Development for CWM for this device has begun!
Head over here to lend a hand, or just check it out
Hello huawei users, and welcome to my second 'Root your mediapad 7 youth' thread
Find the original one here
The only difference between this thread and the one linked above is the tool used
This one uses Kingo Android root(English), while the one in the other thread uses Vroot(Chinese)
Of the two, I believe Kingo root is easier to use, as it has step by step instructions in English
DISCLAIMER
1.Neither me nor Kingo is in anyway responsible for anything that does or does not happen to your device as a result of following these instructions. This includes but is not limited to: bricking your device, abnormal functioning of your device and voiding of warranty. Continuing with this guide is accepting these terms.
2. Rooting your device will most likely void your warranty. You have been warned.
3. This guide is intended solely for the device mentioned in the title. It is not meant for use with any other device, and may have unwanted effects.
That being said, let's get on with it
Prerequisites
1. Fully charged PC
2. Fully charged Huawei Mediapad 7 Youth (s7-701u)
3. Kingo Android Root. Find at this link
4. USB cable
Steps
1. Install and setup Kingo
There is a simple, standard windows wizard to follow. Nothing complicated.
2. Plug in your device into your PC
At this point, make sure kingo is open
3. Follow the on-screen instructions
These include enabling USB Debugging, clearly demonstrated on-screen
When it's done rooting, it will reboot, and you are rooted with SuperSU installed.
It's really that simple.
It didn't work
I've installed king root. I had to download HiSuite only then it started to do its work. Then again it still failed.. Although the app tells 'Root Successful' and restarted the tab, it still failed to root... help please
Domero said:
I've installed king root. I had to download HiSuite only then it started to do its work. Then again it still failed.. Although the app tells 'Root Successful' and restarted the tab, it still failed to root... help please
Click to expand...
Click to collapse
You are not alone, got the same issue here, i've tried vroot as well but my tab hangs and never go anywhere.
root failed
i tried those steps but it shows root failed. please help
huawei s7-721u root
I'm having huawei s7-721u model type..and i have rooted it..i need to install a new rom to it. can u tell me how ...anything text me through my whatsapp +60149447355 or mail me to my fb Yoges Waran Vasudavan.tx
Domero said:
I've installed king root. I had to download HiSuite only then it started to do its work. Then again it still failed.. Although the app tells 'Root Successful' and restarted the tab, it still failed to root... help please
Click to expand...
Click to collapse
whhw31 said:
You are not alone, got the same issue here, i've tried vroot as well but my tab hangs and never go anywhere.
Click to expand...
Click to collapse
fayaz faiyu said:
i tried those steps but it shows root failed. please help
Click to expand...
Click to collapse
I'm sorry to hear that you couldn't root your devices
Run through this FAQ to see if your computer and device are in the same config as mine
1. Do you have the Android SDK installed?
If not, go here : https://developer.android.com/sdk/installing/index.html and choose the 'eclipse ADT' option
2. Do you have the Java Development Kit Installed?
If not, go here : http://docs.oracle.com/cd/E19182-01/820-7851/inst_cli_jdk_javahome_t/index.html and follow the instructions
3. Do you have ADB configured?
If not, go here : http://androidcentral.us/2013/08/how-to-install-android-adb-and-fastboot-on-windows/
If following the above steps still does not help, PM me, hang in there, and I'll try to get back to you :good:.
@whhw31 I'm surprised that neither Kingo nor Vroot worked for you . I'll look ino this and see what I can come up with.
I'm working on a cwm port, but i am not done yet. I will alert you all when i successfully port it :laugh:.
When that is done, flashing SuperSu.apk + supersu should be a piece of cake .
Till then, just hang in there a little longer.
Success????
hi~ i have success install and success roots, but when its keep restart n root n restart n root...
its normal??? really successful roots????
---------- Post added at 06:06 PM ---------- Previous post was at 06:01 PM ----------
hi~ i have success install and success roots, but when its keep restart n root n restart n root...
Lastly shown ROOTS Status: NO
its normal??? really successful roots????
Related
Hello, i just recently purchased an Allview P5 smartphone, it's really cost efficient but recently i started getting some problems because the phone is not rooted and i was wondering how to root the android 4.04. i tried the superoneclick 2.3.3 and installed adb and something from java, bu when i rung the program superoneclick the program just freezes and it's not responding. any suggestions or guides that i should follow?
best regards
Chris
Try root for HaiPai I9220. For me it works.
