Q&A for ★[Rom][VS985_11C][4.4.2] Stock Root Deodex [Nov, 8th]★
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for ★[Rom][VS985_11C][4.4.2] Stock Root Deodex [Nov, 8th]★. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
How To Flash Modem
If I wanted to flash the modem zip how would I do that? Can I flash it from flashify or do i go into TWRP and just install it like a normal zip?
Duskmustache said:
If I wanted to flash the modem zip how would I do that? Can I flash it from flashify or do i go into TWRP and just install it like a normal zip?
Click to expand...
Click to collapse
I flashed the zip in recovery without any trouble.
Sent from my VS985 4G using Tapatalk
I usually use viper4android especially because LG doesn't have any audio effects settings outside of it's music app. (I use Google music) when I go to install it it says check that the Rom is rooted and busyboxed... Any ideas?
Does xposed work with a deodex rom?
TonikJDK said:
Does xposed work with a deodex rom?
Click to expand...
Click to collapse
I have xposed and g3 tweak box working just fine
Sent from my VS985 4G using Tapatalk
I have probably a stupid question. Should I flash the modem first or the ROM or does it even matter? Thanks
Sent from my SCH-I605 using XDA Free mobile app
It doesn't matter.
Sent from my VS985 4G using Tapatalk
trent999 said:
It doesn't matter.
Sent from my VS985 4G using Tapatalk
Click to expand...
Click to collapse
Thank you
Gapps?
Thanks Beans What about gapps? Which version? Any suggestions?
Thank you in advance for you help!
Edit - mod please delete...answered myself. Sorry!
Is there a way to make the install update go away?
timmyd463229 said:
Is there a way to make the install update go away?
Click to expand...
Click to collapse
Freeze it in tibu
thank you...
this is better than 10b im assuming?? was originally on 10b but didnt want to go to 11c because didnt want to get stuck and not to be able to roll back in case i didnt like it.,.. im on liquid smooth had a nandroid backup but wheni formatted my internal i accidentaly erased my nandroid backup couldnt get into download mode to use kdz/tot im hoping this rom or the 10b rom will let me use twrp to go back to stock because the 4k recording doesnt work that good with liquid smooth.. Thank you for all your work you hopefully save me alot of headaches from deleting my nandroid backup..
Other than the deodex, what's different between rooting on a 10b build and taking the OTA? Assuming you've rooted such that it carries over ... which it seems is possible.
Related
Q&A for [ROM] Barren - Odexed & Deodexed
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] Barren - Odexed & Deodexed. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
What tools did you use to make this rom?
droidx6891 said:
What tools did you use to make this rom?
Click to expand...
Click to collapse
Are you asking because you're curious? Or learning?
If you're curious, I dd'd fresh from Flashtool.
If you trying to learn, pm me and I'll help out with what I can.
Would a dirty flash work?
sent from my LG G3
Is there anyway to restore the LG Health app? I tried using TB to restore it from stock rom, it shows it as being restored/re-installed but I can't access it or use it? Wasnt sure if there were other necessary files needed that I'm missing. Thanks!
Dueces99 said:
Is there anyway to restore the LG Health app? I tried using TB to restore it from stock rom, it shows it as being restored/re-installed but I can't access it or use it? Wasnt sure if there were other necessary files needed that I'm missing. Thanks!
Click to expand...
Click to collapse
I'll make a flashable zip in the next few days for people that want to add Lg, Sprint stuff back.
It'll be in post #2 of the ROM thread. I'll also hopefully be posting flashable updates there too.
Any chance this rom will work with d851?
Sent from my LG-D851 using XDA Free mobile app
pluginre said:
Any chance this rom will work with d851?
Sent from my LG-D851 using XDA Free mobile app
Click to expand...
Click to collapse
It's a Sprint ROM, so probably not. Yet.
We're all in the learning phase of flashing these G3's, so it'll take a little time to see if it'll work with most of the other G3s, which are all built for GSM.
Sprint is built for CDMA with an option for GSM. Hopefully that makes sense?
I guess you could try it, but you may end up using Flashtool, and hopefully don't end up with a brick.
engine95 said:
It's a Sprint ROM, so probably not. Yet.
We're all in the learning phase of flashing these G3's, so it'll take a little time to see if it'll work with most of the other G3s, which are all built for GSM.
