[Q] No mobile network after flashing roms - Sprint Samsung Galaxy Note 3

Would like some help. I have flashed CM 11 and can't make calls. It says mobile network not available. Tried flashing AOKP rom as well and same thing. Mobile data works fine, although i have gotten a popup twice that says 'Google Play Services not supported by your device, please contact your manufacturer' (no noticible issues from this, google stuff i've tried so far works). I have included a screenshot so you can see my baseband and rom version, etc.
Now, i had a great deal of trouble getting a rom flashed to start with, CWM put me into a bootloop and TWRP wouldn't flash anything because it said it couldn't mount /storage when i tried. Used Philz advanced CWM (love it btw, will be using it from now on). Still wouldnt flash the hltespr specific CM11 version so had to use the unified hlte version (it gave me the status 7 asserts issue, but editing the asserts out just gave me a bad file error when flashing). I wiped data/cache/dalvik between each flashing. I don't know if any of that would have bearing on this problem, just including any details i can. Any advice?

Verilin said:
Would like some help. I have flashed CM 11 and can't make calls. It says mobile network not available. Tried flashing AOKP rom as well and same thing. Mobile data works fine, although i have gotten a popup twice that says 'Google Play Services not supported by your device, please contact your manufacturer' (no noticible issues from this, google stuff i've tried so far works). I have included a screenshot so you can see my baseband and rom version, etc.
Now, i had a great deal of trouble getting a rom flashed to start with, CWM put me into a bootloop and TWRP wouldn't flash anything because it said it couldn't mount /storage when i tried. Used Philz advanced CWM (love it btw, will be using it from now on). Still wouldnt flash the hltespr specific CM11 version so had to use the unified hlte version (it gave me the status 7 asserts issue, but editing the asserts out just gave me a bad file error when flashing). I wiped data/cache/dalvik between each flashing. I don't know if any of that would have bearing on this problem, just including any details i can. Any advice?
Click to expand...
Click to collapse
Have you upgraded your bootloader to NH7? I know most of the newly-updated CM-based ROMs require you to be on NH7 before flashing. That's most-likely why you weren't able to flash the htlespr ROMs. The unified ROMs no longer include the correct APNs for Sprint, so that's why you don't get service on it. I don't know why mobile data works on it.

topherk said:
Have you upgraded your bootloader to NH7? I know most of the newly-updated CM-based ROMs require you to be on NH7 before flashing. That's most-likely why you weren't able to flash the htlespr ROMs. The unified ROMs no longer include the correct APNs for Sprint, so that's why you don't get service on it. I don't know why mobile data works on it.
Click to expand...
Click to collapse
No, didnt realize that i needed to do that. I'll do some research on it because i don't have any idea how to update the bootloader. If you have a link to a good tutorial that would be wonderful! Thanks!

Ok so i tried that, found this tutorial, followed it, no luck. Tried full wipe/reset after that to see if it would let me install the hltespr versions, still no dice. Same situation, mobile data works, calls don't. Will have to wait till daylight to try texting so i don't wake anyone up but i suspect that texting won't work either. Has anyone experienced this and fixed it? Lol i really didn't drop $100 on a phone to be saddled with all the Samsung and Sprint baloney that it comes with, don't wanna unroot....

Bump
Anyone have ideas on this? Have continued to try fooling around with the udater-script file to resolve the status 7 problem so I can install the hltespr variant, still no dice. Please someone help!

Bump!

Sorry, I typically don't have access to XDA forums on the weekend, so couldn't answer your question till now.
You flashed only the baseband/modem, not the Bootloader. If you want to update the Bootloader, you need to use ODIN to flash the Complete OTA NH7 Update.
In order to update the Bootloader, you need to make sure that you use the PC ODIN (not the mobile one) and that you completely power off the phone before you enter download mode (don't access download mode by using the extended power menu when shutting down the phone). I don't think you need to do the battery pull that Freeza had in his instructions (I didn't do it when I ODIN-flashed the NH7 OTA update), but it wouldn't hurt to do it.

Thanks for that, I will try it as soon as I get home tonight! The next thing I had decided to try was to unroot, to back to stock, then try flashing that before I start with the custom recovery and ROM. Do you think I should do that first before doing the whole thing or could that work just flashing that with my phone as-is?

Verilin said:
Thanks for that, I will try it as soon as I get home tonight! The next thing I had decided to try was to unroot, to back to stock, then try flashing that before I start with the custom recovery and ROM. Do you think I should do that first before doing the whole thing or could that work just flashing that with my phone as-is?
Click to expand...
Click to collapse
Well, I always recommend a full wipe (data, system, cache, dalvik) when flashing ROMs. I haven't wiped my internal storage or external storage since I got the phone, so that's not really necessary.
I don't think that unrooting your current ROM is necessary. Flashing the ODIN OTA update will automatically remove root access, so that's not an issue. Here's the steps I took when I updated to NH7 and installed my current ROM (see my sig):
Make a Nandroid backup.
I always do this just so I have a "record" of what I left behind. It also allows me to have all of my app data that I can restore via Titanium Backup (you have to buy the Pro version in order to restore specific apps from a Nandroid backup). I always store a copy on my ext. storage and on dropbox.
Do a full wipe
As I mentioned above, I always wipe data, system, and the caches when flashing ROMs. While I have to take some time to get the new ROM exactly as I like it, it minimizes any potential FCs and errors that some people get when dirty flashing.
Install NH7 all-in-one via ODIN
I installed the NH7 via ODIN. Please note that this is the fully stock, unrooted ROM and will also install the stock recovery.
Let the phone boot and connect to Sprint. Update Profile and PRL.
I do this periodically whenever I go back to stock (from AOSP). I rarely have connection issues, but updating the PRL an profile can help with those.
Install a custom recovery using ODIN.
My recovery of choice is TWRP, but others have found just as much success with CWM and Philz. Just make sure that you're installing the correct version of the recovery (4.4.X version, not the 4.2.X version). I always reboot to the main system after installing a recovery, but that's up to you. In the rest of this post, I'll say "TWRP," but I really mean "custom recovery."
[OPTIONAL] Make a Nandroid backup of the stock ROM
I always do this, but I recognize that it's not necessary, especially since we can just ODIN back to this image at any time. I just like having the option of having a stock backup on the device (in case catastrophe strikes while I'm away from a computer).
Use TWRP to flash your AOSP ROM of choice.
If you haven't installed any apps or messed around with the settings, you shouldn't have to wipe before flashing, but (in case you haven't noticed by now), I tend to err on the side of caution, specifically: wiping everything (data, system, and the caches) before I flash anything.
Set up the ROM how you like it and [OPTIONAL] make one last Nandroid Backup
Whenever I set up a new ROM to the exact way I like it (statusbar settings, accounts set up, apps installed and configured, etc), I make a nandroid backup of my device. This allows me to go back to that "fresh" image whenever something happens to the device and I don't have to muddle around fixing those minor tweaks. Again, I tend to err on the side of wiping the phone too often and taking too many backups, but I've rarely had issues with my phone and ROMs because of it (to the point where I can spend most of my XDA time helping others with their phones), so it might be prudent to follow the advice.
Anyways, that's how I upgraded to NH7 and installed a custom ROM. Others may take a less conservative approach and you're welcome to adjust any of the optional steps.
Hope this helps!
-Topher

