[Q] Help regarding logcat for MIUIV5 kitkat ROM port 4.4.2 for MTK6592 device

[Q] Help regarding logcat for MIUIV5 kitkat ROM port 4.4.2 for MTK6592 device - Android Q&A, Help & Troubleshooting

Hi Guys
So I tried to port a MIUI V5 4.4.2 ROM to my device and after rebooting after flashing it everytime, I get an unresponisve black screen but device is detected by adb so I can easily boot into recovery. Recovery.log is perfectly clear though no problems during flashing. But this logcat goes way overy my head. Can you guys please help me Don't ignore this thread as I have trying the port since a month and litreally tried all guides, videos, tut's, google etc but didn't end up on a satisfactory guide. No guide could solve the problme. Asked many porting devs still no answer. So lets begin with basic info.
I have XOLO HIVE 8x-1000 MT6592 with 2 GB Ram ( rest specs can be found here - XOLO 8x-1000 Specifications ) and the rom I am trying to port is ELephone P9 ported ROM, MIUI V5 for Elephone P9 which is really same as my device except NFC and CPU clocking as it's 1.7 Ghz and mine is 1.4 Ghz, here specs forELEPHONE P9.
So I assume you must have looked specs of both devices which prove that they are identical in most aspects and I also hope you took a proper look at the ROM I am trying to port as I provided the link. So I asked every person I could from a noob to a dev who can help me but no answer and even no guide on how to port MIUI KK V5 for MTK devices. My logcat is in first post. Please do have a look and reply to it.
EDIT : I am using Windows 7 Ultimate as OS and WinRAR to port and Notepad++ set in UNIX mode to edit all my stuff like updater-script etc and also added logcat.txt if you want to have a look later at offline mode. Please help me. :'(

Here is my logcat now : Part 1
D/libEGL ( 784): loaded /system/lib/egl/libEGL_mali.so
D/libEGL ( 784): loaded /system/lib/egl/libGLESv1_CM_mali.so
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
D/libEGL ( 784): loaded /system/lib/egl/libGLESv2_mali.so
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3003
W/libEGL ( 784): eglInitialize(0x1) failed (EGL_BAD_ALLOC)
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
I/[MALI][Gralloc]( 784): dlopen libsec_mem.so fail
I/gralloc ( 784): [Gralloc] refreshRate = 0, info.pixclock = ffffffff
I/gralloc ( 784): [Gralloc] info.upper_margin = ffffffff, info.lower_margin = f
fffffff
I/gralloc ( 784): [Gralloc] info.yres = 500, info.hsync_len = ffffffff
I/gralloc ( 784): [Gralloc] info.left_margin = ffffffff, info.right_margin = ff
ffffff
I/[MALI][Gralloc]( 784): ro_dpi: 320.000000
I/[MALI][Gralloc]( 784): using (fd=19)
I/[MALI][Gralloc]( 784): id = mtkfb
I/[MALI][Gralloc]( 784): xres = 720 px
I/[MALI][Gralloc]( 784): yres = 1280 px
I/[MALI][Gralloc]( 784): xres_virtual = 720 px
I/[MALI][Gralloc]( 784): yres_virtual = 3840 px
I/[MALI][Gralloc]( 784): bpp = 32
I/[MALI][Gralloc]( 784): r = 16:8
I/[MALI][Gralloc]( 784): g = 8:8
I/[MALI][Gralloc]( 784): b = 0:8
I/[MALI][Gralloc]( 784): width = 57 mm (320.842102 dpi)
I/[MALI][Gralloc]( 784): height = 102 mm (318.745087 dpi)
I/[MALI][Gralloc]( 784): refresh rate = 60.00 Hz
I/[MALI][Gralloc]( 784): init_framebuffer va: 0xb561c000 mva: 0xfeb00000
E/M4U_L ( 784): ioctl MTK_M4U_T_M4UDrv_CONSTRUCT fail! 2, No such file or di
rectory
I/hwcomposer( 784): [DPY] Display Information:
I/hwcomposer( 784): [DPY] # fo devices : 1
I/hwcomposer( 784): [DPY] -----------------------------
I/hwcomposer( 784): [DPY] Device id : 0
I/hwcomposer( 784): [DPY] Width : 720
I/hwcomposer( 784): [DPY] Height : 1280
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/hwcomposer( 784): [DPY] xdpi : 320.000000
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
I/hwcomposer( 784): [DPY] ydpi : 320.000000
I/hwcomposer( 784): [DPY] vsync : 1
I/hwcomposer( 784): [DPY] refresh : 16507097
I/hwcomposer( 784): [DPY] connected : 1
I/hwcomposer( 784): [DPY] subtype : 0
W/hwcomposer( 784): [EVENT] HW VSync State(1)
W/hwcomposer( 784): [EVENT] Start to listen uevent, addr.nl_pid(784)
I/hwcomposer( 784): [WKR] Set priority to RR: 268435543
I/SurfaceFlinger( 784): Using composer version 1.2
I/hwcomposer( 784): [HWC] getConfigs Display(0)
I/hwcomposer( 784): [HWC] getAttributes Display(0)
I/hwcomposer( 784): [WKR] Set priority to RR: 268435543
I/hwcomposer( 784): [WKR] Set priority to RR: 268435543
I/hwcomposer( 784): [HWC] getConfigs Display(1)
I/hwcomposer( 784): [HWC] getAttributes Display(1)
E/hwcomposer( 784): [HWC] Failed to get display attributes (dpy=1 is not connec
ted)
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/SurfaceFlinger( 784): no suitable EGLConfig found, trying a simpler query
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
F/SurfaceFlinger( 784): no suitable EGLConfig found, giving up
F/libc ( 784): Fatal signal 6 (SIGABRT) at 0x00000310 (code=-6), thread 784
(surfaceflinger)
F/libc ( 784): Unable to open connection to debuggerd: Connection refused
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): Netd 1.0 starting
W/InterfaceController( 820): Warning (dlopen failed: library "/system/lib/libne
tcmdiface.so" not found) while opening the net interface command library
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/SurfaceFlinger( 821): [int main(int, char**)] set surfaceflinger is in root u
ser, adjust caps for its thread
I/SurfaceFlinger( 821): SurfaceFlinger is starting
I/SurfaceFlinger( 821): SurfaceFlinger's main thread ready to run. Initializing
graphics H/W...
D/libEGL ( 821): loaded /system/lib/egl/libEGL_mali.so
D/libEGL ( 821): loaded /system/lib/egl/libGLESv1_CM_mali.so
D/libEGL ( 821): loaded /system/lib/egl/libGLESv2_mali.so
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3003
W/libEGL ( 821): eglInitialize(0x1) failed (EGL_BAD_ALLOC)
I/[MALI][Gralloc]( 821): dlopen libsec_mem.so fail
I/gralloc ( 821): [Gralloc] refreshRate = 0, info.pixclock = ffffffff
I/gralloc ( 821): [Gralloc] info.upper_margin = ffffffff, info.lower_margin = f
fffffff
I/gralloc ( 821): [Gralloc] info.yres = 500, info.hsync_len = ffffffff
I/gralloc ( 821): [Gralloc] info.left_margin = ffffffff, info.right_margin = ff
ffffff
I/[MALI][Gralloc]( 821): ro_dpi: 320.000000
I/[MALI][Gralloc]( 821): using (fd=19)
I/[MALI][Gralloc]( 821): id = mtkfb
I/[MALI][Gralloc]( 821): xres = 720 px
I/[MALI][Gralloc]( 821): yres = 1280 px
I/[MALI][Gralloc]( 821): xres_virtual = 720 px
I/[MALI][Gralloc]( 821): yres_virtual = 3840 px
I/[MALI][Gralloc]( 821): bpp = 32
I/[MALI][Gralloc]( 821): r = 16:8
I/[MALI][Gralloc]( 821): g = 8:8
I/[MALI][Gralloc]( 821): b = 0:8
I/[MALI][Gralloc]( 821): width = 57 mm (320.842102 dpi)
I/[MALI][Gralloc]( 821): height = 102 mm (318.745087 dpi)
I/[MALI][Gralloc]( 821): refresh rate = 60.00 Hz
I/[MALI][Gralloc]( 821): init_framebuffer va: 0xb5565000 mva: 0xfeb00000
E/M4U_L ( 821): ioctl MTK_M4U_T_M4UDrv_CONSTRUCT fail! 2, No such file or di
rectory
I/hwcomposer( 821): [DPY] Display Information:
I/hwcomposer( 821): [DPY] # fo devices : 1
I/hwcomposer( 821): [DPY] -----------------------------
I/hwcomposer( 821): [DPY] Device id : 0
I/hwcomposer( 821): [DPY] Width : 720
I/hwcomposer( 821): [DPY] Height : 1280
I/hwcomposer( 821): [DPY] xdpi : 320.000000
I/hwcomposer( 821): [DPY] ydpi : 320.000000
I/hwcomposer( 821): [DPY] vsync : 1
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/hwcomposer( 821): [DPY] refresh : 16507097
I/hwcomposer( 821): [DPY] connected : 1
I/hwcomposer( 821): [DPY] subtype : 0
W/hwcomposer( 821): [EVENT] HW VSync State(1)
W/hwcomposer( 821): [EVENT] Start to listen uevent, addr.nl_pid(821)
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/SurfaceFlinger( 821): Using composer version 1.2
I/hwcomposer( 821): [HWC] getConfigs Display(0)
I/hwcomposer( 821): [HWC] getAttributes Display(0)
I/hwcomposer( 821): [HWC] getConfigs Display(1)
I/hwcomposer( 821): [HWC] getAttributes Display(1)
E/hwcomposer( 821): [HWC] Failed to get display attributes (dpy=1 is not connec
ted)
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/SurfaceFlinger( 821): no suitable EGLConfig found, trying a simpler query
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
F/SurfaceFlinger( 821): no suitable EGLConfig found, giving up
F/libc ( 821): Fatal signal 6 (SIGABRT) at 0x00000335 (code=-6), thread 821
(surfaceflinger)
F/libc ( 821): Unable to open connection to debuggerd: Connection refused
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/sn ( 191): Retry 5
I/sn ( 191): Fail to access err=No such file or directory
I/sn ( 191): Fail to access err=No such file or directory
I/sn ( 191): Fail to access err=No such file or directory
I/sn ( 191): Check all possible paths
I/Netd ( 858): Netd 1.0 starting
W/InterfaceController( 858): Warning (dlopen failed: library "/system/lib/libne
tcmdiface.so" not found) while opening the net interface command library
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
D/ADB_SERVICES( 198): adb fdevent_process list (12) (18)
D/ADB_SERVICES( 198): adb socket read list (18)
D/ADB_SERVICES( 198): read_data=11945
D/ADB_SERVICES( 198): max_read_time=0.000080 max_send_time=0.000063
D/ADB_SERVICES( 198): adb local_socket_ready list (18)
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/SurfaceFlinger( 859): [int main(int, char**)] set surfaceflinger is in root u
ser, adjust caps for its thread
I/SurfaceFlinger( 859): SurfaceFlinger is starting
I/SurfaceFlinger( 859): SurfaceFlinger's main thread ready to run. Initializing
graphics H/W...
D/libEGL ( 859): loaded /system/lib/egl/libEGL_mali.so
D/libEGL ( 859): loaded /system/lib/egl/libGLESv1_CM_mali.so
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
D/libEGL ( 859): loaded /system/lib/egl/libGLESv2_mali.so
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3003
W/libEGL ( 859): eglInitialize(0x1) failed (EGL_BAD_ALLOC)
I/[MALI][Gralloc]( 859): dlopen libsec_mem.so fail
I/gralloc ( 859): [Gralloc] refreshRate = 0, info.pixclock = ffffffff
I/gralloc ( 859): [Gralloc] info.upper_margin = ffffffff, info.lower_margin = f
fffffff
I/gralloc ( 859): [Gralloc] info.yres = 500, info.hsync_len = ffffffff
I/gralloc ( 859): [Gralloc] info.left_margin = ffffffff, info.right_margin = ff
ffffff
I/[MALI][Gralloc]( 859): ro_dpi: 320.000000
I/[MALI][Gralloc]( 859): using (fd=19)
I/[MALI][Gralloc]( 859): id = mtkfb
I/[MALI][Gralloc]( 859): xres = 720 px
I/[MALI][Gralloc]( 859): yres = 1280 px
I/[MALI][Gralloc]( 859): xres_virtual = 720 px
I/[MALI][Gralloc]( 859): yres_virtual = 3840 px
I/[MALI][Gralloc]( 859): bpp = 32
I/[MALI][Gralloc]( 859): r = 16:8
I/[MALI][Gralloc]( 859): g = 8:8
I/[MALI][Gralloc]( 859): b = 0:8
I/[MALI][Gralloc]( 859): width = 57 mm (320.842102 dpi)
I/[MALI][Gralloc]( 859): height = 102 mm (318.745087 dpi)
I/[MALI][Gralloc]( 859): refresh rate = 60.00 Hz
I/[MALI][Gralloc]( 859): init_framebuffer va: 0xb55c4000 mva: 0xfeb00000
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter

