Related
I wanted to know if there is a screen protector preinstalled by Sony on the sola.. Because my screen is slightly scratched and I remember the sola having a scratchproof glass
Sent from my MT27i using xda app-developers app
There's a shatterproof sheet pre installed in sola and u can see it if u take a closer look around the earpiece or the screen edges. It's the sheet that scratches not the screen. You can apply a screen protector on top of it but in your case it's already scratched so I advise u to keep it as is and get the maximum use of the sheet and then peel of off and apply a good aftermarket seen protector
Sent from my MT27i using xda premium
My pre-installed screen protector was scratched, too. I peeled it off, after that I continued using it without applying a new one and my screen's now still ok. I think Sola's screen doesn't need a protector.
@OP-You should have posted it in
Xperia S, P, U, Sola, Acro S Accessories
It's the same for all xperia devices I think, my old x10 had it. I don't advise going without a screen protector, some supposedly scratch proof glasses have gotten scratched i.e. The galaxy note
Sent from my MT27i using xda app-developers app
neectron said:
@OP-You should have posted it in
Xperia S, P, U, Sola, Acro S Accessories
Click to expand...
Click to collapse
This.
Thread moved, post in the relevant section next time, you've been warned.
Hey everyone, there is an on-going deal in my country to get Z Ultra for couple days more at the price of 400 euro. The design and the hardware of the phone looks amazing literally drooling. But im concerned about the touch screen issues i read here, i currently own a Zopo C2 chinese brand and gives me headaches everytime im about to use just because the touch scr een is awful has phantom touches and shaking issue when you press-and-hold, it even goes crazy when you scroll up and down it scrolls very fast to the top or bottom of the page.
So i read there was few ROM updates about the touchscreen the last couple months and now a new KitKat update is on the way.
1) Does touch screen problems affect every single device( factory fault) or just few?
2) From your experience after those updates is the touchscreen completely fixed?
3) Does the screen break easily since its so big or is as tough as having a 5inch with gorilla glass?
4) I kinda hate the look of Xperia ROMs , it is possible to unlock bootloader/root and install custom recovery/custom ROMs atm? Or is it at least expected to get some ROM developing in the future?
Thanks, i kinda need some answers soon since the deal will go off in 1-2 days and the device originally costs 500-550 euros.
Hi!
1) I had phantom touches on an earlier firmware, but Sony fixed it in a later firmware. I've seen one or two guys here that still has phantom touches though, so i would say that it's pretty much fixed.
2) Yes.
3) I haven't read about anyone that has broken their screens, but it's a 6.4" screen after all, so it might break if it hits the ground.
4) Yes, you can unlock the bootloader, install Recovery and flash custom ROMs. As you might have picked up yesterday, Sony released the Z Ultra Google Play Edition. This will allow us to use the stock Kit Kat build from that one and "convert" our Ultras to Google Play Edition devices
I dropped mine on to concrete without any protection more then screen protector front and back. It landed on a corner and peeled off the silver but not a single scratch or crack on both sides.
It's built to make it I believe...
Sent from my Xperia Z Ultra using Tapatalk 4
Reb0rn said:
I dropped mine on to concrete without any protection more then screen protector front and back. It landed on a corner and peeled off the silver but not a single scratch or crack on both sides.
It's built to make it I believe...
Sent from my Xperia Z Ultra using Tapatalk 4
Click to expand...
Click to collapse
If you root you can reduce the screen sensitivity to get rid of phantom clicks.
Sent from my C6833 using XDA Premium 4 mobile app
SpyderTracks said:
If you root you can reduce the screen sensitivity to get rid of phantom clicks.
Sent from my C6833 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
And you quoted me because... ?
Sent from my Xperia Z Ultra using Tapatalk 4
Reb0rn said:
And you quoted me because... ?
Sent from my Xperia Z Ultra using Tapatalk 4
Click to expand...
Click to collapse
Lol, phantom click... Honest! Didn't mean to quote anyone
Sent from my C6833 using XDA Premium 4 mobile app
SpyderTracks said:
Lol, phantom click... Honest! Didn't mean to quote anyone
Sent from my C6833 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Oh, the irony
Sent from my C6833 using Tapatalk
Hi,
I am from India, using an Z Ultra. I was looking for a bumper case for it and stumbled upon a cool one in eBay:
http://www.ebay.in/itm/Ultra-Thin-A...-Case-Sony-Xperia-Z-Ultra-Black-/281162345171
But it is so expensive. Rs 2636.
If anyone have stumbled upon a cool bumper for the Z Ultra, which is a bit cheap, please post:angel:
Does the silence mean that nobody knows about a cheaper option in India?