Having the same problem here, Superoneclick freezes on step 7 iirc.
HaiPai didn't work for me either
So that: http://forum.xda-developers.com/showthread.php?t=1923764
There you will find this: http://www.mediafire.com/view/?othd1gf76pa97zg
It is 100% functional, but need more knowledge and skill.
Ok, I came a lot further this time, but still stuck.
As soon as I let Cygwin `patch` the recovery.img, it does the patching and stuff, but it doesn´t create a new recovery.img for some reason..
If you check page 13 of that PDF manual: I get all the same messages in Cygwin, except for that "Repacking" bit.
Any Idea why it isn't repacking?
Losing my nerves a bit because of Cygwin, what a horrible program to get to work properly. Installation went on beyond 100%, till about 2000% and then just started to count further in negatives >____<
You must have installed 7-zip archive program.
SuperOneClick should work for this device. You may try this:
1) unmount the sd-card, turn ON usb-debugging
2) turn OFF usb-debugging
3) connect device to PC
4) click "Root"
5) when "Waiting for Device" appear turn ON usb-debugging
6) when "Starting ADB Server..." turn OFF usb-debugging
7) then turn it back ON
8) and back OFF
9) repeat this while "Waiting for Device" appears again.
@Stovka: I have 7zip installed, the unpacking/extracting of the recovery.img goes fine in Cygwin, but for some reason it just skips the repack part.
@AndreyETO: As soon as I disable debugging mode, superoneclick stops the procedure, so I didn't get far with that
So sorry, I don't really know what is the problem...
It was all ok for me - the one problem was that I had not installed 7-zip, but after installing it worked exactly according to instructions.
If it were successful: after recording recovery.img to the phone is first necessary to go into CWM mode (no run phone) and install the root file attached. End CWM recovery mode is classically done by clicking on "reboot system now", but after the first time there appears one more option (just I don't know what name), which must be confirmed! Otherwise, when you restart the phone again, then will be loaded the original file and the recovery process must be repeated - upload modified recovery.img and then root file via CWM.
Found another way to root, and it worked
I used the method in this topic: http://forum.xda-developers.com/showthread.php?t=1886460 )I used the current newest version:V15)
The first time it didn't work, but after rebooting the phone and trying again it was succesfull
Anyway, thank you guys for trying to help.
Flapperbol said:
Found another way to root, and it worked
I used the method in this topic: http://forum.xda-developers.com/showthread.php?t=1886460 )I used the current newest version:V15)
The first time it didn't work, but after rebooting the phone and trying again it was succesfull
Anyway, thank you guys for trying to help.
Click to expand...
Click to collapse
Hey, i also tried this, and it didn't work, after clicking on restore that the device restared and than on the comand promp console it said error: device not found, i tried repeating the process several times but it didn't work, any other ideeas?
Neither of those above work for me either.. So... any other suggestions?
Confirmare
sics3th said:
Hello, i just recently purchased an Allview P5 smartphone, it's really cost efficient but recently i started getting some problems because the phone is not rooted and i was wondering how to root the android 4.04. i tried the superoneclick 2.3.3 and installed adb and something from java, bu when i rung the program superoneclick the program just freezes and it's not responding. any suggestions or guides that i should follow?
best regards
Chris
Click to expand...
Click to collapse
( for P5 allview mtk6577 4.0.4 ics2 )
Search this Root_with_Restore_by_Bin4ry_v15.7 on the forum. It works like a charm (both on linux and windows ).
It use restore feature on the phone.
The link is here http://forum.xda-developers.com/showthread.php?t=1886460
http://forum.xda-developers.com/attachment.php?attachmentid=1398011&d=1350123242
Anyone found a safe way to root this phone? Or maybe a custom rom for this one?
I think it is a great phone which should has a place into xda forum
Root_with_Restore_by_Bin4ry_v15
i have downloaded version 15 of this, because v17 for some reason did not worked...
so go ahead and enjoy.
Flapperbol said:
Found another way to root, and it worked
I used the method in this topic: http://forum.xda-developers.com/showthread.php?t=1886460 )I used the current newest version:V15)
The first time it didn't work, but after rebooting the phone and trying again it was succesfull
Anyway, thank you guys for trying to help.
Click to expand...
