Verizon S4 MDK
Background: I was on an MIUI port for the verizon s4, Wanted to flash to Chaos rom 3.0, recovery "Failed out every time, updated TWRP to 2.8.01, flashed Chaos 3.0 ( This rom requires a non stock kernal), Forgot to install Kernal before flashing (partly because i thought I already had one)< rom flashed successfully, rebooted and got a blue screen with pixels all over, rebooted again and the phone sits at a black screen that blinks every 5 seconds and vibrates, can ONLY get to Download mode no recovery.
*tried flashing twrp in ODIN and it fails, even on different Odin versions.
I want to atleast be able to get to recovery again so i can save my internal memory files (pictures mostly), how can i get there?
Trying to use MDK no wipe in ODIN now.
MDK no wipe.tar worked, allowed me to access my files. Thanks for all the help I didnt get! hope this post helps someone down the road
Related
I tried to install CWM recovery by flashing the zip file in TWRP. It seemed to have flashed fine, but I cannot get into recovery now. When I try, the screen "flashes" and "flickers" a few times before going black. I've used odin to install the .tar file that I originally used to root the device and in goes through the process just fine. However, when I pull the battery and try to go into android stock recovery, it does the same thing ("flashes & flickers and then goes black"). When I try to boot the phone as normal (not into recovery) it boot loops between the blue samsung swirl and the verizon 4g logo.
I was on cleanrom 4.7 if that helps at all. I would greatly appreciate anyones assistance concerning this matter.
Edit: Found a .tar file for TWRP and was able to load it through ODIN. Once into TWRP I was able to restore a backup I made earlier today. Thought I would edit the post in case someone ran across the same problem.
Romans8vs1 said:
I tried to install CWM recovery by flashing the zip file in TWRP. It seemed to have flashed fine, but I cannot get into recovery now. When I try, the screen "flashes" and "flickers" a few times before going black. I've used odin to install the .tar file that I originally used to root the device and in goes through the process just fine. However, when I pull the battery and try to go into android stock recovery, it does the same thing ("flashes & flickers and then goes black"). When I try to boot the phone as normal (not into recovery) it boot loops between the blue samsung swirl and the verizon 4g logo.
I was on cleanrom 4.7 if that helps at all. I would greatly appreciate anyones assistance concerning this matter.
Edit: Found a .tar file for TWRP and was able to load it through ODIN. Once into TWRP I was able to restore a backup I made earlier today. Thought I would edit the post in case someone ran across the same problem.
Click to expand...
Click to collapse
My first time through a bootloop I ran into the same issue and had the same fix.
Hi everyone
My sister updated her MEGA OTA last month. She cant remember which version she was on. I am assuming it was 4.3. shes doesnt know much,
Her phone got stuck in bootloop.
Initially a got a hard time even getting into restore mode. however after a lot of goggling and trials and errors here is where i am today :
1- I can install TWRP and/or Philz recovery and boot into them.
2- I can enter download mode
3- I have tried installing many ROMS and different versions. I was only partially successful with 4.4 versions because I get a passed message in Odin however upon restart the phone enters boot loop again.
4- I have tried multiple wipe data/dalvik cache/cache and restoring factory settings but i still get the same results.
5- Only in Philz recovery i can mount the external SD card and copy zip files. I was able to root the phone that was (but im not sure if it still is). However all ROMs zip files I tried to install (both from PC and from extSD card) wouldnt open in recovery mode.
Because I get a passed message when I install a ROM from Odin , I dont know what the issue could be. But there is something wrong that happens as soon as this phone boots up.
I seriously do not know what to do anymore. I just need this phone to be working again. At this point I dont care about warranties/ROM versions/stock or custom...
Please help and sorry for my bad English
It sounds like you need to download the stock rom and flash it in Odin (you gotta put the phone in download mode to flash in Odin). The stock rom can be found on the sammobile website in the firmware section. That should get you back to square one (stock rom, stock recovery, no root). Then you start over from scratch.
Sent from my SGH-M819N using XDA Free mobile app
Thanks
I did and I still get the same problem.
In fact after installing stock rom, i could not enter "stock" so I installed philz recovery, logged in philz and wiped cache a couple of time, did a factory reset.
and yet when i restart , the phone is stuck in bootloop.
