Hi Guys
Well my phone have the Cyanogenmod Cm 11 Kit Kat 4.4.4 installed and was working really fine , now it has the last update from cyanogenmod, and the other day without any drop or whatever ,my touchscreen started to fail a bit like sometimes it responded and sometimes not, to the point where now the only key that works is the back key and the physical home button, everything else is dead i cant touch anywhere now, can you tell me if this is a hardware problem or a software ? i installed many versions of cyanogenmod to test, but the screen still dont respond, now i have installed the last update 4.4.4, need help please.
Thanks
PS. sorry for my english
helderhalen said:
Hi Guys
Well my phone have the Cyanogenmod Cm 11 Kit Kat 4.4.4 installed and was working really fine , now it has the last update from cyanogenmod, and the other day without any drop or whatever ,my touchscreen started to fail a bit like sometimes it responded and sometimes not, to the point where now the only key that works is the back key and the physical home button, everything else is dead i cant touch anywhere now, can you tell me if this is a hardware problem or a software ? i installed many versions of cyanogenmod to test, but the screen still dont respond, now i have installed the last update 4.4.4, need help please.
Thanks
PS. sorry for my english
Click to expand...
Click to collapse
Try flashing ICS/GB, but I doubt it will help. Unfortunately it sounds like a hardware problem
Grof87 said:
Try flashing ICS/GB, but I doubt it will help. Unfortunately it sounds like a hardware problem
Click to expand...
Click to collapse
Will try that but i think its a hardware problem too , i just want to be sure ,to buy a new display and make it work.
helderhalen said:
Will try that but i think its a hardware problem too , i just want to be sure ,to buy a new display and make it work.
Click to expand...
Click to collapse
Can you post the link for the ICS/GB?? i want to download that.
Thanks
did you found the fix?, i'm having a similar issue, sometimes the back button just stop working, i'm also on cm11
jesus.sea said:
did you found the fix?, i'm having a similar issue, sometimes the back button just stop working, i'm also on cm11
Click to expand...
Click to collapse
No man its been the same , but i didnt try another rom so , but i doubt it is the cyanogenmod causing the problem since it always worked great, i just want to know if this is a hardware problem or software one.
jesus.sea said:
did you found the fix?, i'm having a similar issue, sometimes the back button just stop working, i'm also on cm11
Click to expand...
Click to collapse
If back button stops working sometimes, try opening keyboard(xperia or aosp whichever) and then try again to see if back button works or not.
If it works- it means your keyboard gets killed and as a result back button stops working or you have greenified keyboard or it occurs after you exit from heavy games. Try it
---------- Post added at 02:27 AM ---------- Previous post was at 02:20 AM ----------
helderhalen said:
Hi Guys
Well my phone have the Cyanogenmod Cm 11 Kit Kat 4.4.4 installed and was working really fine , now it has the last update from cyanogenmod, and the other day without any drop or whatever ,my touchscreen started to fail a bit like sometimes it responded and sometimes not, to the point where now the only key that works is the back key and the physical home button, everything else is dead i cant touch anywhere now, can you tell me if this is a hardware problem or a software ? i installed many versions of cyanogenmod to test, but the screen still dont respond, now i have installed the last update 4.4.4, need help please.
Thanks
PS. sorry for my english
Click to expand...
Click to collapse
There Are Lot Of guides available in general section to fix broken touchscreen problem. Try it http://forum.xda-developers.com/showthread.php?t=2104484
Personally by installing cm 9,10,11 didn't work for me. Fix 9 worked for me.Hope it helps
Dr. Joy Das said:
If back button stops working sometimes, try opening keyboard(xperia or aosp whichever) and then try again to see if back button works or not.
If it works- it means your keyboard gets killed and as a result back button stops working or you have greenified keyboard or it occurs after you exit from heavy games. Try it
---------- Post added at 02:27 AM ---------- Previous post was at 02:20 AM ----------
There Are Lot Of guides available in general section to fix broken touchscreen problem. Try it http://forum.xda-developers.com/showthread.php?t=2104484
Personally by installing cm 9,10,11 didn't work for me. Fix 9 worked for me.Hope it helps
Click to expand...
Click to collapse
Where do i find .62 firmware ??
Thanks
helderhalen said:
Where do i find .62 firmware ??
Thanks
Click to expand...
Click to collapse
Here you go my friend: http://forum.xda-developers.com/showthread.php?t=1439298 Try mirror link
For other versions: http://forum.xda-developers.com/showpost.php?p=27376024&postcount=3
Dr. Joy Das said:
Here you go my friend: http://forum.xda-developers.com/showthread.php?t=1439298 Try mirror link
For other versions: http://forum.xda-developers.com/showpost.php?p=27376024&postcount=3
Click to expand...
