please help me! I'm new here, so "A thousand pardons to you all for making myself such a headache to you all"... S3 won't boot, but it can go download, and recovery mode..
So here's the story, my dad told me to root his phone and make it overclock. First I rooted it using CF-Auto Root, and it worked really fne, no problems at all. Next, I searched the web, and came across the siyah kernel. I downloaded it's tar file form its site, which directed me to another site that lets me choose between the cwm flashable and the odin one which is the tar file.
After that, the screen flashes the model of the s3, then the logo of siyah, which is the freaky eye thingi. Then it would just go black, I waited 30 mins but nothing happened at all. Based on my research and gut feeling, it got bricked, or worse... HARD BRICKED!!! but I knew it wasn't hard bricked cause it could go download and recovery mode...Such a blessing..
I didn't want any trouble from my Dad, looking right at me with his bricked phone and me helplessly doing nothing, I tried stupid things like, somewhat stupid. Like searching for some random stock kernel (to replace Siyah) of s3 like the gt-i9300 xxx something with it's bootloader and then flashing it using odin pc and phone in download mode (cause I didn't know what to use but I'm very certain its GT-I9300). When I did that the logo of siyah kernel wasn't there anymore. But then again didn't boot...
PLEASE HELP!!! Excluding the method of USB jig, and bringing it to Samsung services.. Any help information about my current situation is really appreciated
More information:
Binary count is 4
CWM recovery enabled
Download recovery enabled
CF-Auto Root used to root
Siyah kernel was previous kernel, but replaced by kernel and bootloader I9300XXEMF1.tar
The last thing I did was to wipe cache partition and factory reset.
Current problem:
Won't boot
What I want to happen:
Bring back to its orginial state, without root, like I bought an S3
Again, it's an honor to be here at XDA Thank you all!
Late_Knight said:
please help me! I'm new here, so "A thousand pardons to you all for making myself such a headache to you all"... S3 won't boot, but it can go download, and recovery mode..
So here's the story, my dad told me to root his phone and make it overclock. First I rooted it using CF-Auto Root, and it worked really fne, no problems at all. Next, I searched the web, and came across the siyah kernel. I downloaded it's tar file form its site, which directed me to another site that lets me choose between the cwm flashable and the odin one which is the tar file.
After that, the screen flashes the model of the s3, then the logo of siyah, which is the freaky eye thingi. Then it would just go black, I waited 30 mins but nothing happened at all. Based on my research and gut feeling, it got bricked, or worse... HARD BRICKED!!! but I knew it wasn't hard bricked cause it could go download and recovery mode...Such a blessing..
I didn't want any trouble from my Dad, looking right at me with his bricked phone and me helplessly doing nothing, I tried stupid things like, somewhat stupid. Like searching for some random stock kernel (to replace Siyah) of s3 like the gt-i9300 xxx something with it's bootloader and then flashing it using odin pc and phone in download mode (cause I didn't know what to use but I'm very certain its GT-I9300). When I did that the logo of siyah kernel wasn't there anymore. But then again didn't boot...
PLEASE HELP!!! Excluding the method of USB jig, and bringing it to Samsung services.. Any help information about my current situation is really appreciated
More information:
Binary count is 4
CWM recovery enabled
Download recovery enabled
CF-Auto Root used to root
Siyah kernel was previous kernel, but replaced by kernel and bootloader I9300XXEMF1.tar
The last thing I did was to wipe cache partition and factory reset.
Current problem:
Won't boot
What I want to happen:
Bring back to its orginial state, without root, like I bought an S3
Again, it's an honor to be here at XDA Thank you all!
Click to expand...
Click to collapse
Download stock firmware from Sammobile >> http://www.sammobile.com/firmwares/1/ << and flash with Odin if you get bootloop after flashing reboot to recovery and wipe cache/factory data reset see if that works if not post your results here.