Maybe she has a Galaxy Mega with a repaired screen. Starting with 4.4 Samsung only supports a digitizer with Synaptics brand chip. It's a big mess and there are countless screens and digitizers made worthless. I think unofficial 4.4 by Cyanogen and others might work, but not official Samsung. With some Galaxy Megas you get a bootloop. With others it boots however the digitizer and touch functions no longer work. I don't know how to go back after you are on official 4.4 because last I saw, there was no root for it. If I'm wrong, someone else please clarify and continue to help.
IMHO only one way out from such situation is try to flash MegaFire MJ2 which is derived from stock 4.2. It's only one 4.2 ROM which can be safely flashed onto KK.
Iformation about MegaFire you can find HERE
im on stock root and i wanted to hopefully flash a rom, but first i needed a custom recovery. On my phone, i downloaded Rom manager and it asked me to install cwm. it found my device and it downloaded and said installed successfully. i rebooted into recovery and from there it loops and boots into recovery non stop. i remove the battery and put it back in and it still tries to boot into recovery with the loop. (Semi-fix) when i remove my battery and boot into download mode. i can cancel it and it will skip trying to boot into recovery and load just fine. i can then shut down or restart as needed. but booting back into recovery will start the issue over again. i just want to know a safe way to have cwm on my note 3, or how to revert it back to normal. any help please?
scarface195894 said:
im on stock root and i wanted to hopefully flash a rom, but first i needed a custom recovery. On my phone, i downloaded Rom manager and it asked me to install cwm. it found my device and it downloaded and said installed successfully. i rebooted into recovery and from there it loops and boots into recovery non stop. i remove the battery and put it back in and it still tries to boot into recovery with the loop. (Semi-fix) when i remove my battery and boot into download mode. i can cancel it and it will skip trying to boot into recovery and load just fine. i can then shut down or restart as needed. but booting back into recovery will start the issue over again. i just want to know a safe way to have cwm on my note 3, or how to revert it back to normal. any help please?
Click to expand...
Click to collapse
Pull battery let it sit for two minutes. Push menu button, volume down button, and power button at the same time boot into download mode. once there flash a fresh copy of your OS which ever version of KitKat your running. You lose all your personal data, but your beyond that now. Then here is link to my thread should answer all your questions http://forum.xda-developers.com/note-3-sprint/general/samsung-note-3-rom-flashin-basics-t2896440 enjoy !!!
uknow said:
Yeah ive said it a few times this should not be used
If youve bricked your phone you can get back into your phone by holding volume down menu botton and power botton at the same time when it pops up the warning screen to enter download mode hit cancel your phone will then boot up after your phone is on if you do not have a computer the way you fix the phone so you dont have to do this every time your phone is off you need mobile odin and a kitkat cwm.img.tar for our phone flash it and problem solved you can now boot into cwm recovery then if you want you can flash a twrp img zip through cwm or just keep cwm hope this helps
Ps if you Google mobile odin the dev gives it away on his xda mobile odin page
Click to expand...
Click to collapse
.............^^^^^^...........
stuck in recovery loop also
hi i am new to all this..i managed to get my sprint note 3 4.4.4 NK4 rooted and i read that i also needed a custom recovery so i used odin to install "philz_touch_6.08.7-hltespr.tar.md5" and it said success but when i tried to get into it it just says recovery is not seandroid enforcing i also used rom manager to get into it automatically but it just keeps looping saying same thing. is there a way out of this mess?
update-- i found an updated version of the philz tar file and installed it with odin and that got me out of the loop..just havent tried to get back into recovery yet...lol
Cat1970 said:
hi i am new to all this..i managed to get my sprint note 3 4.4.4 NK4 rooted and i read that i also needed a custom recovery so i used odin to install "philz_touch_6.08.7-hltespr.tar.md5" and it said success but when i tried to get into it it just says recovery is not seandroid enforcing i also used rom manager to get into it automatically but it just keeps looping saying same thing. is there a way out of this mess?
Click to expand...
