I just had a chat with ProClip USA, they said that they will be making a custom holder for the N6.
Tal; We will be designing a holder for the Nexus 6. This design process generally takes between 4 and 6 weeks once the design team obtains the device, but can take longer depending on the device. Once we have a custom holder available for your device we will send you an email with a link to the products.
Tal: If you want to provide your email we can add you to the email notification list. Once the holder is available you will be notified via email.
Click to expand...
Click to collapse
:good:
I have had proclip holders for my , N4, N5, & HTC M8.
They are pretty good if you haven't heard of them before.
-J
Does the charging cable stay in place so you can just slide phone in without having to actually plug the phone In your self?
frigidazzi said:
Does the charging cable stay in place so you can just slide phone in without having to actually plug the phone In your self?
Click to expand...
Click to collapse
They have several different versions but yes, you can get one that the phone just docks into and charges. No need to unplug the phone, just pull it out of the charger.
Jsunn said:
They have several different versions but yes, you can get one that the phone just docks into and charges. No need to unplug the phone, just pull it out of the charger.
Click to expand...
Click to collapse
Thank you. I will have to look into this if I decide to go case less. QI in car is just too slow for me.
I don't like the ones with the built-in charger. I like to have the option to unplug. Every phone I've ever owned has given off crazy feedback noise when the power cable and headphone cable are both plugged in but no audio playing.
Any news on this? I bought for my moto x 2nd gen. By the time i received, i had my nexus 6 lol
A general email from Proclip I received a few days ago announced plans to make a Nexus 6 holder. They offered email notifications when it's ready for release.
bmwh0r3 said:
Any news on this? I bought for my moto x 2nd gen. By the time i received, i had my nexus 6 lol
Click to expand...
Click to collapse
I bought a universal ProClip just for this, when switching phones, no need to keep buying new cradles
I also have a universal clip and it works wonderfully with my N6.
I also have a universal that fits both my wife's M8 and my N6 with case. Probably won't buy a custom again but will continue to buy custom mounts
can any of you link to the specific universal that fits the nexus 6. want to make sure I make the right purchase, thanks
warrenis1234 said:
can any of you link to the specific universal that fits the nexus 6. want to make sure I make the right purchase, thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/nexus-6/accessories/proclip-universal-car-mount-t2948846
I'm a big ProClip fan but have never used an adjustable holder before.
I've been looking at the T1 adjustable holder. It's very clear how it adjusts for differing phone widths. What I can't seem to figure out is how it adjusts to differing phone depths. From what I can tell it doesn't. So if you've got a phone with no case, or a thin case, wouldn't it rattle a bit back and forth. How do you make it fit snugly?
demarcmj said:
I'm a big ProClip fan but have never used an adjustable holder before.
I've been looking at the T1 adjustable holder. It's very clear how it adjusts for differing phone widths. What I can't seem to figure out is how it adjusts to differing phone depths. From what I can tell it doesn't. So if you've got a phone with no case, or a thin case, wouldn't it rattle a bit back and forth. How do you make it fit snugly?
Click to expand...
Click to collapse
If it is a snug fit on the width, it should hold the phone from rocking back and forth, so the depth wouldnt matter too much. I'm not saying squeeze the width of the cradle into a death grip, but a snug fit should hold the phone okay.
demarcmj said:
I'm a big ProClip fan but have never used an adjustable holder before.
I've been looking at the T1 adjustable holder. It's very clear how it adjusts for differing phone widths. What I can't seem to figure out is how it adjusts to differing phone depths. From what I can tell it doesn't. So if you've got a phone with no case, or a thin case, wouldn't it rattle a bit back and forth. How do you make it fit snugly?
Click to expand...
Click to collapse
The width is fixed based on the rails. They give the width of the rails. What they don't say, and is annoying to me, is the phone doesn't have to fit fully between the rails. Most cases aren't completely flat edged, so just part of the sides need to fit within the rails. If the phone and case are narrower the the rails I usually adjust to the phone, take the phone out and adjust the sides in another hair. There is a little flex I the sides, and there is nothing wrong with a little tension as you slide the phone in.
If anyone else has any ProClip questions, feel free to fire away. I'm a reseller for them since I designed holsters for them back in the old palm/win ce days. Can also save you some money over buying direct, we'll except when they have the rare 25% off Sale. That usually kills it for us resellers.
dbpaddler said:
The width is fixed based on the rails. They give the width of the rails. What they don't say, and is annoying to me, is the phone doesn't have to fit fully between the rails. Most cases aren't completely flat edged, so just part of the sides need to fit within the rails. If the phone and case are narrower the the rails I usually adjust to the phone, take the phone out and adjust the sides in another hair. There is a little flex I the sides, and there is nothing wrong with a little tension as you slide the phone in.
If anyone else has any ProClip questions, feel free to fire away. I'm a reseller for them since I designed holsters for them back in the old palm/win ce days. Can also save you some money over buying direct, we'll except when they have the rare 25% off Sale. That usually kills it for us resellers.
Click to expand...
Click to collapse
I can attest to dbpaddler's knowledge of ProClip and his status as a great reseller. I've bought many ProClip custom car mounts and phone holders from him over the years.
Yeah, the T1 holder depth is larger than the phone so if you grab the phone you can sort of tilt it forward or backward. It fits in there snug enough that it isn't flopping around while you drive.
I still want one designed for a naked N6.
dbpaddler said:
The width is fixed based on the rails. They give the width of the rails. What they don't say, and is annoying to me, is the phone doesn't have to fit fully between the rails. Most cases aren't completely flat edged, so just part of the sides need to fit within the rails. If the phone and case are narrower the the rails I usually adjust to the phone, take the phone out and adjust the sides in another hair. There is a little flex I the sides, and there is nothing wrong with a little tension as you slide the phone in.
If anyone else has any ProClip questions, feel free to fire away. I'm a reseller for them since I designed holsters for them back in the old palm/win ce days. Can also save you some money over buying direct, we'll except when they have the rare 25% off Sale. That usually kills it for us resellers.
Click to expand...
Click to collapse
what I don't understand fully is the installation part in the car. videos I've seen were of the person screwing it into place around the vent. how does the universal model fit from car to car?
warrenis1234 said:
what I don't understand fully is the installation part in the car. videos I've seen were of the person screwing it into place around the vent. how does the universal model fit from car to car?
Click to expand...
Click to collapse
They have car specific mounts, Then Mounts for the phones. its kind of a two piece system. I am also waiting for the N6 mount so i can order one and a mount for my Chrysler 300s.