Logcat Part 2
E/M4U_L ( 859): ioctl MTK_M4U_T_M4UDrv_CONSTRUCT fail! 2, No such file or di
rectory
I/hwcomposer( 859): [DPY] Display Information:
I/hwcomposer( 859): [DPY] # fo devices : 1
I/hwcomposer( 859): [DPY] -----------------------------
I/hwcomposer( 859): [DPY] Device id : 0
I/hwcomposer( 859): [DPY] Width : 720
I/hwcomposer( 859): [DPY] Height : 1280
I/hwcomposer( 859): [DPY] xdpi : 320.000000
I/hwcomposer( 859): [DPY] ydpi : 320.000000
I/hwcomposer( 859): [DPY] vsync : 1
I/hwcomposer( 859): [DPY] refresh : 16507097
I/hwcomposer( 859): [DPY] connected : 1
I/hwcomposer( 859): [DPY] subtype : 0
W/hwcomposer( 859): [EVENT] HW VSync State(1)
W/hwcomposer( 859): [EVENT] Start to listen uevent, addr.nl_pid(859)
I/hwcomposer( 859): [WKR] Set priority to RR: 268435543
I/hwcomposer( 859): [WKR] Set priority to RR: 268435543
I/hwcomposer( 859): [WKR] Set priority to RR: 268435543
I/hwcomposer( 859): [WKR] Set priority to RR: 268435543
I/SurfaceFlinger( 859): Using composer version 1.2
I/hwcomposer( 859): [HWC] getConfigs Display(0)
I/hwcomposer( 859): [HWC] getAttributes Display(0)
I/hwcomposer( 859): [HWC] getConfigs Display(1)
I/hwcomposer( 859): [HWC] getAttributes Display(1)
E/hwcomposer( 859): [HWC] Failed to get display attributes (dpy=1 is not connec
ted)
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/SurfaceFlinger( 859): no suitable EGLConfig found, trying a simpler query
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
F/SurfaceFlinger( 859): no suitable EGLConfig found, giving up
F/libc ( 859): Fatal signal 6 (SIGABRT) at 0x0000035b (code=-6), thread 859
(surfaceflinger)
F/libc ( 859): Unable to open connection to debuggerd: Connection refused
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/iptables( 858): iptables: Chain already exists.
I/iptables( 858): iptables terminated by exit(1)
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
E/Netd ( 858): exec() res=0, status=256 for /system/bin/iptables -t filter -
N firewall
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/ip6tables( 858): ip6tables: Chain already exists.
I/ip6tables( 858): ip6tables terminated by exit(1)
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
E/Netd ( 858): exec() res=0, status=256 for /system/bin/ip6tables -t filter
-N firewall
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
D/libEGL ( 784): loaded /system/lib/egl/libEGL_mali.so
D/libEGL ( 784): loaded /system/lib/egl/libGLESv1_CM_mali.so
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
D/libEGL ( 784): loaded /system/lib/egl/libGLESv2_mali.so
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3003
W/libEGL ( 784): eglInitialize(0x1) failed (EGL_BAD_ALLOC)
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
I/[MALI][Gralloc]( 784): dlopen libsec_mem.so fail
I/gralloc ( 784): [Gralloc] refreshRate = 0, info.pixclock = ffffffff
I/gralloc ( 784): [Gralloc] info.upper_margin = ffffffff, info.lower_margin = f
fffffff
I/gralloc ( 784): [Gralloc] info.yres = 500, info.hsync_len = ffffffff
I/gralloc ( 784): [Gralloc] info.left_margin = ffffffff, info.right_margin = ff
ffffff
I/[MALI][Gralloc]( 784): ro_dpi: 320.000000
I/[MALI][Gralloc]( 784): using (fd=19)
I/[MALI][Gralloc]( 784): id = mtkfb
I/[MALI][Gralloc]( 784): xres = 720 px
I/[MALI][Gralloc]( 784): yres = 1280 px
I/[MALI][Gralloc]( 784): xres_virtual = 720 px
I/[MALI][Gralloc]( 784): yres_virtual = 3840 px
I/[MALI][Gralloc]( 784): bpp = 32
I/[MALI][Gralloc]( 784): r = 16:8
I/[MALI][Gralloc]( 784): g = 8:8
I/[MALI][Gralloc]( 784): b = 0:8
I/[MALI][Gralloc]( 784): width = 57 mm (320.842102 dpi)
I/[MALI][Gralloc]( 784): height = 102 mm (318.745087 dpi)
I/[MALI][Gralloc]( 784): refresh rate = 60.00 Hz
I/[MALI][Gralloc]( 784): init_framebuffer va: 0xb561c000 mva: 0xfeb00000
E/M4U_L ( 784): ioctl MTK_M4U_T_M4UDrv_CONSTRUCT fail! 2, No such file or di
rectory
I/hwcomposer( 784): [DPY] Display Information:
I/hwcomposer( 784): [DPY] # fo devices : 1
I/hwcomposer( 784): [DPY] -----------------------------
I/hwcomposer( 784): [DPY] Device id : 0
I/hwcomposer( 784): [DPY] Width : 720
I/hwcomposer( 784): [DPY] Height : 1280
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/hwcomposer( 784): [DPY] xdpi : 320.000000
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
I/hwcomposer( 784): [DPY] ydpi : 320.000000
I/hwcomposer( 784): [DPY] vsync : 1
I/hwcomposer( 784): [DPY] refresh : 16507097
I/hwcomposer( 784): [DPY] connected : 1
I/hwcomposer( 784): [DPY] subtype : 0
W/hwcomposer( 784): [EVENT] HW VSync State(1)
W/hwcomposer( 784): [EVENT] Start to listen uevent, addr.nl_pid(784)
I/hwcomposer( 784): [WKR] Set priority to RR: 268435543
I/SurfaceFlinger( 784): Using composer version 1.2
I/hwcomposer( 784): [HWC] getConfigs Display(0)
I/hwcomposer( 784): [HWC] getAttributes Display(0)
I/hwcomposer( 784): [WKR] Set priority to RR: 268435543
I/hwcomposer( 784): [WKR] Set priority to RR: 268435543
I/hwcomposer( 784): [HWC] getConfigs Display(1)
I/hwcomposer( 784): [HWC] getAttributes Display(1)
E/hwcomposer( 784): [HWC] Failed to get display attributes (dpy=1 is not connec
ted)
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/SurfaceFlinger( 784): no suitable EGLConfig found, trying a simpler query
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
F/SurfaceFlinger( 784): no suitable EGLConfig found, giving up
F/libc ( 784): Fatal signal 6 (SIGABRT) at 0x00000310 (code=-6), thread 784
(surfaceflinger)
F/libc ( 784): Unable to open connection to debuggerd: Connection refused
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): Netd 1.0 starting
W/InterfaceController( 820): Warning (dlopen failed: library "/system/lib/libne
tcmdiface.so" not found) while opening the net interface command library
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/SurfaceFlinger( 821): [int main(int, char**)] set surfaceflinger is in root u
ser, adjust caps for its thread
I/SurfaceFlinger( 821): SurfaceFlinger is starting
I/SurfaceFlinger( 821): SurfaceFlinger's main thread ready to run. Initializing
graphics H/W...
D/libEGL ( 821): loaded /system/lib/egl/libEGL_mali.so
D/libEGL ( 821): loaded /system/lib/egl/libGLESv1_CM_mali.so
D/libEGL ( 821): loaded /system/lib/egl/libGLESv2_mali.so
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3003
W/libEGL ( 821): eglInitialize(0x1) failed (EGL_BAD_ALLOC)
I/[MALI][Gralloc]( 821): dlopen libsec_mem.so fail
I/gralloc ( 821): [Gralloc] refreshRate = 0, info.pixclock = ffffffff
I/gralloc ( 821): [Gralloc] info.upper_margin = ffffffff, info.lower_margin = f
fffffff
I/gralloc ( 821): [Gralloc] info.yres = 500, info.hsync_len = ffffffff
I/gralloc ( 821): [Gralloc] info.left_margin = ffffffff, info.right_margin = ff
ffffff
I/[MALI][Gralloc]( 821): ro_dpi: 320.000000
I/[MALI][Gralloc]( 821): using (fd=19)
I/[MALI][Gralloc]( 821): id = mtkfb
I/[MALI][Gralloc]( 821): xres = 720 px
I/[MALI][Gralloc]( 821): yres = 1280 px
I/[MALI][Gralloc]( 821): xres_virtual = 720 px
I/[MALI][Gralloc]( 821): yres_virtual = 3840 px
I/[MALI][Gralloc]( 821): bpp = 32
I/[MALI][Gralloc]( 821): r = 16:8
I/[MALI][Gralloc]( 821): g = 8:8
I/[MALI][Gralloc]( 821): b = 0:8
I/[MALI][Gralloc]( 821): width = 57 mm (320.842102 dpi)
I/[MALI][Gralloc]( 821): height = 102 mm (318.745087 dpi)
I/[MALI][Gralloc]( 821): refresh rate = 60.00 Hz
I/[MALI][Gralloc]( 821): init_framebuffer va: 0xb5565000 mva: 0xfeb00000
E/M4U_L ( 821): ioctl MTK_M4U_T_M4UDrv_CONSTRUCT fail! 2, No such file or di
rectory
I/hwcomposer( 821): [DPY] Display Information:
I/hwcomposer( 821): [DPY] # fo devices : 1
I/hwcomposer( 821): [DPY] -----------------------------
I/hwcomposer( 821): [DPY] Device id : 0
I/hwcomposer( 821): [DPY] Width : 720
I/hwcomposer( 821): [DPY] Height : 1280
I/hwcomposer( 821): [DPY] xdpi : 320.000000
I/hwcomposer( 821): [DPY] ydpi : 320.000000
I/hwcomposer( 821): [DPY] vsync : 1
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/hwcomposer( 821): [DPY] refresh : 16507097
I/hwcomposer( 821): [DPY] connected : 1
I/hwcomposer( 821): [DPY] subtype : 0
W/hwcomposer( 821): [EVENT] HW VSync State(1)
W/hwcomposer( 821): [EVENT] Start to listen uevent, addr.nl_pid(821)
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/SurfaceFlinger( 821): Using composer version 1.2
I/hwcomposer( 821): [HWC] getConfigs Display(0)
I/hwcomposer( 821): [HWC] getAttributes Display(0)
I/hwcomposer( 821): [HWC] getConfigs Display(1)
I/hwcomposer( 821): [HWC] getAttributes Display(1)
E/hwcomposer( 821): [HWC] Failed to get display attributes (dpy=1 is not connec
ted)
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/SurfaceFlinger( 821): no suitable EGLConfig found, trying a simpler query
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
F/SurfaceFlinger( 821): no suitable EGLConfig found, giving up
F/libc ( 821): Fatal signal 6 (SIGABRT) at 0x00000335 (code=-6), thread 821
(surfaceflinger)
F/libc ( 821): Unable to open connection to debuggerd: Connection refused
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/sn ( 191): Retry 5
I/sn ( 191): Fail to access err=No such file or directory
I/sn ( 191): Fail to access err=No such file or directory
I/sn ( 191): Fail to access err=No such file or directory
I/sn ( 191): Check all possible paths
I/Netd ( 858): Netd 1.0 starting
W/InterfaceController( 858): Warning (dlopen failed: library "/system/lib/libne
tcmdiface.so" not found) while opening the net interface command library
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
D/ADB_SERVICES( 198): adb fdevent_process list (12) (18)
D/ADB_SERVICES( 198): adb socket read list (18)
D/ADB_SERVICES( 198): read_data=11945
D/ADB_SERVICES( 198): max_read_time=0.000080 max_send_time=0.000063
D/ADB_SERVICES( 198): adb local_socket_ready list (18)
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/SurfaceFlinger( 859): [int main(int, char**)] set surfaceflinger is in root u
ser, adjust caps for its thread
I/SurfaceFlinger( 859): SurfaceFlinger is starting
I/SurfaceFlinger( 859): SurfaceFlinger's main thread ready to run. Initializing
graphics H/W...
D/libEGL ( 859): loaded /system/lib/egl/libEGL_mali.so
D/libEGL ( 859): loaded /system/lib/egl/libGLESv1_CM_mali.so
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
D/libEGL ( 859): loaded /system/lib/egl/libGLESv2_mali.so
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3003
W/libEGL ( 859): eglInitialize(0x1) failed (EGL_BAD_ALLOC)
I/[MALI][Gralloc]( 859): dlopen libsec_mem.so fail
I/gralloc ( 859): [Gralloc] refreshRate = 0, info.pixclock = ffffffff
I/gralloc ( 859): [Gralloc] info.upper_margin = ffffffff, info.lower_margin = f
fffffff
I/gralloc ( 859): [Gralloc] info.yres = 500, info.hsync_len = ffffffff
I/gralloc ( 859): [Gralloc] info.left_margin = ffffffff, info.right_margin = ff
ffffff
I/[MALI][Gralloc]( 859): ro_dpi: 320.000000
I/[MALI][Gralloc]( 859): using (fd=19)
I/[MALI][Gralloc]( 859): id = mtkfb
I/[MALI][Gralloc]( 859): xres = 720 px
I/[MALI][Gralloc]( 859): yres = 1280 px
I/[MALI][Gralloc]( 859): xres_virtual = 720 px
I/[MALI][Gralloc]( 859): yres_virtual = 3840 px
I/[MALI][Gralloc]( 859): bpp = 32
I/[MALI][Gralloc]( 859): r = 16:8
I/[MALI][Gralloc]( 859): g = 8:8
I/[MALI][Gralloc]( 859): b = 0:8
I/[MALI][Gralloc]( 859): width = 57 mm (320.842102 dpi)
I/[MALI][Gralloc]( 859): height = 102 mm (318.745087 dpi)
I/[MALI][Gralloc]( 859): refresh rate = 60.00 Hz
I/[MALI][Gralloc]( 859): init_framebuffer va: 0xb55c4000 mva: 0xfeb00000
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
E/M4U_L ( 859): ioctl MTK_M4U_T_M4UDrv_CONSTRUCT fail! 2, No such file or di
rectory
I/hwcomposer( 859): [DPY] Display Information:
I/hwcomposer( 859): [DPY] # fo devices : 1
I/hwcomposer( 859): [DPY] -----------------------------
I/hwcomposer( 859): [DPY] Device id : 0
I/hwcomposer( 859): [DPY] Width : 720
I/hwcomposer( 859): [DPY] Height : 1280
I/hwcomposer( 859): [DPY] xdpi : 320.000000
I/hwcomposer( 859): [DPY] ydpi : 320.000000
I/hwcomposer( 859): [DPY] vsync : 1
I/hwcomposer( 859): [DPY] refresh : 16507097
I/hwcomposer( 859): [DPY] connected : 1
I/hwcomposer( 859): [DPY] subtype : 0
W/hwcomposer( 859): [EVENT] HW VSync State(1)
W/hwcomposer( 859): [EVENT] Start to listen uevent, addr.nl_pid(859)
I/hwcomposer( 859): [WKR] Set priority to RR: 268435543
I/hwcomposer( 859): [WKR] Set priority to RR: 268435543
I/hwcomposer( 859): [WKR] Set priority to RR: 268435543
I/hwcomposer( 859): [WKR] Set priority to RR: 268435543
I/SurfaceFlinger( 859): Using composer version 1.2
I/hwcomposer( 859): [HWC] getConfigs Display(0)
I/hwcomposer( 859): [HWC] getAttributes Display(0)
I/hwcomposer( 859): [HWC] getConfigs Display(1)
I/hwcomposer( 859): [HWC] getAttributes Display(1)
E/hwcomposer( 859): [HWC] Failed to get display attributes (dpy=1 is not connec
ted)
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/SurfaceFlinger( 859): no suitable EGLConfig found, trying a simpler query
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
F/SurfaceFlinger( 859): no suitable EGLConfig found, giving up
F/libc ( 859): Fatal signal 6 (SIGABRT) at 0x0000035b (code=-6), thread 859
(surfaceflinger)
F/libc ( 859): Unable to open connection to debuggerd: Connection refused
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/iptables( 858): iptables: Chain already exists.
I/iptables( 858): iptables terminated by exit(1)
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
E/Netd ( 858): exec() res=0, status=256 for /system/bin/iptables -t filter -
N firewall
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/ip6tables( 858): ip6tables: Chain already exists.
I/ip6tables( 858): ip6tables terminated by exit(1)
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
E/Netd ( 858): exec() res=0, status=256 for /system/bin/ip6tables -t filter
-N firewall
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
[/SIZE][/B]
Now please help me! As I am clueless where to begin or where to end! :crying::silly:

