Q&A for [ROM][Linux/XBMC] Native Linux for Amlogic based Tv-Box's {08/24/2014}
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
addons dont work
So, i'm sorry if my question was solved in last pages....
Install...done
XBMC works smooth
But i cannot install any addons, or skins or anything...
How i can solve this?
Thanks very much!
MX Linux on G18REF with build 6/5/14
I just received my generic "MX" box which is a G18REF and currently has build JDQ39.20140605. Kernel version is 3.0.50. I would like to install MX Linux on this box and am wondering if I needed to a firmware 1.1.5 downgrade first as I saw mentioned elseware. How can I confirm this? Thanks!
remote
Hi all,
great work, I have a vcom dv141d box I have tried the mxlinux and the openelec and I have the same issue, as soon as the image is applied the remote stops working, I can use a usb remote but the IR won't work, as anyone got any ideas how to get this to work again ?
Thanks for the great work
---------- Post added at 09:44 AM ---------- Previous post was at 09:26 AM ----------
Hi,
Thanks for the great work, I have tried the mxlinux image, when I convert using the stvmx conversion, my remote stops working I have a vcom dv141d box that's a g02 ref, everything works fine but I have to use a usb keyboard its like the IR as been killed, does anyone know how to solve this
Thanks
Jynxbox M1V2 Pure Linux
Hello everybody,
is it possible to flash this rom to the box mentioned on the title?
Thank you very much for your time and answer
G02 kernel source and config
Hi,
Thanks for these ROMs - working great on my ATV1220 (G02).
Please could you point me at the source code and config used for the kernel build? I see some kernel repos at https://github.com/CoreTech-Development but none that seem new enough given that the release changelog suggests that a kernel from March 2014 is being used.
Has anyone tested any of these roms on Bluetimes MX5 G02ref box.
Sent from my SGH-I747M using Tapatalk 2
@perro69
i was reading another thread and found that an openelec M8 image has been released :
http://forum.xda-developers.com/showpost.php?p=56366456&postcount=211
G02REF
I beleive on page 72 of MX-Linuxs thread it stated that gotham-beta2 was a working broadcom version on a droidstick a2
now yes i can get rc1 to work no problem but with no connection it was useless last year.
Excited reading about Vitaly_S work i flashed an old A2 stick laying around with BETA 2 (didnt work) and the next comment as an updated build MX_LINUX-G02REFDONGLE_170514.....
I apprecite everyone and anyones work over the past year roughly as i was watching this thread from the beginning
IE.. croniccorey and vitaly_S
just wanted to share that after upgrading screen goes black then after restarting stick its a greenish yellow.
so the AM6086A ------ A2 stick is not complient with this release
Thanks guys, any ideas otherwise please let me know.
Please help me
I got this box http://www.ebay.com/itm/201132479393?_trksid=p2060778.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT I think its a cheap mx 2 android tv box
and ive been trying to get xbmc to work on it with no luck, i flashed it with xbmc linux, I followed these steps - http://forum.xda-developers.com/showthread.php?t=2418029 and it worked without wifi but when i turnd the box off for the first time it wouldnt come back on so i sent it back for a replacement one. my new one should be here soon and the only thing i care about is xbmc. the problem i have with xbmc on android software it comes with is it works fine till i turn it off and back on then it only loads like 1min of my movies and its like wifi quits working or something, please help so i dont ruin another box. any help would be appreciated
Thanks
reefmonger said:
Has anyone tested any of these roms on Bluetimes MX5 G02ref box.
Sent from my SGH-I747M using Tapatalk 2
Click to expand...
Click to collapse
I just reread all 107 pages again to see if I missed something. Has anyone had success with these roms on Bluetimes mx5 g02ref meson6 ?
Sent from my SGH-I747M using Tapatalk 2
imx6 box
Hi, bought a mx clone from aliexpress want to upgrade the firmware, can I use matricon updates?
toothpick doesn't work
How to Restore your Recovery when toothpick doesn't work for mx android box?