OK, did all that successfully, when it went back to stock stiil had the same issue. Mobile data functions, mobile network for calls/SMS doesn't. Did the whole update prl/profile and even tried reactivating from settings, still nothing. Was able to install custom recovery (Philz) and the hltespr CM11 variant instead of the unified generic version. Still has the same problem, mobile network not available. Everything else works perfectly. I did verify in settings that it still wound up as the NH7 after everything I did. Note I did a full reset before each thing that got flashed in this process, and one more for good measure after. Let it boot to the system between steps too.
Lol I've been rooting and switching between ROMs for years and have never encountered anything like this. I'm stumped....

Verilin said:
OK, did all that successfully, when it went back to stock stiil had the same issue. Mobile data functions, mobile network for calls/SMS doesn't. Did the whole update prl/profile and even tried reactivating from settings, still nothing. Was able to install custom recovery (Philz) and the hltespr CM11 variant instead of the unified generic version. Still has the same problem, mobile network not available. Everything else works perfectly. I did verify in settings that it still wound up as the NH7 after everything I did. Note I did a full reset before each thing that got flashed in this process, and one more for good measure after. Let it boot to the system between steps too.
Lol I've been rooting and switching between ROMs for years and have never encountered anything like this. I'm stumped....
Click to expand...
Click to collapse
Dumb question but are you a Verizon customer or Sprint?
Sent from my SM-G900P using Tapatalk

Sprint, I've had big red before but when they did away with unlimited data it wasn't worth paying their high rates.

Bump!

Anyone have any ideas on this? I am just confounded as to why this continues even after being reset to stock.

Same Issue!!!
I have the exact same issue and have been trying to resolve it for the last 2 days... Did you find a solution?

I have the same problem on a Samsung Mega. LTE and 3G data work but phone won't dial if LTE is active. It WILL voice dial if only 3G is active. Sprint. CM11.

I had this problem after flashing ROMs as well, but went into Settings>Connections>More Networks>Mobile Networks>Network Mode and selected LTE/CDMA....no network had been selected. That fixed me right up. Weird part is, I could still avcess the web without WiFi....but couldn't make calls or ise my bluetooth headset until I had performed the above steps. Hope that helps.

thanks forget the little things reset wifi and sprint cell extender
GAPO said:
I had this problem after flashing ROMs as well, but went into Settings>Connections>More Networks>Mobile Networks>Network Mode and selected LTE/CDMA....no network had been selected. That fixed me right up. Weird part is, I could still avcess the web without WiFi....but couldn't make calls or ise my bluetooth headset until I had performed the above steps. Hope that helps.
Click to expand...
Click to collapse

Related

[Q] No data connection after new rom flashed

Hi all,
I've flashed quite a few times before I settled with my current Insanity rom. But then I decided to try out some new ones since I have time during the holidays.
I tried flashing Omega and Delv with cwm (Whatever version they currently have now), both at the startup didn't allow me to bypass by pressing the 4 corners. i thought nothing of it and just continued on and restored my stuff using titanium backup. before my sms, gmail accounts and call logs will get restored but it didn't for both. so i decided to restart my phone to see if it'll come up. it did not. in fact, the data connection goes missing. (i did get data connection when i first loaded up the phone right after the flash using cwm) i only have full bar of signal, but no data.
I thought it was just a rom thing or a bad download, that's why I tried flashing another rom, but once I restart my phone, the data connection goes.
I got so frustrated that I just restored my old (current) rom from cwm.
If anyone can help me on finding out what may be the problem, that'll be great. I really do want to start flashing different roms again because I'm getting bored with my current one.
thanks in advance!
shirbo.g said:
Hi all,
I've flashed quite a few times before I settled with my current Insanity rom. But then I decided to try out some new ones since I have time during the holidays.
I tried flashing Omega and Delv with cwm (Whatever version they currently have now), both at the startup didn't allow me to bypass by pressing the 4 corners. i thought nothing of it and just continued on and restored my stuff using titanium backup. before my sms, gmail accounts and call logs will get restored but it didn't for both. so i decided to restart my phone to see if it'll come up. it did not. in fact, the data connection goes missing. (i did get data connection when i first loaded up the phone right after the flash using cwm) i only have full bar of signal, but no data.
I thought it was just a rom thing or a bad download, that's why I tried flashing another rom, but once I restart my phone, the data connection goes.
I got so frustrated that I just restored my old (current) rom from cwm.
If anyone can help me on finding out what may be the problem, that'll be great. I really do want to start flashing different roms again because I'm getting bored with my current one.
thanks in advance!
Click to expand...
Click to collapse
I'm sorry my English award is not very good I am a Chinese.
can you make sure that you have wipe your phone 2 times?
wipe data factory reset and wipe cache partition? before you flash a new rom?
and the problem may be your kernel don't work well . you can flash another new kernel or flash a new cwm
wipe your phone is very important
if these mind can not make your data well you should flash your phone
by odin . use this software to make your phone well
thank you for your reply.
I have wiped my phone very thoroughly: wipe cache, factory reset and even dalvik.
aren't the kernels automatically installed when i install through CWM?
i'm not too sure about this kernel thing as the many times I flashed before, I never had to install kernels on its own through odin. i just flash the zip file of the rom through CWM and it's all good.
so you're saying i should use odin to flash instead of cwm? is there a major difference? i'm much more comfortable with cwm though.
Try flashing a new modem .
Check IMEI is correct .
jje
Have you set your APN settings correctly according to your phone carrier's settings?
Also try your carrier's CSC on your phone.
Set your APN manually, I had this before as well...
Other options is to get the Tweaker App from the Market and when connected via Wifi then it sets your APN as well.
Gesendet von meinem GT-I9100 mit Tapatalk
Thanks for the suggestions.
The APN one sounds easier to do. That option's under wireless and networks correct?
Currently, I only have one selected. I'll check it out when I flash the new rom.
What's this csc though??
Sent from my GT-I9100 using XDA App
What's this csc though??
Country specific settings a list of local networks and there settings .
See stock roms thread .
jje

