Just wondering if anyone has had experience using something like this on their Z3/Z3C or other phone? Looks like it would work ok and much cheaper than the Sony one (and available now).
I can't really justify paying ~$50 for the Sony one as that's money that could go towards another game
Link
wont the suction cups on the holder tend to be tight? my wry is that constant removal n usage will cause the back glass to come out
anirudhks said:
wont the suction cups on the holder tend to be tight? my wry is that constant removal n usage will cause the back glass to come out
Click to expand...
Click to collapse
I dont think the back will come off that easily as it will be glued together strong enough to make the phone waterproof
http://www.amazon.com/Nyko-Smart-Clip-PlayStation-4/dp/B00FLLFGO8
I have this one and it works pretty well.
dereffy use
How does the remote play work? If using the PS4 controller while mounting the Z3 on there, wouldn't that be uncomfortably heavy over long sessions?
The support for remote play isn't even here yet.... Bleh. Nyko makes a good controller clip for the phone.
I've had the Nyko one since Feb (txting during games). Works great.
there is a store on amazon selling the nyko one brand new for $12.95 shipped. I hopped on the deal and so did my friend. Have not gotten it yet so can't yet confirm 100% on its legitimacy. seller seems reputable however.
Nyko 83201 Smart clip
julz said:
Just wondering if anyone has had experience using something like this on their Z3/Z3C or other phone? Looks like it would work ok and much cheaper than the Sony one (and available now).
I can't really justify paying ~$50 for the Sony one as that's money that could go towards another game
Link
Click to expand...
Click to collapse
Just noticed that the clip you've shown is for the PS3 controller. I don't think it would fit round a Dualshock 4.
I can also confirm that the Nyko clip is great and works quite well.
cheapest Nyko clip for PS4 I can find is $18.50 here
It does look good though and possibly a better hold for the Z3
The clamp cups the device quite well. It holds it perfectly.
310
Looks good. 1 question though: it seems that the clamps are right around the power button and volume rocker. Doesn't it interfere with them?
I don't have any issues with it interfering with the buttons. The pressure of the mechanism isn't all that strong, it really just holds the lips down around the edges of the device. Like I said it works well and I've used it with a note3 and a ps vita with no issues. The vita was a bit fat for the clamp but it worked okay.
http://www.ebay.co.uk/itm/like/2912...3=1&ff11=ICEP3.0.0-L&ff12=67&ff13=80&ff14=108
Cheap one for you Americans.
Anyone know if these are avaliable in the UK? The postage works out at £30+ so this is not really viable.
EDIT: http://m.ebay.co.uk/itm/351211776498?nav=SEARCH
Works out at £15.51 delivered to NI but delivery is estimated between 8th and 18th of November. Do we have any idea when the GCM10 is expected to launch?
I think this clip might actually work better though, don't like the look of the suction cup on the official one.
It looks ugly as hell, but if it works and it's cheap.. why not?
Related
Someone is finally making a car cradle for the Touch Pro 2 that Verizon and Sprint (Not T-Mobile) should be able to use and its cheap. I emailed the U.S. seller and he said it fits though it is really for the GSM Euro versions. No surprise though as it is passive only. Heres a link to their website: http://www.buygpsnow.com/HAiCOM_Car_Mount_HTC_Touch_Pro2.aspx
Anything is better than a squeeze cradle
I have one ordered so will update a review but at $12.95 and $2.50 shipping kinda hard to go wrong even if it only lasts until Proclip gets off their duffs.
I found a coupon code for free shipping. It is hit or miss apparently but worth a try. Code is 430.
Edit: Code did not work
REVIEW IS ON POST #9
nice find. please let us know how it works. i have a vzw tp2 as well and have been searching for a car holder. right now it sets on my passanger seat...
Just a quick question, why do you think squeeze cradles suck?
I've not had one but was considering a universal mount from Arkon, which is a squeeze cradle.
YodaJM said:
Just a quick question, why do you think squeeze cradles suck?
I've not had one but was considering a universal mount from Arkon, which is a squeeze cradle.
Click to expand...