Click to collapse
Can someone explani me these steps better? do i need to go to CWM to install the zips? or just with the flashtool? Im newbie in this
Fix 9: By flashing Real ICS R6: (Credits: Kenzeu ; here)
Steps:
1. Flash .62 firmware for your device
2. Flash rage kernel for gingerbread
3. Flash Real ICS R6 rom (choose the wrong device)
4. Reboot (don't pull the battery, boot it. If it's no booting for nearly 3 minutes, pull battery and go on)
5. Flash the stock firmware for your device
6. Touch should work now!
helderhalen said:
Can someone explani me these steps better? do i need to go to CWM to install the zips? or just with the flashtool? Im newbie in this
Fix 9: By flashing Real ICS R6: (Credits: Kenzeu ; here)
Steps:
1. Flash .62 firmware for your device
2. Flash rage kernel for gingerbread
3. Flash Real ICS R6 rom (choose the wrong device)
4. Reboot (don't pull the battery, boot it. If it's no booting for nearly 3 minutes, pull battery and go on)
5. Flash the stock firmware for your device
6. Touch should work now!
Click to expand...
Click to collapse
Real ICS R6 rom should be in your memory card
First flash 0.62 ftf file using flashtool program
Now flash rage kernel using flashtool program
Go to CWM, flash Real ICS rom...... but select wrong device e.g if your mobile is mini pro, select satsuma(active) as your phone
Reboot (don't pull the battery, boot it. If it's no booting for nearly 3 minutes, pull battery and go on)
Flash again 0.62 ftf using flashtool program
Check if touch is working now
If unsuccessfull, try other methods.. no choice:crying:
If all methods fail, then only repair the touchscreen. By friend also had sam problems but after such tedious process his touchscreen worked finally
Dr. Joy Das said:
Real ICS R6 rom should be in your memory card
First flash 0.62 ftf file using flashtool program
Now flash rage kernel using flashtool program
Go to CWM, flash Real ICS rom...... but select wrong device e.g if your mobile is mini pro, select satsuma(active) as your phone
Reboot (don't pull the battery, boot it. If it's no booting for nearly 3 minutes, pull battery and go on)
Flash again 0.62 ftf using flashtool program
Check if touch is working now
If unsuccessfull, try other methods.. no choice:crying:
If all methods fail, then only repair the touchscreen. By friend also had sam problems but after such tedious process his touchscreen worked finally
Click to expand...
Click to collapse
Thanks i will try that, then after, if touchscreen works can i install cm 11 again? or i will lose root and bootloader?
It worked man thank you so much, running the last cm 11 , touchscreen working great, solution found glad i didnt bought a new display ha ha.
Thanks
helderhalen said:
It worked man thank you so much, running the last cm 11 , touchscreen working great, solution found glad i didnt bought a new display ha ha.
Thanks
Click to expand...
Click to collapse
Great to hear it helped. All members will always be there to help you and remember to hit thanks button if the posts really helped you:good:
Thanks button helps others who have faced same problem to go through posts most thanked and helped so that they can also solve problem by same method
Dr. Joy Das said:
Great to hear it helped. All members will always be there to help you and remember to hit thanks button if the posts really helped you:good:
Thanks button helps others who have faced same problem to go through posts most thanked and helped so that they can also solve problem by same method
Click to expand...
Click to collapse
hi me too same problem tried all method
finally this method also but not working
i used cm11 bean stalk suddenly touch did not worked
so i flasjhed directly ics stock rom
then touch fully not working
pls help
fairy123 said:
hi me too same problem tried all method
finally this method also but not working
i used cm11 bean stalk suddenly touch did not worked
so i flasjhed directly ics stock rom
then touch fully not working
pls help
Click to expand...
Click to collapse
Have you tried this link http://forum.xda-developers.com/show....php?t=2104484
If all methods fail from here, then may be it has some hardware problem
Dr. Joy Das said:
Have you tried this link http://forum.xda-developers.com/show....php?t=2104484
If all methods fail from here, then may be it has some hardware problem
Click to expand...
Click to collapse
link not found
web page not there
fairy123 said:
link not found
web page not there
Click to expand...
Click to collapse
forum.xda-developers.com/showthread.php?t=2104484 is the link by mihahn.It is working for me. If it doesn't work, try searching general forums second page
[How-To] Fix Broken Touchscreen of xperia 2011 mdpi devices [UPDATED-18.07.13]
Dr. Joy Das said:
forum.xda-developers.com/showthread.php?t=2104484 is the link by mihahn.It is working for me. If it doesn't work, try searching general forums second page
[How-To] Fix Broken Touchscreen of xperia 2011 mdpi devices [UPDATED-18.07.13]
Click to expand...
Click to collapse
ya working thanks
but when i flash bean stalk kernel screen turns black remaining kernel booting
display light not coming hangs in boot logo with out display light
fairy123 said:
ya working thanks
but when i flash bean stalk kernel screen turns black remaining kernel booting
display light not coming hangs in boot logo with out display light
Click to expand...
Click to collapse
Please ask in the beanstalk thread, I have never used it.
Related
Hey there folks,
I'm a global moderator from MadTeam and working on the development of the ICS, first specialized just for Galaxy 5 and now is a great site for news and other cells and tabs development.
So, cutting the crap, this is the new page for the ICS for galaxy 5 on this site, and all the latest releases will be shared here. And here we go:
Thread Updated For Latest Release:
Alpha 3 released
Gapps revised by MadTeam
What is working:
. Audio
. SMS, MMS etc...