Jsunn said:
I just had a chat with ProClip USA, they said that they will be making a custom holder for the N6.
:good:
I have had proclip holders for my , N4, N5, & HTC M8.
They are pretty good if you haven't heard of them before.
-J
Click to expand...
Click to collapse
They'll have custom holders for every phone, always. It's just time. If you're using a case on the phone then just get an adjustable, and it will most likely be the last cradle you ever buy. I've had the same 875214 cradle since my Samsung Moment. And it has fit every phone since: Samsung Epic, Galaxy S2-4, Note 2, Note 4, Evo 4g LTE and my Avant. The design has change from adjusting in the four corners to the two in the center which started with their smaller adjutable for the iphone with skins and the BB Pearl.
The reason they're able to make cradles and mounts for just about everything with wheels and everything with a battery is because they machine everything. No high cost molds required. Machining has higher costs overall and doesn't really decrease with volume, hence their stuff comes at a premium (which I try to help with when I can). That's why when I was trying to get holsters designed back in the day, all the usual suspects just laughed at me, including Seidio. No volume, not worth our time. People on a grand scale don't want to put their big smartphones in a belt clip holster. ProClip took a look, started sending me prototypes to test, and for a few years had an exclusive in holsters. Then Seidio realized they were missing the boat, and they hopped on as did the other injection molders, and ProClip's business there dried up since they can't make $5 holsters. Their parent company is Brodit out of Sweden. Everything is designed and manufactured there. I sent a few phones and mp3 players to them for testing over the years. They even made a holder for my Rio Karma (dating myself).
Once in a while they'll have a big sale like they did for Christmas at 25% off. That's a rarity. Legally I can say I can offer you a 10% discount. That's the max they allow resellers to advertise. Key word being advertise. I sell through ebay at 10% off and just pray people email me first so I can save them a little more. Not a lot unfortunately, but it can only be so much otherwise it's not worth my time.
That said, there's no better combined mount and cradle system out there. The only problem is they rely on cracks and crevices in the dash to place the mount. Makes inserting and removal easy, great for leasing. But it also limits locations and sometimes dashes are designed as such that the only placement partially covers a vent or is a console mount that sits really low. Companies such as bracketron and pro-fit make the metal dash mounts that attach to the radio mount screw with pretty good placement usually, but it requires removal of the center dash panel. Not all want to tackle that. You start breaking clips, and it's a bear. Though some stereo installers will do it for a nominal fee. They can also tap in to the fuse box and run a 12v socket behind the dash if you want to clean up the wiring a bit and don't want to do it yourself. Companies like Kuda work similarly for mounting buy they have a leather covered box of sorts that clips in with metal bending clips and you screw in the cradle wherever you want. Pro-fit (I think) also makes adhesive type mounts that can be convenient for locations where others can't go, but don't live in Arizona and such as the heat will take its toll on the adhesive sooner than you'd like. The adhesive doesn't mar the dash though upon removal which is nice. Or you can go with the cheap vent mounts, the bean bag sit on the dash or better yet, the cd slot mount. I like my car too much to do that.
Sorry for the run on. I used to be more active promoting and helping when new phones were out, but it does get time consuming, and the real job is a little more important, so I've dropped off a bit.
---------- Post added at 06:39 PM ---------- Previous post was at 06:30 PM ----------
warrenis1234 said:
what I don't understand fully is the installation part in the car. videos I've seen were of the person screwing it into place around the vent. how does the universal model fit from car to car?
Click to expand...
Click to collapse
2-piece system. The cradle for your phone and the dash mount for your car. The dash mounts are vehicle specific and make use of cracks, seams and crevice they can fit in a slender barbed piece that kind of locks in. Some dashes are more flexible for placement than other. If someone is using it around the vents it usually means that's the only place they had an accessible area to place the dash mount. If you go to this link you can use the drop downs to find your vehicle and see what the mounting options are. It's not universal where you can just go from car to car with the cradle. Well, unless you go with their suction cup mount which works on the windshield. But, if you do have multiple vehicles you can buy one dash mount for each car and a move kit. female piece on each dash mount and the male piece on the back of the cradle. Then you can move the cradle from car to car.
The only thing getting screwed in is the cradle to the dash mount as most people just have one primary vehicle. If you're seeing something universal, it's the adjustable cradle. They do have console mounts that are adjustable and can fit in multiple vehicles, but they are more made for one car installation and just adjust to fit.
Related
I am looking for purchase a car mount/holder for my car. However, as i drive a sports car the suspension is very stiff and therefore I need something that will cope with a very bumpy ride (some of the UK's roads are terrible at the moment!). I also use hire cars frequently, so I need something that is interchangeable between vehicles and therefore can't go for one of the brodit models that is specific to my vehicle.
I received a PDA model specific, European made, heavy duty PDA holder for the HTC Touch HD, by Herbert Richter (http://www.pdahut.com/store/product.php?productid=21157&cat=2385&page=1), but this vibrates quite badly so it will be going back.
Therefore, does anyone have any suggestions for a very sturdy car holder that is transferrable between vehicles that will cope with the rigours of a GTi's very firm suspension?
Thank you, in advance, for your help.
Spudgun
My suggestion ...
I drive a 4 wheel drive car (Renault Scenic xR4) because i like to drive through easy mountain tracks from time to time and that's the combination i have. Probably it's not the best solution but i assure you my HD neve falled down and no matter about vibrations. Also, even when it's not the easiest, you can change from one car to another (i do by myself when taking my wife's car).
It's for placing into an air vent of your car.
Rgds,
Thank you very much for your suggestion
How easy is it to transfer between cars? as i had a really bad experience with one of these once and broke the air vent grille of a hire car trying to remove it
spud_work said:
Thank you very much for your suggestion
How easy is it to transfer between cars? as i had a really bad experience with one of these once and broke the air vent grille of a hire car trying to remove it
Click to expand...
Click to collapse
Hummmmmmmmmm ...
Difficult to say, but i never broke it and never broke any grille. ¿Perhaps i did 20 times? For me it's easy to remove it but ...
Rgds,
Get one of those suction cup things from ebay. It's decent quality. The only thing I needed to do to make it work well in the Miata is add some cushion on the bottom so I can rest it against the dash and prevent it from jumping up and down. They move from car to car easily.
http://cgi.ebay.com/Car-Windshield-...34.c0.m14.l1262&_trkparms=|301:0|293:1|294:30
good sturdy support!
I am going to recommend you get a Herbert Richter Gorilla Mount coupled with a custom H.R passive holder.
It's a bit more costly than most other options, but does the best job! Since you can use interchangeable holders on the gorilla mount (eg. if you get a new phone, or a second device) it's a great cost effective option than the non-branded flimsy options normally purchased.
