Hi all, does anyone know if you can get these cases in the US? or if there is company ships to the US? Haven't been able to find much at all.
Clicky
Thanks in advance.
roninr1c said:
Hi all, does anyone know if you can get these cases in the US? or if there is company ships to the US? Haven't been able to find much at all.
Clicky
Thanks in advance.
Click to expand...
Click to collapse
+1
roninr1c said:
Hi all, does anyone know if you can get these cases in the US? or if there is company ships to the US? Haven't been able to find much at all.
Clicky
Thanks in advance.
Click to expand...
Click to collapse
I Think that is just for Docomo line. The volume button is different from our model.
Hey all I actually emailed them about 2 days ago asking about shipping to Australia, they are fine with international shipping. From what they sent all they require is a name, what you want and pay via PayPal. I'll be making my order soon, cost of shipping is $12USD to aus, if that sheds some light on shipping expense, by way of EMS.
Also I believe there is no difference with model apart from badging, a fellow who has it in the other thread has a international z2 and is located in Taiwan.
Wow those are gorgeous cases, indeed .
wow,.... that's a really nice case,.... i don't know about paying 72 bucks and plus the $12 for shipping,...
cHoLoCoY said:
wow,.... that's a really nice case,.... i don't know about paying 72 bucks and plus the $12 for shipping,...
Click to expand...
Click to collapse
I completely agree with you ☺. But regardless, that is one beautiful case. I am looking for a bumper for this phone but I can't afford to pay Thai much for a case. Lol.
I really wish someone would make these aluminum bumpers in carbon fibre or something other than signal blocking metal. I have a couple for my ultra z and notice I lose about 1-1.5 bars of signal which means I have no signal many places. Also seems like I get about an hour less battery (probably because of the signal issue. They look really nice though!
Alright, so I need to share my experience regarding this bumper.
It initially came to my attention when searching for bumpers/cases etc, but at first I figured it was beyond what I was willing to pay for it. I did not want a full case or TPU skin etc, as I wanted as much of my phone 'naked' as possible, while getting some minor protection from everyday bumps, dragging across tables and various Jeep related bounces. A bumper was what I wanted.
I tried a cheap one from ebay. It came within 2-3 weeks, and was what you expected. Cheap, and I felt almost decorative. A drop would knock it off, as it uses a clasp s screws. It was also very thin, so it flexed while on the phone around the port openings. I couldn't complain, as I got what I paid for.
That brings me back to this bumper. I had already decided on the Amber Orange one long ago when I dreamt of it, so I simply sent out a semi-serious email via their site with some basic inquiries to pricing, shipping, stock, etc.
-AUG 30 - Initial contact via site form, I got a response within hours via email.
-AUG 31 - I was sold, and had them invoice me, and paid it shortly after receiving it via PayPal.
-SEP 1 - I received an email stating it was shipped, provided the tracking number, and they included photos of the package, the item, the shipping label, and the invoice.
-SEP 2 - I see it has left Japan and was enroute to Canada.
-SEP 3 - Just after midnight, it clears customs, goes through Toronto, Mississauga, then heads to my town which is about an hour/hour and a half away. I missed delivery today at 11am, as I was at work...
It was packaged in an airmail envelope, which contained a brown cardboard box, which contained a store quality box container, which contained a small material bag, which contained my unit.
I was amazed how fast this whole communication to unit in hand took. Each step of the way, communication was fast and efficient, and more than adequate.
The unit itself went on like a glove. There are no gaps, no flex, and no misalignment. Even the port cutouts have a bit of fingernail space to leverage into. It looks good, feels good, sturdy, and provides a bit of a lip for me to hold late at night while tired and wandering aimlessly. No noticeable signal loss, however I am in a great area to begin with, so this has never been an issue for me.
I am extremely pleased with this purchase and product.
Cheers all.
Pics???????
Don't leave us hanging
-LP
hexwulf said:
Alright, so I need to share my experience regarding this bumper.
It initially came to my attention when searching for bumpers/cases etc, but at first I figured it was beyond what I was willing to pay for it. I did not want a full case or TPU skin etc, as I wanted as much of my phone 'naked' as possible, while getting some minor protection from everyday bumps, dragging across tables and various Jeep related bounces. A bumper was what I wanted.
I tried a cheap one from ebay. It came within 2-3 weeks, and was what you expected. Cheap, and I felt almost decorative. A drop would knock it off, as it uses a clasp s screws. It was also very thin, so it flexed while on the phone around the port openings. I couldn't complain, as I got what I paid for.
That brings me back to this bumper. I had already decided on the Amber Orange one long ago when I dreamt of it, so I simply sent out a semi-serious email via their site with some basic inquiries to pricing, shipping, stock, etc.
-AUG 30 - Initial contact via site form, I got a response within hours via email.
-AUG 31 - I was sold, and had them invoice me, and paid it shortly after receiving it via PayPal.
-SEP 1 - I received an email stating it was shipped, provided the tracking number, and they included photos of the package, the item, the shipping label, and the invoice.
-SEP 2 - I see it has left Japan and was enroute to Canada.
-SEP 3 - Just after midnight, it clears customs, goes through Toronto, Mississauga, then heads to my town which is about an hour/hour and a half away. I missed delivery today at 11am, as I was at work...
It was packaged in an airmail envelope, which contained a brown cardboard box, which contained a store quality box container, which contained a small material bag, which contained my unit.
I was amazed how fast this whole communication to unit in hand took. Each step of the way, communication was fast and efficient, and more than adequate.
The unit itself went on like a glove. There are no gaps, no flex, and no misalignment. Even the port cutouts have a bit of fingernail space to leverage into. It looks good, feels good, sturdy, and provides a bit of a lip for me to hold late at night while tired and wandering aimlessly. No noticeable signal loss, however I am in a great area to begin with, so this has never been an issue for me.
I am extremely pleased with this purchase and product.
Cheers all.
Click to expand...
Click to collapse
LucKyPunk said:
Pics???????
Don't leave us hanging
-LP
Click to expand...
Click to collapse
Check out Devilcase USA. They have a case for the Z2. Looks like Amazon is the only retailer right now.
http://www.amazon.com/DevilCase-Z2-...8&qid=1409809475&sr=8-1&keywords=devilcase+z2
hexwulf said:
Alright, so I need to share my experience regarding this bumper.
It initially came to my attention when searching for bumpers/cases etc, but at first I figured it was beyond what I was willing to pay for it. I did not want a full case or TPU skin etc, as I wanted as much of my phone 'naked' as possible, while getting some minor protection from everyday bumps, dragging across tables and various Jeep related bounces. A bumper was what I wanted.
I tried a cheap one from ebay. It came within 2-3 weeks, and was what you expected. Cheap, and I felt almost decorative. A drop would knock it off, as it uses a clasp s screws. It was also very thin, so it flexed while on the phone around the port openings. I couldn't complain, as I got what I paid for.
That brings me back to this bumper. I had already decided on the Amber Orange one long ago when I dreamt of it, so I simply sent out a semi-serious email via their site with some basic inquiries to pricing, shipping, stock, etc.
-AUG 30 - Initial contact via site form, I got a response within hours via email.
-AUG 31 - I was sold, and had them invoice me, and paid it shortly after receiving it via PayPal.
-SEP 1 - I received an email stating it was shipped, provided the tracking number, and they included photos of the package, the item, the shipping label, and the invoice.
-SEP 2 - I see it has left Japan and was enroute to Canada.
-SEP 3 - Just after midnight, it clears customs, goes through Toronto, Mississauga, then heads to my town which is about an hour/hour and a half away. I missed delivery today at 11am, as I was at work...
It was packaged in an airmail envelope, which contained a brown cardboard box, which contained a store quality box container, which contained a small material bag, which contained my unit.
I was amazed how fast this whole communication to unit in hand took. Each step of the way, communication was fast and efficient, and more than adequate.
The unit itself went on like a glove. There are no gaps, no flex, and no misalignment. Even the port cutouts have a bit of fingernail space to leverage into. It looks good, feels good, sturdy, and provides a bit of a lip for me to hold late at night while tired and wandering aimlessly. No noticeable signal loss, however I am in a great area to begin with, so this has never been an issue for me.
I am extremely pleased with this purchase and product.
Cheers all.
Click to expand...
Click to collapse
have you tried devil case before making an order on allumania? iam torn between these two products. i know that japanese products are always on top quality but the devil case is much thinner and doesnt have the cut out for sdcard which is very seldom used. i want to hide those flaps as much as possible. can someone give an opinion about these two bumpers
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LucKyPunk said:
Pics???????