Click to collapse
Its been years since I've seen a phone thick enough that the jaws need to be anywhere near as deep as the vast majority of the squeeze cradles on the market yet they still make them that deep, at least the ones that are big enough to hold a PDA. This would not be much of a problem except they use soft foam in the jaws that is almost invariably also very thick. When you squeeze it tight enough to keep the phone from falling out, it has a tendency to roll the foam right down over the screen making it difficult to use things like the slide tray in Touchflo 3D. It is also difficult to remove the phone as after a short while the teeth of the jaw start wearing down and it sticks closed making the button hard to push. And thats with a good cradle like and Arkon, which is what I have been using. Lesser quality cradles are even worse. There are better squeeze cradles that address these issues but they are all for Iphones. Saw a nice one the other day with nice thin jaws and rubber grips that fit the phone perfectly with a friction lock instead of teeth and a cam but it had and Ipod cable and FM transmitter built in making it very expensive at like $69. Looked real nice too with a nice shiny finish like the phone has but at that price, wasn't going to buy something that I had to cut up to use. To bad the company did not make one with a USB cable instead. Unfortunately most of the good stuff is made by companies that drank large quantities of the Steve Jobs kool-aid years ago.
Techitrucker said:
Its been years since I've seen a phone thick enough that the jaws need to be anywhere near as deep as the vast majority of the squeeze cradles on the market yet they still make them that deep, at least the ones that are big enough to hold a PDA. This would not be much of a problem except they use soft foam in the jaws that is almost invariably also very thick. When you squeeze it tight enough to keep the phone from falling out, it has a tendency to roll the foam right down over the screen making it difficult to use things like the slide tray in Touchflo 3D. It is also difficult to remove the phone as after a short while the teeth of the jaw start wearing down and it sticks closed making the button hard to push. And thats with a good cradle like and Arkon, which is what I have been using. Lesser quality cradles are even worse. There are better squeeze cradles that address these issues but they are all for Iphones. Saw a nice one the other day with nice thin jaws and rubber grips that fit the phone perfectly with a friction lock instead of teeth and a cam but it had and Ipod cable and FM transmitter built in making it very expensive at like $69. Looked real nice too with a nice shiny finish like the phone has but at that price, wasn't going to buy something that I had to cut up to use. To bad the company did not make one with a USB cable instead. Unfortunately most of the good stuff is made by companies that drank large quantities of the Steve Jobs kool-aid years ago.
Click to expand...
Click to collapse
Thanks for the response, very good reasons not to go with a giant squeeze cradle.
I've been looking at this mount http://www.arkon.com/phonemount.php
Curious if anyone else has used it with the TP2.
My phone works splendidly with a $15 squeeze cradle from Walmart. It's not too thick, secure, and does not obscure the screen.
I have an old Treo 650 Pro-clip mount that works perfectly with the TP2. The phone slides in securely and comes out easily. Obviously no active connection but it works great. I put double sided tape in the back of the of the mount and it holds my Fuze perfectly as well.
yo Techitrucker,
you ever get that car cradle. i am really thinkin bout getting one, but would like to hear some first hand experience with it, especially since we both got vzw
MrGoodCat said:
yo Techitrucker,
you ever get that car cradle. i am really thinkin bout getting one, but would like to hear some first hand experience with it, especially since we both got vzw
Click to expand...
Click to collapse
Just came in the mail on Saturday. The cheap shipping took one week to the day. Quality of the cradle is very good. The clip at the top is actually spring loaded, not just plastic that bends back, like the Seidio holsters. It is removable if you won't need to use the cradle in landscape to make it easier to take in and out. The cut out at the bottom is definitely for the CDMA phones. It should work with the European versions also. THIS CRADLE WILL NOT WORK ON THE T-MOBILE VERSION AT ALL. It is a perfect fit for my Verizon phone. This is not a cradle you want if you need to use the keyboard while it is in. For me that is not and issue and it makes me uncomfortable having plastic wedged between my keyboard and screen anyways. Seems like it would be hard on the slider. The windshield mount is very nice. It has push button friction locks instead of screws for the joints and the rotation is spring loaded so its easy to rotate when needed one handed. The suction cup is very large and has a good positive locking mechanism. It is larger than the average suction cup so if you need a dash disk like I do, you will need the largest one you can find. Unfortunately it does not come with one. Since they are selling this so inexpensively, that probably a place they needed to cut their losses. The quality of the cradle is much higher than the price. The cradle does not use a standard mechanism to join it to the mount so you will either have to use the one it came with or go to the website and see if they have another kind of mounting solution. This is really the only limitation I can find. You will not be able to use it with your Proclip solution if you have one. Any more questions you have, just leave them in this forum.