Despite what you may think, it does look 'great' on the windscreen!!
Regards,
- RazzyUK.
Spud_work,
I purchased mine aboyut three months ago, its discreet and completely supports the phone wihtout blocking half of the windscreen
http://shop.brando.com.hk/prod_detail.php?prod_id=03039
Hope this is of use.
Regards,
Niall
I bought the one pictured below (12 Euros on ebay). Here is my opinion (of course I drive normal streets - I can't say how it does on extremely bumpy terrain).
The suction cup sticks really well to the glass (assuming both surfaces are clean, of course). At first, I was scared that the whole thing would loosen up and fall off, and so I kept checking it constantly, but it holds totally firm. Even when I go to take it off and I release the suction-lock lever, the remaining suction is still really strong.
The tray that holds the actual phone fits the HD well, and all buttons and ports are clearly accessible. I wish the phone would fit just a little tighter in the tray, but it is still fine. I never worried that it would "fall out" or anything like that. I suppose it's also good that it is not so tight that it could scratch the HD when sliding it in and out. The tray can also be easily removed and re-attached to the arm. Oh - and of course, the HD will NOT fit if you have any protective case around it (such as the silicone or hard plastic covers).
The "arm" part is easily bent and adjusted at the two joints, so you can set the HD at whatever angle you want in any direction. Once set to whatever angle, it will not loosen or bend on its own.
All-in-all, I'm very pleased with this so far and I would definitely recommend it. The user reviews I read for it on Amazon do so likewise.
I hope this helps.
Cheers!
Hi Chris Cross
As I am also in the market for a mount to use with my Touch HD could you just answer a few questions about this mount which you have:
1. is it fairly compact as the last thing i need is a mount that's in my face and completely overpowering the HD
2. are you still happy recommending it
3. is it easily changed between landscape and portrait modes
4. any chance of a link for it
Thanks for your help
T
Hey guys,
got my Herbert Richter Gorilla Mount today (it's actually the Banana Global 1 with the holder for the HD). I have to say that the quality is brilliant and the HD fits very well. I've ordered it yesterday at gps-haus.de and it arrived today. I payed 25euros (shipping included) which is absolutely OK. Anyone interested in pictures?
Greets,
Nico
n2daico said:
Hey guys,got my Herbert Richter Gorilla Mount today (it's actually the Banana Global 1 with the holder for the HD). I have to say that the quality is brilliant and the HD fits very well. Anyone interested in pictures?Greets,Nico
Click to expand...
Click to collapse
Yes, post some pic's of this strong holder...
I ordered this one from Brando yesterday.
For me, it has a great design, just iphone like and I used a similar holder for my former phone (Hermes).
I drive a sportcar myself and I have to say, that vibration could possibly occur because of the "thin" arm of the holder.
My old holder did vibrate at higher speed, like above 85mph (140km/h) but could handle strong impacts, like chuckholes, very well.
greetz
playdo
playdo said:
I ordered this one from Brando yesterday.
For me, it has a great design, just iphone like and I used a similar holder for my former phone (Hermes).
I drive a sportcar myself and I have to say, that vibration could possibly occur because of the "thin" arm of the holder.
My old holder did vibrate at higher speed, like above 85mph (140km/h) but could handle strong impacts, like chuckholes, very well.
greetz
playdo
Click to expand...
Click to collapse
I have that one and I can confirm that it will shake constantly during driving, which can be seriously annoying. No matter if the road is silky smooth, it will simply shake even from the engine vibration itself.
I had a temporary solution by putting it rather low and using the dashboard as an additional support. This works just fine, so you're probably gonna want to do the same unless you want to get shake-sick from trying to read anything off the screen while driving.
In the end I decided to try one of the shorter car holders that has a stiffer and shorter arm. Will report when it comes in.
Rozenthal said:
I have that one and I can confirm that it will shake constantly during driving, which can be seriously annoying. No matter if the road is silky smooth, it will simply shake even from the engine vibration itself.
I had a temporary solution by putting it rather low and using the dashboard as an additional support. This works just fine, so you're probably gonna want to do the same unless you want to get shake-sick from trying to read anything off the screen while driving.
In the end I decided to try one of the shorter car holders that has a stiffer and shorter arm. Will report when it comes in.
Click to expand...
Click to collapse
I would be interested in any feedback that you have with your new purchase, as i have tried the herbert richter gorilla mount and although that is better, there is still quite a lot of vibration. However, I do own the car with the word's stiffest suspension, so I probably shouldn't expect too much!
I got my holder (look 2 posts before) on friday and I was pleased by the wonderful 360° joint.
But like Rozenthal said, that thing shakes like nothing
It has a far too long arm, so that it can't hold our device in a fixed position.
So now, I mountet the holder plate onto my old, shorter holder (same construction) and I will drive this evening to a friend.
I will post my experience tomorrow!
The one in post #8 is stable. I'm happy with it.
Chris Cross said:
The one in post #8 is stable. I'm happy with it.
Click to expand...
Click to collapse
Is there a UK seller for this? as my German isn't very good!
Didn't got the time to report back yesterday.
But I will give you my experience now:
I tried my old, shorter goose neck holder with the new adapter plate.
And it worked really well
It is stable, although i drive a car with sport suspension, so there are some strong impacts on the holder. If there is a very rough street, it produces a few vibration. But that stops very fast, because the holder is much stronger.
But if you need a very stable holder, take the one from post #8 which Chris mentioned.
greetz
playdo
^that's good feedback...I'm going to check that one out since I'm getting ready to take a long trip on all kinds of roads
eversince i got a brodit phone holder for my old ipaq 6515 from proclipusa.com, I have been using it for all my phones as I just add padding to the holder to accommodate the narrower phones.
however, for HD, with a silicon skin casing (I use capdase), I can just slot the phone into the holder w/o any modification. I kinda like brodit holder because they look 'OEM' (not cheesy universal holder you see elsewhere), at the same time, my ipaq holder could be reused each time I changed my phone with some minimal modification. I change my phone every 4-6 months so it'll be too expensive for me to get a phone specific phone holder.
Someone is finally making a car cradle for the Touch Pro 2 that Verizon and Sprint (Not T-Mobile) should be able to use and its cheap. I emailed the U.S. seller and he said it fits though it is really for the GSM Euro versions. No surprise though as it is passive only. Heres a link to their website: http://www.buygpsnow.com/HAiCOM_Car_Mount_HTC_Touch_Pro2.aspx
Anything is better than a squeeze cradle
I have one ordered so will update a review but at $12.95 and $2.50 shipping kinda hard to go wrong even if it only lasts until Proclip gets off their duffs.
