Related
I've got around 4 different micro-USB AC Adapters that I have lying around. One is the OEM Lenovo, One is OEM Samsung (i777 charger + Samsung Micro-USB cable), one is a multi-USB port AC adapter with a micro-usb cable, and the last is an iPad 2 wall charger with a micro-USB cable.
ALL of the chargers except the OEM Lenovo ones don't charge my tablet. When It's plugged in, for a couple of seconds it says Charging (AC), and then it just switches to discharging. I've tried all the aforementioned chargers and cables in different combinations, and the ONLY ones to work correctly is the Lenovo combo.
Is there a specific reason to this? Also tried all 4 cables connected to my PC.. They all don't charge efficiently at all.
look at the Voltage and Amperage of the adapter !
Lenovo use 2A if I remember well, the other use only 1A
quyTam is correct... most USB chargers are between 500mA and 850mA. The dual battery design of the tablets requires a min of 2A to charge correctly. This is why most computer USB ports will not charge the device.
However... the changer isn't the only thing restricting the power. The cable you are using can also effect power. Not all cables are created equal.
I stopped by Staples just after getting my tablet and picked up a 4 port 2.1A USB wall charger. It will charge my phone, Bluetooth, and tablet. There are also really nice 2A "extra battery" devices out there that allow you to a charged battery with you that will power and recharge your device.
I also recommend the dock for the tablet... it has a 65w power supply and charges the tablet in a 1/3 the time then the usb chargers.
where to get a charger
i tried 2Amp chargers....didn't help/
my brother says:
"the pins are slightly different/off/longer/shorter/what DID lenovo do here?"
as a safety i bought:
http://www.ebay.com/sch/?_kw=886605022780&_clu=2&_fcid=100&_fvi=1&_localstpos=&_stpos=&gbr=1
just in case...
it costs an arm and a leg for a microUSB charger, but not charging the device for a couple of days would cost me more :S
just another things that makes the TPT slightly less then perfect
o,O
Charger
I use a Dell Axim x51 charger and an LG cable from an old phone. Seems to work very well and eBay prices for the charger are less than $4.
http://rootzwiki.com/topic/8523-rev...arger/page__st__40__gopid__448194#entry448194
In my experience a 1A charger will also work. Nothing less than 1A will do anything.
I keep my Lenovo charger in my home office and use a 1A phone charger next to my bed for overnight charging.
I too have a 4 port mains to USB charger: 2A but I thought it was distributed to the 4 ports. If all were being used then each port would only be .5A.
Will have to try it out. If it works it would lighten the travel load of chargers.
Gottoon said:
quyTam is correct... most USB chargers are between 500mA and 850mA. The dual battery design of the tablets requires a min of 2A to charge correctly. This is why most computer USB ports will not charge the device.
However... the changer isn't the only thing restricting the power. The cable you are using can also effect power. Not all cables are created equal.
I stopped by Staples just after getting my tablet and picked up a 4 port 2.1A USB wall charger. It will charge my phone, Bluetooth, and tablet. There are also really nice 2A "extra battery" devices out there that allow you to a charged battery with you that will power and recharge your device.
I also recommend the dock for the tablet... it has a 65w power supply and charges the tablet in a 1/3 the time then the usb chargers.
Click to expand...
Click to collapse
That's for sure. I thought the dock was a waste of money until I forked out on Amazon. Saves so much time it isn't funny....
Sent from my Nexus S using xda premium
The tablet needs to see 5.3 V, when using >500mA.
Already thinner USB-Cables increase the voltage drop
so the thinkpad wont charge, even with the original charger.
It may have less to do with your charger than with the cables. I bought extra long (6 and 10 ft) USB cables for charging phone and my TPT. The 28AWG of any length won't charge the TPT. The 24AWG 6 ft and 10ft cable *will* on a 2A charger. I haven't tried other combinations. I believe it will charge on a 1A charger as well, but would likely require the larger 24AWG cable.
Sent from my PC36100 using Tapatalk
Design Flaw in Thinkpad Tablet prevents Landscape Mode Charging for Developers
I actually sent my 1838-22U in for service, thinking that there was a hardware problem preventing charging while connected via USB. At first I had noticed that while connected directly to a PC via USB for development purposes (no docking station), the unit indicated that it was charging. However, it seemed to be discharging faster than it was charging and slowly worked its way down to unusable. Lenovo Tech Support indicated that they had heard of this happening, and that I should send it in to have its system board replaced. I sent it in only to find that all they had done was replace the battery and reload the firmware. I did notice, however, that when I connected the USB cable, it appeared to go into charging mode for a couple of seconds then switch into discharge mode. I asked Tech Support about this and they said they this was actually the way it should have been behaving all along, and that this was by design.
The User Manual (see attachment) states only that it might not charge, and that it will only discharge if the tablet "exceeds USB 2.0 power limits" (i.e. 500ma).
