Q&A for MTK Full Source leaked {MTK65xx}
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for MTK Full Source leaked {MTK65xx}. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
not working
Hi, i have been compiling the source for 918D many times with different configurations ,but cannot get it to boot the generated kernel(zImage) after repacking with android kitchen, the only thing i get is a bootloop, or a freez on the android logo, please help.
Sent from my ALCATEL ONE TOUCH 918D using xda app-developers app
That because they tend to both the source code so people can't build kernels
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.35.7
# Tue Dec 16 15:53:27 2014
Well, I had to download the entire ALPS build environment.
Then download your devices kernel and build it using build.sh , after configuring the environment in the kernel dir.
Afterwards copy the generated kernel...bin file into the baoxue_mytqe-master/kernel/ dir and rename it to kernel_baoxue.bin
then run
./target_build bootimage
you will get your boot.img in /baoxue_mytqe-master/out/target/product/baoxue/boot.image
that's all, I did , but i'll have to look into it deeply to understand what is going on.
Any am a little dissappointed that nobody showed how to do this, or even offered to help.
But I guess the best way is the hardway , compiling it a hundred times, only to figure out that arm-android-eabi doesn't work I found this after trying the original arm-eabi-
But now am
Sent from my ALCATEL ONE TOUCH 918D using xda app-developers app
Is it formtk 6592
Plzz i need kernel sources for redmi note 3g
Sarvesht102 said:
Plzz i need kernel sources for redmi note 3g
Click to expand...
Click to collapse
Dont count on it. This OEM is not known for releasing the source until after the device is too old to do anything with
Hi, brothers.
I can't find anywhere to download this leak - MTK full source MTK65xx.
Can you help me download this?
Thank you in advance.
Hello.
I think that this FTP is OFF.
can you check it??
Best Regards.
Related
Q&A for [APP][BETA]USB Cleaver - USB Password Recovery Tool
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [APP][BETA]USB Cleaver - USB Password Recovery Tool. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
usb cleaver
i installed it in my s3 (4.4)..it says unfortunately, usb cleaver has stopped...i reinstalled it but its of no use
Same here, Xperia Z 4.4.2 stock rooted
this APP i have created a while back is using a very old source which doesn't understand the new SDcard system. i have abandon the project due to some harassment from the original thread. i have not revived the project but due to the amount of questions i am getting in my inbox i will reevaluate the source and see what i can do to fix and import the newer systems.
x3
Crash on start
hello
when ever i run USB cleaver it crashes I have root and the newest version of USB cleaver but I'm running android 4.4.2 could that be the problem?
Please help
reupload payloads may be?
can some1 reupload the payloads? i couldn't find it anymore on the internet
not working
Hi, I have a moto x 2013 running blisspop ROM. I tried both versions of the app up for download the first one goes to a black screen and starts prompting app not responding. The second download does not even launch. Would really like to try this, please update me.
closes right as it opens
Usbcleaver downloaded today may 19 2015 it closes immediately after opening
Can someone please provide the payloads? all sites mentioned in the posts are not reachable anymore.... thx
4.4.4 constantly getting crash massage
App wont start
I have android lollipop 5.1.1 on my rooted nexus 5, I also have Elemantal X kernel installed, and whenever i try to open usb cleaver, it crashes.
I have tried both apk's, and both seem to not work for me.
So, captain, is there any fix for this?
help?
Usb cleaver is not working on lg g3 rooted d855 , not opening ;-; help?
thats not working
if you run this program then your mobile crash
Q&A for K910 & K910e Opensource
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for K910 & K910e Opensource. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Hey crowds, how's going with build? I have tested a little, but this source apparently don't like me, you know, i've downloaded lg g2 source to learn and observe some similar aspects, it's so bigger and kernel & source separated, i don't know if kiton sources are for jb or kk, so many questions...
And you, has make some positive with our kiton? I possibly could help, or learn to...
biggbear82 said:
Hey crowds, how's going with build? I have tested a little, but this source apparently don't like me, you know, i've downloaded lg g2 source to learn and observe some similar aspects, it's so bigger and kernel & source separated, i don't know if kiton sources are for jb or kk, so many questions...
And you, has make some positive with our kiton? I possibly could help, or learn to...
Click to expand...
Click to collapse
Hi
You should follow instruction guide from CyanogenMod, for example for unsupported devices in order to install repro files. This is the correct way to deal with our repository.
It seams, from what you've wrote, that you're trying to mix a G2 with our own roms. That's different.
The Lenovo sources are kk.
Personally i've tried last 2 weeks but always get stuck on the exact moment when the phone should enter and a few bricks along the way and to be honest this week i never try again due to work.
Camera drivers
Hi!
Can you do something to get the Camera drivers (proprietary camera libs and so on), so the new camera APIs on Android 5.1 work (such as manual focus, exposure, etc.)?
help pls
hi.. anyone can help me? my lenovo Vibe z K910L is virus.. everytime is hard reset it all application was still there..
pls help me.. i want to format it like brandnew and no applications
thank you
Q&A for [KERNEL][1,4GHz]Tweaked kernel v2[12/02/2013]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL][1,4GHz]Tweaked kernel v2[12/02/2013]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
link doesnt work
guys link doesnt work. can some one help me?
A hopless try of quality sound
Hi guys!
This is the fourth device I'm tying to kill. But it also wins for now.