Don't leave us hanging
-LP
Click to expand...
Click to collapse
As soon as I get access to a camera other than the one currently inside the bumper case, will do and post.
Sorry, I should have noted that.
koshi_waza said:
have you tried devil case before making an order on allumania? iam torn between these two products. i know that japanese products are always on top quality but the devil case is much thinner and doesnt have the cut out for sdcard which is very seldom used. i want to hide those flaps as much as possible. can someone give an opinion about these two bumpers
Click to expand...
Click to collapse
I have no experience with this other case, so I can not provide you with any honest input on it.
Any luck getting another camera? Interested in seeing some real world photos of it.
The best there is
Tachikoma_kun said:
Any luck getting another camera? Interested in seeing some real world photos of it.
Click to expand...
Click to collapse
Hi all!
I have ordered this case a few weeks ago.
It went almost a same as been posted before. They were very friendly and really fast. It took about 30 minutes until they've dispatched the case.
I had a nillkin tempered glass at the front and the back. However if you gonna order this case you will see the way how they made this case the room at the back is smaller about 1-1 mm. So if you want a glass protector at the back you need to order one from them.
This is the only complication what I had, the case is perfect fit. I think it's totally worth the price.
I have attached a few pictures.
Thanks for the photos! Did you worry about scratching the phone at all? Their site says it's a possibility due to manufacturing constraints.
Scratch
Before this bumper, I have tried a cheap lovemei one, which indeed managed to scratch the phone.
I was very upset at first but what can you expect from a £4 case?
http://www.ebay.co.uk/itm/LOVE-MEI-...lePhonesCasesPouches&var=&hash=item3ce334f6ef
The Alumania is a bit pricey yes, but I just checked the phone, no new scratches so far.
I think the main difference between the two bumper is that the lovemei loose on the phone so it can move while the alumania is tight. It's important because the quality of the lovemei is cheap so it's constantly rubbing the phone that means scratching. Cheap metal bumpers are bad idea, if you care about the scratches.
Cheers
Great, thanks!
Might order me one on payday.
Does anybody know if this compatible with the D6503 model?
Sent from my D6503 using XDA Free mobile app
Lawliet918 said:
Does anybody know if this compatible with the D6503 model?
Sent from my D6503 using XDA Free mobile app
Click to expand...
Click to collapse
I have asked them the same question. But I think this is better than copy their answer here.
Related
Custom Hard Case for TFP + Dock
This is a thread exists to explore the possibility of creating our own custom thin hard case for the Transformer Prime. Currently, there is no manufacturer out there who does it so we've taken it into our own hands.
FAQ, PLEASE READ, IMPORTANT INFORMATION BELOW:
1. What is it?
This will be a thin, plastic, snap on case for the Transformer prime and the dock.
2. How can I get it?
Please fill out the following form to be included in the list of people who want the case. IMPORTANT: I'm sorry but the old survey has been deleted and a new survey with more relevant questions has been created. Rather than sending emails or PM's to everyone on the list individually to gather additional info (not everyone gave a username or email), it will just be easier for me to collect the information all at once. Plus it will weed out those that are no longer interested. https://docs.google.com/spreadsheet/viewform?formkey=dHVXVWNNa0NnVDlFRGFQVlp3aDh2cmc6MQ
3. How much will it cost?
Currently, I'm aiming for no more than $30 a case to compete with other cases out there but until I find a vendor who is willing to take on a low volume job, this is still up in the air. A preliminary quote from an online parts manufacturer had it at $100 a case! So if anyone works in the plastics or injection molding (or even rapid prototyping) industry, shoot me a PM. UPDATE: Cost will be $20 shipped. Kickstarter page will be up by 8/18/2012
4. When can I get it?
As soon as I get a plastics vendor and finalize the case dimensions and geometry, I can give you an estimated date of completion. I have a full time job and many other commitments so I apologize if I can't move this project along faster. It takes time (and a bit of sneakiness) to get my prototypes printed at work. Update: Waiting on update from manufacturer on the timeline.
5. What colors will this be available in?
Again, once I get a plastics vendor, I can see what colors the majority of us want.
LAST NOTE: Please be patient. I have no desire to abandon the xda community and your interest in this project, especially when you have all been so supportive. With that said, I'm only one man doing this in the little spare time I have....not to mention it's my first time being an active participant in xda (look at my post count) as well as designing, manufacturing, and distributing a product all on my own. So give me some time, and those that are willing to wait will be rewarded.
UPDATES
All past posts have been reorganized, with the most recent post being at the top:
--EDIT 8/19
Kickstarter has been submitted for approval! Check out the link here! This will be live (with a video!) once kickstarter approves the project.
--EDIT 8/11
Kickstarter Postponed to August 18 because Amazon Payments account registration (required to start a kickstarter) takes 7 days. This is at the latest, may have this live earlier since I registered this past Thursday.
Stay tuned. Will update thread as soon as kickstarter goes live. Everything is ready. Thanks for your patience.
--EDIT 8/9
dear xda tfp community,
it's been a tough couple months for me (hence the lack of an update) but without getting into specific details, i no longer have access to CAD or 3D prototyping capabilities i really apologize for the lack of communication and i know many of you are eager to get a case.
before everything in life changed for me, i managed to [sneakily] backup the models i made of the case so i'm still going to finish this, even if it kills me. i won't abandon you guys, you've been understanding and supportive throughout this process
so here's the situation. my contact in china tells me it will cost $7150 in tooling costs to be able to make the case. the case itself will cost $1.60...meaning if i get 500 people to sign up, it'll be about $16 a case which is my target. bear in mind, this yields NO PROFIT for me.
the problem is that I only have 150 signups, which makes each case $50.
Unless everyone is ok with that (i doubt it) we need more people. that is where i am right now. the only solution that i can think of this is to make a kickstarter so there is financial commitment from everyone that wants in. the kickstarter will be live by THIS SATURDAY. once it goes live, i'll update this post again and will need your help to promote it to all the folks who aren't on xda. please note that the kickstarter price will be $20 a unit to account for kickstarter and amazon's fees as well as shipping.
TL;DR...life got messed up, i still love xda so this project WILL get finished. kickstarter for project will go live on saturday. sorry for being MIA.
--EDIT 6/21
Update: I've found a vendor in in China that's able to produce these for an agreeable cost! I just received a quote so it will still take time for them to produce the tooling needed to make the cases.
Once I get a prototype returned from them to sample the material and ensure it's to spec (and post pics), I'll set up a kickstarter so people can fund the order for the cases. Or i might just purchase a bunch and sell it that way since kickstarter actually charges a percentage for all successfully funded projects.
TLDR: FOUND VENDOR. WILL UPDATE WITH CONCRETE TIMELINE ONCE CASE MATERIAL IS VALIDATED.
--EDIT 5/8
Finally have a case that fits. Here are some pictures...next task is to have the dock case made. Case thickness has been reduced to 1.75mm. I think i might push it down to 1mm but we'll see. 3D prototyping material isnt too strong but I'm pretty sure our finished production case will be 1mm or thinner.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
--EDIT 4/24
Finally got the prototypes! here are the pictures. The scale is a bit off so they didn't really fit perfectly but since I have a physical object in my hands, nailing down the dimensions and having it perfectly fit will be easier from here on out. I will tweak the model and have another round printed out for next monday, when I will be in the office. Until then, enjoy! (By the way, i will be sending out a survey for colors and textures soon so everyone who filled out the google form, look out for a message! If you haven't filled it out, click here: https://docs.google.com/spreadsheet/viewform?formkey=dHUxa3B2U0FsX01vOXNodVBack44S2c6MQ)
--EDIT 4/20
Yea I know it's not 4/20 in the US yet, but I'm overseas in Switzerland where it is 4/20. Plus i couldn't wait until tomorrow to update so I'm doing it now
Here's the picture of the dock case finally! I know it looks pretty simple but if you take your dock and flip it over, you'll notice the curves are all blended into each other and arent too straightforward. Plus i'm measuring it all with a caliper and ruler, nothing else. No 3D models to go off of...it's quite difficult!
1. Overall view
2. Side view
3. I made the chamfer for the SD card slot opening small so it would be more recessed to prevent any SD cards from popping out.