Well, the Thinkpad Tablet seems to be pretty good at doing that.
Here's where I present to the development community a conundrum. How can one develop in landscape mode while charging (even slowly)? In portrait mode, one can use the accessory docking station, which uses its own charger and charges through the proprietary connector next to the micro USB port, while separately allowing the USB to be used for data. In landscape mode, there is no such option. I will accept that the unit may draw too much current to charge well via a 500ma USB data connection, but then Lenovo should provide a optional charger that connects directly to the same proprietary connector used by the docking station. This is done elsewhere. For instance, Motorola realizes that the Xoom draws too much current to charge via a USB data connection, so they don't even bother with it - they provide a dedicated charger connection and charger.
==UPDATE== 25-May-2012
SOLUTION FOUND
The solution to using a data connection and charging the Thinkpad Tablet at the same time, without relying on the portrait-mode-only Dock Station, is to connect through a powered USB hub which supports the USB Battery Charging Specification (with a Charging Downstream Port). The specification provides at least 1.5A, which quite handily satisfies the Thinkpad. I found such a hub, the GWCTech HU2V40, on Amazon for $15.99.
If you get this model, note that only one of the 4 ports can be used for high-current charging. It includes a tiny "Smart Charger Adapter" but which appears to block the data connection (at least when when used with the Thinkpad). In other words, ignore the little black passthrough adapter included with it, and plug directly in as you normally would. The instructions don't explain the purpose of the passthrough adapter.
Hi everyone!
I just wanted to ask this: I just bought a 90W charger for my laptop. It is a "Targus Compact Charger for laptop and usb tablet"
It charges my laptop and also has that usb port which charges through a cable, compatible devices. Only that on that usb port, it says that it charges 2.1A, which is a lot. My phone charger does only 550mAh.
So the question, shouldn't I charge my phone through the adapter?
Thanks in advance!
So my charger met with an untimely demise. I am unable to get my hands on a replacement one at the moment.
I am currently using my computer's USB port which as you will know doesn't give quite enough juice. I have seen a microusb charger with 5V and 2A. Will this do a job (and also not get rid of the message that i am drawing more juice than the battery is getting)?
I use the charger that came with my Evo 4g. It needs to sit overnight, but it charges to green.
milomak said:
So my charger met with an untimely demise. I am unable to get my hands on a replacement one at the moment.
I am currently using my computer's USB port which as you will know doesn't give quite enough juice. I have seen a microusb charger with 5V and 2A. Will this do a job (and also not get rid of the message that i am drawing more juice than the battery is getting)?
Click to expand...
Click to collapse
No.
The reason for the strange shape USB lead HTC have is that it gives 9V and 1.7A - 5V isn't going to cut it, it will charge but ever so slowly and if you try to charge whilst using it you'll probably find it doesn't, it just discharges more slowly.
If I were to take an old wall wart I have here that is 9V and 2A and wire a standard micro USB cable to it, would that work to charge my flyer quickly? In other words is the strange connector necessary or just the 9V and 2A?
Sent from my PG41200 using Xparent Purple Tapatalk 2
bsoplinger said:
If I were to take an old wall wart I have here that is 9V and 2A and wire a standard micro USB cable to it, would that work to charge my flyer quickly? In other words is the strange connector necessary or just the 9V and 2A?
Sent from my PG41200 using Xparent Purple Tapatalk 2
Click to expand...
Click to collapse
NO, because the fast charge requires the special connector on the HTC power cord , a micro-usb will not allow the Flyer to draw the high current.
DigitalMD said:
NO, because the fast charge requires the special connector on the HTC power cord , a micro-usb will not allow the Flyer to draw the high current.
Click to expand...
Click to collapse
so an adaptor with a usb slot and using the usb cable would work?
milomak said:
so an adaptor with a usb slot and using the usb cable would work?
Click to expand...
Click to collapse
If you're using the HTC-specific microUSB cable, the adaptor would have to provide the correct amount of power (9V and 1.7A). Most usb power adaptors do not provide the adequate amount. A little while back, I made the mistake of taking just my phone usb adaptor to charge everything on a trip out of the country for nearly two months. It worked great for everything except for my View. Even though I had the HTC-specific usb cable for the View, it was still like charging via a computer usb port. It would get the job done if I left it all day or all night, but it took forever to charge.
I really would try to track down an OEM charger. Even if you find a usb adaptor that puts out the right amount of power, it still might not provide the short amount of charging time that the OEM charger does. It should theoretically, but many users have had charging time woes when using anything but the OEM charger.
DigitalMD said:
NO, because the fast charge requires the special connector on the HTC power cord , a micro-usb will not allow the Flyer to draw the high current.
Click to expand...
Click to collapse
No it doesn't. A member of my site took the OEM charger, wired a 90 degree micro USB port to it, charges at full speed.
