Code:
[CENTER]#include
/*
* Your warranty is now void. Ups we are using the oneplus one lets give a **** on this :)
*
* I am not responsible for bricked devices, dead SD cards, dead cats,
* thermonuclear war, or you getting fired because the alarm app failed.
* YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will break it! :P
* Act accordingly
*/
[/CENTER]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am 18 years old and this is my second kernel project on second smartphone.
This is a kernel based on the official cm 12.1 nightly kernel with some improvements. I wanted to create a kernel that is basically running with cm stock settings but with some more modifications and more settings to play with. One of the most important points is stability. The kernel is very stable if you are running stock settings but if you are undervolting or using different settings i cant guarantee such a stability. Also a very important point is performance. I am trying to include things that are improving overall performance e.g. custom toolchain, various patches etc. Also an important point is battery life. I try to increase it by adding an intelligent custom hotplug like mako hotplug or msm hotplug. To increase battery life i suggest to underclock your cpu and gpu. Also a different governor like conservative can increase it. Stock settings are nearly the same like cm is using. Pretty balanced with decent battery life.
Features:
- compiled with UBERTC
- O3 optimized (LINK for more infos)
- Special build flags for faster performance
- kexec hardboot => multirom support
- fsync on/off
- f2fs support (always latest upstream updates synced with jaegeuk)
- NEON tweaks
- performance tweaks
- many things from franco kernel
- Charge Level Interface
- power efficient workqueue
- slightly undervolted some components
- tweaks for better battery life
- No Overclock because it isn't necessary and can damage our phone
- Color kontrol (APP to control it)
Hotplug:
- cpuquiet
I/O-Schedulers:
- noop
- deadline
- row
- cfq
- test iosched
- sio
- fiops
- sioplus
- bfq (default)
- tripndroid
- zen
- vr
Governors CPU (tuned)
- smartmax
- conservative
- interactive
- performance
Governors GPU
- cache hwmon
- cpubw hwmon
- msm adreno tz
- cpufreq
- userspace
- powersave
- performance
- simple ondemand
and much more.......
for more information check my source code
Source code
This kernel is more like a beta kernel i dont test them. You are my testers.
Every kernel is a nightly.
Credits:
Jean a good friend of mine for the great logo
franciscofranco
ak
stratosk
Lord Boeffla
savoca
Cl3kener
pawtip
neobuddy89
myfluxi
kecinzer
KINGbabasula
tiny4579
Christopher83
DerTeufel1980
Faux123
the_didge (thx for the server)
To control all features of the kernel pls flash synapse and ukm. Search in xda for the UKM thread and you will find ukm flashable zip file.
Synapse link https://play.google.com/store/apps/details?id=com.af.synapse&hl=de
Installation procedure
- go to recovery
- dirty flash your rom if you are running a custom kernel
- flash Tyr KERNEL
- reboot
- finish
You like my work?
Feel free to donate: Donate-Link
UKM don't forget to Download Synapse
Kernel
old Download page
https://www.androidfilehost.com/?w=files&flid=29777
How to use f2fs?
Just flash my kernel over your current f2fs configuration.
Help Synapse shows UCI not supported?
Flash UKM file from Synapse + UKM thread.
Random reboot freeze. Help?
I am not a real developer i am only a contributor. I can't fix all bugs. Post last kmsg and i can try to find out what the error could be. Be sure that only 1 hotplug is enabled. Most stable settings are stock settings.
Benchmark scores are low help?
I dont care about benchmarks. But for better benchmark scores use performance governor.
Something is draining my battery help?
Not kernel related. The kernel sleeps like a baby. Check with a wakelock detector or better battery stats for wakelocks. Disable data connection if your reception is bad.
I have a feature request. Can you please add feature x?
Yeah. Maybe. Link me to the thread or the source. This is much easier for me.
Kernel does not boot on rom x?
Sry i cant support every rom. My kernel is based on cyanogenmod source code. I can only guarantee that it works on cm nightlys.
Great to see you share this with the community!
Added to index thread on 30/08:
[INDEX] OnePlus One Resources Compilation Roll-Up
Transmitted via Bacon
Good job @DerRomtester!
Compatible with CM11?
MasterThiefGarrett said:
Compatible with CM11?
Click to expand...
Click to collapse
Nightlies, yes.
CM11S, no.
runs great, no issues. thanks
RIPng said:
Nightlies, yes.
CM11S, no.
Click to expand...
Click to collapse
Hmmm I'm on AK now... gimme a reason to try this please
RIPng said:
Nightlies, yes.
CM11S, no.
Click to expand...
Click to collapse
Am I blind because I'm not seeing that in the OP.
Sent from my A0001 using Tapatalk
MasterThiefGarrett said:
Hmmm I'm on AK now... gimme a reason to try this please
Click to expand...
Click to collapse
The correct approach would be "I'm going to try this kernel, see if there are any reasons for me to use it and share my opinion in the kernel thread after."
abc123pro said:
Am I blind because I'm not seeing that in the OP.
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
The thread title says
RIPng said:
The thread title says
Click to expand...
Click to collapse
LOL oh man... [emoji1]
Sent from my A0001 using Tapatalk
@DerRomtester Can you please build a version of this for CM11S?
Or if you have time explain me how can I compile a stock version of franco's kernel with F2FS support?
I just tried f2fs with this kernel and I couldn't get it to boot..?? I did modify the proper files, I tried flashing over a working f2fs rom, tried modifying the boot.img as instructed in the f2fs thread and also tried just using this as the boot.img for the rom, and it just stays on the 1+ logo..
Any suggestions?
Setting.Out said:
I just tried f2fs with this kernel and I couldn't get it to boot..?? I did modify the proper files, I tried flashing over a working f2fs rom, tried modifying the boot.img as instructed in the f2fs thread and also tried just using this as the boot.img for the rom, and it just stays on the 1+ logo..