MXQ S85
Hi
I bought this box from Gearbest. Its the MXQ S85 Amlogic S805 Quad-Core Multimedia Android 4.4.2 TV Box
I am looking to load Linux on it for XBMC, any recommendations out there for versions available that will work? Thanks
Mygica atv1200 rebooting over and over
I tried to install the mx Linux build for atv1200 posted in the forum here. it said to run the conversion file first then flash the latest release for geniatech/mygica atv1200. I made the sdcard up following the instructions in the readme file included. when I popped the sdcard in and did the upgrade process, it booted to a screen with the Linux penguin, and a yellow progress bar. I seemed to finish then reboot. but it has been doing that same process over and over for the last hour, and it seems not to be working. I tried to revert back to android but it would not boot. I tried making bootable sdcard with geniatech uboot bin, and mygica rom, but it woin't boot. then I made the sdcard with the mx Linux conversion files again, and it boots, but just keeps rebooting with the penguin screen and the progress bar. any help would be greatly appreciated. seems like there are not a lot of people having the same problem cause I cannot find a solution anywhere.
mx2update.zip for v1.1.5 is corrupted
mx2update.zip for v1.1.5 is corrupted
I can open all the other version mx2update.zip, like 1.1.6, but not for 1.1.5.
---------- Post added at 06:57 PM ---------- Previous post was at 06:50 PM ----------
Hi,
How to un-brick this box.
G-Box Midnight rev 2.2, 4GB Storage, 1GB RAM, A9 Neon CPU.
was running "Linux inside, XBMC 12.2" tried to update to android firmware 1.2.2.
now only getting black screen. The blue light comes on, but none of the firmware i put on my 1GB SD card get me any display. I try holding the toothpick for about 2 mins, but no sign that it is working.
Can't get into recovery, even if i am there no way to be sure.
Can someone help me?
Thanks.
Amlogic M3
I managed to flash an early xios linux "the hydra" xbmc onto my amlogic droid stick but the wifi is completely gone which makes it hard to do anything. For some reason my unit doesn't have a bootloader, nor a reset button (so i'm doing the advancedlauncher -> sh -> reboot recovery way in xbmc) and there doesn't seem to be any other recovery roms available for it.
Figured i'd try the M3 linux from here, but apparently this is configured to assert a getprop for specific hardware. I can change that myself, but when i sign the zip my unit refuses to go past that verification. With this rom the signing verification is fine, but assertion fails. I can fix that myself but how did you go about and sign the zip? I've tried a few different ways (apksigner, jarsigner) to no avail. There is very little information on what recovery (3e) actually checks, any clues on how to resolve that? (All it says is signature verification failed when i sign, with test keys and self made other keys).
Best
Crypth
Which firmware for generic G18REF
Hi I purchased a generic MX2 G18REF,
Which firmware should I install Matricon 1.1.5 or 1.1.6 before installing Linux MX?
Thanks
Cheap DX M3 stick won't work.
I just flashed the M3 (f16ref) based one on my cheap Amlogic AML8726-M3 stick (1gb ram, 4gb nand, 1.5Ghz), this didn't quite work out and it seems i can't flash other stuff on it either now. Just want to warn anyone else trying this
Codesnake help needed
I have a square s802 M8. I recently tried several different OpenELEC zips, most zips received NO FOOTER errors and would not install but most of the ones that did install, did not have any access to wireless networks under OpenELEC settings. Including Codesnakes ROMs. They would not allow access to wireless networks. So, I finally came across a Russian zip on xbmc.ru that installed and it is the latest developer zip found at: OpenELEC-Amlogic.S82.arm-devel-20150113183017-r20272-g0481f0c.zip. After zipping it to the s802, I realized it is for the S82. It still worked but it seems to have some bugginess. It is getting stuck on the opening stream window and the working spinning wheel is getting stuck too often. I am used to Stane's MX Linux and got spoiled with speed. Please help, I need a network working .zip with audio/video synced properly and speed. Any suggestions on a more suitable ROM zip? All of codesnake's OpenELEC ROMs seem to not have wireless networks enabled. Is there a way to have ethernet hooked up after installing codesnake's zip and then get wireless by downloading a network setting addon or enabling an OpenELEC setting feature??
Related
Q&A for RK3066 Tab Genio by Oma rocks !
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Hey, I am new here. (I apologise for my bad english)
I have an a Xvision 101p11c i wanted to know if is there a kernel for this tablet.
res: 1280*752
rk3066
same wifi chip
screen and touch chips i can find it
please =/
Good time of day. Possible to alter the firmware for the installation of the recovery?
@oma
The latest CM10.1 v. 1.4 include HW accellaration?
Thanks
Thanks OMA!!
You made my day, my two Pipo S2 works like a charm now!