Sent from my Transformer TF101 using Tapatalk 2
Volts and Amps - PowerFlask
From the posts on this subject it seems that the Powerflask 13000 mAh powerbank I bought today and which charges at 5.3 volt with a 1amp and 2.5 amp port won't properly charge my flyer?
Can I safely use the 2.5amp port or should I rather stick to the 1amp port.
Any advice would be much appreciated.
Thanks
Maffs,
Maffs said:
From the posts on this subject it seems that the Powerflask 13000 mAh powerbank I bought today and which charges at 5.3 volt with a 1amp and 2.5 amp port won't properly charge my flyer?
Can I safely use the 2.5amp port or should I rather stick to the 1amp port.
Any advice would be much appreciated.
Click to expand...
Click to collapse
Folks on here have mentioned that the device (and other tablet/smartphone devices) will only draw the amount of current (amps) it needs. So using a charger with a higher amp rating is not a concern (in theory).
But I think others have debated this, and even made claims of higher volt/amp rated chargers damaging their devices (however anecdotal).
In any case, from the responses on this thread, it appears that any charger that doesn't have HTC's proprietary connector that they used for the Flyer, will charge the tablet very slowly. I just plugged my Flyer into a microUSB charger the other day (just got back from a trip, and my stock charger was still packed), and it charged extremely slowly. It was slower than I remembered it being. It was plugged in for maybe 4 hours, and only increased the charge by 10 or 15%.
PowerFlask Volts and Amps
Thanks for the feedback, much appreciated.
I ran a quick test and connected the Flyer to the battery pack.
The flyer charged from 76% to 84% in 30 minutes . I realise that such a short charge isn't a proper test but it looks promising.
I used the 1amp port and will as you cautioned avoid the 2.5 amp port.
Maffs
Seems ever since I updated to the latest OTA update, if I plug my phone in on certain chargers I get a notification stating slow charging enabled please connect to your factory charger. Anyone else having this issue?
It seems to do it on any charger or 12volt car to USB adapter capable of outputting 2 to 2.1 amps
Stock ROM, rooted, unlocked, s-off
Sent from my HTC6435LVW using Tapatalk 2
Slow Charge Message
arisch86 said:
Seems ever since I updated to the latest OTA update, if I plug my phone in on certain chargers I get a notification stating slow charging enabled please connect to your factory charger. Anyone else having this issue?
It seems to do it on any charger or 12volt car to USB adapter capable of outputting 2 to 2.1 amps
Stock ROM, rooted, unlocked, s-off
Sent from my HTC6435LVW using Tapatalk 2
Click to expand...
Click to collapse
Same here. Glad to hear it is not just me. I just got off with NA HTC Tech Support. There official stance is that they do not recommend or support using any device other than the official charging cable and plug in device. They went as far to say that they do not support charging in the car. I just about flipped my lid on the phone.
Here is the link to their site: http://www.htc.com/us/support/howto...783&p_name=droid-dna-by-htc-(verizon-wireless)
"Only the power adapter and USB cable provided in the box must be used to charge the battery"
I was told by Verizon that this was just a scare tactic, while HTC says I am not getting the right charge and they have no answer since they do not support DC charging in the car. Any info people have is appreciated. It works fine with Hard Wired DC -MicroUSB, but not with any USB Plug in.
Any apps that would help me measure the amount of charge it is getting?
Thanks in advance.
What are the specs on your car charger?
Sent from my HTC6435LVW using Xparent Red Tapatalk 2
So odd that they would do that, especially with the power draw of the phone. However you can charge using the battery packs?
My car adapter is a Macally USB car adapter model carusb10 output 5v/2.1 amp x1 500mA x2.
As for my house adapters the RCA 2 port USB wall adapter. 2.1 Amp x 1 or 1000mA x 2 I believe.
Sent from my HTC6435LVW using Tapatalk 2
Everyone with a stock DNA unplug your charger and flip it around. As in flip the prongs. It should give you this message even with the HTC supplied one. Or try this. When you use another charger and it gives you that message unplug it and flip it. It should straighten out. I dunno. Something about the way the power is drawn.
xcesivemastub8ah said:
Everyone with a stock DNA unplug your charger and flip it around. As in flip the prongs. It should give you this message even with the HTC supplied one. Or try this. When you use another charger and it gives you that message unplug it and flip it. It should straighten out. I dunno. Something about the way the power is drawn.
Click to expand...
Click to collapse
I have tried several different USB adaptors, from Razorfish(BestBuy), Belkin single USB input 2.1amp, innocell (RadioShack) dual SUB 3.1amp. Same problem on all.
On the other hand, any direct Wall connection with USB cable attached seems to work fine.
Also, I have the Motorola p4000 battery backup and when I plug that in, it also works fine and views it as AC.
Swapping the pins didn't work for me, same issue. Its a pita for me especially charging in the car because when using phone for navigation it charges so slow that it can't actually charge my phone and my battery decreases. I've went the route in the car I use my nexus 7 charger connected to an inverter.
