just got exynos version of SM T705, rooted, busybox (stericsson) installed
viper4android doesn't work,
installed, granted root permission, when comes to installing drivers, it says something like wrong version of busybox.... check if fully rooted.
fyi i rooted this device with cf-autoroot, installed TWRP, checked with root checker, says my device is fully rooted.
anyone tried this app?
apparently some kind of driver issue and one guy says a method solves it but looks like thread died. here is the thread
fletch33 said:
apparently some kind of driver issue and one guy says a method solves it but looks like thread died. here is the thread
Click to expand...
Click to collapse
the guide you posted is the solution !
thanks dude !
Hello guys, I try to get it on Lollipop. Have someone been on test of stuff from that thread please ?
http://forum.xda-developers.com/galaxy-s6-edge/themes-apps/viper4android-s6-edge-root-t3072183
I pass the installation, but nothing happens. Strange syndromes: Google Music Play says "Nothing to play", the system player says about not supported mp3 files as well
Cheers,
Marek
This is the right thread for Tab s: http://forum.xda-developers.com/galaxy-tab-s/general/how-to-installing-viper4android-v4a-t3136025
Best, maris
Removed
maris__ said:
This is the right thread for Tab s: http://forum.xda-developers.com/galaxy-tab-s/general/how-to-installing-viper4android-v4a-t3136025
Best, maris
Click to expand...
Click to collapse
Thanks I go for ODIN with LP for the next try. Thanks for that. :good:
tukulll said:
just got exynos version of SM T705, rooted, busybox (stericsson) installed
viper4android doesn't work,
installed, granted root permission, when comes to installing drivers, it says something like wrong version of busybox.... check if fully rooted.
fyi i rooted this device with cf-autoroot, installed TWRP, checked with root checker, says my device is fully rooted.
anyone tried this app?
Click to expand...
Click to collapse
Flash skyhigh kernel its permissive v4android will work
b3ltazar said:
Flash skyhigh kernel its permissive v4android will work
Click to expand...
Click to collapse
I am on stock. you dont need any special kernel.
As I know, Busybox is essential.
Good luck
marekjs said:
I am on stock. you dont need any special kernel.
As I know, Busybox is essential.
Good luck
Click to expand...
Click to collapse
For v4a and lolliop you will need a permissive kernel or the supersu policy in the general section otherwise it will not work.
Yea...on Lollipop you need a permisive kernel. Inhave Note Edge and Note 12.2 and Note 2014 10.1. .so I keep up with a lot. There is a fix though! Dr. Keten Viper Fix ...before I had found a permissive kernel I had the same problem, also my wife has the Note 4 stock rooted with LOLLIPOP... which I have rooted for her, she will not let me put a custom ROM on her phone so the stock rom does not have the permissive edits as well... this one app, fixed that problem with the lollipop kernel issues! You still need root and busybox, but it does work! Viper is essential!
---------- Post added at 03:39 AM ---------- Previous post was at 03:38 AM ----------
Dr. Keten Viper Fix .....its an apk that you install. .run it and reboot....Poof. thats it
I would add a link but have to read how to 1st... I will after work
---------- Post added at 05:38 PM ---------- Previous post was at 05:26 PM ----------
https://mega.nz/#!HYBDmKwD!qIvAxaNEvPf2tHvEVXm4X3fUNUsj3a36TTea60JdMXg
Related
Systemless Root
Read this first: http://forum.xda-developers.com/showpost.php?p=63197935&postcount=2
To summarize:
This is an experimental root process
[*]It needs an unlocked bootloader
[*]It needs the system to have no trace of any other superuser solutions
[*]This will patch the kernel RAMDisk to include the su binary
[*]Following that, all calls to execute commands as root will be handled from here
[*]This means no system partition modification
[*]This also means Android Pay works
[*]Since this is experimental, expect apps with hardcoded su calls to not work (blame the app developer)
[*]Also, there are bugs as Chainfire stated but it's been stable up until now
[*]I have not tried this on the XT1572 but it should work
Click to expand...
Click to collapse
IMPORTANT!