Fixed it
Moderator please close this thread
Sent from my bobobibi

Tech N You said:
Fixed it
Moderator please close this thread
Click to expand...
Click to collapse
How did you fix it?

Bormental said:
How did you fix it?
Click to expand...
Click to collapse
LIBEGL errors are gpu ones.
I replaced libmali.so and it worked
Sent from 8x-1000 Using XXX ROM (Xceptional XPERIA Xperiance)

Tech N You said:
LIBEGL errors are gpu ones.
I replaced libmali.so and it worked
Click to expand...
Click to collapse
it works. Thank you!

Bormental said:
it works. Thank you!
Click to expand...
Click to collapse
Glad I helped you
Sent from 8x-1000 Using XXX ROM (Xceptional XPERIA Xperiance)

Related

Need help with WIFI & BT

Hi all, want to congratulate you on this forum, I hope you can help me.
Recently bought this "SGP 5.0 YP-70" from Amazon and am very pleased, but after two weeks of use, suddenly stopped working the WiFi and BT, I have dealt with several networks and definitely nothing. Update to 2.3.6, then downgrade to 2.2.2, rooting, unrooting, I'm thinking it's a hardware problem, someone has had a similar fault? I can not return it for warranty because the shipping (Venezuela) would cost more than a new one. I would appreciate any suggestions.
:crying:

try flush Dalvik cache and cache partition
if dont help, get logcat, try to turn on wifi and bt and show us those logs

