with Odin - Get CWM Recovery here
Boot to CWM Recovery using volume up, power button and home key
Backup your device and make sure to keep a copy of the backup to your pc!
Wipe data / factory reset (Not needed if you already have Omega)
Install Omega
(Wipe cache will be done automatically during installation so you can skip this step
Wipe dalvik cache will be done automatically during installation so you can skip this step)​</b>
Click to expand...
Click to collapse
Maybe i didn't expressed myself correctly, but today i followed those instructions twice, and, at each of these tries the
same thing happened. When the flashing was running apparently problemless it simply stoped and went to CWM without rebooting.
rebentador said:
Maybe i didn't expressed myself correctly, but today i followed those instructions twice, and, at each of these tries the
same thing happened. When the flashing was running apparently problemless it simply stoped and went to CWM without rebooting.
Click to expand...
Click to collapse
Maybe The File Is Damaged Try To Download Again, Check MD5 Before Flashing
THE.W!ZARD said:
Maybe The File Is Damaged Try To Download Again, Check MD5 Before Flashing
Click to expand...
Click to collapse
I had already checked the md5, and the file is ok...
When you try to flash it through cwm recovery what error do you get while flashing?
Sent from my GT-I9300 using xda premium
Amritttt said:
When you try to flash it through cwm recovery what error do you get while flashing?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
None whatsoever. The flashing process seems to be running ok, It starts, i select default instalation, after i can see the apps being installed and suddenly, it all stops and goes into cwm without any message or warning...

[Q] [SGS3]Stuck at Samgun Logo. All options have been expended, Desperately need help

Okay, So.. As the title says, i have googled for DAYS, Tried every damn thing i could get my hands on..
Now.
So far, im able to get into download mode, and also into recovery mode, I've tried doing a factory reset, and then flashing a stock rom, and i've tried every concevable method of fixing this damned phone, Its driving me crazy, I flash a new rom with odin, phone reboots, (adds to count) and is STILL stuck at that ****ty flashing samsung logo..
I'd really appreciate ANY help i can get, And i AM a noob at this, So i dont FULLY understand EVERY detail of this, But i've read around enough to know a few things.
My SGS3 has been out of commision for longer than i've actually used it.. So.. Yeah, Getting quite desperate!
Please let me know if there are any particular details yyou need!
Hi,
Your problem is EFS.IMG
Please clear it. Use Odin3 for that.
Boot into recovery and wipe data/factory reset, after you've flashed your ROM.
I had your problem some weeks ago,I finally managed to get arround this after I deleted the dalvik cache and flashed stock rom trough odin,and worked like a charm :good:
try this first before thinking of efs errors!
.
exprxp said:
Hi,
Your problem is EFS.IMG
Please clear it. Use Odin3 for that.
Click to expand...
Click to collapse
Please elaborate, How would i do this with odin?
Boot into recovery and wipe data/factory reset, after you've flashed your ROM.
Click to expand...
Click to collapse
Pretty sure that i've done this by accident, But will try again to be 100% sure, Ill get back to you.
I had your problem some weeks ago,I finally managed to get arround this after I deleted the dalvik cache and flashed stock rom trough odin,and worked like a charm
try this first before thinking of efs errors!
Click to expand...
Click to collapse
Again, Please elaborate, How do i go about doing this, I've never seen an option to delete the 'Dalvik cache'
Thank so damn much for the help so far guys, i really appreciate it!
Cam't really help you with the EFS, but:
-bootloops are often fixed by installing rom then wiping data+cache from recovery as others said
-the dalvik cache can be wiped in the recovery, you can find "wipe dalvik cache" under the advanced submenu
loriz said:
Cam't really help you with the EFS, but:
-bootloops are often fixed by installing rom then wiping data+cache from recovery as others said
-the dalvik cache can be wiped in the recovery, you can find "wipe dalvik cache" under the advanced submenu
Click to expand...
Click to collapse
Im in recovery mode right now (Vol UP+ Home + Power)? And i dont see an 'Advanced' menu option;
Options i DO have: reboot system now; apply update from ADB; apply update from external storage; wipe data/factory reset; wipe cache parition;
apply update from cache..
Any ideas?
These options are only available in a custom recovery.
Just try wipe --> flash stock room --> wipe
Bäcker said:
These options are only available in a custom recovery.
Just try wipe --> flash stock room --> wipe
Click to expand...
Click to collapse
i just want to clarify... when you say 'flash STOCK rom' Do you mean i need to get a rom for a SGS3 VAU (Vodafone Asutralia) and flash that (go to odin, put it in PDA, etc)
and if THAT is the case.. Where would i get said rom, Because i've downloaded it from sammy firmware 4 times, each time it finishes the download without a hitch, when i go to extract the zip to get the needed files, it says its corrupted or some such BS..
Go to Sam mobile and download the firmware mate.
You will end up with a tar md5 file you flash using PDA section of Odin.
Good luck!
Sent from my GT-I9305 using xda app-developers app
Kies is by far the easiest and safest way to factory reset. I have had to use it about 3 times in the past 6 months because I have flashed something I shouldn't have. Plus Kies now has a lite mode that is quicker at flashing your phone back to stock firmware.
serbpower said:
Im in recovery mode right now (Vol UP+ Home + Power)? And i dont see an 'Advanced' menu option;
Options i DO have: reboot system now; apply update from ADB; apply update from external storage; wipe data/factory reset; wipe cache parition;
apply update from cache..
Any ideas?
Click to expand...
Click to collapse
Slightly puzzled by you not having an "advanced" menu option. Which CWM version do you have?
Okay guys it seems ive fixxed my s3, after 4 long months lol..
What i did:
Installed Kies, Got my phone into download mode, Let kies to a PROPER wipe of the phone, (Phone, pds, csc) and it just ****ing straight up fixed everything...now i just need to find a thread that shows me how to COMPLETELY backup my ENTIRE phone, Every damn fkn Kb.. And ill be rooting it again lol
Thanks everyone!

