I recently rooted my phone. Was going good until I softbricked it by editing 1 build prop setting. WARNING: Sprint users, I highly recommend you not modify build prop settings after rooting. Anyway I can get into download, recovery, and factory reset, but none of it works. I have tried almost everything, lg flashtool 1.8 works till 93%, phone reboots, Flashtool then says usb open port fail. factory reset fails. Can't try newer flashtool 2014, because of no kdz file. If there is away to convert .tot to kdz any help would be greatly appreciated. Attached is the blue screen that comes up.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
joeyhdownsouth said:
I recently rooted my phone. Was going good until I softbricked it by editing 1 build prop setting. WARNING: Sprint users, I highly recommend you not modify build prop settings after rooting. Anyway I can get into download, recovery, and factory reset, but none of it works. I have tried almost everything, lg flashtool 1.8 works till 93%, phone reboots, Flashtool then says usb open port fail. factory reset fails. Can't try newer flashtool 2014, because of no kdz file. If there is away to convert .tot to kdz any help would be greatly appreciated. Attached is the blue screen that comes up.View attachment 2902177
Click to expand...
Click to collapse
Damn.. I have been messing with a lot of setting. I better watch out.. Hope u find a solution soon
garynsa said:
Damn.. I have been messing with a lot of setting. I better watch out.. Hope u find a solution soon
Click to expand...
Click to collapse
Yeah it sucks, back to my trusty gs3. Till I can figure how to convert a tot file for use in flashtool 2014, or send it off I assume.[emoji24]
joeyhdownsouth said:
Yeah it sucks, back to my trusty gs3. Till I can figure how to convert a tot file for use in flashtool 2014, or send it off I assume.[emoji24]
Click to expand...
Click to collapse
See if this guy can help
http://forum.xda-developers.com/showpost.php?p=54893808&postcount=74
also u can try this (PLEASE OD THESE AT OWN RISK AS I AM NOT A DEV AND NOT TRIED THIS BEFORE)
http://www.lg-phones.org/how-to-convert-lg-firmware-from-bin-tot-to-kdz.html
garynsa said:
See if this guy can help
http://forum.xda-developers.com/showpost.php?p=54893808&postcount=74
also u can try this (PLEASE OD THESE AT OWN RISK AS I AM NOT A DEV AND NOT TRIED THIS BEFORE)
http://www.lg-phones.org/how-to-convert-lg-firmware-from-bin-tot-to-kdz.html
Click to expand...
Click to collapse
thanks, haven't looked in other variant threads, just contacted him.
gonna see if my Flashtool is the most up to date version after work today. I would like to solve this issue, seems to be in almost every G3 forum. Haven't tried LG suite either.
I think I have the solution, gonna test it out after work today before I mark this thread solved. Will post solution also.
Great
---------- Post added at 10:00 PM ---------- Previous post was at 09:59 PM ----------
I can then try to play eith some settings
garynsa said:
Great
---------- Post added at 10:00 PM ---------- Previous post was at 09:59 PM ----------
I can then try to play eith some settings
Click to expand...
Click to collapse
I know what I did. forgot to set permissions. [emoji35] Guess I'm too used to Samsung.
Set permissions to what?
Yes I did. in LG Flash Tool use Board DL not the other. It worked perfect it boots into normal MiniOS and then you hold Power and push Normal Boot on the screen.
garynsa said:
Set permissions to what?
Click to expand...
Click to collapse
After I rooted I went and changed build prop line for all apps in multiwindow, didnt fix any permissions. When I rebooted phone, got the error. Just fixed it with flashtool finally.
blmvxer said:
Yes I did. in LG Flash Tool use Board DL not the other. It worked perfect it boots into normal MiniOS and then you hold Power and push Normal Boot on the screen.
Click to expand...
Click to collapse
The guide I was following said nothing about changing action to board dl. I wasted 6 hours last night thinking it was never gonna happen. I got it back up.
the resolution to flashtool hanging at 93%, then rebooting to same blue "factory reset status 2" screen is in the attached picture in the left bottom corner. Make sure you change action mode to board DL, this caused me alot of headaches last night. Thanks to user thinh182009 for pointing out this minor lil troublemaker and allowing me to use his image.
joeyhdownsouth said:
the resolution to flashtool hanging at 93%, then rebooting to same blue "factory reset status 2" screen is in the attached picture in the left bottom corner. Make sure you change action mode to board DL, this caused me alot of headaches last night. Thanks to user thinh182009 for pointing out this minor lil troublemaker and allowing me to use his image.
