Hello,
I need help with rooting mu galaxy s3 international version. I managed to root it once also tryed to flash custom rom (I think i tryed flash CyanogenMod's custom rom with android 4.4). It failed and got my device soft bricked. I managed to fix it and now searching for help. I don't have alot of time so I would be really grateful if you could post a link. Also if you know any good android 4.4 custom roms with stock kernel, I would like to know.
Thanks in advance.
Here you are root 3D: http://forum.xda-developers.com/gal...3-07-2012-cf-root-6-4-supersu-cwm5-5-t1695238
After root, make a backup of efs folder and reset counter with triangle away.
I suggest you Imperium 3.0 with boeffla kernel
broken920 said:
Here you are root 3D: http://forum.xda-developers.com/gal...3-07-2012-cf-root-6-4-supersu-cwm5-5-t1695238
After root, make a backup of efs folder and reset counter with triangle away.
I suggest you Imperium 3.0 with boeffla kernel
Click to expand...
Click to collapse
Thanks . I will have a look. Also maybe you know why it failed to install CyanogensMod's rom?
It's possible that you hadn't latest cwm and gave you error for this. Try with latest cwm or another recovery like philz or twrp.
Inviato dal mio GT-I9300 utilizzando Tapatalk
poviliux77 said:
Hello,
I need help with rooting mu galaxy s3 international version. I managed to root it once also tryed to flash custom rom (I think i tryed flash CyanogenMod's custom rom with android 4.4). It failed and got my device soft bricked. I managed to fix it and now searching for help. I don't have alot of time so I would be really grateful if you could post a link. Also if you know any good android 4.4 custom roms with stock kernel, I would like to know.
Thanks in advance.
Click to expand...
Click to collapse
Good Luck to you this time. I'm using ArchiDroid 2.5.3 and it's working great. :good:
Related
Hii!! :laugh:
I hope I am not making an error by posting here, I am a little new to here so be king please :angel:
I just want to install Philz CMW6 on my I9100G so I can install a kitkat custom ROM; I have been facing problems with this, I tried many ROMs ( CM11 unofficial, SuperNexus, SlimRom, OmniROM .. ) but I failed everytime, I realized that my CWM was not suitable. So I started looking for it I found a good thread http://forum.xda-developers.com/showthread.php?t=2201860 after installing the CWM it goes right installing ROMs but got stuck into bootloop.
So, if someone can give me the .tar.md5 file I can flash using Odin or maybe another thing to take care of.
Thank you
PS: I had CM 10.2
Running official stock ROM : JB 4.1.2
thesm said:
Hii!! :laugh:
I hope I am not making an error by posting here, I am a little new to here so be king please :angel:
I just want to install Philz CMW6 on my I9100G so I can install a kitkat custom ROM; I have been facing problems with this, I tried many ROMs ( CM11 unofficial, SuperNexus, SlimRom, OmniROM .. ) but I failed everytime, I realized that my CWM was not suitable. So I started looking for it I found a good thread http://forum.xda-developers.com/showthread.php?t=2201860 after installing the CWM it goes right installing ROMs but got stuck into bootloop.
So, if someone can give me the .tar.md5 file I can flash using Odin or maybe another thing to take care of.
Thank you
PS: I had CM 10.2
Running official stock ROM : JB 4.1.2
Click to expand...
Click to collapse
Try this steps:
1. Use the method in this thread (http://forum.xda-developers.com/showthread.php?t=2365701) to flash JB stock + root. note that it's better to flash the kernel via recovery after it's on your external sd-card or sideload with adb. This way you don't get the triangle warning and no binary count.
2. Download the kitkat compatible CWM from here: (http://downloadandroidrom.com/file/GalaxyS2/recovery/CWM-KitKatCompatible-i9100.zip)
3. Flash the CWM and reboot to recovery (advanced -> reboot recovery)
4. Flash your Kitkat rom (with all the necessary wipes of course )
PureMind0 said:
Try this steps:
1. Use the method in this thread (http://forum.xda-developers.com/showthread.php?t=2365701) to flash JB stock + root. note that it's better to flash the kernel via recovery after it's on your external sd-card or sideload with adb. This way you don't get the triangle warning and no binary count.
2. Download the kitkat compatible CWM from here: (http://downloadandroidrom.com/file/GalaxyS2/recovery/CWM-KitKatCompatible-i9100.zip)
3. Flash the CWM and reboot to recovery (advanced -> reboot recovery)
4. Flash your Kitkat rom (with all the necessary wipes of course )
Click to expand...
