[ROM][G900H][Lollipop Deodexed]Zephyr Lite v9,Rooted,Knox Free,Debloated,BOG6 - Galaxy S 5 Android Development (Exynos)

Simple, Stable, Smooth...
I am not a developer, I have learnt (and am still learning) many things from the immensely talented developers on this Forum.
This Rom has been created with the thought that there are many people who wish to continue with Samsung Stock Rom to give them a hassle-free use of their Smartphone, yet they need their Rom to be bloatfree, efficient and Smooth.
This ROM is rooted and deodexed for my daily use. Will try to keep the version updated as and when a new stock firmware (with higher/better changelog) is released for the Galaxy S5 (G900H) version.
Please do not expect me to customise this ROM any more than what it is. As I said I am not a Developer. Thanks for Understanding.
Only for G900H (Exonys Variant)
DISCLAIMER
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards. YOU are choosing to make these modifications on your phone and you are solely responsible for your actions.
Enjoy/Share the Rom and hit Thanks, if you like it.
Base Firmware (v9)
Model SM-G900H
Model name GALAXY S5
Country Iraq
Version Android 5.0
Changelist 5501496
Build date Wed, 29 Jul 2015 03:40:38 +0000
Product code MID
PDA G900HXXU1BOG6
CSC G900HOJV1BOG2
Features(Lite)
•Latest Firmware for G900H - BOG6
•Deodexed
•Zipaligned
•Rooted (Supersu 2.49)
•BusyBox
•Init.d scripts support
•Debloated
•Knox Fully Removed
Download link:
Zephyr Version 9 (Deodexed Version)
Zephyr_v9_Deodexed_BOG6
https://mega.nz/#F!lM4XSLwC!mgCUeSyThgLrPnB10orVtA
Size: 700 MB (Folder includes latest Bootloader and Modem, Please flash them after clean installing the rom first)
https://www.androidfilehost.com/?fid=24052804347798891
Size: 700.9 MB (md5: 098cde607a13d8c9d97bb96d965c11d1)
Androidfilehost
Modem - MDM10.tar.md5
https://www.androidfilehost.com/?fid=24052804347798889
Size: 15.3 MB (md5: d88375cbfdcebddc7f7105815defca4d)
Bootloader - BTL10.tar.md5
https://www.androidfilehost.com/?fid=24052804347798888
Size: 1.1 MB (md5: 4a723263afaa65cc9076a1371d085a56)
Add on Pack for Zephyr 9
Zephyr_v9_Addons_Deodexed.zip (112.4mb)
https://mega.nz/#!YJQXAQTQ!2OD7-fug8Xc5uo79vBw3xPdHoZ_0OAL6gwF7At0tDoo
Changelog v9 -
Lollipop
Deodexed (Fully ART) - A clean install is required for installing this rom
Installation Instructions:
- Make sure you install the BOG6 Bootloader/Modem (For more information check Post #2
- Copy the Zip to your Phone Memory (Check md5 checksum)
- Use Latest recovery - TWRP by @MOKIAAA recommended
- Backup your existing rom
- Format System
- Wipe Data
- Wipe Cache
- Wipe Dalvik Cache
- Install Rom
- Install Add-ons
- Reboot
- Enjoy
First Boot shall take a long time(At least 10-15 minutes)
Note :
Clean Install
Please take an EFS backup and a nandroid backup before installing.
Inspiration &Thanks to:
@sammobile @dsixda
@Yank555
@sotmax
@zoot1 @Lord Boeffla @Chainfire
@temasek @rovo89 @Perka @JustArchi (for his amazing ArchiKitchen)
@edgarf28
@amarullz for amazing tool Aroma
@svadev for his SVADeodexerForArt
@Nikhil & @RajatPatel for their incredible tool Android Flashable Zip Creator
And to all others who have helped me along the way...

BOOTLOADER/MODEM Package
Already included in the rom folder
Install Instructions:
" Source/credits: @edgarf28 "
For the latest version, would suggest you flash rom first(if you are already on Lollipop) via recovery. Flash Bootloader and Modem via odin after flashing the rom.
This procedure can be done anytime and it won't wipe anything from your device! Your current ROM, Kernel & Recovery will remain the same after you flash this.
Do exactly as mentioned:
- Make sure you have downloaded the correct packages
- Switch off your phone completely (This is IMPORTANT)
- Wait for 30 seconds
- Start your Phone in download mode: Press Vol down + Home + Power buttons till the screen turns on, press Vol Up to continue (Only enter download mode on this way, otherwise it won't work!!)
- Connect your phone to your computer
- Open Odin 3.09 on your PC (Older versions won't work correctly!)
- Click on the 'BL' button, and load in your BOOTLOADER tar.md5 file
- Click on the 'CP' button, and load in your MODEM tar.md5 file
- DON'T TOUCH ANYTHING ELSE (you can brick your phone if you choose other settings in Odin)
- Click on the Start button
- Wait till it finish flashing.
- Your phone reboots automatically after flashing.
- Always check after flashing: Settings -> About device -> Baseband; that should show you the same modem build number noted as here.
And also check if the bootloader got flashed correctly by downloading an AndroidTerminal app, and enter this command: getprop ro.boot.bootloader
NOTE: Sometimes the modem/baseband needs to be flashed 2 or even 3 times till it will get flashed correctly.

One more

Finally A Rom For G900H

Finally!!
please tell me selinux is permissive in this rom...or just tell me how to change selinux mod

mahir1010 said:
please tell me selinux is permissive in this rom...or just tell me how to change selinux mod
Click to expand...
Click to collapse
Selinux is not set to Permissive. You could try to change it with selinuxmodechanger_v1.2.apk from xda forum

manojpy said:
Selinux is not set to Permissive. You could try to change it with selinuxmodechanger_v1.2.apk from xda forum
Click to expand...
Click to collapse
first of all a big thanks to you for releasing outa new rom exclusively for octa core variant :good::good::good:
and second what can i do after changing selinux status will it give a performance boost or something ??
and third just asking as you have stated that it is deodexed then why is it 983 mb in size and not small like sterolite rom which is lik e450 mb in size
no offence just asking and i am not making any comparison

manojpy said:
Selinux is not set to Permissive. You could try to change it with selinuxmodechanger_v1.2.apk from xda forum
Click to expand...
Click to collapse
i know about that app i already tried it as it says in the description the app doesn't work with Samsung devices even if knox is removed but thats alright i cant complaint about it at least we have a rom now
---------- Post added at 07:40 PM ---------- Previous post was at 07:37 PM ----------
sharingan said:
first of all a big thanks to you for releasing outa new rom exclusively for octa core variant :good::good::good:
and second what can i do after changing selinux status will it give a performance boost or something ??
Click to expand...
Click to collapse
no it just helps running some root apps which doesn't work with selinux enforcing i don't know much about it

mahir1010 said:
i know about that app i already tried it as it says in the description the app doesn't work with Samsung devices even if knox is removed but thats alright i cant complaint about it at least we have a rom now
---------- Post added at 07:40 PM ---------- Previous post was at 07:37 PM ----------
no it just helps running some root apps which doesn't work with selinux enforcing i don't know much about it
Click to expand...
Click to collapse
thanks bro i get it now

sharingan said:
first of all a big thanks to you for releasing outa new rom exclusively for octa core variant :good::good::good:
and second what can i do after changing selinux status will it give a performance boost or something ??
and third just asking as you have stated that it is deodexed then why is it 983 mb in size and not small like sterolite rom which is lik e450 mb in size
no offence just asking and i am not making any comparison
Click to expand...
Click to collapse
I have not faced any root issue on the Selinux enforced mode. Device with knox security do face problem changing to Permissive. Am not qualified to try it too.
I was also using the rom you mentioned and he has done a wonderful job. Edgar's rom is bare bones with add on package. I feel the basic features that Samsung has given should be there and hence have removed only the absolute unnecessary files. Try it and let me know your views. No offence taken at all[emoji6]

manojpy said:
I have not faced any root issue on the Selinux enforced mode. Device with knox security do face problem changing to Permissive. Am not qualified to try it too.
I was also using the rom you mentioned and he has done a wonderful job. Edgar's rom is bare bones with add on package. I feel the basic features that Samsung has given should be there and hence have removed only the absolute unnecessary files. Try it and let me know your views. No offence taken at all[emoji6]
Click to expand...
Click to collapse
thanks bro
no doubt i wil try and post my review
once again i have to say nice work
:good::good::good:

Good Job mate :good::good::good:
Keep up the good work !!! :good::good::angel:

lucky_sidhu said:
Good Job mate :good::good::good:
Keep up the good work !!! :good::good::angel:
Click to expand...
Click to collapse
Thanks Paaji

Hi dude
nice job ... :good:
how did you removed knox ?
I guess you have downgraded bootloader or ...
1 - is there any way to flash that bootloader to a stock rom to remove knox ?
2 - is there any way to make knox 0 and dont remove it totally ?
(I tell that becase of this please read : http://forum.xda-developers.com/showthread.php?t=2740340&page=1)

Great work.....
Highly appreciated...:good:
and one more thing what are the changes you made in this ROM any improved battery life
and which Kernel and MOD's
one last thing try to port other ROM's feature in ya next update like AllianceROM or OMEGA ROM
if you need help regrading testing and debugging i can help you with it
you made G900H users proud
keep your work alive

Hello. Thank you for your rom, but it doesn't work for me ._. I did as you told in instructions. Used CWM and Philz wiped/formated and nothing, it just stucks on Samsung GALAXY S5 Powered by Android screen. I tried flashing couple of times, same result. And yes I got g900h model. Any help apretiated.
P.S. I checked md5sum, it's exact as in your post

safereg said:
Hi dude
nice job ... :good:
how did you removed knox ?
I guess you have downgraded bootloader or ...
1 - is there any way to flash that bootloader to a stock rom to remove knox ?
2 - is there any way to make knox 0 and dont remove it totally ?
(I tell that becase of this please read : http://forum.xda-developers.com/showthread.php?t=2740340&page=1)
Click to expand...
Click to collapse
Thanks. Knox has been removed while cooking the Rom itself (using Archikitchen).
No bootloader has not been downgraded. As of now once you trip knox it cannot be reset.
Sent from my SM-G900H using Tapatalk

Shindsu said:
Hello. Thank you for your rom, but it doesn't work for me ._. I did as you told in instructions. Used CWM and Philz wiped/formated and nothing, it just stucks on Samsung GALAXY S5 Powered by Android screen. I tried flashing couple of times, same result. And yes I got g900h model. Any help apretiated.
P.S. I checked md5sum, it's exact as in your post
Click to expand...
Click to collapse
Are you coming from NG3 to flash this rom. If not, please flash the Ng3 bootloader first using ODIN and then flash the zip (will add a note in OP). I have tested the installation process many times before uploading. Had no issues.
Sent from my SM-G900H using Tapatalk

9988338891 said:
Great work.....
Highly appreciated...:good:
and one more thing what are the changes you made in this ROM any improved battery life
and which Kernel and MOD's
one last thing try to port other ROM's feature in ya next update like AllianceROM or OMEGA ROM
if you need help regrading testing and debugging i can help you with it
you made G900H users proud
keep your work alive
Click to expand...
Click to collapse
Have not done any tweaking for battery but will definitely have better battery than stock I guess (let me know). Have only added the ad block feature. Cannot add features like alliance and Omega due to limited knowledge and also lack of time from work and personal life. You are free to use this as a base (credit will be appreciated) and take it to next level. I am offering my services as a tester. [emoji4]
Sent from my SM-G900H using Tapatalk

thanku
a heartly thanks to u dear @manojpy for ur great jobbb i wana try ur rom:good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::fingers-crossed:
---------- Post added at 10:14 AM ---------- Previous post was at 09:46 AM ----------
plzzzz!!! add call recording in call screen

Related

A8 PORT Amazing Experience(Sorry for Trouble Guys For Last Thread close i Apologies)