Related
Hello, sorry if this has already been answered but I did look around at similar scenarios and it seems to me that using odin to flash the stock kernel should fix it but on my device, however, it doesn't fix my problem. I beleive what I did was select update firmware from .zip in clockwork on accident. Idk if this is what you consider a "boot loop" because it doesnt restart it just sits there at the black galaxy s2 screen. Any insight would be great. I hate to have to buy a new one as it is quite alot of money. Like I said, sorry if this is already answered but after looking around for hours I still hve had no luck. Thanks in advance, Alex
Can you get into recovery (volume up+home+power) or download mode (volume down+home+power)?
I can get in to download and recovery mode both
The outlook is promising then. Without knowing what you've flashed, it's impossible to say what damage you've done, but if you don't mind losing your data, you can certainly get back to a working state by following [READ THIS] Got a Boot Loop? Don't post a New Thread!.
Before going down that route though, if you do want to keep your data, let us know what you flashed as it might be recoverable (maybe you just flashed the wrong kernel).
I can't say for sure what i flashed but I can say that i either flashed with an update or updated with a kernel??? sound right??? idk. the data isnt near as important to me as the 680 dollars my carrier will charge me for a new s2. Right now im using a junk alcatel tribe and im going through galaxy withdrawls.
Well before flashing anything else, make sure you definitely have an I9100, not some other variant (I notice you mentioned dollars). If you have a different model, you're in the wrong forums and might make things worse by following advice for the I9100.
I was pretty sure that it is the I9100 but i took the battery out and double checked. it IS the I9100
also for what it's worth when going into recovery(stock version) right after the text reading updating application it gives me an error in red. (E:install_application_for_customer:Can't unmount /preload copy application failed) and after the (Appling [yes it really spells it appling] Multi-CSC) it says Can't access to '/system/csc/TTT/system/'. However, the line after it says that it says Successfully applied multi-CSC
My first attempt to get back to a working phone without losing data would be to flash a stock kernel then, have you tried that?
Ok.. done.. but it still sits at the galaxy screen except now it has the triange due to the custom firmware
If that hasn't got you up and running then it's probably time to bite the bullet and follow the instructions from the boot loop thread linked above (which will also remove the triangle).
Maybe you can answer another question for me. When in recovery mode it says apply update from sdcard... why does it say that when it doesnt actually read from the sdcard? i have checked with the sdcard both in and out and the file directory in the recovery mode doesnt change. is it calling the usb storage an sd card?
ok when flashing a stock rom do i use the phone option in odin or the pda still
If you're flashing a stock rom from [ROM+Guide]Official i9100 Firmwares KG, KH1/2/3/4, KI1/2/3/4/8, KJ1/2 Download, then just follow the instructions from there (but usually PDA).
:'( Still wont boot.
What does happen, did any steps fail, any error messages?
Everything went smooth with no errors. No steps failed. Sitting at the boot screen is all it does though
Did you definitely wipe user data? (step 3). The final step of that thread is to try flashing a ROM which wipes, such as (non-stock) VillainROM 1.1.
well... yes i definitely wiped the user data and it was successfull when doing so. I didnt try the villian rom just because I thought that it was an optional thing but i will def. try it now that you bring it up. and hey, i really appreciate the help no matter what the outcome
(VillainROM 1.1 - XWKE7 base) I'm a UHKG7..... is this going to be a problem? just something i noticed and thought I would ask before going ahead
Hi all, I have been reading for an hour or so, searching here and google but I am a bit stuck.
Basically I was trying to install one of the 4.03 roms and I hit kernel panic, no problem I thought, I would just flash back to stock and go from there!.
The situation I am in now is that I only have access to download mode, which is recognised by odin, but it doesn't matter what I flash, I get the gs2 boot screen (no triangle) and then a black screen.
Download mode shows that my binary is samsung official, but I just cant get any room to boot passed the initial boot screen.
Anyone have any ideas what I can do? My phone is a UK unbranded i9100, on t-mobile network.
Originally I tried flashing the 4.03 rom through recovery, I can no longer access recovery.
