Kind of curious: has anyone tried the G3 with an AirDock:
http://www.theairdock.com/
Wondering if the curved back presents any problems with adhering to the micro-suction surface of the dock.
I have one and the charging works great. Only issue is that if the pad or surface isn't clean the phone doesn't like to stay put. The surface is some kind of nano technology. In my opinion it needs to be improved and the magnets need to be improved. The curved back does limit the overall contact surface area but I am getting a new SUPCASE and I am hoping that the material will stick better.
I have the AirDock, and it does not work with my cheap, Chinese Qi charging sticker. The very same sticker works on my Tylt Vu, however. I'm curious what Qi receiver you guys are using.
Thanks!
I found a couple of posts here on XDA that indicated the magnets in the Air Dock interfere with the Qi stickers. Air Dock (the company) doesn't recommend the mount for use with the G3.
meyerweb said:
I found a couple of posts here on XDA that indicated the magnets in the Air Dock interfere with the Qi stickers. Air Dock (the company) doesn't recommend the mount for use with the G3.
Click to expand...
Click to collapse
Though on their website it clearly says supported (with additional hardware.) I assume this to mean with the QuickCircle charging case, which is horrendous and annoying. You are spot-on regarding the magnets. I asked if those can be removed, and support responded that they are necessary to keep the phone from sliding off. I am not convinced that is the case on the G3, because the phone slides off VERY easily without some sort of flat-back.
Sounds like G3 owners should just wait it out...
Me:
Howdy Howdy!
I noticed that the LG G3 is officially 'supported' (with additional hardware,) on your site, and I was curious if any developments have been made? I am still using the cheap Chinese sticker with my Tylt Vu, but of course that doesn't work on my original AirDock. Is there a recommended charging sticker, or do you guys still recommend the Circle case?
In all honesty, it's hard to recommend the naked G3 on the AirDock, because it can barely hold it. I have to clean my foam almost daily for it to stick, because the phone's back is curved. My friends with flat-back phones never seem to ever clean the foam and it works great.
Thank you!
-Steven
AirDock Support:
Hi Steven,
There are a couple things that are going to be better about Version 2.0 and the G3.
The transmitter in V2.0 will work well with that aftermarket receiver sticker. That's the biggest difference. It's an upgraded transmitter from V1.0
We will also be supplying a special version of V2.0 that will be curved to match the back of your G3 so that you can have the same grip strength as your flat backed phone owning friends!
Thanks
Me:
Whoa, that's awesome! I wish there was a trade-in option because I've been pretty bummed about this one, despite getting a few friends to pick one up for their more well-suited phones.
Thank you for the update!
Sounds great, but I already came up with my own solution. I grafted the Qi charger and phone clamp from this:
http://www.amazon.com/gp/product/B00M685JTG/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1 (made by the same company as the Tylt Vu)
With the sticks-anywhere micro suction base of this:
http://www.amazon.com/iOttie-Windsh...UTF8&qid=1417825105&sr=8-1&keywords=iottie+xl
My only real complaint is that the Qi emits a shrill beeeeep every time it gets power (i.e., when I turn the car on).
But if the Air Dock 2 described above had been available, I probably would have bought that one. Good news for future buyers.
ScrapMaker said:
Sounds like G3 owners should just wait it out...
Me:
Howdy Howdy!
I noticed that the LG G3 is officially 'supported' (with additional hardware,) on your site, and I was curious if any developments have been made? I am still using the cheap Chinese sticker with my Tylt Vu, but of course that doesn't work on my original AirDock. Is there a recommended charging sticker, or do you guys still recommend the Circle case?
In all honesty, it's hard to recommend the naked G3 on the AirDock, because it can barely hold it. I have to clean my foam almost daily for it to stick, because the phone's back is curved. My friends with flat-back phones never seem to ever clean the foam and it works great.
Thank you!
-Steven
AirDock Support:
Hi Steven,
There are a couple things that are going to be better about Version 2.0 and the G3.
The transmitter in V2.0 will work well with that aftermarket receiver sticker. That's the biggest difference. It's an upgraded transmitter from V1.0
We will also be supplying a special version of V2.0 that will be curved to match the back of your G3 so that you can have the same grip strength as your flat backed phone owning friends!
Thanks
Me:
Whoa, that's awesome! I wish there was a trade-in option because I've been pretty bummed about this one, despite getting a few friends to pick one up for their more well-suited phones.
Thank you for the update!
Click to expand...
Click to collapse
I have the original airdock and have been using it with my G3 with no problems. I have a thin ringke case and use the airdock sticker and it charges fine. I'm considering getting the LG g3 slim guard case because I don't like having the sticker on my phone. I read someone on here write that the LG g3 slim guard case sticks to the airdock.
What Qi receiver are you using?
I'm using a replacement battery cover with qi sticker that I bought on Amazon. I'm guessing the company puts the sticker on an oem battery cover but it has qi and nfc
p1garcia said:
I'm using a replacement battery cover with qi sticker that I bought on Amazon. I'm guessing the company puts the sticker on an oem battery cover but it has qi and nfc
Click to expand...
Click to collapse
Strange, then you are the first with an AirDock to get it working with the Qi sticker. I have followed the threads very closely, and even AirDock says it won't work. Do you have a link to the sticker/cover you bought?
Thanks!
I do... But I don't think I can post it. But if you go to Amazon the seller is 38 Ave. It's an oem battery cover with qi and nfc. I also just ordered the LG g3 slim guard case. I've read it works and sticks to the airdock.
