Change your Boot logo to Google Boot logo [not boot animation]
Note : No root access required
Step 1 : make backup your rom / boot.img
Step 2 : download Google boot rar file and extract
Step 3 : Flash logo.bin using Sp Flash Tool
Step 4 : Enjoy New Google Boot Logo
Alternate Method
Step 1 : Boot phone into Fastboot Mode
Step 2 : Run CMD and flash file using ADB command
Code:
fastboot flash logo logo.bin
Step 3 : Type Command
Code:
fastboot reboot
Step 4 : Enjoy New Google Boot Logo
Preview 1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Preview 2
Click to expand...
Click to collapse
Preview 3
Click to expand...
Click to collapse
New Google PACman Preview
Click to expand...
Click to collapse
Suggestion are always welcome...............and also Send me image that you want Google Boot logo.
More logos ......................
Cool is thr more boot logo of google???
Is root access required
Sent from my Micromax A120 using XDA Free mobile app
Sachin97 said:
Is root access required
Sent from my Micromax A120 using XDA Free mobile app
Click to expand...
Click to collapse
No.............. no need root permission
but careful when use sp flash tool........ just flash logo.bin
pra7m said:
No.............. no need root permission
but careful when use sp flash tool........ just flash logo.bin
Click to expand...
Click to collapse
Thanks bro
Sent from my Micromax A120 using XDA Free mobile app
Should the bootloader be unlocked...???
Hi, my Canvas A1 is rooted but bootloader isn't unlocked.
Trying to flash the "logo" via "fastboot" gives me the following error:
FAILED (remote: download for partition 'logo' is not allowed)
I haven't used SP tools before. Please provide assistance.
pra7m said:
Change your Boot logo to Google Boot logo [not boot animation]
Note : No root access required
Step 1 : make backup your rom / boot.img
Step 2 : download Google boot rar file and extract
Step 3 : Flash logo.bin using Sp Flash Tool
Step 4 : Enjoy New Google Boot Logo
Alternate Method
Step 1 : Boot phone into Fastboot Mode
Step 2 : Run CMD and flash file using ADB command
Code:
fastboot flash logo logo.bin
Step 3 : Type Command
Code:
fastboot reboot
Step 4 : Enjoy New Google Boot Logo
Preview 1
Preview 2
Preview 3
Preview 4
Suggestion are always welcome...............and also Send me image that you want Google Boot logo.
Click to expand...
Click to collapse
Will this work on my mmx c2c
Sent from my Micromax A120 using XDA Free mobile app
Help me please . I need something like the lg g2/g3 lockscreens. Which are pattern without any thing displayed .
Things I have :
OEM unlocked
Root
Xposed framework
Things I need:
Lock screen
I don't need launcher.
Sent from my Micromax A1 using XDA Free mobile app
:thumbup:
i want to make my logo pic...
how many imgs come in stock logo.bin?? plz help
SwakyD said:
i want to make my logo pic...
how many imgs come in stock logo.bin?? plz help
Click to expand...
Click to collapse
Its 3 png or imgs are there..................
New Google PACman Logo Updated
binojvijayakumar said:
Hi, my Canvas A1 is rooted but bootloader isn't unlocked.
Trying to flash the "logo" via "fastboot" gives me the following error:
FAILED (remote: download for partition 'logo' is not allowed)
I haven't used SP tools before. Please provide assistance.
Click to expand...
Click to collapse
You need to unlock bootloader first if you flashing it with fastboot
Sent from my A1 using XDA Free mobile app
can anyone create google bootlogo without "powered by android" ?
It has been made
I'm using it
Sent from my A1 using XDA Free mobile app
@Keyvannn
Keyvannn said:
can anyone create google bootlogo without "powered by android" ?
Click to expand...
Click to collapse
made by santa
pra7m said:
Change your Boot logo to Google Boot logo [not boot animation]
Note : No root access required
Step 1 : make backup your rom / boot.img
Step 2 : download Google boot rar file and extract
Step 3 : Flash logo.bin using Sp Flash Tool
Step 4 : Enjoy New Google Boot Logo
Alternate Method
Step 1 : Boot phone into Fastboot Mode
Step 2 : Run CMD and flash file using ADB command
Code:
fastboot flash logo logo.bin
Step 3 : Type Command
Code:
fastboot reboot
Step 4 : Enjoy New Google Boot Logo
Preview 1
Preview 2
Preview 3
New Google PACman Preview
Suggestion are always welcome...............and also Send me image that you want Google Boot logo.
Click to expand...
Click to collapse
Thank You Thank You Thank You .... Thank you Sooooooooooooooo MUCH ....!!!!!!!!!!! hah... I searched the entire internet for the original micromax boot logo for canvas A1 and at last I found it... Thank you so much !!!!
Yeah, its work. Do you have the .bin file editor? I want to make own boot logo. Thanks a lot
Thanks.
thanks a lot man.
pra7m said:
Change your Boot logo to Google Boot logo [not boot animation]
Note : No root access required
Step 1 : make backup your rom / boot.img
Step 2 : download Google boot rar file and extract
Step 3 : Flash logo.bin using Sp Flash Tool
Step 4 : Enjoy New Google Boot Logo
Alternate Method
Step 1 : Boot phone into Fastboot Mode
Step 2 : Run CMD and flash file using ADB command
Code:
fastboot flash logo logo.bin
Step 3 : Type Command
Code:
fastboot reboot
Step 4 : Enjoy New Google Boot Logo
Preview 1
Preview 2
Preview 3
New Google PACman Preview
Suggestion are always welcome...............and also Send me image that you want Google Boot logo.
Click to expand...
Click to collapse
Awesome work. Thanx a lot...!