Click to collapse
i can confirm that this works.
now, can anyone tell how i can make a nandroid for this phone? couldn't find any image to boot with so i can see the partitions and use linux dd
U all can use this metod:http://forum.xda-developers.com/showthread.php?t=1886460 for rooting P5 Mini.
And watch this video tutorial:http://forum.xda-developers.com/showthread.php?p=33470626#post33470626
I rooted my P5 Mini with "Root_with_Restore_by_Bin4ry_v15" and it works fine.
works for P6 also
Flapperbol said:
Found another way to root, and it worked .
Click to expand...
Click to collapse
Same experience on Allview P6 Stony (P6_0201_V1179 software build). This method works for me - similarly I had to run the script (and the reboot cycle) 2x before it had an effect.
As pointers for others, before you try this method you need to make sure you have ADB drivers installed. Trying to install stock google drivers didn't work at all for me, what worked for me was installing latest PdaNet drivers (pdanetZ350.exe) from here: junefabrics.com/android/download.php *
Don't forget to install OTA Rootkeeper app afterwards and run it once - hopefully saves you the hassle of rooting again if the P6 should receive an incremental update.
Enjoy, thanks Flapperbol!
(*= sorry Im not allowed to post links)
Version 18 also works
Just to let you guys know that version 18 of Root_with_restore works. I just the ADB drivers from the PDAnet install (which I cancelled after the drivers were installed) and the phone is now rooted!
Does anybody know how to get rid of those ugly allview icons? I hate those things.
neelz said:
Just to let you guys know that version 18 of Root_with_restore works. I just the ADB drivers from the PDAnet install (which I cancelled after the drivers were installed) and the phone is now rooted!
Does anybody know how to get rid of those ugly allview icons? I hate those things.
Click to expand...
Click to collapse
u can install a new home launcher.i use nova launcher 2.0 prime and u can download icon package and install in nova
Please help me. Can you please tell me how to root iball slide 7803q-900 its running on android 4.4.2.
I searched the internet about this but I did not find any information regarding this.
Thanks
ashwanid said:
Please help me. Can you please tell me how to root iball slide 7803q-900 its running on android 4.4.2.
I searched the internet about this but I did not find any information regarding this.
Thanks
Click to expand...
Click to collapse
I am also looking for the same. The device is detected as "MyHTC" and it seems that the bootloader is locked. There is no fastboot option to get the device id to unlock bootloader. I can get into recovery mode. I am not able to post the link to the product page but you can search and find the same on site iball.co.in.
Please try installing Towelroot on your device and using it to obtain root. It will root many Kitkat devices.... uses a few different exploits to achieve root access.
There is a LifeHacker thread on it here: http://bit.ly/1qAobRl
I tried baudi root to root my device. The Chinese superuser is installed but there is no root access. And that superuser apk made my tablet sluggish. Can u tell how to remove the superuser.apk. my tab isn't rooted.
And towel root and many other apps doesn't work.
Thanks
And I want to tell that first I installed kingroot and my tab was rooted. But game killer was not working then I unrooted . then again tried with baudi root but It made my tab sluggish.
Please help to remove that superuser
Download the latest kingroot.
uttam27 said:
I am also looking for the same. The device is detected as "MyHTC" and it seems that the bootloader is locked. There is no fastboot option to get the device id to unlock bootloader. I can get into recovery mode. I am not able to post the link to the product page but you can search and find the same on site iball.co.in.
Click to expand...
Click to collapse
I could get into fastboot mode through adb command "reboot bootloader". However, fastboot screen is blank with only "Fastboot=>" mentioned at bottom left of screen. In bootloader mode device is recognized as "mtk6582_phone". I don't have the phone ROM file that could have been used to create custom CWM recovery and without root I cannot backup the phone ROM. One-click root methods fail. Any ideas?
Try to root with kingroot it rooted this device.
Download the latest version of this app.
ashwanid said:
Try to root with kingroot it rooted this device.
Download the latest version of this app.
Click to expand...
Click to collapse
I am little skeptical about using methods that are not well-known. You mentioned you faced some issues after this..?
I tried Kingo but it failed
I said to use kingroot and not Kingo root. Download it here kingroot.net
So here's the long awaited root!!!
Just use the following root tool. I just Used it myself
Its called root genius
Download it here
htt p :// downloa d1766 . mediafire .com /9g59 3gbw8bjg/j17ivc iz1x808wo/RootGen ius_v2.3.0.zip
Just backspace the spaces in the link and copy it to the address bar of your browser then press enter to download the file.
