[root] T-Mobile Galaxy Tab 4 8.0 T337 - Galaxy Tab 4 Android Development

Confirmed working root method made by chainfire.
OS Version: 4.4.2
Build:KOT49H.T337TUVU1ANF4
Model: SM-T337T
Kernel:3.4.0 date-jun 18
Download: http://download.chainfire.eu/462/CF-...mo-smt337t.zip
Instructions: http://autoroot.chainfire.eu/
This did trigger KNOX however SuperSU disabled it.

Towelroot does the same for the 337a without tripping knox bit. Did it not work for the 337t?

Unless its been updated, i tried about a week ago and and it wouldmt work on the 337t
Sent from my Nexus 5 using XDA Free mobile app

would reflashing stock bootloader and recovery reset the KNOX?
Sent from my Nexus 5 using XDA Free mobile app

HighRidas said:
would reflashing stock bootloader and recovery reset the KNOX?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
No, unfortunately once knox is tripped, it can't be reset. I'm pretty sure the 337 a and t are identical except for bloat and frequencies and I just used towelroot on mine today. Mines the a

I get "your device is not supported" what mod strings did you use Ive tried a few with no success. also, what kernel are you on ive read the some kernels (may 2014) worked but the one I have (jun 2014) did not

My kernel is here. Didn't use any special strings, just downloaded, installed and pushed the make it rain button.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I went into SuperSU after I rooted my SM-T330NU with CF-Auto-Root and it asked me if I wanted to disable knox - I said yes and it disabled it. I also installed Wanam Xposed and used the Security Hacks feature and Faked the system status to be set to "Official". I also deleted several of the knox system apps with Rom Toolbox Pro and it works great. I can still get OTA update from Samsung and no knox messages and knox is not tripped.

when t-mobile tab 4 was released it had a newer baseband n kernel than the other tab 4 devices, thats why towelroot doesn't work on it.
this was discuss in this thread, http://forum.xda-developers.com/tab-4/help/sm-t337t-looking-root-method-t2853724

Does this method alow install custom recovery on t330nu?
I used towelroot and got root access but no luck with a custom recovery such as cwm or twrp would this help or is there any way for custom recovery on t330nu?

Leonidas87 said:
Does this method alow install custom recovery on t330nu?
I used towelroot and got root access but no luck with a custom recovery such as cwm or twrp would this help or is there any way for custom recovery on t330nu?
Click to expand...
Click to collapse
I'm not aware of any recovery for any of the 8" Tab 4 models.
If you root and an recovery becomes available (someone needs to make it) you should be able to install it.

raitchison said:
I'm not aware of any recovery for any of the 8" Tab 4 models.
If you root and an recovery becomes available (someone needs to make it) you should be able to install it.
Click to expand...
Click to collapse
This method only works for the t337t. Chainfire makes all of his root methods by Model and uses stock recovery

8" recoveries should be on their way soon.

Source files have been found and recoveries are in the making.

Leonidas87 said:
Source files have been found and recoveries are in the making.
Click to expand...
Click to collapse
any updates for the recovery yet? Thank you inn advance

thealbundy said:
any updates for the recovery yet? Thank you inn advance
Click to expand...
Click to collapse
We have a few developers looking into it. We have distributed some necessary files for the device. Just need to be patient and work together. All is in motion as for a few days ago nothing was really in motion.
Everyone should stay positive, patient and in due time we should all be happy. All thanks and recognition will be made known upon completion. Thanks to everyone helping out great work so far.

Leonidas87 said:
We have a few developers looking into it. We have distributed some necessary files for the device. Just need to be patient and work together. All is in motion as for a few days ago nothing was really in motion.
Everyone should stay positive, patient and in due time we should all be happy. All thanks and recognition will be made known upon completion. Thanks to everyone helping out great work so far.
Click to expand...
Click to collapse
Thank you very much for this update. I can't wait till the custom recovery gets here for the t337t model

thealbundy said:
Thank you very much for this update. I can't wait till the custom recovery gets here for the t337t model
Click to expand...
Click to collapse
Any news for the custom recovery for the 8.0 yet?

pre4speed said:
Towelroot does the same for the 337a without tripping knox bit. Did it not work for the 337t?
Click to expand...
Click to collapse
Towelroot doesn't work on mine.
Sent from my SAMSUNG-SM-T337A using XDA Free mobile app