Sent from my HTC6435LVW using Tapatalk 2
From my phone conversation with Seth from HTC Support, the slow charging warning is due to the update because the update incorporates the faster charging feature that qualcomm & htc have referenced too recently (can't remember what its actually called). The phone has a new type of charging setup that makes it charge faster than some other phones.
Unfortunately some chargers (wall/car) dont supply enough voltage to activate the charging feature so while the phone does charge fine (it charges at standard phone charge rate) it cannot charge at the faster rate due to the charger.
He states that this will not harm the phone and ther phone will charge fine and it a normal time. You can disregard the warning. For those that like the faster charge rate, you have to use the right charger/cable.
Before the update our phones were mostly charging at the slower rate and that's why most didn't see a warning unless the cable being used was below the standard rate of charge.
Hope this helps
arisch86 said:
Seems ever since I updated to the latest OTA update, if I plug my phone in on certain chargers I get a notification stating slow charging enabled please connect to your factory charger. Anyone else having this issue?
It seems to do it on any charger or 12volt car to USB adapter capable of outputting 2 to 2.1 amps
Stock ROM, rooted, unlocked, s-off
Sent from my HTC6435LVW using Tapatalk 2
Click to expand...
Click to collapse
Why are there so many problems about this thing lately even me, I experience this most of the time
When I use the Best Buy 2.1 amp wall charger I still get the message.
I'll need to find my oem wall charger.
So far every one I have gives this message.
I haven't seen this message at all on any of my charges but I haven't charged in the car yet. My battery usually lasts for more than the while day so I just charge at night.
Sent from my HTC6435LVW using xda app-developers app
Well with the faster charging enabled it does charge pretty quick especially using my nexus 7 wall adapter, even with my Nokia Qi pad. But man that last percent takes a while.
As of now I'm using supercharged hatka ROM slim 3.0.3 and getting good battery life. Even in the middle of nowhere where 75% percent of the time when I'm in the plant its searching for signal. I'll leave work after 8 hours and still be at 60%
Guess you can say its the only negative I have for the phone. Trust me the battery life is much better in the plant then my old bionic. I use to have to change the standard battery after 4 or 5 hours as it was completely dead.
Sent from my HTC6435LVW using Tapatalk 2
Last night I received my daughters replacement Rezound from the warranty company. It came with a 1 amp wall charger.
I plugged it into my DNA and did not get the notice of slower charging and it charged quicker than I've ever seen it.
Too bad my 2.1 best buy one won't.
The quick charge capable chargers must output just slightly higher voltage to trigger the rapid charge mode.
I'll experiment some day and see.
This is a known issue. It all comes down to there being no set standard for USB charging. Android, apple, tablets, they all just seem to do their own thing.
The phone is checking the pins on the charger. If the data pins are shorted, then you get fast charging. If not, then it will default to the slower USB charging.
That last update that came through added that 'Slow Charge' warning. I saw it on my gf's DNA. My DNA is rooted and ROM'd so I don't have that. You can still check for the charging speed on a device by going to the Battery page in the settings. Up on top it with either say AC (which is fast) or USB (which is slow).
The supplied HTC wall chargers have the data pins shorted within them, so any regular USB cable will allow you to charge at the AC rate. You may remember some years ago there used to be Charging Only cables and they were regular USB cables that simply had the data pins shorted.
Most car chargers do not have data pins shorted. I have used a number of different ones from monoprice and none of them will charge at the AC rate.
There are videos on youtube showing how to open them up and solder the data pins. You can look for charging cables on amazon (but that seems lame), or you can find a car charger that just actually works.
There is a cheap Motorola charger on Amazon that will give you the fast AC charge.
https://www.amazon.com/dp/B000S5Q9CA/ref=as_li_ss_til?tag=funkertosh-20&camp=0&creative=0&linkCode=as4&creativeASIN=B000S5Q9CA&adid=131FS8N5R70JPV4QGDCV&
Funkertosh said:
This is a known issue. It all comes down to there being no set standard for USB charging. Android, apple, tablets, they all just seem to do their own thing.
The phone is checking the pins on the charger. If the data pins are shorted, then you get fast charging. If not, then it will default to the slower USB charging.
That last update that came through added that 'Slow Charge' warning. I saw it on my gf's DNA. My DNA is rooted and ROM'd so I don't have that. You can still check for the charging speed on a device by going to the Battery page in the settings. Up on top it with either say AC (which is fast) or USB (which is slow).
The supplied HTC wall chargers have the data pins shorted within them, so any regular USB cable will allow you to charge at the AC rate. You may remember some years ago there used to be Charging Only cables and they were regular USB cables that simply had the data pins shorted.
Most car chargers do not have data pins shorted. I have used a number of different ones from monoprice and none of them will charge at the AC rate.
There are videos on youtube showing how to open them up and solder the data pins. You can look for charging cables on amazon (but that seems lame), or you can find a car charger that just actually works.