4. Added a Macbook-esque cutout to make it easier to open and close the dock+tablet.
ANDD here's the two pieces together. Random colors to differentiate between the two, not actual production colors (though if the masses vote for it, we can certainly see if this matte metallic blue would be possible)
I sent this off to be printed and should have it by Monday the 30th when I finally return to the States. My coworker should be bringing the tablet side of the case over to where I am by next Monday so I should have pictures then!
Until then, remember to fill out this form and to hit the thanks button if you can!
[/COLOR]https://docs.google.com/spreadsheet/viewform?formkey=dHVXVWNNa0NnVDlFRGFQVlp3aDh2cmc6MQ
--EDIT 4/19
Don't worry, I haven't forgotten about this. I'm currently in Switzerland until the end of the month which is why I haven't been able to take pictures of the prototypes which are finished (how frustrating!) and sitting on my desk in Jersey. I'll try to see if I can get my coworker to bring them next week when he comes. For now, I will have pictures of the Dock model done by tomorrow so stay tuned!
Thanks for all the support everyone! 78 of you have already signed up which is great considering I was originally just going to print a case just for myself! Remember to keep filling out this form if you want in:
[/COLOR]https://docs.google.com/spreadsheet/viewform?formkey=dHVXVWNNa0NnVDlFRGFQVlp3aDh2cmc6MQ
Once I have verified the prototype will work, I will begin taking votes on the surface finish/colors/configurations etc.
--EDIT 4/13
3D printer at work apparently failed twice to print it. Tech guy said he can have it by monday, but I will be out of the country for work from the 15th until the 30th. I know i promised pictures by today...but unfortunately, unless you want pictures of failed print jobs, I won't be able to get pictures until the 30th.
Fret not though!... instead I will be working hard during the next two weeks to get models of the dock and other variations (origami cover model, one with a kick stand etc) done as well and submit those models for printing so that I can have them all on the 30th. Consider this delayed gratification...you'll get them all at once instead!
On a side note, I do not own an origami cover and can't accurately measure dimensions from pictures so if someone has one that they can do measurements for me for, shoot me a pm
--EDIT 4/11/12
I've created a form for those interested...this will be my point of reference for who might be interested so please fill it out if you want in. As of right now, I'm focusing on making a case that would fit with the dock. If I have time later, I will consider the other requests of having built in stands or ones compatible with the origami cover.
[/COLOR]https://docs.google.com/spreadsheet/viewform?formkey=dHVXVWNNa0NnVDlFRGFQVlp3aDh2cmc6MQ
Also, as promised, here are some quick teaser pics of the case. Wall thickness is about 2.25mm (Will be thinner if we use different plastic...the 3D printer uses soft plastic so I had to beef up the thickness a bit. Expect final wall thickness to be sub 1.5mm). Also sent my design in to be printed by this Friday. Hit the thanks button if you can! This took a bit of time to mock up and 3D print material ain't cheap!
Original Post:
Just wondering if anyone would be interested in a custom, thin, hard case for the prime and the dock. No one makes a thin case...they're all either leather slip-in type cases or bulky rubber+plastic cases that dont show off how attractive and thin the prime is.
I'm thinking along the lines of this:
http://www.amazon.com/Ultra-iPhone-Transparent-Clear-Around/dp/tech-data/B002NGEFSC
Basically something that's thin and keeps the curves and the form factor of the prime that will stop it from scratching and whatnot. I have a 3D printer at work and would be fine with designing a model of it and testing it out. Once i have the form factor down and there's enough interest, I could set up a kickstarter or send it off to be made in bulk. I'll be posting pictures of the progress on this original post once i get my design done.
--edit: doesn't have to be clear either. im sure we can kick around ideas like this: https://www.speckproducts.com/tablet-ipad-cases/ipad-2-cases/pixelskin-hd-wrap-for-ipad-2.html ...especially if speck isn't going to do it.
If its possible, I'm down
In like Flynn! As much as I like my Poetic case, I really wish there was a simple & thin case like the HP TouchPad ones or even the iPad1 OEM case. As long as it can stay installed while the TFP is docked I'm all for it. I had briefly considered the origami Asus cover but having to remove it every time I want to dock it just wasn't for me.
Would be very much interested in a thin sturdy non-leather case that would provide various viewing angles.
OMG I would LOVE this!
And if you somehow got it to work with the keyboard, that'd be amazing :O
This would be amazing. But would it be possible to include a kickstand? If not I'd still be interested.
I'd certainly be interested. Subscribed.
it sounds like a good idea.
Sent from my Transformer Prime TF201 using xda premium
shipeci nte
Would be interested for sure. Maybe a frosted matte finish....
Me 2, +1
It sounds like a great idea. I'm in. I've been thinking of this same thing but none available.
Don't mix all in one. Maybe produce more than one for separate functions.
One minimalist slim snap on for max protection and form factor.
One compatible with dock
One that is like the speck which allows for front and back cover and angled typing or kick stand angle.
I know its ambitious but I think your onto something pretty serious here mate. Show us some mock ups.
Cheers.
Yeah and make it compatible with the transleeve. I know it six but I'm hoping an aftermarket one will be made
Sent from my PG86100 using Tapatalk
been looking for something like this.. with kickstand will be nice +1
What kind of order size would you need to produce and what price point would work out for you?
I'm certainly interested. There are tons of cases that work with the dock, so I would personally focus on tablet only since the idea here is to stay slim. Another option to clear could be a thin, textured black plastic like some of the iPad cases have to aid in grip, though I'm not sure that would be possible on a 3D printer.
Thanks,
Ben
*edit*
Couple of thoughts if you decide to go down this road:
Make sure the gap around the charger port is large enough for the USB dongle for those not using docks
Watch out for the headphone jack, too, since many connectors are slightly wider than standard
A single hole around the flash and camera lens will keep from shadowing the lens when the flash goes off (I.E. don't make two holes)
I can take a picture, but I have an iPad case similar to this I picked up at Five Below. It "clips" on the edges, very slim, and probably an easy model for a 3D printer
Fmstrat said:
What kind of order size would you need to produce and what price point would work out for you?
I'm certainly interested. There are tons of cases that work with the dock, so I would personally focus on tablet only since the idea here is to stay slim. Another option to clear could be a thin, textured black plastic like some of the iPad cases have to aid in grip, though I'm not sure that would be possible on a 3D printer.
Thanks,
Ben
*edit*
Couple of thoughts if you decide to go down this road:
Make sure the gap around the charger port is large enough for the USB dongle for those not using docks
Watch out for the headphone jack, too, since many connectors are slightly wider than standard
A single hole around the flash and camera lens will keep from shadowing the lens when the flash goes off (I.E. don't make two holes)
I can take a picture, but I have an iPad case similar to this I picked up at Five Below. It "clips" on the edges, very slim, and probably an easy model for a 3D printer
Click to expand...
Click to collapse
Thanks for all the suggestions guys. I will updated the original post when I get mockups and a prototype printed out.
No worries on the ports, I will be making very generous chamfers around each of the openings to allow for a variety of peripherals.
As for now, I'm focusing on making a thin case for the tablet and the dock combined but there's no reason why we can't have other variations.
preferably with some sort of lock for the microsd slot, or just leave it covered (easier) for security since some ppl said that they lost their microsd that jumped out by itself.
I would buy something like this if someone made it, preferably in clear TPU.
If someone made something like this that also included a screen cover similar to the Transleeve or Apple's smart cover, I would buy 2 or 3 (make sure it stays over the screen with a snap or magnets!)
emilgue said:
preferably with some sort of lock for the microsd slot, or just leave it covered (easier) for security since some ppl said that they lost their microsd that jumped out by itself.
Click to expand...
Click to collapse
Thought about this too, but if the chamfer on the opening for the card is small enough, you would retain access to the card without compromising on security. That way you wouldnt need to remove the cover every time you wanted to swap the card
Anyway, we'll see once i print out a prototype
I would love to have a clean case for my prime and dock. I have a bulky one that works but its huge. just something to cover it while its closed and you can still remove it from the dock and put it back with out extra steps.
Yea a clear one like the one in the apple photo wuod be nice.
Sent from my Transformer Prime TF201 using Tapatalk
I found the Lovemei aluminum bumper while checking for the spigen neo. I was so taken away by the minimalistic approach that I immediately ordered one although I usually prefer shopping in brick and mortar stores. But accessories are for the N3 are currently a little sparse there, so I got my spigen bounce via amazon.
Although I like the bounce, I prefer the more rubbery grip of the note 3s back cover and I often get the phone out of the bounce at home.
I'm really excited how it turns out.