Related

[Tool] [ Rooting ] - One click method

Dear All,
We just rooted the Note 3 Model number SM-N900T, version 4.4.2. please have a look at the attached image..
View attachment 2616246
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here I made very simple guide to Root your Note 3, if am right this will work almost all the Note 3... 100% safe method..
Rooting Steps
1. Preferred adb tool on the computer, and have installed adb drivers..
You can install the driver thru the tool..There is option called USB in the tool click there and select option called Driver Scan this will find your phone driver, please enable the USB debugging on your phone before scanning.. USB Driver Scan feature to attempt to automatically construct and install a driver for your device. You do not need the Android SDK. IF not install the driver manual..
2 Please download the attached tool.. Once the Download is done please extract the same and kept it ready.... Mac and Linux user post over the thread I will update that too...
Windows Tool link ( http://bit.ly/1l58VcH )
3 on your phone Settings - Developer option - Enable the USB debugging
4 on your phone Settings - Security - Allow unknown source file install
5 Connect your phone to Computer, using usb cable.. (Wait for 30 seconds)
6 Open the extracted folder and double click the Impactor file..
7 Now click on Start this will start the process.. it will root your phone in 30seconds..
8 Reboot your phone, install the Root checker apk from google play store.. Verity the root access.
Credits - Giantpune.
If you wish buy me a Beer & Click Thanks button..
Invalid Image Attachment.
What do u mean by 100% safe method ? Knox tripping safe ?
How this going to affect Knox??
Added
Image Added...
This will not brick your phone at any cost..
nlatifolia said:
Invalid Image Attachment.
What do u mean by 100% safe method ? Knox tripping safe ?
Click to expand...
Click to collapse
Will it trip knox? Any info if it may work on the n9005?
Give a try
Bro you can give a try.... if am right it will
vash_stanped said:
Will it trip knox? Any info if it may work on the n9005?
Click to expand...
Click to collapse
jacksparao said:
Image Added...
This will not brick your phone at any cost..
Click to expand...
Click to collapse
If it's involving some kind of custom recoveries then I think at some point it could brick someone's phone. CMIIW.
Tried
I tried with many different image which we make for us... Truth I did the experiment to brick... but i'm not able to brick my phone..
If am right this tool is Safe...
nlatifolia said:
If it's involving some kind of custom recoveries then I think at some point it could brick someone's phone. CMIIW.
Click to expand...
Click to collapse
Can anyone confirm that it works on N9005?
You can try
You can give a try...
Extended2108 said:
Can anyone confirm that it works on N9005?
Click to expand...
Click to collapse
jacksparao said:
You can give a try...
Click to expand...
Click to collapse
what can happen in the worst case? Brick?
Thanks, so it is likely to work but also trip knox or it wont trip knox? I'm on the troublesome mj7 where root de la vega doesn't work without tripping knox flag
Signature bugs unavailable
I tried it on the SM900T running 4.4.2 and it didn't work. It said signature bugs unavailable.
Based on this
http://www.saurik.com/id/19 and http://www.cydiaimpactor.com/
but most probably new versions of android has this bug closed...
EDIT: 4.4.2 bugs closed as stated here http://forum.xda-developers.com/mot...cript-root-moto-x-root-script-locked-t2603051
Your right
The tool was working most of the android tools..
jcespi2005 said:
Based on this
http://www.saurik.com/id/19 and http://www.cydiaimpactor.com/
but most probably new versions of android has this bug closed...
EDIT: 4.4.2 bugs closed as stated here http://forum.xda-developers.com/mot...cript-root-moto-x-root-script-locked-t2603051
Click to expand...
Click to collapse
Why is the O.P avoiding the question of whether this will trip knox or not?
Sent from my SM-N9005 using xda app-developers app
supasye said:
Why is the O.P avoiding the question of whether this will trip knox or not?
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
I'm willing to test 4.3 build MK2, I don't care about knox anymore.
I'll keep you posted.
EDIT Didn't work. Signature bugs unavailable.
root
I hope the tool I'll root your phone
oddbehreif said:
I'm willing to test 4.3 build MK2, I don't care about knox anymore.
I'll keep you posted.
EDIT Didn't work. Signature bugs unavailable.
Click to expand...
Click to collapse
I guess we have to wait for signature bugs to be supported?
mcook1670 said:
I guess we have to wait for signature bugs to be supported?
Click to expand...
Click to collapse
Unlikely. Once they've been patched they're not going to un-patch them.