Any suggestions?
Click to expand...
Click to collapse
It is a bit different because i dont use anykernel ramdisk. What version do you need ? F2fs for cache system and data ?
Sent from my A0001 using XDA Free mobile app
DerRomtester said:
It is a bit different because i dont use anykernel ramdisk. What version do you need ? F2fs for cache system and data ?
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
My whole system is formatted f2fs, so I believe so...
Thanks
Sent from my One A0001 using XDA Premium 4 mobile app
Setting.Out said:
My whole system is formatted f2fs, so I believe so...
Thanks
Sent from my One A0001 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Are you at the moment in f2fs ? If yes you have to extract fstab.bacon from my kernel and than edit it and repack it into boot.img and flash in your current f2fs rom thats it. If you dont get it working i will realease an f2fs all kernel.
Sent from my A0001 using XDA Free mobile app
DerRomtester said:
Are you at the moment in f2fs ? If yes you have to extract fstab.bacon from my kernel and than edit it and repack it into boot.img and flash in your current f2fs rom thats it. If you dont get it working i will realease an f2fs all kernel.
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
I've tried modifying the fstab.bacon as per the f2fs thread instructions, with no luck..
Sent from my One A0001 using XDA Premium 4 mobile app
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NEWEST VERSION: (11 July 2014) S5 AEL Kernel v2
Changelog:
1. CPU Overclock up to 2.88ghz (CREDITS: Faux123)
2. Intelli_plug with eco mode (CREDITS: Faux123)
3. Powersuspend v1.5 (CREDITS: Faux123 and Yank555.lu)
4. Updated intellidemand governor to v5 (CREDITS: Faux123)
5. Added faux's simple gpu algorithm for more control of gpu (CREDITS: Faux123)
6. ktonnsez's Fast Charge
7. Asynchronous Fsync (CREDITS: Faux123)
8. Sweep2Sleep
- Its actually [email protected] as well but thats not functional..
I adapted it from my Note 3 AEL Kernel. You need to go to sys/android_touch and manually
enable it from there (2 files turn the 0 into 1). And then at the bottom of your screen sweep
from right to left and it should lock the screen
(It can also be enabled in trickster mod app)
I try to show it in this screenshot..
9 Enabled NTFS and KSM
Click to expand...
Click to collapse
LINK TAKEN DOWN! PLEASE DONT FLASH IT YET!! IT WILL CAUSE A BOOTLOOP!!
- Made from KSM-G900F_KK_Opensource_Update1
- Enabled Faux Sound Control (CREDITS: faux123,)
- Enabled CPU Voltge Control (CREDITS: GuneetAtwa
- - Added LCD screen on/off hooks (CREDITS: Yank555.lu and Faux123
- Enabled Fast Charge (ALL THANKS and CREDITS to the one and only faux123 !!!
faux's initial commit for fast charge for S5)
- Enabled the following additional CPU Governors: (Use "No Frills Cpu Control" or "TricksterMod" App)
. intelliactive
. lionheart
. intellidemand
. smartmax
. abyysplugv2
. ondemandplus
. dancedance
- Enabled the following additional I/O Schedulers: (Use "No Frills Cpu Control" or "TricksterMod" App)
. Simple (sio)
. zen
. vr
. fiops
. fifo
- Permissive, with init.d support
Click to expand...
Click to collapse
NOTE: This kernel is designed for the G900F Variant!! Users on The G900T and G900I variants have reported no problems with using the AEL kernel; however, do it at your own disgression!!
DOWNLOAD LINK:
(08/05/2014) AEL Kernel v1.2
Changelog:
- Enabled Faux Sound Control (CREDITS: faux123,
commit: https://github.com/faux123/Galaxy_S5/commit/6e8a4612fab11935dcd141f728c85553956476e3)
- Enabled CPU Voltge Control (CREDITS: GuneetAtwa
commit: https://github.com/GuneetAtwal/Blaze.Kernel-S5/commit/d619fafa9e7fe3c50ca6623c8507c38e9ab44bd6)
- Added LCD screen on/off hooks (CREDITS: Yank555.lu and Faux123,
commit: https://github.com/faux123/Galaxy_S5/commit/02fb39dd54b26b60a182be0fd8cdc687fed1e83a)
- Added 3 more Governors:
Inteliactive (CREDITS: faux123)
AbyssPlugv2
OndemandPlus
PLEASE SUPPORT THE GREAT @faux123 by purchasing one of his Play Store Kernel Control Apps. especially for this kernel, faux Sound control app is a necessity!! :good::good:
Click to expand...
Click to collapse
(04/05/2014) AEL Kernel v1.1
Changelog:
- Enabled Fast Charge (ALL THANKS and CREDITS to the one and only faux123 !!!
faux's initial commit for fast charge for S5)
Click to expand...
Click to collapse
(13/04/2014) AEL Kernel v1
Changelog:
- Initial Release
Click to expand...
Click to collapse
SOURCES:
https://github.com/friedrich420/S5-AEL-Kernel
CREDITS and THANKS
- ALL the Kernel DEVELOPERS!!!
- My AMAZING TEAM!!
- XDA!!
Click to expand...
Click to collapse
[/CENTER]
XDA:DevDB Information
AEL Kernel, Kernel for the Samsung Galaxy S 5
Contributors
friedrich420
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 2
Stable Release Date: 2014-07-11
Created 2014-04-19
Last Updated 2014-07-11
I think just one...
Great. At last a custom kernel
Sent from my SM-G900F using Tapatalk
What does this kernel better than the original one?