I'm curious whether or not I like the fact the camera lens will be more exposed than when using a case that completely covers the back of the phone. What I disliked so far about any of the cases I used on any device so far is, that usually the headphone connectors of better headphones don't fit through the cases (I have a sennheiser and yamaha over the ears for home and a pair of shures for on the road, and only the yamaha will fit without a slim adapter).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This looks nice and all but the problem is when that time comes when you have to pull the battery you're screwed if you dont carry the screw driver with you. I had that issue once with my Note II
I ordered this bumper for the Note 3 so I will report on it when I receive it.
http://www.ebay.com/itm/321226071402?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
You should beware that this bumper doesn't have a hole for the mic(?) on the right side-bottom area of the phone. I ordered this from ebay thinking it was an even thinner version but it turned out to be the LOVEMEI bumper. Mine came with a few light scratches here and there and I decided to drill a hole for the before mentioned area my self.
The fit overall is decent and I don't mind using it despite some of these flaws because its the slimmest and clean looking bumper I've found so far.
mrdiggz said:
You should beware that this bumper doesn't have a hole for the mic(?) on the right side-bottom area of the phone. I ordered this from ebay thinking it was an even thinner version but it turned out to be the LOVEMEI bumper. Mine came with a few light scratches here and there and I decided to drill a hole for the before mentioned area my self.
The fit overall is decent and I don't mind using it despite some of these flaws because its the slimmest and clean looking bumper I've found so far.
Click to expand...
Click to collapse
Ooops. I didn't notice the missing hole. But yes, I think drilling an additional hole shouldn't be that bad. I hope mine doesn't arrive scratched. I'd rather scratch it myself...
Amazons webpage tells me that it was sent. Arrival time is estimated somewhere between Nov. 5th and 11th. But if it was sent today, I'd think it could also arrive about next Wednesday (would be great).
eldhojohn said:
G.LIDER Razer ALUMINUM Bumper, http://dx-box.com/g-lider-razer-aluminum-bumper-for-samsung-galaxy-note-3-n9000.html
Click to expand...
Click to collapse
Do you have one of these? I'd like to know if there's a lip around the front that prevents the phone from laying on the glass.
Sent from my SAMSUNG-SM-N900A using xda app-developers app
HappyPessimist said:
Do you have one of these? I'd like to know if there's a lip around the front that prevents the phone from laying on the glass.
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Click to expand...
Click to collapse
also would know how this bumper is
I've ordered my bumper last Saturday. On Sunday, Amazon tells me that the product was shipped via standard conditions. And the only information I got so far is, that delivery is supposed to happen..... Between Nov. 5th and 22nd.
Well, ok. Snail mail and 5th is somewhat acceptable. But the 22nd? They got to be kidding....
I like how these aluminum bumpers look but is it true that they effect reception? Anyone notice?
currently I am using this Holster case for my N3 but after getting known to this aluminium bumper now just wondering to go for one....but the only issue I would be having with it will be when I need to take out my battery then that could be a tedious task for me and for that I need to carry a screw driver with me all the time.....but I dont think its quite often to remove or to take out the battery......so would be getting the one...
I ordered mine got it, installed it and dropped 2 bars of signal.
I did multiple speed tests and lost 85% of my LTE speeds due to the bad signal.
You cant take the rear cover off,without a tiny screw driver. (the ad said you could)
has sharp edges. (I was going to sand and polish mine like chrome.)
so ya, I have a $23 dollar paperweight.
Stay away from ANYTHING metal on these devices.
---------- Post added at 09:10 AM ---------- Previous post was at 09:09 AM ----------
Mikegrmn said:
I've ordered my bumper last Saturday. On Sunday, Amazon tells me that the product was shipped via standard conditions. And the only information I got so far is, that delivery is supposed to happen..... Between Nov. 5th and 22nd.
Well, ok. Snail mail and 5th is somewhat acceptable. But the 22nd? They got to be kidding....
Click to expand...
Click to collapse
Send it back or Cancel the order trust me!
I screwed myself by ordering from a chinese site caseswill. BOO
Jimmy2u said:
currently I am using this Holster case for my N3 but after getting known to this aluminium bumper now just wondering to go for one....but the only issue I would be having with it will be when I need to take out my battery then that could be a tedious task for me and for that I need to carry a screw driver with me all the time.....but I dont think its quite often to remove or to take out the battery......so would be getting the one...
Click to expand...
Click to collapse
Depends on how often you want to swap your battery. My razr HD has a non removeable battery and it lastet between 2-3 days for me. With my N3 I get about 3-4 days. So in my case, I don't feel like I need to take off the cover often. After reading some posts here, I'm more concerned that reception could get bad. But I guess I'll see how it works. If it's getting too bad, I can still go back to my bounce case. Although I really do like what I see on the product photos. But this one has to be seen with the real product, too.
Mikegrmn said:
I've ordered my bumper last Saturday. On Sunday, Amazon tells me that the product was shipped via standard conditions. And the only information I got so far is, that delivery is supposed to happen..... Between Nov. 5th and 22nd.
Well, ok. Snail mail and 5th is somewhat acceptable. But the 22nd? They got to be kidding....
Click to expand...
Click to collapse
Mikegrmn said:
Depends on how often you want to swap your battery. My razr HD has a non removeable battery and it lastet between 2-3 days for me. With my N3 I get about 3-4 days. So in my case, I don't feel like I need to take off the cover often. After reading some posts here, I'm more concerned that reception could get bad. But I guess I'll see how it works. If it's getting too bad, I can still go back to my bounce case. Although I really do like what I see on the product photos. But this one has to be seen with the real product, too.
Click to expand...
Click to collapse
6 Speed tests here at work, NO Aluminum bumper.
LTE on 3 bars solid inside in somewhat over utilized tower.
Consistent 7-7.98mb downloads recreated everytime. same results.
Put the aluminum bumper back on
rebooted.
3 bars went to 1 bar.
6 More speedtests.
Consistent 2.50-3.00mb download.
I repeated these rounds of testing twice.
that makes 24 total tests with consistent results everytime.
deathshead said:
6 Speed tests here at work, NO Aluminum bumper.
LTE on 3 bars solid inside in somewhat over utilized tower.
Consistent 7-7.98mb downloads recreated everytime. same results.
Put the aluminum bumper back on
rebooted.
3 bars went to 1 bar.
6 More speedtests.
Consistent 2.50-3.00mb download.
I repeated these rounds of testing twice.
that makes 24 total tests with consistent results everytime.
Click to expand...
Click to collapse
Ooops. I'll see once I receive my bumper. At work this shouldn't be an issue, but at home, reception is already somewhat flaky. I don't care much about download speeds, but the phone part should still be working ok. I'm using my phone more for reading, music, navigation, guitar tuner and such. So downloads are mostly via wifi at home.
You're right sirrrrr
deathshead said:
6 Speed tests here at work, NO Aluminum bumper.
LTE on 3 bars solid inside in somewhat over utilized tower.
Consistent 7-7.98mb downloads recreated everytime. same results.
Put the aluminum bumper back on
rebooted.
3 bars went to 1 bar.
6 More speedtests.
Consistent 2.50-3.00mb download.
I repeated these rounds of testing twice.
that makes 24 total tests with consistent results everytime.
Click to expand...
Click to collapse
I had just received the bumper like 5 mins ago. And you're right sir, the signal dropped like 60%. I am so pissed. The worst part is I ordered 5 of them, two arrived, three on the way
Well, mine didn't arrive yet. The supplier of the bumper is not amazon itself, and as the part has already shipped last Sunday, I cannot cancel my order anymore. So I'll wait and try and then see how much it affects my day to day activities. If I don't have any reception anymore or if my battery gets drained too fast, I'll revert back to my spigen bounce. Otherwise I don't care too much. I mean if you have 5 or 3 bars doesn't matter that much as long as everything works the same, at least I think so.
deathshead said:
6 Speed tests here at work, NO Aluminum bumper.
LTE on 3 bars solid inside in somewhat over utilized tower.
Consistent 7-7.98mb downloads recreated everytime. same results.
Put the aluminum bumper back on
rebooted.
3 bars went to 1 bar.
6 More speedtests.
Consistent 2.50-3.00mb download.
I repeated these rounds of testing twice.
that makes 24 total tests with consistent results everytime.
Click to expand...
Click to collapse
Tested Love Mei alu bumper and I did NOT see any reception decrease!
Tested on HSPA+ network, Vodafone Netherlands.
Download/Upload: 4.5/1.0 Mbps (with or without the case)
Both time 2 bars (indoors)
Just a shot in the dark here, but does anybody know if these or any bumper will work with s view cover?
