1. Insert Straight Talk ATT sim
2. Set mobile networks to GSM/UMTS
3. Go to system updates and select update PRL
4. After its updated go back to mobile networks and switch it from global back to GSM/UMTS (it will auto switch when you update prl)
5. Go to roaming in settings and scroll to the bottom and set APN
6. Download Signal Check or Signal Check Pro from the play store to show data signal in the status bar
7. The no sim icon will still be in the status bar but you can remove ot with tweakboxand set carrier text
YOU WILL HAVE TO REPEAT THIS EVERYTIME YOU REBOOT YOUR PHONE SO ITS TEMPORARY UNTIL WE GET FULL UNLOCK
PLEASE SHARE AND GIVE THANKS
(I have only tested this with an ATT ST SIM)
I installed cloudy and used network app from the play store and picked cmda/gsm/lte everything works. I didn't even have to set the apn or mess with the dialer it is all good ?
I registered my phone with Straight Talk a couple days ago and I've been trying to get it to work. I've looked everywhere and Straight Talk has lived up to their reputation of having terrible customer service. Anyway, they've confirmed that my phone is activated, but I can't make a call or anything. I'm thinking it has to do with my settings.
Just to cover all the bases, I tried to activate on the CDMA network via the network access code, but I couldn't register my phone due to no coverage in my area (which I know is not true). So I registered on GSM with the ATT SIM card. My Sprint service no longer works, although I'm showing signal bars in the status bar. Whenever I try to make a call it says "Unable to validate your account. Please contact customer services."
I tried the steps listed in the first post but whenever I switch to GSM/UMTS and try to update the PRL it says "Authentication error. Please try again later."
It's also worth mentioning that my phone is rooted and I have frozen a lot of apps, most of which are listed here:
http://forum.xda-developers.com/sprint-lg-g3/general/sprint-g3-bloatware-list-t2873199
If anybody out there can help I'd greatly appreciate it. I'm not sure where else to turn.
You can try my guide it may allow you to fully unlock your settings so you can do what he is saying above.
Here is the thread link: http://forum.xda-developers.com/sprint-lg-g3/general/how-to-gsm-unlock-t2961099
Ok, after much research and many reboots, I've finally got it working. I tried several different methods but the one that finally worked for me was installing the CloudyG3 rom. I'm no expert by any means but my guess is because you have to completely overwrite any evidence of Sprint that is preventing the other carrier's SIM card from working (for me this was ATT through Straight Talk). I had to set my Network mode to GSM/WCDMA/LTE auto. My data is not quite as fast as I had hoped at 21.06 down 3.72 up but at this point it's better than nothing.
A couple problems I've noticed so far is after cloudy finished installing and my Lookout was running it's first test it flagged QuickApps and LGBackup as malicious apps. I didn't uninstall them yet because they seem harmless but I did freeze them with Rom Toolbox just in case. Can anybody confirm that they're safe or that uninstalling them won't cause any bugs? Also my messaging app no longer works which is a little disappointing as I really enjoyed it for a stock messaging app. Anybody know why this is?
what version of cloudy sir?
D-FUSE said:
I installed cloudy and used network app from the play store and picked cmda/gsm/lte everything works. I didn't even have to set the apn or mess with the dialer it is all good
Click to expand...
Click to collapse
what version of cloudy sir?
4g LTE on gsm
D-FUSE said:
I installed cloudy and used network app from the play store and picked cmda/gsm/lte everything works. I didn't even have to set the apn or mess with the dialer it is all good
Click to expand...
Click to collapse
Your 4G is also working in gsm sim?
Related
Hi All,
I know its a topic which has been addressed differently in different threads. I am a user from India and have a GSM SIM. I have got a Verizon S4 phone. I tried using it with Vodafone SIM and get a problem in using it. Surprisingly a NOTE 2 from Verizon works just fine. I am able to use it for data with 3G but not able to use it for voice. Following steps have been tried already.
- Default Options of using Global Mode and GSM/UMTS ** Doesnt search the network at all.