---------- Post added at 06:57 PM ---------- Previous post was at 06:20 PM ----------
pra7m said:
Change your Boot logo to Google Boot logo [not boot animation]
Note : No root access required
Step 1 : make backup your rom / boot.img
Step 2 : download Google boot rar file and extract
Step 3 : Flash logo.bin using Sp Flash Tool
Step 4 : Enjoy New Google Boot Logo
Alternate Method
Step 1 : Boot phone into Fastboot Mode
Step 2 : Run CMD and flash file using ADB command
Code:
fastboot flash logo logo.bin
Step 3 : Type Command
Code:
fastboot reboot
Step 4 : Enjoy New Google Boot Logo
Preview 1
Preview 2
Preview 3
New Google PACman Preview
Suggestion are always welcome...............and also Send me image that you want Google Boot logo.
Click to expand...
Click to collapse
Awesome work bro. A request: Can u change the 2nd logo to
Android
powered by google
or just remove the "powered by" phrase
That would be great
Related
Hello,
Custom Recovery + Root
Wolfpapa said:
this is new: Nubia z9 全球首发中文TWRP recovery 以及root工具 时
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://bbs.nubia.cn/thread-501293-1-1.html
Download: http://pan.baidu.com/s/1ntoX6AX
Click to expand...
Click to collapse
Google Play
Wolfpapa said:
Works! Thanks!
BASIS: http://bbs.nubia.cn/thread-487610-1-1.html
1: ROOT :
http://bbs.nubia.cn/forum.php?mod=viewthread&tid=480787&extra=page=1&filter=typeid&typeid=379
2: Step by step BASIS
3: manually installed pack of gapps called : system\priv-app folder with rwxr-xr-x permissions.
4: Reboot
5: run Play Store (After it sets long to start: new reboot)
6: enjoy! ALL WORKS! (also contacts)
Click to expand...
Click to collapse
Custom ROM from Cuoco92
Cuoco92 said:
Here the 1.38
https://mega.nz/#!O4pHVZgB!Q4bqcygWox9GAZWfhiWviUX34OGnwXPfK7fXq5-RLd4
I've posted it on my Facebook site
https://m.facebook.com/cuoco92
Inviato dal mio NX505J utilizzando Tapatalk
Click to expand...
Click to collapse
Let me know what works for you. Just got mine today and have tried root genius and kingroot..no luck
Akuji52 said:
Hello,
i want to root the ZTE Nubia Z9 but nothing works. I tried Rootgenius, Kingoroot ...
Can someone help ?
Thank you
Click to expand...
Click to collapse
it worked today!
http://bbs.nubia.cn/thread-481008-1-1.html
Download:
http://pan.baidu.com/s/1c0k3O9E Password: mk24
Google apps:
http://www.coolapk.com/apk/org.coolapk.gmsinstaller?from=rss&version=1.0.0-beta4
UPDATE!
http://forum.xda-developers.com/showpost.php?p=61779046&postcount=86
Hi Wolfpapa,
thank you for your info.
I downloaded the files you write.
But now i can not read the chines letters. How did you make it, with the .exe file.
Can you please write it in english or german.
Thank you!
Grisu122122 said:
Hi Wolfpapa,
thank you for your info.
I downloaded the files you write.
But now i can not read the chines letters. How did you make it, with the .exe file.
Can you please write it in english or german.
Click to expand...
Click to collapse
the same as in (can it also work ...) :
http://forum.xda-developers.com/and...-nubia-z9-mini-one-click-root-custom-t3130631
Original " Z9和Z9MAX 是一个ROOT工具 " version:
It may be the exception to the non-English speaking TWRP VERSION...
Here is the solution to English translation:
http://forum.xda-developers.com/showthread.php?t=2373952
Unfortunately, I can test the next week. The phone will be next week delivery
please write about your experiences phone! Google apps ?
Thanks!
New FOTA UPDATE About SD!
Back up your data before moving to a new rom !
http://www.nubia.cn/service.php?sid=5
Download: Password : tira
http://pan.baidu.com/share/link?shareid=3545574096&uk=2436317143 (Jdownloader )
Update PDF manual:
http://pan.baidu.com/s/1c0wGeMc
first Steps!!!: UNROOT !!!
step Two: reading PDF :laugh:
i killed my stock recovery so i cant go to the recovery to update. It shows only a black screen.
Is there a way to flash the stock recovery or a custom recovery ?
I have root.
Thanks
Akuji52 said:
i killed my stock recovery so i cant go to the recovery to update. It shows only a black screen.
Is there a way to flash the stock recovery or a custom recovery ?
I have root.
Thanks
Click to expand...
Click to collapse
post #6 !!! - or.. :
1; download rom post #6
2; Unpacking with WinRAR or 7zip the stock recovery.img
3; fastboot mode ( enable USB Debugging mode )
4; Flashing recovery.img via adb
ok thanks, i will try it , when i am back from holiday
Wolfpapa said:
post #6 !!! - or.. :
1; download rom post #6
2; Unpacking with WinRAR or 7zip the stock recovery.img
3; fastboot mode ( enable USB Debugging mode )
4; Flashing recovery.img via adb
Click to expand...
Click to collapse
don't try this!!!!
i have flash the recovery.img file and now the phone doesn't start!!
i cant only start on boot to choise recovery or normal boot but don't work in all two options!!!
HELP ME!
NMarco said:
don't try this!!!!
i have flash the recovery.img file and now the phone doesn't start!!
i cant only start on boot to choise recovery or normal boot but don't work in all two options!!!
HELP ME!
Click to expand...
Click to collapse
How this happened?It describes the process?
why, how? etc.
I have used recovery.img into the upgrade file.
Flashed via adb and now the phone is hold on boot logo screen.
If I power on pressing vol - button I see screen to choose to boot in recovery or reboot system or power off.
All options doesn't work!
Do you have any ideas?
wow!!! Solved!
- I waited until the battery of my nubia z9 was completely to 0% .
- pressed vol down and connected to usb cable + charger (not pc!)
- wait 10 minutes for charge a little battery
- connect phone to pc and extracted recovery.img of the file zip upgrade
- via adb I have run this command: fastboot -i 0x19d2 flash recovery recovery.img
- selected reboot to recovery
- ALL OK! fortunately!!!