Click to collapse
I tried this but I got stuck on boot again, and knowing that the CWM that you gived don't work :/ ( my model is I9100G I think that this is the reason ).
I have read somewhere that maybe the wipe data / factory reset is the source of problem. I am not sure where I am doing wrong
thanks
thesm said:
I tried this but I got stuck on boot again, and knowing that the CWM that you gived don't work :/ ( my model is I9100G I think that this is the reason ).
I have read somewhere that maybe the wipe data / factory reset is the source of problem. I am not sure where I am doing wrong
thanks
Click to expand...
Click to collapse
oh then I've missed the G :\
in that case you should probably try this thread http://forum.xda-developers.com/showthread.php?t=2199288
stock firmwares for i9100G
PureMind0 said:
oh then I've missed the G :\
in that case you should probably try this thread http://forum.xda-developers.com/showthread.php?t=2199288
stock firmwares for i9100G
Click to expand...
Click to collapse
Hi again!
I flashed stock ROM 4.1.3 and my phone's is going good. but I'm having troubles to go back to CM I don't see what the problem is but I think to change the phone, maybe it's enough for it
And I think about buying a tablet, what do you think Nexus 7 or Samsung Tab 3 ?
thesm said:
Hi again!
I flashed stock ROM 4.1.3 and my phone's is going good. but I'm having troubles to go back to CM I don't see what the problem is but I think to change the phone, maybe it's enough for it
And I think about buying a tablet, what do you think Nexus 7 or Samsung Tab 3 ?
Click to expand...
Click to collapse
Ask here
http://forum.xda-developers.com/showthread.php?t=1846277
Sent from my GT-I9100 using Tapatalk 2
Hello,
I bought my SGS3 more than a year ago. It came with 4.0.4 (ICS), I inmediately changed the ROM to have a pure Samsung one (I live in Mexico, so I wanted to get rid of the TELCEL ROM). After some months I changed the ROM to Jelly 4.1.2 and I kept the phone with it.
I always have rooted my phone without any issues, in order to be able to make backups with "titanium backup" app, so everytime I change the ROM....I do first a backup and then I flashed, so I have to be able to root the phone in the next ROM.
I read about the 4.3 release in October 2012, but after a week I read that too many issues were going on.....so I decided to wait.
So finally, I saw XXUGMK6 from "samsung-updates.com" page and I downloaded it.
I researched a little bit about the official ROM and the version XXUGMK7 was released then, so I decided to change it with this version.
Once I flashed the phone with this ROM everything looked fine, so I proceed to "root" it using ChainFire procedure (CF-Auto-root), but I have not been able to do it!!
I already read a lot of threads looking for solutions, I followed the indications..........but it is not rooted.
I got the right Odin Version, the right ZIP for rooting (CF-Auto-Root-m0-m0xx-gti9300.zip)........followed the OP by ChainFire.....but it does not work.
So.....I humbly ask for help, I really do not want to go back on 4.1.2 because not been succesfull in rooting.
Regards,
Guile
Install recovery. Flash supersu.zip in there.
Sent from my GT-I9300 using Tapatalk
hierarchy666 said:
Install recovery. Flash supersu.zip in there.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Thanks!
I already have the "recovery" in place, but where can I get "supersu.zip" file. I've just seen the one in googleplay, not sure if it is in ChainFire page?
Regards,
Guile
Step. 1 Get a good recovery
PhilZ Touch is a CWM Advanced Edition
Step. 2 Backup EFS.
Step. 3 Flash SuperSU
For fully stock prerooted deodexed latest rom.
http://forum.xda-developers.com/showthread.php?t=2601794
Flash that rom if you still got problems with root.
hierarchy666 said:
Supersu cwm flash
http://download.chainfire.eu/supersu
http://forum.xda-developers.com/showthread.php?t=2002953
For recovery i suggest philz and please backup your efs its important.
For fully stock prerooted deodexed latest rom
http://forum.xda-developers.com/showthread.php?t=2601794
Flash that rom if you still got problems with root.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Thank you very much hierarchy666 , it worked flashing the Supersu.zip..........I did it with the recovery I have. Now my phone is rooted and I could recover all my stuff from the backup.
Regards,
Guile
Glad to hear that.
Sent from my GT-I9300 using Tapatalk
hierarchy666 said:
Supersu cwm flash
http://download.chainfire.eu/supersu
http://forum.xda-developers.com/showthread.php?t=2002953
For recovery i suggest philz and please backup your efs its important.