thanks man sounds sweet. yeah i am just lookin for something to just hold my phone in the car, and this sounds great. thanks for takin the time to review. i am only a couple hours from the websites store, hope it doesn't take a week, hah. buyin one right now.
whats this proclip you are talkin about? i am new to the ppc phone genre. are they really that superior? what would you say makes em better than this cradle you just got? just curious, like hearing first hand experiences, thanks
treo...not! said:
My phone works splendidly with a $15 squeeze cradle from Walmart. It's not too thick, secure, and does not obscure the screen.
Click to expand...
Click to collapse
Hi:
What department did you find it in? I have searched by where the cell phone cases are, and can't find a thing.
Thanks!
cincy1020 said:
Hi:
What department did you find it in? I have searched by where the cell phone cases are, and can't find a thing.
Thanks!
Click to expand...
Click to collapse
check automotive section
MrGoodCat said:
thanks man sounds sweet. yeah i am just lookin for something to just hold my phone in the car, and this sounds great. thanks for takin the time to review. i am only a couple hours from the websites store, hope it doesn't take a week, hah. buyin one right now.
whats this proclip you are talkin about? i am new to the ppc phone genre. are they really that superior? what would you say makes em better than this cradle you just got? just curious, like hearing first hand experiences, thanks
Click to expand...
Click to collapse
I had one for my Touch Pro and it was nice enough but it kind of made the gap between the keyboard and phone wider over time. If you absolutely have to have the keyboard open while driving its probably the best on on the market, though to me that keyboard open is just and invitation to disaster. Its hard enough to keep hands off the phone while closed They are not inexpensive by any means. Depending on how you need to configure it you can easily spend well over a $100 bucks. The powered cradle alone without a car specific mount is $60 which is competitive with other powered solutions, but the non powered ones at $40 bucks seem more than a little like highway robbery to me especially since you will still spend $30+ on the mounting solution for the cradle. Still, if you need that keyboard open its the only decent solution at this time. They have no powered option for Verizon yet, but the non powered one they have listed for the AT&T Tilt 2 will work on Verizon and Sprint. The phones are exactly the same shape as the AT&T phone except for the ports on the bottom. If you want a fitted cradle but don't need the keyboard to open while mounted, this is the posted cradle only real solution I've found, but its inexpensive and good quality.
Now if you want the best of both worlds, I was wrong about the Proclip mounts not working with the cradle. They make absolutely the best mounting solution hands down since there is no damage to the vehicle. They have cradle adapters on the site that will make it work and the price is not to bad.
http://www.proclipusa.com/?sectionp...egoryid=&p_year=&p_countryid=0&p_leftorright=
The suction cup on the cradle is 3.25 inches and this adapter is 3.5 inches so it should work.
I'm not a fan of clamp holders or suction cups, had enough of unintentional flying objects. I usually make my own holders that slip into a vent clip from theclip.com
http://theclip.com/store/Ultra-Clip-with-Vent-Mount-p-16176.html
This time I found a perfect custom made touchpro2 holder for $1.35! It clips right into the vent clip with just a little grinding on the vent clip. It holds the phone solidly and perfectly positioned for easy phone use and GPS mapping.
http://www.cellphoneshop.net/pro2holster.html
Nice find
RemE said:
I'm not a fan of clamp holders or suction cups, had enough of unintentional flying objects. I usually make my own holders that slip into a vent clip from theclip.com
http://theclip.com/store/Ultra-Clip-with-Vent-Mount-p-16176.html
This time I found a perfect custom made touchpro2 holder for $1.35! It clips right into the vent clip with just a little grinding on the vent clip. It holds the phone solidly and perfectly positioned for easy phone use and GPS mapping.
http://www.cellphoneshop.net/pro2holster.html
Click to expand...