NMarco said:
wow!!! Solved!
- I waited until the battery of my nubia z9 was completely to 0% .
- pressed vol down and connected to usb cable + charger (not pc!)
- wait 10 minutes for charge a little battery
- connect phone to pc and extracted recovery.img of the file zip upgrade
- via adb I have run this command: fastboot -i 0x19d2 flash recovery recovery.img
- selected reboot to recovery
- ALL OK! fortunately!!!
Click to expand...
Click to collapse
cleverly solved! :good::good::good:
any ideas to install gapps without custom recovery?
ok! in this post I reply to me!!
I have manually installed pack of gapps called: gapps-lp-20141109-signed on system\priv-app folder with rwxr-xr-x permissions.
That's all!
All works but actually only contacts aren't not sync and I dont's see in sync page of my account.
How did you actually do it?? It's not clear to me, are you rooted? Otherwise how could you access "system\priv-app" folder?
Thanks...
Yes, device is rooted!
NMarco said:
Yes, device is rooted!
Click to expand...
Click to collapse
And can I ask the exact steps you took?
Thanks again...
---------- Post added at 09:45 PM ---------- Previous post was at 09:28 PM ----------
giacomofisico said:
And can I ask the exact steps you took?
Thanks again...
Click to expand...
Click to collapse
Getting specific, is it the boot.img that you find in the big .zip file that you have to boot up?
Something like:
adb reboot bootloader
fastboot -i 0x19d2 boot boot.img
...and then flash superSU (and possibly gapps)?
Hi All.
Got my device from Hong kong today, Live in Denmark so think i am the first user in Denmark of this device.
Man the screen are great
We are missing an forum for this device here on XDA, hope they create one for us soon, so we can setup guides on how to do this and that.
Ok could we create an process guide in this thread with links for updating, rooting and so on.
I really miss Google stuff on my device, Google Play, sync from google contacts, photos, calender and so on.
First i think i need to Root right?
When its done i need to install Google framework right?
Could soneone that has allready provide us with links, guides or mayby Youtube video on how to do it correct, i would kill myself if i Break the device on the first day.
Thanks peeps
Hey Fellas! ^_^
Today I present you some boot logos for our beloved Redmi Note 3 (Kenzo)
#include<disclaimer.h>
*This mod will only change your boot logo and nothing else
*Unlocked Bootloader Mandatory
*Make sure you move on with your own discretion and follow given procedures
*No Thermonuclear War will take place if u flash this (Its just a Splash Image )
getch();
Anyways, lets move ahead
F.A.Q : Section
1. Which ROMs are supported?? (Noob Question )
A. These Boot Logos are working perfectly fine with all MIUI , CM , AOSP and Layers based ROMs
2. Will it brick my device?
A. Actually not just follow procedures and you are good to go!
3. My Recovery has lost after flashing now what? (Just in Case / Rare Cases)
A. Simple Boot into fastboot and flash recovery
/* END OF FAQs */
Calm :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Apple :
True Lies :
Game Of Thrones :
Rockstar Studios :
Pokemon :
Links??? As of now please refer here : rn3kenzo.blogspot.com
(Can't post outside links for now will post later)
Downloaded Now What???
Follow This!
Make Sure That
#ADB & Fastboot are properly Installed
#Fastboot drivers of Redmi note 3 are installed (else won't be detected in Fastboot mode)
Steps:-
1. Change the name of the downloaded image to "splash" (ALL IN SMALL LETTERS)
2. Place in the your adb and fastboot folder
3. Boot into FASTBOOT Mode by (Vol - & Power Button)
4. Now run the command : fastboot flash splash splash.img
5. Then run the command : fastboot reboot
6. Enjoy
A Big Thanks To :
Splash creator Tool By @GokulNC
Me of course for making these @Kaname-kun
Thanks...it looks awesome...trying it now ???
Edit: Done...this was so easy.
Thanks mate
Sent from my Redmi Note 3 using Tapatalk
For pokémon it's only an amage or it's an animation ?
Also I loved the bootanimations of the first moto G, do you know if it's possible to used them ?
jordandroid64 said:
For pokémon it's only an amage or it's an animation ?
Also I loved the bootanimations of the first moto G, do you know if it's possible to used them ?
Click to expand...
Click to collapse
I've Mentioned that just Boot Logo it's what comes before boot animation and for that Moto G Boot Animation you can get it googled and set it to your device using any boot animation manager app
Kaname-kun said:
Hey Fellas! ^_^
Today I present you some boot logos for our beloved Redmi Note 3 (Kenzo)
#include<disclaimer.h>
*This mod will only change your boot logo and nothing else
*Unlocked Bootloader Mandatory
*Make sure you move on with your own discretion and follow given procedures
*No Thermonuclear War will take place if u flash this (Its just a Splash Image )
getch();
Anyways, lets move ahead
F.A.Q : Section
1. Which ROMs are supported?? (Noob Question )
A. These Boot Logos are working perfectly fine with all MIUI , CM , AOSP and Layers based ROMs
2. Will it brick my device?
A. Actually not just follow procedures and you are good to go!
3. My Recovery has lost after flashing now what? (Just in Case / Rare Cases)
A. Simple Boot into fastboot and flash recovery
/* END OF FAQs */
Calm :
Apple :
True Lies :
Game Of Thrones :
Rockstar Studios :
Pokemon :
Links??? As of now please refer here : rn3kenzo.blogspot.com
(Can't post outside links for now will post later)
Downloaded Now What???
Follow This!
Make Sure That
#ADB & Fastboot are properly Installed
#Fastboot drivers of Redmi note 3 are installed (else won't be detected in Fastboot mode)
Steps:-
1. Change the name of the downloaded image to "splash" (ALL IN SMALL LETTERS)
2. Place in the your adb and fastboot folder
3. Boot into FASTBOOT Mode by (Vol - & Power Button)
4. Now run the command : fastboot flash splash splash.img
5. Then run the command : fastboot reboot
6. Enjoy
A Big Thanks To :
Splash creator Tool By @GokulNC
Me of course for making these @Kaname-kun
Click to expand...