Stuck on boot screen and have tried many, many times...

The gist of my problem: Earlier today I successfully installed the latest CM9 from Joker (.0.7.0.0). Unfortunately, all wireless services other than WIFI were down (including SMS and telephone), and on start the phone produced an error about the com.android.phone force closing (or some such). I figured I had screwed something up, so I reflashed the clean stock firmware.
Since then (roughly 12 hours ago), I've been getting the stuck on the boot screen whenever I try flashing CM9. Relevant details follow:
Logcat doesn't help -- it tosses an error about the shell directory or file not being found (the exact error message escapes me, but I can reproduce it if need be).
I've tried formatting cache, data, and system, followed by a wipe (or two) on several occasions.
I've also tried flashing various versions of CM9 -- specifically .0.7.0.0 and .3.1. Both give the same result. I've also tried whatever version is in the KitchenSink v2.11 installer. Same result.
My CMW version is the 5.0.2.8. I installed it through RomManager (as opposed to the command prompt on Windows, which I did the first time when it quasi-worked). I've read that using v2 fixes this issue, but I can't find a live copy anywhere, so I haven't been able to try it.
Rather than going for a completely new install every time I bork something, I made a backup just after I finished unlocking and rooting the phone. I just restore that backup after each attempt, and it goes back to working fine on the stock Android firmware (3.whatever).
Any ideas? I think I'll try starting completely from scratch again and not using RomManager tomorrow, but if anyone can point out my error before then and save me a lot of -- hopefully not wasted -- effort, it would be fantastic.
Cheers,
Vash
vash265 said:
The gist of my problem: Earlier today I successfully installed the latest CM9 from Joker (.0.7.0.0). Unfortunately, all wireless services other than WIFI were down (including SMS and telephone), and on start the phone produced an error about the com.android.phone force closing (or some such). I figured I had screwed something up, so I reflashed the clean stock firmware.
Since then (roughly 12 hours ago), I've been getting the stuck on the boot screen whenever I try flashing CM9. Relevant details follow:
Logcat doesn't help -- it tosses an error about the shell directory or file not being found (the exact error message escapes me, but I can reproduce it if need be).
I've tried formatting cache, data, and system, followed by a wipe (or two) on several occasions.
I've also tried flashing various versions of CM9 -- specifically .0.7.0.0 and .3.1. Both give the same result. I've also tried whatever version is in the KitchenSink v2.11 installer. Same result.
My CMW version is the 5.0.2.8. I installed it through RomManager (as opposed to the command prompt on Windows, which I did the first time when it quasi-worked). I've read that using v2 fixes this issue, but I can't find a live copy anywhere, so I haven't been able to try it.
Rather than going for a completely new install every time I bork something, I made a backup just after I finished unlocking and rooting the phone. I just restore that backup after each attempt, and it goes back to working fine on the stock Android firmware (3.whatever).
Any ideas? I think I'll try starting completely from scratch again and not using RomManager tomorrow, but if anyone can point out my error before then and save me a lot of -- hopefully not wasted -- effort, it would be fantastic.
Cheers,
Vash
Click to expand...
Click to collapse
Use this recovery. http://forum.xda-developers.com/showthread.php?t=1218417
Or jokers at http://forum.jokersax.com/discussion/25/joker-recovery-for-the-photon-v3
I use the first link. Works perfect. Once you install the recovery. Wipe everything. Install 0.3.1. Boot into the system. Go back and flash the newest 0.7.0 update with gapps.
Should fix all the issues.
Sent from my SGH-I777 using XDA
Well, I got .3.1 working. Then tried to install .7 and it crapped itself again. Should I have cleared all the data/caches/etc. between the two?
Edit - I tried it again but this time cleared all the data between installs. It booted, but I got the same 'android.phone failed to start' message.
Edit 2 - Alright, I think I got it. I didn't clear anything between the two installs, but I installed each firmware twice without exiting recovery mode either time. It seems to be working (phone works, at least), although I'm not sure my 3G is working...
na7q said:
Use this recovery. http://forum.xda-developers.com/showthread.php?t=1218417
Or jokers at http://forum.jokersax.com/discussion/25/joker-recovery-for-the-photon-v3
I use the first link. Works perfect. Once you install the recovery. Wipe everything. Install 0.3.1. Boot into the system. Go back and flash the newest 0.7.0 update with gapps.
Should fix all the issues.
Sent from my SGH-I777 using XDA
Click to expand...
Click to collapse
Joker's recovery is a zip file you can flash from 5.0.2.8 if you don't feel like hooking up to the computer and using fastboot. But 5.0.2.8 doesn't work right to flash roms.
Sent from my MB855 using xda app-developers app
Aside from not being able to connect to any 3G networks (which is a problem...), it looks like it's working. Any ideas why 3G doesn't work now?
Thanks for the help thus far =)
vash265 said:
Aside from not being able to connect to any 3G networks (which is a problem...), it looks like it's working. Any ideas why 3G doesn't work now?
Thanks for the help thus far =)
Click to expand...
Click to collapse
Install 3.1, boot, reboot to recovery, wipe cache and dalvik, install 7.0, install gapps, boot.
Sent from my MB855 using xda app-developers app
Acvice said:
Install 3.1, boot, reboot to recovery, wipe cache and dalvik, install 7.0, install gapps, boot.
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
Yep...already did that and got it to boot just fine. Now I'm struggling with poor reception. I've seen other users (different phones) mention radio upgrades, but I was extremely unfamiliar with the terminology. The phone seems to work okay, but I only get 1x reception for data.
Or were you actually suggesting to repeat the entire process?
Edit - Tried again, still no luck with 3G.
vash265 said:
Yep...already did that and got it to boot just fine. Now I'm struggling with poor reception. I've seen other users (different phones) mention radio upgrades, but I was extremely unfamiliar with the terminology. The phone seems to work okay, but I only get 1x reception for data.
Or were you actually suggesting to repeat the entire process?
Edit - Tried again, still no luck with 3G.
Click to expand...
Click to collapse
Before doing what i stated did you wipe everything (system, data, cache, dalvik)? Also, you still getting a forceclose upon boot or just crap signal? And are you on sprint or electrify?
Acvice said:
Before doing what i stated did you wipe everything (system, data, cache, dalvik)? Also, you still getting a forceclose upon boot or just crap signal? And are you on sprint or electrify?
Click to expand...
Click to collapse
I wiped everything. I can boot into the OS and my phone works fine, but my data rate is stuck on 1x (so crap signal). I'm on sprint.
vash265 said:
I wiped everything. I can boot into the OS and my phone works fine, but my data rate is stuck on 1x (so crap signal). I'm on sprint.
Click to expand...
Click to collapse
well did you have 3g on stock? there's no reason it would go to 1x unless 3g is unavailable. the rom shouldn't cause it to go into 1x.
na7q said:
well did you have 3g on stock? there's no reason it would go to 1x unless 3g is unavailable. the rom shouldn't cause it to go into 1x.
Click to expand...
Click to collapse
Yep. Despite popular belief, I'm not a moron =) I'm in the dead center of 3G availability for Sprint in my area, and with stock android I get perfect 3G reception. I've read reports of the same things happening to other people, but haven't found a solution yet. I restored to stock after making a backup to try updating the PRL. I'll update again when I find out if it worked or not.
Edit - Sprint just sucks, apparently. http://www.sprintusers.com/forum/showthread.php?t=225908
When I rebooted to stock I checked the radio status and sure enough, 1xRTT. Evidently I am a moron =p
There was something wrong with the phone afterall. To fix it, I did the following:
Dial *#*#4636#*#*
You'll be presented with a menu. Go to Phone Information.
About halfway down the page, there will be a menu with a dropdown. Mine was set to CDMA. To fix the issue, I changed it to CDMA auto (PRL). I'm now receiving excellent 3G reception.