- Hidden Menu Changes using # codes. ** Shows network but emergency mode only.
- Phone Info app to change the mode. ** Shows network but emergency mode only.
- RF Band change using the hidden menu. ** Shows network but emergency mode only.
It does say that it has GSM radio but cant be used for some software reason I suppose. I checked with Verizon Rep and was told that it cannot be used in India with a GSM SIM and would need the Verizon SIM only to connect with International Roaming.
Can I install a I-9505 ROM on this and then would it pick up the GSM signal for voice and data. Please help.
I don't think your Verizon rep is correct. I bought a Verizon S4 just before going to Europe for 1 month. I used first a gsm SIM card from Germany, and then a gsm card from France. I had to add APN's to get data (I used "offline sim APN database" from the market to help get the necessary APN info), but had no trouble with voice or data for my entire trip. The gps and navigation services on the phone were extremely valuable on a couple of occasions, as was the wifi hotspot. In France, you can purchase 2 GB of data service for 20 Euros. I checked with Verizon global services ( 908-559-4899 outside the US or 800-711-8300 from inside ) before I left, and the Verizon S4 was sim unlocked out of the box. They did not make a big deal of my plan to use other SIM cards either.
Sent from my SCH-I815 using xda app-developers app
Installed WamanLite I9505 ROM
Hello All,
I found that Wanam Lite I-9505 ROM can be installed on Verizon S4. I installed it and patched it with Loki-Doki patch to boot up as I got the Verizon Software error. Yet my phone doesnt pick up the GSM signal for voice and SMS. It picks up the signal and I am able to browse internet on it but no calls or SMS. Please help...!!
Is there any way that I can install or flash a regular GSM radio over the phone ? Or tweak it in someway to use the GSM signal as primary for voice and sms.
phrozenwire said:
Hello All,
I found that Wanam Lite I-9505 ROM can be installed on Verizon S4. I installed it and patched it with Loki-Doki patch to boot up as I got the Verizon Software error. Yet my phone doesnt pick up the GSM signal for voice and SMS. It picks up the signal and I am able to browse internet on it but no calls or SMS. Please help...!!
Is there any way that I can install or flash a regular GSM radio over the phone ? Or tweak it in someway to use the GSM signal as primary for voice and sms.
Click to expand...
Click to collapse
I have also Verizon's S4 (i545) and use it in GSM network with only one small problem - it will not send SMS with in-ROM SMS apk to international-formatted numbers (+380-XX-XXX and so on), but send without problem to local-formatted numbers (XX-XXX...) All the rest is working good.
Could you tell me please - how did you get to install i9505's ROM on your device? I have also Verizon's error after installation, and don't know how to run it...
Hi I too have the vzw s4 in india.. and niether voice nor sms is functioning on it.
By rooting it and installing apn manager I was somehow able to get the data 3g working for vodafone ind.
I too am struggling to find a solution to this.
Ive haventvyet flashed it. I came across a guy who said he will be able to get it working but somehow I havent yet been abke to follow up with him.
Guess we both are on the same boat.
Lets keep in touch and update if any of us finds a solution to this.
Sent from my SCH-I545 using xda app-developers app
You all can try to flash my port of ARHD 2.0 ROM, that can be found it this thread:
http://forum.xda-developers.com/showthread.php?t=2346365
It is fully GSM and as international as regular GSM-version of S4. CDMA can be turned on only on hidden test application. Everything else is working and was tested in different networks.
I too created a post seeking help in this regard but didn came across anything concrete yet.
Everyone out here believes it to be a world phone and some have even been using the gsm network in europe but its not working in india.
Ive failed to understand that how come its detecting signals with functioning data is not working on either voice or sms.
Tmobile and atnt gs4 guess have this service menu from where they can be network unlocked explicitly..but unfortunately I havent yet come any such thing for vzw gs4.
Sent from my SCH-I545 using xda app-developers app
ashroh said:
I too created a post seeking help in this regard but didn came across anything concrete yet.