Sent from my C6802 using XDA Premium 4 mobile app
vinurohitraj said:
Does the silence mean that nobody knows about a cheaper option in India?
Sent from my C6802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I've been searching for a long time.... Other than the one which you posted and another (nearly same price), I haven't found any bumpers. Aluminum ones, that is.
Sent from my Xperia Z Ultra using Tapatalk
warfareonly said:
I've been searching for a long time.... Other than the one which you posted and another (nearly same price), I haven't found any bumpers. Aluminum ones, that is.
Sent from my Xperia Z Ultra using Tapatalk
Click to expand...
Click to collapse
eBay Global Easy Buy
I picked up a black aluminium one of ebay GEB. Turned out slightly cheap. And the phone looks amazing with it. http://geb.ebay.in/g/ImportHubSearc...tra&catId=&qbtn=Search&_trksid=p2052119.l1440
Most of cheap aluminum bumper cases are un-reliable due to no protection in between the case and the phone. It gives u more scratch to the phone if the bumper is not tight enough. Plz ask seller about it.
Sent from my Galaxy Nexus using xda app-developers app
people, i have ordered the Black one in India, for my Black Xperia Z Ultra
http://www.lovemeicase.com/pro.asp?id=27
keeping my fingers crossed
I would like something like that since I want to go with glass screen protector but I keep reading about degraded connection signal so I am not so sure :/
Mine will arrive today
Will let u know my reviews
vinurohitraj said:
Mine will arrive today
Will let u know my reviews
Click to expand...
Click to collapse
Did it arrive already? Some pictures and words from your side will be appreciated!
Sent from my C6802 using xda app-developers app
Agree!
Ok I am sorry for the delay
Attaching pics
Sent from my C6802 using XDA Premium 4 mobile app
Rear View
Sent from my C6802 using XDA Premium 4 mobile app
vinurohitraj said:
Rear View
Sent from my C6802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Realize this is an older post, but was wondering if the bumper degraded your cell or gps signals? I have been thinking of getting one but read where some people have issues with them.
thanks
Not in use anymore
Ducter said:
Realize this is an older post, but was wondering if the bumper degraded your cell or gps signals? I have been thinking of getting one but read where some people have issues with them.
thanks
Click to expand...
Click to collapse
Hey, sorry for the delay in replying. Even though the bumper looks very cool, I have realized (the hard way, though) that you will not be seen using it all the time. First of all, the added bulk, even though very little, does not justify the usage
Secondly, the bumper may not be so comfortable to hold, may be cos of the edges
Thirdly, it does not play well with the Xperia Z Ultra design language. This is not as beautiful as a Nexus 4 bumper, i would say
I AM NOT USING THE BUMPER CASE anymore :cyclops:
vinurohitraj said:
Hey, sorry for the delay in replying. Even though the bumper looks very cool, I have realized (the hard way, though) that you will not be seen using it all the time. First of all, the added bulk, even though very little, does not justify the usage
Secondly, the bumper may not be so comfortable to hold, may be cos of the edges
Thirdly, it does not play well with the Xperia Z Ultra design language. This is not as beautiful as a Nexus 4 bumper, i would say
I AM NOT USING THE BUMPER CASE anymore :cyclops:
Click to expand...
Click to collapse
Thanks for getting back to me on such an old thread. Did the bumper degrade your signal strength any when you were using it? What are you using now?
Thanks again
Ducter said:
Thanks for getting back to me on such an old thread. Did the bumper degrade your signal strength any when you were using it? What are you using now?
Thanks again
Click to expand...
Click to collapse
Not sure about Signal Strength, as i didnt use it much.
I am using a transparent case now, so that my Xperia Z Ultra design shines through
vinurohitraj said:
Not sure about Signal Strength, as i didnt use it much.
I am using a transparent case now, so that my Xperia Z Ultra design shines through
Click to expand...
Click to collapse
It sounds like we all want the same thing... To keep the beautiful design visible and be minimalistic. Can you post where you got the clear case you ended up using and your thoughts on it? I would really be appreciative.
Munk0 said:
It sounds like we all want the same thing... To keep the beautiful design visible and be minimalistic. Can you post where you got the clear case you ended up using and your thoughts on it? I would really be appreciative.
Click to expand...
Click to collapse
It was a hard glass case. IMAK Case. It scratched my device on the sides. I took it and threw it. Now no case
Silicon cases might be the best option
oh man I'm sorry to hear that. That's kind of a nightmare and it sounds like we need to keep away from bumper cases and this all glass case.