Thanks for your great work!
I also have an Measy stick based on RK3066, is there any firmware for this gadget to?
Regards // Cyberott
Dear sir i need this tablet rom
Dear boss
i need this tablet rom
Ds733-v3.0 2012.10.08
please sahre this rom
i need very very urgtently
thanks you very much
YuanDao N101II
Hello Oma, first of all thanks for your work. I flashed ROM for my Yuandao N101 II tab based ono your work I got from VonDroid - unfortunately the touch screen didn't work. It worked neither with your rom nor with the newes original firmware. As this was described by some other folks there - for some specific sub-model maybe - and as the touchscreen works with an older stock-rom - this seems to be software-related.
Is there any possibility to overcome this issue? The firmware that is working gives me infrequent hangs for no reason and was described as buggy by other users, too.
Thanks a lot in advance for your help
pmp 5780d_duo
HI to all . i am new here ,i have this tablet prestigio 5780d_duo .i wanted to flash other rom then this official s..... can some one plz tell me which rom is best for this tablet,and plz give me link for rom and kernel. ty in advance
HELP :C
Hi Sir Oma good day
im using your CM10.1 for rk30
i have only one bug the brightness i already reflash the boot.img on your page
and flashed the brightness fix via CWM
but the thing is it doesnt work my tab has full brightness and my battery is
too fast to drain can you make a fix for me?
im using oplus 9.76 from philippines
if you need my kernel here it is
Again the unresponsive touch screen
Hi @ all, as specified in my last post there is a difficulty with the touchscreen with a version of omars great fw that has been ported to VonDroid with minour changes. So, to find out if my tablet's touchscreen can work with this fw, I dug a bit deeper and located the touch screen driver.
input: Goodix Capacitive TouchScreen as
/devices/virtual/input/input3
<<-GTP-INFO->> GTP Driver Version:V1.0<2012/05/01>
<<-GTP-INFO->> GTP chip version:GT81XNI_3R19_000
The only documentation I could find so far is that documentation for this device is lousy and chaotic as is supply with drivers... seems to be quite a fair description. Until now, I found no way to locate additional hints about what touch screen might be built in my tab. Neither online nor on the tablet itself.
Anyhow, some questions came to my mind on and on again, as the last fw supporting the touchscreen is a tiny little bit buggy:
Might there be a chance that the specified touch screen works with the fw? If no: Is there a possibility to configure the fw in a way that it will work?
It would be very nice to find out more on that as I don't want to simply do the same procedure as I did last time: spending about two days to install the same old buggy fw in the end. This is definitely not satisfying.
Thanks a lot for any hint - I tested the fw with mouse and keyboard, but that's no way for working long time if you know you've got a touchpad. Nonetheless, it was long enough to get quite surprised what my tablet is capable to do - and willing to do some work for having these capabilities
Meanwhile, I'll dig deeper
[edit] Guess I found some metal - hope, it's silver at least...
github.com/Ceastel/CeXstel-kernel-msm8x25/blob/master/drivers/input/touchscreen/gt968.c
Goodix driver Version 1.0 .
Is there a possibility to add that to the rom? Woud be great...[/edit]
[edit2] maybe it's rather one of these drivers - at least the build date is the same my machine specifies.
github.com/Ceastel/CeXstel-kernel-msm8x25/blob/master/drivers/input/touchscreen/goodix_tool.c
github.com/crewrktablets/rk30_kernel/blob/master/drivers/input/touchscreen/gt801plus_819_8105_8110_update.c
help me with my screen rotation
heres my new sensor reading
- tab vertical, landscape (y=+9.4)
- turn left to portrait (x=+9.7)
- turn right to portrait (x=-9.6)
- tab horizontal screen up (z=+10.0)
when i tilt my tab to +y my screen got reverted to -y same with x axis. ive dscovered that my y axis is portrait not landscape just like phones axis direction
Icoo d90pro
How can i use your firmware on my device ICOO D90PRO ? I would like to get OC kernel compatible on my device and other . . . Thanks !
USB Host Modem
Hello
I'm using OmniRom 4.4.4. v1.3 on my rk3066 PiPo Max M1. It works flawlesly, but there is one thing that bothers me. With stock 4.2.2 chinese rom I've been using usb modem(HUAWEI) to connect to the internet, which I've been connecting to HOST port.