[Q] FIXED! ATT SGH-I717 Sim card error!!

*READ BELOW FOR A GUIDE TO FIX*
I've had my note for over a year now and i have had it rooted pretty much the entire time. Never any problems with it up until recently it started doing this thing where it would keep restarting. It would boot up and less than a minute later just restart. Off and on for a few days it was doing this. I was still running 2.3.6 at that point. So i decided to push 4.0.4 via odin since kies didnt support the firmware. Everything was working fine for a few hours then all of the sudden "the ring of death" showing me no service. Went through the phone and noticed it was saying there is no sim inserted. Tested sim on another phone. Works fine. Since then ive figured out via kies i can recovery and update firmware. Tried that. No Bueno. Now im to the point where im on 4.0.4 with no service. I've scoured through forums trying all kinds of different things, pushing different roms and modems via odin and cwm. Still no bueno.
Baseband version
Unknown
Kernel Version
3.0.8
Build Number
IMM76D.UCLF6
If anyone can give me ideas im willing to try them out.
Thanks.
I got it working so heres a direction for anyone else who has this issue!
Replaced Sim&SD card reader-No fix
After flashing all kinds of roms & modems still same issue saying no sim inserted.
Do a hard reset through your settings.
Flash cwm and put the radio from this link on your sd card. Use cwm to flash the radio.
Flash rom http://forum.xda-developers.com/showthread.php?t=2261598 via odin.
The first try i got an error during flash and got stuck on the software download error screen.
Reflashed the JB rom.
After its flashed flash clockwork recovery.
Enter cwm and do a factory reset. Clear cache. Clear dalvik cache. Reboot system.
If you get service, turn off phone. enter cwm and do a backup.
Reboot system.
It should be working.
If not restart and make sure to do a factory reset through your settings in the phone before reflashing rom.
Got the Phone up and running for about 30 mins.
After battery removed it reverted back to no sim card inserted.
Kept reflashing rom until it worked again.
Flashed cwm.(ClockworK recovery mod)
Deleted cache, dalvik cache
Backed up via cwm
If it reverts back to no sim after that restore using the cwm backup.-it worked for me
Now for the tricky part, my phone was getting crappy service...
So heres what i did to fix it.
Settings-more settings-mobile networks-access point names-click on the apn.
Name-
ATT Phone
APN-
Phone
Proxy-
Not set
Port
Not set
User Name-
Not set
Password-
Not set
Server-
Not set
MMSC-
http://mmsc.mobile.att.net
MMS Proxy-
proxy.mobile.att.net
MMS Port-
80
MCC-
310
MNC-
410
Authentication type-
None
APN type-
default,admin,fota,mms,supl,hipri,internet
APN protocol-
IPv4
Enable/disable APN-
(check mark)
Bearer-
Unspecified
Hope this helps anyone else having this issue.
I believe I've read something like this before. I think they fixed it by starting over from scratch. Try returning to stock thru Odin. Then root and flash rom of choice.
440bro said:
I believe I've read something like this before. I think they fixed it by starting over from scratch. Try returning to stock thru Odin. Then root and flash rom of choice.
Click to expand...
Click to collapse
I Started from scratch via "kies emergency recovery".
No luck.
dweeezy said:
I Started from scratch via "kies emergency recovery".
No luck.
Click to expand...
Click to collapse
did you try rolling back to GB? it could be a bad port on your phone. that was my problem.
Stuck power button. Your pants are too tight.
Theoriginalgiga said:
did you try rolling back to GB? it could be a bad port on your phone. that was my problem.
Click to expand...
Click to collapse
i ordered a new sim port to see if that works. what is gb?
Same situation...finally went to ATT and had a "new" phone sent under warranty. Of course NOW I'm pulling my hair out trying to migrate everything over to the new phone. I rooted and every ROM I try and install aborts. **** me. I don't even know where to start anymore
dweeezy said:
i ordered a new sim port to see if that works. what is gb?
Click to expand...
Click to collapse
GB stands for Gingerbread which was the first version of the OS that came with the phone. I believe the number was 2.3.6 (you can take a look in the about section in the settings and it'll tell you what you're currently running). ICS is Ice Cream Sandwhich which for our phone was 4.0.4 i believe. Jelly bean just came out today which you can use Kies to upgrade to and that I believe is 4.1.2. The numbers don't really mean a think, just the classification of what the OS is so if your phone reads something else (say 2.3.4) assume your phone is right and I'm wrong. I can't remember OS versions to save my life haha.
But you can use Kies to do an emergency recovery and I THINK it'll install Gingerbread. that's where I'd start, then test it, and then move to ICS and test, and then move to JB and test. I know long tedious process, but sometimes it's necessary. Imagine how fun I am to talk to on the phone while troubleshooting a computer :laugh:
redman9 said:
Same situation...finally went to ATT and had a "new" phone sent under warranty. Of course NOW I'm pulling my hair out trying to migrate everything over to the new phone. I rooted and every ROM I try and install aborts. **** me. I don't even know where to start anymore
Click to expand...
Click to collapse
what I use to migrate, and I between roms at least once a week with a full wipe because I rely on my phone being stable.
