Warning: You are using this software at your own risk. You may be violating your warranty.
I've tested the root routine at my new DG110 and it works fine.
After rooting device pls. start the superuser.apk and enter "yes" to update the .apk
How to root :
Make sure USB debugging is enabled. Go to settings > developer options > enable USB debugging
Install the drivers for your phone
Extract the AUTO ROOT folder from the .rar download
Connect your phone to PC using a USB cable
Run run.bat from the extracted MTK6589 Auto Root folder
Press any key and wait while it roots your phone
After finished, now reboot
Enjoy your rooted phone and verify your root access with root checker !
jsk001 said:
Warning: You are using this software at your own risk. You may be violating your warranty.
I've tested the root routine at my new DG110 and it works fine.
After rooting device pls. start the superuser.apk and enter "yes" to update the .apk
How to root :
Make sure USB debugging is enabled. Go to settings > developer options > enable USB debugging
Install the drivers for your phone
Extract the AUTO ROOT folder from the .rar download
Connect your phone to PC using a USB cable
Run run.bat from the extracted MTK6589 Auto Root folder
Press any key and wait while it roots your phone
After finished, now reboot
Enjoy your rooted phone and verify your root access with root checker !
Click to expand...
Click to collapse
That's true for root?
And for flashing without losing the IMEI? Do I do?
In addition, I must first make the first root or flashing?
didn't work for my dg110, kingoroot.apk worked ok.
anyone know which devices are similar for porting ?
Related
Hello,
as i read the posts and threads AT&T phones have locked unknown sources. So we cant install unknown sourced apps. (as applanet etc.) and updated fw's (1.4.257.19) cant root yet.
so i found something. i mounted my atrix and took downloaded files from applanet/downloads folder.
then i copied to sdk/tools folder.
i re-connected atrix with PHONE PORTAL mode and enabled usb-debugging.
i run command : adb install ndrive.apk
and Successfull !
i controlled my device application runs perfect.
Step by step :
1-Download from applanet (or internet. if you donwload from internet pass through to step 6 )
2- Connect Atrix in Mass Storage mode.
3- Copy downloaded files from SDCARD to SDK/TOOLS (ex : applanet : applanet/downloads)
4- Rename file (app.apk to NAME_OF_APP.apk)
5- Disconnect Atrix
6- Connect Atrix as Phone portal mode with debugging enabled
7- Open command prompt go to sdk/tools folder (EX: cd C:\sdk\tools\)
8- make sure phone connected (adb devices)
9- Run Command => adb install NAME_OF_APP.apk
10- Success !
you can always install apps through adb install, this is widely known, please search before posting. Also there are methods to enable unknown sources so you don't need to install them through adb. Again, search
Aye download any Root utility and it will almost always allow sideloading, as well. aRoot and the oldschool root utility (Super whatever) both do it.
and you can root the update if you prepare first, check the dev section.
one click, visionary, z4 none of them not working for my firmware
benzersizadam said:
one click, visionary, z4 none of them not working for my firmware
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1016060
benzersizadam said:
one click, visionary, z4 none of them not working for my firmware
Click to expand...
Click to collapse
use aroot.
neotekz your offered solution bricked (soft) my device. i will try aroot
Hello could anyone please help me with rooting my zoostorm sl8 mini running ICS. I just don't know which rooting program to use and with one will work. I have search the web now for days and cant find anything.
Please Help!
Thanks:good:
Use the Qemu exploit
This can device can be rooted using DoomLords Xperia script. I have ported the script to linux as well for Ubuntu users,
The original script is here : http://forum.xda-developers.com/showthread.php?t=1601038
I haven't tested the Windows script, but I assume it will work as I haven't changed anything, the Linux script has been fully tested and I have successfully rooted the sl8 mini using it.
For Windows see below:
1) Download the attached zip file and Super1Click zip file ( http://download.cnet.com/SuperOneClick/3000-2094_4-75447027.html ).
2) Unzip the zip files into a new folders (you can use 7-zip for this : http://www.7-zip.org/)
3) Power on the Zoostorm Sl8 Mini and boot it normally.