Click to collapse
Nice find on the holster. Never had a problem myself with a good suction cup holder and nothing bounces like a Freightliner. I find that taping a small vanity mirror to the dash works much better than those little round plastic disks since they where designed to stick to glass. If you have two phones and two holders like I do, the small rectangular one they sell in the automotive department at Walmart will hold both and its only 2 bucks and looks nice. I am not a fan of any kind of vent clip. The two worst enemies of electronics are heat and cold and something as heavy as a PDA is going to break the vent eventually. What I have done in the past is use something like this: http://theclip.com/store/The-Clip-Mount-p-16156.html with a holster or case.
I'm going to get the holster. Been looking for one that faces out like that.
I already have a clip in the car so won't need to take my mount with me when I get off the road.
Techitrucker said:
Never had a problem myself with a good suction cup holder and nothing bounces like a Freightliner. .... If you have two phones and two holders like I do......
Click to expand...
Click to collapse
Driving a semi, using not one cell phone, but two???
You're probably a great driver. But I'm glad there are several states between you and I.
Techitrucker said:
Someone is finally making a car cradle for the Touch Pro 2 that Verizon and Sprint (Not T-Mobile) should be able to use and its cheap. I emailed the U.S. seller and he said it fits though it is really for the GSM Euro versions. No surprise though as it is passive only. Heres a link to their website: http://www.buygpsnow.com/HAiCOM_Car_Mount_HTC_Touch_Pro2.aspx
Anything is better than a squeeze cradle
I have one ordered so will update a review but at $12.95 and $2.50 shipping kinda hard to go wrong even if it only lasts until Proclip gets off their duffs.
I found a coupon code for free shipping. It is hit or miss apparently but worth a try. Code is 430.
Edit: Code did not work
REVIEW IS ON POST #9
Click to expand...
Click to collapse
tons of this stuff on ebay - pick a random one at 10-12 bucks with free shipping and if it doesnt work out too great its no big loss
Anyone know if this will work for the Tilt 2??
http://cgi.ebay.co.uk/ws/eBayISAPI....5&ssPageName=ADME:X:RTQ:GB:1123#ht_4013wt_939
Thats exactly what im looking for but thats the only thing that comes close. I want a sturdy vent mount that can rotate to landscape mode
BRODIT or PROCLIP here in the USA. They have been on the market for about 100 years. at least :-D
They make active, passive, ... versions of their mounts. For almost all available mobile devices. Great quality.
www.brodit.se
www.proclipusa.com
http://www.proclipusa.com/default.a...egory=4&device_brand=16708&device_model=17907
NOT TRUE.
Just spoke with porclip.
The t-mobile version has not been developed and they do not expect it to be manufactured soon.
mpr_ger said:
BRODIT or PROCLIP here in the USA. They have been on the market for about 100 years. at least :-D
They make active, passive, ... versions of their mounts. For almost all available mobile devices. Great quality.
www.brodit.se
www.proclipusa.com
http://www.proclipusa.com/default.a...egory=4&device_brand=16708&device_model=17907
Click to expand...
Click to collapse
hello guys! As I go through my research on getting a case that is just meant for my g-tab, finally after a long browsing and searching, it is already available in Amazon! (mostly good for U.S. consumers)
Attached are the pics which I uploaded for you guys to see. Also, it looks like it just came out so there's no reviews yet or maybe I'll be the first one who will write the review!
Will give this a try in Amazon.
http://www.amazon.com/Viewsonic-G-t...1O/ref=sr_1_12?ie=UTF8&qid=1296174001&sr=8-12
Oh man, just days after I placed my order on the sloooowwww boat from China (on the other hand it gives me something to look forward to next month besides more snow).
anjenaire said:
Oh man, just days after I placed my order on the sloooowwww boat from China (on the other hand it gives me something to look forward to next month besides more snow).
Click to expand...