Sprint is built for CDMA with an option for GSM. Hopefully that makes sense?
I guess you could try it, but you may end up using Flashtool, and hopefully don't end up with a brick.
Click to expand...
Click to collapse
I'll try it and report back if I have any problems
Sent from my LG-D851 using XDA Free mobile app
Is this a newer version than the stock deodexed you had up? Im running that. Anything new in this or just the name?
Nevermind. I see now.
Sent from my LS990 using Tapatalk Pro.
Okay, I'm curious. What happens if we do select internal in the TWRP wipe menu? I understand not to wipe external, and I moved my TB folder there and confirmed TWRP backups are there as well. Does an internal wipe also wipe the external via symlinks or something?
Sent from my LGLS990 using XDA Free mobile app
SilverZero said:
Okay, I'm curious. What happens if we do select internal in the TWRP wipe menu? I understand not to wipe external, and I moved my TB folder there and confirmed TWRP backups are there as well. Does an internal wipe also wipe the external via symlinks or something?
Sent from my LGLS990 using XDA Free mobile app
Click to expand...
Click to collapse
Internal wipes your internal SD. If you have nothing you need there it's fine.
Usually there's something there you forgot about. That's my case anyway.
Or if you have different roms you restore to, they may need files from there.
SilverZero said:
Okay, I'm curious. What happens if we do select internal in the TWRP wipe menu? I understand not to wipe external, and I moved my TB folder there and confirmed TWRP backups are there as well. Does an internal wipe also wipe the external via symlinks or something?
Sent from my LGLS990 using XDA Free mobile app
Click to expand...
Click to collapse
I'm glad you asked that cause I've been meaning to. Nice to start completely fresh.
LoL. Im not tryin to be a jerk. That's funny tho. Silver the fact you didn't know that shocks me.
Sent from my LS990 using Tapatalk Pro.
custom rom unlock gsm
Hello im new in this forum sorry if i post to a wrong place
I have a lg g3 ls990 unlocked with the carrier folder to work to gsm in greece
If i install a custom rom and install the carrier folder again the phone will be work to gsm networks?? Or not??I really want to change the current rom!! any answers are wellcome thanks a lot and keep the good job all of youu!!!!
sakis450 said:
Hello im new in this forum sorry if i post to a wrong place
I have a lg g3 ls990 unlocked with the carrier folder to work to gsm in greece
If i install a custom rom and install the carrier folder again the phone will be work to gsm networks?? Or not??I really want to change the current rom!! any answers are wellcome thanks a lot and keep the good job all of youu!!!!
Click to expand...
Click to collapse
I wished I know for sure the answer. I would say it wouldn't. But if you have stock working already, then maybe it will.
My little warning just in case, If it doesn't work you may end up having to use Flashtool to fix it, or with a brick. I can't be held responsible.
But, if you do decide to try it and it does work, would you mind sharing that carrier folder? If that's all we need to get this thing GSM I'd be really happy.
Good morning!! That what i did for the gsm stock rom [URL="http://forum.xda-developers.com/sprint-lg-g3/general/unlock-sim-gsm-how-to-t2853594" and works i had low signal but i change the network mode with shortcut master to 1800 and everything ok!! By the way i ll make a full back up and try it maybe tomorrow and i ll post you back the results thanks for the answer
everything ok!!!! i installed the deoxed rom from engine95 and works greatt!!! and the most important i have gsm signal without do anything more !!!! the only problem i had was with the activation screen i did the trick with the buttons volume up and down power button and back without wifi asked me for pin code accept had signal but still activation screen reboot with wifi this time did again the trick and after 5 minutes told me activation failed and the menu pops up
the rom is faster and smoother the volume is louder and i see a difference in camera quality the photos are cleaner and sharper
the only strange thing is that i did wipe and advance wipe but i still have my photos and my music!!!( i have no sd card)
thanks a lottt!!!
Barren ROM
After installing Barren ROM, how can I find out if the original bloatware was reduced. I read in some threads that after installation of this ROM the original bloatware was reinstalled.
tareyaz said:
After installing Barren ROM, how can I find out if the original bloatware was reduced. I read in some threads that after installation of this ROM the original bloatware was reinstalled.
Click to expand...
Click to collapse
They made mistakes. I think they forgot to read the op and wipe/system. As far as I've heard, it's bloat free.
