Q&A for HP Slatebook X2 - maya - development thread (recovery,root)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
recover partition table
Hi All,
I was playing with a Slatebook x2 in order to get it rooted however instead I've managed to completely screw it up by changing partition table so that only mode it boots now is the APX. From the nvflash tool i can see options that would allow me to partition device again and upload data, however no mater what i do device hangs. I would be super grateful for any suggestions.
If you can access nvflash, did you try to partition it with information's from beneaths device tree? If you need any info s from a running one, tell me how to export them the way you need it.
Sent from my GT-N7100 using XDA Free mobile app
Great! Android L ? New features ?
Custom Recovery after KingRoot
Hello there,
Does anyone can answer if is it possible to install a custom recovery after the root with KingRoot? If the answer is no, is it possible to flash MayaMod with the stock recovery?
Thanks
All nice!
I was able to flash the Maya Mod perfectly after doing Root with KingRoot 4.5, installing the .img of the listed TWRP recovery (2.8.1) avaiable in the topic, and flashing the MayaMod2.0 zip from the SD card. No need of the cable anymore. I was using stock Android 4.3! Tks for all!
Related
Q&A for iBall andi 3.5 Development
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
I know how u feel
ron.gt said:
Guys ... presently I am having this device.... It is one of the hardest device to get root access... I tried all the methods of GB rooting... but failed... I even tried readback of my phone using SPFT.... just couldn't do it... tried every version of SPFT... got same errors... S_BROM_CMD_STARTCMD_FAIL (2005).
Ultimately all the methods failed. Only thing i had to do..is finding test points (TP).... but I dont want to unscrew my phone...
So preferred to remain unrooted until i get a normal rooting procedure...
All the guys using this phone and also the devs ... plzz share the rooting method of this unrootable MT6575 device...
Click to expand...
Click to collapse
Use "rootgenius" software it took me 4 months to find a software that roots this phone.but no custom recovery is available for this phone
custom recovery for iball andi 3.5kke gingerbread
does anyone know a custom recovery tool for this phone. CWM and TWRP doesnt support my phone
Try to find mtk droid tool.with that tool you can make recovery
Sent from my HM 1SW using XDA Free mobile app
thanks
thanks bro it worked like a charm
Q&A for [CWM] 6.0.3.3 for HP Slate 7
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [CWM] 6.0.3.3 for HP Slate 7. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Worked!
I used: http://forum.xda-developers.com/showthread.php?t=2570936
and got the CWM 6.0.3.3 at : http://h30467.www3.hp.com/t5/Tablets-con-Android-p-ej-HP-Slate-7/CWM-6-0-3-3-para-hp-slate/td-p/461795
thank you so much!
plz help me
I rooted but I install CWM 6.0.3.3 then only is recover 4.1. I dont understand. Plz help me to I can install CWM 6.0.3.3.
Trouble getting stock
Hi guys, before anything, im really sorry if i mispell something i'm from Brasil
So let's begin with my problem, im interested in getting my HP2801 back to original, including the removal of CMW, but i'm really a begginer and i cant get the image of its original recovery to work, so i would like to ask for help.
I've already tried flashfy, but it crashes everytime i've tried, tried using the own CWM, didnt work, even installed the linux mint, to reverse the instalation via linux, the last one didnt work because for some reason linux mint aint listening the hp 2801, but when is in recovery mode, he can se the tablet as a device.
Could anyone help me to
A- Make linux mint "see" the tablet in the adb devices
B- Help me get the tablet on it's original recovery
I really tried for over a week to do this by myself, i don't like to bug people, but i didnt saw another answer.
So please, please somebody help me.
Thanks in advance
My slate 7-2800 the formatted from a pc and is completely dead, no work, nor can enter recovery mode (black screen to access this)
What I can do?
Does enyone know if there's a way of root it/install cwm just with the stock recovery?
My tablet (HP slate 7 4600) is stuck at boot logo
Also, does enyone have a stock rom? Will it work installin it withour root?
Sorry for my english
About Hp slate 6
I found on some forum, but, i can't find any custom Rom or CWM for Hp Slate 6 voicetab. Do you give a helping for this problem? Thank you so much!