There is a cheap Motorola charger on Amazon that will give you the fast AC charge.
https://www.amazon.com/dp/B000S5Q9CA/ref=as_li_ss_til?tag=funkertosh-20&camp=0&creative=0&linkCode=as4&creativeASIN=B000S5Q9CA&adid=131FS8N5R70JPV4QGDCV&
Click to expand...
Click to collapse
I have the charger that came with the phone it it fully charges my DNA in 2 hours from 3%
Funkertosh said:
This is a known issue. It all comes down to there being no set standard for USB charging. Android, apple, tablets, they all just seem to do their own thing.
The phone is checking the pins on the charger. If the data pins are shorted, then you get fast charging. If not, then it will default to the slower USB charging.
That last update that came through added that 'Slow Charge' warning. I saw it on my gf's DNA. My DNA is rooted and ROM'd so I don't have that. You can still check for the charging speed on a device by going to the Battery page in the settings. Up on top it with either say AC (which is fast) or USB (which is slow).
The supplied HTC wall chargers have the data pins shorted within them, so any regular USB cable will allow you to charge at the AC rate. You may remember some years ago there used to be Charging Only cables and they were regular USB cables that simply had the data pins shorted.
Most car chargers do not have data pins shorted. I have used a number of different ones from monoprice and none of them will charge at the AC rate.
There are videos on youtube showing how to open them up and solder the data pins. You can look for charging cables on amazon (but that seems lame), or you can find a car charger that just actually works.
There is a cheap Motorola charger on Amazon that will give you the fast AC charge.
https://www.amazon.com/dp/B000S5Q9CA/ref=as_li_ss_til?tag=funkertosh-20&camp=0&creative=0&linkCode=as4&creativeASIN=B000S5Q9CA&adid=131FS8N5R70JPV4QGDCV&
Click to expand...
Click to collapse
I kinda figured it was something with the pins if I wasn't voltage offset.
I did find that one of my car chargers from best buy runs in quick charge. The cable I fixed, rather than using a usb cable in a slot on the charger.
The best number 2.1 amp wall charger uses a data type cable.
Maybe I'll check into shorting the pins on that sucker to get quick charge mode.
Funkertosh said:
This is a known issue. It all comes down to there being no set standard for USB charging. Android, apple, tablets, they all just seem to do their own thing.
The phone is checking the pins on the charger. If the data pins are shorted, then you get fast charging. If not, then it will default to the slower USB charging.
That last update that came through added that 'Slow Charge' warning. I saw it on my gf's DNA. My DNA is rooted and ROM'd so I don't have that. You can still check for the charging speed on a device by going to the Battery page in the settings. Up on top it with either say AC (which is fast) or USB (which is slow).
The supplied HTC wall chargers have the data pins shorted within them, so any regular USB cable will allow you to charge at the AC rate. You may remember some years ago there used to be Charging Only cables and they were regular USB cables that simply had the data pins shorted.
Most car chargers do not have data pins shorted. I have used a number of different ones from monoprice and none of them will charge at the AC rate.
There are videos on youtube showing how to open them up and solder the data pins. You can look for charging cables on amazon (but that seems lame), or you can find a car charger that just actually works.
There is a cheap Motorola charger on Amazon that will give you the fast AC charge.
https://www.amazon.com/dp/B000S5Q9CA/ref=as_li_ss_til?tag=funkertosh-20&camp=0&creative=0&linkCode=as4&creativeASIN=B000S5Q9CA&adid=131FS8N5R70JPV4QGDCV&
Click to expand...
Click to collapse
The phone is doing more than checking pins now. I have a 2.1 Amp dual charger with pins shorted and get the warning. It happily charged in AC mode before the update. The charger can also charge a nexus 10 at 2 Amps. I'm guessing the kernel devs will have to locate the source of the warning. I thought the resistance between the data pins might be the trigger, but there is no difference between the HTC charger and my dual charger. It does seem my car charger is unaffected.
I have found that to trick the phone into AC mode you have to short the the actual cable. Hence strip the insulation off the wires and short the data wires together. Has worked for me on all my chargers.
Sent from my HTC6435LVW using Tapatalk 2
This message does not have to do with the update. I have still not updated my DNA and have been struggling with this for about 6 or 8 months. I am on 2.08. The issue has continually gotten worse since the first time I saw it. At first it would just appear about 1 in 10 times I plugged it in to a car charger. It then got to the point where it would only not show the message with a certain car charger. Now it is showing it on the one car charger that works, but if I mess around with it and unplug and replug it a few times it will finally charge normally. The last few days it has started showing the message on the OEM charger. I have cleaned out the port on the phone and cables quite a few times now, but it doesn't help. I found that doing that only helps if it gets really full of lint and the cable rocks in the port causing it to loose connection if you move it, but it does not change the slow charging message at all. The phone is also definitely not charging at full speed when that message is shown. If I have it plugged in and it shows that message my battery actually drains if the screen is on. With the screen off I only gain about 10% per hour. I am not sure where the issue is, but I think it is different in different circumstances. In my case I think it is the phone itself, but from what I have read about others experiences it seems their problem might be the charger/cord. I hope this gets sorted out soon.