. Wifi
. Keyboard
In progress:
Camera and the good rest
How to Install ROM:
. Back Up your current stable ROM.
. Perform data wipe/factory reset.
. Go to Advanced and perform wipe dalvik cache
. Install the CM9 release.
. Install hotfix.
. Wait 5-10 minutes for first boot to complete (odexing).
Hotfix
UPDATE:
I fixed the issues with alpha 3 fixed and,
No orange flashs on the screen anymore, I've added a new kernel, framework and other things, so no need to install alpha 1 now
FOLLOW THE INSTALL GUIDE STEP BY STEP,
THIS IS AN ALPHA VERSION AND CAN EXPLODE YOUR PHONE
hy there. i download allmost all packages less then ics root package. i cannot access the file. can u reupload and paste the links. please.
DjSylvester said:
hy there. i download allmost all packages less then ics root package. i cannot access the file. can u reupload and paste the links. please.
Click to expand...
Click to collapse
Updated,
thx.
great! will glad to flash cm9 on my little brother's galaxy 5!
keep up the great job.
i have downloaded all the stuff except the root because of the fbi taking down megaupload. if it is possible to reupload to different site tnx
patsplantes said:
i have downloaded all the stuff except the root because of the fbi taking down megaupload. if it is possible to reupload to different site tnx
Click to expand...
Click to collapse
I would like that also
Thanks for this!
If you need help with testing the rom then send me a message whenever, my G5 is just collecting dust so I might as well get some use out of it, I honestly don't care if it breaks as the warranty has ran out anyway.
MrBC said:
I would like that also
Click to expand...
Click to collapse
patsplantes said:
i have downloaded all the stuff except the root because of the fbi taking down megaupload. if it is possible to reupload to different site tnx
Click to expand...
Click to collapse
Just click on the Wupload link
Thread update.
thanks for the update
but your download link at the end of first post is not working can you pls fix that
Tested
I didn't read the part about the exploding phone correctly or i would never have done it!
Startup was just the screen flashing bright yellow rapidly for about 30 seconds and then going dark. If you touched the screen or buttons then the display would activate and you can see it for a moment. I managed to get through the setup wizard to the main screen, the app drawer and access the rom manager app. Then rebooted into recovery from the home screen and restored my phone to cm7 1.9.
Amazing that i (on some level) had ics running on my phone Well done guys!
cmw was different too, it had a ***go back*** option at the bottom of each additional screen.
Exactly same here.
It have the *go back* button cuz is a cwm 5.2.7 based.
You must follow the guide correctly.
Chucky-PT said:
Exactly same here.
Click to expand...
Click to collapse
Does data not work for anyone else?
EoinSheehy said:
Does data not work for anyone else?
Click to expand...
Click to collapse
Data doesn't work in this version due to incompatibility with some European chips so mota disabled it
Sent from my GT-I5500 using Tapatalk
derrend said:
I didn't read the part about the exploding phone correctly or i would never have done it!
Startup was just the screen flashing bright yellow rapidly for about 30 seconds and then going dark. If you touched the screen or buttons then the display would activate and you can see it for a moment. I managed to get through the setup wizard to the main screen, the app drawer and access the rom manager app. Then rebooted into recovery from the home screen and restored my phone to cm7 1.9.
Amazing that i (on some level) had ics running on my phone Well done guys!
cmw was different too, it had a ***go back*** option at the bottom of each additional screen.
Click to expand...
Click to collapse
Thread updated no orange screen anymore.
installation problems
Installed the fix fine but clockworkmod displays an error when flashing mad rom apps. Had no problem with gapps previously so suspect fix.
derrend said:
Installed the fix fine but clockworkmod displays an error when flashing mad rom apps. Had no problem with gapps previously so suspect fix.
Click to expand...
Click to collapse
Definitive and tested Alpha 3 for Galaxy 5,
Storage access and new yellow boot animation included(New CM9 3d boot animation)
Permission to install Gapps working.
hyztname said:
Definitive and tested Alpha 3 for Galaxy 5,
Storage access and new yellow boot animation included(New CM9 3d boot animation)
Permission to install Gapps working.
Click to expand...
Click to collapse
It works but is no more usable than previous version of alpha.
We do all appreciate the hard work though hyztname so keep at it
What i want is to play with some new features and show off to my friends but i suppose that's what beta is for
Too impatient.
derrend said:
It works but is no more usable than previous version of alpha.
We do all appreciate the hard work though hyztname so keep at it
What i want is to play with some new features and show off to my friends but i suppose that's what beta is for
Too impatient.
Click to expand...
Click to collapse
Yeah you are right,
But we all have to start from the small part.
Thx for the appreciation.
Hi!
I have this bug on my Xperia U, this happens in every rom that I tried, only on stock rom and other UI works fine (I extracted others ui's and replaced with ES File Explorer). Happens on .54, .89 and now on .100, I'm the only one?
- Sorry for bad english
sim1.subirimagenes.net/img/2013/07/17/13071710140041884.png
(I can't share the image :c)
XpaDDer said:
Hi!