For fully stock prerooted deodexed latest rom
http://forum.xda-developers.com/showthread.php?t=2601794
Flash that rom if you still got problems with root.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
thx dude..your the best
Hello guys,
my name is Raphnika and I am complete new to this.
I've tried to flash my Samsung S3 with a custom ROM like the Pacman one.(KK 4.4 or something like that).
I was not able to install it on my device so I tried the Android Revolution HD ROM and that worked for me fine.
It seems like I am not able to flash any KK ROMs to my S3. I keep getting a Status 7 Error...
I googled it and tried many solutions but none of them worked. It might be to the fact that I am a complete noob to this.
I hope you guys can help me!
lots of greetings,
Raph
Raphnika said:
Hello guys,
my name is Raphnika and I am complete new to this.
I've tried to flash my Samsung S3 with a custom ROM like the Pacman one.(KK 4.4 or something like that).
I was not able to install it on my device so I tried the Android Revolution HD ROM and that worked for me fine.
It seems like I am not able to flash any KK ROMs to my S3. I keep getting a Status 7 Error...
I googled it and tried many solutions but none of them worked. It might be to the fact that I am a complete noob to this.
I hope you guys can help me!
lots of greetings,
Raph
Click to expand...
Click to collapse
u need to upgrade your ClockWorkMod Recovery to the latest one for i9300..(recovery-clockwork-6.0.4.6-i9300.img)
find and copy CWM img file to your phone or sd card in your phone
Download Flashify apk in your phone.and in the recovery menu find this img file and select yes..
with this cwm i installed many roms 4.4.2 ,4.3 ,4.1.2
keenimo said:
u need to upgrade your ClockWorkMod Recovery to the latest one for i9300..(recovery-clockwork-6.0.4.6-i9300.img)
find and copy CWM img file to your phone or sd card in your phone
Download Flashify apk in your phone.and in the recovery menu find this img file and select yes..
with this cwm i installed many roms 4.4.2 ,4.3 ,4.1.2
Click to expand...
Click to collapse
Wow! Thank you so much! Everything works as supposed to!
Thank you very much!
Raphnika said:
Wow! Thank you so much! Everything works as supposed to!
Thank you very much!
Click to expand...
Click to collapse
Yeah, update the latest Cwm
Sent from my GT-I9300 using XDA Premium 4 mobile app
Hello guys!
I really need help.
A GT-I9305 makes strange problems. I can't flash any custom rom. It will never boot. Only with stock Samsung ROM's it works.
Tried to install many custom ROM's for the S3 and it ended with the same. Bootloop and my only help to get it work is with Samsung Kies...
Wiped Cache, factory reset etc... Nothing worked... It annoys me so please help!
Thanks
BurakkuShippu
bad kernel imo
exe98123q said:
bad kernel imo
Click to expand...
Click to collapse
Sadly not.
I tried it with more kernels but nothing worked.
Does Knox has something to do with the bootloop's? (Stock Android 4.4.4 KitKat is working with stock kernel)
you have latest recovery ? older roms working for you ?
Every time the same result with twrp newest, twrp 2.8.7.0, cwm, philz.
Can't flash stock ROMs with Odin.
Sent from my GT-I9506 using XDA-Developers mobile app
Does anybody know how to root and use a rom on this phone?
I unlocked the bootloader but the next steps for flashing are unknown for me.
I want to know which files i need to use or download, like the TWRP , The most stable rom version. and if is there some files to root the device.
Thanks in advance.
Metri_ said:
Does anybody know how to root and use a rom on this phone?
I unlocked the bootloader but the next steps for flashing are unknown for me.
I want to know which files i need to use or download, like the TWRP , The most stable rom version. and if is there some files to root the device.
Thanks in advance.
Click to expand...
Click to collapse
Video for rooting Motorola One Fusion Plus by using TWRP and Magisk
Gill Android said:
Video for rooting Motorola One Fusion Plus by using TWRP and Magisk
Click to expand...
Click to collapse
Amazing ! Thanks , That´s What I was looking for. I will follow those steps, I was stuck in the TWRP logo, it was like a loop and it didn´t continue with its options, I dunno why, but I m going to do it again by flashing with Twrp , .
Currently I´m using the latest Evolution rom but my cellphone is getting slow sometimes so Im gonna use another custom rom and test how it works .
Thanks again !