I finally received the original LG g3 slim guard case. It is for the US version. It works great with the airdock. Sticks to it and charges it with no issues.
p1garcia said:
I finally received the original LG g3 slim guard case. It is for the US version. It works great with the airdock. Sticks to it and charges it with no issues.
Click to expand...
Click to collapse
When you drive with GPS on, screen on, streaming music over bluetooth, does your battery stay charged? Mine won't even do that with a 2-amp USB connection. :/
ScrapMaker said:
When you drive with GPS on, screen on, streaming music over bluetooth, does your battery stay charged? Mine won't even do that with a 2-amp USB connection. :/
Click to expand...
Click to collapse
Regardless of the input to the Qi charger, current Qi coils output at most 1 amp. But to answer your question, no, mine slowly discharges under the conditions you describe. If you're doing that for a long period, unplug the cable from the dock and plug it into your phone.
meyerweb said:
Regardless of the input to the Qi charger, current Qi coils output at most 1 amp. But to answer your question, no, mine slowly discharges under the conditions you describe. If you're doing that for a long period, unplug the cable from the dock and plug it into your phone.
Click to expand...
Click to collapse
Dang. That's the entire time I've driving -- always. I should have done more research on Qi before ordering the sticker or any of these chargers. My Tylt has an almost impossible time keeping my phone charged when streaming and keeping the screen on at work. Nothing else going. Just heats up like crazy.
ScrapMaker said:
Dang. That's the entire time I've driving -- always. I should have done more research on Qi before ordering the sticker or any of these chargers. My Tylt has an almost impossible time keeping my phone charged when streaming and keeping the screen on at work. Nothing else going. Just heats up like crazy.
Click to expand...
Click to collapse
I don't seem to have any issues when I'm not streaming or using GPS. Just keeping the screen on seems to be fine. Make sure you're using a good USB cable. I found a couple of cheap ones I had wouldn't keep the phone charging consistently - it would keep cycling in and out of charge / discharge modes.
This won't help now, but there's a new Qi standard in development that is supposed to provide higher rates of charge. I do wonder how they'll deal with the extra heat, though.
Related
Hey everyone,
Just received my Air Dock in the mail and I've had mixed results using my Galaxy Note 3 with it. So rather than buying more cases and QI adapters, throwing stuff at the wall hoping something sticks, I thought we could all band together to find the best setup. This should be a thread for people to post their experiences and post links to the cases and wireless charging adapters they are using with the Air Dock and their GN3.
For those of you unfamiliar with the Air Dock, it's a new Indiegogo backed vehicle mount that employs nano-suction and QI wireless charging. It essentially uses a bunch of tiny suction cups (and some magnets apparently) to bond to your phone with out needing any kinds of harnesses or clips. The only issue seems to be that this tech requires some specific stuff to function well. The back of the phone needs to be high gloss plastic for it to stick well and it can't be too thick (i think .8mm is the max for it to still charge). For phones with matte backs (like the Nexus 5) magnets are an option.
Here is the link to the website and plenty of videos and pictures for those who don't know about it: TheAirDock.com
Ok, so I'll start with my setup and experience and hopefully others will follow along to find the best combination of accessories to get the most out of this dock.
Phone: Black Galaxy Note 3 (Verizon)
-I tried it on the dock with no case and while it holds, I'm not very confident in it. I think it may be the texture of the soft touch back. Also there seems to be magnets in it, which I'm not sure there were supposed to be but they are responding to something in the phone
Case: Black Cruzerlite Hybrid Case for Samsung Galaxy Note 3
-Same deal, it sticks to it but it's not inspiring confidence. It's not a high gloss back, so that's probably the issue (bought it well before the Air Dock). The dock also comes with a magnet sticker to place between the case and phone, and that helps but I haven't been able to get it to register a charge at all with the case on.
QI adapter: Wireless Qi Power Receiver Car Charger NFC For Samsung Note 3 N9000 N9005 BC279
-I think this is the part that has created the biggest issue. It's only ever recognized the charger a handful of times, with and without the back cover on. And even when it recognizes it, it just flashes the "now wireless charging" dealy and then goes back to discharging immediately. I know that the adapter works because it charges fine on my desktop QI charging pad.
It holds GN3 securely?
Jc003125 said:
It holds GN3 securely?
Click to expand...
Click to collapse
Not exactly. If i put it on there with no case and like 15 degrees of back lean it holds decently. The backplate isn't as glossy as it needs to be to hold securely though. It's capable of it, they've shown it holding the various Nexus tablets.
That's kind of what this thread is about, trying to find out the best combination of accessories to make this thing work correctly.
Sent from my Galaxy Note 3 via Tapatalk
i'm still waiting on my airdock, but regarding the QI receiver insert charging/discharging deal, have you tried to rotate the airdock 90 degrees? I've ran across QI chargers where orientation matters.
oilfighter said:
i'm still waiting on my airdock, but regarding the QI receiver insert charging/discharging deal, have you tried to rotate the airdock 90 degrees? I've ran across QI chargers where orientation matters.
Click to expand...
Click to collapse
Hmm. I think that's worth a shot. The dock is weird in that the ball joint faces a specific direction, which is different than the prototypes I saw. And if what you say is true, mounting it on the windshield would make the dock upside down. I'll give that a go when I go to my car in the AM.
Sent from my Galaxy Note 3 via Tapatalk
B1gC72 said:
Hmm. I think that's worth a shot. The dock is weird in that the ball joint faces a specific direction, which is different than the prototypes I saw. And if what you say is true, mounting it on the windshield would make the dock upside down. I'll give that a go when I go to my car in the AM.
Sent from my Galaxy Note 3 via Tapatalk
Click to expand...
