Hi All,
I've just joined the forum to make a post after the past couple of weeks of reading through the numerous posts for the Nabi 2. I'm really stuck and I've exhausted all my options and could really do with some advice as Nabi customer support is non existent!
When I bough the Nabi 2 a couple of years ago I decided to do the hack to get Google Play installed but after a while there were a few glitches and as Nabi had released OTA updates with Google Play included I decided to return my Nabi 2 to stock and try the OTA updates to bring it right up to date. And i've had nothing but problems since.
I've managed to install the 1.9.12 (Original UK Stock) downloaded from teh Nabi 2 page on this site and the plan was to apply the OTA updates however I have no wifi. I've installed the wifi fix which didn't help, I've looked at my wpa_supplicant.conf file which looks like this...
update_config=1
ctrl_interface=wlan0
eapol_version=1
ap_scan=1
fast_reauth=1
I've even deleted the file and let the system recreate it from scratch but WIFI still won't enable.
I've found no OTA (UK) updates that I can install manually so i donlt know where to go from here. Could anyone advise what I can try next as I feel like I really don't know what to try next.
Can I skip going right back to the first version and leapfrog to versions >2 by installing them via TWRP? Ideally I need to keep using the UK versions if that's possible.
Here's how it looks at present
Android Version 4.0.4
Product Version 1.9.12-release-keys
What I have noticed which I don't quite like is that under Wifi settings it states the MAC Address as Unavailable? IP Address Unavailable I can understand but should the MAC address not be Hard coded to the device? Unless it's the MAC Address of the Wireless Router it's connecting to maybe?
Any advice would be greatly appreciated.
Thanks
Ryan
ryanwoodward said:
Hi All,
I've just joined the forum to make a post after the past couple of weeks of reading through the numerous posts for the Nabi 2. I'm really stuck and I've exhausted all my options and could really do with some advice as Nabi customer support is non existent!
When I bough the Nabi 2 a couple of years ago I decided to do the hack to get Google Play installed but after a while there were a few glitches and as Nabi had released OTA updates with Google Play included I decided to return my Nabi 2 to stock and try the OTA updates to bring it right up to date. And i've had nothing but problems since.
I've managed to install the 1.9.12 (Original UK Stock) downloaded from teh Nabi 2 page on this site and the plan was to apply the OTA updates however I have no wifi. I've installed the wifi fix which didn't help, I've looked at my wpa_supplicant.conf file which looks like this...
update_config=1
ctrl_interface=wlan0
eapol_version=1
ap_scan=1
fast_reauth=1
I've even deleted the file and let the system recreate it from scratch but WIFI still won't enable.
I've found no OTA (UK) updates that I can install manually so i donlt know where to go from here. Could anyone advise what I can try next as I feel like I really don't know what to try next.
Can I skip going right back to the first version and leapfrog to versions >2 by installing them via TWRP? Ideally I need to keep using the UK versions if that's possible.
Here's how it looks at present
Android Version 4.0.4
Product Version 1.9.12-release-keys
What I have noticed which I don't quite like is that under Wifi settings it states the MAC Address as Unavailable? IP Address Unavailable I can understand but should the MAC address not be Hard coded to the device? Unless it's the MAC Address of the Wireless Router it's connecting to maybe?
Any advice would be greatly appreciated.
Thanks
Ryan
Click to expand...
Click to collapse
Jump straight to 2.2UK?
http://forum.xda-developers.com/showpost.php?p=50431606&postcount=98
That's the template for how to do it. Ask if you have questions.
Related
Hi all,
I'm hoping someone has a suggestion.
I used the All-In-One tool to root my tablet S months ago, and received constant notificationst hat an OTA update was available. So I used the All-in-one tool to disable the notifications.
This morning I changed my region from Australia to US using the All-in one-tool and re-enabled notifications to see if it would receive the ICS update, but when I went to Settings-About-System Update, it goes straight to "Failed to download the update. Check your network connection and try again". I am connected to a Wi-Fi connection and the itnernet is working.