Click to collapse
Thank you for your work, I have a problem that previously had, I enter fasboot mode and fastboot flash splash Pörner splash.img command, tells me waiting for device
I have bootloader open.
Fastboot Driver are not Installed
Note : Make Sure You Have a Internet Connection
---------Steps -----------
1. Connect Device in Fastboot Mode
2. Goto Device Manager
3. Check for the Unknown Android Device
4. Right-Click on it and check for Driver online
5. Let it download and install the driver
6. After it gets completed reconnect your device and flash it'll work
Kaname-kun said:
Fastboot Driver are not Installed
Note : Make Sure You Have a Internet Connection
---------Steps -----------
1. Connect Device in Fastboot Mode
2. Goto Device Manager
3. Check for the Unknown Android Device
4. Right-Click on it and check for Driver online
5. Let it download and install the driver
6. After it gets completed reconnect your device and flash it'll work
Click to expand...
Click to collapse
Thanksaa man :laugh:
Can you make this as Boot animation:
http://img-9gag-fun.9cache.com/photo/aprqnQB_460sv.mp4
how can i create my own boot image screens?
do you any link to tutorials for the same??
Maximaro said:
Can you make this as Boot animation:
http://img-9gag-fun.9cache.com/photo/aprqnQB_460sv.mp4
Click to expand...
Click to collapse
Use after efect software
Sent from my kenzo using XDA Labs
ang3lical said:
Thank you for your work, I have a problem that previously had, I enter fasboot mode and fastboot flash splash Pörner splash.img command, tells me waiting for device
I have bootloader open.
Click to expand...
Click to collapse
fastboot Driver Not Work, Reinstall and then try again
---------- Post added at 05:41 AM ---------- Previous post was at 05:29 AM ----------
bianfi said:
Use after efect software
Sent from my kenzo using XDA Labs
Click to expand...
Click to collapse
it's already a Bootanimation, find any tool that convert a video into boot animation, like Rom toolbox pro,
Kaname-kun said:
Hey Fellas! ^_^
Today I present you some boot logos for our beloved Redmi Note 3 (Kenzo)
#include<disclaimer.h>
*This mod will only change your boot logo and nothing else
*Unlocked Bootloader Mandatory
*Make sure you move on with your own discretion and follow given procedures
*No Thermonuclear War will take place if u flash this (Its just a Splash Image )
getch();
Anyways, lets move ahead
F.A.Q : Section
1. Which ROMs are supported?? (Noob Question )
A. These Boot Logos are working perfectly fine with all MIUI , CM , AOSP and Layers based ROMs
2. Will it brick my device?
A. Actually not just follow procedures and you are good to go!
3. My Recovery has lost after flashing now what? (Just in Case / Rare Cases)
A. Simple Boot into fastboot and flash recovery
/* END OF FAQs */
Calm :
Apple :
True Lies :
Game Of Thrones :
Rockstar Studios :
Pokemon :
Links??? As of now please refer here : rn3kenzo.blogspot.com
(Can't post outside links for now will post later)
Downloaded Now What???
Follow This!
Make Sure That
#ADB & Fastboot are properly Installed
#Fastboot drivers of Redmi note 3 are installed (else won't be detected in Fastboot mode)
Steps:-
1. Change the name of the downloaded image to "splash" (ALL IN SMALL LETTERS)
2. Place in the your adb and fastboot folder
3. Boot into FASTBOOT Mode by (Vol - & Power Button)
4. Now run the command : fastboot flash splash splash.img
5. Then run the command : fastboot reboot
6. Enjoy
A Big Thanks To :
Splash creator Tool By @GokulNC
Me of course for making these @Kaname-kun
Click to expand...
Click to collapse
where is the download link……:silly:
Lol
does those logos work for mtk version of redmi note 3 ?
Nice... try it soon
i want to Google Boot.img for my Redmi Note 3 SD?
Hello guys,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Lenovo K6 Power k33a42 is a new device released by lenovo on Dec 16, as many of you have bought this phone i would like to share how this phone can be rooted and how we can install twrp on this phone
UNLOCKING BOOT-LOADER :
Unlocking your Android phones bootloader is the first step to rooting and flashing custom ROMs
WARNING: UNLOCKING YOUR BOOTLOADER VOIDS YOUR WARRANTY.PROCEED AT YOUR OWN RISK.
NOTE: Unlocking the bootloader will Wipe/ factory reset your device, and will delete all personal data from your device such as apps, photos, messages, and settings.
INSTRUCTIONS:
1) Download the View attachment K33a42_bootloader_unlock.zip and View attachment drivers.zip zip archive attached here
2) On your device, turn on USB debugging and allow OEMunlocking
if there is no developer options in settings - go to the " Settings -> Device Info " and click on the item " Build number " until the display shows that " you became a developer
go back to the device's main Settings menu and go to Developer options tick "OEM unlocking " and " USB debugging'
when you connect for the first time using debugging via USB you will need to confirm the RSA fingerprint key to trust the PC
3) Extract the Unlock bootloader zip to any directory
4) Connect the device (K33a42) to a PC via USB-cable.
5. Go to the extracted directory and execute Unlock_Bootloader.bat and expect to complete the unlock process.
after the process is completed the boot loader will be unlocked.
INSTALLING TWRP :
1) Extract the folder View attachment TWRP.zip archive to any drive.
2)On your phone, turn on USB debugging (drivers for ADB must be installed).
Connect your phone to a PC via usb-cable
3) You have 2 options either you can try the TWRP (only run one time) or else you can replace the stock recovery with twrp
Use accordingly
run Flash-TWRP.bat (replace stock recovery) or
run Run-TWRP.bat (for one time only).
4) Wait for the phone to boot into TWRP.
You can now disconnect the usb-cord.