[TOOL]SmartDebloater v3[Windows][N910F/U/H/T/C][14-12-14]

SmartDebloater
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Part Of SmartDroid Project
What is this?
Its A debloater tool that can delete bloat for u.
How to control Debloat?
You have options to choose which apps to delete.
Features
Based on Stock
Odex Support
Full Knox Cleaning
More than 40 Apps to choose from (more to be added on request/research)
Specific Carrier apps In too
How to use?
Drag and Drop the rom/zip to debloat in Original folder
Choose Option to Setup Working folder inside tool
Debloat with more than 40 options
After finishing debloat choose "To Build option" in tool (this compresses the rom back to zip)
Pickup Your Debloated rom in Build folder
Thanks
@ricky310711 (for helping me and being my brother)
​
XDA:DevDB Information
SmartDebloater, Tool/Utility for the Samsung Galaxy Note 4
Contributors
SkywalkerZ, SkywalkerZ
Version Information
Status: Testing
Created 2014-10-26
Last Updated 2014-12-14
Reserved
Download Section
Download V3​
Reserved
Awesome, will try this ASAP
Will OTA work after debloating stock rom?
Mafle93 said:
Awesome, will try this ASAP
Click to expand...
Click to collapse
Thanks..Lemme know
mih3y said:
Will OTA work after debloating stock rom?
Click to expand...
Click to collapse
Umm, once you root, u dont recieve OTA from samsung(as far as i know)
I'd have thought installing a custom recovery stops updates, not rooting. CF root (which all of us use so far?) defaults to the stock recovery after installing supersu.
First non-nexus phone so feel free to demolish my noobish assumption.. ☺
Vangelis13 said:
I'd have thought installing a custom recovery stops updates, not rooting. CF root (which all of us use so far?) defaults to the stock recovery after installing supersu.
First non-nexus phone so feel free to demolish my noobish assumption.. ☺
Click to expand...
Click to collapse
you are making more sense than i did mate XP
and lol...i guess i didnt explain much or because i was lazy
----------------------------------------------------------------
Any one ready to test flashable debloater for N910F?(dont have the device)
I plan making it by the end of next week sooooo
So i can debloat stock flash it via Odin and that will allow me to receive OTA?
mih3y said:
So i can debloat stock flash it via Odin and that will allow me to receive OTA?
Click to expand...
Click to collapse
As stated in OP, you cant debloat .tar files yet(odin stock firmware)
You can only debloat .zip files
Once i add a feature to debloat .tar files... it will be more flexible
Good work!
What does '89 - Others' removes under 'Samsung Apps' selection?
Tom-Helge said:
What does '89 - Others' removes under 'Samsung Apps' selection?
Click to expand...
Click to collapse
right now that is the only option that does not delete anything(talking about the samsung apps)
Vangelis13 said:
I'd have thought installing a custom recovery stops updates, not rooting. CF root (which all of us use so far?) defaults to the stock recovery after installing supersu.
First non-nexus phone so feel free to demolish my noobish assumption.. ☺
Click to expand...
Click to collapse
Correcting it myself; indeed it does stop updates once rooted. Tried to check for update & got this:
Vangelis13 said:
Correcting it myself; indeed it does stop updates once rooted. Tried to check for update & got this:
Click to expand...
Click to collapse
Lol..well your post made more sense but i had remembered facing this issue on my s3(idk if i had just rooted or also installed a custom recovery)
Anyway thanks for clearing the doubt mate
I think this could be due to knox(not entirely sure as there is no knox in s3)
is it work for Galaxy S5 SM-G906S?
JAMESVMPR said:
is it work for Galaxy S5 SM-G906S?
Click to expand...
Click to collapse
This isnt for S5 but I have a similar tool for S5-G900F
U can try that
SkywalkerZ said:
This isnt for S5 but I have a similar tool for S5-G900F
U can try that
Click to expand...
Click to collapse
Even when this S5 SM-G906S has a SD qualcomm 805, 3 gb ram like note 4?
JAMESVMPR said:
Even when this S5 SM-G906S has a SD qualcomm 805, 3 gb ram like note 4?
Click to expand...
Click to collapse
Is this S5 Prime?
work with N910C ?
Is it compatible with Exynos model of Note 4 - N910C? I'm asking because N910U is Exynos also. Many thx.

Possible Root For Note 3 VZW?