Full Stock A8 Deodex Rom
Rom Is For S6 And S6 Edge Users
Model Support
1 SM G920 i/f
2 SM G925 i/F
3 Other Model Don't know You Can Give it Try.
I'm Presenting A8 Full DeoDex Rom
Special Thanks To @ambasadii For give this rom as Base for s6 and s6 edge user
Quote(What's inside)
☆Android: 6.0.1 (Official) - based on A810FXXU1API7 firmware!
★ ROM security patch level: 2016-09-01
★ ROM contains only 100% original stock files (no modded APK, Framework & Lib files)
★ S6 Kernel (ramdisk modified)
★ Stock S6 Edge Camera (100% working)
★ Fully GraceUX Experience
★ Fully Deodex Version
★ Fully Ported A8 Apps
★ Fully Ported A8 Framework
★ Fully Ported A8 SystemUI
★ Fully Ported A8 Settings
★ Adblock Host
★ 101 Fonts
★ AppLock Support
★ S-View Cover Support
★ Many CSC Features like: call recording, receive MMS without mobile data on, support recent app protection, LTE data icon instead of 4G, and more...
★ Multi-Languages System
★ Removed Knox And Fota Client
★ Fstrim Command On Every Boot
★ Logs Cleaner On Every Boot
★ Sqlite Optimization On Every Boot
★ Latest SuperSu v2.78
★ Latest Busybox v1.25.1
★ Latest Sqlite3 v3.12.1
Rom Download Link :
https://mega.nz/#!lJQ0UbKJ!tPK1Azpb73Wh811Z-DWQg73v3nUL-Ay4oGtdiPSCNlg
Google Drive Link : https://drive.google.com/file/d/0B6CJegVLkEPdZlQtQ2pFbFluclE/view?usp=sharing
Not Working On my Rom is
* blue light filter
* resolution changing option
* v-gear support
* crying baby sound detector
All this Features dont have A8 So Cant Port.
Flashing Guide Read Carefully After Flash​
Download Rom And Put in SD Card
Reboot To Recovery
Wipe Data ( Need Clean Installation For Better Result)
select A8 Port Rom Zip
Flash it
No Kernel Inside (Flash Your Custom Kernel For Your Model)
Flash SuperSu
Reboot And Be Patient For 10 Minutes for Boot Up
Enjoy.( ReFlash Rom Can Wipe Your Data Be careFull For What You're Doing)
Stable Rom Date : Sun,13 November
Thank You Section​1 Thank You To All Users ( For Support)
2 Thank You @Chainfire (For supersu)
3 Thank You to All Dev (For port Kernel)
4 others Dev ( For respect them Work )
5 sorry If I Forget to mention anyone.
CREDIT​
It's Me Sugar (@bunty_parona)
Joseph Adam (My Brother For Hard Work and make it Possible)
Mr Hai (@haifish9999 For Aod Brightness Fix And Help Me for Port)
Alexis (@Alexisxda For inspiration And Guide)
Yaseen (@zyasin for testing Rom and Help to make rom Mirror)
To All S6 And S6 edge User Thank You..
I Hope Guys You Like My Work..​
If You Have Any Trouble Come Join Us on My Group
All are friendly To help EachOther
https://telegram.me/joinchat/CaccS0FaRRqAIH4jE0Sk4Q
ONCE AGAIN THANK YOU AND SORRY For Last Thread Trouble..:fingers-crossed:
Welcome back!!!
Enviado desde mi G-2PW2100 mediante Tapatalk
---------- Post added at 12:46 PM ---------- Previous post was at 12:45 PM ----------
Now what kernel you use by default in the rom?
Enviado desde mi G-2PW2100 mediante Tapatalk
jong84 said:
Welcome back!!!
Enviado desde mi G-2PW2100 mediante Tapatalk
---------- Post added at 12:46 PM ---------- Previous post was at 12:45 PM ----------
Now what kernel you use by default in the rom?
Enviado desde mi G-2PW2100 mediante Tapatalk
Click to expand...
Click to collapse
No kernel Inside You Have To Flash Custom Port Kernel.? sorry for Trouble Sir.
Great rom! Is it possible to get center cloc k and 3 minit battery?
Sent from my SM-A810F using XDA-Developers mobile app
TommiP77 said:
Great rom! Is it possible to get center cloc k and 3 minit battery?
Sent from my SM-A810F using XDA-Developers mobile app
Click to expand...
Click to collapse
Still i didnt have but You have To wait For it while i have time i will Do it.
Blue filter available?
Sent from my SM-N930F using XDA-Developers mobile app
Titosilva said:
Blue filter available?
Sent from my SM-N930F using XDA-Developers mobile app
Click to expand...
Click to collapse
NO
Great work, tried your rom with the restricted kernel tn (from previous thread), and so far working great. One question please to make sure before turning on encryption. Do you think encryption will work normally without any problem if turned on ?
tarekkkkk said:
Great work, tried your rom with the restricted kernel tn (from previous thread), and so far working great. One question please to make sure before turning on encryption. Do you think encryption will work normally without any problem if turned on ?
Click to expand...
Click to collapse
Now, I'm not 100% or even 75% on this, but I believe I read somewhere for encryption to work properly you need to use a stock kernel or not be rooted? If not setup correctly on reboot, it wouldn't start and go into a bootloop.
Like I said, not positive, just putting that out there so can be aware there may be some further research needed before attempting.
Good luck and for future users benefit, if you find info or do get it working, just post a quick reply here so others can gain from you work!
Which kernel can be used. Tried arter v.22 which doesn't boot....
stangdriver44 said:
Now, I'm not 100% or even 75% on this, but I believe I read somewhere for encryption to work properly you need to use a stock kernel or not be rooted? If not setup correctly on reboot, it wouldn't start and go into a bootloop.
Like I said, not positive, just putting that out there so can be aware there may be some further research needed before attempting.
Good luck and for future users benefit, if you find info or do get it working, just post a quick reply here so others can gain from you work!
Click to expand...
Click to collapse
Just turned encryption on, since I depends on it for security in case phone Lost. The good news it rebooted just fine and encryption is working without any problem.
Rom:this Rom
Kernel:tn2009 2.1
Mods: xposed (apm+; bootmanager; gravitybox;whatsapp extensions; xtouchwiz) + viper + supers 2.78sr3 + adblock
Encryption: working
Thanks @op
foeti said:
Which kernel can be used. Tried arter v.22 which doesn't boot....
Click to expand...
Click to collapse
Arter v22 for note 7 port
Arter97.com u can find all work
tarekkkkk said:
Just turned encryption on, since I depends on it for security in case phone Lost. The good news it rebooted just fine and encryption is working without any problem.
Rom:this Rom
Kernel:tn2009 2.1
Mods: xposed (apm+; bootmanager; gravitybox;whatsapp extensions; xtouchwiz) + viper + supers 2.78sr3 + adblock
Encryption: working
Thanks @op
Click to expand...
Click to collapse
I didnt ever try that thing and no idea about it. M sorry ..
stangdriver44 said:
Now, I'm not 100% or even 75% on this, but I believe I read somewhere for encryption to work properly you need to use a stock kernel or not be rooted? If not setup correctly on reboot, it wouldn't start and go into a bootloop.
Like I said, not positive, just putting that out there so can be aware there may be some further research needed before attempting.
Good luck and for future users benefit, if you find info or do get it working, just post a quick reply here so others can gain from you work!
Click to expand...
Click to collapse
Thank u for replying and make us understand.
Really good Rom! Good batterylife an fast as hell.
fattony83 said:
Really good Rom! Good batterylife an fast as hell.
Click to expand...
Click to collapse
Thank u so much for lovely feedback
Next build ia more powerful than this
Hi! Excellent rom, mate! Just one question...Is your rom compatible with AlixisXDA sound booster?
Sent from my SM-A810F using XDA-Developers mobile app
raphaelrossi6 said:
Hi! Excellent rom, mate! Just one question...Is your rom compatible with AlixisXDA sound booster?
Click to expand...
Click to collapse
I didnt try but u can give it try
But backup ur system 1st
Otherwise reflash rom make ur wipe data and u lost applications and i dont want this thing happn to u
I recommend to use viper its best u can see here viper setting mine screenshotare there
http://forum.xda-developers.com/galaxy-s6/development/a8-fast-stable-rom-v2-smooth-amazing-t3498398
@bunty_parona thank you mate for the quick reply...i will do this later and post the result here. Thank you!
Sent from my SM-A810F using XDA-Developers mobile app
raphaelrossi6 said:
@bunty_parona thank you mate for the quick reply...i will do this later and post the result here. Thank you!
Click to expand...
Click to collapse
Ok sure.

[Rom] [Stock] [debloated] [Non Rooted] for SM-T350 7.1.1 Ghost Project (updated)