Did you try to flash stock rom or cf root kernel? I saw here one guy from germany had same problem and he solved. If you have a look on Siyah kernel thread, he posted there a posts about this 2 days ago, you can check, you'll find it. Good luck
Thanks! Reinstalled CF-root and then another rom, all good!
Hello all,
I have tried many things before asking for help, but nothing worked so far.
Here is the story:
I was on ICS 4.0.4, with default ROM coming from carrier.
I wanted to install CM9.1,
spent countless hours doing all backup and reading tutorial.
Tried finally yesterday and it was stuck doing "wiping data". Left it for 20min+ and nothing.
After restarting it, it is now stuck on the boot logo.
I couldn't enter anymore CWM or stock recovery (up+home+power), but could enter Download mode.
So I tried a couple of things I have read on the forum, like installing Siyah-s2-v5.0.1.tar through Odin 3.04 but I still cannot enter recovery mode.
I've read (too late) about the mmc brick bug (couldn't find anyone speaking about it in any tutorial until I reached this point... nothing on CM wiki or in other tuto... classic!).
I hope I'm not in this case though as I can still go to DL mode, and the phones having the brick bug are completely dead (blank screen or no DL mode), as per http://forum.xda-developers.com/showthread.php?t=1756242
I managed to finally get CWM working only by using GT-I9100_ICS_ClockworkMod-Recovery_5.5.0.4.tar from Odin, then tried to install CM9.1 from SD card but after reboot it is stuck on the blue cyanogenmod animation boot screen and nothing happens.
Tried also to restore from CWM my nandroid backup, but during the restore it seems to hang then restart by itself, and then I'm back to Galaxy S boot logo (the animated one with the big S).
And after this I have lost again access to recovery mode.
I can't go back to stock and I can't install CM... I was not expecting such issues, it all seemed pretty basic on paper.
I'm really stressed and don't know what to do
Flash a stock rom in Odin (download mode), re-root your phone/flash a kernel with CWM, restore your backup ?
Hi,
thanks for answering,
I have tried to locate such a rom, but I'm not sure which one... is there a specific one to try ? could you point me to it please ?
so far I have tried I9100XXLPQ_I9100OXALPQ_I9100XXLPQ_HOME.tar.md5
but no luck
you also say "re-root", at the time I used this method:
[GUIDE] ROOT/UNROOT Stock ICS Firmware without flashing unsecure kernel - xda-developers
http://forum.xda-developers.com/showthread.php?t=1501719
Do I need root to install Siyah kernel from Odin ?
I'm trying one from sammobile... let's hope :/
The bad thing is I had no Yellow triangle at the beginning since I'm stuck in this boot loop or no boot to be precise.
Now that I have tried different things to fix it, it is still not working and I have my flash counter = 10.
I cannot even go back to the shop, is there a way to reset it knowing I cannot even reach the OS, I have only DL mode or CWM...
Use a stock rom for your region/carrier (or any stock rom from any region really), it doesn't really matter as I presume you'll be restoring a backup and/or going back to a custom rom anyway won't you ?
Samfirmware & AndroidFirmwares.net have lots of stock roms.
No, you don't need root to flash an Odin version of Siyah. So yes, you can flash that after you've got stock up & running to root your phone rather than re-rooting your phone by flashing a CFRoot kernel or using another root method. Just make sure the version of Siyah you're going to flash matches up with the stock rom you've got on (I.E if you flash a GB stock rom use GB Siyah, ICS stock = use ICS Siyah, etc, etc).
thank you again, I'm downloading the rom from sammobile matching my carrier,
Would you be so kind to send me a PM with your skype username or anything to "chat" with you ? I'm really worried and I spent all night already trying to fix it with no progress at all
Don't worry about the flash counter. That's the least of your problems while your phone is borked Worry about it when it's fixed. There's nothing you can do about the triangle while your phone is cactus.
When you've got it up & running again, use Triangle Away.