Believe me you'll know if the bloat gets installed.
Q&A for [ROM] Stock ZV6 Base - Odex & Deodex
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] Stock ZV6 Base - Odex & Deodex. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Can this be flashed over my current setup?
Yup. And you can restore back if you want. The only thing that sticks is the modem
Again thanks for all the hard work. Really love the work you do.
OK so I made the leap and dirty flashed this over my current setup. Now I'm having issues with gmail fc'ing. So I uninstalled it thinking that may help. So I tried to install it from the play store and it says "incompatible update"??? Now I can't even sideload it as it tells me " application not installed". Any ideas as to why its doing this?
---------- Post added at 12:59 PM ---------- Previous post was at 12:47 PM ----------
OK so something weird just happened... I went into recovery to fix permissions to see if that would help and gmail was somehow reinstalled... Its still not working but weird.
---------- Post added at 01:04 PM ---------- Previous post was at 12:59 PM ----------
Disregard my previous posts. Its working now.
I'm really liking the ZV6 update! The ROM is smooth and no lag noticed. I was able to pick up cell signal quickly. Great Job!
I flashed this ROM, updated PRL/Profile and then flashed Sac 2. How can I verify that the modem stuck?
klarthur said:
I flashed this ROM, updated PRL/Profile and then flashed Sac 2. How can I verify that the modem stuck?
Click to expand...
Click to collapse
Go to Settings>About>Software. There will be 2 lines of numbers for the modem now.
It'll stick as Sacs doesn't include kernel or modem.
engine95 said:
Go to Settings>About>Software. There will be 2 lines of numbers for the modem now.
It'll stick as Sacs doesn't include kernel or modem.
Click to expand...
Click to collapse
I have two lines for Baseband. Would that be the same thing as the modem? Thank you for your time!
klarthur said:
I have two lines for Baseband. Would that be the same thing as the modem? Thank you for your time!
Click to expand...
Click to collapse
You got it.
A couple of questions. I have bump and twrp installed and rooted on zv4, everything else is stock, except the kernel. I flashed the oversharpening fix kernel. Can I apply this zv6 update to my phone without wiping data and keeping the fixed kernel? Also, should I download the odex or deodexed?
bryster126 said:
A couple of questions. I have bump and twrp installed and rooted on zv4, everything else is stock, except the kernel. I flashed the oversharpening fix kernel. Can I apply this zv6 update to my phone without wiping data and keeping the fixed kernel? Also, should I download the odex or deodexed?
Click to expand...
Click to collapse
You can probably dirty flash. But you will lose the kernel.
Obviously my recommendation is to start from scratch as there's enough changes/fixes in this update to give you issues.
On the odexed vs deodexed, you can Google it for a better explanation. But the simple answer is: Deodexed is way easier to Theme. But Odexed is said to run a bit faster/smoother because it caches the apps. If I remember that right.
Really the choice is up to you. If you want to Theme it, then you'll need deodexed.
engine95 said:
You can probably dirty flash. But you will lose the kernel.
Obviously my recommendation is to start from scratch as there's enough changes/fixes in this update to give you issues.
On the odexed vs deodexed, you can Google it for a better explanation. But the simple answer is: Deodexed is way easier to Theme. But Odexed is said to run a bit faster/smoother because it caches the apps. If I remember that right.
Really the choice is up to you. If you want to Theme it, then you'll need deodexed.
Click to expand...
Click to collapse
I dirty flashed the deodexed version and when i booted the phone up, i keep getting com.android.systemui has stopped, and I can't do anything with the phone. Any fix in mind? For reference, my dpi was changed, so that may be the issue, i'm not sure
bryster126 said:
I dirty flashed the deodexed version and when i booted the phone up, i keep getting com.android.systemui has stopped, and I can't do anything with the phone. Any fix in mind? For reference, my dpi was changed, so that may be the issue, i'm not sure
Click to expand...
Click to collapse
Clean install.
If you used an app to change DPI, then that's probably the issue. You need to wipe data also.
If through the build.prop, then it should've been OK.
You might be able to dirty flash the odexed as that's like factory.
Again, were taking about a factory update so it really should be a clean install.
Anyone having issues with Android Wear and ZV6? When connected to my Moto360 I get running sync loop. The only thing I haven't tried is resetting the phone and watch.