4) Go into settings, developer options and tick USB debugging
5) Go to settings, security and tick Allow installtion of non-Market Apps
6) Connect the table to the PC with a USB cable.
7) When the new Hardware Found Wizard find the Android device and can't find a driver, select install from speficic location and browse to drivers folder under the folder you just unzipped the Super1click file to.
8) The driver should install from here and will show as an Acer Android device.
9) If Windows complains about the driver not being signed tell it to continue anyway.
10) Reboot the Windows PC if requested by the Hardware installation Wizard.
11) Discconect and replug the USB cable.
12) Open a windows command prompt
13) Navigate to the folder where the unzipped rootsl8mini.zip files are.
14) type runme.bat
15) Read the blurb on the screen and press any key to root your tablet.
16) The Sl8 mini will reboot several times, after it has reboot for the last time your sl8 mini will now be rooted.
For Linux (Ubuntu Precise Pangolin)
1) Install Android SDK, make sure the folder where adb is located is in your shell path variable. See link for Ubuntu instructions (http://www.liberiangeek.net/2012/07...-androidsdk-in-ubuntu-12-04-precise-pangolin/)
2) Download the attached rootsl8mini.zip file and unzip it into a folder.
3) Go into the folder where you unzipped the file and make the runme.bat.sh file executable. (Myhost:$ chmod 777 runme.bat.sh)
4) Power on the Zoostorm Sl8 Mini and boot it normally.
5) Go into settings, developer options and tick USB debugging
6) Go to settings, security and tick Allow installtion of non-Market Apps
7) Connect the tablet to the PC with the USB cable.
8) Execute the runme.bat.sh script (Myhost:$ ./runme.bat.sh)
9) Read the blurb on the screen and press any key to root your tablet.
10) The Sl8 mini will reboot several times, after it has reboot for the last time your sl8 mini will now be rooted.
Enjoy
Thank you, do I go to unzipped file using command prompt?
Thanks
I have tried to root the tablet and it wont install the drivers, it keeps saying that the file is corrupted or missing.
I'am running windows 8 64.
any suggestion's why it is doing this?
Many thanks :good:
I`m a noob to the Zoostorm. Are there any JB / CM10 ports for it?
Are they known as another name elsewhere in this forum?
Can anyone shed any light on this? Fantastic write-up by mikel by the way. Will test as soon as the mother-in-law gets hers for xmas from us!
Superb MIKEL543 i have done it, thank you so much, it took me a bit to figure it out but i managed to do it YAY..lol.
Now the problem is i cant watch and films from google play or flixster as it say that it cant because my Tablet is rooted .
i have tried everything and cant get it to work! :good:
easy way to root : http://zoostormsl8.blogspot.co.uk/2013/02/root-zoostorm-sl8-mini-3310-9506.html
download and update the zip
Bought this tablet as a gift for my father and assumed that connecting it to a usb keyboard would be straightforward (yeap android noob ) . My question is , is that even possible? Is there a custom rom that can be installed, I presume after rooting the device that enables usb host mode?
hello sir,
i have rooted my micromax ninja a 87 by this ;process given below
unlock root says it has rooted my phone and there i have supersu app too in my mobile when i open it it say su binary needs to be updated i click on ok and installation failed
i then installed superuser latest version and tries to update my binary again but it say that gaining root access .... Fail
i then tried SU update fixer but it also shows Gaining root access fail ...
please help i really want to root my phone and make full use of it thanks,
Aditya
1. Download jdk 32bit only from here, Android sdk from here, Unlock root from here, adb_usb.ini from here and A87 drivers from here.