I have this bug on my Xperia U, this happens in every rom that I tried, only on stock rom and other UI works fine (I extracted others ui's and replaced with ES File Explorer). Happens on .54, .89 and now on .100, I'm the only one?
- Sorry for bad english
sim1.subirimagenes.net/img/2013/07/17/13071710140041884.png
(I can't share the image :c)
Click to expand...
Click to collapse
Can't understand exactly what happens mate since i can't see image. Edit you post and on the first toolbar you will see attachments. this way you will attach the image.
XpaDDer said:
Hi!
I have this bug on my Xperia U, this happens in every rom that I tried, only on stock rom and other UI works fine (I extracted others ui's and replaced with ES File Explorer). Happens on .54, .89 and now on .100, I'm the only one?
- Sorry for bad english
sim1.subirimagenes.net/img/2013/07/17/13071710140041884.png
(I can't share the image :c)
Click to expand...
Click to collapse
Well, if you are trying to say that you cannot change your brightness on custom ROMS and can change it on Stock ROM, then, it may be a bug on the custom ROMS. Almost all custom ROMS are made on the same base ROM which developers modify according to their needs and needs of the people. So maybe that's a permanent bug and will take some time to get fixed. No worry, you can always use the stock ROM. It's not so bad.
Image of bug!
moli2398 said:
Well, if you are trying to say that you cannot change your brightness on custom ROMS and can change it on Stock ROM, then, it may be a bug on the custom ROMS. Almost all custom ROMS are made on the same base ROM which developers modify according to their needs and needs of the people. So maybe that's a permanent bug and will take some time to get fixed. No worry, you can always use the stock ROM. It's not so bad.
Click to expand...
Click to collapse
I don't know, because when a rom like eXperience v2 is fresh it works, but randomly appears the bug (On the same day or some days after).
DaRk-L0rD said:
Can't understand exactly what happens mate since i can't see image. Edit you post and on the first toolbar you will see attachments. this way you will attach the image.
Click to expand...
Click to collapse
I attach the image
[/COLOR]
XpaDDer said:
I don't know, because when a rom like eXperience v2 is fresh it works, but randomly appears the bug (On the same day or some days after).
Click to expand...
Click to collapse
I use this mod i had no problems at all mate http://forum.xda-developers.com/showthread.php?t=2214096&highlight=systemui
Try it if you want.
Is the same
DaRk-L0rD said:
[/COLOR]
I use this mod i had no problems at all mate http://forum.xda-developers.com/showthread.php?t=2214096&highlight=systemui
Try it if you want.
Click to expand...
Click to collapse
I tried, but is the same, lol, I attach a screenshot
XpaDDer said:
I tried, but is the same, lol, I attach a screenshot
Click to expand...
Click to collapse
Don't know how to help you mate. Sorry
Edit: @XpaDDer this issue started after what? Installing an app,mod etc or suddenly with no reason?
DaRk-L0rD said:
Don't know how to help you mate. Sorry
Edit: @XpaDDer this issue started after what? Installing an app,mod etc or suddenly with no reason?
Click to expand...
Click to collapse
Is randomly, sometimes I tried again roms already downloaded, and happens without installing apps (fresh installation). Its rare, but is not a important thing for me, I only asks if happens to someone else. I don't know if is the UI or is the rom, the same UI works fine in stock, flashed at CWM (custom kernel in stock). Btw, any ideas?
Don't know what is exactly causing this bug.
I would advise you to do a complete fresh reinstall of the whole ROM
Sent from my Xperia U using xda app-developers app
Since you say that it appears randomly. Maybe the censor was not working. Then it is a hardware issue.
Mayank7795 said:
Don't know what is exactly causing this bug.
I would advise you to do a complete fresh reinstall of the whole ROM
Sent from my Xperia U using xda app-developers app
Click to expand...
Click to collapse
I do that too many times, now I'm in VeXU, flashed stock .100, CWM and flash rom. I don't know when happens, now is habitual to see for me .
wondertx said:
Since you say that it appears randomly. Maybe the censor was not working. Then it is a hardware issue.
Click to expand...
Click to collapse
In stock with an other UI. Also I tried a UI for CWM in stock and no problem , but I love the things of an custom rom. I can change brightness in Configuration, also attach a screenshot ,
EDIT: I can change brightness in the slider controller with this bug, also shows the current brightness (is hard to see), so is not hardware issue, is only visual
Good Morning,I am in need of some help have the 512/8gb Nook Tablet, I am by no means an "expert" when it comes to the Android system, with that said however, I have managed to flash quite a few rom's over the last year. This time I have flashed the Cyanogenmod,[OFFICIAL] Cyanogenmod 11.0 (Android 4.4) nightlies From here---> http://forum.xda-developers.com/showthread.php?t=2560827. and the 8/13/2013 KitKat gapps, and my problem is after it all flashes and after i reboot the system i do not have a so called "Desktop", I can pull down the status bar and can get to the settings but after looking through all the settings i thought maybe there was a setting that got changed but i could not find anything pertaining to my problem.. I would appreciate any and all help as i have searched all over the forums and i couldnt find anyone with the same or near circumstance ... Thanks, B.L
NiterunnerLigon said:
Good Morning,I am in need of some help have the 512/8gb Nook Tablet, I am by no means an "expert" when it comes to the Android system, with that said however, I have managed to flash quite a few rom's over the last year. This time I have flashed the Cyanogenmod,[OFFICIAL] Cyanogenmod 11.0 (Android 4.4) nightlies From here---> http://forum.xda-developers.com/showthread.php?t=2560827. and the 8/13/2013 KitKat gapps, and my problem is after it all flashes and after i reboot the system i do not have a so called "Desktop", I can pull down the status bar and can get to the settings but after looking through all the settings i thought maybe there was a setting that got changed but i could not find anything pertaining to my problem.. I would appreciate any and all help as i have searched all over the forums and i couldnt find anyone with the same or near circumstance ... Thanks, B.L
Click to expand...
