Related
Does it really help to have a screen protector on STR? My nook is always inside a case, and always have some finger smudges on the screen, which does not interfere with reading the screen content.
Would it make the screen harder to use, such as in a resistive screen? I know it has IR technology, not resistive lcd, but it is good to know...
I have a screen protector, because I have cats and dogs who're lurking around my nook, and I'd hate to see them scratch the screen. I'm not using any case for it. The film does not affect the touch sensitivity in any way...
thanks for the info, emarusceac.
I can see dogs and cats and stuff being a problem. I just have an old NC sleeve laying around that works. If you can stand the wait, ebay is cheap Turns out the NC and NST width is the same...
emarusceac,
what sort of screen protector are you using?
Hi mh127,
I'm using a basic anti-glare screen film from ebay.
The nst is the first touch screen I have not used one on.
It is perfect now, the matte should hide small scratches, it gets used more lightly than phones/tablets, it is light (less damage if dropped), and it is cheap!
I am going to buy one.
I must warn you that it's VERY hard to apply it smoothly. I mean you'll get some air pouches caused by small particles, those bubbles won't go away no matter what you do. I prefer bubbles to permanent scratches though....
emarusceac said:
I must warn you that it's VERY hard to apply it smoothly. I mean you'll get some air pouches caused by small particles, those bubbles won't go away no matter what you do. I prefer bubbles to permanent scratches though....
Click to expand...
Click to collapse
I ordered one. Was concerned that it would be tough to apply because of the high frame around the screen. Any tips how to apply well? You use a credit card to smooth the film down over the screen?
Oh one more thing. Has anyone tried removing one? Does it change or damage the screen in any way?
I have had several different screen protectors on my NST and none of them caused any damage when I removed them. I would note though that I have read that you must not apply a screen protector to the Glowlight, something about the built in screen protector and its light guide properties. I would also point out the one reason my NST has had multiple screen protectors is because they are so hard to apply without getting bubbles/lint between the screen and the film. The film I have on now I finally got applied without any bubbles/lint in the reading area, so it will hopefully be on there for a while. Make sure you are working in a CLEAN area and take great pains to get it lined up straight before actually applying it to the screen.
The NST doesn't need a screen protector, it really wont do much for the device, but if you really feel like spending the money for it go ahead.
The NSTG already has a protector built in, putting an extra one on would be like putting on an extra pair of latex gloves. It'll offer a little more protection, but it can get to be quite frustrating in terms of lost control. It's advised not to bother with a protector for the NSTG.
Personally unless you know you're going to have your NST in reach of creatures with claws, or lose objects with sharp edges the protective screen will do little for you. Even in those cases it's possible the screen would merely lessen the damage done rather than prevent it out right.
In regards to the NSTG and it's pre-installed screen protector, has anyone actually removed it? I've read lots of reports of people complaining about minor scratches and finger pressure marks causing the light to become very strong on those parts, wondering if removing the screen protector would fix that or whether it's instead a problem with the screen.
Xadious said:
In regards to the NSTG and it's pre-installed screen protector, has anyone actually removed it? I've read lots of reports of people complaining about minor scratches and finger pressure marks causing the light to become very strong on those parts, wondering if removing the screen protector would fix that or whether it's instead a problem with the screen.
Click to expand...
Click to collapse
They claim there is one, I claim they lie as there is no visible edge of one. If there was you wouldn't get the light flares from minor scratches. Adding one may protect the screen but no idea what it would do to the light guide properties of the screen. If you ever have to remove it I'd worry what would happen to the light guide layer.
Because gadgets capabilities/sppecs increase rapidly & prices drop fast too, unless it's expensive I forget about screen protectors if the device is cheapish (got mine cheap) & if it will be outdated in a couple of years. Specially if it's not an outdoor device like my phone. Or if the protector hampers speed / functionality to some degree. Also personally I rarely scratch tab screens unless it's a phone, my phones/tabs all have protectors put on from day one, but not doing my NTSG. YMMV.