You need to revert to completely stock/clean marshmallow without any SuperSU installed.
Installation Instructions:
Install the kernel patch - systemless_root.zip
Install SuperSU (systemless) - SuperSU v2.56
DO NOT INSTALL ANY OTHER SUPERSU MODULES
IGNORE ANY TWRP MESSAGES ABOUT SUPERSU or SU in general
XDA:DevDB Information
[Beta][Marshmallow/6.0][XT1575/1572] Systemless Root, Tool/Utility for the Moto X Style (Pure)
Contributors
alnikki25k
Version Information
Status: Testing
Current Beta Version: 1
Beta Release Date: 2015-12-04
Created 2015-12-04
Last Updated 2015-12-23
Reserved
Reserved
Aaaand....ignore this post.
XDA discourages place holder threads. Without a download link, this will probably be shut down pretty soon.
Sent from my XT1575 using Tapatalk
Yeah...really should tidy up your instructions. Tons of stuff to wade through in that link thread. No "clark" for our phone. Also, a layman's, two-sentence overview of what this is and does may be helpful to many. Thanks!
joshw0000 said:
XDA discourages place holder threads. Without a download link, this will probably be shut down pretty soon.
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
And I definitely jumped to a conclusion I shouldn't have.
brholt6 said:
Will there be a download in this thread (curious because I don't see a .zip for our phone in the linked thread) or just a link to @Chainfire's thread?
Click to expand...
Click to collapse
joshw0000 said:
XDA discourages place holder threads. Without a download link, this will probably be shut down pretty soon.
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
hijax2001 said:
Yeah...really should tidy up your instructions. Tons of stuff to wade through in that link thread. No "clark" for our phone. Also, a layman's, two-sentence overview of what this is and does may be helpful to many. Thanks!
Click to expand...
Click to collapse
brholt6 said:
I'd say especially when you list yourself as the only contributor and just link to someone else's work. Who knows, maybe he created the .zip we need for the 1575/1572 and he's uploading it now? I suppose I shouldn't jump to conclusions.
Click to expand...
Click to collapse
Wow. Aren't you guys all respectful? This is a DevDB thread. The link was up in the Downloads section. For some reason my post edits/links didn't go through. Maybe check once before you fire all guns?
alnikki25k said:
Wow. Aren't you guys all respectful? This is a DevDB thread. The link is up in the Downloads section. For some reason my post edits didn't go through. Maybe check once before you fire all guns?
Click to expand...
Click to collapse
Apologies...as you know, many people try to get credit for work they didn't do (I'm obviously not a fan of that and let it get the best of me). It just looked odd since there was only a link to the original thread until just now. Again, apologies for jumping to conclusions and thanks for the work.
I couldn't find any info anywhere how does systemless root benefit vs regular root by using the modified boot image? thanks!
brholt6 said:
Apologies...as you know, many people try to get credit for work they didn't do (I'm obviously not a fan of that and let it get the best of me). It just looked odd since there was only a link to the original thread until just now. Again, apologies for jumping to conclusions and thanks for the work.
Click to expand...
Click to collapse
Yeah. I get that. Don't worry about it.
alnikki25k said:
Wow. Aren't you guys all respectful? This is a DevDB thread. The link was up in the Downloads section. For some reason my post edits/links didn't go through. Maybe check once before you fire all guns?
Click to expand...
Click to collapse
Sorry about that. I saw [WIP] as the thread title and no download links in the OP and assumed this was another "I'm first to start working on it but have nothing to share" thread that pop up all over XDA and immediately get closed.
patt2k said:
I couldn't find any info anywhere how does systemless root benefit vs regular root by using the modified boot image? thanks!
Click to expand...
Click to collapse
From what I understand it allows you to root your phone without making any modifications to /system. So when a OTA is released you flash the stock kernel and accept the OTA. This assumes you've made no changes to /system once you gained root.
Sent from my XT1575 using Tapatalk
It's working great, I had to reinstall superSU from the play store as it was not showing up in the app drawer. Everything is working.