Installation is finished.
and also at the starting of the twrp recovery the language will be in Russian because the creator in SevenMaxs from lenovo-forums.ru (I'am looking forward to modify default lang to english)
here is the video which shows how to do so
https://www.youtube.com/watch?v=KOhR92EKD7A
* In the stock firmware Secure Boot is enabled by default , so any changes made to the system partiton lead to a bootloop. Therefore, when you first start TWRP set the system mode to Read Only !
So in order to proceed we need to disable the secure booting in the kernel
Now to disable Secure Boot verification in the boot.img
1. Extract boot.img using twrp backup of boot partition
(you can use android image kitchen for extracting)
2. Make changes in the ramdisk \ default.prop file
change the following line:
ro.secure = 1
to
ro.secure = 0
3. repacked boot.img and flash into the device using twrp.
I know this part may be tough for some uses hence voila i have the secure boot disabled boot image , flash this to boot partition using twrp
ROOTING
Flashing SuperSU zip via TWRP Recovery
Download and transfer the View attachment SuperSU-v2.79-201612051815.zip zip file attached here to your device’s storage.
Boot your device into TWRP recovery.
Tap on Install and select the SuperSU zip file that you transferred to your device in Step 1.
After selecting the .zip file, do Swipe to Confirm Flash on the bottom of screen to begin the flashing process.
Once SuperSU is flashed, you’ll get Reboot System option, select it.
Congratulations! Your device should be rooted now. Look for the SuperSU app in app drawer.
INSTALLING XPOSED
1)Install the xposed installer from playstore
2)Open the installer, and tap the ‘Install/Update’ button. Don’t worry if the app seems stuck here; just give it time and it will eventually show you a Superuser request, which you should make sure to grant and click reboot
Almost all the modules should work on stock rom as it is close to Aosp
modules which i can confirm to work are
: Android N-ify
; Gravitybox
: Bootmanager
:fingers-crossed:
All the credit goes to SevenMaxs
for creating the recovery
and for his guides for proper installation
orginal forum thread
please thank him :fingers-crossed::fingers-crossed:
Thank you
Thankzz.
Sent from my CAM-L21 using Tapatalk
When i try to flash SuperSU-v2.79-201612051815.zip, it says that is corrupt. What can i do ?
Plzz, fix it
Sent from my CAM-L21 using Tapatalk
I found another SuperSU, that worked for me: https://www.androidfilehost.com/?fid=385035244224405790
Thank you again ArjunrambZ and SevenMaxs!
LoverOfLife said:
When i try to flash SuperSU-v2.79-201612051815.zip, it says that is corrupt. What can i do ?
Click to expand...
Click to collapse
i will take a look at the zip, may be upload problem, well any super su zip will work,, this was thw one that i tried
Sent from my VIBE K6 Power using XDA Labs
LoverOfLife said:
Thank you
Click to expand...
Click to collapse
taweng7 said:
Thankzz.
Click to expand...
Click to collapse
taweng7 said:
Plzz, fix it
Click to expand...
Click to collapse
will uplpad today
also the secure boot disabled boot img also
:laugh:
Sent from my VIBE K6 Power using XDA Labs
I'll add adb/fastboot instruction for those who don't use Windows:
Of course you have to enable developer options, adb debug, oem unlocking
UNLOCK:
> adb reboot bootloader
> fastboot oem device-info
> fastboot oem unlock-go
(and... yes you can lock it back with fastboot oem lock)
TWRP:
> fastboot flash recovery /path/to/your/twrp.img
> fastboot oem reboot-recovery
BOOT.IMG:
> fastboot flash boot /path/to/your/ro.secure=0/boot.img
> fastboot reboot
P.S. (to manipulate your boot.img and change the default.prop file under linux you can use abootimg)
ilfastidio said:
I'll add adb/fastboot instruction for those who don't use Windows:
Of course you have to enable developer options, adb debug, oem unlocking
UNLOCK:
> adb reboot bootloader
> fastboot oem device-info
> fastboot oem unlock-go
(and... yes you can lock it back with fastboot oem lock)
TWRP:
> fastboot flash recovery /path/to/your/twrp.img
> fastboot oem reboot-recovery
BOOT.IMG:
> fastboot flash boot /path/to/your/ro.secure=0/boot.img
> fastboot reboot
P.S. (to manipulate your boot.img and change the default.prop file under linux you can use abootimg)
Click to expand...
Click to collapse
you seems to be working on linux, do u have the sources synced on ur pc?
meanwhile i will update the thread to include these to the topic
Sent from my VIBE K6 Power using XDA Labs
ArjunrambZ said:
you seems to be working on linux, do u have the sources synced on ur pc?
meanwhile i will update the thread to include these to the topic
Click to expand...
Click to collapse
I only work on linux. Windows is evil.
I have a big question: why in the default.prop of the russian TWRP.img there is ro.secure=1 ?????
It should be set to 0.
I guess that's why I bricked exactly after flashing Supersu from TWRP...
ilfastidio said:
I only work on linux. Windows is evil.
I have a big question: why in the default.prop of the russian TWRP.img there is ro.secure=1 ?????
It should be set to 0.
I guess that's why I bricked exactly after flashing Supersu from TWRP...
Click to expand...
Click to collapse
as far as i know.. having ro.secure enabled on recovery wont have any effect as we aren't changing anything withrespect to recovery.. but when we change something in system partition with a secure boot enabled kernel we get boot loops
Sent from my VIBE K6 Power using XDA Labs
ArjunrambZ said:
as far as i know.. having ro.secure enabled on recovery wont have any effect as we aren't changing anything withrespect to recovery.. but when we change something in system partition with a secure boot enabled kernel we get boot loops
Click to expand...
Click to collapse
Certainly I'm wrong, but I keep on not understanding. When you are in recovery mode you are loading the kernel inside the recovery and, of course, the default.prop inside the recovery.
That means that you flashed, or are going to flash, a boot.img with ro.secure=0 but running a recovery with ro.secure=1
From recovery you can manipulate system... but with a r0.secure=1 . I don't see a sense in this. But I'm a donkey.