Hi guys,
Is there a pre applied screen protector on the Tablet S? Looking closely at the corners of the screen to does look like it but I haven't found any confirmation of this. I have a scratch on my screen and would obviously like to fix that.
Note that it was exactly like this on my Sony Ericsson Xperia arc where I just removed the pre fit screen protector and found a perfectly unscathed glass screen below. SE however declares that they apply a "shatter proof film" to avoid cracked glass displays
Can anyone confirm for the Tablet S? Has anyone tried to remove it?
Thx
Mine never came with one lol
Are you sure? Looks exactly like my phone. You would never have guessed it is there and you need to look really closely.
I bought one last week, and I can confirm there is a screen protector on the Tablet. I bought it in The Netherlands
- SnEAky
Yes, there is indeed one applied from factory, just as there was with my Xperia Play. I did go ahead and add an anti-glare protector on top of mine so I essentially have two protectors on mind now, but I think for most the hassle and frustration of trying to apply a protector without dust/air bubbles etc, simply isn't worth it as you are already protected.
There is a screen protector on the Tablet S just like most of the Android phones from SonyEricsson.
It is quite different from what you can get in the market. The screen protector from the factory is to prevent cracks or breaks. The screen protectors selling on ebay or whatever amazon are for anti-scatching.
I was recommended not to removed the factory screen protector on my X10 once before but I did it. After removing the screen protector, the glass is quite fragile like iphone's. It ends up with cracks at the edge when I dropped my phone from my pocket. Because I was sitting at that moment, the height is approx. 30cm.
Sorry for my bad english.
Mine has a screen protector. It's a 16gb one from the US.
Thanks, looks like the scratch is just on the screen protector then which is good news
On Xperia phones we know it's fine to remove (providing you don't drop it) but would like to hear from someone with a Tablet S. The my scratches aren't big enough to motivate the increased risk of breaking the glass, yet at least..
I have scratch on my screen already, so worry... now since everyone said there is a screen protector I feel better...
It seems redundant to put another screen protector over the factory installed. I can tell there is one on mine since it feels like plastic when I touch the keyboard...Is everyone still putting the sony screen protector over the factory installed?
I did, but it was a b*tch to do so with all the bubbles. But I managed to get them all, but one. See no reason why not use an extra screen-protection when you got one.
Has anyone managed to get this screen protector off the screen? It's a terrible dust magnet so i want to get rid of it and put on the "other" sony one.
daClaus said:
Has anyone managed to get this screen protector off the screen? It's a terrible dust magnet so i want to get rid of it and put on the "other" sony one.
Click to expand...
Click to collapse
I used a fine kitchen knife and peeled it of gently. I did it on the sony lcd-protection. Not the pre-installed one.
kryddan said:
I used a fine kitchen knife and peeled it of gently. I did it on the sony lcd-protection. Not the pre-installed one.
Click to expand...
Click to collapse
Have you found that the sony screen protector has reduced screen sensitivity... especially when typing?
can't said that I had. Did not play around with the screen before i placed the protection over it. It feels fine and responsive. The only thing is that it gets a little harder when it's hot outside and your hands gets warm, but that goes for all touch-devices I guess.
ditto
the matte finish is worth any loss in sensitivity, its fine with the official sony extra cover on and the matte is a BIG diff.
In fact it was a major selling point for me IMO, saw it in store next to the samsung tabs and the glare was hilarious. It wasn't until I was checking the box contents that I realised that the matte finish was due to an extra cover, but since that was part of the deal I didn't care. I didn't realise that it would have any impact on touchscreen sensitivity (?), in my experience with other devices I've not seen such an effect.
I also bought the matte one and applied it over the "other" (since there seems to be no way to peel it of) screen protector. The matte finish is great, and the touch feeling is much better than before. The original screen felt sticky and kind of rubberish when swiping with the finger, the matte one feels more dry. Great improvement!