I then restored my original region settings using the all-in-one tool, but I still get the same message. Previously it said that an update was not available.
Any ideas?
I didn't root my tablet so I can't help you solve the OTA issue, but may I suggest following condi's guide here?
http://forum.xda-developers.com/showthread.php?t=1515720
PS: theres also the full OTA downloadable in that thread.
Thanks for the reply. I looked at the guide, but a lot of people seem to be bricked after trying to follow it. So I decided to wait a bit.
The issue seems to have resolved itself now. Perhaps the server was down?
Hi guys!
I came to you as my last option, I already checked in 2 other forums and you seem to be the one who knows best about this kind of issues.
I have a I9100 phone (with gingerbread 2.3.4 updated via Kies), it has like 6 months old or so, the thing is yesterday I was at my gf house and I tried to connect to her WiFi but it seems like the green button was kind of dark and it didn't connect at all, like it froze sometimes.
I used to reboot the phone and nothing seemed to work, so I forgot about it for like an hour and when I checked it, it was working with the WiFi with no problem, I thought this was just some minor issue, but later that day the problem became a mayor thing because I couldn't connect to the WiFi no matter what I did or how much I waited. I know my way around computers and I could identify that in the wireless option the Mac Address option said "UNAVAILABLE".
Looking in the forums they said this happened because of the kernel and it seemed to go away with just upgrading the stock, so I found a very good upgrade and I did it via Odin, so now I have ICS 4.0.3 with the following configuration:
BASEBAND VERSION: I9100XXLPX
KERNEL VERSION: 3.0.15
[email protected] #k3-25
BUILD NUMBER:
IML74K.XWLPG
Searching for this on the web I found something about the MAC ADDRESS in the nvram file, but when I checked that file, in the "macaddr" part it says a Mac Address that I think is the one that should be, so I'm a little but confused because the file says I have a MAC Address but the options on the phone doesn't (?)
I've tried the airplane mode, etc... I cannot assign an static IP because I cannot find any network!
Please guys, you are seriously my only hope!!!
Thanks a lot!!!
WiFi Help!!! (Possible MAC Address malfunction)
Emilioenlima said:
Hi guys!
I came to you as my last option, I already checked in 2 other forums and you seem to be the one who knows best about this kind of issues.
I have a I9100 phone (with gingerbread 2.3.4 updated via Kies), it has like 6 months old or so, the thing is yesterday I was at my gf house and I tried to connect to her WiFi but it seems like the green button was kind of dark and it didn't connect at all, like it froze sometimes.
I used to reboot the phone and nothing seemed to work, so I forgot about it for like an hour and when I checked it, it was working with the WiFi with no problem, I thought this was just some minor issue, but later that day the problem became a mayor thing because I couldn't connect to the WiFi no matter what I did or how much I waited. I know my way around computers and I could identify that in the wireless option the Mac Address option said "UNAVAILABLE".
Looking in the forums they said this happened because of the kernel and it seemed to go away with just upgrading the stock, so I found a very good upgrade and I did it via Odin, so now I have ICS 4.0.3 with the following configuration:
BASEBAND VERSION: I9100XXLPX
KERNEL VERSION: 3.0.15
[email protected] #k3-25
BUILD NUMBER:
IML74K.XWLPG
Searching for this on the web I found something about the MAC ADDRESS in the nvram file, but when I checked that file, in the "macaddr" part it says a Mac Address that I think is the one that should be, so I'm a little but confused because the file says I have a MAC Address but the options on the phone doesn't (?)
I've tried the airplane mode, etc... I cannot assign an static IP because I cannot find any network!
Please guys, you are seriously my only hope!!!
Thanks a lot!!!
Click to expand...
Click to collapse
No one can answer this thread? Seriously? There has got to be a solution!
Hmmmm....Interesting.
So you can use the phone normally otherwise ? (data/calls work OK ?). Check your IMEI in settings/about phone/status. Does it begin with 0044 ? Do not post your actual IMEI here, a yes/no answer will do.