Update: 10/26/2017 I am moving any further development of Ghost Project Roms to Google Plus Community here
https://plus.google.com/communities/101940281883070515657
I have a non rooted build on my Google Plus community. I left it non rooted so you could use Substratum for Samsung. If you want root just flash Magisk 14.3.
Links are also in the 3rd post. But I am only doing questions from Google Plus.
*******I highly recommend that you run my first build V.1 as it is the best of all of the builds and has the best battery life. But for those of you that really need that security update, I will continue on and try to get this tho run at least to my expectations. Once there, I will re-post the link after it is running better.
The download links and further information are in the second post. http://forum.xda-developers.com/showthread.php?p=70332239
[Rom] [Stock] [Rooted] [Deodexed] [Debloated] [TWRP Flashable Zip] [SM-T350]
I am not a developer. I am an Android enthusiast who, with the help of a few awesome tools, some reading and from a couple of great devs, I was able to build a custom rom from a stock firmware release.
I have been running it now for about 3 weeks and battery life is awesome. I left in just enough Samsung apks too call it a stock rom but not so many to cause it to lag.
I thought that since it was running so nice, I would share it with you. So, without further ado, this is "Ghost Project" rom for the Galaxy Tab A SM-T350 made from (T350XXU1BPE3) stock firmware.
Thanks To:
II am not a developer..... Let me make this clear.. Lol.. I am not a developer. But I did use an awesome tool that allowed me to make this rom "SuperR Kitchen" .... http://forum.xda-developers.com/chef-central/android/kitchen-superrs-kitchen-t3202296/page26
So first and foremost a big thanks goes out to this developer for this awesome tool.
I would also like to give props to Samsung and Sammobile.com for the firmware.
The kernel is from http://forum.xda-developers.com/galaxy-tab-a/development/kernel-galaxy-tab-sm-t555-5-8-2016-t3433560 and is a stock, permissive kernel. By "[ashyx, http://forum.xda-developers.com/member.php?u=4899305 Recognized Contributor]" another awesome dev. This is a stock kernel in every respect with SElinux set to permissive. Please make sure to stop by and thank him as he does some brilliant work and if you like his work dont hesitate to donate to him. This is our only custom kernel for this tablet. Thank you sir for your awesome work.
I would also like to thank and give props to"{FankieT} of {R3Ds themes and Development}" https://plus.google.com/communities/102477541363210451018 for all of his help and guidance. He was who got me started into Linux through Ubuntu and spent many hours teaching this old dog the ways of Android development. You can teach an old dog new tricks..lol
Big thanks to "[ @cbtc https://forum.xda-developers.com/member.php?u=7546403 ]" for his help with some knox questions related issues.
Rom Details:
Use at your own risk. ********You have been warned..*********
Features:
1. Rooted
2. Busybox installed
3. Debloated
4. Zip aligned
5. Deodexed
6. Removed Kies
7. Permissive stock kernel
8. Knox removed
9. Added ES File explorer
10 .Added Nova Launcher
11 .Latest Google Keyboard
And a few other small changes here and there but basically a stripped stock experience.
Kernel:
Here is a link to the kernel developer's thread, who is another awesome dev, who's kernel is the heart of this rom.
http://forum.xda-developers.com/gal...el-galaxy-tab-sm-t555-5-8-2016-t3433560/page8
By "[ashyx, Recognized Contributor]" This is a stock kernel in every reguard with SElinux set to permissive.
A few other small things here and there but mostly stock.
-This is a flashable zip using TWRP recovery and I highly recommend the 2.8.7.0 build as apposed to the 3.0.2.0 build. That is what works for me, your device may like the newer build of TWRP though.
Link to recovery built by "ashyx" an awesome dev...
http://forum.xda-developers.com/galaxy-tab-a/development/recovery-t3426560/page13
-Since this is a stock rom build, gapps are included so no need to flash any gapps.
#####Flashing instructions#######
###MUST BE ON MARSHMALLOW BUILD ****T350XXU1BPE3******#######
So, if you are on a lollipop build (5.0.1) you need to update to 6.0.1 and have TWRP installed........
1. Make a backup onto your external SD card or on a PC using TWRP recovery. This is a very important step as things do go wrong. You have been warned.
2. Wipe. I recommend a clean install with all 4 major wipes done (system, Cache, Dalvik Cache and Data)
3. Flash "Ghost Project v1.0 6.0.1 t350" rom zip.(or which ever one you decide from the list)
4. Wipe both Cache and Dalvik Cache
5. Reboot to system and profit.
The first boot will take a long time to boot. Put the device down and walk away until it boots (could take up to 15 minutes ) but most likely around 7 to 10 minutes. That is because all files are deodexed.
After it boots up Go ahead and set up the device the way you like it and enjoy.
I also have a Google Plus Communitee Called "Hayes Tech Rom Reviews" where you can go to watch reviews/overviews of custom roms for many devices that I own. I have about 20 to 25 devices now and try to do reviews on all the diferent roms out for them. I also have awesome links like the 3Minit battery mod by{made by "gharrington"} for the Nexus 6 and many more things. Please feel free to stop by.
https://plus.google.com/communities/109262972011341635244
**LAST BUT NOT LEAST****USE AT YOUR OWN RISK**
Warning, I am not a developer. All I am doing is sharing my personal build. I am not nor will I be responsible for anyone ruining your device. Thermonuclear war or Loss of job from device not working is your responsibility. And above all this zip will void your warranty.
I can't think of anything else..lol.. This is the first for me so be easy on me. I am going to try to add more custom features and may even add a pure stock rom for total stock experience, let me know... Enjoy.
A video review of my rom... Go here if you would like to see it
https://youtu.be/dVnx709LO7Y
I built another rom for those that want the stock experience but still want it rooted and Knox removed. It is also Zip Aligned and is running the same permissive kernel for Xposed Mods to work better with it. Knox was removed but it is still in the settings menus. I will fix this soon and up!oad another build with that fix.
All downloads with pefix (v.X) are build from same firmware T350XXU1BPE3 When Samsung releases another update the prefix will change to (v1.X).
Download Rom (AFH)
Ghost Project v.1 6.0.1 t350
https://www.androidfilehost.com/?fid=673368273298916139
Ghost Project v.2 6.0.1 t350
https://www.androidfilehost.com/?fid=457095661767126203
Ghost Project v.3 6.0.1 t350
https://www.androidfilehost.com/?fid=457095661767126654
Ghost Project V1.2 6.0.1 t350 Built with latest update T350XXU1BPK2/T350XAR1BPK2
(Comming)
Stock/Rooted/No Extra Apps Added (Stock Samsung Experience)
https://www.androidfilehost.com/?fid=385035244224406713
Stock Firmware flashable with Odin
https://www.androidfilehost.com/?w=files&flid=154234
Xposed Installer Zips (For Samsung Devices) By[" http://forum.xda-developers.com/member.php?u=3562083 "] wanam, Recognized Contributor. You can find his thread here
http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
Here is my favorite source for custom wallpapers. There are an awesome assembly of some of the best wallpaper designers around.
https://plus.google.com/communities/117666521324982773368
"Chance Favors the Prepared"
Update build: 02-14-2017 Ghost Project V1.2 SM-T350 6.0.1 Built from the Sammobile.com firmware update T350XXU1BPK2/T350XAR1BPK2 with the November security update. This is the latest USA update that I can find. You must be on the T350XAR1BPK2 stock firmware ( flashed with Odin) before flashing this rom. I used TWRP 3.0.2.1 by " @ashyx "
Link to TWRP 3.0.2.1 @ashyx" The builder of this recovery. Make sure to thank him because with out this recovery, we have no way to flash our customs roms with.
http://forum.xda-developers.com/showthread.php?t=3426560
AFH Download link for Ghost_Project_V1.2_SM-T350_6.0.1
https://www.androidfilehost.com/?fid=673368273298931785
To install: you must be on Firmware package T350XXU1BPK2 before flashing this rom. This is the firmware link
https://www.androidfilehost.com/?w=files&flid=154234
You need to install the firmware (unless you are already on this build) with Odin.
Then install TWRP 3.0.2.1 ****DO NOT LET TWRP INSTALL SUPERSU********
Then wipe system, cache, delvic cache and data.
Flash Ghost Project V1.2 SM-T350 6.0.1
Boot to system and enjoy.
After first boot to can flash the "Wanam version of Xposed" in TWRP if you want to use the installed Xposed installer app that I included with this rom.
links to this zip are in the first post.
Do not use any advanced reboot apps to boot to recovery. This may or may not cause you to get stuck in recovery and will not let you boot to system. If this happens to you, don't frett, just power off the device, push power+volume down+home and boot to "Download Mode". Once device load Download screen, press volume up to enter Download mode and plug in the device to your PC. Open Odin and flash TWRP again with auto reboot ticked on in options tab. Your device will then boot to system, after done flashing TWRP. The flags should now be reset to kernel again and you should be good to go once again.
I'm not sure why it does this but it only does with the 3.0.2.1 version of TWRP for this device. The Lollipop version I have had no issue with. But I had issues trying to flash this rom with the older TWRP so I used the 3.0.2.1 version.
If you don't want the Xposed app, just install your favorite system app remover and uninstall it. I use the app so that is why I pre installed it for you all.
The kernel in this rom is pure stock that was supplied in the firmware update. So the kernel source is plain stock Samsung. I tried @ashyx" permissive kernel http://forum.xda-developers.com/showthread.php?t=3433560 with this build and couldn't get my device to boot. Your device may fair better. If it dies with for you, be sure to head over to his thread and give a small donation or at the least thank him.
*****UPDATE*****
Updated to April security patch. Must flash the stock firmware first via Odin. Then re-flash TWRP via Odin. Make sure when flashing TWRP that you have auto reboot turned off in Odin options. After TWRP flash is done, hold Home, volume up and down, and power button till device powers off. Keep holding all buttons except for the volume down and once the device comes to life, let go of the power button and after about 1.5 seconds let go of the jome and volume buttons. You should then boot into TWRP.
I I highly recommend that you do not use any apps to reboot to recovery or you could go into a recovery loop. If that happens you need to reflash TWRP via Odin following the instructions provided above.
This rom is prerooted so you do not have to flash superSu. Also, you need to give it at least 10 to 15 minutes for the first boot.
Have fun and as always this is as is and use at your own risk.
Sorry all, I pulled the build until I can get it running a little smoother. If I don't like the way it runs than I'm not going to give it out to others
I am leaving the firmware link up in case you want to update to the newest build through Odin though but it is unaltered and is straight samsung with no root. Completely stock and not flashable with TWRP.
As soon as I get it running smoothly, I will post the link again
Stock firmware: XAR-T350XXU1BQD1 must flaw using Odin (not a TWRP flashable zip) (completely stock with stock recovery)
https://www.androidfilehost.com/?fid=745425885120730076
md5 75a628efc51737cb328207cadd7977a2
GhostProject_v5.0_ SM-T350_6.0.1 (will repost link once it is running better)