SMS and call logs: SMS Backup + (saves your call logs and sms to your gmail account. Makes a label for it and everything, pretty sweet. You can also restore from it. it takes about an hour for me to restore at 7000+ text messages).
pictures/media: stored on SD card
apps: if rooted and rommed I use titanium backup and run 2 sets. those which I want to keep my data like sms backup + to make restore easier and those I don't care about the data like google voice. If you're stock, just remember to check the little box in the beginning saying backup this phone to google (or something like that) and the next time you have to restore tick the box that says restore from google (or something like that) and it'll reinstall your apps. Mind you not the info, but it'll give you a head start.
As with your issue with installing roms. If you're using CWM i highly recommend switching to TWRP, not saying it's better in fact I like CWM better, but TWRP is the best for our roms and phone. If you have no clue what I mean by CWM or TWRP, read the all info sticky about how to rom thy phone.
I hope that helps.
Thanks OG. Yes, I know CMW and TWRP. I used to switch ROMs a lot. Finally stuck with Collective's latest (the orange one) pretty happy with it except that it's major glitch seems to be reboots whenever an app updates. So I figured unchecking auto update in Gstore should handle that.
You're saying I should try rooting w Odin again, install Superuser, then use TWRP to flash with? I'll be happy to read another 4 hrs of posts/stickies if that'll get me sorted out. I don't expect people like yourself to spend your day helping me. I'm very thankful for your tips here.
I've poured thru the "All things Gnote" threads and Noob Guides. They can be confusing as they always link out to many different threads. There is hardly ever a "Here are the steps 1. 2. 3. 4. 5.
Thanks again OG.
redman9 said:
Thanks OG. Yes, I know CMW and TWRP. I used to switch ROMs a lot. Finally stuck with Collective's latest (the orange one) pretty happy with it except that it's major glitch seems to be reboots whenever an app updates. So I figured unchecking auto update in Gstore should handle that.
You're saying I should try rooting w Odin again, install Superuser, then use TWRP to flash with? I'll be happy to read another 4 hrs of posts/stickies if that'll get me sorted out. I don't expect people like yourself to spend your day helping me. I'm very thankful for your tips here.
I've poured thru the "All things Gnote" threads and Noob Guides. They can be confusing as they always link out to many different threads. There is hardly ever a "Here are the steps 1. 2. 3. 4. 5.
Thanks again OG.
Click to expand...
Click to collapse
No problem always happy to help. since you're used to this sorta thing you don't need to use odin again and reroot. What you can do is either install TWRP through CWM using this file here:
http://goo.im/devs/OpenRecovery/sgh-i717/openrecovery-twrp-2.5.0.0-quincyatt.zip
Or you can install Goo manager, click settings and select Install OpenRecoveryScript (though that's only 2.4.4.0 the link above is 2.5.0.0)
That should change you over to TWRP. and like always do a nandroid backup and then flash to your heart's content!
fixed!
dweeezy said:
fixed!
Click to expand...
Click to collapse
How ?
galinha said:
How ?
Click to expand...
Click to collapse
i have the same issue.....i kn0w its n0t an hardware issue....my ph0ne is fairly new never dr0pped and this started happening 3 days after i p0rted black star jb alpha
I have this same issues ive tried flashing everything ive tried a new sim and replaced the card reader.
What works consistently for me if to flash the latest modem everytime i have to reboot or boot the note. Its my daughters phone now and she drains the battery regularly if it boots after charging or it needs to be rebooted for whatever reason it will come up with the no sim card error. If i flash the modem thru recovery it will work for that boot but only as long as I dont reboot or shut the phone off, then i will have to flash the modem again.
Not fixed
All. This is not fixed. I am having the same issue and if you follow the guide, it works for a day maybe regardless of what rom is loaded or what modems. Has anyone found a real solution to this yet??
i717 running stock GB or ICS or JB roms...
Thanks!
I have the exact same issue. Replaced the sim/sd card slot and still no dice ): Flashed to stock and back. Nope. Still won't work
Kraize said:
I have the exact same issue. Replaced the sim/sd card slot and still no dice ): Flashed to stock and back. Nope. Still won't work
Click to expand...
Click to collapse
I'm having the same problem. There seems to be no set way to get it back to working. Basically any reboot of the phone produces a no sim card error. I have tried flashing the modem through recovery as it was mentioned that will fix the problem. That did not work for me. What does work, sometimes, is one of the following:
1. Full wipe and reinstall
2. Restore backup from Recovery
3. Fix permissions
I just keep doing one of the above listed and eventually it works. However if the phone reboots then it's back to the carousel of trying these options to get it back to working.
I'm running Padawan JB V2
I honestly have no idea what's causing it. I haven't tried to fix permissions before to fix this issue, but if I go into recovery and install the modem again and reboot, it works fine for a while (and by a while, I mean like a few hours at max).
Just started having this issue, myself...after flashing Tmo_SGH-T989_VKL1_radio_ATTNOTE.zip modem on my phone...restoring from a prior backup...
Restoring a backup will not change your modem.