Clay333 said:
This message does not have to do with the update. I have still not updated my DNA and have been struggling with this for about 6 or 8 months. I am on 2.08. The issue has continually gotten worse since the first time I saw it. At first it would just appear about 1 in 10 times I plugged it in to a car charger. It then got to the point where it would only not show the message with a certain car charger. Now it is showing it on the one car charger that works, but if I mess around with it and unplug and replug it a few times it will finally charge normally. The last few days it has started showing the message on the OEM charger. I have cleaned out the port on the phone and cables quite a few times now, but it doesn't help. I found that doing that only helps if it gets really full of lint and the cable rocks in the port causing it to loose connection if you move it, but it does not change the slow charging message at all. The phone is also definitely not charging at full speed when that message is shown. If I have it plugged in and it shows that message my battery actually drains if the screen is on. With the screen off I only gain about 10% per hour. I am not sure where the issue is, but I think it is different in different circumstances. In my case I think it is the phone itself, but from what I have read about others experiences it seems their problem might be the charger/cord. I hope this gets sorted out soon.
Click to expand...
Click to collapse
It could be the charging equipment your phone or it could also be the power source not providing enough power to the device for it to charge fast so it charges slow.
Sent from my HTC6435LVW using XDA Premium 4 mobile app
Just thought I'd let people know of my experiences using a car charger with the USB magnetic charging cable. I have a 2.1 amp dual port USB car charger and also a Sony magnetic charging cable from my CP12 battery cover. I tried using the magnetic charging cable plugged into the car charger this morning and attached the magnetic charging end to my Xperia Z Ultra. The phone was on around 24% and started charging pretty quickly up until around 40% within probably 20mins. This is quite fast for this particular car charger as it seemed to take ages when I used to use it to charge my HTC One X with a normal micro USB cable. Anyway after it hit 40% I noticed it had stopped charging. I had a look at the charger and the power LED was off so I went to pull it out to check and noticed it was very hot! Not sure if it blew a fuse or went into thermal overload shutdown but I definitely think that it isn't really rated at 2.1amp.
Has anyone else had experiences using a car charger to charge their Xperia Z Ultra? I might just try the micro USB cable next time but I liked how quickly it charged with the magnetic charging cable.
I haven't tried it but I think the problem is the magnetic cable that you are using.
ಠ_ಠ
On mobile....
julz said:
Just thought I'd let people know of my experiences using a car charger with the USB magnetic charging cable. I have a 2.1 amp dual port USB car charger and also a Sony magnetic charging cable from my CP12 battery cover. I tried using the magnetic charging cable plugged into the car charger this morning and attached the magnetic charging end to my Xperia Z Ultra. The phone was on around 24% and started charging pretty quickly up until around 40% within probably 20mins. This is quite fast for this particular car charger as it seemed to take ages when I used to use it to charge my HTC One X with a normal micro USB cable. Anyway after it hit 40% I noticed it had stopped charging. I had a look at the charger and the power LED was off so I went to pull it out to check and noticed it was very hot! Not sure if it blew a fuse or went into thermal overload shutdown but I definitely think that it isn't really rated at 2.1amp.
Has anyone else had experiences using a car charger to charge their Xperia Z Ultra? I might just try the micro USB cable next time but I liked how quickly it charged with the magnetic charging cable.
Click to expand...
Click to collapse
I'm actually very impressed that you were able to get the magnetic cable to stay. If I am able to get the cable to stick, I can't even breathe around it.
SPtheALIEN said:
I'm actually very impressed that you were able to get the magnetic cable to stay. If I am able to get the cable to stick, I can't even breathe around it.
Click to expand...
Click to collapse
100% agree
julz said:
Just thought I'd let people know of my experiences using a car charger with the USB magnetic charging cable. I have a 2.1 amp dual port USB car charger and also a Sony magnetic charging cable from my CP12 battery cover. I tried using the magnetic charging cable plugged into the car charger this morning and attached the magnetic charging end to my Xperia Z Ultra. The phone was on around 24% and started charging pretty quickly up until around 40% within probably 20mins. This is quite fast for this particular car charger as it seemed to take ages when I used to use it to charge my HTC One X with a normal micro USB cable. Anyway after it hit 40% I noticed it had stopped charging. I had a look at the charger and the power LED was off so I went to pull it out to check and noticed it was very hot! Not sure if it blew a fuse or went into thermal overload shutdown but I definitely think that it isn't really rated at 2.1amp.
Has anyone else had experiences using a car charger to charge their Xperia Z Ultra? I might just try the micro USB cable next time but I liked how quickly it charged with the magnetic charging cable.
Click to expand...