I checked other official releases of twrp, and they all have ro.secure=0 in the default.prop
ilfastidio said:
Certainly I'm wrong, but I keep on not understanding. When you are in recovery mode you are loading the kernel inside the recovery and, of course, the default.prop inside the recovery.
That means that you flashed, or are going to flash, a boot.img with ro.secure=0 but running a recovery with ro.secure=1
From recovery you can manipulate system... but with a r0.secure=1 . I don't see a sense in this. But I'm a donkey.
I checked other official releases of twrp, and they all have ro.secure=0 in the default.prop
Click to expand...
Click to collapse
okay, firstly im also ain't any expert, but i get your point
i dont know why secure boot was enabled in recovery
but when i tried the procedure as explained in the thread i didnt get bootloop ( keeping secure boot in recovery) hence i came to the conclusion that it may not be valid.,, and i may be completely wrong here, if some one could clarify if would be better
Sent from my VIBE K6 Power using XDA Labs
Rooting panasonic eluga note 32GB ROM
Please provide rooting mothod for panasonic eluga note
amnv said:
Please provide rooting mothod for panasonic eluga note
Click to expand...
Click to collapse
sorry i dont have the device
Sent from my VIBE K6 Power using XDA Labs
ArjunrambZ said:
sorry i dont have the device
Sent from my VIBE K6 Power using XDA Labs
Click to expand...
Click to collapse
Its ok brother.. Thanks
My wifi is not working can someone help me? I did this process and after that it's not working
foRgaK said:
My wifi is not working can someone help me? I did this process and after that it's not working
Click to expand...
Click to collapse
i havent experienced this issue
but if u can attach a log file of turning on tbw wifi ,we can help
Sent from my VIBE K6 Power using XDA Labs
Although Motorola has made it facile to unlock the bootloader on its recent or upcoming devices, the manufacturer still warns about these activities. The unlock bootloader method is listed on Motorola’s official site, and has made the process easy and convenient for users and developers. However, once you unlock the bootloader, a message will be displayed warning about the risks associated with it. Although its won’t affect the functioning of your device, users find it annoying at times as it is displayed every time you reboot.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This logo can be used to replace the warning message on any new generation Motorola device. Here, as you may have already setup the adb and fastboot while unlocking the bootloader, you can use the same setup to remove the warning. You can also flash the zip file through a custom recovery, if you have TWRP or CWM on your Motorola device.
Prerequisites
Set up ADB and Fastboot on your computer. You can download the minimal ADB and fastboot tool from download section (unzip it).
Install Motorola USB Drivers on your computer.
Open Settings> Developer options and enable USB Debugging on your device.
Go to Developer options and enable oem unlock.
Remove Unlocked Bootloader Warning
Make sure you have setup ADB and fastboot on your PC.
Download the logo file and transfer the logo.bin file to some place you can track it easily. Its better if you use the folder where you setup the fastboot.
Power off your device and keep it unplugged from your PC.
Boot into bootloader. To do so, press and hold volume down and the power button for 5-6 seconds.
You will see the bootloader screen. Now plug in your device to the PC.
Navigate to the location of the logo.bin file. While the folder with the logo file is open, hold shift on keyboard and right-click on an empty space and select “Open command window here” option to launch a cmd window.
Now type the following in the command prompt to get a code
fastboot flash logo logo.bin
Now type the following in command prompt to reboot.
fastboot reboot
Once you reboot, you will no longer see the bootloader warning as it has been replaced with the Motorola logo. You can choose a custom image you like but be sure it is in .bin extension.
Download Section
Minimal ADB size: 628.5KB
Logo.bin size: 1.26MB
Original Logo: Logo.bin size: 1.3MB
Note: Original Logo has blue background. So it shows a small white N/A text.
Extra Guides:
[ROOT][TWRP][BOOTLOADER UNLOCK] Moto G5s Plus [sanders]
Relock Bootloader Moto G5s Plus
Flash official firmware Moto G5s Plus [sanders]
Appreciate my work?
It is a very hard task to work over mobile data. Please consider making a donation If this guide helped you.
Bank Transfer: Name- Shubham Mishra, A/C no. 8756149523, IFSC code. AIRP0000001
Paypal https://paypal.me/shubhmishra
Awesome mate!!!worked like a charm! got rid of the stupid message! Cheers
Nice
diegomartinezlovey said:
Nice
Click to expand...
Click to collapse
its not the same logo came with Moto G5s Plus
may someone create a logo like it
thanks in advance
yograjfire18 said:
its not the same logo came with Moto G5s Plus
may someone create a logo like it
View attachment 4282762
thanks in advance
Click to expand...
Click to collapse
Yes I can create. I need logo.bin file from official firmware. I dont want to download 1.6 GB just for logo. I have only jio
shu006 said:
Yes I can create. I need logo.bin file from official firmware. I dont want to download 1.6 GB just for logo. I have only jio
Click to expand...
Click to collapse
may u send the original firmware download link, i will send download that and then attach the logo.bin
yograjfire18 said:
may u send the original firmware download link, i will send download that and then attach the logo.bin
Click to expand...
Click to collapse
drive google com/open?id=0B9VEaFoqTCkLX2JUd0lVdzZLUUk
shu006 said:
drive google com/open?id=0B9VEaFoqTCkLX2JUd0lVdzZLUUk
Click to expand...
Click to collapse
Hello Bro, I have attached the logo.bin(zipped) and the logo image
Thanx in advance again
View attachment Logo.zip
yograjfire18 said:
Hello Bro, I have attached the logo.bin(zipped) and the logo image
Thanx in advance again
View attachment 4283607
View attachment 4283608
Click to expand...
Click to collapse
http://hostracon.com/index.php?a=download&q=108
Done. But it is showing a small N/A over red circle. That's why it was white before.
Wow, that was fast.
shu006 said:
Yes I can create. I need logo.bin file from official firmware. I dont want to download 1.6 GB just for logo. I have only jio
Click to expand...