Arlicc said:
try flush Dalvik cache and cache partition
if dont help, get logcat, try to turn on wifi and bt and show us those logs
Click to expand...
Click to collapse
Do not work.
Apreciate your help
The logcat:
# logcat *:E
E/WifiSettingButton( 239): activate()
E/WifiHW ( 121): DRV_AP_MODULE_ARG.
E/WifiHW ( 121): WIFI_CONF_PATH. /system/etc/wifi/wifi.conf
E/WifiHW ( 121): DRIVER_MODULE_PATH. /lib/modules/dhd.ko
E/WifiHW ( 121): insmod load_file "/lib/modules/dhd.ko"
E/WifiSettingButton( 239): onReceive()-S:2
E/WifiHW ( 121): wifi_start_supplicant: pi->serial=117440522, serial=0
E/WifiHW ( 121): wifi_connect_to_supplicant:IFACE_DIR(/data/misc/wifi), iface(eth0), ifname(/data/misc/wifi/eth0)
E/WifiHW ( 121): wifi_connect_to_supplicant: ifname(/data/misc/wifi/eth0)
E/WifiHW ( 121): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/wpa_supplicant( 2865): Line 1: unknown global field ''.
E/wpa_supplicant( 2865): Line 1: Invalid configuration line ''.
E/wpa_supplicant( 2865): Line 325: unknown global field 'proactive_key_caching=1'.
E/wpa_supplicant( 2865): Line 325: Invalid configuration line 'proactive_key_caching=1'.
E/WifiSettingButton( 239): onReceive()-S:3
E/wpa_supplicant( 2865): ioctl[SIOCGIFFLAGS]
E/wpa_supplicant( 2865): ioctl[SIOCSIWPMKSA]
E/wpa_supplicant( 2865): ioctl[SIOCSIWMODE]
E/wpa_supplicant( 2865): ioctl[SIOCGIRANGE]
E/wpa_supplicant( 2865): ioctl[SIOCGIWMODE]
E/wpa_supplicant( 2865): ioctl[SIOCSIWAP]
E/wpa_supplicant( 2865): ioctl[SIOCSIWENCODEEXT]
E/wpa_supplicant( 2865): ioctl[SIOCSIWENCODE]
E/wpa_supplicant( 2865): ioctl[SIOCSIWENCODEEXT]
E/wpa_supplicant( 2865): ioctl[SIOCSIWENCODE]
E/wpa_supplicant( 2865): ioctl[SIOCSIWENCODEEXT]
E/wpa_supplicant( 2865): ioctl[SIOCSIWENCODE]
E/wpa_supplicant( 2865): ioctl[SIOCSIWENCODEEXT]
E/wpa_supplicant( 2865): ioctl[SIOCSIWENCODE]
E/wpa_supplicant( 2865): Failed to disable WPA in the driver.
E/wpa_supplicant( 2865): ioctl[SIOCGIWMODE]
E/wpa_supplicant( 2865): ioctl[SIOCSIWAP]
E/wpa_supplicant( 2865): ioctl[SIOCGIFFLAGS]
E/WifiHW ( 121): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 121): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 121): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 121): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 121): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 121): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 121): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 121): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 121): wifi_connect_to_supplicant:ctrl_conn is NULL!!
E/WifiHW ( 121): wifi_connect_to_supplicant: Unable to open connection to supplicant on "/data/misc/wifi/eth0": No such file or directory
E/WifiHW ( 121): wifi_connect_to_supplicant: Supplicant is not running, cannot connect
E/WifiHW ( 121): wifi_connect_to_supplicant: Supplicant is not running, cannot connect
E/WifiHW ( 121): wifi_connect_to_supplicant: Supplicant is not running, cannot connect
E/WifiSettingButton( 239): onReceive()-S:0
E/WifiHW ( 121): [WIFI] Unload Driver
E/WifiSettingButton( 239): onReceive()-S:1
E/AxT9IME ( 246): WordSymbInit: 1
E/BluetoothSettingButton( 239): activate()
E/BluetoothSettingButton( 239): onReceive()-S:11
E/BTL-SERVER( 4031): BTLD starting...
E/BTL_CFG ( 4031): WARNING : [service.brcm.bt.patchfile] property_get failed (0)
E/BTL_CFG ( 4031): WARNING : [service.brcm.bt.bt_wake_polar] property_get failed (0)
E/BTL_CFG ( 4031): WARNING : [service.brcm.bt.host_wake_polar] property_get failed (0)
E/BTL_CFG ( 4031): WARNING : [service.brcm.bt.pcm_clk] property_get failed (0)
E/BTL_CFG ( 4031): WARNING : [service.brcm.bt.pcm_ms_role] property_get failed (0)
E/BTL_CFG ( 4031): WARNING : [service.brcm.bt.TRC_BTAPP] property_get failed (0)
E/ ( 4031): BTM: btm_read_local_name_complete: local name is [BCM4329B1]
E/ ( 4031): [hcis] Unknown HCI message type drop this byte 0x34
E/ ( 4031): [hcis] Unknown HCI message type drop this byte 0x31
E/BTAPP_CONF( 4031): Cannot open file /etc/bluetooth/did.conf
E/BTAPP_CONF( 4031): Cannot open file /etc/bluetooth/did.conf
E/BTAPP_CONF( 4031): Cannot open file /etc/bluetooth/did.conf
E/ ( 4045): this is not dir. type: 4, name: .
E/ ( 4045): this is not dir. type: 4, name: ..
E/ ( 4045): this is not reg. type: 4, name: F80:BD:70:52:76
E/ ( 4045): this is not reg. type: 4, name: F80:BD:70:52:76
E/ADAPTER ( 4045): hci_open_dev(hci0): No such device (19)
E/BluetoothEventLoop.cpp( 121): event_filter: Received signal org.bluez.AdapterropertyChanged from /org/bluez/590/hci0
E/BluetoothEventLoop.cpp( 121): event_filter: Received signal org.bluez.AdapterropertyChanged from /org/bluez/590/hci0
E/BluetoothEventLoop.cpp( 121): event_filter: Received signal org.bluez.AdapterropertyChanged from /org/bluez/590/hci0
E/BluetoothSettingButton( 239): onReceive()-S:12
E/BluetoothEventLoop.cpp( 121): event_filter: Received signal org.bluez.AdapterropertyChanged from /org/bluez/4045/hci0
E/OppEventHandler.cpp( 260): ye NewGlobalRefbject:0x40519ed0, me:0x40519ed0, gref:1
E/RequestQueueHelper( 3708): [Thread-15/15] Next pending job not found!!
E/RequestQueueHelper( 3708): [OPSWorkerThread-1343113726405/21] Next pending job not found!!

Look like messed up configuration or messed up kernel.
Try install right 2.3.5 or 2.3.6 and try to flash a right kernel.
I had got similar problem after flash cm7 kernel on stock 2.3.6
Sent from my GT-I9000 using xda app-developers app

Arlicc said:
Look like messed up configuration or messed up kernel.
Try install right 2.3.5 or 2.3.6 and try to flash a right kernel.
I had got similar problem after flash cm7 kernel on stock 2.3.6
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
I've tried every rom found and nothing happen, now I am with "g70xxkph-rooted-rj14.tar.md5" taked from http://forum.xda-developers.com/showthread.php?t=1446774, thanks to WT Ho.
I have to said that I am not an expert in Android and nothing come to my mind, what else can be done?

davisabe said:
I've tried every rom found and nothing happen, now I am with "g70xxkph-rooted-rj14.tar.md5" taked from http://forum.xda-developers.com/showthread.php?t=1446774, thanks to WT Ho.
I have to said that I am not an expert in Android and nothing come to my mind, what else can be done?
Click to expand...
Click to collapse
Try this link
http://forum.xda-developers.com/showthread.php?t=1414565
It's the kernel direct. Backup your device before you do anything.

alljokingaside said:
Try this link
http://forum.xda-developers.com/showthread.php?t=1414565
It's the kernel direct. Backup your device before you do anything.
Click to expand...
Click to collapse
Just did a backup and installed the Kernel and still without WiFi or BT
I really think it's a hardware issue.
Taked from terminal; maybe it can help:
$ export PATH=/data/local/bin:$PATH
$ su
# busybox iplink show dev eth0
iplink: can't find device 'eth0'
#
# iplink show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: ifb0: <BROADCAST,NOARP> mtu 1500 qdisc noop qlen 32
link/ether aa:c6:02:98:3a:c2 brd ff:ff:ff:ff:ff:ff
3: ifb1: <BROADCAST,NOARP> mtu 1500 qdisc noop qlen 32
link/ether e2:53:f6:ae:68:37 brd ff:ff:ff:ff:ff:ff
4: usb0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
link/ether 62:73:74:4d:bd:13 brd ff:ff:ff:ff:ff:ff
5: sit0: <NOARP> mtu 1480 qdisc noop
link/sit 0.0.0.0 brd 0.0.0.0
6: ip6tnl0: <NOARP> mtu 1460 qdisc noop
link/tunnel6 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00 brd 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
#

davisabe said:
Just did a backup and installed the Kernel and still without WiFi or BT
I really think it's a hardware issue.
So, nobody has a clue?
Click to expand...
Click to collapse

WiFi & BT
davisabe said:
davisabe said:
Just did a backup and installed the Kernel and still without WiFi or BT
I really think it's a hardware issue.
So, nobody has a clue?
Click to expand...
Click to collapse
Came on guys!
Click to expand...
Click to collapse

try going to CWM doing all 3wipes there, wipe data, factory reset, clear dalvik cache then reboot.
if this doesn't help, you most probably have a h/w problem