Click to collapse
Hi Julz,
I hope your device is ok. I was using a similar charger in my car. Had two USB slots. 1amp and 2.1amp.
I'm not sure what cause it, or what happened. But I've had to send my Ultra to the store where I bought it. For some reason my device did that same as you describe. It also wouldn't stop the LED from showing. Meaning that it thought it was charging all the time. (even when not plugged in)
Now amps should be fine. Its the volts that you have to worry about. I posed a thread about batteries that talks about amps volts and how to look after your device... take a look
LINK:
http://forum.xda-developers.com/showthread.php?t=2505165&highlight=battery
check it out...
I have been using my Magnetic charging cable ( I pulled out of my Sony DK30 )
in my car for over a month with the Griffin PowerJolt Micro & have not had a
single issue with the phone or the charger . here are the specs & a pic of the charger .
Technical Specifications
Input: 12 volts DC
Output: 5 volts DC at 2.1 amps
Output power: 10 watts link to charger .
link to charger =
http://store.griffintechnology.com/ipad/powerjolt-micro-ipad
Yeah I think the generic no name chargers probably lack quality circuitry to regulate the charging properly. I'm hoping the Xperia Z Ultra has some decent built in charging protection to prevent issues with minor spikes or fluctuations. Brand name chargers like griffin should be ok.
Similarly, been using the magnetic cable with a griffin car adapter without any problems since I got my unit.
so got tired of not finding a fast charge mod so I mod the cable.
took a realy thin cheap USB cable and cut it in two. on the phone side chortsircut the data cables (white and grean) then connected the vcc+ and ground- normal.
the only reason I cut it in two was to be able to tread a shrink tube on the cable.
now I get fast charge from car and power pack and. and it works perfect.
now stop saying u need a special or expensive cable.
u need a knife and shrink tube and a heat gun (a cigaret lighter works)
and no u can't use this cable for datacynk only charge
maydayind said:
so got tired of not finding a fast charge mod so I mod the cable.
took a realy thin cheap USB cable and cut it in two. on the phone side chortsircut the data cables (white and grean) then connected the vcc+ and ground- normal.
the only reason I cut it in two was to be able to tread a shrink tube on the cable.
now I get fast charge from car and power pack and. and it works perfect.
now stop saying u need a special or expensive cable.
u need a knife and shrink tube and a heat gun (a cigaret lighter works)
and no u can't use this cable for datacynk only charge
Click to expand...
Click to collapse
Cool, thanks man, I'm gonna do that.
Why blow data when you can just get a cheap 4$ cable from newegg with 22 awg power leads. I linked it in confirmed usb cable thread. You destroyed a cable and made it special, hence using a special one instead of standard. The base is pre shorted. You increased AWG technically. Get it? You made a charge only cable, when these are special and can be had cheap anywhere. Buy a nice 4$ standard one with the right power lead awg and you can use it for anything.
...or.. Crazy idea here. Get an Android charger?
Cutting up USB cables is a bad idea, especially shorting them out. The data pins are not supposed to be shorted, generally 200Ohms is expected.
They are suppose to be shorted with fast charge... the base normally does this on plug in on AC switch. A USB3 port also does this... all he did was make a charge only cable. With fast charge 2 though, you won't make it much past 1A this way, just like USB3. Why our stock cable has thick power lead AWG and the phone can reach 1.8A.
Steamer86 said:
They are suppose to be shorted with fast charge... the base normally does this on plug in on AC switch. A USB3 port also does this... all he did was make a charge only cable. With fast charge 2 though, you won't make it much past 1A this way, just like USB3. Why our stock cable has thick power lead AWG and the phone can reach 1.8A.
Click to expand...
Click to collapse
As I said, 200ohm, not shorted... Anyway.
unless the plugg that u connect the USB cable in i sent chortcircut it won't fast charge whatever cable u use. this is for making a charge cable to use with carcharger ore power packs. of u use a wallcharger it's 99% certain it is already chotend and u don't need this. but if u use the original cable (fastcharge) it won't fast charge in a power pack or car charger.
and I charge att same speed with this cable then original charger cable that came with the phone. measured 1.8a with this cable that's all my Powerpack can output. can probably go higher depending on how mutch the phone can use.
it's li-po so should be able to charge 0-100% in 20min but whill shorten battery life and don't think oer phones can handle it
I fast charge with 3 different cables. Again, it's the AWG. Facts don't lie. My power pack and car charger are pre shorted, so all good. If not pre shorted though, you are correct sir.
my wasn't that's why I made this. so no matter what cable used it won't fast charge. Som people also say u have to by a expensive cable with is bull####
if someone can provide a link with a preshortens cable... well then show it. unable to find any
It is legit. I did this with a car USB cable when I had my One X. It would only charge at USB rate (500ma) even though it was a 1A charger. Using navigation the battery would discharge faster than it charged. Tried various cables, and only got it to work by shorting the data pair. After that it charged AC at full 1A.
maydayind said:
my wasn't that's why I made this. so no matter what cable used it won't fast charge. Som people also say u have to by a expensive cable with is bull####
if someone can provide a link with a preshortens cable... well then show it. unable to find any
Click to expand...
