[Q] Any stock recovery flashable full rom - Micromax A116

Hello friends, I wanted to ask , is there any full rom which can be flashed by stock recovery. bcoz a friend's A116 is not starting and is not on custom recovery. worse, the USB jack is also not working. but stock recovery is accessible. The phone is in bootloop while installing some fonts. Data wipe is not working.
Can we create some update zip like OTA and install??

shivrajsingh said:
Hello friends, I wanted to ask , is there any full rom which can be flashed by stock recovery. bcoz a friend's A116 is not starting and is not on custom recovery. but stock recovery is accessible. The phone is in bootloop while installing some fonts. Data wipe is not working.
Click to expand...
Click to collapse
nope u cant install /rom s in stock recovery
so u can use sp tools to flash a custom ROM u ll get al tht s needed frm the GENERAL SECTION
and thhn u can flash a custom ROM as u please :good:

jayadu said:
nope u cant install /rom s in stock recovery
so u can use sp tools to flash a custom ROM u ll get al tht s needed frm the GENERAL SECTION
and thhn u can flash a custom ROM as u please :good:
Click to expand...
Click to collapse
Sorry, forgot to mention that USB jack is not working. So we cant use SP tools.

shivrajsingh said:
Sorry, forgot to mention that USB jack is not working. So we cant use SP tools.
Click to expand...
Click to collapse
Wht do u mean by not working
Is the device being charged while plugging in?
If so thn the drivers wouldn't hav been installed properly
Just reinstall it Nd it should work
Sent from my Micromax A116 using XDA Premium 4 mobile app

jayadu said:
Wht do u mean by not working
Is the device being charged while plugging in?
If so thn the drivers wouldn't hav been installed properly
Just reinstall it Nd it should work
Sent from my Micromax A116 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
The drivers are installed properly. PC is detecting my A116 as mtk preloader in device manager, but my friends A116(bricked) is showing unknown usb device.

shivrajsingh said:
The drivers are installed properly. PC is detecting my A116 as mtk preloader in device manager, but my friends A116(bricked) is showing unknown usb device.
Click to expand...
Click to collapse
did u try it in factory mode??

jayadu said:
did u try it in factory mode??
Click to expand...
Click to collapse
Yes, it didnot help. I was wondering, xolo q1010 updated from 4.2 to 4.4 through flashable zip. Can't we create stock recovery based full rom? It will help many others also.

Related

HELP! Debugging can't work !