Cyanogen bootloop every time

Hey guys,
I have a Samsung GT-I9300 (International).
I rooted my phone in order to get cwm recovery.
I placed the CM10.1.zip and the gapps.zip on my extsdcard.
I access cwm and install both via the menu.
Then I did a factory reset ´cause everywhere is written i have to do it to get past the bootscreen.
But apparently it doesn't work.
I tried every possible way to get it up and running.
reset -> flash -> reset
reset -> flash
flash -> reset
flash...
I searched on Google for hours but nothing helped so far.
Hope you guys can helpme =)
arough
flashing
arough007 said:
Hey guys,
I have a Samsung GT-I9300 (International).
I rooted my phone in order to get cwm recovery.
I placed the CM10.1.zip and the gapps.zip on my extsdcard.
I access cwm and install both via the menu.
Then I did a factory reset ´cause everywhere is written i have to do it to get past the bootscreen.
But apparently it doesn't work.
I tried every possible way to get it up and running.
reset -> flash -> reset
reset -> flash
flash -> reset
flash...
I searched on Google for hours but nothing helped so far.
Hope you guys can helpme =)
arough
Click to expand...
Click to collapse
follow this guide step by step if problem still occurs contact me
1.Flash rom
2.Flash gapps (if isnt included to rom)
3.Wipe data&cache
4.Wipe cache
5.Wipe dalvik cache
6.Reboot (first start may take several minutes so be patient)
(its always possible that rom just isnt booting so try some other rom if this guide doesnt help)
press thanks if i helped
god damn it!
nothing works...
flashing kernel via Odin works 1 out of 10 times...
flashing rom works not at all
the whole day I'm trying to get CM on my phone -.-
I once flashed my kernel and everything worked perfectly, but no it just an enormous ****storm
and on top of it I freakin deleted my backup and now I can't even get back my old system
hell of a day
from where do I start flashing the rom if I do it a second time?
just "overflash" the old one or start from stock?
EDIT:// HOLY KAMOLY!
It justed worked! I just restarted it for the 42624726th time and now it works like a charm =)
I hope if I update it any time soon I don't have to pray to the almighty flying spaghetti-monster again
there shouldnt be any problem updating cyanogenmod just remember latest cyanogenmod is experimental and you should not flash any kernel anyway feel free to ask if your having problems
What recovery are you using?
Details help.

recovery problem etc. ERROR -24 GOOGLE PLAY DOWNLOAD

recently i have rooted my samsung s2 plus gt-I1901p, then installed supersu and rom manager....I wanted to flash custom rom. So first I done recovery clock mode 6.0.4.5 or something not sure than I done a backup and than I download pac man custom rom......and when I try to falsh it with rom manager did not work.....I try it manualy 3-4 times and also did not work... every time was some kind of error and after each time I done reboot system now and everything was normal...only after last boot somehow it could not reboot....it was md5 data error...I try it several times and finaly I did advanced recovery and start from data and aggain error......so I just turn it off and on and my phone was fine....but I did not have some of my app......viber, skype, rom manager....I try it to install rom manager aggain and than I had an errod code -24...what should I do know.
Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
For more questions or to have full access please register an account on XDA forum.
Stand by
Good luck
XDA Visitor said:
recently i have rooted my samsung s2 plus gt-I1901p, then installed supersu and rom manager....I wanted to flash custom rom. So first I done recovery clock mode 6.0.4.5 or something not sure than I done a backup and than I download pac man custom rom......and when I try to falsh it with rom manager did not work.....I try it manualy 3-4 times and also did not work... every time was some kind of error and after each time I done reboot system now and everything was normal...only after last boot somehow it could not reboot....it was md5 data error...I try it several times and finaly I did advanced recovery and start from data and aggain error......so I just turn it off and on and my phone was fine....but I did not have some of my app......viber, skype, rom manager....I try it to install rom manager aggain and than I had an errod code -24...what should I do know.
Click to expand...
Click to collapse
This could be caused by the corruption of google play store files. You should reinstall rom and install the proper gapps file. Make sure to wipe system, cache, data and dalvik cache before reinstalling any rom. md5 errors are caused by the corruption of flashable cwm zip files. Try a different rom and this should fix your problems.
error-24
gsstudios said:
This could be caused by the corruption of google play store files. You should reinstall rom and install the proper gapps file. Make sure to wipe system, cache, data and dalvik cache before reinstalling any rom. md5 errors are caused by the corruption of flashable cwm zip files. Try a different rom and this should fix your problems.
Click to expand...
Click to collapse
thank you very much......I allready installed new ROM Cyanogenmod 11 and full GAPPS 4.4.2 with Rom Manager and everything is ok now.:good:

Categories

Resources