Everyone out here believes it to be a world phone and some have even been using the gsm network in europe but its not working in india.
Ive failed to understand that how come its detecting signals with functioning data is not working on either voice or sms.
Tmobile and atnt gs4 guess have this service menu from where they can be network unlocked explicitly..but unfortunately I havent yet come any such thing for vzw gs4.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Zer0r said:
You all can try to flash my port of ARHD 2.0 ROM, that can be found it this thread:
http://forum.xda-developers.com/showthread.php?t=2346365
It is fully GSM and as international as regular GSM-version of S4. CDMA can be turned on only on hidden test application. Everything else is working and was tested in different networks.
Click to expand...
Click to collapse
I tried installing the ARHD 2.0 ROM but still the same issue persists. The phone picks up the signal for data but when tried selecting network manually or automatic using the GSM / UMTS option, it says disable data to search networks, when data is disabled, the phone shows available networks says phone registered to network but the status still says Emergency Calls Only. Also if tried dialing a phone it says no network available. There has to be something in the modem settings which can be tweaked through the service menu which will change the use of GSM for voice and data and not use CDMA.
phrozenwire said:
I tried installing the ARHD 2.0 ROM but still the same issue persists. The phone picks up the signal for data but when tried selecting network manually or automatic using the GSM / UMTS option, it says disable data to search networks, when data is disabled, the phone shows available networks says phone registered to network but the status still says Emergency Calls Only. Also if tried dialing a phone it says no network available. There has to be something in the modem settings which can be tweaked through the service menu which will change the use of GSM for voice and data and not use CDMA.
Click to expand...
Click to collapse
Did you do a full wipe when flashing ROM? It is mandatory. You will lose all your data though. If there will be no changes after full wipe - then try to install this card into another phone and ckeck if voice calling is working.
Zer0r said:
Did you do a full wipe when flashing ROM? It is mandatory. You will lose all your data though. If there will be no changes after full wipe - then try to install this card into another phone and ckeck if voice calling is working.
Click to expand...
Click to collapse
I did a full wipe. I have 2 Galaxy S4's and also an Optimus G. The card that I am using is my regular SIM card so its not an issue with the card for sure. The ROM was installed on both the phones and neither of them picked up the signal for voice and SMS.
phrozenwire said:
I did a full wipe. I have 2 Galaxy S4's and also an Optimus G. The card that I am using is my regular SIM card so its not an issue with the card for sure. The ROM was installed on both the phones and neither of them picked up the signal for voice and SMS.
Click to expand...
Click to collapse
Ok. To go and chose type of radio-band you may install Battery Monitor Widget from Google Play (well, the main purpose of this app is different, but it is what comes first in my mind). Put it's widget on the desktop, open it and go for bottom right button, named Test. There you can first menu (Device Info) and there you will be able to change all variations of the radio bands and their combinations, available for i545. If non of the combinations will help - mosty probably your operator works on unsupported for this phone cellular format.
Zer0r said:
Did you do a full wipe when flashing ROM? It is mandatory. You will lose all your data though. If there will be no changes after full wipe - then try to install this card into another phone and ckeck if voice calling is working.
Click to expand...
Click to collapse
Zer0r said:
Ok. To go and chose type of radio-band you may install Battery Monitor Widget from Google Play (well, the main purpose of this app is different, but it is what comes first in my mind). Put it's widget on the desktop, open it and go for bottom right button, named Test. There you can first menu (Device Info) and there you will be able to change all variations of the radio bands and their combinations, available for i545. If non of the combinations will help - mosty probably your operator works on unsupported for this phone cellular format.
Click to expand...
Click to collapse
I have the Phone Info app which allows band select. Tried on all possible modes. Same issue persists. Strangely the Note 2 purchased from Verizon works flawlessly without any mods or changes. I am thinking of giving to some professional phone guy who may have code level flashing or modding tools to try and fiddle around with settings of the modem or the radio to pick up the signal here.
phrozenwire said:
I have the Phone Info app which allows band select. Tried on all possible modes. Same issue persists. Strangely the Note 2 purchased from Verizon works flawlessly without any mods or changes. I am thinking of giving to some professional phone guy who may have code level flashing or modding tools to try and fiddle around with settings of the modem or the radio to pick up the signal here.