After flashing OmniRom, the usb modem does not work. It does show up in USB Host Controller app, the storage in stick, works too, but it won't find mobile network. It gives me an error when searching for network.
Is there some setting that I should set or anything else to get it to work?
lazyNeighbour said:
Hello
I'm using OmniRom 4.4.4. v1.3 on my rk3066 PiPo Max M1.
Click to expand...
Click to collapse
Could you post the link of this ROM? I'm very interested.
Petitgibus said:
Could you post the link of this ROM? I'm very interested.
Click to expand...
Click to collapse
Here http://forum.xda-developers.com/showpost.php?p=54300296&postcount=1118
Does anyone has a discolored yellow screen when using AOSP JB 3.4 for RK3066?? If yes is there a solution for this ??
Sent from my WT19i using xda premium
Multiple Tablet Supported or Specific
Sir
This ROM is specific for PIPO tab or I can use it with other RK3066 Tablet ? I have APPTAB And no firmware is available on internet . So Can i Upload your Custom ROM, ?
ahtisham200 said:
Sir
This ROM is specific for PIPO tab or I can use it with other RK3066 Tablet ? I have APPTAB And no firmware is available on internet . So Can i Upload your Custom ROM, ?
Click to expand...
Click to collapse
Before flashing anything do a backup from your stock firmware. You can google about how.
Usually changing the kernel.img for the stock of your tablet and flashing the ROM it might work (sometimes wifi, etc. Not). Also is important to know if your kernel is 3.0.8+ or 3.0.36+.
Cheers
I have a problem
Hi Oma! I have an Manta MID702 , but when i install your cm 10.1 on it, it boots, but i cant use the tablet cause there is a message: android.com.phone process has stopped. It reappears every time i close it. What can i do? Thanks in advice
To sum it up once more: I've got a touch screen that works with the original firmware but won't respond on the other roms. Problem: The original firmware is lagging and quite frequently simply coming to a halt.
Loewe_78 said:
input: Goodix Capacitive TouchScreen as
/devices/virtual/input/input3
<<-GTP-INFO->> GTP Driver Version:V1.0<2012/05/01>
<<-GTP-INFO->> GTP chip version:GT81XNI_3R19_000
[edit2] maybe it's rather one of these drivers - at least the build date is the same my machine specifies.
github.com/Ceastel/CeXstel-kernel-msm8x25/blob/master/drivers/input/touchscreen/goodix_tool.c
github.com/crewrktablets/rk30_kernel/blob/master/drivers/input/touchscreen/gt801plus_819_8105_8110_update.c
Click to expand...
Click to collapse
Is there a possibilitäy to built a firmware that has the driver for the digitizer I specified? Would be great. I've got the orignal firmware.
Q&A for RK2918 Tab Odys-Loox rocks with CyanogenMod 10 / 10.1!
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Alcatel T10 Upgrade
tinko975 said:
finally, i did my alcatel t10 working right..
flashed it with Oma_Odys_Loox_JB_CM10_4.1.2_v1.2, used Oma_CM10_intSD_to_NAND_OTG_fix and Oma_CM10_v1.2_Format_NAND with JK-CM10-Pascal2-oc1104_20121203 kernel. no bugs, no rotations and cpu oc 1.1 ghz..
tnx, but we want cm11..
Click to expand...
Click to collapse
Hi!
I saw your post regarding your alcatel t10 being upgraded to jellybean..
can you please guide me on how to do it and what are the items that i need to install..
Thanks!
i forgot it, sorry.. now is stock rom on that device..
Hi Oma,
Can you please help me determine what are the things that I need to download in order for me to upgrade my Alcatel T10.
I've been reading threads about upgrading its firmware to Jellybean but it came to a point that I got confused and really don't know what are the stuffs that I need in order to upgrade my tab to jellybean.
I am new to this kind of stuff and I will appreciate if you can also provide me the step by step guide on how to upgrade may to tab to jellybean..
Thanks in advance!
If you never did this there are very big possibility that will btick device.. I tried several roms but return to stock debloated and rooted.
Problems with generic RK2918 ICS tablet
Hi all!!
I'm new to this forum (and pretty much to Android scene in general), so please, be lenient with me in case I unadvertedly infringe any forum norm. The matter is, I've been looking for some info about a generic RK2918 tablet I bought about 2 years ago, to no avail. As of late, the device is acting strangely (random reboots and/or stuttering running apps that it managed effortlessly a couple months ago...). I'd like to know how to flash it, as well as which rom I should install in order to make my tablet reach its maximum potential. I've heard great things about Oma's CM 10.1 AOSP roms, but I don't know which one would suit my device best.