My reading comprehension skills may be a little off but from what I gather here is that you can root using old methods but just making sure you use an updated CWM? I'm not sure if I should try it or not. Does this make sense to you guys?
http://galaxynote3root.com/galaxy-note-3-root/how-to-root-galaxy-note-3/
dylancam90 said:
My reading comprehension skills may be a little off but from what I gather here is that you can root using old methods but just making sure you use an updated CWM? I'm not sure if I should try it or not. Does this make sense to you guys?
http://galaxynote3root.com/galaxy-note-3-root/how-to-root-galaxy-note-3/
Click to expand...
Click to collapse
According to the article, Still requires you to be on KitKat for Verizon.
Locked bootloader. No custom recovery - CWM. Don't try it.
Reilly1812 said:
Locked bootloader. No custom recovery - CWM. Don't try it.
Click to expand...
Click to collapse
but can you use apps which require root? I dont really care much about the custom recovery or locked bootloader. so this guide allows that?
robotnikman said:
but can you use apps which require root? I dont really care much about the custom recovery or locked bootloader. so this guide allows that?
Click to expand...
Click to collapse
That guide is ancient and not applicable. You can only use root apps as intended if you have root. If KK 4.4.4 or Lollipop then no root and currently no way to get it. There is no downgrade to any rootable version if you are running 4.4.4 or above. I was happy to stay rooted with 4.3.
And we wonder why boot loaders are locked these days.
I'm hoping this exploit...
https://www.kb.cert.org/vuls/id/155412
in Swiftkey impacts our Note 3s with 4.4.4 and L.
(So sad to hope for holes in your phone so you can have freedom)
Edit:
https://www.nowsecure.com/blog/2015/06/16/remote-code-execution-as-system-user-on-samsung-phones/ ... Looks like it's all there to scoop up.
syserr said:
I'm hoping this exploit...
https://www.kb.cert.org/vuls/id/155412
in Swiftkey impacts our Note 3s with 4.4.4 and L.
(So sad to hope for holes in your phone so you can have freedom)
Edit:
https://www.nowsecure.com/blog/2015/06/16/remote-code-execution-as-system-user-on-samsung-phones/ ... Looks like it's all there to scoop up.
Click to expand...
Click to collapse
fingers crossed that it will be soon. I miss my root.
Just checked the "how to see if you are vulnerable" post/comment by a guy named Charlie (https://www.nowsecure.com/blog/2015...em-user-on-samsung-phones/#comment-2086888243)
If his method of checking is correct, NK1 would be considered vulnerable to this exploit. One step closer.
doesnt look like 5.0 has the vulnerability but from what ive read we can downgrade to nk1, hopefully
ncsuwolfs said:
doesnt look like 5.0 has the vulnerability but from what ive read we can downgrade to nk1, hopefully
Click to expand...
Click to collapse
In LP, it's actually at /system/app/SamsungIME/SamsungIME.apk
Euroca!
CONFIRMED! 4.4.4 NK1 is vulnerable, we can use this Exploit
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
xXArisXx said:
CONFIRMED! 4.4.4 NK1 is vulnerable, we can use this Exploit
Click to expand...
Click to collapse
@hsbadr any idea if you could implement this?
gr8nole said:
In LP, it's actually at /system/app/SamsungIME/SamsungIME.apk
Click to expand...
Click to collapse
Actually yes! Vulnerability available in Lollipop
Its an old phone try cyanogenmod installer
Sent from my SM-N910V using XDA Free mobile app
israfm said:
Actually yes! Vulnerability available in Lollipop
Click to expand...
Click to collapse
So what can we do with this vulnerability right now?
no one can use this ????????????? great
teejaymarx said:
@hsbadr any idea if you could implement this?
Click to expand...
Click to collapse
VZW Note 3 all Android versions (4.4.4 NJ6/NK1 & 5.0 OB6) are vulnerable. However, this gives SYSTEM (uid=1000) not ROOT (uid=0) access. SYSTEM user is capable of writing to many places on the file system, and this makes it easier to implement a weaponized ROOT exploit, if/when available.
hsbadr said:
VZW Note 3 all Android versions (4.4.4 NJ6/NK1 & 5.0 OB6) are vulnerable. However, this gives SYSTEM (uid=1000) not ROOT (uid=0) access. SYSTEM user is capable of writing to many places on the file system, and this makes it easier to implement a weaponized ROOT exploit, if/when available.
Click to expand...
Click to collapse
Do you know if this exploit is able to allow me to remove bloat ware for now, until full root is avail?
teejaymarx said:
Do you know if this exploit is able to allow me to remove bloat ware for now, until full root is avail?
Click to expand...
Click to collapse
You don't need root access to block bloatware; use this tool!