Click to collapse
first thing.....explain wut u mean by no desktop? like no homescreen or no navigation bar on the bottom that allows u to go back or the home button (the house icon).
second thing.....if its the no navigation bar then thats a common problem with some nook tablet models.
third thing....make sure u are using cwm 6.0.4.5 to flash
fourth thing.....try flashing demetris's unofficial cm11 or go to cyanogenmod.org and start downloading the newest nightlies provided by the same guy who made the old cm11 version that u are using now.
get back to me with a thorough explaination on wut u see and are experiencing and i might be able to help u.
newbtrigger69 said:
first thing.....explain wut u mean by no desktop? like no homescreen or no navigation bar on the bottom that allows u to go back or the home button (the house icon).
second thing.....if its the no navigation bar then thats a common problem with some nook tablet models.
third thing....make sure u are using cwm 6.0.4.5 to flash
fourth thing.....try flashing demetris's unofficial cm11 or go to cyanogenmod.org and start downloading the newest nightlies provided by the same guy who made the old cm11 version that u are using now.
get back to me with a thorough explaination on wut u see and are experiencing and i might be able to help u.
Click to expand...
Click to collapse
Sorry took so long for me to get back to you, OK. the problem i was having was after i did the usual procedure to flash a rom, i was not getting any App launcher icons nor were there any widgets I.E. Time, or Date.. .I was even able to reboot and flash the gapps in 10-31-2013 Still wasnt working. Thank you much for the quick response time.
So by now, after 5 or more times flashing all this stuff I finally tried the last suggestion you made and woohoo it worked.What needed to be done was to make sure i had 6.0.4.5.Flashed .. Got it flashed and running as expected.
Again, Thanks Alot for the knowledge you shared with us here at the community newbtrigger69
NiterunnerLigon said:
Sorry took so long for me to get back to you, OK. the problem i was having was after i did the usual procedure to flash a rom, i was not getting any App launcher icons nor were there any widgets I.E. Time, or Date.. .I was even able to reboot and flash the gapps in 10-31-2013 Still wasnt working. Thank you much for the quick response time.
So by now, after 5 or more times flashing all this stuff I finally tried the last suggestion you made and woohoo it worked.What needed to be done was to make sure i had 6.0.4.5.Flashed .. Got it flashed and running as expected.
Again, Thanks Alot for the knowledge you shared with us here at the community newbtrigger69
Click to expand...
Click to collapse
anytime i can help fellow xda member :victory::victory::victory:
and if u can. remember to thank me on the tab don't want to fall behind on those
<------------------------------------------------
[Solved] galaxy mega 4.4.2 and 4.4.4 no touch or bootloop …" on galaxy mega 4.4.2
Hi guys
Many people have faced with touch screen issue in 4.4.2 or 4.4.2 roms this days.
Fortunately one of xda member solved this problem but he is new here and couldn't put video links.
androidreviewguy said:
I have figured this out and made a video on how to fix this issue follow all steps sorry for the poor video quality was my first one lol
edit so im new and xda wont let me post a link email me and ill send the link sorry
Click to expand...
Click to collapse
Because of that i decide to create a new topik to make it easy to find and solve this problem
Here's the solution
androidreviewguy said:
Watch "galaxy mega 4.4.2 and 4.4.4 no touch or bootloop …" on YouTube
galaxy mega 4.4.2 and 4.4.4 no touch or bootloop …: http://youtu.be/KYnTkbRI0_E
Be sure to subscribe to watch all 3 parts thanks
Click to expand...
Click to collapse
Thanks to
@androidreviewguy
========================================
As Dr_moosavi said. You can use any other custom roms with cm base such as c rom or......
I have tested his suggestion by myself.
Thanks to @DR_MOOSAVI
The Great Manager of www.and-roid.ir forum
++++++++++++++++++++++++++++++++++++++++++
Download link in 3rd post
Step by step guide in second post
++++
Sorry fo my bad English
awsome!
Thanks so much for posting this up for me !