Click to collapse
an easier way is to not move the dock, and just rotate your phone 90 degrees (vertical vs. horizontal), and see if that helps with the wireless charging.
B1gC72 said:
Hey everyone,
Just received my Air Dock in the mail and I've had mixed results using my Galaxy Note 3 with it. So rather than buying more cases and QI adapters, throwing stuff at the wall hoping something sticks, I thought we could all band together to find the best setup. This should be a thread for people to post their experiences and post links to the cases and wireless charging adapters they are using with the Air Dock and their GN3.
For those of you unfamiliar with the Air Dock, it's a new Indiegogo backed vehicle mount that employs nano-suction and QI wireless charging. It essentially uses a bunch of tiny suction cups (and some magnets apparently) to bond to your phone with out needing any kinds of harnesses or clips. The only issue seems to be that this tech requires some specific stuff to function well. The back of the phone needs to be high gloss plastic for it to stick well and it can't be too thick (i think .8mm is the max for it to still charge). For phones with matte backs (like the Nexus 5) magnets are an option.
Here is the link to the website and plenty of videos and pictures for those who don't know about it: TheAirDock.com
Ok, so I'll start with my setup and experience and hopefully others will follow along to find the best combination of accessories to get the most out of this dock.
Phone: Black Galaxy Note 3 (Verizon)
-I tried it on the dock with no case and while it holds, I'm not very confident in it. I think it may be the texture of the soft touch back. Also there seems to be magnets in it, which I'm not sure there were supposed to be but they are responding to something in the phone
Case: Black Cruzerlite Hybrid Case for Samsung Galaxy Note 3
-Same deal, it sticks to it but it's not inspiring confidence. It's not a high gloss back, so that's probably the issue (bought it well before the Air Dock). The dock also comes with a magnet sticker to place between the case and phone, and that helps but I haven't been able to get it to register a charge at all with the case on.
QI adapter: Wireless Qi Power Receiver Car Charger NFC For Samsung Note 3 N9000 N9005 BC279
-I think this is the part that has created the biggest issue. It's only ever recognized the charger a handful of times, with and without the back cover on. And even when it recognizes it, it just flashes the "now wireless charging" dealy and then goes back to discharging immediately. I know that the adapter works because it charges fine on my desktop QI charging pad.
Click to expand...
Click to collapse
The receiver you have is not a very good one, its rather weak, i had to add another ferrite or flexi magnet to it so that most of my other transmitter can detect it, but if nfc is a must, you have no choice.
oilfighter said:
an easier way is to not move the dock, and just rotate your phone 90 degrees (vertical vs. horizontal), and see if that helps with the wireless charging.
Click to expand...
Click to collapse
So I tried all orientations and no such luck. I think it's the QI adapter.
Sent from my Galaxy Note 3 via Tapatalk
kms108 said:
The receiver you have is not a very good one, its rather weak, i had to add another ferrite or flexi magnet to it so that most of my other transmitter can detect it, but if nfc is a must, you have no choice.
Click to expand...
Click to collapse
Good to know. NFC isn't a must so could you recommend a better QI adapter for the thread?
Sent from my Galaxy Note 3 via Tapatalk
Would also like to report back on the docks performance today. I had my phone on it (in the case) all day with just a small amount of back lean. It held strong on the drive to and from bwork. I also went for some drinks after work and it held strong to and from along a fairly bumpy road. I still want to find a glossy back case but my confidence is growing in the nano suction as is.
I also wanted to report that I put my old Galaxy S1 in it (only phone I have with a glossy back) and it held just like it does in the videos.
Sent from my Galaxy Note 3 via Tapatalk
B1gC72 said:
Good to know. NFC isn't a must so could you recommend a better QI adapter for the thread?
Sent from my Galaxy Note 3 via Tapatalk
Click to expand...
Click to collapse
There is three
nillkin has one with qi/ s view function
http://forum.xda-developers.com/showthread.php?t=2605204
yijieneng
powerqi with copper coil (non nfc)
yijieneng and powerqi shown below.
Hi Guys,
Just to know if I'm the only one experiencing difficulties with my airdock :
I received my items 2 days ago (I have 2 as a friend also ordered one) and test them with 2 Nexus 4 :
Concerning the suction, it's definitily very very good with the N4 and no case, clearly, no risk to have the phone fall while driving !
So, that was the good news ...
The bad one is that the charging is very unreliable on both airdock pads, but with differents effects :
On the first one, it's very difficult for it to be seen charging by the phone, but when it does, it work for several minutes ... and stop working without apparent reasons ...
On the second one, I experiment the same kind of symptoms as described in the first post : the wireless charging is only seen by the phone for something like 1/2s, and then it's off ...
That's quite a disppointment as otherwise, it holds the phone just fine in the car and I found it very convenient. I hope I was just unlucky with mines, or maybe they suffer from transport (the package shows no evidence of it yet ...).
I contacted Greg, the guy from theAirdock.com to have his advices on the matter, but no answer so far ... I was wondering if I'm the only experimenting those issues ?
rogue931 said:
Hi Guys,
Just to know if I'm the only one experiencing difficulties with my airdock :
I received my items 2 days ago (I have 2 as a friend also ordered one) and test them with 2 Nexus 4 :
Concerning the suction, it's definitily very very good with the N4 and no case, clearly, no risk to have the phone fall while driving !
So, that was the good news ...
The bad one is that the charging is very unreliable on both airdock pads, but with differents effects :
On the first one, it's very difficult for it to be seen charging by the phone, but when it does, it work for several minutes ... and stop working without apparent reasons ...