Gesendet von meinem SM-G900F mit Tapatalk
Read op. Unlocked cpu governors and schedulers
Sent from my SM-G900F using Tapatalk
Can't get init.d support working
Sent from my SM-G900T using XDA Premium 4 mobile app
jpeps said:
Can't get init.d support working
Sent from my SM-G900T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Did you edit the sysinit and install-recovery files? It supports init.d you still have to enable it.
@friedrich420:
Could you please make a kernel for G900H(Exynos) variant?
If possible try to add boeffla or faux audio driver.
I have already boosted the audio but I want more.
Thank you!
SandeepEmekar said:
@friedrich420:
Could you please make a kernel for G900H(Exynos) variant?
If possible try to add boeffla or faux audio driver.
I have already boosted the audio but I want more.
Thank you!
Click to expand...
Click to collapse
Ill give it a shot my man..
About other features, ill add as we go... I wanna keep it like this for a while to maintain its stability and smoothness as much as possible... Sometimes less is more with kernels
I have a request from the people who flashed it... Screenshots with battery stats
Thank you very much for making the first kernel to allow SElinux permissive support. Would have been a rather boring car journey yesterday without this!
@friedrich420
Great kernel, will test it and report back.
As suggestion, double tap to wake would be nice on this phone
Looking forward to lots of improvements!
v3rtex said:
@friedrich420
Great kernel, will test it and report back.
As suggestion, double tap to wake would be nice on this phone
Looking forward to lots of improvements!
Click to expand...
Click to collapse
Dt2w would be alot of work, should port the corresponding files from LG kernel sources to Samsung's to implement it. But, that'll be a good addition.
brees75 said:
Did you edit the sysinit and install-recovery files? It supports init.d you still have to enable it.
Click to expand...
Click to collapse
Did you edit the sysinit and install-recovery files? How do I do this thanks
Sent from my SM-G900T using XDA Premium 4 mobile app
Gnome said:
Dt2w would be alot of work, should port the corresponding files from LG kernel sources to Samsung's to implement it. But, that'll be a good addition.
Click to expand...
Click to collapse
Why LG Kernel?
In the HTC One M7 section, n3ocort3x and tbalden developed this feature doubletap2wake like flick2wake and pick2wake for themselves.
This happened before any manufacturer implemtented this as feature in stock kernel versions.
Of course it takes some work, but everyone can look into their source on github.
v3rtex said:
Why LG Kernel?
In the HTC One M7 section, n3ocort3x and tbalden developed this feature doubletap2wake like flick2wake and pick2wake for themselves.
This happened before any manufacturer implemtented this as feature in stock kernel versions.
Of course it takes some work, but everyone can look into their source on github.
Click to expand...
Click to collapse
Yeah I know, alot have it already, I even have it too: Link for my Mako, what I'm trying to say is, some devices have their own touch drivers in drivers/input. Every device differs from that, so It'll take time to implement it, I might take a look into it once I have my S5, but as I said it'll take time.
@friedrich420 Sorry for the OT, lets move a long now...
Any 900T users with any feedback? I'll flash tomorrow!
Sent from my SM-G900T using Tapatalk
HI
anyway to get kernel that we can flash via odin?
tia
kedai said:
HI
anyway to get kernel that we can flash via odin?
tia
Click to expand...
Click to collapse
No! Via recovery!!!
Sent from my SM-G900F using Tapatalk
also interested to know if any 900t users have tried this...
downloaded a rom from this g900f section and it claims to have no issues being flashed onto the g900t. i dont remember the note 3 being this cross compatible... good thing if you ask me.
Trev420 said:
also interested to know if any 900t users have tried this...
downloaded a rom from this g900f section and it claims to have no issues being flashed onto the g900t. i dont remember the note 3 being this cross compatible... good thing if you ask me.
Click to expand...
Click to collapse
AEL kernel works fine on M900T
Sent from my SM-G900T
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
*/
Users mostly search for Download Link so made a simple one
Key Features
SELinux enforcing, with init.d support
init.d support + other ramdisk tweaks
-O3 , Cortex A15 , Graphite , neon , vfpv4 Optimizations
Compiled from Latest SaberMOD GCC 4.10 Toolchain which is latest Toolchain with best optimizations
Suuport for intelliplug 2.6 hotplug driver
[*]Support for Auto_hotlug driver (Removed v7 ownwards)
Faux Sound Support
USB Fastcharge support
LCD Color Control
Support undervolt/overvolting via sysfs interface/apps interface @myfluxi
Adaptive Voltage Scaling Support
More CPU Governors ( intelliactive , performance , conservative(updated) , powersave , Wheatley , ondemand , ondemandplus , abyssplug , abyssplugv2 , userspace , interactive , smartassH3 , Lionheart )
More I/O Schdedulers ( SIO , Deadline , CFQ , ROW , BFQ(v6) , FIOPS , No-op , V(R) , ZEN )
More GPU Governors (simple , performance , ondemand , powersave , userspace , msm_adreno_tz )
added new power management mode "PowerSuspend" (Hello Battery)
add official f2fs kernel support + f2s optimization
exFAT AIO Optimization
Improved vibration scheduling
Power efficient workques
added LZ4 compression (faster than LZO)
Frandom -Fast Kernel Number Generator driver added
Support for CPU BOOST code.
[*]File systems support: Ext2/3/4, FAT32, NTFS, CIFS, USB OTG , exFAT
Debugging is OFF by Default to save CPU cycles, and extend battery life.
UKSM for Page Merging
Added cdrom option to UMS-lun-devices (Now you can mount internal memory as CD-ROM)
Enabled 5 new TCP Congestion controls viz. ( Westwood, Veno,Vegas , BIC, Reno, HTCP )
Click to expand...
Click to collapse
Changelog:https://dl.dropboxusercontent.com/u/117413382/S5/changelog.txt
Click to expand...