I found a coupon code for free shipping. It is hit or miss apparently but worth a try. Code is 430.
Edit: Code did not work
REVIEW IS ON POST #9
nice find. please let us know how it works. i have a vzw tp2 as well and have been searching for a car holder. right now it sets on my passanger seat...
Just a quick question, why do you think squeeze cradles suck?
I've not had one but was considering a universal mount from Arkon, which is a squeeze cradle.
YodaJM said:
Just a quick question, why do you think squeeze cradles suck?
I've not had one but was considering a universal mount from Arkon, which is a squeeze cradle.
Click to expand...
Click to collapse
Its been years since I've seen a phone thick enough that the jaws need to be anywhere near as deep as the vast majority of the squeeze cradles on the market yet they still make them that deep, at least the ones that are big enough to hold a PDA. This would not be much of a problem except they use soft foam in the jaws that is almost invariably also very thick. When you squeeze it tight enough to keep the phone from falling out, it has a tendency to roll the foam right down over the screen making it difficult to use things like the slide tray in Touchflo 3D. It is also difficult to remove the phone as after a short while the teeth of the jaw start wearing down and it sticks closed making the button hard to push. And thats with a good cradle like and Arkon, which is what I have been using. Lesser quality cradles are even worse. There are better squeeze cradles that address these issues but they are all for Iphones. Saw a nice one the other day with nice thin jaws and rubber grips that fit the phone perfectly with a friction lock instead of teeth and a cam but it had and Ipod cable and FM transmitter built in making it very expensive at like $69. Looked real nice too with a nice shiny finish like the phone has but at that price, wasn't going to buy something that I had to cut up to use. To bad the company did not make one with a USB cable instead. Unfortunately most of the good stuff is made by companies that drank large quantities of the Steve Jobs kool-aid years ago.
Techitrucker said:
Its been years since I've seen a phone thick enough that the jaws need to be anywhere near as deep as the vast majority of the squeeze cradles on the market yet they still make them that deep, at least the ones that are big enough to hold a PDA. This would not be much of a problem except they use soft foam in the jaws that is almost invariably also very thick. When you squeeze it tight enough to keep the phone from falling out, it has a tendency to roll the foam right down over the screen making it difficult to use things like the slide tray in Touchflo 3D. It is also difficult to remove the phone as after a short while the teeth of the jaw start wearing down and it sticks closed making the button hard to push. And thats with a good cradle like and Arkon, which is what I have been using. Lesser quality cradles are even worse. There are better squeeze cradles that address these issues but they are all for Iphones. Saw a nice one the other day with nice thin jaws and rubber grips that fit the phone perfectly with a friction lock instead of teeth and a cam but it had and Ipod cable and FM transmitter built in making it very expensive at like $69. Looked real nice too with a nice shiny finish like the phone has but at that price, wasn't going to buy something that I had to cut up to use. To bad the company did not make one with a USB cable instead. Unfortunately most of the good stuff is made by companies that drank large quantities of the Steve Jobs kool-aid years ago.
Click to expand...
Click to collapse
Thanks for the response, very good reasons not to go with a giant squeeze cradle.
I've been looking at this mount http://www.arkon.com/phonemount.php
Curious if anyone else has used it with the TP2.
My phone works splendidly with a $15 squeeze cradle from Walmart. It's not too thick, secure, and does not obscure the screen.
I have an old Treo 650 Pro-clip mount that works perfectly with the TP2. The phone slides in securely and comes out easily. Obviously no active connection but it works great. I put double sided tape in the back of the of the mount and it holds my Fuze perfectly as well.
yo Techitrucker,
you ever get that car cradle. i am really thinkin bout getting one, but would like to hear some first hand experience with it, especially since we both got vzw
MrGoodCat said:
yo Techitrucker,
you ever get that car cradle. i am really thinkin bout getting one, but would like to hear some first hand experience with it, especially since we both got vzw
Click to expand...
Click to collapse
Just came in the mail on Saturday. The cheap shipping took one week to the day. Quality of the cradle is very good. The clip at the top is actually spring loaded, not just plastic that bends back, like the Seidio holsters. It is removable if you won't need to use the cradle in landscape to make it easier to take in and out. The cut out at the bottom is definitely for the CDMA phones. It should work with the European versions also. THIS CRADLE WILL NOT WORK ON THE T-MOBILE VERSION AT ALL. It is a perfect fit for my Verizon phone. This is not a cradle you want if you need to use the keyboard while it is in. For me that is not and issue and it makes me uncomfortable having plastic wedged between my keyboard and screen anyways. Seems like it would be hard on the slider. The windshield mount is very nice. It has push button friction locks instead of screws for the joints and the rotation is spring loaded so its easy to rotate when needed one handed. The suction cup is very large and has a good positive locking mechanism. It is larger than the average suction cup so if you need a dash disk like I do, you will need the largest one you can find. Unfortunately it does not come with one. Since they are selling this so inexpensively, that probably a place they needed to cut their losses. The quality of the cradle is much higher than the price. The cradle does not use a standard mechanism to join it to the mount so you will either have to use the one it came with or go to the website and see if they have another kind of mounting solution. This is really the only limitation I can find. You will not be able to use it with your Proclip solution if you have one. Any more questions you have, just leave them in this forum.
thanks man sounds sweet. yeah i am just lookin for something to just hold my phone in the car, and this sounds great. thanks for takin the time to review. i am only a couple hours from the websites store, hope it doesn't take a week, hah. buyin one right now.
whats this proclip you are talkin about? i am new to the ppc phone genre. are they really that superior? what would you say makes em better than this cradle you just got? just curious, like hearing first hand experiences, thanks
treo...not! said:
My phone works splendidly with a $15 squeeze cradle from Walmart. It's not too thick, secure, and does not obscure the screen.
Click to expand...
Click to collapse
Hi:
What department did you find it in? I have searched by where the cell phone cases are, and can't find a thing.
Thanks!
cincy1020 said:
Hi:
What department did you find it in? I have searched by where the cell phone cases are, and can't find a thing.
Thanks!
Click to expand...
Click to collapse
check automotive section
MrGoodCat said:
thanks man sounds sweet. yeah i am just lookin for something to just hold my phone in the car, and this sounds great. thanks for takin the time to review. i am only a couple hours from the websites store, hope it doesn't take a week, hah. buyin one right now.
whats this proclip you are talkin about? i am new to the ppc phone genre. are they really that superior? what would you say makes em better than this cradle you just got? just curious, like hearing first hand experiences, thanks
Click to expand...