Is it possible to switch out the camera from an xperia z1 and put it in the z ultra? I've read that the software has been ported over, but I'm curious whether it would be possible to change out the 8mp camera for a 20.7 one? I've not seen the internals of either phone but my assumption would be the connector would be the same or at the very least similar...
i.e. rip out the stock camera and replace it with this:
eBay itm/Main-Camera-Sony-Xperia-Z1-C6902-C6903-C6906-C6916-C6943-L39h-20Mpx-New-ORIGINAL-/181249041255?pt=UK_Replacement_Parts_Tools&hash=item2a3348e367
not allowed to post links but just add the missing bits to the above if you are so inclined.
Any ideas?
Cheers
ZeroXXoreZ said:
Is it possible to switch out the camera from an xperia z1 and put it in the z ultra? I've read that the software has been ported over, but I'm curious whether it would be possible to change out the 8mp camera for a 20.7 one? I've not seen the internals of either phone but my assumption would be the connector would be the same or at the very least similar...
Any ideas?
Cheers
Click to expand...
Click to collapse
Straight answer: no
Why:
The Z1 is 8.5mm thick
The ZU is 6.5mm thick
It wont fit.
Internally the Z1 and ZU are the same. Some module differences, and the camera obviously but a Z1 sensor would fit, its just the lens combination that is too thick to fit. And without that lens combination you wouldn't have the 20mp camera.
hamdogg said:
Straight answer: no
Why:
The Z1 is 8.5mm thick
The ZU is 6.5mm thick
It wont fit.
Internally the Z1 and ZU are the same. Some module differences, and the camera obviously but a Z1 sensor would fit, its just the lens combination that is too thick to fit. And without that lens combination you wouldn't have the 20mp camera.
Click to expand...
Click to collapse
So how bout others.....any previous xperia model...can it be done...?
Sent from my C6833 using XDA Premium 4 mobile app
martin132014 said:
So how bout others.....any previous xperia model...can it be done...?
Sent from my C6833 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I don't think you will find a fitting one. And I think the zu is glued so disassembling and reassembling will be very very tough
Sent from my C6833 using Tapatalk
martin132014 said:
So how bout others.....any previous xperia model...can it be done...?
Sent from my C6833 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I've pulled apiary mine, and it is difficult.. But possible. There is a rubber seal around the whole unit and a little glue to.
Seeing as the ultra is the thinnest yet, I don't think you'll get any other sensor in there. That's why it's as bad as it is I guess
hamdogg said:
I've pulled apiary mine, and it is difficult.. But possible. There is a rubber seal around the whole unit and a little glue to.
Seeing as the ultra is the thinnest yet, I don't think you'll get any other sensor in there. That's why it's as bad as it is I guess
Click to expand...
Click to collapse
So they sacrifice camera for thinnest..... Is it worth it.....for me, maybe, a little...
Sent from my C6833 using Tapatalk 4
The only module that i can think of to be put here is the one from Xperia 2011 devices.. But then, even if you managed to change it, you need to resolve the software for it too, which gets quite messy really fast..
Thanks for the replies
I still wonder if a case modification would allow for the camera...
Something to ponder and perhaps trial when the phone becomes obsolete
ZeroXXoreZ said:
Thanks for the replies
I still wonder if a case modification would allow for the camera...
Something to ponder and perhaps trial when the phone becomes obsolete
Click to expand...
Click to collapse
you would still need to build a kernel and rom just for this one off project
Can xperia z2 use liquipel ？
Ummm, why it needs liquipel anyway ?
ar216893 said:
Ummm, why it needs liquipel anyway ?
Click to expand...
Click to collapse
When the waterproof drop,it can protect the phone.
I want to bump this thread too. I just wonder if Z2 can have liquipel. Yes i know Z2 is waterproof but what if you didn't close flap properly or flaps are loose because of frequent use. Removable back covers like Xperia ZR would also take benefit for this. It would be nice to see this on future Xperia flagships as an addition or maybe an option that you can have.
Sent from my D5503 using XDA Free mobile app
infinitylook said:
I want to bump this thread too. I just wonder if Z2 can have liquipel. Yes i know Z2 is waterproof but what if you didn't close flap properly or flaps are loose because of frequent use. Removable back covers like Xperia ZR would also take benefit for this. It would be nice to see this on future Xperia flagships as an addition or maybe an option that you can have.
Sent from my D5503 using XDA Free mobile app
Click to expand...
Click to collapse
I think Liquipel guys cover only the outer shell, not flaps and such.
KyleSforza said:
I think Liquipel guys cover only the outer shell, not flaps and such.
Click to expand...
Click to collapse
I think liquipel can be applied to interior. Look at the iphone and moto g. Water gets inside. Liquipel puts your phone into a special vacuum where the applicant is turned to gas and forced inside the phone
Sent from my D5503 using XDA Free mobile app