Have someone encountered any difficulties while setting up the 3G connection on your carrier? Because when I manually set my APN it dose`t do anything. I don`t know why. I`ve tried everything I know of course the carrier says that is my phone`s fault.
Here are the settings that they have emailed me.
[More ...]> [Mobile Networks]> [Name access points].
Press Options and select [New APN].
Fill:
Name: 3G Broadband
APN: broadband
Proxy: empty
Port: empty
Username: empty
Password: do not fill
Ignore the MMS server port.
MCC 226
MNC: 03 or 031
Authentication type: none
APN type: default, suppl
APN protocol: IPv4
Bearer: Unspecified
Save ...
Related
I just got my M8Pro 3G tablet from PiPo with default APN setup for using AT&T.
Name: ATT
APN: broadband
Proxy: Not Set
Port: Not Set
Username: [email protected]
Password: cingular1
Server: Not Set
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: Not Set
APN Type: default,supl,mms
APN protocol - IPv4
APN enable/disable - APN enabled
Bearer – Unspecified
My problem is that it will only connect to the EDGE 2G network, which is way slow. The modem specs for this 3G tablet are as follows:
1. Standard SIM Card Slot
2. HSPA/WCDMA: 2100/900MHz
3. GSM/GPRS/EDGE Quad band: 850/900/1800/1900
4. Download maximum: 7.2Mbit/s
5. Upload maximum: 5.76Mbit/s
In working with AT&T Tech Support we find that the provisioning system can not ID the IMEI number. Therefore, no APN settings from AT&T.
I am thinking that if provisioning could be set up for some other similar tablet we might get this working properly. I have tried several APN setups but nothing will let me get beyond EDGE 2G.
Any help would be greatly appreciated.
I have a Verizon S4 phone that I am trying to use with T-Mobile. MMS works but not until after I have made a phone call. I have to do this every time I restart the phone. 4g and phone calls seem to be working fine without having to do anything to get those going.
I am set to Global Network Mode and have these APN Settings:
APN: fast.t-mobile.com
Proxy: Not set
Port: Not set
Username : Not set
Password: Not set
Server: Not set
MMSC: http: / /mms.msg.eng.t-mobile.com/mms/wapenc
MMS Proxy: Not set
MMS Port: 80
MMC: 310
MNC: 260
Authentication Type: Not set
APN Type: default,mms,supl
APN Protocol: IPv4/IPv6
APN roaming protocol: IPv4
Bearer: Unspecified
Mobile virtual network operator type: None
Does anyone have any ideas on how I can get mms to start working properly without having to remember to make a phone call first after every restart?
Ive looked through MANY different thread and done exactly what they said, but I just cant get it to work. I put the phone in Gsm mode, and then manually search networks, but after 3 seconds it goes away with no results. Or tries to make me use global settings. I made an APN with the settings
Name: T-Mobile US
APN : epc.tmobile.com
Prox: blank
Username: blank
Password: blank
Server: wap.voicestream.com
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Proxy: 216.155.165.50
MMS Port: blank
MCC: 310
MNC: 260
Authentication type: not set
APN Type: default
APN protocol: IPv4
Bearer: unspecified
Am I missing something?
I have the Xperia Z2 on Three UK and I bought it unlocked. 3G works fine but 4G doesn't, even when LTE only is selected and my friends on Three have full 4G signal it shows no service. 4G used to work on O2. My APN settings are correct. Any ideas?
LTE on 3 UK works fine for me, are you 100% sure you have 4G signal in your area with three? Have a check with this tool. Have you checked the "Use only 3G networks" option in mobile network settings?
Also, check your APN settings with my ones what I'll post.
Name: 3
APN: three.co.uk
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: http://mmc.um.three.co.uk:10021/mmsc
MMS proxy: mms.three.co.uk
MMS port: 8799
MCC: 234
MNC: 20
Authentication type: None
APN type: default,supl,mms,a-gps
APN protocol: IPv4
APN roaming protocol: IPv4
APN enable/disable: APN enabled
Bearer: Unspecified
MVNO type: None
MVNO value: Not set
It's working now I think you have to wait a few days after starting a new contract before 4g is activated.
I wanted to post this information in case anyone else runs into the same issue. I have a SM-G900T that was from T-Mobile which was unlocked and has been running on the Telus network. Currently running Android OS 6.0.1 (Marshmellow) using the Area 51 ROM huge thanks to malbert16442 for his work!
The issue is: voice, data and text messaging was working just fine, however I could not receive or send MMS messages. I found that the problem was both the APN list within the ROM as well as Telus's own APN settings did not work.
The solution was to clear the "APN Type" field!
Here's the APN settings I am currently using:
Name: TELUS (name is irrelevant)
APN: sp.telus.com
Proxy server: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: (won't let me post the MMSC value, but its the generic Telus HTTP URL)
Proxy server: 74.49.0.18
Port: 80
MCC:302
MNC: 220
Authentication type: None
APN type: Not set
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
Mobile virtual network operator type: GID
Mobile virtual network operator value: 5455
Will this work/apply to the Cricket Wireless Network? i have the same exact problem, only I AM able to receive MMS, but not send it.