Click to expand...
Click to collapse
PLEASE HELP: i got the same problem and checking board dl didnt work for me im still stuck on 94% and on the red giant number 2
BeamBurrito said:
PLEASE HELP: i got the same problem and checking board dl didnt work for me im still stuck on 94% and on the red giant number 2
Click to expand...
Click to collapse
It took a few times of trying, before it actually worked. A few things to try, redownload .tot file, try different usb cables, or even a different computer. Where did you get .tot from?
Also read THIS guide, very well written.
sent from my LG G3
Don't know if this works for everyone but it worked for me. Ok well i kept getting the blue screen and it wouldnt let me enter recovery mode or do anything it seemed like my phone was over heated the whole time and wouldnt cool down so i stuck my lg g3 without the battery in the fridge for like 15 minutes took it out then put the battery in and it worked!! but it only works for a certain amount of time until it starts to heat back up but maybe that will give you enough time, like it did me, to download all your files onto an sd card or maybe just to your computer and factory reset it. Hope this helps! It worked for me
SOLVED
I had the blue blue screen problem two weeks after the replacement of my broken screen in a LG G3 D855.
It get hot and the battery went down very quick.
I saw this video
ube com/watch?v=6IVFA_224Aw&t=236s
and realiced that the motherboard didn't seat perfectly in its place, so the conectors could make a shor circuit.
putting plastic and paper over de connectors and PROBLEM SOLVED. No blue screen, battery and phone working perfectly.
Regards.
Related
oh sweet jesus i hope this wasn't due to me
i was installing busybox following this guide, ho hum, nothing special
http://www.youtube.com/watch?v=VtnYqAQa0ek
however, after installing it in clockwork recovery and rebooting, i'm met with THIS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
where the samsung animated boot logo should be!
if i turn the screen off then back on, it's just a blank screen!
holy crap! what did i do!?
also, i cannot boot into recovery mode! even with the power button and volume down held, the android logo(s) do not appear!
ohgodohgodohgod
ADB?
Sent from my HTC Flyer
Does your pc still recognize it?
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to Q&A
well, that's what i get for not reading youtube comments
turns out that video breaks EVERYONE's tablet, and they need to be flashed back to stock firmwar using ODIN in order to fix it
i'll see if that works
edit: never-friggin-mind, i cannot get back into recovery or download mode. period.
crap
---------- Post added at 12:29 PM ---------- Previous post was at 12:23 PM ----------
Flashmaniac said:
Does your pc still recognize it?
Click to expand...
Click to collapse
yes, and i can still put files on there
actually i'm pretty sure all my problems can be solved by having debug mode enabled, which would allow ODIN access to my machine as well as the possibility of ADB commands
problem is, usb debugging is NOT enabled and i have no idea to enable it with these damn scan lines happening
is there any way to "force" debugging on?
what the hell! it isn't even being recognized by adb!
->adb devices
returns no attached devices
and yet i have another window open with the tablet's internal memory visible
what gives?
Same exact thing happened to me from that video..I followed a video to unroot and factory reset and it cleared up...
divo3369 said:
Same exact thing happened to me from that video..I followed a video to unroot and factory reset and it cleared up...
Click to expand...
Click to collapse
wait, how did you manage to unroot it without access to download mode, adb, or settings of any kind?
I was able to get into DL mode. By holding down the power and volume key.
divo3369 said:
I was able to get into DL mode. By holding down the power and volume key.
Click to expand...
Click to collapse
well there you go
my problem is that i'm unable to access download mode, or recovery mode
Can you turn the tab off?
pkoper said:
Can you turn the tab off?
Click to expand...
Click to collapse
with some difficulty, yes
it's tough to time though, because i have no visual feedback on the rainbow screen, so oftentimes it goes into a reboot because i held the button too long
plugging it in to charge helps this somewhat, because i can tell it's off if the charging splash screen is visible and animating
i think the general term for what i have is a "soft brick", but without access to download or recovery mode i'm not sure where to go for a fix
divo3369 said:
Same exact thing happened to me from that video..I followed a video to unroot and factory reset and it cleared up...
Click to expand...
Click to collapse
After you did this and returned to stock, have you been able to download the OTA with touchwiz? I had this same corrupt display problem, followed the directions from zedomax to return to stock and unroot but when I try to download the latest updates and get touchwiz it says I'm up to date (after a small 11mb update which did NOT include touchwiz).