[Q] Boot Loop CM9 for Allwinner A10

Hi,
Tablet hangs in Bootloop after installed cm9_nightly_20120721 + protab2xxl_compatibility_1.2.0 startet from cwm 6.0.1.0.
Noticed that the "/data" partition only has 15MB of Space with 0B Byte free. I wiped the cache after installation with cwm, i am not able to boot to cwm again because key combinations not work on this device.
Got a T15A Generic tablet which has the same Hardware than protab 2 xxl, Goclever A103, Coby 1042 etc...
Any idear how to get CM9 or CM10 running?
Code:
--------- beginning of /dev/log/main
I/cm ( 70): Welcome to Android 4.0.4 / CyanogenMod-9-20120721-UNOFFICIAL-907
I/cm ( 71): _
I/cm ( 72): __ __ _ ___ _ _ __ ___ __ _ _ _ _ __ __))
I/cm ( 73): ((_ \(/'((_( ((\( ((_)((_( (('((\( ((`1( ((_)((_(
I/cm ( 74): )) _))
I/cm ( 75):
I/run-parts( 65): done Additional Modules Autoload
I/run-parts( 65): done Virtual Memory Parameter Tweaks
I/run-parts( 65): /system/etc/init.d/04mount[7]: cannot create /sys/devices/virtual/bdi/179:0/read_ahead_kb: No such file or directory
I/run-parts( 65): done Internal Storage Speed Fix
I/run-parts( 65): done devlistener started
I/run-parts( 65): done USB Audio Modules Autoload
--------- beginning of /dev/log/system
I/USB3G ( 109): usb 3g monitor v0.1 start
E/NetlinkEvent( 89): NetlinkEvent::FindParam(): Parameter 'DEVNAME' not found
D/DevListener( 89): Changed the permission of file /sys/devices/platform/sunxi-rfkill.0/rfkill/rfkill0/state to 666
I/DEBUG ( 100): debuggerd: Jul 21 2012 09:15:10
E/NetlinkEvent( 89): NetlinkEvent::FindParam(): Parameter 'DEVNAME' not found
I/USB3G ( 109): event { 'add', '/devices/platform/sw_hcd_host0/usb1', 'usb', '', 189, 0 }
I/USB3G ( 109): event { 'add', '/devices/platform/sw-ehci.1/usb2', 'usb', '', 189, 128 }
I/USB3G ( 109): event { 'add', '/devices/platform/sw-ohci.1/usb3', 'usb', '', 189, 256 }
I/Vold ( 98): Vold 2.1 (the revenge) firing up
I/Netd ( 99): Netd 1.0 starting
D/Vold ( 98): Volume sdcard state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 98): Volume extsd state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 98): Volume usbhost1 state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 98): Volume sdcard state changing 0 (No-Media) -> 1 (Idle-Unmounted)
E/NetlinkEvent( 89): NetlinkEvent::FindParam(): Parameter 'DEVNAME' not found
I/ ( 104): ServiceManager: 0x65c910
D/AndroidRuntime( 103):
D/AndroidRuntime( 103): >>>>>> AndroidRuntime START com.android.internal.os.ZygoteInit <<<<<<
D/AndroidRuntime( 103): CheckJNI is OFF
I/SurfaceFlinger( 102): SurfaceFlinger is starting
I/SurfaceFlinger( 102): SurfaceFlinger's main thread ready to run. Initializing graphics H/W...
I/gralloc ( 102): using (fd=13)
I/gralloc ( 102): id =
I/gralloc ( 102): xres = 1024 px
I/gralloc ( 102): yres = 600 px
I/gralloc ( 102): xres_virtual = 1024 px
I/gralloc ( 102): yres_virtual = 1200 px
I/gralloc ( 102): bpp = 32
I/gralloc ( 102): r = 16:8
I/gralloc ( 102): g = 8:8
I/gralloc ( 102): b = 0:8
I/gralloc ( 102): width = 163 mm (159.568100 dpi)
I/gralloc ( 102): height = 95 mm (160.421051 dpi)
I/gralloc ( 102): refresh rate = 61.07 Hz
D/libEGL ( 102): loaded /system/lib/egl/libGLES_android.so
D/libEGL ( 102): loaded /system/lib/egl/libEGL_mali.so
D/dalvikvm( 103): DexOpt: incorrect opt magic number (0xff ff ff ff)
D/dalvikvm( 103): ODEX file is stale or bad; removing and retrying (/data/dalvik-cache/[email protected]@[email protected])
D/libEGL ( 102): loaded /system/lib/egl/libGLESv1_CM_mali.so
D/libEGL ( 102): loaded /system/lib/egl/libGLESv2_mali.so
E/SurfaceFlinger( 102): couldn't find an EGLConfig matching the screen format
I/SurfaceFlinger( 102): EGL informations:
I/SurfaceFlinger( 102): # of configs : 28
I/SurfaceFlinger( 102): vendor : Android
I/SurfaceFlinger( 102): version : 1.4 Android META-EGL
I/SurfaceFlinger( 102): extensions: EGL_KHR_image EGL_KHR_image_base EGL_KHR_image_base EGL_KHR_image_pixmap L_KHR_gl_texture_2D_image EGL_KHR_gl_texture_cubemap_image EGL_KHR_gl_renderbuffer_image EGL_KHR_fence_sync EGL_ANDROID_image_native_buffer EGL_ANDROID_image_native_buffer
I/SurfaceFlinger( 102): Client API: OpenGL ES
I/SurfaceFlinger( 102): EGLSurface: 5-6-5-0, config=0x0
I/SurfaceFlinger( 102): OpenGL informations:
I/SurfaceFlinger( 102): vendor : ARM
I/SurfaceFlinger( 102): renderer : Mali-400 MP
I/SurfaceFlinger( 102): version : OpenGL ES-CM 1.1
I/SurfaceFlinger( 102): extensions: GL_OES_byte_coordinates GL_OES_fixed_point GL_OES_single_precision GL_OES_matrix_get GL_OES_read_format GL_OES_compressed_paletted_texture GL_OES_point_size_array GL_OES_point_sprite GL_OES_texture_npot GL_OES_query_matrix GL_OES_matrix_palette GL_OES_extended_matrix_palette GL_OES_compressed_ETC1_RGB8_texture GL_OES_EGL_image GL_OES_draw_texture GL_OES_depth_texture GL_OES_packed_depth_stencil GL_EXT_texture_format_BGRA8888 GL_OES_framebuffer_object GL_OES_stencil8 GL_OES_depth24 GL_ARM_rgba8 GL_OES_EGL_image_external GL_OES_EGL_sync GL_OES_rgb8_rgba8 GL_EXT_multisampled_render_to_texture GL_OES_texture_cube_map GL_EXT_discard_framebuffer
I/SurfaceFlinger( 102): GL_MAX_TEXTURE_SIZE = 4096
I/SurfaceFlinger( 102): GL_MAX_VIEWPORT_DIMS = 4096 x 4096
I/SurfaceFlinger( 102): flags = 00000000
D/display ( 102): start open_display!ctx->mFD_disp = 12
E/DisplayDispatcher( 102): Open Display Device Succesfully!
W/DisplayDispatcher( 102): display dispatcher enabled
D/libEGL ( 151): loaded /system/lib/egl/libGLES_android.so
D/libEGL ( 151): loaded /system/lib/egl/libEGL_mali.so
D/libEGL ( 151): loaded /system/lib/egl/libGLESv1_CM_mali.so
D/libEGL ( 151): loaded /system/lib/egl/libGLESv2_mali.so
D/dalvikvm( 103): Zip inflate: partial write (will retry): (8152 of 32768)
E/dalvikvm( 103): Zip inflate: write failed: No space left on device
E/dalvikvm( 103): Unable to extract+optimize DEX from '/system/framework/framework.jar'
D/dalvikvm( 103): Unable to process classpath element '/system/framework/framework.jar'
I/ ( 105): ServiceManager: 0x1b1d958
E/dalvikvm( 103): opt header write failed: No space left on device
I/dalvikvm( 103): Unable to open or create cache for /system/framework/android.policy.jar (/data/dalvik-cache/[email protected]@[email protected])
D/dalvikvm( 103): Unable to process classpath element '/system/framework/android.policy.jar'
E/dalvikvm( 103): opt header write failed: No space left on device
I/dalvikvm( 103): Unable to open or create cache for /system/framework/services.jar (/data/dalvik-cache/[email protected]@[email protected])
D/dalvikvm( 103): Unable to process classpath element '/system/framework/services.jar'
E/dalvikvm( 103): opt header write failed: No space left on device
I/dalvikvm( 103): Unable to open or create cache for /system/framework/apache-xml.jar (/data/dalvik-cache/[email protected]@[email protected])
D/dalvikvm( 103): Unable to process classpath element '/system/framework/apache-xml.jar'
E/dalvikvm( 103): opt header write failed: No space left on device
I/dalvikvm( 103): Unable to open or create cache for /system/framework/filterfw.jar (/data/dalvik-cache/[email protected]@[email protected])
D/dalvikvm( 103): Unable to process classpath element '/system/framework/filterfw.jar'
I/AudioFlinger( 105): Loaded primary audio interface from Sunxi audio HW HAL (audio)
I/AudioFlinger( 105): Using 'Sunxi audio HW HAL' (audio.primary) as the primary audio interface
I/AudioFlinger( 105): Loaded a2dp audio interface from A2DP Audio HW HAL (audio)
I/CameraService( 105): CameraService started (pid=105)
D/CameraHardware( 105): zoom_ratios: 100,106,113,120,126,133,140,146,153,160,166,173,180,186,193,200,206,213,220,226,233,240,246,253,260,266,273,280,286,293,300
I/AudioFlinger( 105): AudioFlinger's thread 0x1b2d258 ready to run
W/AudioFlinger( 105): Thread AudioOut_1 cannot connect to the power manager service
I/AudioPolicyService( 105): Loaded audio policy from LEGACY Audio Policy HAL (audio_policy)
E/JNIHelp ( 103): Native registration unable to find class 'android/debug/JNITest', aborting
F/libc ( 103): Fatal signal 11 (SIGSEGV) at 0xdeadbaad (code=1)
I/ServiceManager( 97): service 'media.audio_flinger' died
I/ServiceManager( 97): service 'media.player' died
I/ServiceManager( 97): service 'media.camera' died
I/ServiceManager( 97): service 'media.audio_policy' died
LOOP from here
Code:
Filesystem Size Used Free Blksize
/dev 406M 48K 406M 4096
/mnt/asec 406M 0K 406M 4096
/mnt/obb 406M 0K 406M 4096
/system 503M 182M 321M 4096
/data 15M 15M 0K 4096
/cache 251M 4M 247M 4096

push

I have got the same error on A13 and cannot find answer. what to do with it?
I think that it happened because "EGLSurface: 5-6-5-0"(5+6+5+0 = 16bits) does not relate with bpp = 32bits; r = 16:8; g = 8:8; b = 0:8; + 24:8 bits for alpha transparent layer. You need to get "EGLSurface: 8-8-8-8" (8+8+8+8=32).
gralloc allocated 32bits (according to your display) but it is not present in EGLConfig.
I need help to solve it.

[Q] Please look at my logcat please!