@alnikki25k BTW. Congratulation on the brilliant idea and implementation of a script that make the systemless root changes to the kernel, could this be used with another device?
Can I use this with the stock odexed (unrooted) from here:
http://forum.xda-developers.com/mot...rom-stock-rooted-debloated-x1575-6-0-t3262242
Thanks, great work!
Note 3 Chicago said:
Can I use this with the stock odexed (unrooted) from here:
http://forum.xda-developers.com/mot...rom-stock-rooted-debloated-x1575-6-0-t3262242
Click to expand...
Click to collapse
That's my question too.. Downloading the stock no root version.. Hoping for the best
---------- Post added at 02:45 PM ---------- Previous post was at 01:46 PM ----------
Note 3 Chicago said:
Can I use this with the stock odexed (unrooted) from here:
http://forum.xda-developers.com/mot...rom-stock-rooted-debloated-x1575-6-0-t3262242
Click to expand...
Click to collapse
worked so far.. flashed the stock odexed no root. rebooted and did quick gmail setup. Went back to TWRP and flashed the files for the kernel and SuperSU. When prompted by TWRP to install SuperSU after flashing the files I said do not install per instructions. Booted up and restoring with titanium as I type.
Next question would be if anyone was able to get xposed working with systemless root? Probably not going to take that plunge since I got root mainly for titanium and ad blocker.
Edit. All apps back. Running good. Not trying xposed yet. Android pay loaded no problem. Added cards no problem. Doing good so far
Tested on XT1572 , everything works flawlessly except es file explorer unable to request for su permission for some reason.
Thanks again for this
bgos10 said:
Tested on XT1572 , everything works flawlessly except es file explorer unable to request for su permission for some reason.
Thanks again for this
Click to expand...
Click to collapse
Yep, ES Explorer does not work with systemless root, change to Solid Explorer that works well.
Thanks for this, now I have android Pay working properly.
BTW: good ole root explorer still works.
wctaylor79 said:
Next question would be if anyone was able to get xposed working with systemless root? Probably not going to take that plunge since I got root mainly for titanium and ad blocker.
Edit. All apps back. Running good. Not trying xposed yet. Android pay loaded no problem. Added cards no problem. Doing good so far
Click to expand...
Click to collapse
Xposed working fine on Moto X XT1572 Indian Version
Heavily debloated June patch DEODEXED Nougat ROM for SM-G920F/I only.
Alpha testing done -> Beta testing done.:
https://t.me/joinchat/AAAAAEE0OTF3tCPa_lpEMw
There won't be much info here yet. If it turns out to be working, then this post will be updated.
I've been running this ROM for 2 days straight, and have 0 issues. I started to make this ROM for my self, but decided to share it anyways.
Feel free to test it out, just be aware, that your favorite apk most likely didn't make the debloat-cut. That said, the footprint of the rom, is around 1G.
I take no responsibility, if you decide to flash this.
#BUGS#
Aroma can sometimes stop in the extracting process.
Just reboot, and try again, then all is fine.
Please report back here or in the group.
Rom:
https://mega.nz/#!KV8jmSAB!3YM1QVgpwVDcO0pPY2Sd-Y2tMthYPin8P49QHuQrfm8
Feel free to use Aria's add-on zip, if you need some of the apks back, that didn't make the debloat-cut.
Credits:
Aria97
Noxxx
Reserved 1
Might need this one also...
Look that without a download link this thread will be closed
erghetto said:
Look that without a download link this thread will be closed
Click to expand...
Click to collapse
Thanks for your concern, but no rules have been broken.
According forum rule #11, it's ok.
It's always great to see new roms,I really don't like all these mods and ports and what not and have always preferred debloated roms so thanks for building this, il be giving this rom a go once I've backed things up.
Hi there! Is this rom rooted? Can pokemon go and such apps been played? Thanks!!!
paco8784 said:
Hi there! Is this rom rooted? Can pokemon go and such apps been played? Thanks!!!
Click to expand...
Click to collapse
The ROM is rooted with magisk V12.
The rest is up to you ?