But first things first.
---------- Post added at 04:02 AM ---------- Previous post was at 03:59 AM ----------
You're welcome.
Um, no. Absolutely not. Nothing personal, but if I did that for every person who's asked me for 'hands on' help since I've been here, I'd have spent my time doing nothing else. I don't do 'personal' with people from XDA (which is why I have PM's blocked except for mods).
Besides, you're going to learn much more fixing this yourself. I've given you a stack of information thus far, ball is in your court. Every answer to every question you could possibly ask is on this site. It just sometimes takes a bit of work/reading on your part to find it.
megosu said:
thank you again, I'm downloading the rom from sammobile matching my carrier,
Would you be so kind to send me a PM with your skype username or anything to "chat" with you ? I'm really worried and I spent all night already trying to fix it with no progress at all
Click to expand...
Click to collapse
ok I understand.. it is just I have literally spent more than 8 hours on it and had not make any progress at all (even worse I cannot return it to the shop because of the yellow triangle).
I appreciate your help, it gives me a bit of hope but I'm in a very bad situation and I feel I have read and do so much already with no success at all.
I will try your option of restoring the one from Sammobile, I have tried other before without any luck, maybe this one will do... (5min left to DL it).
thanks again for your support
I know where you're coming from. The first flash I tried when I got my phone in 2011 borked because I was careless, and it took me a bit over a day to get the right info/files/etc to get it fixed. I know it's frustrating/tiring/annoying & you're wondering at the start whether you can even fix it. But as long as you've got download mode 99 times out of 100 you can save it.
And as I said, it's good experience; once you've fixed it, you'll be able to handle anything that comes up in future
Let us know how you go. I'm going to bed shortly, but I'm sure someone else will step up & help if you have any further problems.
You're welcome Happy to point you in the right direction.
I have flashed the rom, the exact same one as I had before everything happened...
if it helps, I flashed it from Odin 3.04 as PDA.
I9100BVLPH_I9100TMULPH_I9100BVLPE_HOME.tar.md5
I'm now back to the Samsung GALAXY S2 GT-I9100 logo and nothing happens.
I cannot use recovery mode,
I can use DL mode (it shows 11 counts and current binary as Samsung official.)
update:
I left the phone on the first logo for about 5min and it moved to the next Samsung Galaxy S2 logo, with the big animated S.
I'm waiting but nothing else is happening.
I'm still desperate to fix it.
One thing which can be relevant, whenever I try to wipe or format /data from CWM, my phone is restarting after a few minutes or is saying it cannot be done.
I can format /cache and /system.
Could it be the root cause ? Any way of fixing it ?
Thank you
update: I cannot mount /data from CWM, it says Error mounting /data!
is it the brick bug ? :|
Easy now....your device is still good.
Those animations should take like 1-2 mins when you flash a rom.
Now, you are completly sure that you are actually flashing the right ROM for your device model?
If so, just keep flashing stock roms until you're up and running again, so you can start from scrap.
I tried, the issue is as soon as I flash a stock rom (through Odin), then I can't get into stock recovery mode anymore, I have to flash GT-I9100_ICS_ClockworkMod-Recovery_5.5.0.4.tar to get back the recovery mode.
I tried to flash several times, I think it is down to the fact I cannot mount or format /data.
Which is why I'm wondering if it is the famous brick bug.
My device is GT-I9100 and I took the stock rom from sammobile:
I9100BVLPH_I9100TMULPH_I9100BVLPE_HOME.tar.md5 which is ICS 4.0.4 (that I had before trying to move to CM9.1 and having all this mess in my hands.)
flash this:
http://www.sammobile.com/2012/11/15/i9100xxlsj-%E2%80%93-galaxy-s-ii-android-4-1-2-jelly-bean-test-firmware/.
you are on siyah kernel right?
what you wanna do know is to get to whatever rom your flashing, forget about cmw for now.
this also might help:
http://forum.xda-developers.com/showthread.php?t=1457458
So it is not lost yet ? Not the brick bug ?
just to be sure:
you want me to install through Odin: Siyah-s2-v5.0.1-CWM.zip
then going back to DL mode
I flash through Odin: I9100XXLSJ_I9100OXXLS1_OXX.zip (coming from your link).
anything I'm missing (even if it seems obvious, please let me know as I'm maybe missing something important)
?