---------- Post added at 03:27 PM ---------- Previous post was at 03:17 PM ----------
Any question lemme know all links are in the YouTube video as soon as I can post and get the restrictions off me I will make a step by step guide for none video watchers lol
Sent from my SGH-I317 using XDA
DOWNLOAD LINKS
Megafire rom
http://forum.xda-developers.com/showthread.php?t=2608110
Philz touch recovery (make sure you download the i9205 one)
http://forum.xda-developers.com/showthread.php?t=2588661
Odin 3.07
http://www.google.com/url?sa=t&rct=...=ydtAWCrkD2sZS5V7ft4KOg&bvm=bv.78597519,d.aWw
TWRP recovery
https://www.mediafire.com/folder/8uuvfvauztdna/MEGA_6.3#io4cb20raa155
Updated super su
http://download.chainfire.eu/420/SuperSU/UPDATE-SuperSU-v1.99.zip
What does thus solve?
I have a replaced screen on my MEGA and can run cm-11-20140921-UNOFFICIAL-meliusltexx, which is Cyanogenmod KitKat 4.4.2 (thanks Sileshn!)
I am unable to update CM-11 past that build due to the unresponsive touchscreen issue.
So how does this procedure 'fix' that problem? It looks like it just puts you on the MEGAFire ROM and 4.2.2 and then that is where you have to stay.
If you have a replacement screen and want the cm-11-20141019-UNOFFICIAL-meliusltexx build as another option or can host it, just let me know....
D
I'm running cm11 on it now after the megafire fix
Sent from my GT-N7105 using XDA Free mobile app
What build cm11 after the fix
Newest
Sent from my GT-N7105 using XDA Free mobile app
Can I verify that is cm-11-20141102-UNOFFICIAL-meliusltexx and ask what process you went through after your videos to install it?
I'm still having no luck. I can get the touch screen to work with MegaFireMj2V16XxX but after that I am at a loss how to install CM-11 and keep the touchscreen working.
Sorry if my frustration is showing I really do appreciate your help. Just been banging my head against this for over a month now...
Dave
I wonder if it has something to do with the different kinds of after market screens out there cause after the mega fire ROM in twrp and then did all nescisary wipes a d flashed the newest cm11 from selish Nair and it worked fine BUT as I read this I tried it on my other mega and its a no go really weird no touch screen at all
Sent from my GT-N7105 using XDA Free mobile app
androidreviewguy said:
I wonder if it has something to do with the different kinds of after market screens out there cause after the mega fire ROM in twrp and then did all necessary wipes a d flashed the newest cm11 from selish Nair and it worked fine BUT as I read this I tried it on my other mega and its a no go really weird no touch screen at all
Click to expand...
Click to collapse
Ahhhh I was afraid of that. I was really hoping it wasn't just me. Except I kinda was hoping it was just me.
Does anyone following this thread have possible alternate custom ROMs to try to get around the bad touchscreen issue?
Thanks,
Dave
I tried with AOSP instead megafire and it works perfectly. And I discovered in muy opinion this ROM really great.
davidrwhite said:
I have a replaced screen on my MEGA and can run cm-11-20140921-UNOFFICIAL-meliusltexx, which is Cyanogenmod KitKat 4.4.2 (thanks Sileshn!)
I am unable to update CM-11 past that build due to the unresponsive touchscreen issue.
So how does this procedure 'fix' that problem? It looks like it just puts you on the MEGAFire ROM and 4.2.2 and then that is where you have to stay.
If you have a replacement screen and want the cm-11-20141019-UNOFFICIAL-meliusltexx build as another option or can host it, just let me know....
D
Click to expand...
Click to collapse
flash this kernel http://forum.xda-developers.com/showthread.php?p=56122008#post56122008 after cm11
and touch will work even with newest version of cm11
sorry for my english
I followed the video up until the point where he boots into TWRP to install the mega zip. he shows using the touchscreen to select options in tarp...my touchscreen doesn't work at this point. what am i missing here? isn't this whole procedure necessary because the touchscreen doesn't work?
i have a i527m that i replaced the lcd/digitizer on and no touch because i had previously upgraded to 4.4.2 before busting the original screen
sae5xf said:
flash this kernel http://forum.xda-developers.com/showthread.php?p=56122008#post56122008 after cm11
and touch will work even with newest version of cm11
sorry for my english
Click to expand...
Click to collapse
AndroidSlave_Kernel_new.zip does not fix the touchscreen.
Android_Slave_Kernel.zip does fix the touchscreen, but unfortunately it breaks the phone app.
Error message that pops up is - Unfortunately, the process com.android.phone has stopped.
You can select "OK", showing the touch screen works, but the error message returns over and over again, making it impossible to use the phone.
Thanks for trying, I was really hoping that it was going to work.
David
davidrwhite said:
I have a replaced screen on my MEGA and can run cm-11-20140921-UNOFFICIAL-meliusltexx, which is Cyanogenmod KitKat 4.4.2 (thanks Sileshn!)
I am unable to update CM-11 past that build due to the unresponsive touchscreen issue.
So how does this procedure 'fix' that problem? It looks like it just puts you on the MEGAFire ROM and 4.2.2 and then that is where you have to stay.
If you have a replacement screen and want the cm-11-20141019-UNOFFICIAL-meliusltexx build as another option or can host it, just let me know....
D
Click to expand...