[ROOT/KERNEL] Root Method for FOF6 / 5.1.1

DO NOT USE ON FOG6 FIRMWARE. WILL "BREAK" YOUR CAMERA. CHECK YOUR FIRMWARE VERSION.
Root method for FOF6 / 5.1.1 for the G900t THIS WILL TRIP KNOX. If you don't want to trip knox don't use this. If you do use it and whine you tripped knox because you didn't read ,we will all point and laugh at you.
Named it TrapKernel because well its not my normal HispAsian Kernel and I listened to a crap ton of Trap Music while doing it.
Thanks to @g.lewarne and his root method with his Unibase and Unikernel for the s6 , we finally have root after I ported it over to us. So be sure to thank him for his work.
What's included:
Auto installation of root and busy box
SuperSu.apk
A stock build prop with secure storage set to false so wifi passwords and etc aren't forgotten after reboots.
Kernel set to permissive
Otherwise stock
So here's the deal. Stupid simple.
1. Download the kernel
2. Flash in recovery (if twrp asks if you want to install su say NO)
3. Reboot and profit.
If you need more detailed help go HERE
Download
TrapKernel
Special thanks to:
@g.lewarne for the obvious reason of being awesome and his root method for the s6. I suggest donating to him here [emoji14]
@muniz_ri for testing multiple tests
@jce8419 for testing also
@Chainfire for SuperSU
​
Buy this man a beer!
Funny, right after I downgraded to 5.0 and rooted..
one thing is left. talk @The Sickness into staying and developing for s5.
How does one get twrp without root?
Sent from my SM-G900T using Tapatalk
bgfalcon said:
How does one get twrp without root?
Sent from my SM-G900T using Tapatalk
Click to expand...
Click to collapse
Flash it with odin. Reboot directly to recovery before going to android tho. Or it won't stick.
ShinySide said:
Flash it with odin. Reboot directly to recovery before going to android tho. Or it won't stick.
Click to expand...
Click to collapse
I was letting it reboot into android, thanks for pointing that out.
Sent from my SM-G900T using Tapatalk
ShinySide... you are da freakin man! Installed and working like a champ... now I can start debloating since the other method wasn't working. WOOT!
thanks will give props when I make my 5.1.1 rom
Gosh darn it! This is what 5.1.1 needed but @The Sickness is forever gone having moved onto the S6.
Sent from my SM-G900T using XDA Free mobile app
@ShinySide I know this is early in the game for this kernel, but do you plan on tweaking this at all? Just curious...
andROIDS said:
@ShinySide I know this is early in the game for this kernel, but do you plan on tweaking this at all? Just curious...
Click to expand...
Click to collapse
Yes
also your not the only one who listens to trap music while developing lol
Malbert I bet your ready to start cooking
Sent from my SM-G900T using Tapatalk
Great job man!
can't wait to see all the 5.1.1 roms
If I'm not rooted, do I need Odin or can I just flash the kernel with the phones OEM recovery? Sorry if this is a stupid question. Haven't been rooted in a while
lol
adam5150 said:
Malbert I bet your ready to start cooking
Sent from my SM-G900T using Tapatalk
Click to expand...
Click to collapse
Im done thats the funny part once I saw this I was out.
Lost WiFi calling
.
Anyone else lose WiFi calling after applying this root method ?
WiFI calling error ER802.
(Was a stock S5 5.1.1 )
Thx
jimmycinla said:
.
Anyone else lose WiFi calling after applying this root method ?
WiFI calling error ER802.
(Was a stock S5 5.1.1 )
Thx
Click to expand...
Click to collapse
Not me. Try deleting data out of the wifi calling in application manager and force close wfcservice and toggle wifi calling
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
coldhardtruth said:
If I'm not rooted, do I need Odin or can I just flash the kernel with the phones OEM recovery? Sorry if this is a stupid question. Haven't been rooted in a while
Click to expand...
Click to collapse
Odin twrp then flash kernel

Root Android N Developer Preview [Discussion]