On the second one, I experiment the same kind of symptoms as described in the first post : the wireless charging is only seen by the phone for something like 1/2s, and then it's off ...
That's quite a disppointment as otherwise, it holds the phone just fine in the car and I found it very convenient. I hope I was just unlucky with mines, or maybe they suffer from transport (the package shows no evidence of it yet ...).
I contacted Greg, the guy from theAirdock.com to have his advices on the matter, but no answer so far ... I was wondering if I'm the only experimenting those issues ?
Click to expand...
Click to collapse
You're not the only one, I had similar issues with my Note 3 (actually why I started this thread). I ended up contacting Greg as well and he recommended I purchase a Qi adapter from their site, which did make it function much more reliably. It's acceptable in my opinion at this point but I'm still not 100% sure it's going to charge or stay charging anytime I set it on the AirDock.
Bad news is, my solution isn't really an option with the N4 since (i believe) the wireless charging is built in. I do believe that the Qi charger in the AirDock is generally weak though since I tried about 3 different Qi adapters before finally buying the one from the AirDock site that worked. Otherwise it would do exactly what yours is doing (got both of the things you described with different adapters). I would say try to exchange your docks.
Something that works for me sometimes if it doesn't start charging right away is to unplug the USB cable from the lighter socket side and plug it back in. Also be sure that you are plugged into the 2.1A socket that it comes with, as i found it won't work with the standard 1A plugs most people have laying around.
I really love the concept of the AirDock and I'm glad I backed it but the build quality is certainly suspect. Mine is starting to fall apart after only a few months (the suction pad part is starting to separate from the housing, i can only assume because of how the phone has to be pulled to remove). I think this is par for the course with beta hardware though. Fortunately, customer service was very accommodating in my experience. Hope you're as fortunate.
Yep, actually, I found the thread on the N5 forum after I put my post here. And there indeed seems to be a few complaints with it
I had ne feedback from Greg sincemy email yesterday, but I figure they may be quite busy those days as many people seems to be receiving them.
Well, I hope he will provide a solution, because, for one of the two, with the same symptoms as yours, I can believe it's a problem with positionning, but for the other, the phone start charging for a few minutes and, without it moving, stops ... To me it sounds more like a loose contact somewhere inside the airdock ...
Well, wait'n see, they say ...
I will keep you posted of Greg's answer ..
Any word on how this works with the Note 3's stock "leather" textured back? Is a case required for it to stay?
Also, has anybody tried it with the Samsung brand wireless charger cover? The Air Dock website suggests that the Samsung brand cover is the best wireless charger receiver available; even better than the ones that Air Dock sells.
do you use the Magnetic Sticker?
For the original poster, how did things work out for you in the end? I have a Nexus 5 and it works extremely well with the AirDock because of the smooth back and also because of the magnets. I'm thinking of going to the Note 4. On the AirDock site it does say the textured back of the Note may not stick too well so they recommend using the magnetic sticker. I have one that come with my AirDock and can't imagine putting that on the back of the phone case. I expect it would be pretty damn ugly.
2xbass said:
For the original poster, how did things work out for you in the end? I have a Nexus 5 and it works extremely well with the AirDock because of the smooth back and also because of the magnets. I'm thinking of going to the Note 4. On the AirDock site it does say the textured back of the Note may not stick too well so they recommend using the magnetic sticker. I have one that come with my AirDock and can't imagine putting that on the back of the phone case. I expect it would be pretty damn ugly.
Click to expand...
Click to collapse
I thought for sure I had already posted this response. I ended up getting an AirDock and the OEM Samsung Wireless charging cover for my Note 3. It's been a good setup. I'm not using the ugly sticker. The magnets in the AirDock seem to hold on to some metal in the wireless cover. It isn't as good as a smooth backed device, but it works for the most part. I'm glad I bought it.
That's good to know. Thanks for replying. One way to get a smoother back and increase the adhesion on the AirDock while avoiding the thickness of a case is to get a vinyl wrap although I'm not sure how they would go with the Samsung wireless back since it looks like the shape especially around the camera is slightly different. I have a D-Brand skin on my Nexus 5 and I really love it and it makes the back even smoother. I just got a Note 4 yesterday and have ordered a third-party Qi receiver coil so I'll see how that goes first. Looks like SlickWraps has some nice vinyl skins for the Note 3 and 4.
Also want to report that yesterday I tried my Note 4 with the AirDock using the standard back. At first it did not adhere at all. However I noticed that surface of my AirDock charging pad was pretty dusty. For my Nexus 5 I had been relying mostly on the magnets to hold the phone there. So I cleaned the AirDock with a bit of water as they recommend and the Note 4 holds very securely now. I think if I add a vinyl skin or a very thin case I think it would be even more secure.
Any tried and tested qi car charger (preferable the windscreen suction type)
krisbi said:
Any tried and tested qi car charger (preferable the windscreen suction type)
Click to expand...
Click to collapse
If ordered the AirDock (www.theairdock.com) directly in the USA. You can also pre-order at MobileFun.de hassle-free with respect to German Customs control. I've got another one from Amazon, but I don't like it (and forgot the name).
rknuette said:
If ordered the AirDock (www.theairdock.com) directly in the USA. You can also pre-order at MobileFun.de hassle-free with respect to German Customs control. I've got another one from Amazon, but I don't like it (and forgot the name).
Click to expand...
Click to collapse
That looks neat but the g3 doesn't have the magnets necessary to hook on correct?
There is no need for magnets, the AirDock has some kind of microfoam which "sucks" the Phone to to dock. It works with every clean and even surface. However, with the AirDock comes a self adhesive sticker with little pieces of metal in it you can stick inside the battery cover. This is then some kind of waistbelt and braces. I did'nt use it so far.