Click to expand...
Click to collapse
Hey phrozenwire, I am able to use both voice n sms now in my VZW GS4.
And I literally did nothing to make the voice n sms functional. I too had troubles for like 2 weeks and it didn work for me then.
I rooted the phone to add apn settings and the data got activated. But today morning when I woke up ... surprise surprise .. it began to work.. rcvd sms and calls and I was so happy. . Last I remember I switched on the power save mode and my cell fell down twice and guess it did the trick for me.
Thanks all for your help and comments.
Sent from my SCH-I545 using xda app-developers app
Hello Folks,
I was planning to by VZW S4 to use in India & by looking at all your comments it makes me not to buy. Any further updates after so much of discussion on this phone to make it work in India's cellular service. I see the last post was on July 2013 & now any further lucks/success in making this phone work over there in India??
Tx,
Naraynar
---------- Post added at 11:22 PM ---------- Previous post was at 11:21 PM ----------
Hello Folks,
I was planning to by VZW S4 to use in India & by looking at all your comments it makes me not to buy. Any further updates after so much of discussion on this phone to make it work in India's cellular service. I see the last post was on July 2013 & now any further lucks/success in making this phone work over there in India??
Tx,
Naraynar
Here's the deal, I bought my Rezound in 2012 and flashed it to PagePlus Cellular using CDMA WS.
I've used it and it's been fine, running CM10 most of the time. I just bought a Evo 4G LTE and switched to that. So I RUU'd my Rezound, and it says a SIM card is required, etc.. but there are no signal bars.
I go into About Phone > Network >
and Operater name is "Unknown," signal strength is "0", service state is "out of service."
Now, the question is, is that normal? Does the phone need a sim card to connect to verizon towers?
I don't want to sell it while it's not working. I did call up Verizon and they said the ESN was clear for activation though.
So if I sell it and the new user puts in a SIM card, will it clear up all the signal issues? Or have I done the RUU incorrectly? [I did it a couple times because it didn't work the first time (the SD card method, then I did fastboot method)]
Thank you!
That is not normal behavior and you may need to do some more work before you sell it.
Make sure all related network settings are correct for Verizon instead of GSM under Settings > Mobile Network menu.
Try entering on the stock dialer *#*#4636#*#* to access the hidden testing menu as well for the phone radio and verify it is on CDMA. If that code doesn't work on the dialer try it via an app like "Hidden Menus" or even "Battery Monitor Widget" by 3C (click "Tests" icon > Phone information from main page of app.)
Background: I broke off of my Verizon contract six months in and used my phone as a WiFi-only device (VoIP and internet texting apps) for the longest time. While I typically hid my signal icon and ran the phone in Airplane mode with WiFi toggled back on, I would occasionally turn my radio on to resync time and date to the cellular network. With no SIM in it clearly was syncing off Verizon CDMA signal still; I simply wasn't fully activated on the network any longer.
I just made the StraightTalk AT&T SIM card plunge the past couple of weeks and did an NV edit in CDMA WS as well, all alright on GSM. I am on the stock global ICS ROM at the moment, one I know could sync time on CDMA before. However, I cannot get the phone to switch off of GSM even in the hidden testing menu, even without SIM in... Likely has to do with the NV edits I made, and perhaps that may be your case too.
You *could* repurpose the sale as a GSM enabled unit... If it was even set up and working well as such. But due to the current technical issues of getting GSM mobile data above 2G I'd suggest to get it fixed and working back on stock CDMA for the consumer's sake if you can. Again AFAIK It should pick up a CDMA signal even without active service or the Verizon LTE SIM in, did so for over a year lol.
PhantasmRezound said:
That is not normal behavior and you may need to do some more work before you sell it.