Click to collapse
I had one for my Touch Pro and it was nice enough but it kind of made the gap between the keyboard and phone wider over time. If you absolutely have to have the keyboard open while driving its probably the best on on the market, though to me that keyboard open is just and invitation to disaster. Its hard enough to keep hands off the phone while closed They are not inexpensive by any means. Depending on how you need to configure it you can easily spend well over a $100 bucks. The powered cradle alone without a car specific mount is $60 which is competitive with other powered solutions, but the non powered ones at $40 bucks seem more than a little like highway robbery to me especially since you will still spend $30+ on the mounting solution for the cradle. Still, if you need that keyboard open its the only decent solution at this time. They have no powered option for Verizon yet, but the non powered one they have listed for the AT&T Tilt 2 will work on Verizon and Sprint. The phones are exactly the same shape as the AT&T phone except for the ports on the bottom. If you want a fitted cradle but don't need the keyboard to open while mounted, this is the posted cradle only real solution I've found, but its inexpensive and good quality.
Now if you want the best of both worlds, I was wrong about the Proclip mounts not working with the cradle. They make absolutely the best mounting solution hands down since there is no damage to the vehicle. They have cradle adapters on the site that will make it work and the price is not to bad.
http://www.proclipusa.com/?sectionp...egoryid=&p_year=&p_countryid=0&p_leftorright=
The suction cup on the cradle is 3.25 inches and this adapter is 3.5 inches so it should work.
I'm not a fan of clamp holders or suction cups, had enough of unintentional flying objects. I usually make my own holders that slip into a vent clip from theclip.com
http://theclip.com/store/Ultra-Clip-with-Vent-Mount-p-16176.html
This time I found a perfect custom made touchpro2 holder for $1.35! It clips right into the vent clip with just a little grinding on the vent clip. It holds the phone solidly and perfectly positioned for easy phone use and GPS mapping.
http://www.cellphoneshop.net/pro2holster.html
Nice find
RemE said:
I'm not a fan of clamp holders or suction cups, had enough of unintentional flying objects. I usually make my own holders that slip into a vent clip from theclip.com
http://theclip.com/store/Ultra-Clip-with-Vent-Mount-p-16176.html
This time I found a perfect custom made touchpro2 holder for $1.35! It clips right into the vent clip with just a little grinding on the vent clip. It holds the phone solidly and perfectly positioned for easy phone use and GPS mapping.
http://www.cellphoneshop.net/pro2holster.html
Click to expand...
Click to collapse
Nice find on the holster. Never had a problem myself with a good suction cup holder and nothing bounces like a Freightliner. I find that taping a small vanity mirror to the dash works much better than those little round plastic disks since they where designed to stick to glass. If you have two phones and two holders like I do, the small rectangular one they sell in the automotive department at Walmart will hold both and its only 2 bucks and looks nice. I am not a fan of any kind of vent clip. The two worst enemies of electronics are heat and cold and something as heavy as a PDA is going to break the vent eventually. What I have done in the past is use something like this: http://theclip.com/store/The-Clip-Mount-p-16156.html with a holster or case.
I'm going to get the holster. Been looking for one that faces out like that.
I already have a clip in the car so won't need to take my mount with me when I get off the road.
Techitrucker said:
Never had a problem myself with a good suction cup holder and nothing bounces like a Freightliner. .... If you have two phones and two holders like I do......
Click to expand...
Click to collapse
Driving a semi, using not one cell phone, but two???
You're probably a great driver. But I'm glad there are several states between you and I.
Techitrucker said:
Someone is finally making a car cradle for the Touch Pro 2 that Verizon and Sprint (Not T-Mobile) should be able to use and its cheap. I emailed the U.S. seller and he said it fits though it is really for the GSM Euro versions. No surprise though as it is passive only. Heres a link to their website: http://www.buygpsnow.com/HAiCOM_Car_Mount_HTC_Touch_Pro2.aspx
Anything is better than a squeeze cradle
I have one ordered so will update a review but at $12.95 and $2.50 shipping kinda hard to go wrong even if it only lasts until Proclip gets off their duffs.
I found a coupon code for free shipping. It is hit or miss apparently but worth a try. Code is 430.
Edit: Code did not work
REVIEW IS ON POST #9
Click to expand...
Click to collapse
tons of this stuff on ebay - pick a random one at 10-12 bucks with free shipping and if it doesnt work out too great its no big loss
Anyone know if this will work for the Tilt 2??
http://cgi.ebay.co.uk/ws/eBayISAPI....5&ssPageName=ADME:X:RTQ:GB:1123#ht_4013wt_939
Thats exactly what im looking for but thats the only thing that comes close. I want a sturdy vent mount that can rotate to landscape mode
BRODIT or PROCLIP here in the USA. They have been on the market for about 100 years. at least :-D
They make active, passive, ... versions of their mounts. For almost all available mobile devices. Great quality.
www.brodit.se
www.proclipusa.com
http://www.proclipusa.com/default.a...egory=4&device_brand=16708&device_model=17907
NOT TRUE.
Just spoke with porclip.
The t-mobile version has not been developed and they do not expect it to be manufactured soon.
mpr_ger said:
BRODIT or PROCLIP here in the USA. They have been on the market for about 100 years. at least :-D
They make active, passive, ... versions of their mounts. For almost all available mobile devices. Great quality.
www.brodit.se
www.proclipusa.com
http://www.proclipusa.com/default.a...egory=4&device_brand=16708&device_model=17907
Click to expand...
Click to collapse
Hi there,
i am looking for a car mount for my lovely 920.
anyone got a decent one with horizontal and vertical capabilities
Same
-adrian- said:
Hi there,
i am looking for a car mount for my lovely 920.
anyone got a decent one with horizontal and vertical capabilities
Click to expand...
Click to collapse
I've been looking for the same thing, swivel capabilities is a must. Anyone find a good one?
Get a decent quality universal car mount (with the four prongs) and then just buy a cheap fixation for your Lumia. That way you can keep the mount when you eventually change phones... That's what I've been doing for the last few years...
I've got a telescopic Herbert Richter car mount which looks like it's the same as this one (http://www.ebay.com/itm/iGrip-Herbe...472900?pt=PDA_Accessories&hash=item48454f5744) and I've been very pleased with it. Unlike some of the cheaper ones I've had it has never lost suction and come unstuck. Most eBay sellers who have cheap Lumia 920 car mounts will sell the phone-specific part of their mounts separately for a couple of euros...