Click to collapse
Downloads:
(XDA-Devdb):http://bit.ly/1uRUAFJ
(Mirror to Dev-Host: http://d-h.st/SpT
Click to expand...
Click to collapse
Installation:
Place the zip in the SDCard
and Flash it in recovery
Click to expand...
Click to collapse
Sources:
https://github.com/GuneetAtwal/kernel_g900f
Click to expand...
Click to collapse
F.A.Q. - Read this before complaining!
1. This kernel works on Y or X rom?
A: It is only compatible with Touchwiz ROMs and i officially support Aliance , Omega , Echoe , XtrestoLite ROM only and users on other ROM are on their own risk and complaining about the Kernel will not be tolerated..!
2. OMG Battery Sucks...!
A: As you can imagine I don't build kernels to decrease battery life. All the battery life problems come from your apps, either Facebook, or Maps, or some Location Service being enabled etc etc. Check your damn wakelocks and fix them, the kernel is not responsible for them.
3. How do I flash this?
A: Reading the OP, theres a reason why I added instructions on it.
4. Which App is the best for Controlling the Kernel?
A: Their are many apps in the Play Store but i personally recommend TricksterMOD or FauxClock rest its on you whether which you find most comfortable.
5. Getting Random reboots..! Any Help
A: I don't answer to problems without a log. The log file is in /proc/last_kmsg. Paste it on pastie.org and link it on your post. Logcats are useless for Kernel purposes, don't bother posting them.
6. OP is arrogant, I'm gonna call the Internet Police?
A: Deal with it.
7. Which Settings are best for XYZ ROM and XYZ thing..!
A: THe Default settings of the Kernel are the best and Balanced one but you can ask other users on the thread or can discuss which settings are the best..!
8. XYZ Feature doen't work in this Kernel on XYZ ROM..! You suckass, fix it..!
A: I don't know who you are. I don't know what you want. If you are looking for a fix, I can tell you I don't have the solution. If you leave now, that'll be the end of it. I will not look for you, I will not pursue you. But if you don't, I will look for you, I will find you, and I ignore you.
9. My Kernel settings are not sticking and i have tried almost all the fu**in apps and none works..!
A: Have you installed busybox ? No? Then kindly install it and not every busybox installation is 100% complete so kindly keep that in mind before posting and beating a dead horse in the thread...!
Click to expand...
Click to collapse
Credits:
-faux123
-schalkerjung1984 for testing everything
-every other dev whose code i incorporated in my kernel
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Note: Feel free to post anything even if it is OT i love to see Geekt Talks , Benchmarks , Discussion going over my Thread
I currently don't own this device so i can't answer all the device Specific Questions so you users help each other and make things easy for all of us.
Lets make a better community here on this Thread
Cheers..!
XDA:DevDB Information
Blaze Kernel for 8974pro chips, Kernel for the Samsung Galaxy S 5
Contributors
GuneetAtwal,
Source Code: https://github.com/GuneetAtwal/kernel_g900f
Kernel Special Features:
Version Information
Status: Stable
Created 2014-05-04
Last Updated 2016-07-22
..
Controllers
You can use Trickster MOD app to control all the functions of the kernel
you can download it here http://bit.ly/1lcuFGO
Click to expand...
Click to collapse
Some info on Governors and I/O Schedulers
http://forum.xda-developers.com/galaxy-s2/general/ref-kernel-governors-modules-o-t1369817
Reserved
Great another kernel with audio tweaks
Sent from my SM-G900F using Tapatalk
---------- Post added at 06:16 PM ---------- Previous post was at 06:15 PM ----------
Does it work with synapse, stweaks or faux kernel manager?
Sent from my SM-G900F using Tapatalk
skivnit said:
Great another kernel with audio tweaks
Sent from my SM-G900F using Tapatalk
---------- Post added at 06:16 PM ---------- Previous post was at 06:15 PM ----------
Does it work with synapse, stweaks or faux kernel manager?
Sent from my SM-G900F using Tapatalk
Click to expand...
Click to collapse
forgot to subscribe to my own thread LOL btw test eveything till i update the thread with more info
Yes it will work with all the above apps but to confirm try yourself
Gonna root right now I'll let you know
Sent from my SM-G900F using Tapatalk
Trickster doesn't allow audio config right?
Sent from my SM-G900F using XDA Free mobile app
only in Donation Version
Gesendet von meinem SM-G900F mit Tapatalk
Kernel is running good on the t mobile s5 (900T) with echo rom. Will keep on testing so far it's been nice and smooth
working great!
great work! How did you put the to boot? In my Boots always in download mode.
Gesendet von meinem SM-G900F mit Tapatalk
thehacker911 said:
great work! How did you put the to boot? In my Boots always in download mode.
Gesendet von meinem SM-G900F mit Tapatalk
Click to expand...
Click to collapse
Boots are made for walking
Just reboot into recovery, you need to have a custom one installed. Instead pressing vol-down button (which takes you to download mode), press vol-up one.
I've had the same problem building a custom kernel. What made the difference is how we pack the kernel. @Friedrich showed me android image kitchen.
All well now
Sent from my SM-G900F using XDA Free mobile app
kedai said:
I've had the same problem building a custom kernel. What made the difference is how we pack the kernel. @Friedrich showed me android image kitchen.
All well now
Sent from my SM-G900F using XDA Free mobile app
Click to expand...
Click to collapse
Can you elaborate on that more please? And possibly what changes you made. Thanks!
Ok Guys can anyone test this zip ?
@tvhak @schalkerjung1984
Changelog:
Linux 3.4.10
LCD Calibration Control
Deepsleep is now more deeper and Touch Digitizer sleeps faster
Click to expand...
Click to collapse
Link: http://d-h.st/ou4
Click to expand...