I still cannot do Factory reset... is it a problem ?
I dunno what kernel you are using, If stock 4.0.4 kernel you should flash siyah first (safe kernel, no brick bug), and then countinue flashing the ROM. Check out the brick bug thread in general SII forum for directions if you want.
BTW, Odin recognizes your phone right? Check it out, you'll get a huge long breath.
BTW 2: you don't have any kies applications running in your pc.....am I right? if so, CLOSE THEM ALL!
I did had stock 4.0.4 kernel when I first tried to follow CM9.1 wiki, and I did a factory reset through CWM... which is why I think I might have bricked it...
I have checked the brick bug thread (too late it seems...) but so far I can't be sure if I'm in this case or not as they say they can't even reach DL mode, and I can.
Odin recognizes my phone, yes, but anything I flash is stuck on the animated logo.
I do not have Kies installed, just installed the drivers.
Not my first time to root and install a custom rom on other phone, but this phone isn't treating me well.
So I followed the root guides to root the phone.
Downloaded an insecure kernel for i9100. Although, oddly enough, I bought this phone 2nd hand, and when I went to the "about" part for the kernel look up before tried to root it, the kernel info just contained ICS3.?? (forgot) and the date. There was no four or five letter kernel code like I've been seeing. But according to cnet (one of many rooting tutorials), the kernel version doesn't matter as you can change the kernel anytime, or after rooting in this case.
So I installed Kies to get the Samsung drivers installed. Done.
Restarted phone to download mode (volume down, home, power)
Started Odin 3 v1.83
Phone was recognized. Click the 2 boxes (Auto reboot and F. Rest Time).
Clicked PDA, loaded up an insecure kernel.
Status went through OK, ended up with "Pass!"
Phone automatically restarted.
Now the problem. It restarts, shows the Samsung Galaxy S2 logo with the big triangle underneath it, and thats it. Never leaves this screen. I thought maybe it's a kernel problem, so I tried several different insecure kernels, all with no change. I have no idea how to find what kernel was the original one that came with this phone. Would using Odin with the original secure kernel (or even insecure) solve this problem? Otherwise, what else can I do? My note 2 was stolen so I bought this s2 second hand until I can scrape up enough money for a note 2 again, but the damn thing won't even boot up now. :crying:
How can I get this working again, even to have it stock again I'd be fine (though obviously putting on a custom room with root would be best).
Well you dont seem to mention what you have tried after flashing your kernel?
Have you tried going into download or recovery mode, do they work? If so simply flash another kernel or rom.
Also, I my be wrong but there isnt a China i9100 afaik so you may have flashed incorrect kernel so system isnt booting.
Remove battery and tell/show us what label says.
TheATHEiST said:
Well you dont seem to mention what you have tried after flashing your kernel?
Have you tried going into download or recovery mode, do they work? If so simply flash another kernel or rom.
Also, I my be wrong but there isnt a China i9100 afaik so you may have flashed incorrect kernel so system isnt booting.
Remove battery and tell/show us what label says.
Click to expand...
Click to collapse
There wasn't much to try, at least as far as my noob self knows about. I tried flashing 6 other kernels I found, merely taking guesses at which might possibly be the Chinese s2 one, I remember from flashing other phones that i had to look for Z or D in the kernel ID. But all of them just led to the same problem of not booting past the logo screen.
Besides just trying to start it up as normal (which doesn't work) and starting it up in download (by holding down vol+home+power), what others ways can I start it up? I don't know how to boot into recovery, and I didn't know I can flash a rom without first rooting it, which I haven't done yet because it's still stuck in start-up.