2. Install jdk
3. install Android sdk, after installing open sdk manager form star and select "android sdk platform-tools" and "google usb driver" unselect the rest, click install packages. After installing put the adb_usb.ini file in "C:\Users\(your PC name)\.android"
4. Now on your phone goto settings>applications>development>enable usb debugging and connect usb cable, it should say usb debugging mode and show a little green android icon on the topleft (if not then reinsert cable or re enable usb debugging)
5. Windows will detect the device, let it stabilize then extract A87 drivers to a location say "C:/drivers"
6. Now goto start type "device manger" open device manager, you wil find "android adb interface" right click upgrade drivers and lead it to a location of your extracted drivers, do the same with other devices you get with an exclamation icon. (dont worry if you dont find other devices, its fine)
7. Install Unlock root, open it and click root, it wil ask for the device select micromax A87 and Your done !!!
8. Press Thanks !! Have a nice day !!
Aditya Kaushik said:
hello sir,
i have rooted my micromax ninja a 87 by this ;process given below
unlock root says it has rooted my phone and there i have supersu app too in my mobile when i open it it say su binary needs to be updated i click on ok and installation failed
i then installed superuser latest version and tries to update my binary again but it say that gaining root access .... Fail
i then tried SU update fixer but it also shows Gaining root access fail ...
please help i really want to root my phone and make full use of it thanks,
Aditya
1. Download jdk 32bit only from here, Android sdk from here, Unlock root from here, adb_usb.ini from here and A87 drivers from here.
2. Install jdk
3. install Android sdk, after installing open sdk manager form star and select "android sdk platform-tools" and "google usb driver" unselect the rest, click install packages. After installing put the adb_usb.ini file in "C:\Users\(your PC name)\.android"
4. Now on your phone goto settings>applications>development>enable usb debugging and connect usb cable, it should say usb debugging mode and show a little green android icon on the topleft (if not then reinsert cable or re enable usb debugging)
5. Windows will detect the device, let it stabilize then extract A87 drivers to a location say "C:/drivers"
6. Now goto start type "device manger" open device manager, you wil find "android adb interface" right click upgrade drivers and lead it to a location of your extracted drivers, do the same with other devices you get with an exclamation icon. (dont worry if you dont find other devices, its fine)
7. Install Unlock root, open it and click root, it wil ask for the device select micromax A87 and Your done !!!
8. Press Thanks !! Have a nice day !!
Click to expand...
Click to collapse
Go here for details :
Micromax A87
hello sir,
i have rooted my micromax ninja a 87 by this ;process given below
unlock root says it has rooted my phone and there i have supersu app too in my mobile when i open it it say su binary needs to be updated i click on ok and installation failed
i then installed superuser latest version and tries to update my binary again but it say that gaining root access .... Fail
i then tried SU update fixer but it also shows Gaining root access fail ...
please help i really want to root my phone and make full use of it thanks,
Aditya
Click to expand...
Click to collapse
I too faced the same problem a while ago :crying:, but at last got its solution...
Do this only if you Have CWM(clockworks mod) installed on your device...
If not then goto - http://forum.xda-developers.com/showthread.php?t=1987020
And find it there...
Firstly, Get a rooted custom/stock ROM and save it in your device's sd card,
Then goto ClockWorks Recovery ( First power off your device, then hold volume up and power key untill superfone logo displays to get into recovery menu), (scroll up and down for three times to enable the power button with vol. up and down key)open 'mounts and storage' menu
Then choose 'format/system' . After the completion Goto main menu and choose 'install zip from sd card' -> choose zip -> And install it.
And after completion, Reeboot. DONE, your got a rooted device...!
In most cases an android phone user comes to know about ROOTING and Installing Custom Recovery like CWMR, TWRP and Philz......Popular System on a chip manufacturer(Soc) like Qualcomm has been in the industry since 1985 and has a strong foundation and many of the flagship companies like sam, sony, lg, are using their Soc's. So somewhat developers are very eager to develop for these devices and let the other manufacturer down in their developer community(But not now a days).
So here we present the Ultimate guide for the media tek device owners on how to root and install Clock Work Mod Recovery for their phones.
ROOTING
One of the Best tools for rooting your phone is using FRAMAROOT which was developed by alephzain (Senior Member at XDA)
Just use any one of the exploit, Try the available exploit......IT will not ruin your Phone
After rebooting if you see the SUPER SU APP in your app drawer, you have successfully ROOTED your Phone.