My device's specs go as follows:
The tablet is a IMD "|97D", a 9.7" inch, 4:3 aspect ratio screen running under Android ICS 4.03
RK 2918 CPU at 1.2 GHz
1 GB DDR3 memory
16 GB NandFlash
max 32GB microSD support
WIFI 802.11 b/g/n support
G-Sensor
dual micro USB, one of them OTG
10 point capacitive screen with IPS 1024 * 768 resolution
2MP front and back cameras
The device is currenly running under its default firmware (i.e. no root access). Any help and/or piece of advice on how to proceed would be extremely welcome. Thanks in advance!!
Sir Oma,
I flashed this rom to my Alcatel One Touch T10, CrewRKTablets_RK29_AOSP_4.2.2_r1_v1.3_20130714 with stock kernel 308 Alcatel T10 and
applied CrewRKTablets_AOSP_4.2.2_Format_NAND_fix. It is pretty stable however the battery status monitoring is not working. I have also
tried the other kernels said to be compatible with T10 notably the Pascal2 kernels. They seemed to work Ok but the screen display was
off-center, display was leaning to the right side of the screen. Same result when using the other stock kernel 308 Alcatel T10_2.
My only concern is the battery status monitoring, it remains stationary all through the whole hours of tablet use. Charging detection
is also not working. The rom however can detect the current battery status only when rebooting. I did try to apply the akku fixes for
JB and CM10, (though not intended for the AOSP rom) none worked. It ended up in bootloops.
Can you suggest a battery fix intended for CrewRKTablets_RK29_AOSP_4.2.2_r1_v1.3_20130714 rom? Of all the JB 4.2.2 offering found
at CrewRKTablets site, this rom proved to be useful and stable to my Alcatel One Touch T10 tablet. There are some minor function
issues like display resize "fit to standard screen" option, it does not work. Camera image is upside down. But I guess to a standard
user (like me) these function should not pose a serious problem as installing and running apps intended for JB 4.2.2 works smoothly.
Thank You and More Power!
@ tinko75, tried the BQ-pascal kernels too but to no good.
Hello,
I´ve got the neo X7 and because my sis and i want to use it and i have heard that you can choose between two accounts at this ROM i want to installt it.
I have the s4mini with CyanogenMod 12 but about that i´m clear but with the Neo X7 i have no Idea how that works... so can anyone explain me how to install it (maybe a step for step Instruction)
The Tablet is in a originally condition (there is no CWM or anything else. So i need all...
Thanks in advance
and I´m sry for my bad Englisch but i´m from Germany and just at school.
greetings by Kainze
Arnova 10b g3
Hi,
i've installed the CM10.1 v1.21 rom on my arnova 10b g3.
I've some batterye issue... i've tested the akku fix but informations are only updated after reboot but not in real time...
I haven't installed other fix... Do i need some specefic fix for my arnova?
Regards,
OtolizZ
---------- Post added at 11:38 AM ---------- Previous post was at 11:13 AM ----------
Hi,
i've installed the CM10.1 v1.21 rom on my arnova 10b g3.
I've some batterye issue... i've tested the akku fix but informations are only updated after reboot but not in real time...
i've also some issues with the TouchScreen... it seems to be not well calibrated, i've to touch the screen just under the spot i want to...
I haven't installed other fix... Do i need some specefic fix for my arnova?
Regards,
OtolizZ
Bricked Pmp5097
After flashing my PMP5097 cm10 I got bricked device. At startup tablet defined as "unknow device", but the screen is black
Help, please
Sorry for my english
Q&A for [ROM][Full Android for Shield Console][v.1.4]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][Full Android for Shield Console][v.1.4]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
USB Audio issue & Xposed installation Arm64
While I am loving having a standard android experience on my Shield Android TV, I don't seem to get any audio out via USB. The DAC I am using is locked to 24 bit 96khz and shows as being synchronised but I get no audio. Audio is still coming out of HDMI. Everything worked with standard firmware. The setting for preventing automatic USB audio routing in developer settings is switch off... anyone have the same issue and know how to resolve?