"Chance Favors the Prepared"
GhostProject SM-T350 7.1.1 (stock) (debloated) (knox removed) (zipaligned) (non rooted) (T350XXU1CJ1_XAR)
Again, let me make this clear because the is this one dude it there accusing me if stealing from Samsung. I am not a developer. This is a TWRP flashable stock firmware update to 7.1.1 (latest release). All I did (for now) was to lighten the app load and allow it to be flashed via TWRP. I will be trying to deodex it and strip it even more as time goes on.
All my Thanks goes out to all the same people as in the first post. This is something anyone could do as long as you are running a Linux distro, have some basic rom construction knowledge and a ton of patience. I used @superR kitchen to do this with too. Here is his work and I highly recommend the donate download as the tools include helps a pile.
https://www.google.com/amp/s/forum....android/kitchen-superrs-kitchen-t3202296/amp/
I left root out because a lot of you don't use root for various reasons. If you want root, flash Magisk 14.3.
Must be on the stock firmware (flashed via Odin) first, them but to system. After you boot to system and unlock developer options and USB debugging, boot into bootloader mode again and install TWRP via Odin. In Odin options uncheck "auto reboot to system" when the recovery is done flashing (takes about 1 second) reboot into recovery from the download screen. That locks in TWRP recovery.
You can now make a backup and then flash GhostProject and Magisk 14.3 (if you want root). I will be working on this to trim it down the way I like it but if you like it close to stock than v5.0 if the rom you need.
I will not support questions here. Hi to my Google Plus community for that.
AFH link to stock firmware (T350XXU1CJ1_XAR)
https://androidfilehost.com/?fid=745849072291683960
AFH link to GhostProject SM-T350 v5.0
https://androidfilehost.com/?fid=673791459329056605
"Chance Favors the Prepared"
Palpal link
For those of you that want to make a small donation, I have decided to post my Paypal.me link. It was requested by a few of you and thank you much to those that have donated. Now, donations are not expected or needed to use anything I make and post to the public. But because of my situation lately I decided to go ahead and publicly post this link. Thank you in advance.
https://www.paypal.me/Glockman4519
"Chance Favors the Prepared"
glockman4519 said:
Some screens
Apparently, A there is something up with XDA's servers because I can't seem to get these screen shots uploaded. I will post a Google Drive link with them so you can see them if you want.
https://drive.google.com/folderview?id=0ByTpk6hgHRa5bS1uR3dySExPODg
"Chance Favors the Prepared"
Click to expand...
Click to collapse
Thanks for the updated version of Ghost SM-T350 rom but can you upload v2 on Google Drive? Apparently, I can't access AFH on my school laptop as they have blocked it as a local block website. So if you can upload Ghost v2 on Google Drive by tonight or tomorrow, I would appreciate it.
Thanks.
New update to my Ghost Project builds of stripped down stock firmware. I have stripped it about as far as I am going to go with it so the rom stays dependable. I also removed the ES File Explorer and Nova Launcher apks. I left in the Google Keyboard though as I think it is just a better keyboard.
I am going to build one with root as systemless next for those seeking that want root that way.
AFH download links in the OP.
"Chance Favors the Prepared"
ParadoXGodzillA said:
Thanks for the updated version of Ghost SM-T350 rom but can you upload v2 on Google Drive? Apparently, I can't access AFH on my school laptop as they have blocked it as a local block website. So if you can upload Ghost v2 on Google Drive by tonight or tomorrow, I would appreciate it.
Thanks.
Click to expand...
Click to collapse
Here is the link to my Ghost Project Google Drive shared folder. It has v.1 and v.3 in it.
https://drive.google.com/folderview?id=0ByTpk6hgHRa5X3g5VnBVam9OaDQ
"Chance Favors the Prepared"
glockman4519 said:
Here is the link to my Ghost Project Google Drive shared folder. It has v.1 and v.3 in it.
https://drive.google.com/folderview?id=0ByTpk6hgHRa5X3g5VnBVam9OaDQ
"Chance Favors the Prepared"
Click to expand...
Click to collapse
Thanks.
@glockman4519 I just wanted to take a minute and say thank you so much for this ROM. I appreciate all your hard work. I am so happy to FINALLY find a ROM with bloatware removed and with awesome battery life. My deepest thanks to you. I will follow this thread for any updates. Keep up the GREAT work!
alias4ever said:
@glockman4519 I just wanted to take a minute and say thank you so much for this ROM. I appreciate all your hard work. I am so happy to FINALLY find a ROM with bloatware removed and with awesome battery life. My deepest thanks to you. I will follow this thread for any updates. Keep up the GREAT work!
Click to expand...
Click to collapse
You are very welcome. I'm glad that it is working out for you.
glockman4519 said:
You are very welcome. I'm glad that it is working out for you.
Click to expand...
Click to collapse
It is working very well and after a few days use of it I can't believe the battery life on this ROM! WOW! A HUGE thumbs UP! :good::highfive:
Installation?
Hey,
I tried to flash it and nothing happened, operator error I believe . Does the build have to be T350XXU1BPE3 or can it be an updated Marshmallow build? Like to flash your V.3 could I have the latest firmware or would I have to flash (odin) that specific build?​~Thanks, C
Edit: I beat you to it, I read the first couple of paragraphs at the beginning of you OP again. You clearly said it was built from/for T350XXU1BPE3. Sorry for breaking my own rule...
ConnerJSP said:
Hey,
I tried to flash it and nothing happened, operator error I believe . Does the build have to be T350XXU1BPE3 or can it be an updated Marshmallow build? Like to flash your V.3 could I have the latest firmware or would I have to flash (odin) that specific build?
~Thanks, C
Edit: I beat you to it, I read the first couple of paragraphs at the beginning of you OP again. You clearly said it was built from/for T350XXU1BPE3. Sorry for breaking my own rule...
Click to expand...
Click to collapse
No need for apologies. I'm not a dev and don't mind questions. But as you found out, you do need to have the latest or the firmware that I posted, already installed via Odin. It's a Samsung thing. Lol... Hope v3 is working good for you. : )
glockman4519 said:
No need for apologies. I'm not a dev and don't mind questions. But as you found out, you do need to have the latest or the firmware that I posted, already installed via Odin. It's a Samsung thing. Lol... Hope v3 is working good for you. : )
Click to expand...
Click to collapse
Yes I did find out. So I successfully flashed it and it is really great work, nice job! My only concern is the outdated android security patch level, which is to be expected since the ROM is based off an old build. Do you have intentions on updating that?
ConnerJSP said:
Yes I did find out. So I successfully flashed it and it is really great work, nice job! My only concern is the outdated android security patch level, which is to be expected since the ROM is based off an old build. Do you have intentions on updating that?
Click to expand...
Click to collapse
As soon as Samsung releases a security update. You know how Samsung is with updates.
I also have a build with Magisk systemless root that I will upload later. If anyone wants to use Magisk as apposed to SuperSu
glockman4519 said:
As soon as Samsung releases a security update. You know how Samsung is with updates.
I also have a build with Magisk systemless root that I will upload later. If anyone wants to use Magisk as apposed to SuperSu
Click to expand...
Click to collapse
When I flashed the V.3, I recall it having May 1, 2016 patch level. The latest update has November 1, 2016. Is that what you mean, or some source code they haven't put out yet? And I looked up what Magisk s but didn't really understand it... What would be the advantages of using it over SuperSU?
Edit: I just reflashed V.3 and noticed that it was using the build one of your ROM and the installer for Ghost Project v1 6.0.1 installer. Is this using the wrong version or is that supposed to say that? (See photo)
Update: Well, confirmed build is V.3. Must have just been displayed incorrectly. Nonetheless, working flawlessly.
ConnerJSP said:
When I flashed the V.3, I recall it having May 1, 2016 patch level. The latest update has November 1, 2016. Is that what you mean, or some source code they haven't put out yet? And I looked up what Magisk s but didn't really understand it... What would be the advantages of using it over SuperSU?
Edit: I just reflashed V.3 and noticed that it was using the build one of your ROM and the installer for Ghost Project v1 6.0.1 installer. Is this using the wrong version or is that supposed to say that? (See photo)
Update: Well, confirmed build is V.3. Must have just been displayed incorrectly. Nonetheless, working flawlessly.
Click to expand...
Click to collapse
I never got around to changing the info in the build prop. V3 is just the latest in evelutions of my builds. It is still same firmware base as V.1 when I see a later version of samsungs firmware build showing, I will update this and the build number system will change to v1.1. As for Magisk, it was requested by a few people and from what I was told, they were having issues getting it to work with this tablet. I got it working. It still does not pass safety net though. I dont think it is going to that easy to byoass the safety net and still be rooted.
All my rom does is take the stock firmware and reliably debloat it enough to give you an outstanding battery experience. Thats it. There were no custom roms out for this device, when I started this project, and that is the only reason that I am sharing this. There is another great rom out now called "Fenix rom" so maybe I will see where his rom goes. It looks good.
As I stated earlier. i am not a developer. I understand a lot that goes into a rom and how to get it. But I am basing my builds on firmware releases from Samsung and untill Samsung releases another update, my hands are tied.
Thank you for the feedback.
"Chance Favors the Prepared"
Hey,
I'm looking forward to the inclusion of Magisk, I'm currently using a custom ROM that has it preinstalled. Wasn't sure how to use it at first but I see it mainly as an all around manager, and acts likes Xposed with the modules.
With that said, will you be using Chainfire's SuperSU or phh's superuser for the root (systemless?)?​Cheers, CJSP
ConnerJSP said:
Hey,
I'm looking forward to the inclusion of Magisk, I'm currently using a custom ROM that has it preinstalled. Wasn't sure how to use it at first but I see it mainly as an all around manager, and acts likes Xposed with the modules.
With that said, will you be using Chainfire's SuperSU or phh's superuser for the root (systemless?)?​Cheers, CJSP
Click to expand...
Click to collapse
Not yet mate. I'm trying to find a workaround for this. There might be other posts on XDA that might help you.
ConnerJSP said:
Hey,
I'm looking forward to the inclusion of Magisk, I'm currently using a custom ROM that has it preinstalled. Wasn't sure how to use it at first but I see it mainly as an all around manager, and acts likes Xposed with the modules.
With that said, will you be using Chainfire's SuperSU or phh's superuser for the root (systemless?)?​Cheers, CJSP
Click to expand...
Click to collapse
I tried several times, several different ways but still can't get it to install on the initial install. This is more than my skills can figure out...Lol... I'm done with Magisk for a while on this device. It's an issue in the installer script I think.
"Chance Favors the Prepared"