BACKUP YOUR IMEI
First of all take backup of your imei for that you have to install 5iromtoolbox
1)Open the app
2)Press backup IMEI
3)Connect your phone with USB cable and go to your pc
4)Open your sd card through windows explorer or whatever you use
5)Seek the folder /sdcard/5irom/imeibackup/
6)Copy the imeibackup folder to your pc to a folder that you will not by accident format ^_^
7)You are ok...now you can make whatever you like...
To restore your IMEI
1)Take your imeibackup folder from your pc
2)Paste it on your sd card on folder /sdcard/5irom/imeibackup/
3)Open the 5iromtoolbox
4)Press Restore IMEI and restart your phone!!
INSTALLING CUSTOM RECOVERY[IN THIS TUT CLOCK WORK MOD]
Install MTK Drivers for your phone if officially available or else follow the steps bellow.
Installing Drivers for any android phone
First of all download Pdanet+
1) Enable USB Debugging in Settings -> Developer Options (If you dont have Developer Options in your settings tap 7 times the build number inside about phone, Then you will get the Developer Option)
2) Connect your Phone with a Data cable and run the Pdanet setup >> choose others and continue all the way
IF SETUP FAILS
1) Do it another time with other usb options available in your phone like changing to MTP, Camera(PTP), or by turning on the USB Storage, Do it several times it should install the Drivers
IF SETUP SUCCEEDS
1) Untick the ticked check-box and click finish.
Download MTK Droid Root & Tools developed by rua1(Senior Member at XDA)
1) Connect your phone to computer.
2) Run the tool
View attachment 2785013
View attachment 2785014
View attachment 2785015
3) Press Root.... Wait for few Secs
4) Go to Root, backup & Recovery
5) Select "To use boot from phone". and select Recovery and Boot
6) If asked for any permission select yes.
And at last the device will reboot into recovery if you were inside the recovery, you have successfully done your job
This is an expanded version of rua1 review in his site......
For all who whant to ROOT Allview P6Qmax
MTK6592 CPU
2 G RAM
MALI 450 MP4
16 GB STORAGE
1080X1920 400 DPI DISPLAY
this is the way i rooted my phone
1.Make sure USB debugging is enabled. Go to settings > developer options > enable USB debugging
2.Install the PDAnet Drivers
3.Extract the iRoot from the .rar download
4.Connect your phone to PC visa USB
5.Run iRoot from the extracted Root folder
6.Press any key and wait while it roots your phone
7.After finished, now reboot
After you root your phone dont forghet to back up the room whit MTKDroidTools in case you need to reflash it again.
You can find here a tutorial https://www.youtube.com/watch?v=3nvbU6Km8-M
Download link for root tools and driver
https://drive.google.com/folderview?id=0B6lVdW9gjB_uNXdsRUVEV040V0U&usp=sharing
freemanandrei87 said:
For all who whant to ROOT Allview P6Qmax
MTK6592 CPU
2 G RAM
MALI 450 MP4
16 GB STORAGE
1080X1920 400 DPI DISPLAY
this is the way i rooted my phone
1.Make sure USB debugging is enabled. Go to settings > developer options > enable USB debugging
2.Install the PDAnet Drivers
3.Extract the iRoot from the .rar download
4.Connect your phone to PC visa USB
5.Run iRoot from the extracted Root folder
6.Press any key and wait while it roots your phone
7.After finished, now reboot
After you root your phone dont forghet to back up the room whit MTKDroidTools in case you need to reflash it again.
You can find here a tutorial https://www.youtube.com/watch?v=3nvbU6Km8-M
Download link for root tools and driver
https://drive.google.com/folderview?id=0B6lVdW9gjB_uNXdsRUVEV040V0U&usp=sharing
Click to expand...
Click to collapse
Custom Recovery for Alview P6Qmax
https://drive.google.com/file/d/0B6lVdW9gjB_uUmNPZzJldDl2RWc/view?usp=sharing
Flash with MTK uncle Tool or other program from goole play store