Click to collapse
done
here is a Benchmark of upstrram Kernel
Gesendet von meinem SM-G900F mit Tapatalk
jrubenc said:
Boots are made for walking
Just reboot into recovery, you need to have a custom one installed. Instead pressing vol-down button (which takes you to download mode), press vol-up one.
Click to expand...
Click to collapse
How the kernel flashe I know just boot my kernel in the download mode.
I use this script for repack https://github.com/HRTGroup/Hacker_Kernel_SM-G900F/blob/master/build_kernel.sh
Gesendet von meinem SM-G900F mit Tapatalk
@GuneetAtwal
Is there any chance for G900H Kernel?
SandeepEmekar said:
@GuneetAtwal
Is there any chance for G900H Kernel?
Click to expand...
Click to collapse
i will need to look into the kernel source if there is not much diff. then it will be easy for me to merge my commits into it or else i won't be doing G900H
@schalkerjung1984
Can you test this one ?
Changelog
Sources updated to 3.4.56
Link: http://d-h.st/bcr
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
*/
Users mostly search for Download Link so made a simple one
Key Features
SELinux Permissive, with init.d support
init.d support + other ramdisk tweaks
-O3 , Cortex A15 , Graphite , neon , vfpv4 Optimizations
Compiled from Latest SaberMOD GCC 4.10 Toolchain which is latest Toolchain with best optimizations
Suuport for intelliplug 2.6 hotplug driver @faux123
More GPU Governors ( simple , performance , ondemand , powersave , userspace , msm_adreno_tz )
Faux Sound Support
USB Fastcharge support
[*]OC upto 2.8Ghz (max safe limit)
Support undervolt/overvolting via sysfs interface/apps interface @myfluxi
Adaptive Voltage Scaling Support
More CPU Governors ( intelliactive , performance , conservative(updated) , powersave , Wheatley , ondemand , ondemandplus , abyssplug , abyssplugv2 , userspace , interactive , smartassH3 , Lionheart )
More I/O Schdedulers ( SIO , Deadline , CFQ , ROW , BFQ(v6) , FIOPS , No-op , V(R) , ZEN )
added new power management mode "PowerSuspend" (Hello Battery)
add official f2fs kernel support + f2s optimization
exFAT AIO Optimization
added LZ4 compression (faster than LZO)
Frandom -Fast Kernel Number Generator driver added
Support for CPU BOOST code.
[*]File systems support: Ext2/3/4, FAT32, NTFS, CIFS, USB OTG , exFAT
Debugging is OFF by Default to save CPU cycles, and extend battery life.
UKSM for Page Merging
Added cdrom option to UMS-lun-devices (Now you can mount internal memory as CD-ROM)
Enabled 5 new TCP Congestion controls viz. ( Westwood, Veno,Vegas , BIC, Reno, HTCP )
Click to expand...
Click to collapse
Changelog:
https://dl.dropboxusercontent.com/u/117413382/Note3/changelog.txt
Click to expand...
Click to collapse
Downloads:
(XDA-Devdb):http://bit.ly/UtDQIs
(Mirror to DevHost):http://d-h.st/kLm
Click to expand...
Click to collapse
Installation:
Place the zip in the SDCard
wipe Dalvik Cache
and Flash it in recovery
Click to expand...
Click to collapse
Sources:
https://github.com/GuneetAtwal/kernel_n9005
Click to expand...
Click to collapse
F.A.Q. - Read this before complaining!
1. This kernel works on Y or X rom?
A: It is only compatible with Touchwiz ROMs and i officially support Aliance , Omega , Echoe , XtrestoLite ROM only and users on other ROM are on their own risk and complaining about the Kernel will not be tolerated..!
2. OMG Battery Sucks...!
A: As you can imagine I don't build kernels to decrease battery life. All the battery life problems come from your apps, either Facebook, or Maps, or some Location Service being enabled etc etc. Check your damn wakelocks and fix them, the kernel is not responsible for them.
3. How do I flash this?
A: Reading the OP, theres a reason why I added instructions on it.
4. Which App is the best for Controlling the Kernel?
A: Their are many apps in the Play Store but i personally recommend TricksterMOD or FauxClock rest its on you whether which you find most comfortable.
5. Getting Random reboots..! Any Help
A: I don't answer to problems without a log. The log file is in /proc/last_kmsg. Paste it on pastie.org and link it on your post. Logcats are useless for Kernel purposes, don't bother posting them.
6. OP is arrogant, I'm gonna call the Internet Police?
A: Deal with it.
7. Which Settings are best for XYZ ROM and XYZ thing..!
A: THe Default settings of the Kernel are the best and Balanced one but you can ask other users on the thread or can discuss which settings are the best..!
8. XYZ Feature doen't work in this Kernel on XYZ ROM..! You suckass, fix it..!
A: I don't know who you are. I don't know what you want. If you are looking for a fix, I can tell you I don't have the solution. If you leave now, that'll be the end of it. I will not look for you, I will not pursue you. But if you don't, I will look for you, I will find you, and I ignore you.
Click to expand...
Click to collapse
Credits:
-faux123
-xcxa23 for testing everything
-every other dev whose code i incorporated in my kernel
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Note: Feel free to post anything even if it is OT i love to see Geekt Talks , Benchmarks , Discussion going over my Thread
I currently don't own this device so i can't answer all the device Specific Questions so you users help each other and make things easy for all of us.
Lets make a better community here on this Thread
Cheers..!
XDA:DevDB Information
Blaze Kernel for 8974 chips, Kernel for the Samsung Galaxy Note 3
Contributors
GuneetAtwal
Source Code: https://github.com/GuneetAtwal/kernel_n9005
Kernel Special Features: UC/OC , UV , Performance Patches
Version Information
Status: Beta
Created 2014-05-21
Last Updated 2016-07-22
Reserved
..