All I want now is to be back to stock with touchwiz like I was before. :/
SirKnightTG said:
After you did this and returned to stock, have you been able to download the OTA with touchwiz? I had this same corrupt display problem, followed the directions from zedomax to return to stock and unroot but when I try to download the latest updates and get touchwiz it says I'm up to date (after a small 11mb update which did NOT include touchwiz).
All I want now is to be back to stock with touchwiz like I was before. :/
Click to expand...
Click to collapse
Hrrm, you might need to do things unofficially, surely there's a rom out there like what you want? Starburst is pretty cool, like a faster version of touchwiz
Osbor said:
Hrrm, you might need to do things unofficially, surely there's a rom out there like what you want? Starburst is pretty cool, like a faster version of touchwiz
Click to expand...
Click to collapse
Yes I think you're right. I was wanting to try Starburst anyway which is based off the touchwiz rom. That would have what I want plus more (faster overall and over-clocking!).
What I'm not sure about is which one do I pick? From here: http://downloadandroidrom.com/file/GalaxyTab10.1/roms/StarBurstROM/
Or is there a newer one than those? I can't tell from the starburst thread if what's on there is newer than on that site or not...
The biggest thing I want, besides getting TW back, is adhoc mode so I can connect to my iPad 3G w/ MyWi (#1 reason for me to root anyway). I wish google would just allow adhoc stock. Apple does with iOS, I don't see why google can't.
same issue
I tried to get the overclocking installed and now I get the rainbow scanlines
I get the download option but I cannot put the hc-31 file onto my sdcard to start the unroot process.
Any help would be greatly appreciated.
Thanks,
Brian
NM fixed it. in order for it to read the folder I had to wait for the tab to shut itself off then turn it back on. Weird but its working
Im new to rooting and such, I was trying to gingerbread using odin and it said failed. The phone froze up and I had to pop the battery and now it is dead. is there a way to fix this and get the phone back on? will not go into recover or download modes.
thank you
bump for help thanks
oAnthonYo said:
bump for help thanks
Click to expand...
Click to collapse
Lol...don't expect to get an immediate response from someone. What you need to do is quite being lazy and do some quick research in the the Q & A section.
http://forum.xda-developers.com/showthread.php?t=849028
Now what exactly was it you were flashing? What GB rom did you flash? and was it a .tar file that you flashed along with the 512.pit file?
You should try removing your battery/simcard/sdcard and then try getting into download mode. Don't worry if the yellow android dude doesnt appear. As long as the screen shows some kind of error with a picture of a phone with an (!) mark well then you are good to go. Your PC should still be able to recognize your device. Try different USB ports. Just flash back to stock 2.1 using the guide above if you are able to get into download mode.
thank you, i did some reading and i think i need a jig to get back into dl mode. have tried a lot of different ways to get into dl mode before posting this. thanks for your advice. appreciated.
oAnthonYo said:
thank you, i did some reading and i think i need a jig to get back into dl mode. have tried a lot of different ways to get into dl mode before posting this. thanks for your advice. appreciated.
Click to expand...
Click to collapse
Here is the guide i meant to post. This guide will probably get your phone to boot.
http://forum.xda-developers.com/showthread.php?t=848737
Do you get any power at all? If so then that is a good sign.
Pull your battery and plug in your USB to your computer and open Odin. Do not have your phone attached to the USB yet. Now with Odin open and your battery pulled, (this part is tricky) Hold the Volume +/- and put your battery in and plug your phone in. You do not need to see the Android with the shovel to be in download mode. What you need to see is that yellow COM box in Odin. Once you see that then you are good to go.***See below
Few things:
It may take you a few tries to do this.
If you are not getting any power at all, you may have corrupted your bootloader when you prematurely stopped the install the first time. If this is the case, then sorry to say, but you are screwed and have hard bricked your phone.
Merio- Take it easy on the guy, he is in full blown panic mode and we have all been there. Remember when you got the Encryption Bug?
This is fromN00b_IN_N33D's MIUI guide but it'll serve our purposes here.
"SOFT" BRICKED WHILE USING ODIN?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are getting a "Phone.. ! ..Computer" image (seen above) when booting phone, yes, you are bricked but it is reversible! Just follow these steps...
Make sure you have ODIN OPEN with admin privileges!
1.) Take off your back cover, remove your sim & mirco sd card.
2.) Remove your battery.
Make sure you have the USB plugged into your PC but NOT your phone!