I suspect the answer is no, but figured I'd ask anyway. I like the look but dislike that the sides of n3 are exposed if I should d**p it.
Sent from my SAMSUNG-SM-N900A using xda app-developers app
nespid said:
Just a shot in the dark here, but does anybody know if these or any bumper will work with s view cover?
I suspect the answer is no, but figured I'd ask anyway. I like the look but dislike that the sides of n3 are exposed if I should d**p it.
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Click to expand...
Click to collapse
This is something I was afraid of, too. But actually, the back cover is replaceable and I use a screenprotector, too. I hate small scratches on my glass and prefer having them on a sheet of film that I can remove should I want to.
As the S-view cover is hinged on the back cover, I'd bet that using this accessory won't work.
I meant to ask if they will work in terms of fitting on the phone in conjunction with the s view cover.
Sent from my SAMSUNG-SM-N900A using xda app-developers app
nespid said:
I meant to ask if they will work in terms of fitting on the phone in conjunction with the s view cover.
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Click to expand...
Click to collapse
That's what I thought I had replied to. The bumper goes all around the device, and the "hinge / spine" of the s-view cover will most likely be attached so close to the device that it would need to be under (between the bumper and the devices side trim) the bumper. I think that the bumper won't fit then anymore because it's also made to fit tight without adding bulk.
The S-view cover replaces the back of the device, so the hinge will be right where the bumper needs to go. I don't know how I should try to explain myself differently. If you think I misunderstood, I'll be more than glad to make a sketch so it gets more clear. Maybe we talk about the same but interpret each others writing differently.
Well, i was looking for Love Mei cases reviews around the accesories forum, but it seems that no one ever talk about this case, so i'm opening this thread to show this beautoful case, and ask if any one has see it.
on the official webpage says that it cost $US88, but i have seen it in other online stores in half of the price.
http://www.aliexpress.com/item/Love...uminum-Case-For-Galaxy-Note-3/1634195007.html
http://www.amazon.com/Shockproof-Dustproof-Waterproof-Snowproof-Protective/dp/B00ICCV9M6/ref=sr_1_61?s=wireless&ie=UTF8&qid=1392161382&sr=1-61&keywords=love+mei+note+3
http://www.ebay.com/itm/Aluminum-Metal-Gorilla-Waterproof-Case-Cover-For-Samsung-Galaxy-Note3-Love-Mei-/261379032367?pt=US_Cell_Phone_PDA_Cases&var=&hash=item3cdb67852f
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here its the demo video for the Galaxy S4 case. this is almost the same, but with slim waist
Review from the regular Powerfull Case. this is the same but with a curvey slim waist shape. all the protection are the same:
And here is the official web:
http://www.lovemeicase.com/pro.asp?id=45
Looks nice but I wonder if it will fit the wireless charge back that I have. I also notice it needs two screws so for those who change batteries often, you'll have to carry the screwdriver. Otherwise, it looks awesome. Thanks for the link!
Are you sure that this case is as resistant as the one on the video? Because I'm thinking about getting one, and I like this one more than the one on the video, but if you can't throw it on the floor and "drive a car over it", what's the point of it?. It looks great but it's really big and Note 3 is already big. So if you don't get perfect protection than there's no point of getting one..
thx for the link
if it's from ali it's probably a fake.
DeathBlimp said:
if it's from ali it's probably a fake.
Click to expand...
Click to collapse
Ali's now have a buyer protection policies, that if you dont receive whats was offered to you, you can ask for a full refound, or keep the object and receive a partial refound.
http://www.aliexpress.com/buyerprotection/index.html
hrvoje334 said:
Are you sure that this case is as resistant as the one on the video? Because I'm thinking about getting one, and I like this one more than the one on the video, but if you can't throw it on the floor and "drive a car over it", what's the point of it?. It looks great but it's really big and Note 3 is already big. So if you don't get perfect protection than there's no point of getting one..
Click to expand...
Click to collapse
Hi, yes, its the same technology, but with another shape. here its the video of the small waist, but for the iPhone 5:
do, im not sure if it can resist a car, or the motorcycle like on this video, but its a rugged case and it will protect your $700 bucks inversion.
hope it doesn't hurt reception and gps like the original love mei case does. I bought the regular one and while it's badass and crazy protection, I can't use it due to reception getting knocked down.
****motions said:
Hi, yes, its the same technology, but with another shape. here its the video of the small waist, but for the iPhone 5:
do, im not sure if it can resist a car, or the motorcycle like on this video, but its a rugged case and it will protect your $700 bucks inversion.
Click to expand...
Click to collapse
I thought about getting one for the summer... because i think it's to massive to carry it all the time. Please write a small review ( just if all of the signals work, and are you ok with the case) if you order it.
I like the gold version, any stock in the UK?
****motions said:
Well, i was looking for Love Mei cases reviews around the accesories forum, but it seems that no one ever talk about this case, so i'm opening this thread to show this beautoful case, and ask if any one has see it.
on the official webpage says that it cost $US88, but i have seen it in other online stores in half of the price.
http://www.aliexpress.com/item/Love...uminum-Case-For-Galaxy-Note-3/1634195007.html
http://www.amazon.com/Shockproof-Dustproof-Waterproof-Snowproof-Protective/dp/B00ICCV9M6/ref=sr_1_61?s=wireless&ie=UTF8&qid=1392161382&sr=1-61&keywords=love+mei+note+3
http://www.ebay.com/itm/Aluminum-Metal-Gorilla-Waterproof-Case-Cover-For-Samsung-Galaxy-Note3-Love-Mei-/261379032367?pt=US_Cell_Phone_PDA_Cases&var=&hash=item3cdb67852f
Here its the demo video for the Galaxy S4 case. this is almost the same, but with slim waist
Review from the regular Powerfull Case. this is the same but with a curvey slim waist shape. all the protection are the same:
And here is the official web:
http://www.lovemeicase.com/pro.asp?id=45
Click to expand...
Click to collapse
adds to much bulk, I'll pass
DeathBlimp said:
if it's from ali it's probably a fake.
Click to expand...
Click to collapse
So buy it on amazon then.
I just had a chat with the reseller in Chinese. It's a Chinese designed and manufactured product, which means it is quality. I ordered one and will let you guys know.
votum said:
So buy it on amazon then.
I just had a chat with the reseller in Chinese. It's a Chinese designed and manufactured product, which means it is quality. I ordered one and will let you guys know.
Click to expand...
Click to collapse
cause amazon is like 20 times more expensive. so i rather try this one out to see if it's good enough. I bought it too so i'll see if it's good enough.
No one has this? Im wondering how it works. If it has any signal loss and i would love to see pictures
Sent from my SM-N900A using Tapatalk
Mayonesa said:
No one has this? Im wondering how it works. If it has any signal loss and i would love to see pictures
Sent from my SM-N900A using Tapatalk
Click to expand...
Click to collapse
I am using it right now to type this. I have been using the regular model for about two months now and the gps is the only issue I have. I just got the slim waist model from a friend today. She said that it killed her signal at her house, but she lives in the woods and only gets 2 bars at best. I live in town and I'm fluctuating between 3-4 bars all the time. I have not tried the GPS since I put the new case on. I'll upload a few pictures in just a second for those interested. I like the case a lot.
I am a police officer and I keep it in the front pocket of my outer vest. It gets rained on regularly and I just wipe the water off the screen and keep going. The silicone on the back makes it grip your dash perfect without sticking in your pocket.
I got my first off Amazon and the case I'm using now came from eBay. Both were shipped from China and it took about two weeks. Both came in nice packaging and the quality of the cases is great. I'll answer any questions you can come up with. I just discovered the thread.
Sent from my SAMSUNG-SM-N900A using Tapatalk
i read that this case has issues with people hearing you as the mic is obsructed. what complaints have you had abnout this? im sure you call supervisors and dispatch a lot?
Love Mei Note 3 Case
Well I can say for sure that this case is a TANK as far as protection goes. Now, I did contact someone from the company to make sure that the problems with the previous version of the case was fixed and he said yes. So I bought one, Black on Black.The new waist design is cool, but some of the reported problems STILL exist. NO 4G LTE inside a building or residence. I had to remove the mesh behind the ear speaker in order to hear anyone. The bottom speakers work very well. The screen most definitely is not SMUDGE or FINGER PRINT proof. I know that no screen actually is, but this screen is freak-en bad. So DO NOT GET ONE IF ANY OF THESE PROBLEMS BOTHER YOU. Especially you OCD clean screen freaks. The aluminum is just as bad with finger prints, sorry. The rubber on the back and sides is a DUST MAGNET. The phone is very heavy, but with all that said, I am very happy with buying it. I bought it through EBAY for $30.00, and it did ship very quickly from China. I wanted a heavy duty case to protect my $700.00 investment and I found it. I am a law enforcement officer and a gym rat, so this case will go through hell and back. The issues I mentioned do not bother me, but may bother some, so I hope I answered all questions.