This is because i couldn't post a link
I am sure this works fine
it worked fine for me
Connect the Tablet to your pc and click on root
That's it
Congratulations! You have rooted your tablet...
Hope this Helps
Regards
Adarsh Mathai
Just use iroot (also known as vroot) Easy steps starts here:
1. DOWNLOAD iroot /vroot
2.Use ur usb cable and connect ur phone to pc
3. Put ur phone in usb debugging mode available in developer option
4. IF u dont have developer option then go to setting->about phone and continously click build number till you get notified.
5. And open vroot and let it detect ur phone. It will ask permission so give permission from ur tablet. It will download and install some drivers.
6. U can see there is a option to root ur phone go ahead and click it
7. Ur tablet may restart so don't. Pannic
Volla rooted ur iball
Hi, I want to root a cubot x9. Could you recommend me the apps that I can use, for root by telephone, and from pc? I'd rather to root my phone by phone without using the pc. Thanks.
Did you have any luck figuring out how to root this phone?
You can see it in this forum:
http://www.movilesdualsim.com/tema/root-y-twrp-recovery-mds-cubot-x9-twrp-recovery-2-7-1-0.91238/
Actually, after a bit of googling I found this tutorial on getting TWRP onto any Mediatek phone, which includes links to various tools for rooting (and is also in English )
Are there any different roms out there for the Cubot X9 besides the stock?
mjstallion said:
Are there any different roms out there for the Cubot X9 besides the stock?
Click to expand...
Click to collapse
http://www.needrom.com/download/custom-rom-mod-cubot-x9-basada-en-v07/
RAMIAAY said:
http://www.needrom.com/download/custom-rom-mod-cubot-x9-basada-en-v07/
Click to expand...
Click to collapse
Note that this appears to be just a stock ROM mildly modified to work better in Spain. And on top of that, it appears to be based on an old version of the official ROM (v7 - it's up to v9 now according to the "official" thread on NeedRoms, but I have no idea what the source is for the official ones on NeedRoms, I can't find anything on the Cubot page)
And just a follow-up - I'm guessing the "official" roms on NeedRom are via the OTA updates.
WearySky said:
And just a follow-up - I'm guessing the "official" roms on NeedRom are via the OTA updates.
Click to expand...
Click to collapse
If anybody in future is looking to root the X9, feel free to inbox me. I'm going to write up a tutorial on it, but until that's ready, I can give pointers on how to go about it. For a start, none of the one-click root options work, the only way I was able to root it was to do the no-root CWM install, and then root from CWM.
Hey! This is my first post, hopefully of many to come!
Iv just bought the X9, and to want to root this bad boy.
Its got a lot of potential I think, under the covers.
It just needs the power of su
If anyone can help, that would be awesome, as I've spent
Hours goofking it, and, well, its pretty crap to say the least!
Thanks in advance
double post
I was able to successfully root when I first got the phone. After doing an OTA update, I can't get into TWRP, even after trying to root again.
Has anyone rooted after doing a OTA update?
eth0hw said:
Hi, I want to root a cubot x9. Could you recommend me the apps that I can use, for root by telephone, and from pc? I'd rather to root my phone by phone without using the pc. Thanks.
Click to expand...
Click to collapse
You can root it with Kingo ROOT.
I have tried it and it worked.
I've successfully rooted it with iRoot
Is there already a Custom Rom with English instructions available for the cubot X9?
---------- Post added at 02:21 PM ---------- Previous post was at 02:18 PM ----------
alek92 said:
I've successfully rooted it with iRoot
Click to expand...
Click to collapse
iRoot is stuffed with mallware! Don't use iRoot! (I mean it)
cemslam said:
Is there already a Custom Rom with English instructions available for the cubot X9?
---------- Post added at 02:21 PM ---------- Previous post was at 02:18 PM ----------
iRoot is stuffed with mallware! Don't use iRoot! (I mean it)
Click to expand...
Click to collapse
What's the worst that can happen ?
I've tried iRoot. This will automatically install the 'Secure Search' program (and more!) in your browser which is very difficult to remove. Therefore iRoot is definitely a no go for me!
I recommend "kingroot" not kingo root. I used kingo but was having trouble with lucky patcher working properly. When I used kingRoot it worked like a charm.