3.) Hold the volume buttons.
4.) Put the battery in.
5.) Put the USB in.
You don't necessarily need the download mode image to be present. As long as you are getting the COM ID to light up yellow in ODIN, just flash back to stock like normal.
Click to expand...
Click to collapse
Woodrube said:
Do you get any power at all? If so then that is a good sign.
Pull your battery and plug in your USB to your computer and open Odin. Do not have your phone attached to the USB yet. Now with Odin open and your battery pulled, (this part is tricky) Hold the Volume +/- and put your battery in and plug your phone in. You do not need to see the Android with the shovel to be in download mode. What you need to see is that yellow COM box in Odin. Once you see that then you are good to go.***See below
Few things:
It may take you a few tries to do this.
If you are not getting any power at all, you may have corrupted your bootloader when you prematurely stopped the install the first time. If this is the case, then sorry to say, but you are screwed and have hard bricked your phone.
Merio- Take it easy on the guy, he is in full blown panic mode and we have all been there. Remember when you got the Encryption Bug?
This is fromN00b_IN_N33D's MIUI guide but it'll serve our purposes here.
Click to expand...
Click to collapse
Lol, man have I seen that a few times as long aa you can sew something I've always been able to vet it back
Sent from my SGH-T959 using xda premium
I have not been able to get any power as of yet. Think it is hard bricked with what I have read. Thank you ,I will try these things when I get home from work today.
Tried this when I had gotten home and still nothing. It must be hard bricked, can it be fixed with a jig or something else or do I sell it on ebay and buy another one?
oAnthonYo said:
I have not been able to get any power as of yet. Think it is hard bricked with what I have read. Thank you ,I will try these things when I get home from work today.
Tried this when I had gotten home and still nothing. It must be hard bricked, can it be fixed with a jig or something else or do I sell it on ebay and buy another one?
Click to expand...
Click to collapse
Thanks for the help.
You could try to Jtag it (mobilcity something-use the search in Q&A or General and it shoudl pop up). Not sure about selling it on Ebay as you'll have to disclose it as bricked. Once you get a new one, come'on back and we'll take care of you.
Woodrube said:
You could try to Jtag it (mobilcity something-use the search in Q&A or General and it shoudl pop up). Not sure about selling it on Ebay as you'll have to disclose it as bricked. Once you get a new one, come'on back and we'll take care of you.
Click to expand...
Click to collapse
Thank you, I will be around on here. Not going anywhere. Appreciate the advice.
OP I was in your same boat last week. I sent mine to josh at mobile videos.com and for $80 has my phone working again and my custom ROM and kernel installed..I would definitely recommend this because it's a lot cheaper than buying another vibrant online and it takes a week
cpg1987 said:
OP I was in your same boat last week. I sent mine to josh at mobile videos.com and for $80 has my phone working again and my custom ROM and kernel installed..I would definitely recommend this because it's a lot cheaper than buying another vibrant online and it takes a week
Click to expand...
Click to collapse
Thanks Brother,
I was researching places last night and found this same site. I will be shipping it off this weekend to be jtaged. I am glad that they fixed yours.
I was also looking on ebay for galaxy s and sII. I found a listing that a guy had just posted for a sII. He wanted $280 for it which I thought was a steal, I went to take a shower and think about it and when I came back 10 minutes later it was sold. AI missed it.
One second my Galaxy S3 GT-I9300 was working perfectly fine, and about two minutes later I got it out of my pocket to check something and it was off. I thought it was the sleep of death issue so as usual I held the Power button expecting my phone to restart from the black "GT-I9300" screen. It didn't. I took out the battery and inserted it back in and tried again. Still it wouldn't turn on.
Starting to get worried I tried to boot up download mode and reboot mode. That didn't work either. Thinking the battery might have randomly become flat (even though I remember seeing 45% a few minutes ago) I put it on charge. The screen didn't turn on like it usually does when the S3 is put on charge :/
This sort of thing has never occurred to me before, either on the GT-I9000 or the GT-I9300.
After some research looks like my S3 is bricked for good except for maybe some hope (http://forum.xda-developers.com/showthread.php?t=1731255)? Is there anything else I can do? Sounds like this is the "Sudden Death" problem that was fixed recently, is there anyway at all I can take advantage of this fix?
Also, is there anyway at all I can backup my internal storage?! The last backup I took was about 2-3 months ago (yes..you can call me a fool, I know -_-) and there are lots of important texts, app data, backups and photos that I foolishly didn't backup or sync to the cloud :/
If any extra information is needed to "solve the case" please ask.