Also, I noticed you're running Speedmod with that LPG rom, I suspect the kernel is causing you problems given WiFi drivers are in the kernel. In the first instance, if I were in your situation, I'd flash that rom again & do a factory reset, and try WiFi with the stock kernel (look in the place/site/thread you got that stock rom from, you might be able to find just the kernel. If you can, just flash the kernel rather than flashing the whole rom).
If the problem is still happening with stock kernel, then we can troubleshoot further. If not, then it's clearly a problem with Speedmod; if that's the case you should perhaps ask for help in the Speedmod thread.
But reflash that rom & get the stock kernel back on & we'll take it from there.
I had EXACTLY the same issue
Solved it by changing my wifi router channel from Auto to 13. Problem solved. For me anyway
Sent from My Omega powered beast, using Xparent ICS
Hi everyone! I recently got a TF700 with the hopes of unlocking and rooting it to get at all the custom ROM goodness. Sadly, I'm having a few problems. Before doing anything I successfully upgraded to JB 4.1.1, so I know that my updates were working. After playing around with it for a few days and doing my research, I was ready to proceed with unlocking using a YouTube guide. Before starting the process, I checked for new updates and got the "Internet connection error or the server is busy. Please wait a moment and try again" message.
Since I was already on the firmware I needed, I figured that maybe the servers actually were full and forgot about it. I proceeded to get the Asus Unlock tool onto my tablet via ADB Tool v7, but when I got past all the warnings, I ended up getting a similar message. I called Asus and they said that the servers were fine on their end, and that I should RMA the tablet to them. I'd rather not do that because I don't want to wait 3 weeks for them to fix this random issue, but I also really want to unlock my tablet .
Has anyone got any solutions or suggestions? I'm just confused because I know that my tablet could connect to the Asus servers since I had previously updated with no problems, and I haven't done anything but play around with apps from the app store since then...
Ive got an android tablet that is having trouble after rooting with kingroot.
Worked fine for a while after rooting, main reason I rooted was to remove the bloatware installed (full of disney apps etc)
After removing the apps, then i started having trouble after reboot, and the following message keeps appearing and wont go away.
"unfortunatley, the process com.android.systemui has stopped"
Hopefully im asking in the right area here, but im hoping i can find a decent firmware with the bloatware removed , and hope that flashing will fix this once and for all at the same time.
What complicates this is that this model is for the New Zealand market and i think they are renaming another model number for New Zealand.
If another firmware is available that i can flash onto this tablet, it would be great thanks
Specs:
Its produced by southernTelecom
Model: ST10NZ
Android 4.42
firmware 2.01
kernel version 3.4.67
build number
ST10_20141217
BN: (another build number) 01.04.006.074.07
bump
Here is a link to the product.
https://www.pbtech.co.nz/index.php?...ab-ST10-10-Android-Tablet-for-Kid--Work---Qua
Bumping.
Anyone able to help find a ROM?
bump
If it's any help, I'm having the same problem, still unable to find a solution, mines the ST13, but have the same problem with "com.android.systemui" - Be keen if you find a solution, I'm happy to restore the original ROM (or custom) but unable to find either as yet.
Here's hoping...
net nanny
waynez2016 said:
If it's any help, I'm having the same problem, still unable to find a solution, mines the ST13, but have the same problem with "com.android.systemui" - Be keen if you find a solution, I'm happy to restore the original ROM (or custom) but unable to find either as yet.
Here's hoping...
Click to expand...
Click to collapse
net nanny is hardcoded and dont remove netlauncher 3 . if you deleted it, it breaks the android.ui and there is no recovery image.
If anyone can come up with a ROM image, that would be great.
I also have been told here to try downloading net nanny off google play.
Apparently that works.
waynez2016 said:
If it's any help, I'm having the same problem, still unable to find a solution, mines the ST13, but have the same problem with "com.android.systemui" - Be keen if you find a solution, I'm happy to restore the original ROM (or custom) but unable to find either as yet.