Respectfully,
Rick Davila :fingers-crossed:
Be nice to see some pictures or a video of the new slim waist version please, nothing to be found as of yet anywhere online, aside from the official website.....
anyone who wants a yellow one, I'll sell ya mine for what I paid for it ($30). I'll pay the postage.
it is a tank and will protect like no other, but can't stand how heavy it makes it and the gps reception and cell signal is unacceptable.
I ended up buying a Kraken case for the days I need real protection and on the normal days I run the Aegis.
1tfrot said:
anyone who wants a yellow one, I'll sell ya mine for what I paid for it ($30). I'll pay the postage.
it is a tank and will protect like no other, but can't stand how heavy it makes it and the gps reception and cell signal is unacceptable.
I ended up buying a Kraken case for the days I need real protection and on the normal days I run the Aegis.
Click to expand...
Click to collapse
Can you snap some pics of the case with phone installed please? There are none online
I may just remove the metal areas that cover the antennas, if needed.....
Is your case genuine, or one of the cheaper clones?
Hello All,
I have seen lately a 'new' type of case from Rock Smart UI flip cover case for our Note 3.
The case features a transparent front cover with some kind of s-view, judging from the photos.
I made a search and did not see anyone talk about this case specifically for Note 3.
Has anyone purchased this case ? I wanted to have an idea whether the smart UI it is advertising is true or not, and the overall user experience.
Look no further, here follows the link to the product: http://www.ebay.com/itm/Rock-Smart-...Cell_Phone_PDA_Cases&var=&hash=item418571721b
Thank you guys for your input.
Nitish
PS: Please read ROCK Smart UI in thread title
I'm extremely interested in this case and will patiently await first-hand accounts and reviews!
Jubmasterflex said:
I'm extremely interested in this case and will patiently await first-hand accounts and reviews!
Click to expand...
Click to collapse
I have purchased the case a couple of days back, and I am waiting delivery. Will take some time (normally at least 2-3 weeks) to be delivered from where I host (Mauritius).
Thought maybe someone else may have been through it and willing to share the experience.
I'm also intrigued and will be purchasing it, since it's pretty inexpensive. This reminds me of a classier HTC M8 Flip cover case.
Ed Murray said:
I'm also intrigued and will be purchasing it, since it's pretty inexpensive. This reminds me of a classier HTC M8 Flip cover case.
Click to expand...
Click to collapse
How is the Rock Smart UI case implementation on HTC M8 ? Does it work as they claim it does for note 3 ?
Not sure Its made for the M8, it simply reminds me of the flip case that you get with it.
I have yet to receive this case as its shipped from China. I will let you know when I get it though
Ed Murray said:
Not sure Its made for the M8, it simply reminds me of the flip case that you get with it.
I have yet to receive this case as its shipped from China. I will let you know when I get it though
Click to expand...
Click to collapse
I dunno, looks pretty gimmicky to me.
I gotta say if there's anyone interested in this but has never used the S-View case.... its more of a burden.
I like my setup of a tempered glass protector with case more than S-View, since S-View makes the experience a whole lot slower and the extra flaps gets in the way and add extra unnecessary bulk to the unit.
But if S-View is a must, check out this guy:
http://store.androidandme.com/seidio-ledger-view-extended-with-metal-kickstand/4A22A17430.htm
Ed Murray said:
Not sure Its made for the M8, it simply reminds me of the flip case that you get with it.
I have yet to receive this case as its shipped from China. I will let you know when I get it though
Click to expand...
Click to collapse
Actually Rock does manufacture a "similar" pixelized notification case:
http://www.rockphone.cn/pdetail.aspx?ID=201408051350465
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Those look... potentially sweet! I followed a few links from the one posted, and came across this one http://www.ebay.com/itm/301288759905 which I ordered. I decided to go for that one mainly because in the pics in the actual ad (although not in the ones at the top), it appears to have built-in port covers (micro usb 3 & headphone), which is huge and should be included in many more cases. I'm currently using a super cheap, clear TPU case from ebay that I picked up due to it having that same feature. I know from experience how easily the micro usb ports can get f-ed up (not to mention the cables, my entire fairly large collection of genuine OEM cables is completely useless; I had never seen the correct voltage on my Note 8 until a started using one of the two "premium" cables that I ordered from monoprice for less than $10).
Anyways, I primarily use wireless charging with my N3, but sometimes juice up very quickly via (non OEM) micro usb 3 cable during the day. In my situation, using a case with built in port covers (vs. highly lose-able unattached micro usb 2 port covers, which are pretty much the only alternative available and inferior across the board) works extremely well for my use-case. I like to keep the port covered / protected since I don't need it for wifi charging and I don't want to end up with some problem with the port so that I can't mount it in ODIN for ex., but it's not at all inconvenient for charging via cable. Just flip the cover back (which involves sort of detaching it, because the cover part of the small flap that covers the port does insert into the port which means that it is actually a legit protective port cover, and actually superior to the built-in cover on the S5 which afaik just covers the port rather than inserting into the port at all, and breaks of pretty easily rendering to completely useless. Before finding this particular tpu skin, which I sometimes attach into a wallet case via velcro (usually whenever I go out so that I have my essential cards and phone without making sure that I had put multiple different items in my pocket... I'd order 25 packs of the micro usb 2 covers, eventually lose every one of them and order a new pack. Using this case instead has been infinitely more convenient.
Back to your regularly-scheduled topic following that advertisement from the "Cases with attached port covers are crazy useful, and it seems weird that none of the bigger case companies include that super cheap / easy mod as pretty much standard", which exists for real, but consists of only one vocal member... Has anyone who ordered one of these received it yet? If so. thoughts? Also, all cases like this need an app to work, yes? Has anyone checked that out? Any negative impact (re: battery, etc.)? Oh yeah, regarding my assumption that this one does have port covers, which, ya know, I think has some sort of value, possibly is really only based on the pics inside the sellers ad. They also list it being "dustproof" but don't specifically mention the port covers and also they don't appear to be in the picture gallery at the top of the page, but it looks like those are the same pictures that a number of different similar cases from different sellers for the ones that have a option to choose the color (black, blue, gold), so really I'm just hoping that this case is what I expect, though it was cheap enough and otherwise interesting enough to potentially just check it out, but not really end up using it. Hopefully it'll turn out that my assumptions are correct, but currently ???. Actually, I probably should have asked the seller, and suppose I will now, but I still don't regret just throwing down the order so it'll come sooner rather than waiting /increasing the delay by waiting for them respond.
The deliver range is 9/19 - 10/10, so I post some feedback when it arrives.
i love this one
I purchased the case too, from ebay ... sadly I see the item has not been shipped upto now ...
sent the seller a message, haven't had any reply since a couple of days.
hope this is not a bump ! coz I really want to have the case ...
Anyone else has received his case for a review ?
They have a video here also:
https://www.youtube.com/watch?v=uUe4rbJ4iIg
Forgot to update re: the one I ordered... it doesn't have port covers, but as it turns out (because the checkout pages and PayPal linkage are not friends with some of my browser extensions) so first time I tried to check out it didn't work. I went back to a different page and signed into my eBay account and turned off a couple extensions. I saw that there was one item in my cart, so I figured that it was the case so just went and checked out, paying much more attention to whether it was working or not than what I was buying, which actually turned out to be a TPU case exactly like the one I have / explained with the port covers, except it's translucent grey as opposed to the transparent one that I ended up getting. So I "blew" a total of three American dollar bills (except not really, because now I can just cut the port covers off of the one I like less and possibly attach it to another case somehow) so then I went back and ordered the case that I meant to. I will say about that seller though, that he both shipped and answered my question super quickly after I messaged it.
N1T15H said:
I purchased the case too, from ebay ... sadly I see the item has not been shipped upto now ...
sent the seller a message, haven't had any reply since a couple of days.
hope this is not a bump ! coz I really want to have the case ...
Anyone else has received his case for a review ?
Click to expand...
