Important: The Fast boot option in Settings > Power must not be selected.
Press and hold the VOLUME DOWN button, and then press and hold the POWER button.
Wait for the screen with the three Android images to appear, and then release the POWER and VOLUME DOWN buttons.
Press VOLUME DOWN to select FACTORY RESET, and then press the POWER button.
htc one max hard reset
but "The Fast boot option in Settings > Power must not be selected"
do a trick
first press and hold power button then do restart wile restarting hold the volume down button you will reach in to boot loader
.:good::good:
Help, if you can
jowelvjoy said:
Important: The Fast boot option in Settings > Power must not be selected.
Click to expand...
Click to collapse
My fast boot option is selected, I forgot my password & I'm locked out of my one max. I can't hard reset it (because it just turns the phone on) & I can't adb in to reboot. Any ideas? *aargh*
Sorry, I obviously didn't carefully read what you'd posted. I used your trick and it worked beautifully, thanks so much!
Related
there is nothing in the wiki or anywhere that explains how to hard reset (unles i just missed it somewhere)
Not sure if they apply to the CDMA but here are the ones from the Wiki:
http://wiki.xda-developers.com/index.php?pagename=Raphael_For_Beginners
I use a variation of those on my GSM RAPH, try #1 to see if it works for your CDMA RAPH:
1) Hard Reset
- Turn off
- Press & hold Action
- Press & hold Volume Down
- Turn on
- Wait for TriColor Bootloader and release buttons
- Follow onscreen instructions
2) Bootloader for Flashing new NBH
- Turn off
- Press & hold Volume Down
- Turn on
- Wait for TriColor Bootloader and release button
- Start ROM Flash utility on PC. If flashing a RAPHIMG.NBH on SDCard, flash begins automatically.
HTH,
For my sprint tp, I've found the easiest way is with the device turned off, I press the vol. down then the center of dpad while holding both then press the on/off button holding all three untill the onscreen instructions appear.
this thing will NOT hard reset, its about to go HARD against the wall LOL
I get a window that says
"warning"
power will be turned off,
and you may lose data if
you have not saved them.
Do you want to continue?
if i hit yes it just rebbots, and obviously if i hit no it does nothing
just cleared storage and will try after to hard reset.
NOPE still not working, im holding the vol down and the enter key then pressing the power button on top and holding all three down and i still get the same message.
even tried it with vol down/dpad/power and noada zip zilch zero
Tregrad said:
this thing will NOT hard reset, its about to go HARD against the wall LOL
I get a window that says
"warning"
power will be turned off,
and you may lose data if
you have not saved them.
Do you want to continue?
if i hit yes it just rebbots, and obviously if i hit no it does nothing
just cleared storage and will try after to hard reset.
NOPE still not working, im holding the vol down and the enter key then pressing the power button on top and holding all three down and i still get the same message.
even tried it with vol down/dpad/power and noada zip zilch zero
Click to expand...
Click to collapse
Do you happen to have a Verizon Touch Pro, if so the only way to Hard Reset is to do Clear Storage under Settings, System.
Can someone please set out in easy to follow steps how I can safely reset my Streak 5 to a factory fresh state.
Many thanks!
go to Settings - Privacy - Factory data reset and push Reset phone.
Turn it off. When off, push vol up and vol down, and turn ir up. When Dell logo appears, release power button but continue pressing vol up and vol down. Then, you'll see a menu, and there is FACTORY RESET.
Please use the Q&A Forum for questions Thanks
Moving to Q&A
netomx said:
Turn it off. When off, push vol up and vol down, and turn ir up. When Dell logo appears, release power button but continue pressing vol up and vol down. Then, you'll see a menu, and there is FACTORY RESET.
Click to expand...
Click to collapse
netomx
In reply to my question on factory reset you said 'Turn it off. When off, push vol up and vol down, and turn ir up.'
What do you mean by 'and turn ir up?'
He meant to say "turn it on".
Turn the Streak off.
While holding down the volume up and volume down buttons, press and hold the power button until the Dell logo appears.
Release the power button, but continue holding the volume buttons until Dell's recovery menu appears on the screen.
Using the volume buttons, select option 1, factory reset, then press the camera button.
Follow the instructions on the screen to reset.
Note: this this requires a stock recovery image to work. If the device has Streakmod Recovery or Clockworkmod, replace them with a stock recovery image before attempting to reset.
(sorry about my chinglish )
So here's how:I locked my nexus10 and forgot the password, and I do not see the "Forgotten" button on the screen and also I didn't turn USB debugging mode on, so is there any possibility I can save my data instead of cleaning them up? Thank you (btw, I deleted the original recover files(because I once booted Ubuntu Touch on it) how can I reset it anyway?) Tanks a lot
Don't think there's a way..
And you should be glad because if it was possible anyone could break into your device.
P.S.
chinglish - like!
eytan123 said:
Don't think there's a way..
And you should be glad because if it was possible anyone could break into your device.
P.S.
chinglish - like!
Click to expand...
Click to collapse
yeah........I see, so how can I clean everything, the recovery is dead and I didn't turn the debugging mode on
Right from Google:
1.If your tablet is on, power it off.
2.Press and hold Power, Volume Up, and Volume Down at the same time for several seconds. You will see the word Start with an arrow drawn around it.
3.Press Volume Down twice, until you see the option Recovery mode.
4.Press Power to restart into Recovery mode. You should see an image of an Android with a red exclamation point.
5.While holding down Power, press Volume Up.
6.Use the Volume keys to scroll to Wipe data/factory reset and press Power to select it.
7.Scroll down to Yes - erase all user data and press Power to select it.