Well .. i dont like the universal ones to be honest because the ones i used never where as usfull as expected. will have a loook at the richter one.
Which car charger can you recommend. I am reading a few amazon.co.uk reviews and they are not to pleased with the ones offered
The one I use (and the one that looks like mine that I posted a link for) isn't one of those universal ones that can be adjusted to hold any size of phone... I don't like those ones either... The ones Im talking about just use a four prong system where you can attach phone specific "faceplates" like you can see here http://forum.xda-developers.com/showthread.php?t=683631 so it looks like it's made for the phone you use it with... Sorry, it's not easy to explain but you should be able to get an idea of what I'm talking about.
does your one come with a car charger already?
got different from belkin etc .. just looking for the power part of a car mount now.
will see if i find a universal holder later
hrmm, not sure if we are allowed to post links on here...
anyways, i bought this one http://www.amazon.co.uk/gp/product/B00AEO3U7W/ref=oh_details_o00_s00_i00
took a gamble as there was no reviews, current review is from myself.
Its pretty solid, I tend to always buy ones for the phone as I'm not a big fan of the all in one mounts, and the nokia one i got for my partners 710 is terrible, won't even hold my phone just slips out constantly. I've got a car charger from maplin to go with it that does do a 1000ma charge as my old charger didn't charge the phone enough to keep up with navigon.
Its as solid as some premium brand mounts i've bought in the past, as good as you can get with one suction cup. (imo) how long it lasts is another thing, but for the price I thought it was pretty neat, a friend borrowed it and immediatly ordered one too.
Its very sturdy and the easist phone mount i've used to slip in and out, only thing that did initially put me off is the fit isn't 100% secure, theres very slight movement, i don't think its even 1mm, thought it would rattle but seems fine in the car.
well i just ordered this for my charging:
http://www.amazon.co.uk/gp/product/B002C3AFHG/ref=oh_details_o00_s00_i00
hope you didnt have this one
and i will have a closer look at the amazon offer, thanks
stead, look at the second photo of the one you bought, see the four prongs? That means the front panel comes off so yours is one of the ones that I was talking about that can be used with any type of phone (as long as you get the right front panel holder piece)... :laugh:
NeoGreendawg said:
stead, look at the second photo of the one you bought, see the four prongs? That means the front panel comes off so yours is one of the ones that I was talking about that can be used with any type of phone (as long as you get the right front panel holder piece)... :laugh:
Click to expand...
Click to collapse
Ah, i thought you meant those univseral one size fits all ones that clamp onto the phone! everyphone holder i've bought has had the 4 prongs, but everytime I buy one I can never find just the phone bit on its own and just end up buying the whole thing again
This is the offending nokia one I bought, its terrible http://www.amazon.co.uk/gp/product/B003D1US46/ref=oh_details_o03_s00_i00
stead said:
Ah, i thought you meant those univseral one size fits all ones that clamp onto the phone! everyphone holder i've bought has had the 4 prongs, but everytime I buy one I can never find just the phone bit on its own and just end up buying the whole thing again
This is the offending nokia one I bought, its terrible http://www.amazon.co.uk/gp/product/B003D1US46/ref=oh_details_o03_s00_i00
Click to expand...
Click to collapse
I've very rarely seen them advertised on their own but if you ask, most eBay sellers who sell the dirt cheap car holders will sell you the phone specific attachment on it's own in my experience and usually for only a couple of euros including postage. Postage must be cheaper in Hong Kong than it is in France... :laugh:
Arkon Slim-Grip Floor Mount SM525-S
FWIW I have been using this model for about 4 years- first with my Tilt2 and now with the Lumia 920 (both without a case and with an Otterbox Defender case as the holder can expand). I had an older version for the Tilt2 which didn't allow for 180deg movement (you couldn't move the phone to landscape position while inside the holder) so when I got the 920 I was able to purchase just the Slim-Grip portion and keep the flexible pedestal part that I already had.
The 4 legs on the Slim-Grip are not permanent- they come in a little bag and you slide them into the body of the phone holder. The move left and right to allow for access to ports on the phone that may not be centered on the phone itself. It also comes with extra legs that are a different shape in case you need a different fitment for your phone (think they are shorter?). The bottom of the Slim-Grip is the part that moves- you push it down with the bottom of your phone and it expands enough to let you then push the top of the phone into the holder so the top legs support it. It isn't obvious from the pictures on Arkon's site at first but you will see a line running across the holder when you look at the pictures and that is where the movement occurs.
I am able to put my phone in the holder with one hand and, because the pedestal part is mounted to one of the passenger seat floor bolts, it's very stable. It's hard to move the pedestal to bend it to different shapes, which is a good thing, because it won't flop all over the place when driving. I can use the 920 without a case in it and with an Otterbox Defender, either way is fine. It allows easy access to the audio and power ports. My friends stick their phones in it too and it holds them just as well (iPhones, Galaxy S3's, Blackberry's etc......).The mount does not impede passenger comfort, however they may not be able to just flop their left leg against the center console because the mount would then be rubbing against the plastic and may leave marks, at least in my Subaru Legacy.
I have used this mount without any problems for close to 5 years now and everyone is jealous of it because it is so secure and convenient. I have no problems recommending it 100%. Good luck.
-adrian- said:
Hi there,
i am looking for a car mount for my lovely 920.
anyone got a decent one with horizontal and vertical capabilities
Click to expand...
Click to collapse
Forget about universal car mounts. Have a look at the products from "Brodit", if available in your country. There's a special mount for almost every car und a special mount for almost every phone and tehere are active and passive holders. i bought a universal-mount and will never again, buy any universal crap. Now gonig downstairs, mounting my Brodit
Dave-Kay said:
Forget about universal car mounts. Have a look at the products from "Brodit", if available in your country. There's a special mount for almost every car und a special mount for almost every phone and tehere are active and passive holders. i bought a universal-mount and will never again, buy any universal crap. Now gonig downstairs, mounting my Brodit
Click to expand...
Click to collapse
You can now order a specific Brodit 920 - un-powered, cig-socket, and hardwired. Excellent mounts, especially the powered ones - amazing how nice it is to just slide the phone in and not worry about fiddling with charger cables...
BigKuri said:
You can now order a specific Brodit 920 - un-powered, cig-socket, and hardwired. Excellent mounts, especially the powered ones - amazing how nice it is to just slide the phone in and not worry about fiddling with charger cables...
Click to expand...
Click to collapse
Do these swivel 90degrees so as to use the phone in landscape as well as portrait?
Griffinx said:
Do these swivel 90degrees so as to use the phone in landscape as well as portrait?