Click to collapse
Hi,
maybe helps
I had the same problem replacing the screen and found that my mega is well working with last AOSP, (thanks Sileshn!) attached details from my screenshoot
I just found I can not play with my favorites 2 chess app game, I do not know the reason. and during a phone call the screen is black until you cancell by power boton.
I am Spanyard, so sorry my english.
What's happend with TWRP recoverys in .zip mode?!!!
They are missing in all sites!!!!
Now, they only exist in .img and .tar mode
It's possible modify .img file to .zip?
Someone know how to does that?
Thank-you for the suggestion.
Yes, it does work and works well.
It is a stripped down version of CM-11 with less bells and whistles but it does run smoothly and has good battery life so I will be using it for now and hoping that someone builds a CM-12 for this phone and Lollipop will magically work, where KitKat has shown problems.
Your English is fine by the way, and thanks again for the suggestion.
Dave
Mega Screen problem
If all else fails replace the screen! Prior release Android compatible units will knowlonger work. We had four units to go out after the 4.4.2 upgrade! The aftermarkets mfg has a fix in flashing the chip. We had no problem swapping the old units out for replacements.. OEM will definitely work but if aftermarket is your budget make sure they've had the update!
TWRP recovery zip please
Here you can download the twrp recovery zip file ver. 2.7.0.5
bayanbox.ir/download/7999083162362874742/twrp-2.7.0.5.zip
some one upload it in a better palce..
I think this server may be limited.
good luck
Reza from Persia (Iran)
Q&A for [DEV][ROM] - Pantech Burst - CM-11.0 portinghttp://forum.xda-developers.com/android/development/dev-pantech-burst-cm11-0-porting-t2938360http://forum.xda-developers.com/android/development/dev-pantech-burst-cm11-0-porting-t2938360
Please use this thread to all questions not related with develop.
Greetings.
I didn't want to spam this thread with a useless "thank you" post but it's pretty quiet around here anyway so what the hey. THANK YOU SO MUCH!!! This is seriously freaking awesome. I was convinced development for the Burst was going to die with that final build of SlimBean. It feels so nice to be running KitKat (way to go, 4.4.4!) on this tiny little guy who refuses to die. That bug with the test build where opening SnapChat caused a kernel panic seems to be completely gone, so thanks for taking away my excuse for ignoring my SnapChat account lol. The battery life leaves much to be desired but I'm pretty sure that's the phone and not the ROM. Thank you so much again, this is excellent work :highfive:
thisisapoorusernamechoice said:
The battery life leaves much to be desired but I'm pretty sure that's the phone and not the ROM.
Click to expand...
Click to collapse
We must not forget that the device has a battery of 1600mA, for this reason it is normal that the the device have a short battery life.
There is always the possibility of purchasing an extra battery with external charger.
Greetings.
You're right of course and this is a great rom. I apologize if it came off like I was complaining or criticizing, this is great work and I'm utterly grateful to have cm11 on my old Burst.
Thank you mifl for cm11.
First of all thanks to all devs for cm11.
I am loving it by far.
Now on topic. I have two questions-
1). Is there any app that can control vibration intensity of phone, nothing from playstore works.?
DU rom from marduk have it inbuilt and works flawlessly but rom has bugs of wifi tethering, Bluetooth and random restart. I rely on tethering heavily so i am on cm11. Is there anyway i could get it on cm11?
2). Anyone facing any random restarts.?? I faced some random restarts recently when using multiple tabs of UCbrowser. Though i wasnt able to catch anything from log. I will post if it happens next time.
3). It is taking too much time to charge if handset is kept on usage.?? Well mine does. But charger is of samsung (.7A)..
Thanks for sharing this great Rom.
God bless you.
Thanks.
herecomesmaggi said:
First of all thanks for cm11. I am loving it by far.
Now on topic. I have two questions-
1). Is there any app that can control vibration intensity of phone, nothing from playstore works.? DU rom from marduk have it inbuilt and works flawlessly but rom has bugs of wifi tethering, Bluetooth and random restart. Is there anyway i could get it on cm11 of mifl.?
2). Anyone facing any random restarts.?? I faced some random restarts recently when using multiple tabs of UCbrowser. Though i wasnt able to catch anything from log. I will post if it happens next time.
3). It is taking too much time to charge if handset is kept on usage.?? Well mine does. But charger is of samsung (.7A)..
Thanks for sharing this great Rom.
God bless you.
Thanks.
Click to expand...
Click to collapse
First the rom is not my property. It is compiled from PantechDevTeam repositories.
If you want to get the DU version, you must wait to be released this compilation or you compile DU from marduk191 repositories.
Of the mistakes you've written would be important you will provide a log, to study errors.
Greetings.
Find a 1.0 A charger, it still won't be ideal but I think you'll notice improvement
Thank you for replying. I tried using Asus zenphone 5 charger of 1.25A it worked great.
Glad I could help. If I remember correctly it was your comments on the old CM 10 thread that originally led me to Slim Bean, which was a great improvement back on jelly bean. So thank you too lol
I have found a way to lower the intensity of vibration feedback of buttons..