[Rom] [Kernel] [C9LTECHN/C9000] [M] Stock rooted debloated deodexed [NOV/21/2017]

This is a stock rom that is debloated , deodexed and rooted. It is for C9LTECHN (SM-C9000). Just flash in twrp and reboot.
Marshmallow Android 6.0.1
C9000ZHU1AQK1_DeOdex: https://www.androidfilehost.com/?fid=745849072291690211
Kernel V3.3.1: https://www.androidfilehost.com/?fid=817906626617944696
Xposed Framework: https://www.androidfilehost.com/?fid=673368273298981051 and https://www.androidfilehost.com/?fid=745425885120757828
If you want to go back to stock QK1 kernel https://www.androidfilehost.com/?fid=817906626617948244
Rom Bugs:
Fingerprint - Only if a custom kernel is installed.
Kernel Features:
Installs SuperSU
Permissive
Added IO BFQ Scheduler
Disabled DM_VERITY
Disabled Forced File Encryption
Disabled KNOX
Disabled TIMA
Disabled RKP
Disabled KAP
Disabled Secure Storage
Enabled CIFS Filesystem Support
Enabled NFS Filesystem Support
Enabled NTFS Support
Increase Battery Charging Levels
Fsync Toggle (Enable/Disable)
Wifi driver updated to LA.BR.1.3.6_rb1.22
Kernel Patched up to 3.10.107
Mild undervolt for our cpu and gpu
Use all cores to boot
CVE Patches updated as of Oct/2017
Kernel source and change-log: https://github.com/travismills82/c9lte-kernel/tree/Touchwiz-Marshmallow
Modem and Bootloader C9000ZHU1AQK1: https://www.androidfilehost.com/?fid=962021903579496076
In case wifi is not enabling unpack modem and bootloader and flash via Odin.
Clean rom, excellent choice of debloat apps.
Thanks
Sent from my SM-T719 using XDA-Developers Legacy app
kernel booting now working on permissive and fixing wifi Than we can get down to cve patching and overall features and improvements. :good:
travis82 said:
kernel booting now working on permissive and fixing wifi Than we can get down to cve patching and overall features and improvements. :good:
Click to expand...
Click to collapse
WOW! finally a decent rom + great developer for C9 PRO
Cheers everyone! thank you @travis82
@travis82
Great job indeed..actually I'm a c900f (indian varient ) owner but still feeling happy ..
Sir can you make a debloated rom for our varient or atleast guide which apps can be removed without breaking the functionality of rom..i just use screen mirroring out of samsung rom's features
Congratulations on your development..
Sent from my SM-C900F using XDA-Developers Legacy app
---------- Post added at 09:38 PM ---------- Previous post was at 09:37 PM ----------
aftermath85 said:
WOW! finally a decent rom + great developer for C9 PRO
Cheers everyone! thank you @travis82
Click to expand...
Click to collapse
Are you using c9000 or c900f ? Is this rom flashable on our c900f ?
Sent from my SM-C900F using XDA-Developers Legacy app
Awesome
I flashed this rom. believe it is beyond what is said about it. It is absolutely amazing. everything works perfectlyyyyyyy
---------- Post added at 05:37 PM ---------- Previous post was at 05:15 PM ----------
I flashed this rom. believe it is beyond what is said about it. It is absolutely amazing. everything works perfectlyyyyyyy
Great thank you very much
travis82 said:
This is a stock rom that is debloated rooted. It is for C9LTECHN (SM-C9000). Just flash in twrp and reboot. Done.
Download link: https://www.androidfilehost.com/?fid=745425885120752723
Click to expand...
Click to collapse
Great work please make volte support thank you :good::good::good::good::good:
volte works for me. It doesn't work on your SM-C9000? Also if there are any experienced developers I want help with LineageOS. So get a hold of me if you have experience with AOSP developing. I don't want to be solo again like on S7 Edge. It was very exhausting and one of the main reasons I switched phones.
i can not mount data, i am using the latest twrp you @travis82 have posted,
is it ok to flash this rom without wipe? thanks
aftermath85 said:
i can not mount data, i am using the latest twrp you @travis82 have posted,
is it ok to flash this rom without wipe? thanks
Click to expand...
Click to collapse
can't mount data cuz you need to format data. TWRP doesnt support samsung encryption currently. So you HAVE to format data to unencrypt.
Format data, install dm variety, reboot to recovery, install rom
ROM COOK
rom development is easy but solving bugs is like taking a climb to mountain kilmanjero
aftermath85 said:
WOW! finally a decent rom + great developer for C9 PRO
Cheers everyone! thank you @travis82
Click to expand...
Click to collapse
Well I have kernel and recovery building in lineage OS 14.1. System is next. Code is uploaded to my GIT so anyone with experience feel free to help out.
travis82 said:
can't mount data cuz you need to format data. TWRP doesnt support samsung encryption currently. So you HAVE to format data to unencrypt.
Click to expand...
Click to collapse
I see, thanks! I already flashed the rom, its awesome!!!
I have the encryption setup but i have to debug to make sure its picking up drm and maybe update the files in twrp for encryption. I'll get to it eventually its not on my important list currently.
Screen on time what are you guys getting vs 100% stock?
Mobile hotspot won't turn on anymore after flashing this ROM.
I've already tried wiping cache and network settings reset.
travis82 said:
Screen on time what are you guys getting vs 100% stock?
Click to expand...
Click to collapse
Will observe, but definitely this ROM is much better than the 100% stock.. even when sleep it does not drain much.
Lineage tree build-able now
Well I said I would do it. Now if OTHER devs from the indian variant would actually chip in and help and not WATCH.... hint hint dev you know who I am talking about, progress would be crazy fast. So you guys owning indian variant I suggest you get on to the other devs to help out.
Dinner time so see ya all later.
Thanks for develop this rom and well done.
Thank you very much for developing this rom. It is awesome. However, the wifi is not working. May I know how to fix it?