Make sure all related network settings are correct for Verizon instead of GSM under Settings > Mobile Network menu.
Try entering on the stock dialer *#*#4636#*#* to access the hidden testing menu as well for the phone radio and verify it is on CDMA. If that code doesn't work on the dialer try it via an app like "Hidden Menus" or even "Battery Monitor Widget" by 3C (click "Tests" icon > Phone information from main page of app.)
Background: I broke off of my Verizon contract six months in and used my phone as a WiFi-only device (VoIP and internet texting apps) for the longest time. While I typically hid my signal icon and ran the phone in Airplane mode with WiFi toggled back on, I would occasionally turn my radio on to resync time and date to the cellular network. With no SIM in it clearly was syncing off Verizon CDMA signal still; I simply wasn't fully activated on the network any longer.
I just made the StraightTalk AT&T SIM card plunge the past couple of weeks and did an NV edit in CDMA WS as well, all alright on GSM. I am on the stock global ICS ROM at the moment, one I know could sync time on CDMA before. However, I cannot get the phone to switch off of GSM even in the hidden testing menu, even without SIM in... Likely has to do with the NV edits I made, and perhaps that may be your case too.
You *could* repurpose the sale as a GSM enabled unit... If it was even set up and working well as such. But due to the current technical issues of getting GSM mobile data above 2G I'd suggest to get it fixed and working back on stock CDMA for the consumer's sake if you can. Again AFAIK It should pick up a CDMA signal even without active service or the Verizon LTE SIM in, did so for over a year lol.
Click to expand...
Click to collapse
in the mobile network, I have it set to "CDMA / LTE" but I tried "CDMA only" and "Global" but none worked.
*#*#4636#*#* didn't work in stock dialer, it just disappeared when I finished typing it.
then I downloaded Hidden Menu, found *#*#4636#*#* in the list, tapped it, and it did nothing. I did some other ones and they did do something. I found htc diag mode, the same one I used to program it originally. I clicked read, and the phone number and min were blank. so I went to the prl and tried flashing a verizon prl file, then rebooted, and still nothing.
I'm going to try to RUU again and hope that solves it.
Update
I RUU'ed again, but still no luck..
Can anyone confirm whether or not, say you got a Rezound out of the box never activated, would you need a SIM card to get the signal initiated? I'm thinking either that's the case and my phone just needs a sim card to jump start it, or my rezound is toast.
Hello from a noob. I have done the saferoot, text edited the sales dat to AWS and changed the other file (forget the name) from OFF to ON. Basically I switched the IMEI on my Metro account to a 545. I kept the same SIM. The store says there demo SIM does not pick up the internet either. The internet worked for 2 minutes and now there is no logo (4g lte, H+ etc) and no connection to the internet at all. I have tried going into the bands etc. but I think I'm missing something (I guess obviously). I have done "everything". Updated the APN settings etc. etc. It is stock rom except the root and the minor text edited changes. It is on 4.3 android. Can anyone out there please tell me how to turn off the stupid VZN LTE band option (I think that is my problem) however when I put in the *#276... command it doesn't pull up the menu that lets you access the band option like I've seen on Youtube. It gives me a different menu with UMTS at the top. I still haven't found the turn off the VZN LTE option. Any help at all would be appreciated. The dialing and text messaging work so it's a clean phone but for some reason the phone is blocking my damn internet. Thanks for the help.
When you installed the MetroPCS SIM, did you configure the APN to use their network?
k1mu said:
When you installed the MetroPCS SIM, did you configure the APN to use their network?
Click to expand...
Click to collapse
Yes sir. I have done it all and nothing has helped. My only thought is finding that switch for the Verizon band or something else in the programming but I can't get to that damn menu. And the *#276.. number is not working on the phone anymore either.