Didnt get one in the Netherlands, but myn Tablet was a Demo machine in a store
I bought the official Sony protector and I actually really don't like it. I got it on with no bubbles or dust, and the matte finish looks nice when you put it on and feels nice when swiping etc.
Unfortunately, in my case, the touch sensitivity took a steep dive and made swiping vertical lists, vertical combo boxes, etc a real pain to do. By far the worst thing I've found is that the official protector leaves horrid fingerprint marks all over the screen, which kind of ruins the Sony's lovely sleek and shiny looks.
I love my Tablet to pieces, but the official protector I bought here in Australia is truly dreadful.
Don't be a fool, leave the factory applied protector on. It would be like peeling the safety film off of your windshield on your car. There is no practical benefit from doing it.
Either buy a clear aftermarket one or the matte Sony one, but don't degrade your tablet. If you have kids, however, encase it in carbonite ASAP.
Hi
My 2 years old daughter made me drop my tab
The tab is still fine but there are some scratches.
When powered up, I don't see them, except one, but it's annoying...
I am wondering if there is any way to remove them ? ( I don't think so )
So my question is : if I put a screen protector, could it hide these scratches a bit ?
If so, what about ArmorSuit ?
thanks for you help
Everything really depends on how big/deep the scratches are. If this were not such an expensive electronic device, I'd say use a glass/plastic polish, but I wouldn't recommend it for this. A screen protector might help hide some of the scratches, but to be honest, I couldn't promise anything. The screen protector may alter the way the light hits those scratches or the way it is reflected, so it may in fact do what you want, but its utility is going to be all tied up in the way the screen protector is made, whether it's matte or glossy, etc. You might have luck hiding the scratches with a Zagg Invisible Shield. I wish I could give you a more definitive answer. Hope this has been at least somewhat helpful.
thank you
Hi guys,
I was a stupid and put some toothpaste on my phone in the hopes of getting some existing scratches out, it turns out it made my phone even more scratched. There are a bunch of micro scratches and pixelations on my phone now. I heard that the anti glare or privacy screen protectors help cover up the scratches. Is this true, and if so, which of the two is better? Thank you very much!
Anyone care to reply?
Hi guys.
I have this phone since 2 weeks and today I realize that I have a tiny scratch long about a nail over in the bottom-right of the screen.
Is that possible? I can feel with my nail that is a scratch, really really thin and with screen on its invisible but under a light it's visible.
I really disappointed because I'm taking care of it like a baby. Gorilla glass 4 isn't so strong at least, and now do I need a screen protector? Really?
Anyone have problem like this?
Gggrrrrrrr
Hi,
Gorilla Glass 4 does not mean the display can't get any scratches. And yes, if you're unlucky you get a scratch the first day of use. All it needs is a little sand and/or stone in your pocked (just an example) and it can happen. I don't care what the manufacturer of the phone promises or uses as display glass. I have always a good display protection foil or tampered glass on my phones.
Nothing new. I have some micro scratches too. The best thing which you can do is buying a glass protector.
Metaldroidiano said:
Hi guys.
I have this phone since 2 weeks and today I realize that I have a tiny scratch long about a nail over in the bottom-right of the screen.
Is that possible? I can feel with my nail that is a scratch, really really thin and with screen on its invisible but under a light it's visible.
I really disappointed because I'm taking care of it like a baby. Gorilla glass 4 isn't so strong at least, and now do I need a screen protector? Really?
Anyone have problem like this?
Gggrrrrrrr
Click to expand...
Click to collapse
i had exactly the same issues.
at right up corner i get multiple scratch. rest of the phone is ok. i guess GG4 on LGv10 had some issue. what i did was trying to remove coating cover and re-apply a new one called crystalusion. it didnt repair 100% but situation get improved. to remove the Oleophobic coating you need something like car scratch remover.
see ya