Click to collapse
Several available on Amazon:
http://www.amazon.com/s/?ie=UTF8&keywords=usb+charging+only+cable
Not always. My car cigarette adapter is modded to short data pins. It fast charges all my other devices and even my tablets, but doesn't even charge my G2. It says its charging, no slow charging messages, but still depletes battery. Only way toncharge in my car is to use the second USB port that is unmodded, which slow charges. Annoying.
I still think there is a software bug limiting the charging speeds because you can get different speeds by plugging in the same cable mulitple times.
-sent from my LG G2 using XDA Premium 4
We aren't saying you are wrong, you are just doing something different. It's not about expensive, its about thickness for the combo usb cable. Just the awg. What your solution does is increase awg. They are called charge only cables (pre-post short). What people were searching for are COMBO cables. You are using/doing something different. Why titles are called "working USB" cables, not charge only. We already knew this. There is bugs. That was apparent in the voltage testing. Something in the kernel isn't playing right at all times. I have seen this on my car charger. With no change in conditions, I can sometimes charge 200mA's higher with a replug.
player911 said:
Not always. My car cigarette adapter is modded to short data pins. It fast charges all my other devices and even my tablets, but doesn't even charge my G2. It says its charging, no slow charging messages, but still depletes battery. Only way toncharge in my car is to use the second USB port that is unmodded, which slow charges. Annoying.
I still think there is a software bug limiting the charging speeds because you can get different speeds by plugging in the same cable mulitple times.
Click to expand...
Click to collapse
The included home charger for the G2 is rated at 1.8A -- use anything smaller, and you'll see the pop up warning on the phone that charging will be slow and that you should use the "official" charger.
My guess -- if you can find a car charger that actually will put out as much as the phone wants to draw (e.g., 1.8A), and THEN use your shorted data lines, you'll see fast charging of the G2 in your car.
jonstrong said:
The included home charger for the G2 is rated at 1.8A -- use anything smaller, and you'll see the pop up warning on the phone that charging will be slow and that you should use the "official" charger.
My guess -- if you can find a car charger that actually will put out as much as the phone wants to draw (e.g., 1.8A), and THEN use your shorted data lines, you'll see fast charging of the G2 in your car.
Click to expand...
Click to collapse
The 3SIXT micro USB charger I have is rated to 1A not modded, just bog standard. When charging I checked the battery stats and it says AC charging. Now I don't know if it has the data pins pre-shorted, but it managed to boost my battery by 10% in under 20 minutes. The phone was idle, but that's not bad going for a 1A $10 charger.
seems like the moderators did a god job deleting som posts.
just want to say I'm a sorry for my bad manur/attitude/language.
keep the input comming
here is another thread about the topic on another device
* *http://forum.xda-developers.com/showthread.php?t=2292373
maydayind said:
so got tired of not finding a fast charge mod so I mod the cable.
took a realy thin cheap USB cable and cut it in two. on the phone side chortsircut the data cables (white and grean) then connected the vcc+ and ground- normal.
the only reason I cut it in two was to be able to tread a shrink tube on the cable.
now I get fast charge from car and power pack and. and it works perfect.
now stop saying u need a special or expensive cable.
u need a knife and shrink tube and a heat gun (a cigaret lighter works)
and no u can't use this cable for datacynk only charge
Click to expand...
Click to collapse
Cool, thanks man
jonstrong said:
The included home charger for the G2 is rated at 1.8A -- use anything smaller, and you'll see the pop up warning on the phone that charging will be slow and that you should use the "official" charger.
My guess -- if you can find a car charger that actually will put out as much as the phone wants to draw (e.g., 1.8A), and THEN use your shorted data lines, you'll see fast charging of the G2 in your car.
Click to expand...
Click to collapse
not true have tried 3 other chargers 1.2 1.0 and 0.8 all say fastcharge (ac) with my modes cable. as long as it's over 500ma and with a cable with data pins shortend the slow charge warning is removed an the phone thinks it's charging from ac
charging my phone now with a Powerpack with 1a output and it says fastcharge (ac)
if I use the original cable it goes to slowcharging 500ma iv meshurd befor I put on the shrinking tube for isolation
and a car charger can output in theory 5-20a depending on your fuse in the car
the charging current is controlled by kernels in so phone. my old sensation u culd mod with a fastcharge Kernel so it never limited to 500ma always use max.
Samsung even has the ability to do a full charge in 30min but disabled in Kernel.
lg - g2 uses lipo battery's and culd actually be charged in less then 20min but if we do that u have to replace the battery every 6month at the best.
and lipo are extremely sensitive to over charge and the cells have to be charged with precision balans not to explode or swell.