[TeamExyKings][KERNEL][MM] moonLight-v5 G900H [TOUCHWIZ STOCK&S7+GRACEUX]

Hi all. Im here with my new work "moonLight Kernel"
Firstly thanks to @duki994
Pure stock kernel with great features.
Kernel Features:
- Based on latest Stock Kernel Source
- Linux 3.10.9
- Default 2100 mA Fast Charge
- Brighter Notification Leds and Fade Effect
- Selinux Permissive
- Great RAM management, performance and battery balanced, same as Stock Kernel
This version is for Stock, Stock Based, S7, S5 Neo Port Roms and GraceUX Roms
"Note to developers: About adding features or governors, all helps are accepted."
DOWNLOAD
Instructions:
-Download the boot img
-Go twrp
-Choose the folder which is the boot.img's place you downloaded
-Click flash image button
-Then chose boot.img and flash it.
-If you want root, you can use magisk or supersu
-Then reboot
Kernel Source:
https://github.com/cnkzlyr/moonlight_k3gxx_kernel
Credits:
Thanks to my team TeamExyKings
and @duki994 @cıyanogen @somadsul @yash92duster
and
Samsung
Google
Microsoft Azure
​
Does this kernel in the m&c air rom work?
titan2142 said:
Does this kernel in the m&c air rom work?
Click to expand...
Click to collapse
Sure
cnkzlyr said:
Hi all. Im here with my new work "moonLight Kernel"
Firstly thanks to @duki994
Pure stock kernel with great features.
Kernel Features:
- Based on latest Stock Kernel Source
- Linux 3.10.9
- Default 2100 mA Fast Charge
- Brighter Notification Leds and Fade Effect
- Selinux Permissive
- Great RAM management, performance and battery balanced, same as Stock Kernel
This version is for Stock, Stock Based, S7 and S5 Neo Port Roms. I may make versions for my AOSP other Touchwiz Roms later.
"Note to developers: About adding features or governors, all helps are accepted."
Download Link:
https://androidfilehost.com/?w=files&flid=300131
Ignore version on androidfilehost folder name. It is v3.
Instructions:
-Download the boot img
-Go twrp
-Choose the folder which is the boot.img's place you downloaded
-Click flash image button
-Then chose boot.img and flash it.
-If you want root, you can use magisk or supersu
-Then reboot
Kernel Source:
https://github.com/cnkzlyr/moonlight_k3gxx_kernel
Credits:
Thanks to my team TeamExyKings
and @[email protected]ı[email protected]@yash92duster
and
Samsung
Google
Microsoft Azure
Click to expand...
Click to collapse
Thx, great.. but..... I think i'll wait for AOSP version, dev @cnkzlyr
Honestly, im still enjoying your ViperOS until today..
never gonna back to stock anymore since i've been bitten by that viper ?
gandyprakoso said:
Thx, great.. but..... I think i'll wait for AOSP version, dev @cnkzlyr
Honestly, im still enjoying your ViperOS until today..
never gonna back to stock anymore since i've been bitten by that viper ?
Click to expand...
Click to collapse
:good:
Waiting for AOSP,still in viper os!:laugh:
widowhunter46 said:
Waiting for AOSP,still in viper os!:laugh:
Click to expand...
Click to collapse
??
COME HERE FOR S5 EXYNOS
t.me/TeamExyKings_5422
cnkzlyr said:
Hi all. Im here with my new work "moonLight Kernel"
Firstly thanks to @duki994
Pure stock kernel with great features.
Kernel Features:
- Based on latest Stock Kernel Source
- Linux 3.10.9
- Default 2100 mA Fast Charge
- Brighter Notification Leds and Fade Effect
- Selinux Permissive
- Great RAM management, performance and battery balanced, same as Stock Kernel
This version is for Stock, Stock Based, S7 and S5 Neo Port Roms. I may make versions for my AOSP other Touchwiz Roms later.
"Note to developers: About adding features or governors, all helps are accepted."
Download Link:
https://androidfilehost.com/?w=files&flid=300131
Ignore version on androidfilehost folder name. It is v3.
Instructions:
-Download the boot img
-Go twrp
-Choose the folder which is the boot.img's place you downloaded
-Click flash image button
-Then chose boot.img and flash it.
-If you want root, you can use magisk or supersu
-Then reboot
Kernel Source:
https://github.com/cnkzlyr/moonlight_k3gxx_kernel
Credits:
Thanks to my team TeamExyKings
and @duki994 @cıyanogen @somadsul @yash92duster
and
Samsung
Google
Microsoft Azure
Click to expand...
Click to collapse
@cnkzlyr
Congratz on new project !
Hi @cnkzlyr, my phone keep forget wifi password after every times I restart my phone and stock Samsung Smart Manager app keep saying illegal modify detected and request for restart after I flashed your Moonlight kernel v3 on Stock ROM. Any ideas for fixing that. Thanks
Wings1995 said:
Hi @cnkzlyr, my phone keep forget wifi password after every times I restart my phone and stock Samsung Smart Manager app keep saying illegal modify detected and request for restart after I flashed your Moonlight kernel v3 on Stock ROM. Any ideas for fixing that. Thanks
Click to expand...
Click to collapse
Easy. Modify build.prop change line ro.securestorage.support=true to ro.securestorage.support=false
Ignore about smart manager. Not a problem
Wings1995 said:
Hi @cnkzlyr, my phone keep forget wifi password after every times I restart my phone and stock Samsung Smart Manager app keep saying illegal modify detected and request for restart after I flashed your Moonlight kernel v3 on Stock ROM. Any ideas for fixing that. Thanks
Click to expand...
Click to collapse
Edit line on build prop editor, if im right search ro.securestorage(i forgot what line but its says like secure storage something like that and change true to false. And about smart manager yes its say illegal modify cause smart manager detect knox on samsung when knox is remove some samsung stock app wont be run perfectly,it just my opinion,try clean master is same as smart manager
widowhunter46 said:
Edit line on build prop editor, if im right search ro.securestorage(i forgot what line but its says like secure storage something like that and change true to false. And about smart manager yes its say illegal modify cause smart manager detect knox on samsung when knox is remove some samsung stock app wont be run perfectly,it just my opinion,try clean master is same as smart manager
Click to expand...
Click to collapse
Smart manager is a stock app so I assume we could not get rid of it but it just asking again and again for restart. Very annoying. So how can I turn off its warning or could you show me how to get rid of the app itselfs
Wings1995 said:
Smart manager is a stock app so I assume we could not get rid of it but it just asking again and again for restart. Very annoying. So how can I turn off its warning or could you show me how to get rid of the app itselfs
Click to expand...
Click to collapse
Uninstall it
widowhunter46 said:
Uninstall it
Click to expand...
Click to collapse
Install. Links please!
Монтано said:
Install. Links please!
Click to expand...
Click to collapse
too much vodka or something man?? ??
*The link is on the 1st page
gandyprakoso said:
too much vodka or something man?? ??
*The link is on the 1st page
Click to expand...
Click to collapse
V2 link
---------- Post added at 10:53 AM ---------- Previous post was at 10:53 AM ----------
gandyprakoso said:
too much vodka or something man?? ??
*The link is on the 1st page
Click to expand...
Click to collapse
Need v3 !
Монтано said:
V2 link
---------- Post added at 10:53 AM ---------- Previous post was at 10:53 AM ----------
Need v3 !
Click to expand...
Click to collapse
I need V4
Next?
?
gandyprakoso said:
I need V4
Next?
?
Click to expand...
Click to collapse
Give v3
Монтано said:
Give v3
Click to expand...
Click to collapse
Read description on first page, carefully.. you can translate it with google translate if you dont really understand what it means.. and dont drink too much vodka.. ??