Click to collapse
First, pull the battery for a minute then reinstall hold the power, menu, and volume down buttons at the same time and boot into download mode. The version of Phil'z CWM you flashed is to old for 4.4.4 NK4. Now download to your desktop the right Philz CWM recovery file (Phil'z_Touch_6.48.4-hlte.tar.md5 ) here is the link https://goo.im/devs/philz_touch/CWM_Advanced_Edition/hlte/ there are two listed use the second one. Flash with odin and you should be good to go. Go to my thread http://forum.xda-developers.com/note-3-sprint/general/samsung-note-3-rom-flashin-basics-t2896440 for more info.
done exactly as you said and the same screen came up saying recovery is not seandroid enforcing and then it jumps to Philz Touch 6 so im assuming everything is right now...i really appreciate the help! tyvm
different rom
ok..i installed cyanogen rom..i also used titanium backup..i want to go back to where i was but i dont see titanium backup on there anymore..how do i revert back?
i guess i need to update my phone n900p (help)
my rooted note 3 was running 5.0 L so i tried flashing a custom recovery both TWR and CWM now its stuck in boot loop. i read all the post showing you how to get out the bootloop. how ever i still need to put a recovery on my phone are there any updated links for this with odin because i was using the odin 3.0 sorry odin 307
Well here's the story..... So I want to install a custom ROM via SS, the install goes without issue. (I'm running stock NK1 Rooted at the time) I go to install a ROM , and It fails, so I go to reboot the device, and Its back into a bootloop. No big deal, iv'e delt with this before... .I attempt to flash it back to stock NC5 to root it and start over, the flash succeeds, but when I try to boot it i just get the "Samsung Galaxy S4" logo and it sits there doing nothing, and I cant boot into recovery for some reason, just goes back to ODIN mode. Is there anything that can be done?
Alex_Tisler said:
Well here's the story..... So I want to install a custom ROM via SS, the install goes without issue. (I'm running stock NK1 Rooted at the time) I go to install a ROM , and It fails, so I go to reboot the device, and Its back into a bootloop. No big deal, iv'e delt with this before... .I attempt to flash it back to stock NC5 to root it and start over, the flash succeeds, but when I try to boot it i just get the "Samsung Galaxy S4" logo and it sits there doing nothing, and I cant boot into recovery for some reason, just goes back to ODIN mode. Is there anything that can be done?
Click to expand...
Click to collapse
Try a reflash via Odin. It may help. Which image are you flashing?
Sent from the gap between universes.
Hello everyone,
I own a samsung galaxy s2 gt-i9100 I've been using it for a long time. A few days ago i installed cynogenmod 13 marshmallow on it but faced some severe issues like dialler problems,battery drain,google play services not working. So, i switched it back to my previous rom i.e. cm 12.1 lollipop but my old twrp recovery got replaced by cynogenmod default recovery. Now some people who may have used it know that its very basic and does not has backup,restore, has bugs,does not flashes some zips or files that i wanted so i tried to replace it with twrp/cwm through rashr,flashify,rom manager,etc. But none of it worked, whenever I'd boot after flashing the twrp/cwm recovery it'll go back to the default cynogenmod recovery. Now, me not knowing what im doing stupidly downloaded mobile odin lite app then i downloaded the cwm kernel recovery kitkat compatible and installed via mobile odin lite. After that it got screwed, it won't just startup it'll just start and go into recovery i mean continuously! It was annoying, then i read an article on a forum to download any cm nightly or stable mod and flash it but i did a little bit of tweak of removing the recovery boot img file with twrp to get preinstalled twrp recovery but i gotta admit it was the last mistake possible. Now i sit here, with a bricked phone in my hand which is looping continuously only on the samsung logo. If anyone out there can assist me correctly it'll be a life saver for me. Thanks for reading this and please reply with a solution asap. Please! Im in danger!
can you get into download mode?
if yes you can download a stock firmware and flash but you will have to hope it will work, otherwise you will get stuck on nand write start which means the nand is stuffed/corrupted and then basically only a motherboard replacement will do the job, or you can try using another computer, reinstall usb drivers..
can you get into recovery mode?
if you can, you can flash a rom
The 'nand stuffed' assumption is a last resort, tried everything and nothing works assumption. There is *plenty* to try before assuming that the nand is 'stuffed'......
It sounds like (from your description) that you may have rendered recovery useless and inaccessible.
I've a feeling what you need to do is to go into download mode and Odin flash a firmware.
Even if it doesn't boot, you should have a recovery that you can flash PhilZ recovery from and then use that to flash a custom rom. Initially, I'd stay away from the MM builds and instead flash something KK or LP based as they're less 'volatile' and have a higher degree of stability than the MM roms.
http://i.imgur.com/rVnFwJM.jpg