I am trying to port SEMC Debrand Engine to Galaxy FIt using clean CM7 as base
So far it boots and then bootloops.
Logcat:
Code:
--------- beginning of /dev/log/main
I/cm ( 112): Welcome to Android 2.3.7 / Achotjan's_SEMC-Debrand-engine_v3
I/cm ( 113): _
I/cm ( 114): __ __ _ ___ _ _ __ ___ __ _ _ _ _ __ __))
I/cm ( 115): ((_ \(/'((_( ((\( ((_)((_( (('((\( ((`1( ((_)((_(
I/cm ( 116): )) _))
I/cm ( 117):
I/DEBUG ( 151): debuggerd: Jan 1 2013 02:59:43
--------- beginning of /dev/log/system
I/Vold ( 149): Vold 2.1 (the revenge) firing up
I/Netd ( 150): Netd 1.0 starting
D/Vold ( 149): Volume sdcard state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 149): Volume sdcard state changing 0 (No-Media) -> 2 (Pending)
D/Vold ( 149): Volume sdcard state changing 2 (Pending) -> 1 (Idle-Unmounted)
D/AndroidRuntime( 153):
D/AndroidRuntime( 153): >>>>>> AndroidRuntime START com.android.internal.os.ZygoteInit <<<<<<
I/AndroidRuntime( 153): Heap size: -Xmx32m
D/AndroidRuntime( 153): CheckJNI is OFF
I/ ( 154): ServiceManager: 0xad50
I/AudioHardwareMSM72XX( 154): get_audpp_filter
I/AudioHardwareMSM72XX( 154): open /system/etc/AudioFilter.csv success.
I/AudioHardwareMSM72XX( 154): EQ flag = 00.
I/AudioHardwareMSM72XX( 154): EQ flag = 00.
I/AudioHardwareMSM72XX( 154): EQ flag = 00.
D/AudioHardwareInterface( 154): setMode(NORMAL)
I/AudioHardwareMSM72XX( 154): Set master volume to 7.
I/QualcommCameraHardware( 154): getCameraInfo: IN
I/QualcommCameraHardware( 154): getCameraInfo: loading libqcamera at 0xb000e0e8
I/QualcommCameraHardware( 154): getCameraInfo: numOfCameras = 1
I/QualcommCameraHardware( 154): Camera sensor 0 info:
I/QualcommCameraHardware( 154): camera_id: 0
I/QualcommCameraHardware( 154): modes_supported: 1
I/QualcommCameraHardware( 154): position: 0
I/QualcommCameraHardware( 154): sensor_mount_angle: 90
V/QualcommCameraHardware( 154): getCameraInfo: dlclose(libqcamera)
I/QualcommCameraHardware( 154): getCameraInfo: OUT
D/AudioFlinger( 154): setParameters(): io 1, keyvalue routing=2, tid 216, calling tid 154
I/AudioFlinger( 154): AudioFlinger's thread 0xcc68 ready to run
I/AudioHardwareMSM72XX( 154): Routing audio to Speakerphone
D/AudioHardwareMSM72XX( 154): doAudioRouteOrMute() device 6, mMode 0, mMicMute 1, mBuiltinMicSelected 0, muted
I/AudioHardwareMSM72XX( 154): Routing audio to Speakerphone
D/AudioHardwareMSM72XX( 154): setVoiceVolume(1.000000)
I/AudioHardwareMSM72XX( 154): Setting in-call volume to 7 (available range is 0 to 7)
I/SamplingProfilerIntegration( 153): Profiler is disabled.
I/Zygote ( 153): Preloading classes...
E/Zygote ( 153): setreuid() failed. errno: 2
D/dalvikvm( 153): GC_EXPLICIT freed 48K, 77% free 239K/1024K, external 0K/0K, paused 4ms
I/bluetooth_ScoSocket.cpp( 153): Entry name = MY-CAR ScoTypes = 0x7f
I/bluetooth_ScoSocket.cpp( 153): Entry name = Motorola HF850 ScoTypes = 0x7
D/szipinf ( 153): Initializing inflate state
D/dalvikvm( 153): GC_FOR_MALLOC freed 2914K, 57% free 2209K/5123K, external 0K/0K, paused 75ms
D/dalvikvm( 153): GC_FOR_MALLOC freed 2634K, 52% free 2485K/5123K, external 0K/0K, paused 68ms
I/Zygote ( 153): ...preloaded 1829 classes in 5841ms.
D/Zygote ( 153): setreuid() error ignored, same uid.
D/dalvikvm( 153): GC_EXPLICIT freed 887K, 48% free 2685K/5123K, external 0K/0K, paused 55ms
I/Zygote ( 153): Preload resources disabled, skipped.
D/dalvikvm( 153): GC_EXPLICIT freed 25K, 49% free 2660K/5123K, external 0K/0K, paused 45ms
D/dalvikvm( 153): GC_EXPLICIT freed <1K, 49% free 2660K/5123K, external 0K/0K, paused 44ms
D/dalvikvm( 153): GC_EXPLICIT freed <1K, 49% free 2660K/5123K, external 0K/0K, paused 44ms
I/dalvikvm( 153): System server process 254 has been created
I/Zygote ( 153): Accepting command socket connections
I/sysproc ( 254): Entered system_init()
I/sysproc ( 254): ServiceManager: 0xbed50
I/SurfaceFlinger( 254): SurfaceFlinger is starting
I/SurfaceFlinger( 254): dithering enabled
I/SurfaceFlinger( 254): SurfaceFlinger's main thread ready to run. Initializing graphics H/W...
E/SurfaceFlinger( 254): Couldn't open /sys/power/wait_for_fb_sleep or /sys/power/wait_for_fb_wake
I/msm7k.gralloc( 254): using (fd=27)
I/msm7k.gralloc( 254): id = msmfb30_30001
I/msm7k.gralloc( 254): xres = 240 px
I/msm7k.gralloc( 254): yres = 320 px
I/msm7k.gralloc( 254): xres_virtual = 240 px
I/msm7k.gralloc( 254): yres_virtual = 640 px
I/msm7k.gralloc( 254): bpp = 32
I/msm7k.gralloc( 254): r = 24:8
I/msm7k.gralloc( 254): g = 16:8
I/msm7k.gralloc( 254): b = 8:8
I/msm7k.gralloc( 254): width = 38 mm (160.421051 dpi)
I/msm7k.gralloc( 254): height = 51 mm (159.372543 dpi)
I/msm7k.gralloc( 254): refresh rate = 1.34 Hz
D/libEGL ( 254): loaded /system/lib/egl/libGLES_android.so
D/libEGL ( 254): loaded /system/lib/egl/libEGL_adreno200.so
D/libEGL ( 254): loaded /system/lib/egl/libGLESv1_CM_adreno200.so
D/libEGL ( 254): loaded /system/lib/egl/libGLESv2_adreno200.so
E/libEGL ( 254): eglSetSwapRectangleANDROID:1909 error 3008 (EGL_BAD_DISPLAY)
I/SurfaceFlinger( 254): EGL informations:
I/SurfaceFlinger( 254): # of configs : 35
I/SurfaceFlinger( 254): vendor : Android
I/SurfaceFlinger( 254): version : 1.4 Android META-EGL
I/SurfaceFlinger( 254): extensions: EGL_KHR_image EGL_KHR_image_base EGL_KHR_image_pixmap EGL_KHR_gl_texture_2D_image EGL_KHR_gl_texture_cubemap_image EGL_KHR_gl_renderbuffer_image EGL_ANDROID_image_native_buffer EGL_ANDROID_swap_rectangle EGL_ANDROID_get_render_buffer
I/SurfaceFlinger( 254): Client API: OpenGL ES
I/SurfaceFlinger( 254): EGLSurface: 8-8-8-8, config=0x3
I/SurfaceFlinger( 254): OpenGL informations:
I/SurfaceFlinger( 254): vendor : Qualcomm
I/SurfaceFlinger( 254): renderer : Adreno (TM) 200
I/SurfaceFlinger( 254): version : OpenGL ES-CM 1.1
I/SurfaceFlinger( 254): extensions: GL_AMD_compressed_ATC_texture GL_AMD_performance_monitor GL_APPLE_texture_2D_limited_npot GL_EXT_texture_filter_anisotropic GL_EXT_texture_format_BGRA8888 GL_EXT_texture_type_2_10_10_10_REV GL_OES_blend_equation_separate GL_OES_blend_func_separate GL_OES_blend_subtract GL_OES_compressed_ETC1_RGB8_texture GL_OES_compressed_paletted_texture GL_OES_depth_texture GL_OES_draw_texture GL_OES_EGL_image GL_OES_EGL_image_external GL_OES_framebuffer_object GL_OES_matrix_palette GL_OES_packed_depth_stencil GL_OES_point_size_array GL_OES_point_sprite GL_OES_read_format GL_OES_rgb8_rgba8 GL_OES_stencil_wrap GL_OES_texture_cube_map GL_OES_texture_env_crossbar GL_OES_texture_float GL_OES_texture_half_float GL_OES_texture_half_float_linear GL_OES_texture_npot GL_OES_texture_mirrored_repeat GL_QCOM_binning_control GL_QCOM_extended_get GL_QCOM_tiled_rendering GL_AMD_compressed_3DC_texture
I/SurfaceFlinger( 254): GL_MAX_TEXTURE_SIZE = 4096
I/SurfaceFlinger( 254): GL_MAX_VIEWPORT_DIMS = 4096
I/SurfaceFlinger( 254): flags = 00000000
D/SensorService( 254): nuSensorService starting...
E/bdaddr ( 271): Error reading /data/.nvmac_bt.info (unexpected size 18)
E/SensorHAL( 254): __poll_init
E/SensorHAL( 254): +__poll_activate: handle=0 enabled=0
E/SensorHAL( 254): +__poll_activate: handle=1 enabled=0
E/SensorHAL( 254): +__poll_activate: handle=2 enabled=0
E/SensorHAL( 254): +__poll_activate: handle=3 enabled=0
I/SensorService( 254): BMA220
I/SensorService( 254): MMC314X
I/SensorService( 254): Mag & Acc Combo Orientation Sensor
I/SensorService( 254): TAOS
I/sysproc ( 254): System server: starting Android runtime.
I/sysproc ( 254): System server: starting Android services.
I/SystemServer( 254): Entered the Android system server!
D/SensorService( 254): nuSensorService thread starting...
I/sysproc ( 254): System server: entering thread pool.
I/SystemServer( 254): Entropy Service
I/SystemServer( 254): Power Manager
I/SystemServer( 254): Activity Manager
I/ActivityManager( 254): Memory class: 32
D/libEGL ( 270): loaded /system/lib/egl/libGLES_android.so
D/libEGL ( 270): loaded /system/lib/egl/libEGL_adreno200.so
W/UsageStats( 254): Usage stats version changed; dropping
D/libEGL ( 270): loaded /system/lib/egl/libGLESv1_CM_adreno200.so
D/libEGL ( 270): loaded /system/lib/egl/libGLESv2_adreno200.so
E/SurfaceFlinger( 254): eglSwapBuffers: EGL error 0x3008 (EGL_BAD_DISPLAY)
W/zipro ( 270): Unable to open zip '/data/local/bootanimation.zip': No such file or directory
HELP ME PLEASE!
PS. Full logcat http://pastebin.com/wxcMd6Nz
Thanx in Advance!