If you have a look at their website there is an FAQ with a video showing how to use it and what's in the box.
rknuette said:
There is no need for magnets, the AirDock has some kind of microfoam which "sucks" the Phone to to dock. It works with every clean and even surface. However, with the AirDock comes a self adhesive sticker with little pieces of metal in it you can stick inside the battery cover. This is then some kind of waistbelt and braces. I did'nt use it so far.
If you have a look at their website there is an FAQ with a video showing how to use it and what's in the box.
Click to expand...
Click to collapse
Just wondering if the metal would interfere with nfc. This is the reason I went with the groove 'n snap instead of their one with the magnet.
Well I ordered, we'll see how it works out!
So how did it go then? I'm also considering this for my lg g3
Looks like Tylt is releasing a wireless car charger soon. Pricey, $80 but bet you will be able to get this at discount shortly there after. Have their Vu desk charger and it works great.
http://www.tylt.com/vu-car-wireless-charger/
So like many others I'm sure I thought the Verizon LG G3 included wireless charging. So I bought my Qi charger and put my phone on it only to find out it wouldn't work. I dug a bit deeper into the subject and found someone who had debunked the idea of Verizon leaving the wireless charging feature in the phone.
If you didn't know it, the Verizon LG G3 does not include Qi (or any) wireless charging. I found a replacement for the sticker in the back cover. I've seen others who bought the back cover and sticker for just a bit more aftermarket. But if you want to keep your shinny nice LG back cover this is for you. I bought two and are working great. (have not tested NFC functionality but the pin outs are there and have no reason to think that it doesn't work.
Here is the link. Shipping was decent and quite fast (faster than there projected time frame) I was happy with the purchase and can now Qi the LG G3!
ah, so it seems I'm new here and can't post with the link below. Either go to dealsishop dot com and search for it or piece the url back together.
wwwdealsishopcom/lg-g3-door-nfc-wireless-charging-sticker.html
The NFC works fine.
Just got mine in yesterday. Took about 3 days to get after ordering. Put it on this morning and both qi and NFC work great. It even charged with my case on, which is awesome.
Sent from my VS985 4G using XDA Premium HD app
$4.99 shipping
tcoursey said:
So like many others I'm sure I thought the Verizon LG G3 included wireless charging. So I bought my Qi charger and put my phone on it only to find out it wouldn't work. I dug a bit deeper into the subject and found someone who had debunked the idea of Verizon leaving the wireless charging feature in the phone.
If you didn't know it, the Verizon LG G3 does not include Qi (or any) wireless charging. I found a replacement for the sticker in the back cover. I've seen others who bought the back cover and sticker for just a bit more aftermarket. But if you want to keep your shinny nice LG back cover this is for you. I bought two and are working great. (have not tested NFC functionality but the pin outs are there and have no reason to think that it doesn't work.
Here is the link. Shipping was decent and quite fast (faster than there projected time frame) I was happy with the purchase and can now Qi the LG G3!
ah, so it seems I'm new here and can't post with the link below. Either go to dealsishop dot com and search for it or piece the url back together.
wwwdealsishopcom/lg-g3-door-nfc-wireless-charging-sticker.html
Click to expand...
Click to collapse
I ordered two of them from here. Added the dot for ya. LOL
www.dealsishopcom/lg-g3-door-nfc-wireless-charging-sticker.html
Fast shipping and they work great.
I noticed that the phone gets little warm where you sit it on the Qi Charger but probably normal???
I ordered the back from the same site, the Verizon Black Back cover.
Got it today and nothing, but the back contacts look nothing like the site shows I have attached a photo. Looks like the contacts are not lining up correctly or are not raised enough to meet the back of the phone.
Have emailed the company, hopefully they will make it right.
I just got a sticker off eBay for $10 we will see what happens
I ended up ordering one of these back covers:
LG G3 Verizon VS985 Black Battery Door Back Cover with NFC QI Wireless Charging
Received it today and it works great!
Sent from my LG G3 using Tapatalk
Thanks for this.. I have been looking, reading reviews on Amazon and Ebay. There's two things that bother me about this. This is a flagship, premium phone, one of the best in my opinion. Yesterday, I went to Verizon to see if I could buy one there. 27.99 for the battery door, then 27.99 for the Qi Charger. thats over 50 bucks for something I ordered here for 27.99.. First off, why wasn't this on the phone originally? Secondly, why is Verizon trying to break the bank on something that should have already been standard on the phone? Sadly, I know the answer to the 2nd question. End rant here
Really though, I'm on XDA atleast 5 times a day and really never look at Accessories. Thanks for the great advice!
Finally got mine
Ordered my QI charging kit 2 weeks ago from china, finally got it, paid about $8 for the sticker and charger on ebay, put it on tonight, works great, heres what I got if anyone is interested, like I said, your gonna wait about 2 weeks for it though.... http://www.ebay.com/itm/271668861732?_trksid=p2059210.m2749.l2649&ssPageName=STRK:MEBIDX:IT
mcerk02 said:
Ordered my QI charging kit 2 weeks ago from china, finally got it, paid about $8 for the sticker and charger on ebay, put it on tonight, works great, heres what I got if anyone is interested, like I said, your gonna wait about 2 weeks for it though.... http://www.ebay.com/itm/271668861732?_trksid=p2059210.m2749.l2649&ssPageName=STRK:MEBIDX:IT
Click to expand...
Click to collapse
Hi, I bought the same one, and it works perfectly!