Thank you in advance.
Whoosh13 said:
One second my Galaxy S3 GT-I9300 was working perfectly fine, and about two minutes later I got it out of my pocket to check something and it was off. I thought it was the sleep of death issue so as usual I held the Power button expecting my phone to restart from the black "GT-I9300" screen. It didn't. I took out the battery and inserted it back in and tried again. Still it wouldn't turn on.
After some research looks like my S3 is bricked for good except for maybe some hope (http://forum.xda-developers.com/showthread.php?t=1731255)? Is there anything else I can do? Sounds like this is the "Sudden Death" problem that was fixed recently, is there anyway at all I can take advantage of this fix?
Click to expand...
Click to collapse
If you have access to Download mode flash this new bootloader immediatly via Odin PC in "PDA" :
Jtag as the device dont work on battery.
Perka said:
Jtag
Click to expand...
Click to collapse
How do Jtags work, where can I get one/make one?
nhariamine said:
If you have access to Download mode flash this new bootloader immediatly via Odin PC in "PDA" :
Click to expand...
Click to collapse
Nope, no access for download mode, any other options :/
nhariamine said:
If you have access to Download mode flash this new bootloader immediatly via Odin PC in "PDA" :
Click to expand...
Click to collapse
Really? How can he flash if he cant get in to dl mode?
---------- Post added at 09:35 PM ---------- Previous post was at 09:34 PM ----------
Whoosh13 said:
How do Jtags work, where can I get one/make one?
Nope, no access for download mode, any other options :/
Click to expand...
Click to collapse
Well get one from samsung
EDIT: I dont know how Jtag works, but they work, well if hw is not bad
Perka said:
Really? How can he flash if he cant get in to dl mode?
---------- Post added at 09:35 PM ---------- Previous post was at 09:34 PM ----------
Well get one from samsung
Click to expand...
Click to collapse
any links for UK, ill search in the meantime. I watched a video btw to see how one works, so that part is sorted...
Whoosh13 said:
Nope, no access for download mode, any other options :/
Click to expand...
Click to collapse
Try removing battery for an hour or more then try download mode.
nhariamine said:
Try removing battery for an hour or more then try download mode.
Click to expand...
Click to collapse
Okay, i'll remove it now. How high are the chances of this working, what will it do that will make it work?
Whoosh13 said:
Okay, i'll remove it now. How high are the chances of this working, what will it do that will make it work?
Click to expand...
Click to collapse
i don't know mate, but if ur eMMc chip is damaged ,u should return the phone to Samsung repair service to change the entire motherboard of ur s3 and replacing it with another one with brand new Rev date. just pray:angel:
nhariamine said:
If you have access to Download mode flash this new bootloader immediatly via Odin PC in "PDA" :
Click to expand...
Click to collapse
Yea if you read his phone is dead.
JTag can help
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
nhariamine said:
i don't know mate, but if ur eMMc chip is damaged ,u should return the phone to Samsung repair service to change the entire motherboard of ur s3 and replacing it with another one with brand new Rev date. just pray:angel:
Click to expand...
Click to collapse
Okay and is there any chance to save my files on my internal storage?
EDIT: I'm guessing when they replace the motherboard the stuff on my internal storage will go! :/
Whoosh13 said:
Okay and is there any chance to save my files on my internal storage?
EDIT: I'm guessing when they replace the motherboard the stuff on my internal storage will go! :/
Click to expand...
Click to collapse
you can try this, not much hope, but sometimes work:
take out the battery
let it be for a minute or so
push the three button combo for dl mode, and keep it while placing the battery in.
maybe you'll need an extra hand for this
Sent from SGS III GT-I9300 ??????
marcedli said:
you can try this, not much hope, but sometimes work:
take out the battery
let it be for a minute or so
push the three button combo for dl mode, and keep it while placing the battery in.
maybe you'll need an extra hand for this
Sent from SGS III GT-I9300 ??????
Click to expand...
Click to collapse
thanks, i'll try it in and tell you guys how it goes!
UPDATE: nope, didn't work :/
Try to plug in the charger without inserted battery and then try to turn on the phone.
Mikulec said:
Try to plug in the charger without inserted battery and then try to turn on the phone.
Click to expand...
Click to collapse
Tried that too, didn't work, looks like I'll need to try some jtag process :/ im just hoping I can get my internal sd contents somehow. My friend told me its just an overclocked sd card..is this true?
