I might have accidentally bricked my SGS 2. I get a screen saying:
"firmware upgrade encountered an issue. Please select recovery mode in kies and try again"
with a mobile phone and a computer logo with a Yellow triangle in between.
I know abt Rooting and ROM flashing etc and has been doing it for the last couple or years.
I flashed Franklin's XXKG3 Kernels, and before I could flash Chainfire's XXKG3 kernel, the USB ports refused to recognize my handset. I can still go into download mode but the Odin or Samsung Kies etc. won't do nothing.
Keeps saying "USB Device not recognized"
Please help!!!!
leo13aug79 said:
I might have accidentally bricked my SGS 2. I get a screen saying:
"firmware upgrade encountered an issue. Please select recovery mode in kies and try again"
with a mobile phone and a computer logo with a Yellow triangle in between.
I know abt Rooting and ROM flashing etc and has been doing it for the last couple or years.
I flashed Franklin's XXKG3 Kernels, and before I could flash Chainfire's XXKG3 kernel, the USB ports refused to recognize my handset. I can still go into download mode but the Odin or Samsung Kies etc. won't do nothing.
Keeps saying "USB Device not recognized"
Please help!!!!
Click to expand...
Click to collapse
Might help to reinstall KIES or try another computer.
Keeps saying "USB Device not recognized"
USB drivers problem remove Kies totally and reinstall .
Connect in mass storage mode and let windows find drivers .
That fails its broken phone .
jje
you broke your phone.
buy another SGS II
You can always try using a USB JIG to put the phone in download mode.
leo13aug79 said:
Keeps saying "USB Device not recognized"
Click to expand...
Click to collapse
Uninstall the Samsung USB Driver from Control Panel
START/Control Panel/Programs and Features
Select "SAMSUNG USB Driver for Mobile Phones" and then uninstall
reboot your PC and then re-install the Samsung USB Driver from:-
C:\Program Files\Samsung\Kies\USB Driver
and run "SAMSUNG_USB_Driver_for_Mobile_Phones.exe"
Doing that will make sure there is no USB driver corruption.
"firmware upgrade encountered an issue. Please select recovery mode in kies and try again"
Click to expand...
Click to collapse
I had the same problem on my SGS4g after updating to a leaked 2.3.4 rom, which would not make phone calls. Tried to use heidmall to downgrade by loading a new rom. After installing the usb driver as described here http://forum.xda-developers.com/showpost.php?p=14798367&postcount=1 . After reboot I get the error screen <phone..!..Computer> "firmware upgrade encountered an issue. Please select recovery mode in kies and try again". I then took the following steps.
I came across this site: http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S_Series#Bricked_Screen Under the bricked section it mentions a couple things to try. I the reboot cycle with a couple of times and kept on getting the same screen. Still no go.
I took Odia's advice an did a complete removal of all usb drivers as mentioned and reinstalled kies. This was key in getting odin to recognize the phone again.
My solution:
I try Odin again to try to get it to recognize my phone. I open odin with the usb connected in this state and it is not recognized. I pull battery, it boots to error screen. I restart odin and then plug in the usb and it is recognized. I was then able to load my pit, pda, phone, csc back onto the phone with odin. The first time it tried to load the data it failed, the second time it worked!
Interestingly I never got the "Download Screen". I was still on the mentioned error screen, yet odin was able to still see the phone. The status bar still showed up on the error screen as the fresh rom was being loaded.
I thought I was totally bricked, but this method worked in my case. Hope something similar might work for you.
I still don't know I would get this error screen and have to go through this after loading the required usb driver for heimdall? Any ideas?
OMG! It's WORKING!
Thanks a lot to you all guys for the co-operation....
So, what did I do???? I uninstalled Kies and re-installed a couple of times but it won't access it. Tried Odin in all possible ways, No success. While playing and after ordering a "Jig" from some1 in USA,
I thought of something else and while the phone still being connected with the pc, I ran SuperOneClick, but it went on saying waiting for the device,.... I accidentally or in frustration hit the "HOME" button and it started doing something, USB drivers and Modem drivers installed on PC. Then I started Odin and the port went "Yellow". And I flashed it with the XXKG3.....