Thanks for the recommendation.
I bought the same one on eBay as well. Wireless charging works great but NFC doesn't work at all. I've contacted the seller to see if I can get a replacement sticker.
Mine doesn't work at all. NFC or wireless charging
asdecker said:
Mine doesn't work at all. NFC or wireless charging
Click to expand...
Click to collapse
I bought 2 of these. Installed the sticker without issue. The charging pad lights up, the phone says it is being wirelessly charged, but it is not. The percentage is actually going down while it says it is charging. Going to try a different charger tonight, but it does the same thing plugged into a computer.
As another poster said the NFC works fine the qi however does not work stock.
Also, I have had a really bad experience with those stickers. I probably bought about 5 and none of them worked. Returned them and received replacements and they still didn't work so, I went ahead and bought a battery door with the nfc and qi functionality built in and that has worked for me. Although the NFC is seemingly not as responsive as it was with the stock back.
If you want to drop some money the slimguard case is pretty cool and includes both, 320 is the US version. Mine took a month to get here. I was lucky with sticker on original back plate but it was a bulky sticker and seemed like back plate barely went back on. Adding a case didn't give the best qi charge rate so I just got slimguard
Zerolemon and NFC/QI stickers
Has anyone had any luck with modding/retro-fitting the zerolemon rugged case/extended battery (http://www.amazon.com/Warranty-Zero..._1_6?s=wireless&ie=UTF8&qid=1426945301&sr=1-6) with one of the Qi stickers? I'm not looking for the wireless charging as much as I am the NFC functionality as the case doesn't have pin-outs for it.
Yes, I have NFC and qi charging working fine with the Zerolemon case & 9000mah battery. I just carefully lined up the connections & affixed the connections part of the sticker to the phone with tape. Then put a small piece of foam on top of the connections to put pressure on the connections when the back cover parts are installed. I put in the battery & laid the coil part of the sticker over the battery. I then snapped the plastic back with the battery cutout carefully over both the battery & the sticker being aware not to break the wires between the connections & the coil when pinching them between the plastic & the top of the battery. A bit of a hack, but as long as you don't remove your battery that often it should hold up just fine.
j36047 said:
Yes, I have NFC and qi charging working fine with the Zerolemon case & 9000mah battery. I just carefully lined up the connections & affixed the connections part of the sticker to the phone with tape. Then put a small piece of foam on top of the connections to put pressure on the connections when the back cover parts are installed. I put in the battery & laid the coil part of the sticker over the battery. I then snapped the plastic back with the battery cutout carefully over both the battery & the sticker being aware not to break the wires between the connections & the coil when pinching them between the plastic & the top of the battery. A bit of a hack, but as long as you don't remove your battery that often it should hold up just fine.
Click to expand...
Click to collapse
Excellent, thank you! I've ordered the stickers and will attempt it soon!
How long does it take for a full charge wirelessly?
Well, I actually don't know exactly because I rarely drain the 9000mah battery all the way down, lol. Under normal use for me, I get down to 50-60% remaining be EOD and 6-7 hours on my Powerbot qi charger has it at full charge when I wake up. What I'd say is that I feel this charges nearly, if not just, as fast as it does plugged into a wall outlet. But, it does depend on the output of the charger/power adapter you are using so YMMV. Good luck putting it all together. This is my first qi charging setup and I am definitely loving not having to plug in as the Zerolemon case with it's added bulk and cover over the charging port made plugging in a tedious task.
Black one in stock now: http://www.mobilefun.com/47945-official-samsung-galaxy-alpha-qi-wireless-charging-cover-black.htm
White one on preorder: http://www.mobilefun.com/47948-official-samsung-galaxy-alpha-qi-wireless-charging-cover-white.htm
For wireless charging how does this exactly work?
It works by induction. You need a special charging station (read: a square box that is resting on your nightstand from now on), where you can put your phone on. You don't have to fiddle with plugs.
The charging station works with a standard USB connection and for your phone you need the above mentioned back cover, with is a complete replacement for the existing backplate. The special back cover contains all the electronics and contact pins to connect with the phones battery.
looks like it make the phone super thick!!! Plus cant use with any cases
jerflash said:
looks like it make the phone super thick!!! Plus cant use with any cases
Click to expand...
Click to collapse
Of course, they have to place the coil somewhere, it's just a sacrifice you have to make for having the convenience. Also most flexable rubber/silicone cases do work because they stretch (I just prefer to go without them for the sake of ruining the design of the phone).
It should be arriving here by end of week and I'll be sure to take a few pics for you guys.
FYI, I have purchased a wireless charging back for every single Samsung device I have ever owned so I have plenty of experience (S3, S4, Note 3, and currently S5)
I was running the wireless charging back on my LG G3 so I have some experience as well. That back only added 1 millimeter to the thickness...I measured it. Just better design. I have the alpha and I'm currently testing next to the iPhone 6. Liking both phones alot. Need to test battery life
Sent from iPhone I'm testing using Tapatalk
The most disappointing thing about the wireless charging back cover, other than its extra thickness which makes it less flush, is on the standard cover, the SAMSUNG logo is shiny and embossed, giving the same effect as the metallic edging. On the wireless charging cover, its matte and flat like a cheap tacky plastic print. Not at all in-keeping with the quality of the rest of the phone.
BunnyKillBot said:
The most disappointing thing about the wireless charging back cover, other than its extra thickness which makes it less flush, is on the standard cover, the SAMSUNG logo is shiny and embossed, giving the same effect as the metallic edging. On the wireless charging cover, its matte and flat like a cheap tacky plastic print. Not at all in-keeping with the quality of the rest of the phone.