Here is the link for kingroot: https: //sites.google.com/site/androidxdacom/file/Kingroot_V4.5.0.902.apk?attredirects=0
Sent from my rooted cubot X9 using XDA Free mobile app
Root cubot x9-TWRP recovery
Here is a quite simple guide to root your cubot x9 and install TWRP recovery. I have tested myself and it works fine!
DISCLAIMER: I AM NOT RESPONSIBLE FOR WHAT WILL HAPPEN ON YOUR PHONE! DO IT AT YOUR OWN RISK
What you will need: A cubot x9 (Yeap I know...dont be shocked)
A PC running Windows (This method has been tested on win7 and win10)
A USB cable
Ten minutes from your life and some magic files that I will post at the end of the post.
*IMPORTANT* : Because I am a new member on the XDA community I cannot post any external websites so I cant post any files *sorry * . To find the files that I am referring too just google needrom . com and login in in this website search for cubot x9 and you will find all these files over there *OR* you can just send me a PM and I will reply with the links of the files.
(1):First of all before we start rooting we need to make sure that we have the correct drivers on our Window PC. Simple open the Control Panel go to Device Manager. Then turn off your phone and plug it in your computer. If you see for a moment a device with the name "PreLoader USB VCOM Port" the you have the correct drivers (clap*clap). If anything else appears you need to download the correct drivers. Just download the "All MTK USB Driver 2014.rar" file and unzip it. The re-plug your phone(turned off!) to your PC and when the device shows it self quickly right-click on it and choose update drivers. Then choose update through your computer and choose the folder you just unziped and press OK. Wait a while and *boom* you have your drivers. Before you continue check again if the drivers are correct ( if the "PreLoader USB VCOM Port" shows on Device manager). If not repeat this step.
Now lets root our phone like there is no tomorrow !
(2): Download and unzip the "SP Flash Tool 5.1343.01.rar" and "RECOVERY CUBOT X9 (MDS TWRP Recovery 2.7.1.0.). Rar". Then download the "UPDATE-SuperSU-v2.40.zip" file. Turn on your phone and copy paste the "UPDATE-SuperSU-v2.40.zip" file on your phone sorage(as a zip!). After that unplug your phone and turn it off. Go to the SP FLASH TOOL folder you unziped and run the flash_tool application. You press OK on the first window that pops up and then you choose on your right Scatter-loading. Browse your PC and choose the "MT6592_Android_scatter CUBOT X9.txt" which is inside the recovery folder that you unziped on the beginning of this step. Press ok. Then on your left you go to options->option->download and make sure to tick the box which says DA DL All with Checksum. Close that window and find and choose "Download only" and then click download(see the image on the end). After that the application is ready and it looks for our phone.
And now here is the tricky part. Right now our program is ready and searching for our phone. If we have the correct drivers and connect our turned off cubot the program will install the TWRP recovery in a few seconds. If everything went good a green circle will popup. After we see the green circle we have to go fast and press simultaneous the volume+ and power button on our phone till we see the CUBOT sigh. If we were a little too late the recovery will be lost and the phone will boot normally on stock. If this happens repeat the step (2) again.
(3): (Do you feel it? Root is near!) If everything went as planned right now you are on the TWRP recovery. Simply press install and find the UPDATE-SuperSU-v2.40.zip you saved on your phone storage before. You choose it and the you "swipe to install". After the installation finishes reboot your phone. After some magic your phone is now rooted!!!
After the reboot if you ever want to run on the recovery simple turn off your phone plug it on the power and press volume+ and power simultaneous.
Please hit thanks button
for root i have used Kingo ROOT
https://www.youtube.com/watch?v=kVxwCXx-sQY
Hi im new... and I would like to ask how to root alcatel one touch pop s3 5050X android version 4.3
there was a post already on how to root the device but it doesnt work on model 5050X
any help will do. thank you.
sorry if the thread is in the wrong section
Sicnarf26 said:
Hi im new... and I would like to ask how to root alcatel one touch pop s3 5050X android version 4.3
there was a post already on how to root the device but it doesnt work on model 5050X
any help will do. thank you.
sorry if the thread is in the wrong section
Click to expand...
Click to collapse
See the instructions (author has since updated) at
http://click.xda-developers.com/api...Touch Pop S3</b> 5050 | Every Android version
and the second page comments for recovery hints. TWRP requires some study and preparation before use so it's not good to be stuck when attempting recovery.
Note the comment on the 3rd page about the updated recovery image that lets you see what you are doing on the screen. For me I got it working, working in the dark (ie. not seeing anything on screen), so it's too early for a video tutorial.