Click to expand...
Click to collapse
They swivel 360 degrees and are very high quality. I've got one in my car that I've also used for my Note II (different holder of course though). It was well worth it IMO.
brodit always had the best ones..
but i read something with "screws" and that made me buy something different for the glas
What did you hear, I'm curious.
Sent from my 920
oh i just found car mounts to be screwed in the cockpit
-adrian- said:
oh i just found car mounts to be screwed in the cockpit
Click to expand...
Click to collapse
Oh OK I understand what you're saying now; I thought you were referring to an issue like the screws scratching the phone or something like that.
I didn't have to screw anything into my dash. I had a mount that clips onto the dash and a holder which is screwed into said mount. Very easy.
It looks like my next phone is going to be a Note 3. Does anyone have any experience with a windshield mount that will work with their case? The case will need to have a holster with belt clip. My current windshield mount is from slipgrip, but most of the cases they offer a mount for on the Note 3 don't seem to have the holster option.
I drive on some pretty rough roads so I need something that will stay stuck to the window and not let the phone bounce out. I use my phone as a GPS, so the windshield mount is kind of important.
See if my car holder plus wireless charger suits your needs.
https://www.youtube.com/watch?v=ZTNAPp2UkkI
It is very very sturdy. Suction on windscreen is awesome. Even after releasing button the suction is awesome abs have to really pull to get it off. Have four other holders and they don't even come close. Screen had frozen a few times due to cold and it stays on when usually my others would have fallen off.
I use it for sat navigation and Google music streaming usually and works great.
The holder had a depression where I insert the wireless charger. You could easily accommodate a belt clip in it.
Looks interesting. The only down side I see if it looks to take 2 hands to place or remove the phone. I don't always wear a bluetooth headset, so one handed removal and installation is kind of important.
bubblesmoney said:
See if my car holder plus wireless charger suits your needs...
.
Click to expand...
Click to collapse
I have been looking for this in the states, but cannot find it anywhere. They are getting ridiculous on ebay.
Did LG stop making them?
Might you know the official LG part number for the car dock?
hoyter said:
I have been looking for this in the states, but cannot find it anywhere. They are getting ridiculous on ebay.
Did LG stop making them?
Might you know the official LG part number for the car dock?
Click to expand...
Click to collapse
i dont know the LG part number. The one i got is made by some one else for the LG WCP300 qi charger, i use the koolpuck qi charger in it as its a lot cheaper. The car holder is called SMART FIT2 cradle (TCD-C800P) and says designed by NEIM for LG Mobile
Not sure if its made by LG or NEIM as in the front it has a hologram sticker on the box saying FOR LG MOBILE. it was less than 25$ when i bought it, and i sent my video link to seller as was happy with product and he withdrew listing and later found all sellers had increased prices from 200$ to 600$ which is crazy. Very few sellers and hence probably demand has gone up. But the product is great and i want to buy another one too but not at these crazy prices! Hopefully soon the prices will come down once other sellers start selling the same seeing demand.
The suction is awesome and i dont think suction can get any better. One handed shouldnt be an issue as you put it in the holder when you sit in car before you drive and later only remove it when you get off. quick release button is efficient. I use the speakers on the phone as i dont like bluetooth headphones or ear pieces. The volume is loud enough for me to use google music and google navigation and phone calls come via the car speakers as mine is an older car where the music doesnt come through the car stereo and only phone calls come through car stero bluetooth connection.
I have the first and second version of the Exogear Exomount. While they have amazing suction to almost any semi flat surface AND work with cases , they do take 2 hands to put your phone in. I also have a TechMatte car mount which has a button in the middle of the back. When that button is pressed, when you put your phone in it, the mount closes down on the device. It has foam padding on each side, so it will not scratch your phone. The only issue you might have with it would be using big cases. My Spigen Bounce and Diztronic TPU fit in the mount snug, but I'm afraid that a bigger case might not fit.
Here's a link to it :
http://www.amazon.com/TechMatte-Easy-Touch-Universal-Windshield-Packaging/dp/B00G3KN9LI
SwiftKey'ed from my White Sprint Note 3 via XDA Premium
I use this from Techmatte. Works great for me
I had an iOttie one touch for my previous phones. The suction cup mount works *very* well. Better than anything I've seen before.
http://www.amazon.com/iOttie-Windsh...UTF8&qid=1385573943&sr=8-1&keywords=iottie+xl
To lock the phone you just place the phone in the dock and push it in. It pushes a button in the center and pulls the sides in, locking the phone in securely.
To remove, you hit two buttons on the side which releases the tension.
One handed in, one handed out.
Oh, and it's very sturdy. Doesn't bounce around like other cheaper mounts.
I ended up going with the slipgrip again. It works well for the Spigen case I ordered, so all is well.
I've struggled to find a phone holder that works well with the size of my note 3 in a Trident Kraken AMS case.
This one however is inexpensive and works well http://www.wilko.com/car-accessories/rockland-mp3sat-nav-holder/invt/0345172?VBMST=car phone holder
I thought I'd post it up in case it helps anyone.
Joe
joebongo said:
I've struggled to find a phone holder that works well with the size of my note 3 in a Trident Kraken AMS case.
This one however is inexpensive and works well http://www.wilko.com/car-accessories/rockland-mp3sat-nav-holder/invt/0345172?VBMST=car phone holder
I thought I'd post it up in case it helps anyone.
Joe
Click to expand...
Click to collapse
Looks okay but I prefer the imagnet...
I love ProClip's holders. You select the custom mount for your car, and then the custom mount for you phone. I've owned several brands of custom clips throughout the years, and I've never been happier.
https://www.proclipusa.com/
Doug
After having tried several car mounts, I have come to a point where I do not want any snake-type car mount - the ones with extensible, adjustable arm ... with time, and car vibrations, they do not really stick in place, and dangle around a little bit.
Lately I happened to pick a glass screen cover from xtreme guard where they offered promotional Flozu car mount + a 90% discount coupon ... at the end, it was really a deal for the both of them..
I have been using the flozu mount since around 1 month now, very solid, top notch. secure suction locking mechanism, seems to hold much stronger to the windshield than my previous ones. The absense of the extensible arm made it VERY stable in terms of vibration and permanent "dangle" . It holds my note 3 firmly (not strongly) between its pliers, and manipulating the plier to open it is very easy - not complicated spring-loaded buttons to press - which get worse with time - which you see on other models. Seriously recommend.