Logcat shows lot of Sony Ericsson specific libraries and files are missing and because of the dependency, it's throwing error and restarting framework again and again. Why are you trying to use something Sony Ericsson on a Samsung phone?

ivoidwarranty said:
Logcat shows lot of Sony Ericsson specific libraries and files are missing and because of the dependency, it's throwing error and restarting framework again and again. Why are you trying to use something Sony Ericsson on a Samsung phone?
Click to expand...
Click to collapse
Here it is running on Galaxy Y:
http://forum.xda-developers.com/showthread.php?t=1979146
and
Here is original thread (It is CM7, modded to run SE files)
http://forum.xda-developers.com/showthread.php?t=1504633

[Q] [HELP] understand my logcat

Hello, here is my problem,
I have always ported the miui rom to my thl w200 device.
in the latest builds, after porting it to my phone I get stuck at bootlogo.
I did a logcat but cant really find what causes this.
someone can look at it and help me?
--------- beginning of /dev/log/main
I/Resize ( 86): The size of data already meet the request.
I/Resize ( 86): Partition has been resized,so nothing to do!
D/ADB_SERVICES( 158): install_listener('tcp:5037','*smartsocket*')
D/ADB_SERVICES( 158): adb_main(): pre init_jdwp()
D/ADB_SERVICES( 158): adb_main(): post init_jdwp()
D/ADB_SERVICES( 158): Event loop starting
D/ADB_SERVICES( 158): transport: 0xf67520 init'ing for usb_handle 0xf67498 (sn='')
I/ADB_SERVICES( 158): transport: usb
D/ADB_SERVICES( 158): transport: (null) registered
D/ADB_SERVICES( 158): transport: (null) (16,17) starting
W/ADB_SERVICES( 158): (null): starting transport input thread, reading from fd 17
W/ADB_SERVICES( 158): (null): starting transport output thread on fd 17, SYNC online (2)
D/ADB_SERVICES( 158): recv: SYNC 00000001 00000002 0000
W/ADB_SERVICES( 158): (null): transport SYNC online
E/ccci_mdinit(0)( 121): md_init ver:1.00
E/ccci_mdinit(0)( 120): md_init ver:1.00
I/6620_launcher( 117): open device node succeed.(Node:/dev/stpwmt, fd:3)
I/6620_launcher( 117): keypersist.mtk.wcn.combo.chipid)-value0x6628),chipId:0x6628
I/6620_launcher( 117): index:1, chipId:0x6628
I/6620_launcher( 117): chiId:0x6628
I/6620_launcher( 117): index:1, chipId:0x6628
I/6620_launcher( 117): set chipId(0x6628) to HIF-SDIO module
I/6620_launcher( 117): Info:key:mt6620.defAnt value:mt6620_ant_m3.cfg
I/6620_launcher( 117): Info:key:mt6628.defAnt value:mt6628_ant_m1.cfg
I/6620_launcher( 117): NULL is returned, eighter EOF or error maybe found
I/6620_launcher( 117): close /system/etc/firmware/WMT.cfg succeed
I/6620_launcher( 117): index:1, chipId:0x6628
I/6620_launcher( 117): STP Mode is not set, fetching default mode...
I/6620_launcher( 117): chipId(0x6628), default Mode(1), strlen(gWmtCfgName)(39), wmtCfgFile(/system/etc/firmware//mt6628_ant_m1.cfg)
I/6620_launcher( 117): HifConfig:0x0001, wmtCfgFile:/system/etc/firmware//mt6628_ant_m1.cfg
I/6620_launcher( 117): keyro.build.type)-valueuser)
I/6620_launcher( 117): MCU patch folder path: /system/etc/firmware/
I/6620_launcher( 117): Common Interface: UART mode
I/6620_launcher( 117): MCU patch folder path: /system/etc/firmware/
I/6620_launcher( 117): Common Interface: UART mode
I/6620_launcher( 117): uart name ttyMT2
D/MsensorDaemon( 151): Msensor deamon statr!!!!!!!!!!!!
D/MsensorDaemon( 151): msensor demon start process detect demon name = memsicd3416x
D/MsensorDaemon( 151):
D/MsensorDaemon( 151): msensor demon start process detect demon prop = init.svc.memsicd3416x
D/MsensorDaemon( 151):
D/MsensorDaemon( 151): start_msensor_demon
D/MsensorDaemon( 151): HAVE_LIBC_SYSTEM_PROPERTIES
E/MsensorDaemon( 151): [99] ''
D/permission_check( 145): permission check ver:0.01
D/permission_check( 145): Empty, not decrypt!
D/permission_check( 145): change_md_nvram_attr++
--------- beginning of /dev/log/system
E/POAD ( 155): boot_mode = 0
E/POAD ( 155): update boot reason = 0
D/permission_check( 145): new_ver file exist!!!
D/permission_check( 145): change_md_nvram_attr--0
I/stp_dump( 143): ==>main
I/stp_dump( 143): stp_dump_ctrl_iface_trace_logger_sendto_fd succeed
E/stp_dump( 143): [STP_DBG] family id = 19
I/stp_dump( 143): sending dummy command
I/stp_dump( 143): set sock number to 9
I/stp_dump( 143): addr.sun_path:stp_DIR=/data/misc/stp_dump GROUP=stp
I/stp_dump( 143): Using existing control interface directory.
E/stp_dump( 143): mkdir (/data/misc/stp_dump) succeed
I/stp_dump( 143): ctrl_interface_group=1000 (from group name 'stp')
I/stp_dump( 143): chown (/data/misc/stp_dump) succeed
I/stp_dump( 143): CTRL: chmod[/data/misc/stp_dump] succeed
E/stp_dump( 143): ctrl_iface bind(PF_UNIX) failed: Address already in use
E/stp_dump( 143): ctrl_iface exists, but does not allow connections - assuming it was leftover from forced program termination
D/stp_dump( 143): Successfully replaced leftover ctrl_iface socket '/data/misc/stp_dump/stpd'
I/stp_dump( 143): set sock number to 10
I/stp_dump( 143): stp_dump_ctrl_iface_init succeed.
I/stp_dump( 143): ==>main222
I/busybox ( 114): run-parts: /system/etc/init.d: No such file or directory
D/wlanLoader( 144): checkSupport 0x6628
D/wlanLoader( 144): Match 0x6628
D/wlanLoader( 144): Get the correct chip version mt6628
D/wlanLoader( 144): Get chip Version mt6628.
D/wlanLoader( 144): DRIVER_MODULE_PATH is /system/lib/modules/wlan_mt6628.ko
D/MsensorDaemon( 151): HAVE_LIBC_SYSTEM_PROPERTIES
D/MsensorDaemon( 151): memsicd3416x running
D/MsensorDaemon( 151): Msensor deamon2 statr!!!!!!!!!!!!
D/MsensorDaemon( 151): open demon attr err = No such file or directory
E/stp_dump( 143): table == NULL || table->table == NULL
E/stp_dump( 143): table == NULL || table->table == NULL
D/wlanLoader( 144): Success to insmod the /system/lib/modules/wlan_mt6628.ko
I/thermal_repeater( 154): START+++++++++ 154
I/thermal_repeater( 154): Success to write 154 to /proc/wmt_tm/tm_pid
I/thermal_repeater( 154): Fail to chmod ffffffff
I/thermal_repeater( 154): Enter infinite loop
I/AEE/AED ( 122): Built Jan 30 2013 19:35:15
D/AEE/AED ( 122): ChangeAEEWorkMode: 3
I/AEE/AED ( 122): AED config
I/AEE/AED ( 122): mode '3'
I/AEE/AED ( 122): exp level '1
I/AEE/AED ( 122): dal enable '0'
I/AEE/AED ( 122): db count '20'
I/AEE/AED ( 122): db storage '1'
I/AEE/AED ( 122): SMP Info => 1
I/MobileLogD( 123): [void change_permission()] set mobile_log_d is in root user, adjust caps for its thread
I/MobileLogD( 123): mobilelog start after boot, mode:0
D/MobileLogD/cache( 123): init cache configure items....
D/MobileLogD/cache( 123): value of ro.build.type:user.
I/installd( 140): installd firing up
D/PQ ( 130): PQ init start...
D/PQ ( 130): PQ test...
I/ ( 137): ServiceManager: 0x41661698
D/PQ ( 130): PQ init end !
E/AEE/LIBAEE( 122): Can't remove file /sdcard/mtklog/aee_exp/temp: No such file or directory
E/AEE/LIBAEE( 122): Can't remove file /data/aee_exp/temp: No such file or directory
V/AEE/AED ( 122): ETB buffer length = 512
I/AEE/AED ( 122): wdt_status = 2, fiq_step=0
I/AEE/AED ( 122): reboot_reason = 0
V/AEE/AED ( 122): ETM start
D/installd( 140): LBE is enabled, starting...
D/NVRAM ( 152): NvRAMAgent created
E/NVRAM ( 152): Haman, serviceManager work well
D/NVRAM ( 152): NvRAMAgent Service is now ready
I/DPFD ( 149): [DPFD] main start ...
I/DPFD ( 149): [DPFD] set priority to RR:268435540
I/DPFD ( 149): [int adjustPriority()] set dpfd is in root user, adjust caps for its thread
D/DPFD ( 149): [DPFD] Wait Request.....
I/DMAgent ( 147): DMAgent created
I/DMAgent ( 147): [DMAgent]register OK.
D/DMAgent ( 147): DMAgent Service is now ready
D/MobileLogD( 123): write "mobilelog start after boot, mode:0" to mblog
E/installd( 140): Failed to load liblbesec.so
I/installd( 140): add service shelld success!
W/installd( 140): service start entry 'shelld', flag :0
W/installd( 140): starting 'shelld'
E/ccci_fsd(0)( 118): md_fsd Ver:v1.00
I/Hald ( 133): Hald 1.1011 starting
D/ccci_fsd(1)( 118): /dev/ccci_fs is opend(600).
D/ccci_fsd(1)( 118): Check OTP...
D/Hald ( 133): Create ResetManager
D/Hald ( 133): Size of initial message: 6
D/Hald ( 133): [MTK_WIFI] family id = 20
D/Hald ( 133): Reset Manager Prepare Dummy command
D/Hald ( 133): Reset Manager Send Command for binding
D/Hald ( 133): Start ResetManager
E/ccci_fsd(0)( 119): md_fsd Ver:v1.00
E/ccci_fsd(2)( 119): /dev/ccci2_fs is not enabled(2).
D/MobileLogD/cache( 123): config autostart=0 same as current value
D/MobileLogD/cache( 123): config logpath=/mnt/sdcard same as current value
D/MobileLogD/cache( 123): config logsize=300 same as current value
D/MobileLogD/cache( 123): config AndroidLog=1 same as current value
D/MobileLogD/cache( 123): config KernelLog=1 same as current value
D/MobileLogD/cache( 123): config BTLog=1 same as current value
D/MobileLogD/cache( 123): config BTLog=1 same as current value
E/MobileLogD/cache( 123): cant get true log path through property
E/MobileLogD/cache( 123): true path is /mnt/sdcard
D/MobileLogD( 123): create local socket server success
D/Vold ( 116): Check whether nvram restore ready!
D/NVRAM ( 128): g_i4CFG_File_Count: 25
D/NVRAM ( 128): NVM_Init Max Lid: 43
D/NVRAM ( 128): Total nvram Lid number is 43
I/Netd ( 125): Netd 1.0 starting
W/InterfaceController( 125): Warning (Cannot load library: load_library(linker.cpp:745): library "/system/lib/libnetcmdiface.so" not found) while opening the net interface command library
D/agps ( 142): [agps] WARNING: [Main] mtk_agpsd is running ver=0.46
D/agps ( 142): [agps] WARNING: [Main] mkdir failure for /data/agps_supl/log reason=[File exists]
D/MtkAgpsNative( 142): SuplRawLog.bEnable:0
D/MtkAgpsNative( 142): SuplRawLog.szPath:/sdcard
D/MtkAgpsNative( 142): SuplRawLog.szFile:agps_raw.log
D/MtkAgpsNative( 142): SuplSslLog.bEnable:0
D/MtkAgpsNative( 142): SuplSslLog.szPath:/sdcard
D/MtkAgpsNative( 142): SuplSslLog.szFile:agps_ssl.log
I/MtkAgpsNative( 142): Enter up_int_init
I/MtkAgpsNative( 142): Enter mtk_agps_up_init
D/MtkAgpsNative( 142): FS_CreateDir: /data/agps_supl
W/MtkAgpsNative( 142): -> errno(EEXIST) => dir already exists
D/MtkAgpsNative( 142): ############ mtk_agps_up_init --> agps_disable_enalbe_times = 1 ############
Click to expand...
Click to collapse