Here's hoping...
Click to expand...
Click to collapse
Im looking for the stock ST13 firmware & ROM any chance you can upload i have three I've burned through and my backup got tainted?
XxKodedxX said:
Im looking for the stock ST13 firmware & ROM any chance you can upload i have three I've burned through and my backup got tainted?
Click to expand...
Click to collapse
If a ROM could be found it would be great.
I got mine working again after reinstalling the netnanny app from the play store, fixed it. But it still does not run flash.
Net nanny
re downloading net nanny from the play store does work, at least to get it working again. I had a problem that after that message popped up a few times (com.android.systemui failed to load) or whatever, I couldnt click on anything. AFTER I factory reset the tablet, that problem stopped. The message kept popping up, but I was able to click "OK" and type a few letters on the setup page lol. I got into the play store, found net nanny, downloaded it, and SHAZAM! Its working again. i JUST WANT TO PLAY MY GAMES LOL. THANKS TO WHOEVER FOUND THIS OUT! I hope this helps the next person that un-installs net nanny lol. BTW, I contacted southern telecom and said I got a virus or whatever and requested a website to download the firmware, so if they give me that information, I will share it with you all
Any news on that link for the firmware
Playing with a ST13 now, the os disappeared and tablet is stuck at bootloader, unable to do anything at this point. Windows does not recognize tablet and now I am out of options.
Anyone have any ideas thoughts?
Hi, this is my first time posting on xda forum, so if my post has some problems, I'd be delighted to correct.
So, I bought the Huawei Honor Pad 2 tablet about a year ago, and about last month it asked me to upgrade the system, and after the upgradation, the wifi icon becomes greyed out and I'm unable to turn it on. I tried to factory reset and wipe its cache partition but still no luck.
I dont know whether to flash its firmware would solve the problem but a few sites I stumbled upon, none of the links works(e.g. huawei-firmware rom links for my tablet model number don't work)
Some searches suggested it could be my hardwares malfunctioning, but since the wlan option greyed out problem only occurred immediately after the system update, I wonder if reflashing a new rom would work.
So I have run out of ideas, also I could not find honor pad 2 on the official huawei website, nor on xda forum, it mostly gives me mediapad as a result, but they seem different on pictures.
And some specs about my tablet:
Model: JDN-W09
Build Number: JDN-W09C233B023
EMUI Version: 4.0.3 (can't remember the original version but this is the one I got after that horrible system update)
Any helps are greatly appreciated!
up
up
uuuuuuuuugggggggggghhhhhh
Hi,
I had the same update,and we have the same specs,but tell me please how did you manage to get google play and all other google things to work?Maybe its because you are rooted?
It seems we are the only ones that we have this tablet,cos i can't find anything about rooting it or solve the google play problem without rooting.The worst thing is that nobodys bothering to make a post about it cos maybe the tab had been bought by a few people.
I don't have your problem,mine is working ok but my problem is way greater.I have done cache clears,download and intstall google services several times and some other tricks that i found on the net but nothing seems to work.
One click rooting methods:none of them work!
The οnly sure thing that we both need is a guide of how we are going to update the firmware to an earlier version(stock firmware)
Here on XDA i found only guides for phones of honor or tabs like media pad m2 that they seem to be similar but yet...i'm not sure.
I hope someone will take the time to answer on your post and our problems with this awesome tab!
I have also upgraded my Honor Pad 2 JDN-AL00 model to EMUI 4.0.3 B023 latest firmware and faced similar issues of Google apps not able to run anymore. I have tried to rollback the update by reflashing with older firmware versions. The update process shows success but when I boot up the set it still shows B023.
After researching the net, I think the problem could be because the older firmwares found in huawei-firmware.com are all OTA which means they are incremental updates. To fully rollback to earlier versions, I think we need Full OTA firmware. So far the only one that I can find on the net is B018 version. It’s abt 1.7GB. I have not gotten down to test out my theory. If you’re keen you can give it a shot and let everyone here know if it works...