Click to collapse
hi, what program did u use? it seems that logobuilder was not for this...
---------- Post added at 01:56 AM ---------- Previous post was at 01:50 AM ----------
shu006 said:
Yes I can create. I need logo.bin file from official firmware. I dont want to download 1.6 GB just for logo. I have only jio
Click to expand...
Click to collapse
hi... what program did u use for this? logo builder is not i think...
Can someone create with darker color like black or grey? The white and blue are extremely bright when booting up. Thanks
THERAJ12 said:
Can someone create with darker color like black or grey? The white and blue are extremely bright when booting up. Thanks
Click to expand...
Click to collapse
More logo's and somewhat of a how to make your own.
https://forum.xda-developers.com/showthread.php?p=74240673
Sent by way of magic
Hey from where i can find Motorola usb drivers
It says in the instructions you can flash a zip from custom recovery? Can't find a zip file to download in the original post though. Is it as simple as zipping the logo.bin file and then flashing from TWRP?
shu006 said:
Although Motorola has made it facile to unlock the bootloader on its recent or upcoming devices, the manufacturer still warns about these activities. The unlock bootloader method is listed on Motorola’s official site, and has made the process easy and convenient for users and developers. However, once you unlock the bootloader, a message will be displayed warning about the risks associated with it. Although its won’t affect the functioning of your device, users find it annoying at times as it is displayed every time you reboot.
This logo can be used to replace the warning message on any new generation Motorola device. Here, as you may have already setup the adb and fastboot while unlocking the bootloader, you can use the same setup to remove the warning. You can also flash the zip file through a custom recovery, if you have TWRP or CWM on your Motorola device.
Prerequisites
Set up ADB and Fastboot on your computer. You can download the minimal ADB and fastboot tool from download section (unzip it).
Open Settings> Developer options and enable USB Debugging on your device.
Make sure you have setup ADB and fastboot on your PC.
Power off your device and keep it unplugged from your PC.
You will see the bootloader screen. Now plug in your device to the PC.
Now type the following in the command prompt to get a code
fastboot flash logo logo.bin
Now type the following in command prompt to reboot.
fastboot reboot
Once you reboot, you will no longer see the bootloader warning as it has been replaced with the Motorola logo. You can choose a custom image you like but be sure it is in .bin extension.
Download Section
Minimal ADB size: 628.5KB
Original Logo: Logo.bin size: 1.3MB
Note: Original Logo has blue background. So it shows a small white N/A text.
Extra Guides:
[ROOT][TWRP][BOOTLOADER UNLOCK] Moto G5s Plus [sanders]
Relock Bootloader Moto G5s Plus
Flash official firmware Moto G5s Plus [sanders]
Appreciate my work?
It is a very hard task to work over mobile data. Please consider making a donation If this guide helped you.
Bank Transfer: Name- Shubham Mishra, A/C no. 8756149523, IFSC code. AIRP0000001
Paypalhttps://paypal.me/shubhmishra
Click to expand...
Click to collapse
Please help me. My phone is not connect on PC. "Waiting Device" on mode fastboot. I need tutorial to connect my phone on my PC, i want to flash logo.bin. moto g5s+ XT1805
Iaanbandol66 said:
Please help me. My phone is not connect on PC. "Waiting Device" on mode fastboot. I need tutorial to connect my phone on my PC, i want to flash logo.bin. moto g5s+ XT1805
Click to expand...
Click to collapse
Seems like PC is not detecting device.... Download motorola device manager.... Install it on pc and then try to connect (hope usb debugging is already enabled)....
aadi50 said:
Seems like PC is not detecting device.... Download motorola device manager.... Install it on pc and then try to connect (hope usb debugging is already enabled)....
Click to expand...
Click to collapse
I have installed motorola device manager and I have repeated it many times and always failed to connect. I have actived usb debungging
Please help me!
Iaanbandol66 said:
I have installed motorola device manager and I have repeated it many times and always failed to connect. I have actived usb debungging
Please help me!
Click to expand...
Click to collapse
Uninstall any and all drivers for any and all phones/devices, reboot pc, install again
Phazmos said:
Uninstall any and all drivers for any and all phones/devices, reboot pc, install again
Click to expand...
Click to collapse
OK, thanks for tutorial
Hey Friends.
Lets Change the Splash screen from boring Stock style to different Awesome Style.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NEED MORE ??