Please Help me :/
When i use the .cmd, i put /storage/sdcard0 or /storage/sdcard1
I have a message :
''The specified path was not found''
Rooting using Kingo Root
Rooting nowadays is very simple.
But the easiest way to do it is the following:
1. Download Kingo Root for Windows, Mac or Linux;
2. Install Kingo Root;
3. Open the program;
4. Connect your phone to your pc through USB cable and wait for Kingo Root recognize it;
5. If your phone is rootable it will appear a button saying "ROOT", click there (If your device is not rootable then you are out of luck and you must try another method)
6. Don't remove your phone and don't click anywhere, wait until the rooting process is finished;
7. After this your phone should reboot, it means you are now rooted (If your phone did'nt rebooted, manually reboot it then);
8. Enjoy!
Note: Rooting will void the device's warranty, root at your own risk.
Download the phone's drivers if needed and disable Windows, Mac or Linux firewall if needed.
Hope it works for you!
Link for Kingo Root: kingoapp.com
So I as successfully able to root the phone using the Windows version of Kingo Root and then installed Super Su and Busy Box but I can't get a recovery to work on it, yet.....would love a Recovery like TWRP or Phil's and CM13 port for this phone.
Finally got it rooted with KingRoot
Just noticed that the build.prop has the ro.build.id-LMY47V
That's the 5.1.1 for the 2013 Nexus 7
OldMansGhost said:
Finally got it rooted with KingRoot
Click to expand...
Click to collapse
Hi I would to know how you rooted the Coolpad Rogue 3320A. I was looking at Kingo root and KingRoot and they dont give good instructions.
I tried the android versions of both KingRoot and Kingo Root without success. The Windows version of Kingo Root failed but the Windows version of KingRoot succeeded in rooting my Coolpad Rogue 3320A.
The Kingo Root Windows app gives instructions in English when you run it. Which are to connect the phone to the computer with a USB cable and enable "USB debugging" in the phone's "Settings" under "Developer options'. Then click the ROOT button when it appears. KingRoot is in Chinese, but I just followed the same procedure.
To get "Developer options" to show in the phone's settings , you need to give 7 or 8 taps to the "Build number" under "About phone" in the phone's "Settings".
Before I tried rooting I also ran COOLPAD-140926-SETUP.EXE in the CD Drive labeled "Coolpad_USB_Driver" that shows up in Windows Explorer when the phone is connected to the PC by USB cable. I also installed minimal ADB and Fastboot and Google USB drivers using 15 seconds ADB Installer v1.3 http://forum.xda-developers.com/showthread.php?p=48915118 But I think that they may not have been necessary.
The version of Windows KingRoot I had success with was KingRootSetup_v3.1.0.1125_105002.exe downloaded from kingroot.net
There's a setting in the developer options to allow the bootloader to be unlocked. I've not tried to fastboot to work yet.
"Vanilla" ROM or at least vanilla dialer/phone apps?
I'm interested in some kind of vanilla dialer/phone/telecom app set (5.1.1 based) or a full ROM that's AOSP so that I can toss out T-Mo's "Wi-Fi Calling" and use the built-in Android SIP client with its normal configuration screens.
If anyone has accomplished the same with this device or any other T-Mo 5.1 based device, please let me know. I'd really like to be able to configure the system dialer to connect to my SIP PBX directly rather than use a half dozen hacks to give me half-working VoIP calling of my own.
(Note: If there's a T-Mo 4.4 based image out there, that would suffice, as I can at least make VoIP apps intercept dial requests, which T-Mo Wi-Fi Calling prevents on 5.1. This device shipped with 5.1, but it might be possible that a similar model's ROM image might work on this as well.)
/system image
anyone with a rooted 3320a that might be able to provide me with a stock(or rooted stock) image of /system? i managed to softbrick my device after rooting and i forgot to do a dd of the system partition before mucking around in it
thanks in advance
Root Genius Might Work
venuspcs said:
So I as successfully able to root the phone using the Windows version of Kingo Root and then installed Super Su and Busy Box but I can't get a recovery to work on it, yet.....would love a Recovery like TWRP or Phil's and CM13 port for this phone.
Click to expand...
Click to collapse
My Arise don't have a custom recovery either. This kind of disappoints me, as this phone is a good phone for the price.