Click to collapse
My seller shipped the item two days back :laugh:
jazzmachine said:
Those look... potentially sweet! I followed a few links from the one posted, and came across this one http://www.ebay.com/itm/301288759905 which I ordered. I decided to go for that one mainly because in the pics in the actual ad (although not in the ones at the top), it appears to have built-in port covers (micro usb 3 & headphone), which is huge and should be included in many more cases. I'm currently using a super cheap, clear TPU case from ebay that I picked up due to it having that same feature. I know from experience how easily the micro usb ports can get f-ed up (not to mention the cables, my entire fairly large collection of genuine OEM cables is completely useless; I had never seen the correct voltage on my Note 8 until a started using one of the two "premium" cables that I ordered from monoprice for less than $10).
Anyways, I primarily use wireless charging with my N3, but sometimes juice up very quickly via (non OEM) micro usb 3 cable during the day. In my situation, using a case with built in port covers (vs. highly lose-able unattached micro usb 2 port covers, which are pretty much the only alternative available and inferior across the board) works extremely well for my use-case. I like to keep the port covered / protected since I don't need it for wifi charging and I don't want to end up with some problem with the port so that I can't mount it in ODIN for ex., but it's not at all inconvenient for charging via cable. Just flip the cover back (which involves sort of detaching it, because the cover part of the small flap that covers the port does insert into the port which means that it is actually a legit protective port cover, and actually superior to the built-in cover on the S5 which afaik just covers the port rather than inserting into the port at all, and breaks of pretty easily rendering to completely useless. Before finding this particular tpu skin, which I sometimes attach into a wallet case via velcro (usually whenever I go out so that I have my essential cards and phone without making sure that I had put multiple different items in my pocket... I'd order 25 packs of the micro usb 2 covers, eventually lose every one of them and order a new pack. Using this case instead has been infinitely more convenient.
Back to your regularly-scheduled topic following that advertisement from the "Cases with attached port covers are crazy useful, and it seems weird that none of the bigger case companies include that super cheap / easy mod as pretty much standard", which exists for real, but consists of only one vocal member... Has anyone who ordered one of these received it yet? If so. thoughts? Also, all cases like this need an app to work, yes? Has anyone checked that out? Any negative impact (re: battery, etc.)? Oh yeah, regarding my assumption that this one does have port covers, which, ya know, I think has some sort of value, possibly is really only based on the pics inside the sellers ad. They also list it being "dustproof" but don't specifically mention the port covers and also they don't appear to be in the picture gallery at the top of the page, but it looks like those are the same pictures that a number of different similar cases from different sellers for the ones that have a option to choose the color (black, blue, gold), so really I'm just hoping that this case is what I expect, though it was cheap enough and otherwise interesting enough to potentially just check it out, but not really end up using it. Hopefully it'll turn out that my assumptions are correct, but currently ???. Actually, I probably should have asked the seller, and suppose I will now, but I still don't regret just throwing down the order so it'll come sooner rather than waiting /increasing the delay by waiting for them respond.
The deliver range is 9/19 - 10/10, so I post some feedback when it arrives.
Click to expand...
Click to collapse
Did you have another source for this case? Looks like the item has been removed and the link no longer works.
Thanks
which one has port covers? I am interested in ordering one but none of the ones I see have port covers.
Ed Murray said:
Did you have another source for this case? Looks like the item has been removed and the link no longer works.
Thanks
Click to expand...
Click to collapse
Here's one that I actually just ordered http://www.ebay.com/itm/251471912476?_trksid=p2060778.m2749.l2649&ssPageName=STRK:MEBIDX:IT (by accident, heh... I was try to order a different cheap case via "Buy it Now" but one of my Firefox extensions was preventing the whole PayPal linkage popup thing, so I just opened the eBay app on my tablet, saw that there was 1 item in my cart, so I assumed it was the case I was just trying to buy, and didn't notice until I had already checked out that the cost was only $3... guess I had put this case in my cart but decided to get the clear one that I have now instead, but this one was and is still active, looks reasonably solid and it cost freakin 3 bucks! It hasn't arrived yet, nor has the $10 "Rick Smart" case that I intended to order, but I'm actually glad that I accidentally ordered this one too... if I don't like it more than my current clear one, I can just snip the port covers off and glue them to my Seidio wallet case, which was my former favorite, but I just didn't like the fact that it provided no protection for the bottom or top side beyond the corners).
Anyway, I think I initially ordered the clear one over this one because it was shipped from the U.S. and I'd get it sooner vs this one from China. More good news: It's currently 5% off, lowering the price from $1.95 to $1.85!! If you don't mind waiting, I really doubt you could do better for less than $4! As far as shipping is concerned, it's a flat $1.99, I ordered it on 9/5, the seller shipper right away, and the estimated delivery is between 9/17 and 10/1 (I'm predicting closer to the former, since the seller seemed totally on top of it).
If you want one sooner though, there are several on eBay if you search for something like "Galaxy Note 3 case with port covers" or variation of that. You can also put "dustproof" or "waterproof" into your searches, but that increases the likelihood that a higher percentage of your results will be cases that FULLY cover the phone via mutli-layered cases with a cover for the top that usually has a built in termpered glass screen cover. Actually many of those look really nice, and I'd likely order one if I didn't already have a tempered glass screen protector attached. There are TONS of widely varying cases on eBay, if you just search for EXACTLY what you're looking for, there's a pretty good chance that your results will contain several options of exactly what you're looking for to choose from. If the pictures leave some doubt re: whether the case is exactly what you want, just msg the seller. If they don't answer by like, the next day, just cross that option off your list and pick a different one.
BTW, you bastard! Looking through ebay's selection of cases to write this post, It's pretty much a certainty that I'll come across one that I definitely don't need, but "is super pimped and clearly much better than ALL the other ones I already have... for only x $'s? Buy it NOW button!" Already have a few contenders...
jazzmachine said:
Here's one that I actually just ordered http://www.ebay.com/itm/251471912476?_trksid=p2060778.m2749.l2649&ssPageName=STRK:MEBIDX:IT (by accident, heh... I was try to order a different cheap case via "Buy it Now" but one of my Firefox extensions was preventing the whole PayPal linkage popup thing, so I just opened the eBay app on my tablet, saw that there was 1 item in my cart, so I assumed it was the case I was just trying to buy, and didn't notice until I had already checked out that the cost was only $3... guess I had put this case in my cart but decided to get the clear one that I have now instead, but this one was and is still active, looks reasonably solid and it cost freakin 3 bucks! It hasn't arrived yet, nor has the $10 "Rick Smart" case that I intended to order, but I'm actually glad that I accidentally ordered this one too... if I don't like it more than my current clear one, I can just snip the port covers off and glue them to my Seidio wallet case, which was my former favorite, but I just didn't like the fact that it provided no protection for the bottom or top side beyond the corners).
Anyway, I think I initially ordered the clear one over this one because it was shipped from the U.S. and I'd get it sooner vs this one from China. More good news: It's currently 5% off, lowering the price from $1.95 to $1.85!! If you don't mind waiting, I really doubt you could do better for less than $4! As far as shipping is concerned, it's a flat $1.99, I ordered it on 9/5, the seller shipper right away, and the estimated delivery is between 9/17 and 10/1 (I'm predicting closer to the former, since the seller seemed totally on top of it).
If you want one sooner though, there are several on eBay if you search for something like "Galaxy Note 3 case with port covers" or variation of that. You can also put "dustproof" or "waterproof" into your searches, but that increases the likelihood that a higher percentage of your results will be cases that FULLY cover the phone via mutli-layered cases with a cover for the top that usually has a built in termpered glass screen cover. Actually many of those look really nice, and I'd likely order one if I didn't already have a tempered glass screen protector attached. There are TONS of widely varying cases on eBay, if you just search for EXACTLY what you're looking for, there's a pretty good chance that your results will contain several options of exactly what you're looking for to choose from. If the pictures leave some doubt re: whether the case is exactly what you want, just msg the seller. If they don't answer by like, the next day, just cross that option off your list and pick a different one.
BTW, you bastard! Looking through ebay's selection of cases to write this post, It's pretty much a certainty that I'll come across one that I definitely don't need, but "is super pimped and clearly much better than ALL the other ones I already have... for only x $'s? Buy it NOW button!" Already have a few contenders...
Click to expand...
Click to collapse
Haha I can no longer trust myself to look through pages of cases. I have 7 cases now. Damn prime membership and free two day shipping gets me every time. Thank you very much
Has anyone gotten this case yet?
polo2883 said:
Has anyone gotten this case yet?