Also - as mentioned by another poster - I am receving an error when trying to install Xposded. The error message suggests that it is looking for the arm (32bit) version rather than the 64bit. I am pretty certain we should be using Arm64 - so am I doing something stupid when trying to install via TWRP?
Bee
no change with 1.6
boboskins said:
While I am loving having a standard android experience on my Shield Android TV, I don't seem to get any audio out via USB. The DAC I am using is locked to 24 bit 96khz and shows as being synchronised but I get no audio. Audio is still coming out of HDMI. Everything worked with standard firmware. The setting for preventing automatic USB audio routing in developer settings is switch off... anyone have the same issue and know how to resolve?
Also - as mentioned by another poster - I am receving an error when trying to install Xposded. The error message suggests that it is looking for the arm (32bit) version rather than the 64bit. I am pretty certain we should be using Arm64 - so am I doing something stupid when trying to install via TWRP?
Bee
Click to expand...
Click to collapse
Still not getting USB audio (24bit/96k) in the latest versions of the ROM. Is this a problem for anyone else? Really need USB audio so will need to go back to stock if this isn't going to be resolved. Happy to try and help with any troubleshooting.
Bob
USB devices DAC and DVB-T
Wow!, thanks Zulu great job!.
How works the rom with USB DVB-T tunner? somebody test it? Kodi recognizes it without special apps?
Discard: <--And with USB audio card? can you play one sound throught hdmi and another throught DAC simultaneously?-->
excuse my poor english..
Gud
Zulu99, thank you for developing this.
i like your full Android room for nvidia shield tv and i want install for my console
but i have some question If you do not mind
1- If i want to re-install the stock room How do it.
2- how i can unlock boot-loader.
3- i want step by step to install your room in my console
best regards and thanks to you
---------- Post added at 09:05 AM ---------- Previous post was at 08:59 AM ----------
Zulu99, thank you for developing this.
i like your full Android room for nvidia shield tv and i want install for my console
but i have some question If you do not mind
1- If i want to re-install the stock room How do it.
2- how i can unlock boot-loader.
3- i want step by step to install your room in my console
best regards and thanks to you.
Hi zulu99
if i flash your room can re-install the stock room after thats
because i like full android. and i want know is your room have arabic language
and how can make it step by step
best regards
Messed up big
Hello all.
So I followed this guide but I messed up on one crucial step. Instead of just wiping user data and cache I also wiped (system). In any case I was able to flash the ROM and it fully boots with all the sweet animations but it boots to a black screen. I only see the mouse and that's all.
If I hold the power button I only get the option to power off.
Any tips?
Note: very inexperienced with Android but overall technically inclined
please help need a zip to recover my system in adb sideload
hey guys need some help i soft breaked my device and need to flash the update 1.3 to get it back but i need it in zip form to get it to load in adb sideload its the only way to install on my shield console i have lost the driver and my computer wont recognize the drivers when i install manually need help bad
I have two questions.
1. I tested Ethernet,the rom can‘t work in 1000m，only 100m
2.vpn not use
3. I want to use nfs. But found no nfs file manager。
thanks!
could someone with privileges incluye a thread about dvb-t and dvb-t2 tests?
I'm noob in xda and have not publish 10 post yet
But I think it would be interesting to check the stv
capabilities with USB dvb t/t2 tunners especially
with the complete lollipop room
If the kernel includes all the requested modules
I will try to install a tvheadend to stream TV to
all the devices..... Like hdhomerun but with a 30$ tuner
With the x1 CPU I'm sure that can to connect 2
or more tunners to do pvr or stream different channels to devices
Thanks in advance and excuse me if is not the place to post this message
STVInterested said:
Wow!, thanks Zulu great job!.
How works the rom with USB DVB-T tunner? somebody test it? Kodi recognizes it without special apps?
Discard: <--And with USB audio card? can you play one sound throught hdmi and another throught DAC simultaneously?-->
excuse my poor english..
Click to expand...
Click to collapse
Gapps..?
I've rooted and installed the rom and working well. Very nice work! I am having problems installing Gapps. Perhaps it's the wrong version. The link sends you to a github link and I've used that. After flashing that gapps I still have no google services. Can you provide the gapps file name I need to download? thanks much
Fire TV box remote pairs fine
Was able to pair the Fire TV remote with this rom. Go into pairing, hold home button down on remote and refresh. Works great.