Searching enough xda threads and just googling seems show a pretty large consensus supporting the existance of a China i9100, plus I see them everywhere (as well as s3, s4, and notes), so I'm 99% sure they are an official and semi-large market for them here (after iPhones unfortunately). But even still, that doesn't help me locate the original kernel.
Under the battery, is says this:
Samsung WCDMA
Model #: GT-I9100
CMIIT ID: 2011CP2751
Do these help? So is any of the steps I did wrong, or can you otherwise point me in the right direction? Appreciate the help.
Don't post your IMEI (or your SN for that matter).
MistahBungle said:
Don't post your IMEI (or your SN for that matter).
Click to expand...
Click to collapse
Thanks for the tip MistahBungle. Edited out.
Hate to say it, but found more help on youtube... Found a guide that walked me through replacing all the files (not just kernel) in Odin that got it back up and running. I'll follow the xda guides again and hopefully it'll work this time... Thanks anyways...
I'm trying to get the user files off a phone with corrupted cache. When booted normally, it gets stuck on the white T-Mobile splash screen. When booting into recovery, I get an error about the cache and the phone restarts without loading into recovery. Screenshots attached.
I can get into download mode fine.
Using Odin to flash a custom recovery gives me the PASS message, but when I restart the phone, the stock recovery is still there with the same error message. I've tried TWRP and CWM.
I am hesitant to try flashing a custom ROM because I don't want to lose the data. The phone is not important, but the data is.
firstrival said:
I'm trying to get the user files off a phone with corrupted cache. When booted normally, it gets stuck on the white T-Mobile splash screen. When booting into recovery, I get an error about the cache and the phone restarts without loading into recovery. Screenshots attached.
I can get into download mode fine.
Using Odin to flash a custom recovery gives me the PASS message, but when I restart the phone, the stock recovery is still there with the same error message. I've tried TWRP and CWM.
I am hesitant to try flashing a custom ROM because I don't want to lose the data. The phone is not important, but the data is.
Click to expand...
Click to collapse
Dont try flashing a custom ROM on to the phone. Try flash the stock ROM through the lastest odin with the lastest drivers and let me know how that works out for ya. Unless that wipes the phone ( havent used it in quite some time) then I have no idea man.
I tried flashing the T399UVUAMJ4 ROM throught Odin. It went through the entire process and rebooted, but nothing changed. Does this mean the bootloader is locked?
firstrival said:
I tried flashing the T399UVUAMJ4 ROM throught Odin. It went through the entire process and rebooted, but nothing changed. Does this mean the bootloader is locked?
Click to expand...
Click to collapse
I'm not sure maybe want to ask someone else I'm not as experienced as some people on here. Sorry man goodluck
I hope someone can help you out. I would say your cache partition somehow got renamed but I'm not sure if thats possible and if so how to fix it. Maybe someone with ADB knowledge can help?
Also what TWRP were you trying to install? I've had problems when I tried to flash older versions
okay so here is a site with the original firmware for the phone. It has both the t399 and the t399n for odin. It has them labeled so its not too confusing lol. http://forum.gsmhosting.com/vbb/f200/samsung-t399n-metro-pcs-firmware-here-1899016/
find the one for the t399, flash it with odin. this will fully restore your phone. HOPEFULLY it will be able to save the data. I know you said you did this before but I'm not sure if it was just system or everything like here.
kireflow90 said:
okay so here is a site with the original firmware for the phone. It has both the t399 and the t399n for odin. It has them labeled so its not too confusing lol. http://forum.gsmhosting.com/vbb/f200/samsung-t399n-metro-pcs-firmware-here-1899016/
find the one for the t399, flash it with odin. this will fully restore your phone. HOPEFULLY it will be able to save the data. I know you said you did this before but I'm not sure if it was just system or everything like here.
Click to expand...