Hey guys,
i think i bricked my phone.
i must admit it may be my own fault as i didnt really know what i was doing anyways ill talk you through what happened....
i was trying to get cwn recovery onto my phone and as said i was unsure of what i was doing (i know im Stupid) i had already sucessfully rooted the phone and i opened mtkdroid tools and clicked backup and recovery the box on the right started to spit out text as my phone became detached from the data cable.
Now when i try to power up the phone the backlight lights up for 3-4 seconds then nothing if i hold
volume + and power with no data cable i get the same backlight for 3-4 seconds
volume + and power with data cable i get a dead droid with a red ! in a triangle in its belly ?
the phone displays a battry bar in blue if i do nothing
the pc seems to recognise phone as universal serial bus
mtkdroidtools does not regognise the phone at all
the phone did say android preloader driver not found but ive installed this and this has now disapeared?
anyone help even if its just to tell me to give up (hopefully not ive had the phone about 2 hours EPIC FAIL)
bump
Over 90 views and no-one even attempted to help...
Short and sweet , hopefully this will get you up and running again.
Download these 2 files
http://pan.baidu.com/share/link?uk=3055194073&shareid=4221153774[/URL
[URL="http://d-h.st/KyK"]http://d-h.st/KyK
Basically this is the default rom, along with spflashtools.
Unzip both to your harddrive somewhere.
Open the location you have extracted spflashtools and click on Flash_tool.exe , then, click scatter-loading on the right hand side, and point it to where you have extracted the rom.
Now, with your phone unplugged from PC/Laptop click the Download button in SPFlashtool. Click ok to anything that pops up.
Now, take the battery out of your phone, and insert the usb cable into the laptop, WITH BATTERY UNPLUGGED . Keep the battery unplugged untill the flash is complete, a little box with a circle saying OK will show after few minutes.
Try this, hopefully this will put you back to stock and you can try again
Cheers pal ill give this a try tomorrow. You're a legend!
And to the 90 views I don't mind as said its my own fault and can't blame the people who had ideas bet they get this all the time usually from noobs who require babysitting through the process ...
Anyways fingers crossed
Ok so its not working im getting the error in the following picture if anyone can help......
firstly sp flash tools just searches for the com port / usb when the battery is not installed ive tried various build of sp flash with the same results.
when i insert the battery it finds com 5 or 6 and goes to 100% of the red progress bar then i recieve the following error
heres a screenshot (icant post links yet)
imageshack.us/photo/my-images/268/lrid.jpg/
many thanks
Garry
BIGG1985 said:
imageshack.us/photo/my-images/268/lrid.jpg/
Click to expand...
Click to collapse
Have you a link to where you bought your phone ?
Looks like a dual core version ?
If you can point me to where you purchased your model i should be able to get you the correct ROM to load
unfortunatly the phone was bought from a guy in england looks like he ripped me off.... it appears to be the same phone as
dhgate.com/product/air-gesture-real-5-0-inch-s4-1-1-i9500-7/139991313.html#s1-2-1|3289411982
what about it only working with the battery in too is this a big problem i make sure the phone is still not powered on but it just wont download with the battery out....
many thanks
Garry
soft brick
BIGG1985 said:
Hey guys,
i think i bricked my phone.
i must admit it may be my own fault as i didnt really know what i was doing anyways ill talk you through what happened....
i was trying to get cwn recovery onto my phone and as said i was unsure of what i was doing (i know im Stupid) i had already sucessfully rooted the phone and i opened mtkdroid tools and clicked backup and recovery the box on the right started to spit out text as my phone became detached from the data cable.
Now when i try to power up the phone the backlight lights up for 3-4 seconds then nothing if i hold
volume + and power with no data cable i get the same backlight for 3-4 seconds
volume + and power with data cable i get a dead droid with a red ! in a triangle in its belly ?
the phone displays a battry bar in blue if i do nothing
the pc seems to recognise phone as universal serial bus
mtkdroidtools does not regognise the phone at all
the phone did say android preloader driver not found but ive installed this and this has now disapeared?
anyone help even if its just to tell me to give up (hopefully not ive had the phone about 2 hours EPIC FAIL)
Click to expand...
Click to collapse
it is soft brick you should flash with boot image!!