Rom is very fast and clean they don't have any ****ty apps and everything ;p on battery I have 2 days with hard/medium usage ^^ they sleep as baby
Its for the 920 but with other kernel perhaps also for 925?
editkay just flashed clean rom with noxx kernel and it works great
I've been very interrested for this extremly to the bone debloated Rom.
Is it possible to release here this Rom nearly?
Greetz
is it possible to install tts
tester
hi i got a g920i may i test the rom ?
ruud said:
is it possible to install tts
Click to expand...
Click to collapse
All up to you.
xnakeg said:
hi i got a g920i may i test the rom ?
Click to expand...
Click to collapse
Yes you can.
Doesn't work on 920t, well everything but the sim does
grandamle91 said:
Doesn't work on 920t, well everything but the sim does
Click to expand...
Click to collapse
Isn't supposed to ?.
You should read OP, before flashing the ROM.
didn't say it was but this is the only rom i had that didnt
how to install
hi, i already download this rom and i'm commited to be a tester. Can you give me the right steps in order to have a succesful instalation?
---------- Post added at 08:51 PM ---------- Previous post was at 08:45 PM ----------
xnakeg said:
hi i got a g920i may i test the rom ?
Click to expand...
Click to collapse
how you installed this rom?
Stevie1997 said:
hi, i already download this rom and i'm commited to be a tester. Can you give me the right steps in order to have a succesful instalation?
---------- Post added at 08:51 PM ---------- Previous post was at 08:45 PM ----------
how you installed this rom?
Click to expand...
Click to collapse
go to recovery ,-- wipe-- advanced wipe , check all except internal storage
flash rom and magisk and done ! i use the s7 edge battery so i have to flash an aditional kernel to work
https://forum.xda-developers.com/android/software/app-dolby-atmos-axon-7-oreo-port-t3740508
Sadly doesn't work on PNW as of now.
I kept trying every combination of settings to flash this and different builds and either the Dolby app crashes and audio doesn't work (because of the installer not finding a root solution) or it flashes successfully but met with a bootloop. If anyone gets it to work, let me know!
Please raise any issues in the thread linked in the OP, not here. Thanks.
LenAsh said:
Please raise any issues in the thread linked in the OP, not here. Thanks.
Click to expand...
Click to collapse
Sorry! It was already an issue I brought up with that port in that thread, I was just letting everyone know the experience from it and that it doesn't work for our phones yet.
Original thread states SDK 26 (Oreo) as a requirement.
The magisk Dolby axon 7 module is working fine on nougat
---------- Post added at 10:54 ---------- Previous post was at 10:27 ----------
Teet1 said:
I kept trying every combination of settings to flash this and different builds and either the Dolby app crashes and audio doesn't work (because of the installer not finding a root solution) or it flashes successfully but met with a bootloop. If anyone gets it to work, let me know!
Click to expand...
Click to collapse
Can you test this for Oreo, I can't do because my wife's axon 7 needs to run stable on Los 14
https://forum.xda-developers.com/showpost.php?p=74943166&postcount=31837
Works on my mi a1 with Oreo.
You don't have to download to PC first, just mount system before flashing with twrp.
Thanks, I get work it with last version of PNW and Hellsgate kernel, making a clean install and installing supersu before, with magisk don't work for me.
May you have to use selinux permissive module for magisk.
MORFUZ KERNEL FOR P10 LITE OREO
:good: Hi guys, this kernel perfectly works also on our device. Works at HONOR 7X
https://forum.xda-developers.com/p10-lite/development/kernel-p10-lite-catuva21-t3798915
Feodorus 4PDA said:
MORFUZ KERNEL FOR P10 LITE OREO
:good: Hi guys, this kernel perfectly works also on our device. Works at HONOR 7X
https://forum.xda-developers.com/p10-lite/development/kernel-p10-lite-catuva21-t3798915
Click to expand...
Click to collapse
can you overclock?
zooyork8998 said:
can you overclock?
Click to expand...
Click to collapse
I can't tell I didn't try
Trying to figure out best settings, I agree kernel works great.
in the OP says he has Selinux permissive, then it is possible that viperaudioFX work?
rafi1123 said:
in the OP says he has Selinux permissive, then it is possible that viperaudioFX work?