Click to collapse
LOL! I hate that snow! See that's the thing, I am a bit skeptical doing online purchases outside US... not that I don't trust them but might as well wait till it's available in US market, plus on top of that is you can track them but I hope u'll get yours on time! Give an update if it works well on you.
winkzone said:
hello guys! As I go through my research on getting a case that is just meant for my g-tab, finally after a long browsing and searching, it is already available in Amazon! (mostly good for U.S. consumers)
Attached are the pics which I uploaded for you guys to see. Also, it looks like it just came out so there's no reviews yet or maybe I'll be the first one who will write the review!
Will give this a try in Amazon.
http://www.amazon.com/Viewsonic-G-t...1O/ref=sr_1_12?ie=UTF8&qid=1296174001&sr=8-12
Click to expand...
Click to collapse
Purchase two from China back in December. Works perfectly.
How well does this hold the GTab? Has it ever fallen out on you?
winkzone said:
LOL! I hate that snow! See that's the thing, I am a bit skeptical doing online purchases outside US... not that I don't trust them but might as well wait till it's available in US market, plus on top of that is you can track them but I hope u'll get yours on time! Give an update if it works well on you.
Click to expand...
Click to collapse
Funny they are apparently relocating the tab just like everyone has been doing here. So you pay $10 extra to get someone to mess up with your brand new case with an exacto knife and hot glue
Hope they pre-modded some in advance and you guy don't need to wait for them to get it all the way from china do the mod and then pass it your way.
thats true...at least if I'm not satisfied I can return it easily to Amazon.
I also got the skinomi skin protector so if this case will scratch my screen,I'll be able to tell. I also hope it will hold the tablet well enough.
rapcon said:
Purchase two from China back in December. Works perfectly.
Click to expand...
Click to collapse
Did it get any scratches in ur screen? Does it holds the tab ok?
Thanks for the heads-up on this. I thought about ordering one from ebay, but Amazon is so much easier to deal with, and Florida is soooo much closer than China!
Any have any experiences working the keyboard on this case?
Wenger case
Bought a protective soft carrying case at Best Buy that fits perfectly - it's a Wenger (has the red cross logo). Just took my G Tab in and experimented till I found the right fit. http://www.wengerna.com/search/results.php
Great for travel, but sounds like the Amazon deal may be better.
Purchased the one on Amazon. Ordered Friday and received Monday. Works as advertised. Tab moved from blocking USB. Patch looks great and well done. USB cable more than long enough. This is a WINNER!!!
jaycard said:
Any have any experiences working the keyboard on this case?
Click to expand...
Click to collapse
I got mine today, tested the keyboard and works fine. Give it a try
GSBJackson said:
Purchased the one on Amazon. Ordered Friday and received Monday. Works as advertised. Tab moved from blocking USB. Patch looks great and well done. USB cable more than long enough. This is a WINNER!!!
Click to expand...
Click to collapse
I got mine today, keyboard works okay. Now I can be more productive typing on my G-tab... wish it comes with a mouse though but either way I'm satisfied, the price is okay for this case with a keyboard, USB and a stick.
bobsled117 said:
How well does this hold the GTab? Has it ever fallen out on you?
Click to expand...
Click to collapse
This case holds the G-tab well. It has the magnetic snap so it won't fall on you. Got mine today, Im satisified with it. Keyboard works too.
here's a quick review i wrote up for androidforums.
-nice material, well made
-keyboard works flawlessly with VEGAn (i didn't even get a prompt, just plug and play)
-keyboard functions will run android commands (i.e. windows button = android menu button)
-stand holds it at a great angle for viewing (this is a must, especially with our screens)
-does not cover any accessory ports (micro/mini USB, headphones, charger) or buttons (power, volume, etc.)
-DOES cover part of left side speaker and all of right side speaker (although you can still hear them)
-no plastic bracket to hold top of tablet (uses the magnetic closing strap to keep it in while upside down which concerns me slightly, although the magnet is fairly strong)
-included stylus does not work (duh)
all in all, i would certainly recommend this case. i am pretty sure that the only comparable ones out for the g-tab right now are $10-15 more than i paid through amazon, do not include a keyboard, and ship from China.
i have much better pics than the ones on Amazon, but i can't post them yet. [email protected] newbie mode!