HELP! Debugging can't work !
yesterday i flash this rom. {rom}{6mp WORKING }XPERIA S ICS - CM9{17/8/12} {rom} http://forum.xda-developers.com/showthread.php?p=30192233&postcount=581
I flash the kernal , and flash the rom, It can been work ,
but when i want to flash back the official kernal and recovery back the rom
i fail to connect the debugging, the status bar has not the icon debugging ,,
What happen ?? somebody can help me ???
i am so urgent!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
pls help me
who can help me ?? pls , someone reply ...now i can't also recover ..
love9522 said:
who can help me ?? pls , someone reply ...now i can't also recover ..
Click to expand...
Click to collapse
Have you enabled USB debugging in "developer options" in setting?
jeetu1981 said:
Have you enabled USB debugging in "developer options" in setting?
Click to expand...
Click to collapse
yes , i has always on it...
same here with CM10 or Helly Bean
peter00007 said:
same here with CM10 or Helly Bean
Click to expand...
Click to collapse
then now how can i do ??cant flash back ??
love9522 said:
then now how can i do ??cant flash back ??
Click to expand...
Click to collapse
can you give us complete details on what happened?, after you flash the kernel, is the rom working after you flash?.
Kaito_Kuroba said:
can you give us complete details on what happened?, after you flash the kernel, is the rom working after you flash?.
Click to expand...
Click to collapse
i follow here, flash in kernal and rom, {rom}{6mp WORKING }XPERIA S ICS - CM9{17/8/12} {rom}
after that, the debugging cant working (at new rom, not original rom), so now i cant use the flashtools flash back the original kernal and recover back my original rom.
are you clear my trouble. thank you
love9522 said:
i follow here, flash in kernal and rom, {rom}{6mp WORKING }XPERIA S ICS - CM9{17/8/12} {rom}
after that, the debugging cant working (at new rom, not original rom), so now i cant use the flashtools flash back the original kernal and recover back my original rom.
are you clear my trouble. thank you
Click to expand...
Click to collapse
i know you are using Xperia ICS rom but what kernel you are on? if you are on FXP132 then flash CM9 rom and that should work fine...
http://uploaded.net/file/qk1zql7t/from/alzfhd
above link is for CM9
love9522 said:
HELP! Debugging can't work !
yesterday i flash this rom. {rom}{6mp WORKING }XPERIA S ICS - CM9{17/8/12} {rom} http://forum.xda-developers.com/showthread.php?p=30192233&postcount=581
I flash the kernal , and flash the rom, It can been work ,
but when i want to flash back the official kernal and recovery back the rom
i fail to connect the debugging, the status bar has not the icon debugging ,,
What happen ?? somebody can help me ???
i am so urgent!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
reinstall seus or pccompanion, then it will work.
Sent from my Desire HD using xda premium
reinstall seus or pccompanion, then it will work.
Sent from my Desire HD using xda premium
No friend, she can't reinstall using seus or pccompanion because she is using a custom kernel, she can't flashback to stock kernel.
Sent from my X10i using xda premium
Kaito_Kuroba said:
reinstall seus or pccompanion, then it will work.
Sent from my Desire HD using xda premium
No friend, she can't reinstall using seus or pccompanion because she is using a custom kernel, she can't flashback to stock kernel.
Sent from my X10i using xda premium
Click to expand...
Click to collapse
its to reinstall the drivers, i had same issue until i uninstalled seus and the reinstalled. im not talking about firmware.
Sent from my Desire HD using xda premium
udupa82 said:
i know you are using Xperia ICS rom but what kernel you are on? if you are on FXP132 then flash CM9 rom and that should work fine...
http://uploaded.net/file/qk1zql7t/from/alzfhd
above link is for CM9
Click to expand...
Click to collapse
i forgot i flash FXP 132 or 133..this attachment information
z28tovette said:
its to reinstall the drivers, i had same issue until i uninstalled seus and the reinstalled. im not talking about firmware.
Sent from my Desire HD using xda premium
Click to expand...
Click to collapse
i has try to change pc and pc companion, but same can't, still no debugging, and i open debugging in the develop option, like no open..over a period of time the debugging auto unclick..i duno what happen of this.. zz
if u can step by step teach me how to reinstall the drivers... thank you
Same usb debugging prob, with reddy's ics rom, fxp-133.
Hi there.
I m also having same problem, n still hanging on it.
Here, is what i had done,
Rooted my x10i 2.3.3
Flashed fxp-133 kernel given in dev thread of reddy using flashtool v9.0
Performed wipes using cwm recovery
Flashed Custom Rom> Flashed Stock Xperia GX ICS
Reboot
Flashed Addon pack in first post
It loaded well, i used Titanium to get all my data> successful
But then i opened settings>developer options> Android Debbuging (Ticked)> ADB over network (Ticked)
Connected to PC but only USB Storage was notified, no debugging happened.
NOW WHAT, I want to use Flashtools.
Can anyone help.. Thanks for Efforts.
Vipin_C said:
Hi there.
I m also having same problem, n still hanging on it.
Here, is what i had done,
Rooted my x10i 2.3.3
Flashed fxp-133 kernel given in dev thread of reddy using flashtool v9.0
Performed wipes using cwm recovery
Flashed Custom Rom> Flashed Stock Xperia GX ICS
Reboot
Flashed Addon pack in first post
It loaded well, i used Titanium to get all my data> successful
But then i opened settings>developer options> Android Debbuging (Ticked)> ADB over network (Ticked)
Connected to PC but only USB Storage was notified, no debugging happened.
NOW WHAT, I want to use Flashtools.
Can anyone help.. Thanks for Efforts.
Click to expand...
Click to collapse
Yes, this problem same as me ,, i hope the host can teach us to fixed it ,,thank
love9522 said:
Yes, this problem same as me ,, i hope the host can teach us to fixed it ,,thank
Click to expand...
Click to collapse
Try reflashing but do not use titanium backup,...
Sent from my Transformer TF101 using xda app-developers app
Mine in CM9 FXP135, i have this method that the USB Debugging also ON, so no need go to Settings>Developes>Tick Android Debugging....just try do nothing and just plug in USB
Hope Helps
Superman
How can i flash..?
udupa82 said:
Try reflashing but do not use titanium backup,...
Sent from my Transformer TF101 using xda app-developers app
Click to expand...
Click to collapse
How will i reflash, it itself needs debugging to connect (if i m not wrong).
if u know other methods please help..?
I m frustrated. No solutons.
Vipin_C said:
How will i reflash, it itself needs debugging to connect (if i m not wrong).
if u know other methods please help..?
I m frustrated. No solutons.
Click to expand...
Click to collapse
Try this:
Dont tick Android Debugging =)
Hope Helps
Superman

Installing Problem.....