[Q] No Service After Bad Flash

Hi guys,
I managed to accidentally grab the ATT version of LiquidSmooth and flash it. Since then, I've had strange issues with service. Here's what I've tried:
Flashing (Verizon) versions of CM, LiquidSmooth, and Hyperdrive
Flashing the original and ME7 modems with Heimdall and Odin
Wiping data, system, caches, and fixing permissions before/after every flash
Randomly toggling Mobile Network settings (but I have no idea what I'm doing there)
[*[Searching everywhere I could think of on the forums
I had 0 service on either AOSP ROM I tried. Right now, I'm running Hyperdrive and getting weird results.
Sometimes it asks be to switch to "Global Mode" and shows that I'm roaming.
If I try to call, it says it can't find a mobile network and fails.
After leaving it sitting for a while (right after a clean flash), all the texts I missed came through.
If I try to text somebody, I'm warned that the mobile network is unavailable, but the text still goes through!
4G is working on Hyperdrive. Wifi still works on everything.
com.android.phone crashes when I try change the Network mode away from Global
I'd love to hear any suggestions you guys might have for me. Not sure what I have left to try.... is there a master reset for all of this?
Thanks!
EDIT
Some more details:
About Phone > Status in CM after fresh flash:
Network: Verizon
Signal Strength: 2147483647 (2^31 - 1) dBm, 255 (2 ^ 8 - 1) asu .......WHAT
Mobile network type: CDMA - 1xRTT:7
Service state: In service
Roaming: roaming
Mobile network: Disconnected
My phone number: something completely wrong
MEID, IMEI, ICCID are all there, but don't know how to tell if they're also whacked out
The APNs list is blank and my signal jumps between zero bars and a few bars + roaming. Call and text not working.
I've also attached my PIT file (grabbed with Heimdall). Have no idea how to read it.
Do you have a nandroid backup that includes your EFS partition? If so, I would try restoring it and seeing what happens. Sounds like something got out of whack in there and is giving your phone a hard time doing it's #1 job.
This is what ultimately switched me to the S4, my GNex randomly decided one day that it wasn't going to be a phone anymore, and I didn't have an EFS backup to restore in order to try and fix it.
Two things -
1. Always, always, always, make sure the ROM you are flashing is the correct ROM.
2. Always keep an ODIN file on handy of the full system image, here is the full MDK software, this WILL wipe all of your data - http://www.sxtpdevelopers.com/showthread.php?t=237
Sent from my Nexus 7 using xda premium
woierfere must
grussinko said:
Do you have a nandroid backup that includes your EFS partition? If so, I would try restoring it and seeing what happens. Sounds like something got out of whack in there and is giving your phone a hard time doing it's #1 job.
This is what ultimately switched me to the S4, my GNex randomly decided one day that it wasn't going to be a phone anymore, and I didn't have an EFS backup to restore in order to try and fix it.
Click to expand...
Click to collapse
I don't have a backup. That will definitely be the first thing I do when I get this working again.
gaontr the
Rebel908 said:
Two things -
1. Always, always, always, make sure the ROM you are flashing is the correct ROM.
2. Always keep an ODIN file on handy of the full system image, here is the full MDK software, this WILL wipe all of your data.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
1. I know. LiquidSmooth could have done a better job of linking to the right place on their post, but it was still really dumb on my part.
2. Thanks for this! It looks like I'll be able to try this out tonight (slow connection). The SD card data is safe right? Also, I'm just downloading the tar - not sure what the exe is for.
I haven't used Odin for this since it was on version 1.8 or something (now it's over 3)... it looks like I still just choose the tar from the PDA block and hit go... no specific other settings needed for this phone / flash, right?
No luck :/ . I unzipped the stock restore, flashed in Odin (PDA), and booted fine. I have 4G and texts working, but no calling (mobile network not available) and calling my phone goes straight to voicemail. Also, it's very adamant about keeping me in Global mode over LTE/CDMA. This is the same state I was in earlier while running Hyperdrive, except now I don't have root.
I feel like I've tried everything there is to try. Does anyone have any further suggestions?
Are there any areas of software that don't get reset when flashing the stock images in Odin, and that could have been corrupted from the bad flash?
Thanks.
It's probably also worth mentioning that I'm warned about there being no mobile network when I send texts. I can cancel the dialog and they still go through. People can text me without issues.
espacex said:
No luck :/ . I unzipped the stock restore, flashed in Odin (PDA), and booted fine. I have 4G and texts working, but no calling (mobile network not available) and calling my phone goes straight to voicemail. Also, it's very adamant about keeping me in Global mode over LTE/CDMA. This is the same state I was in earlier while running Hyperdrive, except now I don't have root.
I feel like I've tried everything there is to try. Does anyone have any further suggestions?
Are there any areas of software that don't get reset when flashing the stock images in Odin, and that could have been corrupted from the bad flash?
Thanks.
Click to expand...
Click to collapse
I had the same happen to me when I was working on getting radio on MIUI ROM, after tinkering with the Sprint version, only 4G would work, and occasionally roaming would work. Every time I tried to make a call, it told me there was no mobile network available, and it constantly tried to switch into Global Mode instead of CDMA/LTE.
Sadly, the only thing that worked for me was getting my phone replaced with a brand new one. If you find anything that works please be sure that you post it, because someone else may end up doing the same thing.
Jonestown said:
I had the same happen to me when I was working on getting radio on MIUI ROM, after tinkering with the Sprint version, only 4G would work, and occasionally roaming would work. Every time I tried to make a call, it told me there was no mobile network available, and it constantly tried to switch into Global Mode instead of CDMA/LTE.
Sadly, the only thing that worked for me was getting my phone replaced with a brand new one. If you find anything that works please be sure that you post it, because someone else may end up doing the same thing.
Click to expand...
Click to collapse
Did you get it replaced via warranty? If so, did you need to do anything besides flashing a stock image in Odin beforehand?
Maybe try flashing the stock rooted ME7 that includes the new radios? Couldn't hurt at this point.
Edit: whoops, saw you already tried that
Sent from my SCH-I545 using xda app-developers app
Does anybody know whether ODIN / recovery deletes the partitions before writing new ones? If a file existed in the ATT rom, but not in the Verizon one, would it still be on my phone if I flashed the Verizon rom over the ATT one? Obviously this assumes a data / cache wipe in between. I'm really talking more about the other partitions.
Also, does anyone have any experience trying to get a replacement via warrantee after flashing? I've read all about the binary counter on our model, but didn't see any success / failure stories yet from people returning phones after flashing stock + unrooting.
Last question for now: is there any reason to believe that taking the recent update would help my situation? Maybe that could reset whatever is causing my calling issue.... just a random guess. I know that I'd lose any chance of getting root back (at least for a while).
Thanks again for the help guys!