Controllers
You can use Trickster MOD app to control all the functions of the kernel
you can download it here http://bit.ly/1lcuFGO
Click to expand...
Click to collapse
Some info on Governors and I/O Schedulers
http://forum.xda-developers.com/galaxy-s2/general/ref-kernel-governors-modules-o-t1369817
Reserved
yes.. finally official release~!! bro, check ur pm ya~! the one here izit the same as the one in the latest pm?
xcxa23 said:
yes.. finally official release~!! bro, check ur pm ya~! the one here izit the same as the one in the latest pm?
Click to expand...
Click to collapse
NO i changed the ramdisk as it was causing WiFi issues
that was fast... lol.. downloading again and testing it soon
booted and wifi problem fix.. on and off speed is as usual, fast
Name of the kernel sounds ferocious and furious :good: out of the blue there're more choices for users now
Smartass governor doesn't work properly, it keeps the cores to max frequency.
Lodix said:
Smartass governor doesn't work properly, it keeps the cores to max frequency.
Click to expand...
Click to collapse
Check F.A.Q. i already said the Best Settings are the default settings as the default settings are the one which are most compatible to one another and does not cause any issues to the device
GuneetAtwal said:
Check F.A.Q. i already said the Best Settings are the default settings as the default settings are the one which are most compatible to one another and does not cause any issues to the device
Click to expand...
Click to collapse
But... this is not the point, if you have in your ''key features'' something it should be correctly implemented no ? If not should be better remove it or try to fix it. Just my opinion.
Lodix said:
But... this is not the point, if you have in your ''key features'' something it should be correctly implemented no ? If not should be better remove it or try to fix it. Just my opinion.
Click to expand...
Click to collapse
Ahh i did'nt meant that i won't fix it all user reviews are welcome in my thread as i work this way only you report i fix ...!
But regarding best settings default are the best i guess i posted that at wrong time :silly:
GuneetAtwal said:
Ahh i did'nt meant that i won't fix it all user reviews are welcome in my thread as i work this way only you report i fix ...!
But regarding best settings default are the best i guess i posted that at wrong time :silly:
Click to expand...
Click to collapse
Ah sorry xD
I got you wrong.
Is there initd support in the kernel
Sent from my SM-N9005 using Tapatalk
The kernel is the new download link؟؟؟
Just sm 9005
xinfinityoO said:
Is there initd support in the kernel
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Yes there is init.d support check the first page i have mentioned all key features
GuneetAtwal said:
Yes there is init.d support check the first page i have mentioned all key features
Click to expand...
Click to collapse
sorry how do you mount the storage using ums (cd rom)
thanks
xinfinityoO said:
sorry how do you mount the storage using ums (cd rom)
thanks
Click to expand...
Click to collapse
You can use this app http://forum.xda-developers.com/showthread.php?t=2196707
Will this kernel work with the Sprint Variant as well?
ReubenRene said:
Will this kernel work with the Sprint Variant as well?
Click to expand...
Click to collapse
you need to try it out yourself bro
Hi, very good kernel I'm on now for several days is I am very satisfied the basic settings to flash the kernel are exellent for my part I do change anything I care.
Just sometimes my screen freezes but I'm not that just the kernel I say more.
Good work ...:good:
RADIOACTIVE KERNEL
for CM13 Based Roms!
Code:
/* *** Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
hi XDA community, i'm here to share with you my little project,i'm a noob just willing to learn all about android world and at this point i'm building from source just using custom toolchains and making few changes like changing optimizations flags,adding or deleting hotplugs and governors ,nothing more till now but i'm enjoying my builds and want to contribute to this community, well let's start.
THIS IS BY NO MEANS COMPLETELY MY WORK,this is 90% @ak kernel source modified to suit my needs
Current Features
General List:
Compiled with gcc7 Sabermod Toolchain
New Synaptic drivers from CM12.1 - per-panel firmware loading
Linux 3.4.111
Latest CM12.1 Bacon patches
Latest Common Branch patches
Latest Linux 3.4.x patches
Universal Kernel Control Support (Integrated into Kernel ZIP)
Synapse Enabled
Anykernel Ramdisk Format (Compatible with all ROMS)
Bricked hotplug driver (Enabled by default)
Intellihotplug hotplug driver
Alucard hotplug driver
Zen decision hotplug driver
Zzmoove native hotplug canbe activated setting disable hotplug to 0 in his tunables
CPU Freqs Table: 268Mhz 2880Mhz
GPU Freqs Table: 200Mhz 587Mhz
CPU Freqs Limiter Drivers
Intellithermal full Control
XZ Kernel Compression
LZ4 Support
ZRAM Support
Option to enable/disable Fsync
Deadline, Row, Cfq, Bfqv7r5, Noop, Fiops, Sio, SioPlus, VR, Zen, Tripndroid
Disabled IO Stats
Smartmax, Interactive, Conservative, Impulse, ZZmoove, Performance,Smartmax_eps,Elementalx,Yankactive,Optimax,Bioshock,Alucard,Dancedance,Darkness,Intellimm,Hyper,Barry Allen,Bluactive,Adaptive,Wave,Wheatley,Lionheart,Pegasusq
Kcal Control: Colors, Saturation, Huge, Contrast and more
Kcal Profiles Supports
Voltage Control
Sound Control
Charge Control
Kexec Hardboot - Multirom
Ntfs Support
Gentle Fair Sleepers (Disabled by default)
CIFS Enabled
NFS v3 & v4.1 Enabled
Optimized RWSEM Algorithm
Auto FS Laptop Mode
Arch Power
Power efficient workqueues
Ksm
custom splash image
[ RADIOACTIVE KERNEL INSTALL ]
Instructions:
* Boot into Recovery
* (Recommended) Make a complete backup of entire rom
* Flash Zip( if you already have a custom kernel is recommended to dirty flash your rom before flash this kernel)
* Reboot
*Install " Synapse " app from Market
CHANGELOG
HERE
DOWNLOADS
HERE
THANKS!!!!