Click to collapse
So I tried the T399 files. Flashed with no errors, but when it reboots everything is still the same. I've even tried flashing from another computer. Mind boggling!
firstrival said:
So I tried the T399 files. Flashed with no errors, but when it reboots everything is still the same. I've even tried flashing from another computer. Mind boggling!
Click to expand...
Click to collapse
Thanks for the quick reply. Its a shame to hear that it didn't work
How did you come to this? as to me it seems the partions have be modified hence why giving those errors I seen similar errors to when users change cache sizes which tends to brick device or from using incorrect pit files.
You never be able to recover data from flashing Odin may be slim chance by custom Rom thru recovery if was a bkup of original system and not selecting data your old data may conflict causing either bootloop or basically stuck on splash screen.
If you was ever able to best way to pull data from device would be thru adb may have a chance.
This phone belongs to a friend of a friend. They said they brought it to T-Mo because it hung up during boot. The store worked on it for a few minutes, but couldn't get it to boot up either. When I tried to go into recovery, they said the store already went into that screen too. They have since bought a new phone, but would like to get the photos off it if possible. They never had an SD card so it's still on the device.
At the moment, I can just go into download mode. I was hoping to flash a custom recovery so I might possibly be able to ADB from there since it won't load the stock recovery.
I have a very similar issue but without "cache error messages". The phone (Samsung Galaxy Light with stock ROM and TWRP) just reboots no matter what I try to flash into it.
It does it while "drawing" the Samsung Logo animation (blue ring that gets created revealing the word samsung), so after the white wrintings of the phone name.
My attempts so far:
1. Flashed newer version of TWRP
2. Flashed CWM
3. Flashed two different versions of stock ROM (the original one and the one that T-Mobile released when upgraded to latest jelly Bean)
4. Flashed a custom ROM (Light ROM found here which is based on the stock one).
EVERY TIME the outcome was the same:
Phone reboots right after the phone name (written in white) while the Samsung animation starts. It just stops while the blue oval begins to appear. If I try to boot into recovery (via home/power/volume up combo) it shows the TWRP splash screen but it reboots right after and this happened even after I flashed (successfully according to Odin) CWM.
It really looks like I did nothing so far but I can assure it's not the first time I use Odin (4 different versions) to flash a custom recovery or a ROM. I did it successfully on other 4 different phones (all samsung).
On this same phone I did it the first time when flashed TWRP in order to root it via recovery.
I have no idea what to do next. I was thinking about using adb in order to wipe all the caches (dalvik included) but it looks like the phone can't be recognized unless I boot it into recovery mode (adb get-state returns "unknown") and I don't think I can do anything in Download mode which is the only mode I can enter apparently.
I was hoping someone here can help me to spare some money buying a new phone for my wife and tossing this one which is the best for its small size imho.
Thank you in advance to anyone interested in at least shading some light on what could have happened. This started to happen out of the blue and the last time I actively modified something (updating the recovery) was almost one year ago... It always worked like a charm until 4 days ago...
EDIT: To clarify: the reason why I posted here is because this looked like a problem the most similar to mine (boot loop or stuck at boot and can't enter either regular or recovery mode). I cannot create new posts due to my low "rank" yet... Please feel free to move this if you think it belongs to a separate thread.
fulgorevinnie said:
I have a very similar issue but without "cache error messages". The phone (Samsung Galaxy Light with stock ROM and TWRP) just reboots no matter what I try to flash into it.
It does it while "drawing" the Samsung Logo animation (blue ring that gets created revealing the word samsung), so after the white wrintings of the phone name.
My attempts so far:
1. Flashed newer version of TWRP
2. Flashed CWM
3. Flashed two different versions of stock ROM (the original one and the one that T-Mobile released when upgraded to latest jelly Bean)
4. Flashed a custom ROM (Light ROM found here which is based on the stock one).
EVERY TIME the outcome was the same:
Phone reboots right after the phone name (written in white) while the Samsung animation starts. It just stops while the blue oval begins to appear. If I try to boot into recovery (via home/power/volume up combo) it shows the TWRP splash screen but it reboots right after and this happened even after I flashed (successfully according to Odin) CWM.