I recently got a problem on my galaxy star. When i am installing any app my device freezes and then i have to remove the battery and restart my device. My device is rooted.
Plz help me...
Arghyadeep said:
I recently got a problem on my galaxy star. When i am installing any app my device freezes and then i have to remove the battery and restart my device. My device is rooted.
Plz help me...
Click to expand...
Click to collapse
Does it happen wid all apps all sme specific app... ?? and hw did u root ur device...??
MotoBorg said:
I have noticed on some other sites that people seem to say that a previous version of Kies may work. Does any one have access to previous versions.
One site suggested version 1.5.1.10056.
Click to expand...
Click to collapse
Just download the official firmware. & Flash it by odin.
Hope I helped.
Sent from my GT-S5282 using XDA Premium 4 mobile app
I got this problem when installing saveapk and then got the same problem when installing lucky patcher. But yesterday nothing happend when installing saveapk.
And i rooted with pre-rooted firmware about 15days ago and my device working fine except today.
Bro... just download the official firmware. & Flash it with odin
Sent from my GT-S5282 using XDA Premium 4 mobile app
Arghyadeep said:
I got this problem when installing saveapk and then got the same problem when installing lucky patcher. But yesterday nothing happend when installing saveapk.
And i rooted with pre-rooted firmware about 15days ago and my device working fine except today.
Click to expand...
Click to collapse
B4 installin official firmware try clearin cache and dalvik via recovery... if it doesn't wrk den try official firmware...
and another thing. ... root ur device using cwm recovery. .. coz even I had sme problems wid prerooted firmware....
Edit- hav u installed too many apps on ur phone...??
Ok. Can u tell me how do i install cwm recovery? Bcoz there is not any bug free cwm recovery.
Bro just dowmload mtkrecovery tools & clixk on restart then in recovery mode
Sent from my GT-S5282 using XDA Premium 4 mobile app
Arghyadeep said:
Ok. Can u tell me how do i install cwm recovery? Bcoz there is not any bug free cwm recovery.
Click to expand...
Click to collapse
flash prerooted custom deodexed rom on ur star...or u may resetur devi ce...it will start working fyn...

[q] micromax canvas magnuas a117

I was using the stock Rom on my phone when I enabled navigation bar using gravity box and rebooted and it never got ahead of the canvas Magnus boot animation ...I had been through this and I used to backup the Rom and then restore it... And it would get the job done .. But it didn't ... I tried just flashing Rom without data and everything... I even installed mini Rom which was on my phone but even it got bootloop...so I transferred the galaxy s4 Rom and thankfully it worked... Now should I try 'restoring the backup once more?? Please tell me what was the problem.. Thanks :good::good:
Bro if u want to install stock rom then install official rom link given on XDA and root official rom do not restore ur old backup ur backup is also damaged so again nd again you'll get boot loop
Sent from my A250 using XDA Premium 4 mobile app