Thanks and Credits to developers
Of course, I had never been able to create all that by my own. So I want to give credits to the really good developers around, that have given me all the inspiration and from which I cherry picked lots of the implemented functionalities:
*LordBoeffla
* ZaneZam
* Yank555
* Hardcore
* Chainfire
* AndreiLux
* Netarchy
* Gokhanmoral
* Simone201
* Mialwe
* Entropy512
* Faux
* Harunjo
*nikhill
* FranciscoFranco
* Ak
* moludo
* Lozo2010
... I just hope I did not forget someone. If so, please let me know and I will add you of course.
Thanks to all of you for your great work
XDA:DevDB Information
Radioactive Reborn Kernel, Kernel for the OnePlus One
Contributors
acuicultor
Source Code: https://github.com/acuicultor/android_kernel_oneplus_msm8974
Kernel Special Features:
Version Information
Status: Stable
Current Beta Version: Reborn_V2.51
Beta Release Date: 2015-12-31
Created 2015-05-27
Last Updated 2016-09-26
Great job
Congrats mate
Nice work mate. Why don't you post it in Development section ?
Love the feature set! Switched to CM12.1 for a quick minute to check it out and had no reboots at all. Sadly, no kernels are available for ColorOS.
lokesh.3440 said:
Nice work mate. Why don't you post it in Development section ?
Click to expand...
Click to collapse
Just a mistake. Moderators please if you consider move this thread to development section. @Darth Thanks
Sent from my Crispy Bacon
Nice!!!
Sent from my 1+1 using Tapatalk
Fantastic kernel, great job!
Enviado desde mi A0001 mediante Tapatalk
acuicultor said:
Just a mistake. Moderators please if you consider move this thread to development section. @Darth Thanks
Sent from my Crispy Bacon
Click to expand...
Click to collapse
Moved. :good:
Added to OnePlus One index thread:
[INDEX] OnePlus One Resources Compilation Roll-Up
acuicultor said:
Just a mistake. Moderators please if you consider move this thread to development section. @Darth Thanks
Sent from my Crispy Bacon
Click to expand...
Click to collapse
Just curious..you said its render built with uber..but isn't the render kernel already built with uber tc?
Or this is first build and you're gonna add features over time?
Sent from my A0001 using XDA Free mobile app
demon507 said:
Just curious..you said its render built with uber..but isn't the render kernel already built with uber tc?
Or this is first build and you're gonna add features over time?
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
Afaik Render builds his kernel with a custom linaro toolchain and yes this is first build and i'm gonna add features.
Sent from my Nuclear bacon
New version up, synced with latest render kernel, added zzmoove governor and compiled with UberTC 5.1
https://www.androidfilehost.com/?fid=24052804347760138
Sent from my Crispy Bacon
Congratulations.
A lot of work on your part.
Who follows her gets it
acuicultor said:
New version up, synced with latest render kernel, added zzmoove governor and compiled with UberTC 5.1
https://www.androidfilehost.com/?fid=24052804347760138
Sent from my Crispy Bacon
Click to expand...
Click to collapse
About to try this on nuclear slim ?
OmegaBlaze said:
About to try this on nuclear slim ?
Click to expand...
Click to collapse
Good combo for sure
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Crispy Bacon
Where can I get version 1.2?
---------- Post added at 03:07 PM ---------- Previous post was at 03:06 PM ----------
acuicultor said:
Good combo for sure
View attachment 3364156
Sent from my Crispy Bacon
Click to expand...
Click to collapse
.....
OmegaBlaze said:
Where can I get version 1.2?
---------- Post added at 03:07 PM ---------- Previous post was at 03:06 PM ----------
.....
Click to expand...
Click to collapse
We are testing it but soon will be available for download on his thread,this week for sure.
Sent from my Crispy Bacon
Really smooth with exodus rom and also great battery life
hassan_1000 said:
Really smooth with exodus rom and also great battery life
Click to expand...
Click to collapse
What config are you using ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Aero Kernel is a kernel for the Nexus 6. I am aiming for stability, smoothness, and slimness, while retaining a few select features I can't do without. I try to keep a stock-like source, and mostly just cherry-pick in features and fixes from the great developers of XDA that I deem necessary over stock. I will be maintaining 3 branches: Stable built by Uber Toolchains, Beta Built by Uber Toolchains, and Stable built by Uber Linaro Toolchains. To find the differences, please do your own research of the two, but the only major difference is the toolchain that the kernel is compiled with, the different versions have all the same features. Some just find one or the other better so I provide you with both options. Special thanks to @The Flash for his upstream source I used and his help. Also thanks to all the other amazing devs from which I cherry-picked from. Note that this is not in any way affiliated with any kernel control app (there is an "Aero Kernel Control", I have no affiliation with it or the respective dev whatsoever.)
Disclaimer:
I am not liable nor responsible for unusable and/or broken devices due to flashing my kernel. You are fully responsible for what you install on your device, including my kernel.