Okay, so previewers and testers, Chainfire has finally updated SuperSU to support the N Developer Preview
UPDATE: SuperSU v2.70 has been released.
Click to expand...
Click to collapse
Roll up your sleeves, and root right now.
Here's the thread: http://forum.xda-developers.com/apps/supersu/wip-android-n-preview-t3335726
NOTE: Be sure to roll back to N Preview boot.img, just in case you have tried other root methods. Share the results and issues (if any)
Click to expand...
Click to collapse
I have written a tutorial, you can view it, if you like: Root Android N Developer Preview
Also read - Android N Features - What We Know So Far
Franco's Kernel is now available for N Preview: http://forum.xda-developers.com/showpost.php?p=65836126&postcount=3093
A new update for Preview 1 is now available: http://www.droidorigin.com/android-n-developer-preview-update/
If you want to roll-back to latest stable software: http://www.droidorigin.com/return-from-android-n-developer-preview/
nfl46 said:
Thanks! I've been waiting for this.
Click to expand...
Click to collapse
Thanks to Chainfire, I am just sharing
So... If I'm on stock N (stock system, stock boot.img, stock recovery, etc.), would the easiest way be to just flash the latest TWRP and then flash the SuperSU zip? Just want to make sure I'm understanding everything correctly
Sent from my Nexus 6P using Tapatalk
Othoric said:
So... If I'm on stock N (stock system, stock boot.img, stock recovery, etc.), would the easiest way be to just flash the latest TWRP and then flash the SuperSU zip? Just want to make sure I'm understanding everything correctly
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Yes :good:
But, in case you have forced encryption, and the package doesn't flash, you can feel free to use the CF-Auto-Root package.
So I can use TWRP to roll back to my Marshmallow I'm currently on using the restore function if N doesn't cut it for me? Would I have problems with encryption or userdata by restoring (assuming I've backed up everything)?
What are you guys using for modified boot img to disable forced encryption? Thanks.
nfl46 said:
Do you, by any chance, have root working on your 6P running Android N?
Click to expand...
Click to collapse
Works for me on my 6P after trying the phh SuperUser method for the past few days. It doesn't appear to mount /system as r/w though
ripv2 said:
What are you guys using for modified boot img to disable forced encryption? Thanks.
Click to expand...
Click to collapse
http://forum.xda-developers.com/nexus-6p/general/stock-modified-boot-img-regular-root-t3306684
nfl46 said:
Do you, by any chance, have root working on your 6P running Android N?
Click to expand...
Click to collapse
Yeah, it has been hours
viper2g1 said:
So I can use TWRP to roll back to my Marshmallow I'm currently on using the restore function if N doesn't cut it for me? Would I have problems with encryption or userdata by restoring (assuming I've backed up everything)?
Click to expand...
Click to collapse
If forced encryption is disabled on Android N, it would stick if you flash a custom ROM.
Root is working fine. Have TWRP booting fine and installed kylo kernel. All I need is xposed and I'll be super happy with this preview! ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Nexus 6P using Tapatalk
Is there any custom kernel working with N to enable wake and sleep gestures?
17akota said:
Root is working fine. Have TWRP booting fine and installed kylo kernel. All I need is xposed and I'll be super happy with this preview!
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
How did you flash twrp?
I tried yesterday after taking the OTA to N, and no success. =(
Just testing
Sent from my HUAWEI NXT-AL10 using XDA-Developers mobile app
Anyone come across a file explorer that can mount System R/W? I'm using https://play.google.com/store/apps/details?id=nextapp.fx&hl=en with SuperSU 2.69 and it's not able to even though the app itself does have root access.
betovanbuuren said:
Is there any custom kernel working with N to enable wake and sleep gestures?
Click to expand...
Click to collapse
Not sure about that, but franco.kernel is now available for the N Preview
betovanbuuren said:
Is there any custom kernel working with N to enable wake and sleep gestures?
Click to expand...
Click to collapse
Yes kylo kernel r4
uodii said:
Anyone come across a file explorer that can mount System R/W? I'm using https://play.google.com/store/apps/details?id=nextapp.fx&hl=en with SuperSU 2.69 and it's not able to even though the app itself does have root access.
Click to expand...
Click to collapse
Try Solid Explorer, it was working when I was on N: https://play.google.com/store/apps/details?id=pl.solidexplorer2&hl=en
I think Root Browser works too, at least I remember reading that somewhere.
bouchigo said:
Try Solid Explorer, it was working when I was on N: https://play.google.com/store/apps/details?id=pl.solidexplorer2&hl=en
I think Root Browser works too, at least I remember reading that somewhere.
Click to expand...
Click to collapse
I updated to SuperSU 2.70 and all worked fine. Thanks though!

Categories

Resources