Here is the link to the Flozu mount:
http://www.xtremeguard.com/product-p/car-mount-flozu.htm
mine came today (Flozu mount), fairly quick standard shipping delivery. I expect it'll do a very good job. At first I thought it was rather pricey ($49.99 USD) but then the 75% off discount code appeared -- can't find anything decent in the stores for $12.75! easy to mount to the windshield, nice firm grip of my unprotected S3 (countdown to upgrade: 3days). I'll update after having used it awhile.
Rick
I use mountek products. one of the most stable products to use by locking it in your cd slot or between the dash crevices. Great as some states may not allow suction cup mount on glass.
http://www.mountek.com/shop/
Airframe+
I use the Kenu Airframe+. Mounts in the vent and holds really well. Also works as a kick stand since it's small and you can carry it around with you with you're not in the car.
Best mounting system I've ever owned, but it's not cheap.
https://www.proclipusa.com/
Doug
I use this holder for my Note 3. Its been good for a year now and cheap.
Can twist it for landscape or portrait and can hold any phone as most of us use cases on our phones it will fit any phone... One problem is your car will need to have strong vents and not too deep directors inside as the back will need to grip onto those.
EBay number item number 311275702025 check can't post link as I'm a new member.
Masik v6.0 lollipop Note 3 N9005
I just bought my second one of these. Super sturdy and the suction cup has a gooey material on it that literally will stick to just about anything!
second this!
ickensai said:
I use mountek products. one of the most stable products to use by locking it in your cd slot or between the dash crevices. Great as some states may not allow suction cup mount on glass.
http://www.mountek.com/shop/
Click to expand...
Click to collapse
I've had this mount for around 2 years and I love it! 2 of my friends got it after they saw mine.
I hardly ever use my CD changer but it still functions normally if you do.
In my car it puts the phone in the perfect place. Here's a few pictures of it in my car so you know how it looks.
Hello
In the past I used only phone specific holders like proclip. Works fine but expensive. Now the kids want to use the car too so I changed to an universal holder.
Now I use http://www.rammount.com/part/RAM-HOL-UN7BU
Fits the s4 mini and my Note 3 too.
Besides the holder you'l need:
Ball base http://www.rammount.com/part/RAM-B-202U
Arm: http://www.rammount.com/part/RAM-B-201U-A (various lengths available).
Not cheap but you by it once.
joebongo said:
I've struggled to find a phone holder that works well with the size of my note 3 in a Trident Kraken AMS case.
This one however is inexpensive and works well http://www.wilko.com/car-accessories/rockland-mp3sat-nav-holder/invt/0345172?VBMST=car phone holder
I thought I'd post it up in case it helps anyone.
Joe
Click to expand...
Click to collapse
I got a simple silicon mat on ebay - sticks like glue to the dash and you can just slap the phone on it (gently) and it sticks even on bumpy roads. And if it gets dusty you can just wash it in water - works brilliantly and cost me about $5
Looks a little like these but the 'bumps' aren't so noticeable on mine.
ProClip
I've used ProClip mounts in two different trucks with three different phones. I wouldn't use anything else. You buy the mount in two pieces - one piece for the vehicle, that's specific to the vehicle, and where in the vehicle you want to mount the phone. It has tabs that insert into the existing seams of your car's interior. No drilling, no bolts to unscrew, a very clean installation. The other piece you buy for the phone (or tablet, or GPS unit). They have many phone mounts each designed to fit a specific phone - as long as you don't have a case on it. They also have phone mounts that are more universal in nature for those that use a case. Any of the phone mounts will attach to any of the vehicle mounts.
It's expensive - each piece has cost me between $35 and $40, so around $75 when you first buy the system. But if you get a new phone, you only have to replace the phone mount. If you get a new car, you only have to replace the vehicle mount.
It's a premium mount. It holds your phone firmly in place, and it's a clean , professional looking installation. I think it's worth the cost.
For my Note 3, I've been using the Exogear ExoMount Touch -http://www.exogear.com/products-exomount-touch-one-touch-car-mount-holder.html . The reusable adhesive pad works surprisingly well and it is a cinch putting in and taking out my Note 3, even in my Urban Armor Gear case. Simply put the phone into the mount and the arms snap close around the device, and to remove I just press the release buttons. Easy in, easy out.
The one issue I had was one one occasion the tightening nut cracking, but I think that was as a result of me carelessly over-tightening on one occasion. The company quickly sent me a free replacement, however.
Journyman16 said:
I got a simple silicon mat on ebay - sticks like glue to the dash and you can just slap the phone on it (gently) and it sticks even on bumpy roads. And if it gets dusty you can just wash it in water - works brilliantly and cost me about $5
Looks a little like these but the 'bumps' aren't so noticeable on mine.
Click to expand...
Click to collapse
Had this kind of things, but last summer, they melted, and left mark on dashboard :/ couldn't clean, now you can see it, so beware of the heat/sun
Ps2004 said:
Had this kind of things, but last summer, they melted, and left mark on dashboard :/ couldn't clean, now you can see it, so beware of the heat/sun
Click to expand...
Click to collapse
Not sure where you are, but mine's been through some pretty hot days with the car parked in the sun and no problems. Silicon shouldn't melt - it melts around 1400ºC - if your car is getting that hot you'd have to be approaching the Sun I think. Maybe yours was plastic?
Just check my history on dx.com, and yes, it seems you were right, it was PVC, must say I didn't check that as it said made for car dashboard.
Anyway, just be careful what you buy.
Oeps said:
Hello
In the past I used only phone specific holders like proclip. Works fine but expensive. Now the kids want to use the car too so I changed to an universal holder.
Now I use http://www.rammount.com/part/RAM-HOL-UN7BU
Fits the s4 mini and my Note 3 too.
Besides the holder you'l need:
Ball base http://www.rammount.com/part/RAM-B-202U
Arm: http://www.rammount.com/part/RAM-B-201U-A (various lengths available).
Not cheap but you by it once.
Click to expand...
Click to collapse
I second the RAM mounts. I use the cupholder version, then the ball arm, and the X clip. I can even swap out the attachment with my medium/large RAM holder that fits a nexus 7, or my large holder that fits an ipad air. Ram mounts aren't cheap, but they're versatile and built to last. I'll never need to buy another mount system again, unless I find a really oddball device in the future and need a new attachment for the Ram.
I finally found the perfect mount for my taste. Universal + with charge function.
http://www.1a-pc-shop.de/shop/hr-30417-universal-smartphone-charging-dock.html
You cand adjust the x and the z axis of the power connector holder at the bottom. There are 5 adapters included for different cables. Works very well with my usb 3.0 car charger. Silicon case no problem.
Now I just slide in the Note 3 and it charges. And this should work for many devices to come.