You will need to decompile framework-res.apk and have to look for values. Xml in res folder some where at last there will be line <integer-array name="config_keyboardTapVibePattern"> Just change its value to suitable. Recompile and flash. Btw i am using value "2" instead of 40.
Thanks.
If u need a proper guide ping me...
whatsapp camera : black screen
i am using cm11 latest build. when ever i open camera in whatsapp application i see black screen.. but if i click the snap is taken.. same with bar code scanner app as well.. tried to check the log but there is no error registered for this.. i thing i have missed some setting..
Issues Installing Custom Firmware
First of all, thanks for all your work on Burst development. Here's my issue. I installed ICS from the Pantech website and then rooted my phone a year or two ago with "The Burst Hack Tools" mentioned in the instructions. I found the instructions to install custom firmware and tried installing CM11. Everything seemed to be going fine until I restarted my phone. I upgraded CWM to 6.0.2.7 touch version and retried. Same result. The third time I thought I may have forgot to wipe the cache so I was sure to do that. Same result. Question: Do I need to do a clean install of stock 4.0.4 Ice Cream Sandwich before intalling CM11? Thanks for your help.
---------- Post added at 06:41 PM ---------- Previous post was at 06:36 PM ----------
mifl said:
We must not forget that the device has a battery of 1600mA, for this reason it is normal that the the device have a short battery life.
There is always the possibility of purchasing an extra battery with external charger.
Greetings.
Click to expand...
Click to collapse
I've had good luck with this battery: Onite 1800mAh Battery for Pantech Burst P9070. Found on Amazon. I do notice the 200 mAh difference.
SparkyMcfly said:
First of all, thanks for all your work on Burst development. Here's my issue. I installed ICS from the Pantech website and then rooted my phone a year or two ago with "The Burst Hack Tools" mentioned in the instructions. I found the instructions to install custom firmware and tried installing CM11. Everything seemed to be going fine until I restarted my phone. I upgraded CWM to 6.0.2.7 touch version and retried. Same result. The third time I thought I may have forgot to wipe the cache so I was sure to do that. Same result. Question: Do I need to do a clean install of stock 4.0.4 Ice Cream Sandwich before intalling CM11? Thanks for your help.
Click to expand...
Click to collapse
Please see PDT Wiki page to install a new recovery to cm-11.0. After make this you must follow the Guide to Installing Custom Firmware in Pantech Burst Wiki Page.
Greetings.
mifl said:
Please see PDT Wiki page to install a new recovery to cm-11.0. After make this you must follow the Guide to Installing Custom Firmware in Pantech Burst Wiki Page.
Greetings.
Click to expand...
Click to collapse
Thanks for the directions. I flashed the latest version of CWM and reinstalled CM11. It has been working great. The only issue I've noticed is that if I turn off the phone and turn it back on, apps that have been moved to the external SD card "disappear". They are still there, I just have to add the icons back. From what I've read, this is a problem with Android? Any suggestions on how to fix it?
SparkyMcfly said:
Thanks for the directions. I flashed the latest version of CWM and reinstalled CM11. It has been working great. The only issue I've noticed is that if I turn off the phone and turn it back on, apps that have been moved to the external SD card "disappear". They are still there, I just have to add the icons back. From what I've read, this is a problem with Android? Any suggestions on how to fix it?
Click to expand...
Click to collapse
I have no answer to this, but I would also like to know if there is a work around or fix to this
SparkyMcfly said:
Thanks for the directions. I flashed the latest version of CWM and reinstalled CM11. It has been working great. The only issue I've noticed is that if I turn off the phone and turn it back on, apps that have been moved to the external SD card "disappear". They are still there, I just have to add the icons back. From what I've read, this is a problem with Android? Any suggestions on how to fix it?
Click to expand...
Click to collapse
This is a known bug in the code of Android 4.4. I think this can be solved with Xposed Module:
* http://www.xda-developers.com/fix-external-storage-handling-with-xposed-module/
Greetings.
Help with Xposed
mifl said:
This is a known bug in the code of Android 4.4. I think this can be solved with Xposed Module:
* http://www.xda-developers.com/fix-external-storage-handling-with-xposed-module/
Greetings.
Click to expand...
Click to collapse
So I installed Exposed from here: http://dl-xda.xposed.info/modules/de.robv.android.xposed.installer_v33_36570c.apk
Then I installed HandleExternalStorage from the Play store: Play Store: http://tinyurl.com/nnajr7f
I went into Exposed and enabled HandleExternalStorage. Then rebooted. Icons dissapeared.
I uninstalled a couple of apps that were on the SD and reinstalled. Rebooted. Still missing
Icons. Any help would be greatly appreciated. Thanks.
Volume wake
Please excuse my ignorance but how can one set wake on volume keys? Its a small detail that is driving me crazy.
Gapps for Cm11 pantech burst
Is there another link to Gapps for cm11 on pantech burst? the link at github si giving a 404 error. plzzz help
First I would love to say thanks to everyone who helped put this ROM together :good:
Second, I'm having a problem with my storage. When I go to apps, my internal storage and external SD storage got mixed up, now I can't download entering from the play store. Please help!!