Case Update
winkzone said:
LOL! I hate that snow! See that's the thing, I am a bit skeptical doing online purchases outside US... not that I don't trust them but might as well wait till it's available in US market, plus on top of that is you can track them but I hope u'll get yours on time! Give an update if it works well on you.
Click to expand...
Click to collapse
Received it today! (17th of January to the 2nd) Looks good, keyboard works, modified for the Gtablet (http://witglobal.com/goods-2286-10i...for+Viewsonic+Gtablet+10+-+Free+Shipping.html) so the tablet slides into case from right to left. The left support covers the mini-USB but the USB port is available. Keypad works fine. Case sits a little too upright but I can deal. For $25 delivered it works pretty well. i also received my suction cup holder (http://witglobal.com/goods-2005-Car...nic+Gtablet+10+Car+holder+-Free+Shipping.html) and it is a little less impressive. Currently suctioned to my desk. The arms cradle the unit securely but stick out about 1 inch beyond the face. I will probably put a little velcro to secure it a little better. Not overly happy about the fit but for $20 I might be able to modify it to work. It does swivel nicely which helps for viewing angles.
These along with the dock I received, I think I have all the accessories with the exception of an HDMI cable.
anjenaire said:
Received it today! (17th of January to the 2nd) Looks good, keyboard works, modified for the Gtablet (witglobal) so the tablet slides into case from right to left. The left support covers the mini-USB but the USB port is available. Keypad works fine.
Click to expand...
Click to collapse
So this is the same case from witglobal but $10 more?
correct me if I am wrong but the case witglobal looks to good to go with no modding needed now right?
Thanks for the help
These along with the dock I received, I think I have all the accessories with the exception of an HDMI cable.
Amazon case
Looks really good, BUT Amazon now says on-order, unknown when back in stock. I am very new to the gtab and still using as it came from the box, a little afraid to try and do to much to it. May just wait for honeycomb.
For those not wanting to shell out the money on the keyboard dock, this is a nice solution to stand the transformer up at your desk, and rather inexpensive (typically under $15)
http://www.amazon.com/dp/B000CKVOOY/?tag=tipsontech-20
I have one of these. It works really well.
Ron
+1 I also have one & it works great.
Was planning on making one myself but this isn't a bad price.
Would be nice to have it sitting in the kitchen for a quick stand to play videos/music etc while cooking.
Mine got delivered today, really nice stand for the price.
It sits nicely and it’s easy to use with it in the stand on my desk as the feet have rubber under them to stop it sliding backwards when you use it
bobcatuk said:
Mine got delivered today, really nice stand for the price.
It sits nicely and it’s easy to use with it in the stand on my desk as the feet have rubber under them to stop it sliding backwards when you use it
Click to expand...
Click to collapse
bobcatuk, Where did you order it from in UK?
http://www.amazon.com/Fellowes-Study-Inches-Silver-10024/dp/B00006B8HT
Fellowes Sturdy Stand for ~$5 shipped
Used it with my ipad (which is now sold to some ebayer).
Can't wait for my Transformer to arrive, i'm sure it will work just as well with it.
I have one and use it with an IPad and a NC. Very nice. It folds up very small.
aroec said:
bobcatuk, Where did you order it from in UK?
Click to expand...
Click to collapse
£11.75 from eBay - http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=250792133691&ssPageName=STRK:MEWNX:IT
I guys, just wanted to share, I bought the Moko Leather Case with Stand off Amazon and it works like a charm! Perfect fit, good quality, all ports accessible, and very protectable. I payed $19.99 plus $3.99 for next day shipping (Amazon Prime Member). I would recomend this to anyone in a look for a good looking, cheap, good quality folding case.
Srry it wont let me post the link since im new, just shearch 'sony tablet s moko' in Amazon's shearch box.
I did the search ...
but it looks like that the case is not available on German amazon store.
When I search on Google, I get a link of amazon.com an can see the photos.
Thanks for advice.
ohh damm! its really nice and cheap!