Since the update is already signed by LG, we should be able to use flashify if we have stock recovery and rooted. Is that correct? I know that I should bump TWRP, but I was holding off till lollipop. Just looking to do a dirty flash.
Sent from my LGLS990 using XDA Free mobile app
MikeDroid said:
Since the update is already signed by LG, we should be able to use flashify if we have stock recovery and rooted. Is that correct? I know that I should bump TWRP, but I was holding off till lollipop. Just looking to do a dirty flash.
Sent from my LGLS990 using XDA Free mobile app
Click to expand...
Click to collapse
I know Flashify has had issues in the past with these Roms. That's why I recommend doing it in TWRP.
If you have TWRP already why Bump it again?
Maybe I'm misunderstanding.
Edit. I wouldn't think stock recovery would flash this. It's using bits and pieces of ZV6 but not all of it.
And I think the updater-scipt would make it fail. I may be wrong though.
engine95 said:
I know Flashify has had issues in the past with these Roms. That's why I recommend doing it in TWRP.
If you have TWRP already why Bump it again?
Maybe I'm misunderstanding.
Click to expand...
Click to collapse
I'm stock recovery and rooted. Since I haven't bumped TWRP, I thought I could flashify and avoid the 5 second TWRP delay issue by holding off on a custom recovery until we get the stock rooted version of lollipop. You and autoprime have always given solid advice and as such I will take your suggestion.
Sent from my LGLS990 using XDA Free mobile app
MikeDroid said:
I'm stock recovery and rooted. Since I haven't bumped TWRP, I thought I could flashify and avoid the 5 second TWRP delay issue by holding off on a custom recovery until we get the stock rooted version of lollipop. You and autoprime have always given solid advice and as such I will take your suggestion.
Sent from my LGLS990 using XDA Free mobile app
Click to expand...
Click to collapse
And again, I'm outta Thanks, so Thank you.
The 5 sec delay I talked about has disappeared for me now. But then I've flash about a million Roms in the last few days.
Others aren't getting the delay at all.
I guess what I'm saying is you don't need to reflash Bump TWRP. It works just fine. Even if you get that slight delay. Eventually it'll go away.
Edit. Get TWRP installed now. Have some fun with whatever Rom you want to try. Personally I'm not expecting Lollipop til next year. If it happens sooner great.
engine95 said:
Get TWRP installed now. Have some fun with whatever Rom you want to try. Personally I'm not expecting Lollipop til next year. If it happens sooner great.
Click to expand...
Click to collapse
I will get TWRP and have some fun when I get back. I'm traveling right now, so I'd rather be at home if something goes awry.
Sent from my LGLS990 using XDA Free mobile app
Q&A for [Lollipop] 5.0 System, Boot and FOTAKernel Images
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Lollipop] 5.0 System, Boot and FOTAKernel Images. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Boot Kernel cannot be used by flashtools , the error massage showed" image is not a boot image" how to fix this problem? i need some help~~
Aaronfuji said:
Boot Kernel cannot be used by flashtools , the error massage showed" image is not a boot image" how to fix this problem? i need some help~~
Click to expand...
Click to collapse
What are you trying to do with the files?
blueether said:
What are you trying to do with the files?
Click to expand...
Click to collapse
we need toflash boot.img before flashing rom, correct?
Aaronfuji said:
we need toflash boot.img before flashing rom, correct?
Click to expand...
Click to collapse
These files are not meant for flashing.
Xperia Z Ultra GPE 5.0 update
My first install of the OTA update resulted in an error, so I did some research and found out that my phone can't be rooted. So after unrooting through superuser and doing a factory reset, i finally received the OTA update again today, yet i still get the same error. The phone will reboot to install the update and the status bar will stop and the screen will show the android on his back and say error, then i have to force shutdown to boot my phone back up.