[Q] No Phone Calls after upgrading to anything past 4.1.2

This seems to be a weird issue that I'm having, and I hope I'm not missing a step...
Anytime I install a custom rom past 4.1.2; I get no phone audio. I can load up web pages fine, SMS/MMS works to my knowledge, but there is no phone audio. I'll call my house phone, and it will ring the house phone, but I cannot hear myself through the other line. I've tried flashing radios/modems, different combination of ROMs and kernels, and the only way I'm able to keep an active phone, that is able to make phone calls, is to stick with a stock ROM.
My first thought is maybe it thinks it's an unlocked phone? And that's causing it to act up, but I've never had an issue like this before. Any help would be appreciated.
tricky_tee said:
This seems to be a weird issue that I'm having, and I hope I'm not missing a step...
Anytime I install a custom rom past 4.1.2; I get no phone audio. I can load up web pages fine, SMS/MMS works to my knowledge, but there is no phone audio. I'll call my house phone, and it will ring the house phone, but I cannot hear myself through the other line. I've tried flashing radios/modems, different combination of ROMs and kernels, and the only way I'm able to keep an active phone, that is able to make phone calls, is to stick with a stock ROM.
My first thought is maybe it thinks it's an unlocked phone? And that's causing it to act up, but I've never had an issue like this before. Any help would be appreciated.
Click to expand...
Click to collapse
I don't believe the kernal is problem
What is your specific device model?
What have you tried to flash exactly?
Who is your carrier?
Are you flashing clean with all wipes?
Are you letting rom settle?
Sent from my SAMSUNG-SGH-I527 using XDA Free mobile app
tricky_tee said:
This seems to be a weird issue that I'm having, and I hope I'm not missing a step...
Anytime I install a custom rom past 4.1.2; I get no phone audio. I can load up web pages fine, SMS/MMS works to my knowledge, but there is no phone audio. I'll call my house phone, and it will ring the house phone, but I cannot hear myself through the other line. I've tried flashing radios/modems, different combination of ROMs and kernels, and the only way I'm able to keep an active phone, that is able to make phone calls, is to stick with a stock ROM.
My first thought is maybe it thinks it's an unlocked phone? And that's causing it to act up, but I've never had an issue like this before. Any help would be appreciated.
Click to expand...
Click to collapse
After u answer captemos questions… let me ask u this. You say stock 4.1.2, do u mean you have actually odin'd the stock release from sammy?
Gil81 said:
After u answer captemos questions… let me ask u this. You say stock 4.1.2, do u mean you have actually odin'd the stock release from sammy?
Click to expand...
Click to collapse
Apologize for the delay - been busy at work. I guess I could've been clearer.
I am using the SGH-i717 on AT&T. By stock, I meant a Touchwiz-based rom (i.e., Padawan JB). I have no problems with making or receiving phone calls. Whenever I flash a ASOP-based rom, (i.e., LiquidSmooth, BeanStalk, etc.) I have intermittent phone issues. The phone issues I'm having is not having audio when making or receiving phone calls. I know that it is actually placing the call, but I cannot hear the person on the other end, nor can they hear me. Now if I go into network operators, and select an operator that I know isn't going to work (i.e, Verizon, or T-Mobile), and then use "Choose Automatically", sometimes that works for a little bit. However, that has been working less and less now.
My process of flashing includes flashing the rom of choice after a full wipe and reset (right now, it's LiquidSmooth 4.4), wiping the cache and dalvik a couple of times, installing Polluti0n's rom patch, wiping cache and dalvik a couple of times, then installing PA Stock 4.4 Gapp, and finishing the whole process by wiping cache and dalvik a few times more. This is all done through gimmeitorilltell's TWRP Recovery 2.8.0.0
As stated before; I have no issues with Touchwiz-Based roms. I can make and receive phone calls with no problems. Also, before I rooted the phone, i updated it through Kies; so I assume that would update it to the latest radio available. That would be my first suspect, but I'm having difficulty finding a flashable radio for the device.
There also might be a step I'm missing, since all my experience previously with rooting and flashing came on CDMA devices, so there was no issues with radios.
tricky_tee said:
Apologize for the delay - been busy at work. I guess I could've been clearer.
I am using the SGH-i717 on AT&T. By stock, I meant a Touchwiz-based rom (i.e., Padawan JB). I have no problems with making or receiving phone calls. Whenever I flash a ASOP-based rom, (i.e., LiquidSmooth, BeanStalk, etc.) I have intermittent phone issues. The phone issues I'm having is not having audio when making or receiving phone calls. I know that it is actually placing the call, but I cannot hear the person on the other end, nor can they hear me. Now if I go into network operators, and select an operator that I know isn't going to work (i.e, Verizon, or T-Mobile), and then use "Choose Automatically", sometimes that works for a little bit. However, that has been working less and less now.