Looks good
android_lover69 said:
I guys, just wanted to share, I bought the Moko Leather Case with Stand off Amazon and it works like a charm! Perfect fit, good quality, all ports accessible, and very protectable. I payed $19.99 plus $3.99 for next day shipping (Amazon Prime Member). I would recomend this to anyone in a look for a good looking, cheap, good quality folding case.
Srry it wont let me post the link since im new, just shearch 'sony tablet s moko' in Amazon's shearch box.
Click to expand...
Click to collapse
Looks good, but I just don't like that style.
Enjoy.
Its more of a profecional look, the Sony S and that cover for me its like, beaty & a touch of a profecional look, just awesooome!
A few reviews claim their or port is covered and others are hard to get to. Did you find this to be true?
Sent from my Sony Tablet S
Its NOT true! I have access to ALL ports, even speakers, sd card, charger, headphone jack, etc. See the pictures so you can see...
android_lover69 said:
Its NOT true! I have access to ALL ports, even speakers, sd card, charger, headphone jack, etc. See the pictures so you can see...
Click to expand...
Click to collapse
what about the infrared port? Does the Universal Remote app work well when it's in the case?
I just got the RooCASE and I'm pretty dissatisfied. Returning it for either this case or the Navitech.
Mmmm... its works but not that far away like it would do without it.... but its really nice cover.
No it does not. I am thinking about cutting a larger hole than the pin hole that comes with the case. Will let you know if it work then. For now I have to keep taking it out the case to use the Remote function. The remote app works great! Will be trying it on my AC this weekend.
Moko
THe MoKo case is great. I have taken it around to a few business meetings, it looks professional, duals as a stand and fits the Tablet S perfect. The remote sensor is blocked working on pinpointing it so i can increase the hole size but over all 10/10 on this case after going trying a few of them. The Amazon Prime shipping Rocks, Also Blue Mall on Amazon has a screen protector that fits perfect for 4 bucks shipped.
Any pictures?
aaroncev said:
Any pictures?
Click to expand...
Click to collapse
Here's a link to the product with pictures http://www.amazon.com/MoKo-Folding-Cover-SGPT111US-Tablet/dp/B005PCK5K8/ref=sr_1_1?ie=UTF8&qid=1331006099&sr=8-1.
I got this case for my Tablet. It fits real nice and provides great coverage. All the ports are accessible including charging, headphone, etc.
Also, this is one of the very few cases you will see that positions the tablet correctly in the lowered position. If you look at pictures of other cases, you will see the camera is at the bottom... which doesn't work out too well. I've heard there is software you can get that allows the screen to rotate correctly, but the camera is still at the bottom.
The only negative I had so far with this case is it comes with a very strong chemical smell. After about a week I hardly notice it anymore but at first I wasn't sure I would be able to stand it lol.
What are your opinions on Sony Game Control Mount GCM10?
It's worth to buy for Sony Xperia Z3 Tablet Compact?
I don't like the suction cup mounting method. Not sure how well it would a phone with a case on it. Bought the Nyko mount for 1/3 of the price, and it has been working well enough. Don't think the arm extends far enough for the Tablet Compact though.
Nyko will not fit the tablet Z3
I'll give it a rest with this device. Buy case with stand.
helganin said:
Nyko will not fit the tablet Z3
I'll give it a rest with this device. Buy case with stand.
Click to expand...
Click to collapse
There are people in the comments of the Amazon page for the Nyko mount talking about a simple mod to make it work with tablets. Didn't read into it... But it may be worth a shot
How do you guys like the mount so far? I bought a cheap $13 one for a Dualshock 3 and I'm not a fan. It fits perfectly and holds the phone fine, but what I didn't take into account was that the phone is so heavy. When holding the controller, the phone really puts it's weight on your wrists.
id3alistic said:
How do you guys like the mount so far? I bought a cheap $13 one for a Dualshock 3 and I'm not a fan. It fits perfectly and holds the phone fine, but what I didn't take into account was that the phone is so heavy. When holding the controller, the phone really puts it's weight on your wrists.
Click to expand...
Click to collapse
The NYKO mount suffers the same issue with weight. It feels awkward and topheavy to hold. I'mpretty sure the GCM10 suffers the same problem.