BIGG1985 said:
unfortunatly the phone was bought from a guy in england looks like he ripped me off.... it appears to be the same phone as
dhgate.com/product/air-gesture-real-5-0-inch-s4-1-1-i9500-7/139991313.html#s1-2-1|3289411982
what about it only working with the battery in too is this a big problem i make sure the phone is still not powered on but it just wont download with the battery out....
many thanks
Garry
Click to expand...
Click to collapse
ok
Try downloading this rom
http://www.needrom.com/wp-content/uploads/2013/08/S4-6577_AIRGESTURE_I950X_V101En20130627.rar
You may to need to register with needrom
That ROM is the default MTK6577 Rom with air gestures
Do as i instructed earlier, extract the rom from zip, this time rename the folder as it contains special characters which may throw of SP Tools
i.e rename folder S4จาง6577_AIRGESTURE_I950X_V101En20130627 to mtk6577 or something.
Then load the scatter file, hit download and insert cable again with no battery , see if that runs now
also , here are the MTK6577 drivers if required
http://androidurdu.com/download/MT6577%20USB%20VCOM%20drivers.rar
Ok so.......
again nothing without the battery installed just keeps searching and nothing.
witht the battery in it flashed got the green circle and everything.
but when i power up the phone i get a white display with black lines down centre.... occasional color bit
same screen when i try to enter recovery
meh not got my hopes up aswell
thnaks for the help guys really appreciate
is it worth trying to flash anything else or should i give up.....
OK don't panic.
First you should know there's plenty of S4 clones out there (HDC Galaxy S4, HDC Spark, Meso S4, unidentified Dual SIM S4 clone, etc., etc.).
Second you have to be 100% sure your system is properly set up.
If you or a friend of you has another MTK (better if MTK6589) smartphone check if everything works properly (drivers, flashing, etc.).
If not install everything properly and in a clean Windows partition without 300 USB drivers and devices.
Once you are done with what written above come back and we will see.
In the meantime upload a pic of the backside without cover and battery, but please be sure to hide the printed IMEI number.
Sent from my Samsung Galaxy Note with Tapatalk 2
Thanks i will have to look into creating a windows partition not something i have ever done.. i will also get a picture of the phone uploaded asap thanks for your help.i dont have a friend with a similar phone but i do have an mtk6589 s4 coming from china (dhgate) its a replacement for one that was broke on arrival just takes forever i bought this to put me on..
Hey guys here are the pictures on the phone
imageshack.us/a/img20/8845/kss4.jpg
imageshack.us/a/img829/25/yskl.jpg
imageshack.us/a/img12/5650/jgij.jpg
imageshack.us/a/img823/1478/7b2o.jpg
i also took a screen shot from USB Deview to show what drivers are being used during a flash not sure if its useful or not tho.
thanks again
Garry
So youvr bought a take s4 and fvcked it... good one you n0000b
Sent from my GT-I9300 using xda premium
cheadabudas - yes i maybe a n00b but at least im not someone who has nothing better to do than troll through xda commenting on posts with no relevance L0S3R :laugh:
After speaking to the original owner i believe this is the phone.....
dhgate.com/product/new-arrive-1-1-gt-i9500-i9500-feiteng-h9500/164699915.html#s1-2-1|2177543576
it also has the same black block near the speaker jack which i havent noticed on any other model
anyone have a rom ?
Bump
ok so finally found the required rom for anyone else having the same problem
http://www.filedropper.com/1to1s4softwareandtool
broken link
BIGG1985 said:
ok so finally found the required rom for anyone else having the same problem
your link does not work anymore can you send a working link, thanks.
Click to expand...
Click to collapse
Trojan found in USB driver from package in the androidurdu.net
wilsey said:
ok
Try downloading this rom
needrom.com/wp-content/uploads/2013/08/S4-6577_AIRGESTURE_I950X_V101En20130627.rar
You may to need to register with needrom
That ROM is the default MTK6577 Rom with air gestures
Do as i instructed earlier, extract the rom from zip, this time rename the folder as it contains special characters which may throw of SP Tools
i.e rename folder S4จาง6577_AIRGESTURE_I950X_V101En20130627 to mtk6577 or something.
Then load the scatter file, hit download and insert cable again with no battery , see if that runs now
also , here are the MTK6577 drivers if required
androidurdu.com/download/MT6577%20USB%20VCOM%20drivers.rar
Click to expand...
Click to collapse
Beware of Win.Trojan.Slugin-283
was deteced by antivirus from this site.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi All,
Ok my other half had a GS2 which I dont think is bricked I can switch it on
o2 Splash screen comes on
Have to put the pin in to get access to the phone
Then Iam met with
Sorry!