My process of flashing includes flashing the rom of choice after a full wipe and reset (right now, it's LiquidSmooth 4.4), wiping the cache and dalvik a couple of times, installing Polluti0n's rom patch, wiping cache and dalvik a couple of times, then installing PA Stock 4.4 Gapp, and finishing the whole process by wiping cache and dalvik a few times more. This is all done through gimmeitorilltell's TWRP Recovery 2.8.0.0
As stated before; I have no issues with Touchwiz-Based roms. I can make and receive phone calls with no problems. Also, before I rooted the phone, i updated it through Kies; so I assume that would update it to the latest radio available. That would be my first suspect, but I'm having difficulty finding a flashable radio for the device.
There also might be a step I'm missing, since all my experience previously with rooting and flashing came on CDMA devices, so there was no issues with radios.
Click to expand...
Click to collapse
first off i would flash the rom like so.
1. Factory Data reset
2. Wipe Cache/Dalvik
3. Format System/Data
4. Install rom from Sdcard
5. Wipe Cache/Dalvik
6.Reboot device
7.boot back into recovery
8.Wipe Cache/Dalvik
9. Flash gapps
10.Wipe Cache/Dalvik
Check to see if all is well once the rom is flashed and only the rom. Seems like over kill but can help narrowing down the issue, but i do agree with you as kies being the culprit I never did use it let alone trust it to update the device. Odin would be a better choice and no need to update the device for the latest radio as we have flashable zips. Blazes ics modem is what I'm currently using and has been great, one last thing I'd recommend is to go here http://www.sammobile.com/firmwares/ and grab the JB update and flash it via odin if all else fails.
I experiencing a similar symptom. Intermittently, not one can her me no I can hear anyone. I'm currently on Slimkat 4.4.4 and I have to reboot in order to make the call. Never had this problem when on stock JB 4.1.2.
Can some one point me to how to downgrade to Stock 4.1.2. Thinking about going back, I need a reliable phone.
Upgrade Radio
You must get the best radio for your location:
http://forum.xda-developers.com/showthread.php?t=1693545
tricky_tee said:
Apologize for the delay - been busy at work. I guess I could've been clearer.
I am using the SGH-i717 on AT&T. By stock, I meant a Touchwiz-based rom (i.e., Padawan JB). I have no problems with making or receiving phone calls. Whenever I flash a ASOP-based rom, (i.e., LiquidSmooth, BeanStalk, etc.) I have intermittent phone issues. The phone issues I'm having is not having audio when making or receiving phone calls. I know that it is actually placing the call, but I cannot hear the person on the other end, nor can they hear me. Now if I go into network operators, and select an operator that I know isn't going to work (i.e, Verizon, or T-Mobile), and then use "Choose Automatically", sometimes that works for a little bit. However, that has been working less and less now.
My process of flashing includes flashing the rom of choice after a full wipe and reset (right now, it's LiquidSmooth 4.4), wiping the cache and dalvik a couple of times, installing Polluti0n's rom patch, wiping cache and dalvik a couple of times, then installing PA Stock 4.4 Gapp, and finishing the whole process by wiping cache and dalvik a few times more. This is all done through gimmeitorilltell's TWRP Recovery 2.8.0.0
As stated before; I have no issues with Touchwiz-Based roms. I can make and receive phone calls with no problems. Also, before I rooted the phone, i updated it through Kies; so I assume that would update it to the latest radio available. That would be my first suspect, but I'm having difficulty finding a flashable radio for the device.
There also might be a step I'm missing, since all my experience previously with rooting and flashing came on CDMA devices, so there was no issues with radios.
Click to expand...
Click to collapse
follow dzee advice for flashing...rock solid method..but i still would like to know if you were ever on stock unrooted jb 4.1.2
what version of android were you on when you rooted the device the first time.
---------- Post added at 06:19 PM ---------- Previous post was at 06:11 PM ----------
dodgy1 said:
I experiencing a similar symptom. Intermittently, not one can her me no I can hear anyone. I'm currently on Slimkat 4.4.4 and I have to reboot in order to make the call. Never had this problem when on stock JB 4.1.2.
Can some one point me to how to downgrade to Stock 4.1.2. Thinking about going back, I need a reliable phone.
Click to expand...
Click to collapse
follow the li.k above ur original post. dzee gives a li.k to sammobile. download the correct tar file and fladh via odin

Categories

Resources