OMG! I'm so much relieved!!!!!!!! thanks God
thank you all too
Love your SGS2 and love God! Bless you all!
fvnktion said:
I had the same problem on my SGS4g after updating to a leaked 2.3.4 rom, which would not make phone calls. Tried to use heidmall to downgrade by loading a new rom. After installing the usb driver as described here http://forum.xda-developers.com/showpost.php?p=14798367&postcount=1 . After reboot I get the error screen <phone..!..Computer> "firmware upgrade encountered an issue. Please select recovery mode in kies and try again". I then took the following steps.
I came across this site: http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S_Series#Bricked_Screen Under the bricked section it mentions a couple things to try. I the reboot cycle with a couple of times and kept on getting the same screen. Still no go.
I took Odia's advice an did a complete removal of all usb drivers as mentioned and reinstalled kies. This was key in getting odin to recognize the phone again.
My solution:
I try Odin again to try to get it to recognize my phone. I open odin with the usb connected in this state and it is not recognized. I pull battery, it boots to error screen. I restart odin and then plug in the usb and it is recognized. I was then able to load my pit, pda, phone, csc back onto the phone with odin. The first time it tried to load the data it failed, the second time it worked!
Interestingly I never got the "Download Screen". I was still on the mentioned error screen, yet odin was able to still see the phone. The status bar still showed up on the error screen as the fresh rom was being loaded.
I thought I was totally bricked, but this method worked in my case. Hope something similar might work for you.
I still don't know I would get this error screen and have to go through this after loading the required usb driver for heimdall? Any ideas?
Click to expand...
Click to collapse
I love you man! You saved my phone and me!
So what have we learnt today? Don't go screaming "brick!" everytime you encounter a problem
I had a same issue yellow triangle between Phone and PC symbol...
followed this step .. http://forum.xda-developers.com/showthread.php?t=1274337
just did like this on very first step to get into odin mode hold vol down and power for longer then usual to get into odin mode and by pass that yellow triangle between Phone and PC screen and then follow rest of it same and easy as right clicking on desktop LOL!
From my experience, only true brick I encountered was when I messed with boot loaders. If the screen shows anything at all, Odin will recognize it. Glad to hear it's fixed
Sent from my GT-I9100 using XDA App
Odia said:
Uninstall the Samsung USB Driver from Control Panel
START/Control Panel/Programs and Features
Select "SAMSUNG USB Driver for Mobile Phones" and then uninstall
reboot your PC and then re-install the Samsung USB Driver from:-
C:\Program Files\Samsung\Kies\USB Driver
and run "SAMSUNG_USB_Driver_for_Mobile_Phones.exe"
Doing that will make sure there is no USB driver corruption.
Click to expand...
Click to collapse
I´d tried to upgrade my Infuse SGH-i997 (AT&T) but I did something wrong and now the cell phone no work.
When it turn on says:
"firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
The computer recognize the cell phone but I don´t know what else I can do.
Any suggestion?
Can you get into download mode? If yes then reflash stock firmware using Odin
Sent from my GT-I9100 using Tapatalk
A bricked phone is a phone which will not respond. It maybe a soft brick or hard.
If you can get into download or recovery all you have to do is reflash. Wipe data & Cache. You will be up and running. If your phone is not recognised by your computer then reinstall kies.
Sent from my GT-I9100
Yep. Infuse Q&A (You're in the wrong section).
anjimgo said:
I´d tried to upgrade my Infuse SGH-i997 (AT&T) but I did something wrong and now the cell phone no work.
When it turn on says:
"firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
The computer recognize the cell phone but I don´t know what else I can do.
Any suggestion?
Click to expand...
Click to collapse
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
Well, I got this same Firmware upgrade error. I can't get the computer to see it at all. It's almost like the USB port doesn't work anymore. I can get into the download mode but then it ends there. I cannot get into the bootloader at all. If I try, it goes to the error screen and if I boot normally, it goes to the error screen.