Click to expand...
Click to collapse
Isn't that line edited , to say "missing"
Because permissive it not working
Will this work on treble GSI?
works for me on Stock Emui 8
Work on my custom ROM !
But there are problems with deepsleep with some governor
Can someone send me the stock kernel of bnd l21 ?
Well Ok it works, but how to get back to stock kernel.
lalitkhokhar said:
Well Ok it works, but how to get back to stock kernel.
Click to expand...
Click to collapse
Supposed to have made backup of kernel before flashing. Did you do?, Then just restore that backup.
I just tried flashing this with magisk and it said it installed, but is there an easy way to actually tell if it worked? I'm just trying to get viper4android to work to hopefully get around the dreadfully quiet headphone volume.
TiklMiPickles said:
I just tried flashing this with magisk and it said it installed, but is there an easy way to actually tell if it worked? I'm just trying to get viper4android to work to hopefully get around the dreadfully quiet headphone volume.
Click to expand...
Click to collapse
Go to settings, about phone - half way down it has kernal info
There's been some concerns on viper4 on customs roms causing bootloops -
Theres a dolby and a sony audio improvement zip to flash as well - i don't have links but try the telegram groups
nickzeptepi said:
Go to settings, about phone - half way down it has kernal info
There's been some concerns on viper4 on customs roms causing bootloops -
Theres a dolby and a sony audio improvement zip to flash as well - i don't have links but try the telegram groups
Click to expand...
Click to collapse
Thanks! Looks like it did install, but for some reason, the viper4android driver just won't install. Every time I open the app it keeps having me reinstall it, then when I reboot it just says I need to install it again. I'm wondering if it's specific to honor or the 7x since I can't seem to find anyone who's having similar issues.
TiklMiPickles said:
Thanks! Looks like it did install, but for some reason, the viper4android driver just won't install. Every time I open the app it keeps having me reinstall it, then when I reboot it just says I need to install it again. I'm wondering if it's specific to honor or the 7x since I can't seem to find anyone who's having similar issues.
Click to expand...
Click to collapse
they might not have similar problems cos they are not installing it.
Try find the dolby and sony sound things. - look also on mate 10 forums as its the same hardware
nickzeptepi said:
they might not have similar problems cos they are not installing it.
Try find the dolby and sony sound things. - look also on mate 10 forums as its the same hardware
Click to expand...
Click to collapse
It looks like the mate 10 is having the same issues, but after trying my headphones with the new kernel, it looks like the gain isn't limited to a super low volume like it was before! I'm not sure if this is just a placebo effect or if it actually solved the headphone volume issue, but I am hoping that was the fix I needed.
Has anyone tried this on Mate SE?
---------- Post added at 01:04 PM ---------- Previous post was at 12:47 PM ----------
TiklMiPickles said:
Thanks! Looks like it did install, but for some reason, the viper4android driver just won't install. Every time I open the app it keeps having me reinstall it, then when I reboot it just says I need to install it again. I'm wondering if it's specific to honor or the 7x since I can't seem to find anyone who's having similar issues.
Click to expand...
Click to collapse
Did you ever get V4A to work? Did you go into settings in the app and in Developer Mode select the Disable SELinux mode?
MikeyLee said:
Has anyone tried this on Mate SE?
---------- Post added at 01:04 PM ---------- Previous post was at 12:47 PM ----------
Did you ever get V4A to work? Did you go into settings in the app and in Developer Mode select the Disable SELinux mode?
Click to expand...
Click to collapse
Tried that, but it didn't work. I tell it to turn off Selinux, let it install the driver, then reboot the phone, and as soon as I reboot it and open the app again, it says the driver isn't installed
TiklMiPickles said:
Tried that, but it didn't work. I tell it to turn off Selinux, let it install the driver, then reboot the phone, and as soon as I reboot it and open the app again, it says the driver isn't installed
Click to expand...
Click to collapse
Have you tried any of the suggestions on the v4a xda thread. Like removing the stock audio overlay (xml) file first.