Click to expand...
Click to collapse
Not yet for me ... I think mine will be delivered last ...
As the title says. I just picked up my new GS7 last week. And while I have always liked the looks of my phones in the past, I gotta admit, I always thought the iPhones looked better. Dating back to my first smartphone, the Blackberry Storm (if any of you remember that mess), I had always thought the iPhone was the better looking of the smartphones. When my upgrade was up from the Storm, VZW was HEAVILY advertising this new phone called the Droid. I almost got the Storm 2 because at the time, I didn't think the Storm was a bad phone, but on a whim bought the Droid I saw during every commercial break. It opened my eyes to how great Android was, and how garbage BB touchscreens were. I've always used Androids since. I've had a few iPhones here and there, but I just HEAVILY preferred the Android experience over iOS and got rid of my iPhones within a week or 2 of originally acquiring them. But now, finally, I can say that my Gold Platinum colored Galaxy S7 even looks way sexier than any iPhone. I seriously love the way this phone looks. I also always carry my phone in my pocket. I've tried belt-clips, but I always would get them caught on counters and stuff, typically resulting in breaking the clip and often damaging my phone. That in mind. I'm looking at outfiiting my phone with a slim profile case, not only for pocket comfort, but also to keep as much of the original look of the phone as possible. So I'm looking at gold and clear cases primarily. I also don't want a lot of grip, as before, I've had times that I had a VERY grippy case that when I thought I slid my phone in my pocket, it actually gripped to the edges of the pocket and fell when I wasn't paying much attention. Sorry for the novel background. But on to the meat and potatoes of the post:
I'm looking at getting a tempered glass screen protector and case. As far as the screen protector, I'm 90% certain that I've decided on the Coral Tempered Glass with the matching Gold top and bottom. I've always used ZAGG before and have no complaints with them. But their Contour Glass model isn't out yet and want to get something ASAP. If anybody has any experience with the Coral, please chile in and let me know how it was. Or if anybody else has a tempered glass screen protector they really love that may sway me, also, please chime in and let me know of your experience.
Now. On to the cases. I found a couple I liked just on Amazon, and then read that some users found some they really liked on ebay, so checked there and found a few more I'm very interested in. The beauty with the eBay ones is they're dirt cheap. But the down side is, I don't know how well they will fit and/or protect my phone. And coming from typically China'Hong Kong, it'll take a while to receive them. So I've narrowed it down to 5 that I really like (I honestly could easily make it 10, but that's too ridiculous)....
So. Number 5:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.ebay.com/itm/28179505052...49&var=580958289146&ssPageName=STRK:MEBIDX:IT
-at $7.99 it's incredibly cheap. It's a very good looking case. Although the pics don't show the S7 version. All the other versions look VERY well made. Even have a stock-looking logo of the phone on them. Even the other color schemes look tempting like the black/gold or white/gold. In all, it looks very refined for an eBay case of this price range. I don't think I'd rate it as 5th place on my considerations really. I really like them all. This one is an especially clean looking case though.
Number 4:
http://www.amazon.com/dp/B01B1V3QJ8/ref=twister_B01F341F92?_encoding=UTF8&psc=1
-at $29.95, it's probably the most expensive on my list. But I've heard great things about UAG. It looks rugged. But that also detracts from the natural look of the phone I want to show off, even in the ICE (clear) color.. So it's a bit of a double-edged sword to me.
Number 3:
http://www.ebay.com/itm/20152550018...49&var=500749182756&ssPageName=STRK:MEBIDX:IT
-at $15.19, this falls about right in the middle of the price range. Though it does cover the entire back of the phone, it still looks pretty close to the regular back of the phone while providing low profile protection.
Number 2:
http://www.ebay.com/itm/27216969983...49&var=570981080744&ssPageName=STRK:MEBIDX:IT
-at $10.98, it's still very cheap. It's 2-piece metal screw-together with a clear back. So it's very low-profile, has a gold protective bumper with a simple clear backing to show the phone and not the case. So I really like the idea of this case
Number 1:
http://www.ebay.com/itm/38154689041...49&var=650654760726&ssPageName=STRK:MEBIDX:IT
-at $14.99 it also comes right in the middle of the price range. And while it also covers the entire back of the phone, it looks like it's the matching color. And I like that it's a brushed metal which won't get messed up by being kept in my pocket. And it still provides protection while keeping a low profile. Plus, it's a brand I've heard good things about, so I'm not worried at all about any fit or performance.
so anybody with any experience with these, please let me know how you liked them. Or anybody else that has any opinions on the cases, let me know what you think of them. I REALLY like em all and my OCD is making it very hard for me to choose just one. Thanks for reading, and thanks ahead of time for your replies
Laventura said:
check this out http://forum.xda-developers.com/galaxy-s7/accessories/amazon-rated-case-otterbox-uga-speck-t3373758
Click to expand...
Click to collapse
thanks for the link but I've already read that whole thing. That's actually the direct reasoning behind my considering the UAG that didn't fit my criteria nearly as well as the other 4 I'm looking at
I recommend you to buy wooden cases for your GS7. Its look contemporary, stylish and would provide the best protection to your Smartphone.
jhonwright56 said:
I recommend you to buy wooden cases for your GS7. Its look contemporary, stylish and would provide the best protection to your Smartphone.
Click to expand...
Click to collapse
if you read my post. A wooden case is essentially the exact opposite of what I'm looking for. I do like how the reclaimed wood cases look, but I want my phone to look as stock as possible. A wooden case would make it look COMPLETELY different
think I found my winner:
http://www.ebay.com/itm/For-Samsung...acb1220&pid=100033&rk=4&rkt=4&sd=301905544453
low profile clear case to show off the phone perfectly while providing protection without any added bulk AND a matching gold platinum 3D edge-to-edge tempered glass screen protector. And since they come as a packqge, I don't need to worry about fitment issues. For only $14.99 shipped from CA, so I won't have to wait a month to receive it. And I've only heard good things about Nillkin brand cases, it's not even a no-brand as I was expecting to get. At $14.99, that's what I was expecting to pay for the case alone, and another $20-20 for the tempered glass screen protector. So not only did I fit all the criteria I had, it's a name-brand case, AND includes a tempered glass screen protector that I was most definitely going to add, I don't need to worry about the 2 fitting together, and it only comes from CA so I'll get it quick. I plan to read some seller reviews and wait about an hour and then pull the trigger and order it
ETA: after looking at the seller's feedback...
A) they have an obscene amount of positive feedback in general at over 200K. And only sell phone accessories. That's unbelievable
B) the feedback I was able to find for this specific package was all positive
so i'm VERY confident in the seller. And quite confident in the actual product based on the specific reviews too. I look forward to receving this product much more now
I think that best combination for Galaxy S7 is Ringke Slim case with icroo fullscreen protection. which I have, and it looks awesome!
https://www.youtube.com/watch?v=8dNkMydF-pM
As an update. Since I made this thread, I contacted ARTech 21, and they're sending me some cases to review as well. I particularly like the Vivid and Jelly models:
the jelly really fits what I was looking for in this thread. A low profile case that shows off the phone, not the case, while still giving good protection. And the vivid is just a really cool looking totally different style case. I'm really excited to play with em and will have reviews of all of them, including how the screen protector fits with all the different cases, which I'm very curious about
I got #1 and didn't like it at all. Sent back to Amazon. Mic and noise canceling mic holes off and it doesn't have a good grip...
new to S7 as well, day #3 today
I bought Lifeproof Fre case with my S7 http://www.lifeproof.com/en-us/galaxy-s7/fre-for-galaxy-s7/lpfr-sam-gs7.html as i couldn't be bothered with separate shopping research for a screen protector and then a case
Liking it so far
Don't buy number 2. It's too tight on the phone and you can't use the power or volume buttons.
Sent from my SAMSUNG-SM-G930A using XDA-Developers mobile app
Between the UAG and a similar Spigen tough case, which would be a better/slimmer choice?
https://urbanarmorgear.com/collecti...oducts/case-for-galaxy-s7?variant=14392744836
http://www.spigen.com/collections/g...axy-s7-case-tough-armor-1?variant=12163553089
BG music
Which elevator did you record the background music at?
flax said:
I think that best combination for Galaxy S7 is Ringke Slim case with icroo fullscreen protection. which I have, and it looks awesome!
https://www.youtube.com/watch?v=8dNkMydF-pM
Click to expand...
Click to collapse