Click to expand...
Click to collapse
Hmm this is quite strange, usually Samsung does not cheap out on those wireless charging back covers and try to make it as identical to original as possible (at least on all the models I've used them on). Perhaps they didn't spend as much into this one due to the lack of popularity/demand for this device. Still surprises me though, it should cost cheaper in that case as well.
@jerflash: Actually on the S5 the gain in thickness is almost not noticeable. My dad uses one and switched backcovers and you don't see it.
Inductive coils are super thin copperwires that need next to no room for themselves.
I bought one of these for my note 3 and even though it did give it some weight and thickness, the battery cover was thick enough that the camera lens would not come in contact when places on a flat surface which was nice.
BunnyKillBot said:
The most disappointing thing about the wireless charging back cover, other than its extra thickness which makes it less flush, is on the standard cover, the SAMSUNG logo is shiny and embossed, giving the same effect as the metallic edging. On the wireless charging cover, its matte and flat like a cheap tacky plastic print. Not at all in-keeping with the quality of the rest of the phone.
Click to expand...
Click to collapse
That is the wireless charging cover of the Alpha right? Can you tell me if it has magnets in it for alignment? I'm trying to build a car dock with magnetic attachment like the Nexus 5 and wonder if this cover for the Alpha would let me do that.
---------- Post added at 11:41 PM ---------- Previous post was at 11:16 PM ----------
open1your1eyes0 said:
Of course, they have to place the coil somewhere, it's just a sacrifice you have to make for having the convenience. Also most flexable rubber/silicone cases do work because they stretch (I just prefer to go without them for the sake of ruining the design of the phone).
It should be arriving here by end of week and I'll be sure to take a few pics for you guys.
FYI, I have purchased a wireless charging back for every single Samsung device I have ever owned so I have plenty of experience (S3, S4, Note 3, and currently S5)
Click to expand...
Click to collapse
And/or would you know the answer to my question?
Is anyone using the qi cover with thr Alpha?
imthenachoman said:
Is anyone using the qi cover with thr Alpha?
Click to expand...
Click to collapse
I am. As far as am aware there are no magnets in the cover but a metal plate is there.
open1your1eyes0 said:
I am. As far as am aware there are no magnets in the cover but a metal plate is there.
Click to expand...
Click to collapse
And it works? I emailed Samsung and they told me there are no qi chafgers that work with the Alpha. If youre saying it works I might actually buy it and build a magnetic charger for it so I can dock in my car. Thanks!
They also confirmed thr Alpha has OIS.
imthenachoman said:
And it works? I emailed Samsung and they told me there are no qi chafgers that work with the Alpha. If youre saying it works I might actually buy it and build a magnetic charger for it so I can dock in my car. Thanks!
They also confirmed thr Alpha has OIS.
Click to expand...
Click to collapse
It definitely works (using it daily at work) so whoever you talked to has no idea what they're talking about. Wouldn't be the first time honestly.
That wireless charging cover looks super ugly and so doesn't fit the amazing design of the rest of the pone. Not sure what Samsung was thinking when making such a poor looking charging cover.
imthenachoman said:
And it works? I emailed Samsung and they told me there are no qi chafgers that work with the Alpha. If youre saying it works I might actually buy it and build a magnetic charger for it so I can dock in my car. Thanks!
They also confirmed thr Alpha has OIS.
Click to expand...
Click to collapse
Thay confirmed OIS,i try to find out anywhere this info but I only find in one US site nowhere else
is it possable that Alpha has OIS
Can you shere this info with us m8
Could you please tell me whether the extra thickness of the cover makes it impossible to fit a case over it? I have in mind a flip case.
Samsung do not yet list a wireless charging back on their web site for the Galaxy Alpha. I wonder if this is a picture of the back for the bigger battery.
I got my official wireless charging back. Unfortunately, it does make the phone slightly thicker which means cases are not going to fit over it. I tried a cheap plastic soft case which I thought would stretch enough to fit but it didn't. So I had better not drop my phone.....
Otherwise, the wireless charging works fine with a Nokia DT desktop charger.
When I got my LG G3 and bought the Qi charging backplate for it, I immediately bought this charging mount for my car. With the LG, it worked perfectly. Unfortunately, the coils in the charger are too low for the Turbo 2 to get a charge (even though the charger itself lights up as if the phone is charging, I'm still experiencing battery drain, and the phone doesn't believe it's charging). If I put the phone in upside down, the phone charges, but then the arms of the holster are pressed against the side buttons.
Anyone have a better car Qi charging solution for the Turbo?
https://youtu.be/gGwDbZGq_-c
gotroot801 said:
When I got my LG G3 and bought the Qi charging backplate for it, I immediately bought this charging mount for my car. With the LG, it worked perfectly. Unfortunately, the coils in the charger are too low for the Turbo 2 to get a charge (even though the charger itself lights up as if the phone is charging, I'm still experiencing battery drain, and the phone doesn't believe it's charging). If I put the phone in upside down, the phone charges, but then the arms of the holster are pressed against the side buttons.
Anyone have a better car Qi charging solution for the Turbo?
Click to expand...
Click to collapse
This one works great for me
iOttie HLCRIO132 Easy One Touch Wireless Qi Standard Car Mount Charger for Qi Enabled Devices - Standard Packaging - Black https://www.amazon.com/dp/B00UXS7958/ref=cm_sw_r_em_awd_SlCDwbY35JGTS
Sent from my XT1580 using Tapatalk
evgeny71 said:
This one works great for me
iOttie HLCRIO132 Easy One Touch Wireless Qi Standard Car Mount Charger for Qi Enabled Devices - Standard Packaging - Black https://www.amazon.com/dp/B00UXS7958/ref=cm_sw_r_em_awd_SlCDwbY35JGTS
Sent from my XT1580 using Tapatalk
Click to expand...