Features:
Upstream with Linux kernel 3.10.104
Built with AnyKernel2
No Force encrypt or dm-verity
Init.d Support
Built with either Uber Toolchain 6.2.1 or Uber Linaro 6.2.1 built from source
Ofast Optimizations
Minor battery and speed tweaks
XZ Compressed for minimal file size
State Notifier mode
Zen-Tune
USB-Fastcharge
Full F2FS Filesystem Support
Vibration Control
Power Suspend
BCL Tweaks
Adreno Idler - GPU idles at 30 mhz
GPU OC/UC to 700/200 mhz
Full CPU voltage control
CPU Governors: All Stock ones, Nightmare, Ironactive, and Darkness
CPU Hotplugs: Customizable MSM-Sleeper Hotplug, MP Decision Removed
I/O Schedulers: All Stock ones, Maple, Zen
TCP Congestion Protocols: Bic, Cubic, Highspeed, Htcp, Hybla, Illinois, Ip, Reno, Scalable, Vegas, Veno, Westwood, Yeah
Downloads:
Uber-Stable | Linaro-Stable
(Also found in Downloads tab of post)
Betas: Go to my AFH page for the betas and and find it yourself, I will announce beta updates via announcements.
Installation:
From another kernel or stock? -
Download kernel zip from above
Reboot to TWRP recovery (only tested with TWRP)
Flash your ROM's boot.img or dirty flash rom
Flash kernel zip
Wipe cache and dalvik
Reboot to system
From a previous Aero Kernel version? -
Download kernel zip from above
Reboot to TWRP recovery (only tested with TWRP)
Flash kernel zip
Wipe cache and dalvik
Reboot to system
Changelog:
Code:
>12/25/16
[LIST]
[*]v1.0 Stable. Initial Release.
[/LIST]
XDA:DevDB Information
Aero Kernel, Kernel for the Nexus 6
Contributors
Root Wizard, The Flash, All the developers of XDA who make code that I use. Thank you and I apologize I cannot list them all
Source Code: https://github.com/RootWizard/AeroKernel
Kernel Special Features: F2FS, Stable, Smooth, Slim
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2016-12-25
Current Beta Version: 1.02
Beta Release Date: 2016-12-30
Created 2016-12-26
Last Updated 2017-01-01
Anouncement: Aero Kernel telegram channel is up, join to receive the earliest update/status news possible. Dont be a stranger! https://telegram.me/joinchat/EWC7ez8Mb2R927XG9b_KsA
bigmarv31 said:
Thanks brother !
Click to expand...
Click to collapse
? You're very welcome
nice to see you again @Root Wizard
more kernels for our beloved shamu
is it permissive or encrypted?
kamilmirza said:
nice to see you again @Root Wizard
more kernels for our beloved shamu
is it permissive or encrypted?
Click to expand...
Click to collapse
Its permissive
I can't find custom screen colours option
is it me only?
plus "Max Online Cores During Suspend" is default at 4
Sent from my Nexus 6 using Tapatalk
kamilmirza said:
I can't find custom screen colours option
is it me only?
plus "Max Online Cores During Suspend" is default at 4
Click to expand...
Click to collapse
Its not implemented yet, i had lots of errors when i put it in . Once i get it working it will first be in a beta, then stable. And msm sleeper defaults at 4 cores during suspend, i can change this but it can easily be changed via kernel auditor mod or any kernel control app.
Get wifi tether error with this kernel...
Thunderbolt69 said:
Get wifi tether error with this kernel...
Click to expand...
Click to collapse
I will have to cherry pick blackbirds wifi tether fix.
Root Wizard said:
I will have to cherry pick blackbirds wifi tether fix.
Click to expand...
Click to collapse
That's cool, this is a really good kernel. Best I've used so far. I've only used my phone for little over 30 minutes, but it has really good stand by time. Also been the only kernel I haven't had any freezes or lockups or any random reboots. Keep up the good work and thanks.
Thunderbolt69 said:
That's cool, this is a really good kernel. Best I've used so far. I've only used my phone for little over 30 minutes, but it has really good stand by time. Also been the only kernel I haven't had any freezes or lockups or any random reboots. Keep up the good work and thanks.
Click to expand...
Click to collapse
Thanks for the good words, and I plan to keep working on this for a while at least. ?
Root Wizard said:
Thanks for the good words, and I plan to keep working on this for a while at least. ?
Click to expand...
Click to collapse
Hopefully it's a good while... The Ironactive cpu governor is good... So far your kernel is the only one that has it for the Nexus 6.
Thunderbolt69 said:
Hopefully it's a good while... The Ironactive cpu governor is good... So far your kernel is the only one that has it for the Nexus 6.
Click to expand...
Click to collapse
Ironactive is just interactive with the upstream CAF patches, which most kernels add anyways because they improve the governor quite a bit. No point to have two governors that do the same thing lol.
The Flash said:
Ironactive is just interactive with the upstream CAF patches, which most kernels add anyways because they improve the governor quite a bit. No point to have two governors that do the same thing lol.
Click to expand...
Click to collapse
Well battery life and smoothness is alot better with Ironactive than Interactive.... So your post is supposed to be funny lol ....
Thunderbolt69 said:
Well battery life and smoothness is alot better with Ironactive than Interactive.... So your post is supposed to be funny lol ....
Click to expand...
Click to collapse
Whatever suits you. Flash is correct, it is essentially interactive, but slightly improved in my opinion. You can look over the C code and decide for your self. I just want to throw out the option of using it.
Looking forward to trying this kernel, but need to wait for the wifi tether fix. Thanks for giving us yet another option for our mighty whale!
Sent from my Nexus 6 using XDA Labs
MrBrady said:
Looking forward to trying this kernel, but need to wait for the wifi tether fix. Thanks for giving us yet another option for our mighty whale!
Click to expand...
Click to collapse
I will release a beta v1.02 by tonight PST. It will contain the fix. Thanks for being patient.
Root Wizard said:
I will release a beta v1.02 by tonight PST. It will contain the fix. Thanks for being patient.
Click to expand...
Click to collapse
Awesome, thanks!
MrBrady said:
Awesome, thanks!
Click to expand...
Click to collapse
Eh I was slightly busier than expected, wont see it until after this weekend, sorry!
What are the best settings for this kernel? I am using the interactive Governor and it is killing my battery.