The application IM has stopped working unexpectedly. Please try again later
Force Close
The last bit just keeps looping and I cant go any further. I can see the home screen but I cant get to it.
More anoying I cant put the phone into recovery or download mode.
I dont care about the phone but I need to get the pictures and videos off any ideas?
Thanks
MathewRB said:
Hi All,
Ok my other half had a GS2 which I dont think is bricked I can switch it on
o2 Splash screen comes on
Have to put the pin in to get access to the phone
Then Iam met with
Sorry!
The application IM has stopped working unexpectedly. Please try again later
Force Close
The last bit just keeps looping and I cant go any further. I can see the home screen but I cant get to it.
More anoying I cant put the phone into recovery or download mode.
I dont care about the phone but I need to get the pictures and videos off any ideas?
Thanks
Click to expand...
Click to collapse
ROM? Kernel? Have you tried factory reset? It will not wipe photos.
GamingDj said:
ROM? Kernel? Have you tried factory reset? It will not wipe photos.
Click to expand...
Click to collapse
Yes I could flash to a stock ROM and see what happens but are we sure that will not remove the pictures and videos?
OK I dont think that is going to be an option as my pc does not see the device attached via USB.
And when I have Odin running it cant see the device
Sudgestions?
1.It will surely not wipe photos,because you don't format the internal SD.It just removes apps,contacts...
2.look at my signature and follow my guide.If your PC can't see phone,then look for Hopper8's thread(link in guide or search on XDA)
Do you want your phone fixed or not ? I remember you from a couple of months back with that app that you refused to accept would only run on unrooted stock. And here we are fast forwarded a couple of months & again you're refusing to accept the advice/method to fix you've been given (which works & takes all of a couple of minutes; and if it doesn't work first go you look for Hopper8's 'Odin won't flash' thread).
You can either fix the phone or not. No skin off our noses either way *shrugs*
MistahBungle said:
Do you want your phone fixed or not ? I remember you from a couple of months back with that app that you refused to accept would only run on unrooted stock. And here we are fast forwarded a couple of months & again you're refusing to accept the advice/method to fix you've been given (which works & takes all of a couple of minutes; and if it doesn't work first go you look for Hopper8's 'Odin won't flash' thread).
You can either fix the phone or not. No skin off our noses either way *shrugs*
Click to expand...
Click to collapse
LOL Someone has been busted here^^
MistahBungle said:
Do you want your phone fixed or not ? I remember you from a couple of months back with that app that you refused to accept would only run on unrooted stock. And here we are fast forwarded a couple of months & again you're refusing to accept the advice/method to fix you've been given (which works & takes all of a couple of minutes; and if it doesn't work first go you look for Hopper8's 'Odin won't flash' thread).
You can either fix the phone or not. No skin off our noses either way *shrugs*
Click to expand...
Click to collapse
Funny correct person diffrent phone
MathewRB said:
Funny correct person diffrent phone
Click to expand...
Click to collapse
Now we're talking. Let's start round 2!
OK I can get the phone into download mode but not the second screen. When I need to press Volume up it will not go however volume down does restart the phone. Yes the volume up button does work.
MathewRB said:
OK I can get the phone into download mode but not the second screen. When I need to press Volume up it will not go however volume down does restart the phone. Yes the volume up button does work.
Click to expand...
Click to collapse
Am confused now.. Can you enter Download mode or not?
No I cant
MathewRB said:
No I cant
Click to expand...
Click to collapse
What happens when you press and hold Volume Down + Power + Home?
Which of the below attached screenshots do you get (left or right)?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Left only I cant progress to the next screen
That's strange!! Hmm.. get or make a USB jig and use it to enter Download mode.
Yep we are on the same wave lenght! I have ordered a Jig this morning. I will report back and let you know what happens.
Ok I have the USB jig and this has forced the phone into downlaod mode. I had to remove the battery plug the jig in and then put the battery in this then took me into download mode.
However Odin still cant see the device.
I have confimred the Odin does work as I have a secon GS2 that I have tested with and theres no problem.
Whats next?
Any advice?
MathewRB said:
Any advice?
Click to expand...
Click to collapse
Check out the Odin troubleshooting guide by @Hopper8..
"To err is human, to forgive is divine."
Sent from my SGS II
It would apear that the volume button is not working which means I cant press up to enter Download mode. Is there a way to bypass the volume switch?