Dont Worry Just Comment Below With any Design Name like Batman,Superman etc i'll make it for u
Note:- This is not boot animation, this is the splash screen (the 'LeEco' boot logo which is displayed when device is switched ON)
Need Screenshot Plz Find the Attachment from Download Section
Stock Le2(Chinise)
STOCK Le2 Splash Screen
Installation Guide
By TWRP Recovery
1- REBOOT to TWRP Recovery
2- Install stock_splash .zip
3- Hit REBOOT & Enjoy :silly: all new Stylist Splash Screen
By CMD
1- Open CMD
2- Type " fastboot flash splash stock_splash.img "
Dats it.. Enjoy
STOCK (English)
Download STOCK (English) Splash Screen
Installation Guide
By TWRP Recovery
1- REBOOT to TWRP Recovery
2- Just Install stock.v2_splash .zip
3- Hit REBOOT & Enjoy :silly: all new Stylist Splash Screen
By CMD
1- Open CMD
2- Type " fastboot flash splash stock.v2_splash.img "
Dats it.. Enjoy
Ironman Splash
Download Ironman Splash Screen
Installation Guide
By TWRP Recovery
1- REBOOT to TWRP Recovery
2- Just Install ironman_splash .zip
3- Hit REBOOT & Enjoy :silly: all new Stylist Splash Screen
By CMD
1- Open CMD
2- Type " fastboot flash splash ironman_splash.img "
Dats it.. Enjoy
Kingsman Splash
Download Kingsman Splash Screen
Installation Guide
By TWRP Recovery
1- REBOOT to TWRP Recovery
2- Just Install kingsman_splash.zip
3- Hit REBOOT & Enjoy :silly: all new Stylist Splash Screen
By CMD
1- Open CMD
2- Type " fastboot flash splash kingsman_splash.img "
Dats it.. Enjoy
Red Dragon Splash
Download Red Dragon Splash Screen
Installation Guide
By TWRP Recovery
1- REBOOT to TWRP Recovery
2- Just Install dragon_splash.zip
3- Hit REBOOT & Enjoy :silly: all new Stylist Splash Screen
By CMD
1- Open CMD
2- Type " fastboot flash splash dragon_splash.img "
Dats it.. Enjoy
Superman Splash
Download Superman Splash Screen
Installation Guide
By TWRP Recovery
1- REBOOT to TWRP Recovery
2- Just Install superman_splash.zip
3- Hit REBOOT & Enjoy :silly: all new Stylist Splash Screen
By CMD
1- Open CMD
2- Type " fastboot flash splash superman_splash.img "
Dats it.. Enjoy
TOM & JEERY Splash
Download Tom & Jeery Splash Screen
Installation Guide
By TWRP Recovery
1- REBOOT to TWRP Recovery
2- Just Install tj_splash.zip
3- Hit REBOOT & Enjoy :silly: all new Stylist Splash Screen
By CMD
1- Open CMD
2- Type " fastboot flash splash tj_splash.img "
Dats it.. Enjoy
Dragon Ball Super
Download Dragon Ball Super Splash Screen
Installation Guide
By TWRP Recovery
1- REBOOT to TWRP Recovery
2- Just Install dbs_splash.zip
3- Hit REBOOT & Enjoy :silly: all new Stylist Splash Screen
By CMD
1- Open CMD
2- Type " fastboot flash splash dbs_splash.img "
Dats it.. Enjoy
Call of Duty
Download Call of Duty Splash Screen
Installation Guide
By TWRP Recovery
1- REBOOT to TWRP Recovery
2- Just Install cod_splash.zip
3- Hit REBOOT & Enjoy :silly: all new Stylist Splash Screen
By CMD
1- Open CMD
2- Type " fastboot flash splash cod_splash.img "
Dats it.. Enjoy
Pirates of Caribbean
Download Pirates of Caribbean Splash Screen
Installation Guide
By TWRP Recovery
1- REBOOT to TWRP Recovery
2- Just Install poc_splash.zip
3- Hit REBOOT & Enjoy :silly: all new Stylist Splash Screen
By CMD
1- Open CMD
2- Type " fastboot flash splash poc_splash.img "
Dats it.. Enjoy
THOR
Download THOR Splash Screen
Installation Guide
By TWRP Recovery
1- REBOOT to TWRP Recovery
2- Just Install thor_splash.zip
3- Hit REBOOT & Enjoy :silly: all new Stylist Splash Screen
By CMD
1- Open CMD
2- Type " fastboot flash splash thor_splash.img "
Dats it.. Enjoy
Dragon Ball Super GOKU v1.1
Download GOKU Spl Dragon Ball Super Splash Screen
Installation Guide
By TWRP Recovery
1- REBOOT to TWRP Recovery
2- Just Install dbsgoku_splash.zip
3- Hit REBOOT & Enjoy :silly: all new Stylist Splash Screen
By CMD
1- Open CMD
2- Type " fastboot flash splash dbsgoku_splash.img "
Dats it.. Enjoy
Naruto v1.1
Download Naruto Splash Screen
Installation Guide
By TWRP Recovery
1- REBOOT to TWRP Recovery
2- Just Install naruto_splash.zip
3- Hit REBOOT & Enjoy :silly: all new Stylist Splash Screen
By CMD
1- Open CMD
2- Type " fastboot flash splash naruto_splash.img "
Dats it.. Enjoy
Contributor
@me Asish
Credit
@GokulNc for the Splash maker
Thank You
Plz Hit Thanks To Support Me:fingers-crossed::good::good::silly:
Please make call of duty modern warfare type...
And also like Samsung s8
Plz make of dragon ball super , Naruto & One-piece
Done bro
Shahbaz1 said:
Please make call of duty modern warfare type...
And also like Samsung s8
Click to expand...
Click to collapse
Okk bro I will surely make it for u
Sure
PRANAY CHAVAN said:
Plz make of dragon ball super , Naruto & One-piece
Click to expand...
Click to collapse
I will definitely create .. phase by phase ?
How to back to stock splash screen
GOOD JOB
Very good Boi.. I really like it
gautamp123 said:
How to back to stock splash screen
Click to expand...
Click to collapse
By flashing any stock splash screen .. search on xda u will get 1
XdaHunter_Raghav said:
Very good Boi.. I really like it
Click to expand...
Click to collapse
Thank u bro
Thanks for these awesome custom splash ! If possible can you make Arkham and Dark knight triolgy Batman and Justice League !
Please make a mi Screen i want to use it with my miui rom.
@asish265
Could you please make the Stock (English) variant a little smaller? Logo and text are slightly big and it would look better if both logo and text were smaller.
Thanks
please make a csgo splash screen
How to download it ？Please
Can you make TITANFALL|2? I like that!
I've always made the wrong color, By Photoshop CC 2018
can you help me?
---------- Post added at 07:41 AM ---------- Previous post was at 07:28 AM ----------
Can you make TITANFALL|2? I like that!
I've always made the wrong color, By Photoshop CC 2018
can you help me?
Plz Make WONDER WOMEN splash screen
thanks
Please Make SAO , One Punch Man , Konosuba
LeEco Le2 s2
One for LeEco Le2 s2 with only the Thor's hammer & spell (and no thor's photo) "Whosoever holds this hammer, if he be worthy, shall posses the power of Thor "
:good:
Sampath521 said:
Please Make SAO , One Punch Man , Konosuba
Click to expand...
Click to collapse
Noragami as well
[email protected] said:
Noragami as well
Click to expand...
Click to collapse
Even better