[Q] [CM12] Surfaceflinger seems to block boot process

Hi,
I'm trying to port cm12 to htc one v, which doesn't have devs anymore, so I'm asking here.
The phone starts surfaceflinger and shows the bootanimation, then it does nothing:
Code:
--------- beginning of main
I/lowmemorykiller( 1680): Using in-kernel low memory killer interface
I/cm ( 1696): ____ _ _ ____ _ _ ____ ____ ____ _ _ _ _ ____ ___
--------- beginning of system
I/Vold ( 1682): Vold 2.1 (the revenge) firing up
D/Vold ( 1682): Volume sdcard0 state changing -1 (Initializing) -> 0 (No-Media)
I/Cryptfs ( 1682): Check if PFE is activated on Boot
I/cm ( 1697): | \_/ |__| |\ | | | | __ |___ |\ | |\/| | | | \
E/Cryptfs ( 1682): Bad magic for real block device /dev/block/platform/msm_sdcc.2/by-num/p26
E/Cryptfs ( 1682): Error getting crypt footer and key
I/cm ( 1698): |___ | | | | \| |__| |__] |___ | \| | | |__| |__/
I/SurfaceFlinger( 1687): SurfaceFlinger is starting
I/cm ( 1701): Welcome to Android 5.0.2 / CyanogenMod-12-20150209-UNOFFICIAL-alpha_0.4-primou
I/SurfaceFlinger( 1687): SurfaceFlinger's main thread ready to run. Initializing graphics H/W...
D/libEGL ( 1687): loaded /system/lib/egl/libEGL_adreno200.so
D/libEGL ( 1687): loaded /system/lib/egl/libGLESv1_CM_adreno200.so
D/libEGL ( 1687): loaded /system/lib/egl/libGLESv2_adreno200.so
D/Vold ( 1682): Volume sdcard0 state changing 0 (No-Media) -> 2 (Pending)
D/DirectVolume( 1682): DirectVolume::handlePartitionAdded -> MAJOR 179, MINOR 65, PARTN 1
D/Vold ( 1682): Volume sdcard0 state changing 2 (Pending) -> 1 (Idle-Unmounted)
I/Adreno200-EGL( 1687): <qeglDrvAPI_eglInitialize:269>: EGL 1.4 QUALCOMM build: AU_LINUX_ANDROID_JB_VANILLA.04.02.02.60.051_msm8960_JB_VANILLA_CL2997615_release_AU (CL2997615)
I/Adreno200-EGL( 1687): Build Date: 04/11/13 Thu
I/Adreno200-EGL( 1687): Local Branch:
I/Adreno200-EGL( 1687): Remote Branch: quic/mako_jb_mr1
I/Adreno200-EGL( 1687): Local Patches: NONE
I/Adreno200-EGL( 1687): Reconstruct Branch: AU_LINUX_ANDROID_JB_VANILLA.04.02.02.60.051 + NOTHING
I/gralloc ( 1687): using (fd=13)
I/gralloc ( 1687): id = msmfb40_0
I/gralloc ( 1687): xres = 480 px
I/gralloc ( 1687): yres = 800 px
I/gralloc ( 1687): xres_virtual = 480 px
I/gralloc ( 1687): yres_virtual = 2400 px
I/gralloc ( 1687): bpp = 32
I/gralloc ( 1687): r = 0:8
I/gralloc ( 1687): g = 8:8
I/gralloc ( 1687): b = 16:8
I/gralloc ( 1687): width = 52 mm (234.461533 dpi)
I/gralloc ( 1687): height = 88 mm (230.909088 dpi)
I/gralloc ( 1687): refresh rate = 52429280.00 Hz
D/CALCFPS ( 1687): DEBUG_CALC_FPS: 0
D/CALCFPS ( 1687): period: 10
D/CALCFPS ( 1687): ignorethresh_us: 500000
D/CALCFPS ( 1687): DEBUG_CALC_FPS: 0
D/CALCFPS ( 1687): period: 10
D/CALCFPS ( 1687): ignorethresh_us: 500000
E/SELinux ( 1681): avc: denied { add } for service=display.hwcservice scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:system_server_service:s0 tclass=service_manager
I/Adreno200-C2D( 1687): <c2d_wrapper_init:126>: C2D2 initializing z180 version: libc2d2_z180.so
I/Adreno200-C2D( 1687): <c2d_wrapper_init:183>: C2D2 wrapper initialized successfully
I/hwcomposer( 1687): Initializing Qualcomm Hardware Composer
I/hwcomposer( 1687): MDP version: 400
I/hwcomposer( 1687): DYN composition threshold : 2.000000
I/hwcomposer( 1687): hwc_device_open: Faking Hardware VSYNC
I/SurfaceFlinger( 1687): Using composer version 1.0
I/hwcomposer( 1687): Initializing UEvent Listener Thread
I/hwcomposer( 1687): Initializing VSYNC Thread
W/SurfaceFlinger( 1687): no suitable EGLConfig found, trying a simpler query
I/SurfaceFlinger( 1687): EGL information:
I/SurfaceFlinger( 1687): vendor : Android
I/SurfaceFlinger( 1687): version : 1.4 Android META-EGL
I/SurfaceFlinger( 1687): extensions: EGL_KHR_get_all_proc_addresses EGL_ANDROID_presentation_time EGL_KHR_image EGL_KHR_image_base EGL_KHR_lock_surface EGL_KHR_gl_texture_2D_image EGL_KHR_gl_texture_cubemap_image EGL_KHR_gl_renderbuffer_image EGL_KHR_fence_sync EGL_EXT_create_context_robustness EGL_ANDROID_image_native_buffer EGL_ANDROID_recordable
I/SurfaceFlinger( 1687): Client API: OpenGL_ES
I/SurfaceFlinger( 1687): EGLSurface: 8-8-8-8, config=0x4
I/SurfaceFlinger( 1687): OpenGL ES informations:
I/SurfaceFlinger( 1687): vendor : Qualcomm
I/SurfaceFlinger( 1687): renderer : Adreno (TM) 205
I/SurfaceFlinger( 1687): version : OpenGL ES 2.0 [email protected] [email protected] ([email protected])
I/SurfaceFlinger( 1687): extensions: GL_EXT_debug_marker GL_AMD_compressed_ATC_texture GL_AMD_performance_monitor GL_AMD_program_binary_Z400 GL_EXT_robustness GL_EXT_texture_format_BGRA8888 GL_EXT_texture_type_2_10_10_10_REV GL_NV_fence GL_OES_compressed_ETC1_RGB8_texture GL_OES_depth_texture GL_OES_depth24 GL_OES_EGL_image GL_OES_EGL_image_external GL_OES_element_index_uint GL_OES_fbo_render_mipmap GL_OES_fragment_precision_high GL_OES_get_program_binary GL_OES_packed_depth_stencil GL_OES_rgb8_rgba8 GL_OES_standard_derivatives GL_OES_texture_3D GL_OES_texture_float GL_OES_texture_half_float GL_OES_texture_half_float_linear GL_OES_texture_npot GL_OES_vertex_half_float GL_OES_vertex_type_10_10_10_2 GL_OES_vertex_array_object GL_QCOM_alpha_test GL_QCOM_binning_control GL_QCOM_driver_control GL_QCOM_perfmon_global_mode GL_QCOM_extended_get GL_QCOM_extended_get2 GL_QCOM_tiled_rendering GL_QCOM_writeonly_rendering GL_AMD_compressed_3DC_texture GL_EXT_texture_filter_anisotropic
I/SurfaceFlinger( 1687): GL_MAX_TEXTURE_SIZE = 4096
I/SurfaceFlinger( 1687): GL_MAX_VIEWPORT_DIMS = 4096
E/cutils-trace( 1687): Error opening trace file: No such file or directory (2)
D/SurfaceFlinger( 1687): Set power mode=2, type=0 flinger=0x40662000
D/SurfaceFlinger( 1687): SF. shader cache generated - 26 shaders in 684.494873 ms
D/libEGL ( 1787): loaded /system/lib/egl/libEGL_adreno200.so
D/libEGL ( 1787): loaded /system/lib/egl/libGLESv1_CM_adreno200.so
D/libEGL ( 1787): loaded /system/lib/egl/libGLESv2_adreno200.so
I/Adreno200-EGL( 1787): <qeglDrvAPI_eglInitialize:269>: EGL 1.4 QUALCOMM build: AU_LINUX_ANDROID_JB_VANILLA.04.02.02.60.051_msm8960_JB_VANILLA_CL2997615_release_AU (CL2997615)
I/Adreno200-EGL( 1787): Build Date: 04/11/13 Thu
I/Adreno200-EGL( 1787): Local Branch:
I/Adreno200-EGL( 1787): Remote Branch: quic/mako_jb_mr1
I/Adreno200-EGL( 1787): Local Patches: NONE
I/Adreno200-EGL( 1787): Reconstruct Branch: AU_LINUX_ANDROID_JB_VANILLA.04.02.02.60.051 + NOTHING
E/cutils-trace( 1787): Error opening trace file: No such file or directory (2)
E/BootAnimation( 1787): couldn't find audio_conf.txt
W/BootAnimation( 1787): Audio service is not initiated.
D/BootAnimation( 1787): Use save memory method, maybe small fps in actual.
D/BootAnimation( 1787): Use save memory method, maybe small fps in actual.
I can kill surfaceflinger, and zygote starts, but then dex2oat fails.
This is my first android rom and I just wanna know how I may find the problem.
If you want, you can look at my device tree on github: https://github.com/AndroidPrimou/android_device_htc_msm7x30-common/tree/cm-12.0-new, https://github.com/AndroidPrimou/android_device_htc_primou/tree/cm-12.0-new
Kernel: https://github.com/rastomanchik/android_kernel_htc_primou
Please help, I'm completely clueless

Better Mobile App

welcome