Q&A for [TUT] How to Make and Flash CWM RECOVERY on any .MediaTek MTK65xx Device
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [TUT] How to Make and Flash CWM RECOVERY on any .MediaTek MTK65xx Device. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Any ALCATEL OT POP C7 7040E try this ?
Amazing!!!
Thanks now i make a cwm recovery for my mtk device..And port a rom to it...
Thanks for this guide again...
Cwm recovery
Got CWM Recovery in my Karbonn Titanium S 9 successfully through the instructions provided. Thanks a lot for simplifying the technicalities.
I can't follow the steps
I sorta bricked a phone with the MTK6589, so can't boot it up, also I can't access recovery mode because there appears to be none... Is there a way to get the recovery on the device with just Fastboot?
Cubot cwm recovery (ready to flash)
Hi. I have MT6577 device and i would like to ask if the file CUBOT-GT99_130601__recovery_130725-202025.img is compatible with my device (MT6577). I already have TWRP recovery on my phone and would like to change to your ready-to-flash cwm recovery using mobile uncle. Thank you.
Cant do it
i had try this but is not working on my lenova a269i and is not creating the recovery files plz help
Dear sir I need lava iris 820 cwm recovery
Plz help me I tried mtkdroid tool but its showing
No kernelgz
No split bootimage
Task complete
Device:intex aqua speedHD
CPU:mt6582
OS:lollipop(5.0)
Can anyone help how to port custom recovery for this device
Sent from my Aqua Speed HD using XDA-Developers mobile app
Q&A for Root and Custom CWM recovery for VSD220
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Root and Custom CWM recovery for VSD220. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Static IP for ethernet on VSD220
Hi,
Can someone tell me how to configure static ip on the ethernet port of the ViewSonic VSD220 ?
I have no problem to root it if needed.
Thank you.
VSD 220 1.3 Firmware
How did you get past the issue of "I can adb reboot bootloader, and it goes to the black screen, but any fastboot commands, just sits there waiting for device."?
Acer da220hql
Hello community XDA have this monitor Acer DA220HQL in waiting, dark screen and applied VSD220 Viewsonic rooted ROM and anything not walk the monitor achievement do appreciate a tutorial to repair the uboot or rom for this monitor or tutorial for beginners really urges me much no longer count on warranty excuse my bad English
VSD220 rooted img and tools
ftp://custaccess:[email protected]/Documents/Drivers%20and%20Firmware/Smart%20Displays/VSD220%20%26%20221/
vsd220 rom
Hi,
the link to the Rom from viewsonic is not longer existing. Do you habe an other link, or the rom?
Thanks
Successfully Rooted VSD220
I was able to finally root this thing! Found the tools necessary online from Viewsonic. I am on version 1.3.
I have rooted IMG file, may help save a bricked device. Instructions were fairly easy in Windows.
acer Da220hql
Could someone please post a video as to how to root this thing pleeeaaasssee!
Q&A for How to build Recovery mod for Mt6732 /MT6752 64bit
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for How to build Recovery mod for Mt6732 /MT6752 64bit. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
CWM recovery for Cube T7 (MT8752) still not working
hanuma said:
CUBE T7 MT8752(6752)
Download here
Click to expand...
Click to collapse
Thank you for sharing Taiwan101 CWM recovery V6.0.5.1 for Cube T7, hanuma.
I was able to install cwm-recovery and booting to recovery works, but backing up doesn't work: Error message is "E: Can't mount backup path" Same problem backing up to internal or external sdcard. I tried to backup directly with cwm-recovery and with "Rom Manager".
I'm using rooted Rom V1.3 with modified scatter file.
View attachment MT6752_Android_scatter.txt
Does backup via cwm work on your T7?
Recovery for mt6752 - Lenovo a936
Hi guys,
would some twrp or cwm recovery work also on my Lenovo A936? There is some stock recovery loaded on this phone, but in CN language only .
Specs:
android 4.4.4
build vibeui_v2.0_1448_5.2.1_st_a936_cu
hardware version h201
processor mt6752 1.7 GHz
RAM 2 GB
ROM 8 GB
I'm not brave enough to try dirty flash, because there aren't many flashing guides for this phone, yet...
Thanks!
Appeal to the devs
»deleted