Hello guys. This rom is great, but I don't have Dolby digital sound anymore after flashing it. Anyone with the same issue? Any advice to solve it? Thanks.
Sent from my XT1563 using Tapatalk
---------- Post added at 12:05 PM ---------- Previous post was at 12:02 PM ----------
The Netflix app on stock rom had perfectly good Dolby digital sound...
Sent from my XT1563 using Tapatalk
Nvidia Shield controller no longer works after full Android is installed on Shield TV
I was able to install full Android on the Nvidia Shield TV. The problem I have now is that the Nvidia Shield controller no longer works. Is there any app available that would enable the Shield controller to work with the full Android on the Shield TV?
Thanks Zulu for the amazing work.
Any chance you could post the source for your ROM? I would love to do some hacking on it.
---------- Post added at 10:40 PM ---------- Previous post was at 10:17 PM ----------
phuongle1068 said:
I was able to install full Android on the Nvidia Shield TV. The problem I have now is that the Nvidia Shield controller no longer works. Is there any app available that would enable the Shield controller to work with the full Android on the Shield TV?
Click to expand...
Click to collapse
Nope, see the OPs post here: http://forum.xda-developers.com/showpost.php?p=62443196&postcount=233
Would this run decent with a 2gb Octa core Android box or is it specific for a nvidia box?
I would jump on this like a shot if the wireless controller worked
Sent from my SM-G920F using Tapatalk
Use it wired with a 3m mini usb..
Envoyé depuis mon SM-G925K avec Tapatalk
I would do but my dog would eat it lol
Sent from my SM-G920F using Tapatalk
Hello, I recently bought a GT1. I would have liked to switch to Android TV but none of the available roms is compatible with my box, each time it's a brick, forced to flash the basic rom. Looking better, I did not find a compatible ROM with my serial number starting with LPN1. Do you have a track to flash something that works or there is nothing available?
best regards
LaPxWaSs said:
Hello, I recently bought a GT1. I would have liked to switch to Android TV but none of the available roms is compatible with my box, each time it's a brick, forced to flash the basic rom. Looking better, I did not find a compatible ROM with my serial number starting with LPN1. Do you have a track to flash something that works or there is nothing available?
best regards
Click to expand...
Click to collapse
I just flashed https://www.atvxperience.com/download/s912-v2ff-ddr-lpddr-ram-18-oct-2018/ successfully on mine.. Used the s912_LPDDR_atvXperience_v2FF.img file.. So far so good.. Flashed using USB to USB, and USB burning tool 2.1.6.. Android TV 7.1.2.. LPN1 32g/3g ddr4.. Only one I've found so far but was worried about hard brick so waiting till someone else confirmed it
Edit: Well, not sure now.. Seems every app that I've downloaded (Kodi, Chrome, VLC, the usual) minus showbox works fine but a lot of the apps that were originally on there (atvx apps) just crash out.. May have been a bad flash or I'm missing something simple. Will try reflashing later but it definitely doesn't brick it..
Hi, this version is compatible with the serial number LPN1? By reflashing all your applications work
LaPxWaSs said:
Hi, this version is compatible with the serial number LPN1? By reflashing all your applications work
Click to expand...
Click to collapse
It doesn't matter what the serial number is. All that matters is the architecture of the components of the ROM you're installing match up with the architecture of the box you have. In your case, any of the ROMs supporting the Amlogic s912 Octocore chipset should work on a Beehive GT1 Ultimate.
It sounds like a mistake you're making in the flashing process that is bricking your device, not the fault of the actual ROM.
Anyone know where to get Android 9.0 firmware for gt1_313M0 ? Is Android 6.0.1 really the final version of Android for this?!?!
I own the Bqeel 2019 Android 8.1 TV Box Y4 MAX / Amlogic S905X2 Quad Core / 4G DDR4+64G eMMC / Dual WIFI 2.4/5.8G + 100M LAN / tv box Bluetooth 4.0 / USB 3.0/ HDMI 2.1 /4K Smart TV Box .
I have tried many custom roms and none of them seem to work in the correct manner. I am able to use the latest USB burning tool but lot of these custom roms will flop on me after the install process. I feel like there is something usually wrong with the WIFI side. if it is not a wifi problem, then it is the remote control.
I have yet to find a custom rom where I can load and then use the device the way it is suppose to be. I want the remote to work correctly. Keep in mind that I do have a direct Ethernet connection for this device.