It really looks like I did nothing so far but I can assure it's not the first time I use Odin (4 different versions) to flash a custom recovery or a ROM. I did it successfully on other 4 different phones (all samsung).
On this same phone I did it the first time when flashed TWRP in order to root it via recovery.
I have no idea what to do next. I was thinking about using adb in order to wipe all the caches (dalvik included) but it looks like the phone can't be recognized unless I boot it into recovery mode (adb get-state returns "unknown") and I don't think I can do anything in Download mode which is the only mode I can enter apparently.
I was hoping someone here can help me to spare some money buying a new phone for my wife and tossing this one which is the best for its small size imho.
Thank you in advance to anyone interested in at least shading some light on what could have happened. This started to happen out of the blue and the last time I actively modified something (updating the recovery) was almost one year ago... It always worked like a charm until 4 days ago...
EDIT: To clarify: the reason why I posted here is because this looked like a problem the most similar to mine (boot loop or stuck at boot and can't enter either regular or recovery mode). I cannot create new posts due to my low "rank" yet... Please feel free to move this if you think it belongs to a separate thread.
Click to expand...
Click to collapse
ok so i read all that you have done which is basically everything i would of suggested to you other then could it be the battery may be faulty just random thought noticed you never mentioned trying kies you may have a chance with it beening detected as i see you can enter download mode so that help with odin also kies also have you tried firmware from here sam mobile here T399 or T399N OH2 lastest for tmo and OH3 for metro.
Try to only flash that thru odin i use 3.07 or 3.09 only difference is the pda button changes to AP .works perfect for me so i suggest it then returning back to stock recovery/firmware if it boots then awesome. then return to TWRP 2.8.4.0 beening lastest for this device also needed for CM12 also my projects for device current and future.
when using odin make sure that only “Auto Reboot” and “F. Reset Time” options are selected.
also just note when going into twrp release buttons as soon as you see logo otherwise it will continue to boot thru well happens to me when daydreaming lol.
also if your seeing this adb get-state returns "unknown" i believe installing kies may install the drivers for detection im not postive on that but im sure it something to do with missing the adb driver for device maybe another dev can confirm this ?
hopefully this may be of some help i keep on thread to see how the outcome goes
Thanks for the reply DJBoxer!
Regarding the battery it's a new one and I can confirm it's not a battery problem considering that the phone can stay in download mode and unplugged from any power source for very long times without turning off/rebooting and it never failed to keep the charge so far. I also tried with the old battery and the phone behaves exactly the same way.
I used 3 different versions of Odin (1.87, 3.07 and 3.09) with only “Auto Reboot” and “F. Reset Time” options selected and every time I got the PASS message even though the phone keeps rebooting after the first reboot once the procedure is terminated.
To clarify one thing : when I said "it shows the TWRP splash screen but it reboots right after and this happened even after I flashed CWM" I meant to point out that it looks odd to see the TWRP splash screen (even for just a few seconds) after I just flashed CWM and that makes me think that I'm really not flashing anything here...
Thank you very much for taking the time of posting the links and I actually didn't try with that latest OH2 version.
I am downloading it right now (it takes a while from sammobile) and I will keep you posted on the outcome.
I will try to flash it via Odin and I'll also try the latest version mentioned on sammobile (Odin3_v3.10.7).
Regarding Kies I wasn't able to have it recognize the phone. I may be missing something but I tried updating drivers and going through all the guided procedures with no luck... If you say it should recognize the phone right away while in download mode then something is amiss.
Could you please confirm that I should also be able to use adb commands with the phone connected via USB in download mode? Cause that doesn't look like the case either...
Thank you again and I'll give updates here about my last attempts.
Sorry for the late reply...
Nothing changed by the way...
I am about to send the phone back to the seller who told me they'll try to fix it. Let's see how it goes.