So for those interested that may have Metro and are having the same problem I finally just updated the phone with the stock 4.4 firmware (clean wipe and all that) with Odin and it now works and the LTE no longer shuts off. After hours and hours of agony I finally did it. I tried rooting and everything on 4.3 and I don't care that I lost root - I'm just glad it works now. I do appreciate for what it's worth all the information on here and best wishes to you guys for all the future modding, unlocking the bootloader and all of that. See you around.
OK, I cannot find this information anywhere so maybe someone here can help me.
My wife bought a Galaxy S5 and we had quickly paid it off. Because we only get 2G where we live , we decided to switch to Straight Talk.
After a week of Straight Talk not working correctly (we would have Full LTE service but could not make or recieve calls) we then ported to Cricket AIO.
We are having the same issue and don't know where to start. I wiped out the factory image and installed a debloated Rom thinking removing some
T-Mo junk would help but it doesn't. Everything is correct, APN settings and all. Can somebody shed some light and let me know what to try next?
Thanks
Try *#2263# from the dialer and select GSM networks instead of automatic.
Let us know how it goes.
I am currently using a t-mobile galaxy s5 on cricket without any problems.
Using the stock rom (rooted) I have a cricket SIM card in the device. I booted up the device, went to settings, then more networks, then mobile networks, then default setup and chose automatical. Then, I chose the automatic network option. You could always use the search now option and manually select AT&T.
Next I added the APN. The cricket website has them available so you can manually add them, but I actually had a little icon pop up that let me install them automatically.
Either way, correct APN is essential for texts and LTE.
I then downloaded titanium backup and manually removed t-mobile bloatware. I then downloaded the cricket apps that were recommended (cricket sent a text with the apps when I inserted the cricket SIM)
Finally, I edited the build.prop to say the device is a cricket galaxy s5. I think I changed it to model klteaio.
Other than the boot animation (which I could change if desired) this device is now identical to my Cricket galaxy S5 that I also own. It even says cricket on the top bar like the Cricket branded device. As a matter of fact, the back cover and the startup animation are the only way I can tell the difference between the two.
---------- Post added at 06:28 AM ---------- Previous post was at 06:22 AM ----------
You may want to consider using an app called LTE discovery from the app store to ensure you have lte as an option. I have found that selecting the WCDMA/GSM option instead of the default LTE/WCDMA/GSM under settings-> MOBILE NETWORKS -> NETWORK MODE sometimes provides better service on cricket when the LTE signal is poor. This will turn off LTE, but leave 3G, 2G, talk services enabled.
Good luck.
Zero Lemon was the issue.
After a bunch of testing, I figured out that the zerolemon 8,500mah battery seemed to cause the issue. When we put the original battery back in, calls worked just fine. I tried again with the zerolemon and calls failed.
Thanks for reporting back. I wonder if your extended battery pushes too much load on your device.
If you happen to pop-in the lemon again, put this code in your dialer and let us know what Voltage reads your getting.
Also mention the battery's charge level at the time.
*#0228#
I recently purchased a refurbished phone Samsung Galaxy S21 5G. I just got it yesterday, and found that I am not able to use my mobile network. The sale said it is factory unlocked, and according to the descriptions, it should work just fine with my US Mobile SuperLTE network as well. When I switched on the phone, I see Verizon on the screen and so, I assume that it was locked to Verizon in the past.
When I tried to change the network settings, specifically the APN settings, I get the message "Access Point Name settings are not available for this user." The three dots on the top with reset to default is also greyed out along with Network mode in the previous page. When I click Network Operators and try to connect to the network manually, I am only able to connect to Verizon Wireless and no other. But, calling and messaging seems to work fine. Is it that the unlock process has not been completed properly? Did any of you face the same problem before? It would be great if there is something that I could do to unblock the APN settings as the rest of the phone works really well. The specific model is SM-G991U.
Thanks!
Aisp said:
I recently purchased a refurbished phone Samsung Galaxy S21 5G. I just got it yesterday, and found that I am not able to use my mobile network. The sale said it is factory unlocked, and according to the descriptions, it should work just fine with my US Mobile SuperLTE network as well. When I switched on the phone, I see Verizon on the screen and so, I assume that it was locked to Verizon in the past.