Note: If at any point during the above steps your tablet becomes unresponsive, you can restart it by holding down the Power button for several seconds.
eytan123 said:
Right from Google:
1.If your tablet is on, power it off.
2.Press and hold Power, Volume Up, and Volume Down at the same time for several seconds. You will see the word Start with an arrow drawn around it.
3.Press Volume Down twice, until you see the option Recovery mode.
4.Press Power to restart into Recovery mode. You should see an image of an Android with a red exclamation point.
5.While holding down Power, press Volume Up.
6.Use the Volume keys to scroll to Wipe data/factory reset and press Power to select it.
7.Scroll down to Yes - erase all user data and press Power to select it.
Note: If at any point during the above steps your tablet becomes unresponsive, you can restart it by holding down the Power button for several seconds.
Click to expand...
Click to collapse
The recovery has been deleted by me when I boot Ubuntu Touch on it
u cant get download mode and flash recovery? debuging must be on to do it? i dont think should be on.
Sent from my GT-I9100
Fastboot
You can use Fastboot without USB Debugging enabled.
"To use fastboot, power off, then hold down the power button and both volume buttons. That will take you to the bootloader screen where you, or the toolkit, can do fastboot commands."
I've attached a CWM Recovery image for your device.
Place it somewhere on your computer and open the Terminal application on your computer. Run the following command:
fastboot flash recovery <image location>
Then you can backup /data using advanced backup, perform a factory reset, CREATE A FULL BACKUP, then restore /data using advanced restore.
hello,
i forgot my pattern. and i dont see where to recovery it .
i always use Fingers to unlock my phone
please help.
Here is instruction , but you will lose all data .
http://www.hardreset.info/devices/sharp/sharp-aquos-crystal-2/hardreset/first-method/
Teddy Lo said:
Here is instruction , but you will lose all data .
http://www.hardreset.info/devices/sharp/sharp-aquos-crystal-2/hardreset/first-method/
Click to expand...
Click to collapse
does not work on my aquos s2, not crystal 2. thanks anyway
This is for your device what I found on the Russian site .
1. First turn off the device
2. For a few seconds, hold down the Volume (+) + Turn on
3. When we see the Android image or the Sharp logo on the display, we stop clicking on the buttons
4. Press the Enable button to enter Recovery
5. In the menu, select wipe data / factory reset using the Volume Control buttons and confirm by pressing the Power key . 6. Then in the menu, select Yes - delete all user data by pressing the Volume Control keys and confirm the selection by pressing the Power key 7.
Teddy Lo said:
This is for your device what I found on the Russian site .
1. First turn off the device
2. For a few seconds, hold down the Volume (+) + Turn on
3. When we see the Android image or the Sharp logo on the display, we stop clicking on the buttons
4. Press the Enable button to enter Recovery
5. In the menu, select wipe data / factory reset using the Volume Control buttons and confirm by pressing the Power key . 6. Then in the menu, select Yes - delete all user data by pressing the Volume Control keys and confirm the selection by pressing the Power key 7.
Click to expand...
Click to collapse
you are right when my phone connect to my Pc
Thanks alot.
I have the same problem but can not doing the hard reset like the way you show here
It turned on the phone again after i press any button when seeing the logo, even trying to connect to pc
Please show me the other way
Thank you so much
UyenNguyen said:
I have the same problem but can not doing the hard reset like the way you show here
It turned on the phone again after i press any button when seeing the logo, even trying to connect to pc
Please show me the other way
Thank you so much
Click to expand...
Click to collapse
press both volume + and power button. ultil android logo appear
Old LG G5 I had previously installed Lineage on. Was in a drawer until I decided to charge it up and let one of my kids play games on it. When I input the correct screen lock pattern, it goes black, then comes back to lock screen.
I am able to hold power button to then select power off, restart, etc. From power off, I power on and get the orange triangle recommending to lock the bootloader. But no combination of power and vol-down or power and vol-up will get me to TWRP. It just rolls right back in to Lineage.
Also, from power off, if I plug in to my Linux laptop, it will power on and go to fastboot.
Feels like USB debug got turned off and/or trust somehow got revoked, but I never had this laptop connected to it so probably doesn't matter. But like I said, my unlock pattern is working. I get different response with correct pattern versus incorrect.
I'm also able to see the phone from my https://google.com/android/devicemanager page. I tried to send a secure and erase thinking it might let me start from scratch, but I only see a notification that "Device Located" and it never does anything.
And finally, lsusb -v does see the phone, but adb devices never does.
My question is any idea how to get back to TWRP to wipe and push an updated image or even put an updated TWRP?
Try this ...
It's like getting into Stock Recovery. To get into TWRP Recovery using button combination (hard reset) you'll need to hold volume down button and power button simultaneously, releasing power button (temporarily) once LG logo appears then quickly pressing and holding power button again, all the while maintaining hold on volume down button. The stock recovery message (white background) will appear requiring you to select volume up/down button to continue to reset software (see attached image). If you select yes it will appear to factory reset but will actually boot into TWRP.
Hope that helps!
Aimless Rambler said:
It's like getting into Stock Recovery. To get into TWRP Recovery using button combination (hard reset) you'll need to hold volume down button and power button simultaneously, releasing power button (temporarily) once LG logo appears then quickly pressing and holding power button again, all the while maintaining hold on volume down button. The stock recovery message (white background) will appear requiring you to select volume up/down button to continue to reset software (see attached image). If you select yes it will appear to factory reset but will actually boot into TWRP.
Hope that helps!
Click to expand...
Click to collapse
That did the trick! Thanks a ton.
dwcasey said:
That did the trick! Thanks a ton.
Click to expand...
Click to collapse
Good to hear!