However, I thought I'd share with you guys that Root Genius may also work to root the Rogue as it does root my Arise. (I don't own a Rogue, so I can't confirm this.) It's always better to have more than one way to root your phone safely right?
Kingroot
mcduffy said:
I tried the android versions of both KingRoot and Kingo Root without success. The Windows version of Kingo Root failed but the Windows version of KingRoot succeeded in rooting my Coolpad Rogue 3320A.
The Kingo Root Windows app gives instructions in English when you run it. Which are to connect the phone to the computer with a USB cable and enable "USB debugging" in the phone's "Settings" under "Developer options'. Then click the ROOT button when it appears. KingRoot is in Chinese, but I just followed the same procedure.
To get "Developer options" to show in the phone's settings , you need to give 7 or 8 taps to the "Build number" under "About phone" in the phone's "Settings".
Before I tried rooting I also ran COOLPAD-140926-SETUP.EXE in the CD Drive labeled "Coolpad_USB_Driver" that shows up in Windows Explorer when the phone is connected to the PC by USB cable. I also installed minimal ADB and Fastboot and Google USB drivers using 15 seconds ADB Installer v1.3 http://forum.xda-developers.com/showthread.php?p=48915118 But I think that they may not have been necessary.[/Q UOTE] I opens kingroot in my browser and used it for translation
Click to expand...
Click to collapse
hi guys,i av rooted coolpad 3320a with kingroot windows version but when i try to unlock with sigma box it says root the phone first. Anyone with a solution pliz help. Thanks in advance
KingRoot (Android version) worked for me
mcduffy said:
I tried the android versions of both KingRoot and Kingo Root without success. The Windows version of Kingo Root failed but the Windows version of KingRoot succeeded in rooting my Coolpad Rogue 3320A.]
Just another data point. . .
KingRoot (Android app) v4.9.0 142 worked on this Coolpad:
Model: 3320A
Android: 5.1.1
Baseband: GW_T2_01134._01
Kernel: 3.10.49 (08/10/2015)
Build: 5.1.157.00.T2.150810.LMY47V
Happy camper -- For $20 this is a great no-tears tinkering platform.
Click to expand...
Click to collapse
myoshinaga said:
mcduffy said:
I tried the android versions of both KingRoot and Kingo Root without success. The Windows version of Kingo Root failed but the Windows version of KingRoot succeeded in rooting my Coolpad Rogue 3320A.]
Just another data point. . .
KingRoot (Android app) v4.9.0 142 worked on this Coolpad:
Model: 3320A
Android: 5.1.1
Baseband: GW_T2_01134._01
Kernel: 3.10.49 (08/10/2015)
Build: 5.1.157.00.T2.150810.LMY47V
Happy camper -- For $20 this is a great no-tears tinkering platform.
Click to expand...
Click to collapse
So what is the final verdict?
Click to expand...
Click to collapse
Hello, but I have a question. Is busybox OK on this device? I am afraid that installing it may brick the device
got it working with kingo root, but only after kingroot said it worked. otherwise kingo root kept freezing. havent been able to get supersu installed but kingo root works just fine
I was able to root the coolpad rouge without a computer. I'm going to create an account and upload the tut. -cyphermil
myoshinaga said:
So what is the final verdict?
Click to expand...
Click to collapse
You CAN root this with the Kingroot apk.
I'm new and can't post links so to make the links below work just abbrev the http and add a colon.
As soon as I can post links I will fix them.
PROOF:
Hypertexttransferprotocol//imgur.com/a/SXmMc
Here's what I did:
1) download latest kingroot Hypertexttransferprotocol//androidmtk.com/download-kingroot-application
2) enable USB debugging in developer options
3) enable OEM boot loader unlock in developer options
6) enable unsigned APKs
7) install kingroot apk
8) run kingroot
9)?
10) PROFIT
Will update with better details later. Sorry for mistakes and formatting I'm on my rooted coolpad rouge.
Kotetsukun said:
Hello, but I have a question. Is busybox OK on this device? I am afraid that installing it may brick the device
Click to expand...
Click to collapse
Busybox is safe to install. Will post screenshots when I am able to include links
Never mind. I am happily satisfied anyways. Thank you.
Coolpad Rouge 3320A
So im am writing this post via on my mac...
So i want to root my phone but when i tried to install king root i got to 90 percent then the app closes its self and disables my wifi unless i reboot my phone.
im just need to root my phone for to install xposed framework and installer
~Ninja, Aug/13/16