I wanted (still hope) to listen music with Fiio E07K DAC over USB.
I've got:
HTC Desire X dual PROTODUG
2.28.401.1 rom
4.1.1 android
3.4.0--ge781ba0 kernel
I've compiled snd-hwdep snd-rawmidi snd-usbmidi-lib snd-usb-audio
They load. When Im connecting one of three USB DACs it reboots with Kernel Panic Unable to handle kernel paging request at virtual address.
And now I'm out of fresh ideas. May be there is a little help here plaese before I through it. Thanks -)
I'm going to try this kernel. But by doing some reading about flashing kernels I really want to confirm some things before attempting to do this.
1. Is this kernel compatible with HTC desire X single sim running jelly bean stock ROM
2. Can I flash this kernel from twrp recovery.
3. Has it got OTG Support.
4. Can I revert back to stock if anything bad occurs.
Also what is the difference between this kernel and infinity kernel v7
Thanks
Sent from my HTC Desire X using XDA Free mobile app
Q&A for Collection of USB Ethernet Drivers [root req]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Collection of USB Ethernet Drivers [root req]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
usb to ethernet driver
Hi friends,
I just joined this forum. I would like to learn and contribute down the road
I am following this thread to enable my samsung android phone do usb to ethernet
http://forum.xda-developers.com/showthread.php?t=2039886
I copied the smsc75xx.ko generated by Brandi into system/lib/modules folder. But when i tried to do insmod or modprobe to load the driver, this is what i get
[email protected]:/system/lib/modules # insmod smsc75xx.ko
insmod: can't insert 'smsc75xx.ko': invalid module format
uname -r returns the following kernel version
3.0.8-perf-T769UVLH5-CL990184
Can you please help me compile for this kernel version? or suggest alternative paths to solve this issue.
I am completely new to android world. Please guide me step by step with examples.
Best Regards,
Hey, that driver was build for the asus tf201. You need to recompile it with a buildchain using your current kernel.
Greets!
Hi Brandi.
Thanks for your response. Could you guide me where to get the buildchain for my compiler? I googled for 3.0.8-perf-T769UVLH5-CL990184 tool but there are no results.
Can you get me started in the android kernel land?
Thanks
brandi said:
Hey, that driver was build for the asus tf201. You need to recompile it with a buildchain using your current kernel.
Greets!
Click to expand...
Click to collapse
Heyho. I don't know how much you are into linux hacking, but this might help: http://forum.xda-developers.com/showthread.php?t=1236576
To say it in short, what you need is your kernels sourcescode (you should get them from your vendor, or the guy how built it here, if it is custom)
and the sourcecode of the ASIX AX88**** driver (e.g. this one https://github.com/MarkLuk/USB_Ethernet_DriverPack)
I don't really know right now what hardware you really have, but you should be able to find the specifications in the wiki.
I would give you my old setup, but I lost it in a hdd crash about a year ago
I hope this helps you at least a little.
greets.
kaaliakahn said:
Hi Brandi.
Thanks for your response. Could you guide me where to get the buildchain for my compiler? I googled for 3.0.8-perf-T769UVLH5-CL990184 tool but there are no results.
Can you get me started in the android kernel land?
Thanks
Click to expand...
Click to collapse
Q&A for [ULTIMATE GUIDE][SC6820/SC8810] All about Spreadtrum
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ULTIMATE GUIDE][SC6820/SC8810] All about Spreadtrum. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
I seek your professional help
First let me congratulate you for all your professional work by opening the knowledge windows for all of us !
I have a serius problem with my Spreadtrum 6820 s9002-b phone.
I've damaged my Android operating system by editing the "build.prop" file for "Fun Fake android version" (yes... that was stupid) I only edited the Android version line from 4.2,1 to 4..4, now when I turn on the device it freezes at the android icon all the time.
My phone doesn't have recovery or fastboot mode, only system test. I've found a stock ROM but, I'm not able to flash it because I can't put it in "USB debug mode" because the phone doesn't boot up.
How can I repair my device? is it death? Am I a device widower?
Thanks for help
PD: I'm sorry for my english
sirmagnum said:
First let me congratulate you for all your professional work by opening the knowledge windows for all of us !
I have a serius problem with my Spreadtrum 6820 s9002-b phone.
I've damaged my Android operating system by editing the "build.prop" file for "Fun Fake android version" (yes... that was stupid) I only edited the Android version line from 4.2,1 to 4..4, now when I turn on the device it freezes at the android icon all the time.
My phone doesn't have recovery or fastboot mode, only system test. I've found a stock ROM but, I'm not able to flash it because I can't put it in "USB debug mode" because the phone doesn't boot up.
How can I repair my device? is it death? Am I a device widower?
Thanks for help
PD: I'm sorry for my english
Click to expand...
Click to collapse
well u dont need to turn on usb debugging mode for flashing stock firmware
u just need proper drivers installed on PC
Any doubt ask me here
Thanks for help
pritish sahoo said:
well u dont need to turn on usb debugging mode for flashing stock firmware
u just need proper drivers installed on PC
Any doubt ask me here
Click to expand...
Click to collapse
Can you guide me? I'm newbie
sirmagnum said:
Can you guide me? I'm newbie
Click to expand...
Click to collapse
better u post in group on FB
my members will help u
Search Micromax A35 Development group
The link is dead.
来自华为荣耀畅玩4C CHM-TL00H -天生急性子 Android 小楼阁