So I started out with a Galaxy S4. Which was easy to do anything and everything with a simple Google (GOOGLE FAHTAGAN!!!!) search. Now I have a Sony Z Ultra GPE, and I love it, but doing things is exceedingly more difficult due to its relative obscurity. Also, I am a truck driver. I work at night hauling 2 28" trailers for FedEx, so I am a dabbler not an expert by any means. My one great skill is I can follow directions! So, the groundwork having been laid:
Is there a step by step thread someplace on how I can gain root access? I have Android Lollipop 5.0 on my Sony Xperia Z Ultra GPE. I just want to fix the sdcard thingy and make the Archer Pirate Virus my loading animation. :fingers-crossed::good:
Sent from my C6806_GPe using XDA Free mobile app
HULK SMASH!!!! said:
So I started out with a Galaxy S4. Which was easy to do anything and everything with a simple Google (GOOGLE FAHTAGAN!!!!) search. Now I have a Sony Z Ultra GPE, and I love it, but doing things is exceedingly more difficult due to its relative obscurity. Also, I am a truck driver. I work at night hauling 2 28" trailers for FedEx, so I am a dabbler not an expert by any means. My one great skill is I can follow directions! So, the groundwork having been laid:
Is there a step by step thread someplace on how I can gain root access? I have Android Lollipop 5.0 on my Sony Xperia Z Ultra GPE. I just want to fix the sdcard thingy and make the Archer Pirate Virus my loading animation. :fingers-crossed::good:
Sent from my C6806_GPe using XDA Free mobile app
Click to expand...
Click to collapse
If you are on 5 already and haven't rooted and backed up the TA partition on 4.4.4 the you are buggered if you want to keep a working camera
So, yes I had rooted 4.4.4. I unrooted, backed up my TA partition, the used ADB to sideload stock 5.0. So now my question is how do I reroot? So far I've used Geohot's towelroot. So what do I do now?
Sent from my C6806_GPe using XDA Free mobile app
HULK SMASH!!!! said:
So, yes I had rooted 4.4.4. I unrooted, backed up my TA partition, the used ADB to sideload stock 5.0. So now my question is how do I reroot? So far I've used Geohot's towelroot. So what do I do now?
Sent from my C6806_GPe using XDA Free mobile app
Click to expand...
Click to collapse
Unlock the bootloader if it is locked (you didn't have to restore the TA/lock the bootloader to OTA to 5.0)
then either
Hotboot DooMLoRD's V2 kernel [fastboot boot <path_to_boot.img>]
Boot into temp recovery
Flash superSU from recovery
or
Fastboot DooMLoRD's rooted system/boot/etc .img in the dev section (I've not tested this)
[fastboot flash <partition_name> <partition.img>]
I hope that makes sense
5.1
maybe in this post?
http://forum.xda-developers.com/xperia-z-ultra/help/qa-aospa-l-togarigpe-stayparanoid-t3129395#post61211948
I am C6802 GPE & 14.5.A.0.242 & unrooted & locked bootloader
look for to update it to 5.1 like you as well
Q&A for G900TUVU1DOB1_G900TTMB1DOB1_TMB - Download
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for G900TUVU1DOB1_G900TTMB1DOB1_TMB - Download. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Lollipop galaxy s5 tmobile
Would you lose root?
Would metro pcs galaxy s5 beable to flash this
Blitztex said:
Would you lose root?
Click to expand...
Click to collapse
yes most likely. these tars don't wipe data, but they do disable root and replace a custom recovery with the stock recovery.
---------- Post added at 10:18 PM ---------- Previous post was at 10:14 PM ----------
What are people doing to root and install TWRP with this latest version?I read that CF Auto-root for the 900F on 5.0 was working, is that true for the 900T as well? And is the latest Odin-flashabel TWRP working with this update?
Dr. Fed said:
What are people doing to root and install TWRP with this latest version?I read that CF Auto-root for the 900F on 5.0 was working, is that true for the 900T as well? And is the latest Odin-flashabel TWRP working with this update?
Click to expand...
Click to collapse
Yes the 900t works. My steps posted here: http://forum.xda-developers.com/showthread.php?p=58967459
Sent from my SM-G900T using XDA Free mobile app
your garbage links ,mirrors, are an absolute waste of time.
am i missing A RIDICULOUSLY OBVIOUS SECRET SOCIETY STEP IN *trying* to use THE MOST LIKELY BAD LINKS YOUVE SO GENEROUSLY GIVEN??
IM BAFFLED,....DONT GET IT IVE NEVER HAD SO MUCH GODDAMN TROUBLE ACQUIRING, THEN ATTEMPTING TO OPEN A FILE FROM A LINK.here of all places???? this is outright bull
downloaded from wack mega
attempted to unzip.......FAIL ........"
The link was perfect for me don't know why you're freaking out
OMGitsAlize said:
The link was perfect for me don't know why you're freaking out
Click to expand...