[ROM][G988U/U1/W]SamPWND.R.Official 1CTKH

Hello!
Please forgive me as it's been a long time since I made/posted a stock based ROM as I have been mainly doing security research and dealing more with source code last few years.
Most seasoned Samsung users on here probably already know me and work that I have done so I won't waste time posting any "about me" stuff.
DISCLAIMER:
This ROM is still WIP (although fully functional) and based on Android R Beta 1ZTJG for G988U/U1/W. An unlocked BL is required to flash this ROM! This ROM contains bootloader files specific to U/U1/W so likely will NOT WORK on hk/china/exynos/any other models that are not U/U1/W so don't ask. If you do decide to flash it and try it out and if your device blows up then that is your own fault.
Features:
- Based on Stock R Official Build aka 1CTKH.
- This is a full ODIN flashable tar (got tired of messing with update zips.)
- Disabled vbmeta
- Pretty heavily debloated
- Deknoxed
- Removed pesky recovery-from-boot.p which could cause boot loops.
- Currently only has SPR csc mods (will mod others in next build)
*Native call recording
*App Lock (forgot to push the app though so will fix in next build)
*Few others.. will post more specifics and give creds since I used the csc mod for exynos as a basis..
- Probably forgetting something but thhis is an initial build so will add more as time goes..
Instructions:
- Backup your data if you must since this will wipe device!
- Put phone in dl mode and extract zip to pc somewhere.
- Open ODIN and in AP slot navigate to SamPWND.R.Official-G988U.tar and flash it.
- Device will reboot into stock CTKH recovery where you will wipe data and reboot.
- Set up device and win?
Root Steps (optional):
Note: Custom kernels can be used since source code for R is released.
EDIT: There is now a working recovery which will be available in post 2.
- After you have flashed rom and everything is set up reboot back into DL mode.
- Open included ODIN and in AP slot navigate to the 1BTHD_BL_and_Recovery_For_Root.tar. Make sure auto reboot is NOT selected. Flash it.
- Once thats flashed hold vol down and power until screen turns off then immediately hold vol up and power until LOS recovery loads.
- However you want to flash magisk (I included Magisk.v21.0.zip) flash it.
* I do adb push magisk.zip /... Then select Install Update then install from root and select magisk zip...
- Reboot back into DL mode.
- In ODIN, select AP slot then navigate to 1ZTJG_BL_and_Recovery.tar and flash it.
- Device will boot back into ROM and you will now be rooted!
***TWRP RECOVERY***
- Download listed below
- I suggest you follow all the steps above and make sure it's up and running before installing TWRP.
- Basically extract the twrp download below, create it into a .tar file using 7zip or something and flash it in ODIN.
- adb works
- file manager and other tools work
- If follow above steps first as recommended, data will be decrypted.
- mounts work
- flashing works
- backup/restore works
- no issues found so far?
Steps are really quite simple if you have ever used ODIN.
Latest ROMS can now be accessed here:
ROMS | SamPWND
www.sampwnd.com
I will create a Telegram ROM support group soon where you can ask all the questions you want there (I am not at liberty to discuss unlocking bootloader on XDA so any questions directed towards this or the ROM itself then join the Telegram group for questions and ROM support.)
TELEGRAM ROM SUPPORT GROUP CLICK HERE
ENJOY!
Shout Outs:
@topjohnwu for Magisk of course
@jesec for LOS Recovery
@afaneh92 base TWRP
@Mentalmuso for direction on how to get TWRP to work on R!
More shout outs coming soon!
Downloads will be in post 2.
ROM Updates Are Located Here
SamPWND.R4.v1-G988U1 Download
G988U1-R-TWRP Download
ROM Questions and support and SamPWND support in general if you have ANY questions then join this Telegram Group chat!
CHANGELOG and Other Updates:
12/10/2020
- SamPWND.R.Official-G988U is latest build
- Base updated to 1CTKH Official R
- Same features as original release
- Removed less bloat since some things were broke
- Left csc decoded so you can make your own edits directly without having to decode it and flash it or whatever.
10/31/2020
- SamPWND.R4.v1-G988U1 is initial build/upload
- SamPWND.R4.v1-G988U1.TWRP.Recovery is initial upload for TWRP recovery that works on R firmware
- Added Telegram ROM support link to OP and second post.
Delete..
this is amazing!! hope you do this to the ZTJN build for Snapdragon <3 excellent work on this though , thank you!!
mysticjp said:
this is amazing!! hope you do this to the ZTJN build for Snapdragon <3 excellent work on this though , thank you!!
Click to expand...
Click to collapse
I want something for smg9860
mysticjp said:
this is amazing!! hope you do this to the ZTJN build for Snapdragon <3 excellent work on this though , thank you!!
Click to expand...
Click to collapse
when its released and update.zip is posted sure
bodomfan said:
I want something for smg9860
Click to expand...
Click to collapse
i dont own that model.. i dont like releasing for devices i cant test or troubleshoot issues on.
ZTJQ is latest =o
*prays* for this stock rom/firmware modicification and enchancement.. for the current build
g988u1 BTIG https://drive.google.com/u/0/uc?export=download&confirm=BReC&id=1nZQ6Qr_C4Yx5SroJey02rob_En2HX3Ge
988U1-BTIG to ZTJA.zip https://1drv.ms/u/s!AmeN999T4X8UhP07wOFGOhRmsW0zMw?e=Qabkdx
988u1-ztja.To.Ztjg https://1drv.ms/u/s!AmeN999T4X8UhP061TYuDPuYN3Bqwg?e=UaZlIs
G988U1 Beta 3, ZTJG To ZTJQ https://1drv.ms/u/s!AmeN999T4X8UhP4NKKEqVocq_6siIg?e=hamgdf
mysticjp said:
ZTJQ is latest =o
*prays* for this stock rom/firmware modicification and enchancement.. for the current build
Click to expand...
Click to collapse
yes i know.. im a busy person lately lol im already working on it tho
mysticjp said:
g988u1 BTIG https://drive.google.com/u/0/uc?export=download&confirm=BReC&id=1nZQ6Qr_C4Yx5SroJey02rob_En2HX3Ge
988U1-BTIG to ZTJA.zip https://1drv.ms/u/s!AmeN999T4X8UhP07wOFGOhRmsW0zMw?e=Qabkdx
988u1-ztja.To.Ztjg https://1drv.ms/u/s!AmeN999T4X8UhP061TYuDPuYN3Bqwg?e=UaZlIs
G988U1 Beta 3, ZTJG To ZTJQ https://1drv.ms/u/s!AmeN999T4X8UhP4NKKEqVocq_6siIg?e=hamgdf
Click to expand...
Click to collapse
dont really need this posted in here lol might confuse ppl plus theres already a thread dedicated to updates whereas this is my custom rom thread
oh im sorry, how does one delete their own post?
mysticjp said:
oh im sorry, how does one delete their own post?
Click to expand...
Click to collapse
You can't delete it but you can edit it.
i cant edit that post with the links, theres no edit button
mysticjp said:
i cant edit that post with the links, theres no edit button
Click to expand...
Click to collapse
its all good lol. not a lot of traffic here anyways.. just dont want ppl askin for support on doing ota updates lol
reply..
lol true , cant wait for yor ZTJQ 988u1 enhanced stock firmware rom release..
---------- Post added at 10:08 AM ---------- Previous post was at 10:07 AM ----------
i kno it is not yor only function in life but i just am yerning for it before theres a newer build :gryn:
mysticjp said:
lol true , cant wait for yor ZTJQ 988u1 enhanced stock firmware rom release..
---------- Post added at 10:08 AM ---------- Previous post was at 10:07 AM ----------
i kno it is not yor only function in life but i just am yerning for it before theres a newer build :gryn:
Click to expand...
Click to collapse
i got it built but found a few issues.. i overdid it lol gotta fix usb debugging and fstab
mysticjp said:
g988u1 BTIG https://drive.google.com/u/0/uc?export=download&confirm=BReC&id=1nZQ6Qr_C4Yx5SroJey02rob_En2HX3Ge
988U1-BTIG to ZTJA.zip https://1drv.ms/u/s!AmeN999T4X8UhP07wOFGOhRmsW0zMw?e=Qabkdx
988u1-ztja.To.Ztjg https://1drv.ms/u/s!AmeN999T4X8UhP061TYuDPuYN3Bqwg?e=UaZlIs
G988U1 Beta 3, ZTJG To ZTJQ https://1drv.ms/u/s!AmeN999T4X8UhP4NKKEqVocq_6siIg?e=hamgdf
Click to expand...
Click to collapse
so I just flash BTIG and then flash the rest in stock recovery right?
Smartphones13 said:
so I just flash BTIG and then flash the rest in stock recovery right?
Click to expand...
Click to collapse
No that content is not meant for this page

Categories

Resources