I keep seeing people say it will not work because selinux, or because of 64 bit drivers, then you go look at the xda thread, and see many (some) people saying it works for them.
If you are having the permissive setting working correct, then tell me if the guide on this link is working?
https://www.the***********.com/install-viper4android-on-android-oreo/
Pre-requistes:
Must be Rooted
Lucky Patcher
Download and Install Lucky Patcher and give it the root access.
For Android 9 Pie only
Navigate to toolbox and then patch to android.
Among three green options tick only the third
"Disable signature verification in the package manager"
Then press apply.
Wait a while and it reboots itself.
For OneUi 2 / Android 10
Install Edxposed (search in xda)
Then activate Lucky patcher in Edxposed Manager --- Reboot
Open Lucky Patcher -- Hamburger Menu -- Xposed settings-- activate all expect hide lucky patcher
After that install files from here
https://mega.nz/#!3p1XhC7R!ZIsiJLjJS5g6jT7xaP6gkWgcE0hCRa6vTeVFIj0bvHM
Incase you need to update modules, use nice lock and nice lock downloader.
You need to modify the downloaded apks. For that, open lucky patcher and navigate to "rebuild and install" then navigate to the location you've downloaded the apk most probably to sdcard--- download
Then click on the apk, select "rebuild" on the pop then finally "resign with test signature".
Now finally you can install the apk. You must repeat the process for each apk and after each update. Yes, it's a pain.
This method works for any Samsung device in which sideloading apk does nothing.
Now you're ready to roar.
not able to use Good Lock Module
I got rooted, installed magisk, tried to installed Good Lock & modules, installed successfully with the help of Lucky Patcher but modules are not working only Sound Assistant & One hand operation is working . kindly help
Model: Samsung M30s, Indian Variant.
Rooted
Bootlocked unlocked
---------- Post added at 04:02 AM ---------- Previous post was at 04:02 AM ----------
I got rooted, installed magisk, tried to installed Good Lock & modules, installed successfully with the help of Lucky Patcher but modules are not working only Sound Assistant & One hand operation is working . kindly help
Model: Samsung M30s, Indian Variant.
tanweer17 said:
I got rooted, installed magisk, tried to installed Good Lock & modules, installed successfully with the help of Lucky Patcher but modules are not working only Sound Assistant & One hand operation is working . kindly help
Model: Samsung M30s, Indian Variant.
Rooted
Bootlocked unlocked
---------- Post added at 04:02 AM ---------- Previous post was at 04:02 AM ----------
I got rooted, installed magisk, tried to installed Good Lock & modules, installed successfully with the help of Lucky Patcher but modules are not working only Sound Assistant & One hand operation is working . kindly help
Model: Samsung M30s, Indian Variant.
Click to expand...
Click to collapse
I couldn't get it to work on Android 10 but if you're on Pie and still it's not working, make sure Patch to Android in Lucky Patcher shows like this.
Keep in touch, thanks.
Rooted.ndroid said:
I couldn't get it to work on Android 10 but if you're on Pie and still it's not working, make sure Patch to Android in Lucky Patcher shows like this.
Keep in touch, thanks.
Click to expand...
Click to collapse
Thanks a lot. its working now. there are some random reboot but its working. Thanks once again for the support.
tanweer17 said:
Thanks a lot. its working now. there are some random reboot but its working. Thanks once again for the support.
Click to expand...
Click to collapse
Thank you as well, I was not able to figure out what was causing random reboots. Now I know.
Thanks buddy.
Rooted.ndroid said:
Thank you as well, I was not able to figure out what was causing random reboots. Now I know.
Thanks buddy.
Click to expand...
Click to collapse
Let us know when you found some solution for this random reboot.
Thanks in advance.
Did u find any solution to random reboots??
---------- Post added at 06:31 AM ---------- Previous post was at 06:30 AM ----------
Rooted.ndroid said:
Thank you as well, I was not able to figure out what was causing random reboots. Now I know.
Thanks buddy.
Click to expand...
Click to collapse
Did u find any solution to random reboots