Click to collapse
Sounds like they got up on the wrong side of the bed. I think it is entirely user error.
To the one thay asked about putting Lollipop on the Metro s5 You Can definitely flash the Lollipop tar on a metro s5 But that will make your firmware completely Tmobile based.
Make sure u back up Metro s5 4.4.2 with twrp
Also latest twrp flashed fine on my Tmobile S5 on Lollipop official
Sent from my SM-G900T using XDA Free mobile app
I recently flashed this yesterday with odin. Everything is working great, love it. only issue I have been experiencing isnt really much of an issue but rather just annoying. For some reason I am unable to change any text notification sounds. No matter what I do it is stuck on the whistle notification. Ive even booted back into recovery and tried to wipe cache again and that doesnt seem to work either. I already performed a factory reset in recovery before first boot. So idk. anyone know what the issue could be?
---------------
Sent from my SM-G900T using XDA Free mobile app
Hi I flashed the new lollipop firmware and I keep getting a random popup every so often saying "contacts has stopped working" my contacts work fine it pops up at random times. I wiped cache , flashed back to 4.4.2, flashed back to 5.0, and am still getting this random poPup! Has anyone else experienced this, and is there a solution? Thanks in advance
zmdixon87 said:
Hi I flashed the new lollipop firmware and I keep getting a random popup every so often saying "contacts has stopped working" my contacts work fine it pops up at random times. I wiped cache , flashed back to 4.4.2, flashed back to 5.0, and am still getting this random poPup! Has anyone else experienced this, and is there a solution? Thanks in advance
Click to expand...
Click to collapse
Try either a different kernel or a custom ROM. And Missie site your on lollipop bootloader/modems.
Sent from my SM-G900T using XDA Free mobile app
androidfine16 said:
Try either a different kernel or a custom ROM. And Missie site your on lollipop bootloader/modems.
Sent from my SM-G900T using XDA Free mobile app
Click to expand...
Click to collapse
I am stock not rooted. Used Odin to do all flashing after I first did Ota 5.0 update. Without rooting what would you suggest?
Q&A for [ROM] kk 4.4.4 [N900PVPUDNK4] NO KNOX [DEODEX]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] kk 4.4.4 [N900PVPUDNK4] NO KNOX [DEODEX]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
update to 4.4.4 missed something
Been on android for years and my old account here is gone so starting anew. I fflashed the new modem and bootloader, everything is good minus one thing. I followed the post since i was on nc5 and forgot to disable my lockscreen. After update i couldnt get into my phone so i did a full reset, factory reset, formatted phone, cleaned dalvic the works and everything works except when i goto assign a lockscreen i can only do swipe or pattern, nothing else works. When i click on pin it goes through and acts like it set but never sets. Im confused, tried 2 different roms from this thread to same effect.
mi3 modem possible?
Im on NC5 with MI3 Modem,
Can I flash the MI3 modem after following the procedure in the OP and still work?
Thanks
First ive been doing this for about 5 years or longer. Im on nk4 stock but wanted to flash your deodex debloated rom. I used twrp to wipe and flash. Everything flashed fine it seemed. It got stuck at the Samsung screen and wouldnt go past it. Any ideas what i need to do to make this work?
Sent from my SM-N900P using XDA Premium HD app
Is it possible to receive OTA notifications on this ROM? Got word that Sprint is pushing 5.0 and wondering if I could catch it. I know it's mostly stock and status usually states official but with the kernel mod I wasn't sure.
Sent from my SM-N900P using Tapatalk 2
Is the Hotspot unlocked on this rom?
Sent from my SM-N900P using XDA Free mobile app
shipolleh said:
Im on NC5 with MI3 Modem,
Can I flash the MI3 modem after following the procedure in the OP and still work?
Thanks
Click to expand...
Click to collapse
Better late than never, no you cannot use MI3 Modem. You need to be on KK.
---------- Post added at 11:12 AM ---------- Previous post was at 11:06 AM ----------
marquan66 said:
Is the Hotspot unlocked on this rom?
Sent from my SM-N900P using XDA Free mobile app
Click to expand...
Click to collapse
No it is not, this ROM is basically Stock with exception of being deodexed and having Knox removed. Your best bet is to find a copy of Galaxy Tools v 3.1.5 or v 3.1.8 and that will enable the HotSpot on this ROM.