[need help] soft brickd

Hello experts, i think its softbrick, i m using intex aqua i5 mini (i know its chinese) and i have changed bootanimation,and when i rebooted my device, the animation appeard bt i m not able to use my device. It stuck on sony erricson logo. Now plz tell me what can i do, 
My device is rooted, and i m on stock ROM. And phone is still in warranty.
I m able to get into recovery menu,but cant flash any update.zip file, bcoze my phone dosent have custom recovery, and whenever i tried to flash aroma file manager an error appear "installation aborted"
Cryin...crying...crying 
Plz help me out....
Sorry for my bad english......
Jamil69 said:
Hello experts, i think its softbrick, i m using intex aqua i5 mini (i know its chinese) and i have changed bootanimation,and when i rebooted my device, the animation appeard bt i m not able to use my device. It stuck on sony erricson logo. Now plz tell me what can i do, 
My device is rooted, and i m on stock ROM. And phone is still in warranty.
I m able to get into recovery menu,but cant flash any update.zip file, bcoze my phone dosent have custom recovery, and whenever i tried to flash aroma file manager an error appear "installation aborted"
Cryin...crying...crying 
Plz help me out....
Sorry for my bad english......
Click to expand...
Click to collapse
You'll have to factory reset using some leaked stock ROM for your phone off the internet. Data will be erased in the process. If you can still access your file system back up the stuff you don't want to lose. Go to this link http://androidxda.com/download-intex-stock-rom-models and find your phone model. Click the download button for it to get your stock ROM, then click the blue instructions hyperlink to read how to flash it. This will put your phone back to factory settings. Just an important thing to note, I have never tried those stock ROMS or the flash tool in the instructions so do this at your own risk.
Hmmm, thanx for your advice, i will try it tomorrow and let u know. Many thanx
Sent from my GT-I9500 using XDA Premium 4 mobile app
I have a nandroid backup in my sdcard, but i dont know how to flash it. Nandroid backup is in tar file formate.
Sent from my GT-I9500 using XDA Premium 4 mobile app
Jamil69 said:
I have a nandroid backup in my sdcard, but i dont know how to flash it. Nandroid backup is in tar file formate.
Sent from my GT-I9500 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
HOLD THE FACTORY RESET IDEA. I have found something that might help you restore your Nandroid backup. Unfortunately it involves using command prompt. This guide explains pretty clearly what to type and everything. If there is any part of this guide you don't understand, post a reply or send a message. http://www.modaco.com/topic/299479-howto-performing-a-nandroid-restore-manually-using-adb/. But before you do this you might want to follow this guide to know how to install the android debug bridge tools. http://www.howtogeek.com/125769/how-to-install-and-use-abd-the-android-debug-bridge-utility/
Thanx man, flashd the stock ROM, now everything is fine, thanx… thanx… thanx…
Sent from my Aqua i5 mini using XDA Premium 4 mobile app
I have also the same problem of bootloop .. I have karbon a1+ douple android 4.2.2 jelly bean . i have also download rom android xda and sp flash tool
How to install rom from recovery
Sent from my Karbonn A1+ Duple using xda app-developers app

update paranoid failed

Someone help me please.. ...
I have successfully installed zip files of paranoid and gapps too but when i reboot the system it doesnt start the O.S. its just showing the oneplus logo only.
The powered by android is not showing and system is not starting.
So someplease help me to get out of here.
shakya.shu said:
Someone help me please.. ...
I have successfully installed zip files of paranoid and gapps too but when i reboot the system it doesnt start the O.S. its just showing the oneplus logo only.
The powered by android is not showing and system is not starting.
So someplease help me to get out of here.
Click to expand...
Click to collapse
Can u access recovery?
If nope check the thread for mega unbrick
Sent from my ONE E1003 using Tapatalk
shubham399 said:
Can u access recovery?
If nope check the thread for mega unbrick
Sent from my ONE E1003 using Tapatalk
Click to expand...
Click to collapse
Yeah i can access recovery. ...bro
Nd oneplus logo is showing but nothing happen after it
shakya.shu said:
Yeah i can access recovery. ...bro
Nd oneplus logo is showing but nothing happen after it
Click to expand...
Click to collapse
Try flashing different rom then
Sent from my ONE E1003 using Tapatalk
Bro i tried but only paranoid rom has flashed properly.. ...
Other ones are failed to flash..
I really dont know wht to do.. .help me plzzz
shakya.shu said:
Bro i tried but only paranoid rom has flashed properly.. ...
Other ones are failed to flash..
I really dont know wht to do.. .help me plzzz
Click to expand...
Click to collapse
Are u using the lastest bootloader?
Flash lastest TWRP
Sent from my ONE E1003 using Tapatalk
Im using ver. 3.0.0
Nd i tried to flash 3.1 ver. It didnt flashed.. ..
lol
lol
lol
lol
lol
lol
shakya.shu said:
Im using ver. 3.0.0
Nd i tried to flash 3.1 ver. It didnt flashed.. ..
Click to expand...
Click to collapse
Flashed via Fastboot? Or via TWRP, "as image" , "recovery"?
What does "fastboot oem device-info" gives you?
Did you formatted all partitions ?
And do you have a Back up?
I dont have any backup.. ...
Nd how do i know that partition has deleted
shakya.shu said:
I dont have any backup.. ...
Nd how do i know that partition has deleted
Click to expand...
Click to collapse
When plugging to a computer and entering to the TWRP, it should mount in USB so you can copy your files (photos...).
Then, what about the other question about your bootloader and TWRP.
You can try to reflash on the version of PA that was here before the upgrade and see if it starts again...

Categories

Resources