When I tried to change the network settings, specifically the APN settings, I get the message "Access Point Name settings are not available for this user." The three dots on the top with reset to default is also greyed out along with Network mode in the previous page. When I click Network Operators and try to connect to the network manually, I am only able to connect to Verizon Wireless and no other. But, calling and messaging seems to work fine. Is it that the unlock process has not been completed properly? Did any of you face the same problem before? It would be great if there is something that I could do to unblock the APN settings as the rest of the phone works really well. The specific model is SM-G991U.
Thanks!
Click to expand...
Click to collapse
So, you need to go into the settings menu and find about phone, software info. What you want to find is the CSC information.
It will basically look something like this: XAA / XAA-XAA / XAA (or some other letters like VZW or ATT or TMB etc etc.
What taht will tell you is very helpful in determining what rom the phone is running and what kind of device it was originally. Find that in your device and post it and people will help you to figure out what it means.
AsItLies said:
So, you need to go into the settings menu and find about phone, software info. What you want to find is the CSC information.
It will basically look something like this: XAA / XAA-XAA / XAA (or some other letters like VZW or ATT or TMB etc etc.
What taht will tell you is very helpful in determining what rom the phone is running and what kind of device it was originally. Find that in your device and post it and people will help you to figure out what it means.
Click to expand...
Click to collapse
Thank you so much for your reply. I looked through the software section in the about section. I found the following codes about the rom.
Aisp said:
Thank you so much for your reply. I looked through the software section in the about section. I found the following codes about the rom.
Click to expand...
Click to collapse
So the csc info is complicated, I'm no expert on it. But it does look like the OYN indicates it's a multi csc rom. It does have XAA as a part of the code, and that indicates it's 'open' for that specific part. But all the others are VZW. So it's running a vzw rom, obviously.
Your sim US Mobile uses both verizon and t-mobile networks. So it working for calls and texts makes sense, as a vzw phone. You could use patched Odin and flash a different (open) rom, but first you should verify that the device really is unlocked from vzw.
Best way to do that would probably be to insert another carriers sim card and see if it can make calls / texts. If not, it's not unlocked. But are you saying everything works now except mobile data? IOW, no internet access?
I had an international sim card at hand and I put it in. Interestingly the APN settings are no longer blocked. But, I do get a notification from setup wizard saying the inserted sim is not from Verizon and some services may not be available. But, messaging still seemed to work and I was also receiving 4G.
Aisp said:
I had an international sim card at hand and I put it in. Interestingly the APN settings are no longer blocked. But, I do get a notification from setup wizard saying the inserted sim is not from Verizon and some services may not be available. But, messaging still seemed to work and I was also receiving 4G.
Click to expand...
Click to collapse
Oh then yer okay. That message from verizon can be gotten rid of a couple of ways; 1) use adb commands to disable the specific packages 2) use patched Odin and flash a different rom
VZW is the only rom I think that does that, and it's very annoying. I don't remember exactly which packages have to be disabled, but search google and use xda and vzw in keywords and u should find it.
The 2nd option would be my choice. It would do away with vzw crap and with an open rom you may find volte and vowifi will work also.
cheers
Thank you so much for your reply. That sounds great! To just give it a try, I tried putting in a TMobile sim and phone restarted to install software for TMobile. After that the APN settings were unlocked and now I am also able to connect to the internet using my US Moblile sim. The only problem is the the network mode is greyed out.
This rom I think only recognizes network from major telecom providers. So, just flashing with an unlocked rom would just help to unlock all the features and also remove telecom specific crap. I will try to flash it today.
Thank you again!
I also just flashed the stock firmware which is fully unlocked. And there is no bloatware from telecom OEM's. I am now able to use the network and set the APN's, but the Network Mode is still greyed out. Is it possible to know why? I am guessing that if the phone is fully unlocked, I should be able to change the Network Mode. Is there any other info that I can give you to help understand what is happening? I do not see vowifi as well.