Click to collapse
How far out does the arm extend? The Choetech came straight up from the suction cup base, and I have to reach forward a bit to reach the phone - enough so that it feels dangerous while driving on the highway.
I did manage to get the Choetech to start charging the phone by positioning the phone a little higher than normal in the holster, then moving it down, but if the iOttie charges easily from the default position I might consider that if I get some Amazon gift cards this year.
gotroot801 said:
How far out does the arm extend? The Choetech came straight up from the suction cup base, and I have to reach forward a bit to reach the phone - enough so that it feels dangerous while driving on the highway.
I did manage to get the Choetech to start charging the phone by positioning the phone a little higher than normal in the holster, then moving it down, but if the iOttie charges easily from the default position I might consider that if I get some Amazon gift cards this year.
Click to expand...
Click to collapse
It extends for about 1.5 inches, far enough to be where I want it to be at. The lower supporting fork is adjustable. It can move up and down. So I was able to align wireless charging logo of the phone with the coils of the holder. Now I don't have to worry about the position of the phone when it is in the holder. I have two of them, for my wife and myself. And we are both satisfied. There are some videos on that Amazon page about this product. You can check them out.
Sent from my XT1580 using Tapatalk
evgeny71 said:
It extends for about 1.5 inches, far enough to be where I want it to be at. The lower supporting fork is adjustable. It can move up and down. So I was able to align wireless charging logo of the phone with the coils of the holder. Now I don't have to worry about the position of the phone when it is in the holder. I have two of them, for my wife and myself. And we are both satisfied. There are some videos on that Amazon page about this product. You can check them out.
Sent from my XT1580 using Tapatalk
Click to expand...
Click to collapse
Thanks for describing this -- I had been concerned about getting something like this precisely because I was worried about positioning so that 1) the coils would line up with the phone's charging "sweet spot" and 2) the side buttons wouldn't be blocked. Have the bottom support adjustable addresses that beautifully.
jonstrong said:
Thanks for describing this -- I had been concerned about getting something like this precisely because I was worried about positioning so that 1) the coils would line up with the phone's charging "sweet spot" and 2) the side buttons wouldn't be blocked. Have the bottom support adjustable addresses that beautifully.
Click to expand...
Click to collapse
Likewise. Also, the arm extending out slightly puts the phone closer to me, and on my car that would make it as close as the vent clip on the Choetech was.
vader540is said:
https://youtu.be/gGwDbZGq_-c
Click to expand...
Click to collapse
Not gonna work with this phone unless you either stick the Airdock sticker on it or have a case it'll stick to...
mjones73 said:
Not gonna work with this phone unless you either stick the Airdock sticker on it or have a case it'll stick to...
Click to expand...
Click to collapse
you're correct... I use a slim silicone case and the air dock works great.
vader540is said:
you're correct... I use a slim silicone case and the air dock works great.
Click to expand...
Click to collapse
How are you keeping yours sticky? I've washed mine as recommended, my G2 kept falling off it with with the magnetic sticker on my case, don't feel safe with the DT2 because it's heavier.
mjones73 said:
How are you keeping yours sticky? I've washed mine as recommended, my G2 kept falling off it with with the magnetic sticker on my case, don't feel safe with the DT2 because it's heavier.
Click to expand...
Click to collapse
I never wash mine lol
Just received my iOttie, and it is excellent! Thanks again, evgeny71!
For your help, I'll be nice to the next Penguins fan I meet.
gotroot801 said:
Just received my iOttie, and it is excellent! Thanks again, evgeny71!
For your help, I'll be nice to the next Penguins fan I meet.
Click to expand...
Click to collapse
You are welcome! I'm glad I helped!
Sent from my XT1580 using Tapatalk
This is my first phone with wireless charging.
Could someone let me know why QI charging in a car would be preferable to cradle with a built in charger.
I have been using Pro Clip car docks for the last 5 years (3 phones and 2 SUVs) and am happy with them.
I disassembled the USB charger portion of my dock for my old Note3 while I wait for my backordered DT2 cradle to come.
If Qi is better I can cancel my order and get something different.
I see no drain while running Waze and listening to Audio Books though bluetooth. Additionally I mount an NFC tag on there to activate phone actions when I dock my phone.
The charger is hard wired to my car and the mounting system has been rock solid and allows for my Amateur Radio faceplate to be mounted within easy reach right below the phone dock.
On the other hand, the drop in dock doesn't work with a case but they do have other options for universal mounts.
http://www.proclipusa.com/phone-holders/device/motorola/droid-turbo-2.cmsv
evgeny71 said:
This one works great for me
iOttie HLCRIO132 Easy One Touch Wireless Qi Standard Car Mount Charger for Qi Enabled Devices - Standard Packaging - Black
----url edited out because I don't have enough posts---
Sent from my XT1580 using Tapatalk
Click to expand...
Click to collapse
After reading this thread weeks ago, I got this car mount. It is excellent. Works flawlessly and I love not having to connect a cord every time I get in the truck. The push on and one touch release is smooth too.
I was hoping to move from my old window mount spot to the center console but the gap wasn't wide enough for the extra dash mount pad. It is just barely wide enough for the regular suction mount but it doesn't form a complete seal and fell when I tried it. Still the window mount has worked for me for years and this mount comes out a little further than my old bionic mount so that's a big plus.