I have contacted the original manufacturer hoping that they can send me the original default firmware.
Back to the topic, i am interested in the best, the latest, and the one the works the most for this device. All solutions have failed for me thus far.
ps: i will re try the following .img files that I was able to obtain from FreakTabs
- XTM_ATV_X96_4_4 (this one will not connect to the internet directly. it needs a cell phone or tablet, so i can transfer over the Wifi and Google Account settings. For some reason, this is impossible because it keeps asking for my WIFI password which i have entered many times in the device);
- Poison_S905x2_V2.0 (this one is easy to install but after the install, the GUI seems stuck. I can't open up any apps, and the weather icon is always spinning).
Again, i have tried maybe 5 different custom roms from freaktabs (i am sure they are posted here) and none of them seem to work.
Hello , i have same issue here
i flashed many times with many roms and no one work properly.
Sometimes i have no wifi/ethernet or no remote.
please if someone have the stock firmware of Bqeel y4 max 905x2 4/64go
Post it!!
really sorry for my english
alilous1000rr said:
Hello , i have same issue here
i flashed many times with many roms and no one work properly.
Sometimes i have no wifi/ethernet or no remote.
please if someone have the stock firmware of Bqeel y4 max 905x2 4/64go
Post it!!
really sorry for my english
Click to expand...
Click to collapse
I have the same problem.
I have tried many custom roms but nothing seems to work. Wifi and Bluetooth issues is a problem.
I too need STOCK firmware. I have extra device that is not been messed around with but i do not know how to make back up from stock rom. If i can make stock up rom with one app, i will do it ASAP and perhaps share it.
Edit: So I am able to obtain a back up of the stock firmware via Twrp from my second device, but it is not compatible with the other Bqeel system. All i see is the Bqeel Boot Logo.
I am still able to boot into recovery, and i can also install other custom roms (those custom roms stink).
I still need the orgiinal stock firmware in .img or i need a custom rom that actually works really great.
For those who want to purchase this device, you can but do not mess with custom roms. Just remove default apps and enjoy the default OS.
I contact the seller of my box (bqeel y4 max 4/64go) today
he gonna send me the stock firmware Asap.
I 'll share it when i 'll recieve it.
Thanks
alilous1000rr said:
I contact the seller of my box (bqeel y4 max 4/64go) today
he gonna send me the stock firmware Asap.
I 'll share it when i 'll recieve it.
Thanks
Click to expand...
Click to collapse
I did the same thing. They sent me the stock firmware. the device works great now! there is another hiccup though. For usb burning tool, you will need some license files. when you load the .img file in the program, it will not accept it. You need the license files (just transfer them in the directory in usb burning tool)
here is the link for license files and stock firmware.
https://mega.nz/#F!TvoShAAK!Jd0X15aoHWVdOf1rrYPc0g
I tried that firmware in my box and it freezes on logo!!!
any news for this device? I have tried many custom OS but none work due to missing drivers.
LooseEnd85 said:
I did the same thing. They sent me the stock firmware. the device works great now! there is another
Click to expand...
Click to collapse
What did you actually wrote into the message? I'm in touch with them since a few days but I cannot go over than "we can replace the unit"!
BTW, my Device Build Fingerprints: Amlogic/u211/u211:8.1.0/OPM1.171019.011/20190402:user/release-keys
Bqeel 2019 Android 9.0 TV Box Y4 MAX / Amlogic S905X2 Quad Core / 4G DDR4+64G eMMC / Dual WIFI 2.4/5.8G + 100M LAN / tv box Bluetooth 4.0 / USB 3.0/ HDMI 2.1 /4K UHD Smart TV Box
Yes... it should have android v9 but it's a v8.1... I found the error when the Amazon return window was already closed...
https://www.bqeel.net/download.html
There are firmwares from bqueel
Hi
Can somebody now tell me if firmware from bqeel.net works or not becuse I've seen a loot that say it's stuck at logo screen or it won't boot
Does it work or no?
so far the best custom ATV ported ROM I've found for this box is here: https://forum.freaktab.com/forum/tv...ionatv__bqeel_u214-y8_max_1000m_s905x3-test57
it is due for an update but works as is. I also have a SlimBox ROM that works for the Bqeel but I'll have to upload that to my Mega folder and share the link.
EDIT: nevermind my boxi s the Y8 Max this is asking for the Y4 Max,.