Brittlespeed said:
Well, I got this same Firmware upgrade error. I can't get the computer to see it at all. It's almost like the USB port doesn't work anymore. I can get into the download mode but then it ends there. I cannot get into the bootloader at all. If I try, it goes to the error screen and if I boot normally, it goes to the error screen.
Click to expand...
Click to collapse
I can't tell if you're asking for help or just letting people know, but anyway, considering all your previous posts were in the Epic 4G Touch forums, you've probably trashed your device flashing something meant for the I9100.
See this thread for confirmation of your new shiny brick, if my above assumption was correct: http://forum.xda-developers.com/showthread.php?t=1492323
this solution worked for a Galaxy s3 mini
fvnktion said:
I had the same problem on my SGS4g after updating to a leaked 2.3.4 rom, which would not make phone calls. Tried to use heidmall to downgrade by loading a new rom. After installing the usb driver as described here http://forum.xda-developers.com/showpost.php?p=14798367&postcount=1 . After reboot I get the error screen <phone..!..Computer> "firmware upgrade encountered an issue. Please select recovery mode in kies and try again". I then took the following steps.
I came across this site: http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S_Series#Bricked_Screen Under the bricked section it mentions a couple things to try. I the reboot cycle with a couple of times and kept on getting the same screen. Still no go.
I took Odia's advice an did a complete removal of all usb drivers as mentioned and reinstalled kies. This was key in getting odin to recognize the phone again.
My solution:
I try Odin again to try to get it to recognize my phone. I open odin with the usb connected in this state and it is not recognized. I pull battery, it boots to error screen. I restart odin and then plug in the usb and it is recognized. I was then able to load my pit, pda, phone, csc back onto the phone with odin. The first time it tried to load the data it failed, the second time it worked!
Interestingly I never got the "Download Screen". I was still on the mentioned error screen, yet odin was able to still see the phone. The status bar still showed up on the error screen as the fresh rom was being loaded.
I thought I was totally bricked, but this method worked in my case. Hope something similar might work for you.
I still don't know I would get this error screen and have to go through this after loading the required usb driver for heimdall? Any ideas?
Click to expand...
Click to collapse
Thanks a lot. My teenage son thought he had bricked his S3 mini but I was able to fix it after reading this thread. Thanks.
Hi Guys,
My cousin's phone(GT-I9100) was soft-bricked at first. He was on Stock ICS and this **it happened with an OTA update via wifi. He purchased the phone in Germany and warranty period was over.
It has the following issues:
Enters Download mode but does NOT enter recovery mode (confirmed NAND rw corruption)
Doesn't flash
Bad flash in odin (FAIL after flashing, or the flashing suddenly stops)
I have tried all the methods including the bootloader flashing. But all the time flashing via odin stops and when I have flashed the mentioned Kernel(Kernel_I9100XXLPH) it wasn't success. Hope was lost .
Now somehow still the download mode works but when I start the phone , its showing that "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
When connected through Kies, the phone is not recognized. Please help me on how to recover my phone.
I have followed the guide mentioned here
BTW tried to flash through heimdall also on a linux system. Below error occured
Initialising connection...
Detecting device...
ERROR: Failed to access device. libusb error: -3
Tried to re-partition using the pit file from here. But it stucked at
"Setting up PIT"
Was it completely bricked? Is there any other way to restore?
Do I need to change the motherboard or something to get the phone running?
chaitanya87 said:
Hi Guys,
My cousin's phone(GT-I9100) was soft-bricked at first. He was on Stock ICS and this **it happened with an OTA update via wifi. He purchased the phone in Germany and warranty period was over.
It has the following issues:
Enters Download mode but does NOT enter recovery mode (confirmed NAND rw corruption)
Doesn't flash
Bad flash in odin (FAIL after flashing, or the flashing suddenly stops)
I have tried all the methods including the bootloader flashing. But all the time flashing via odin stops and when I have flashed the mentioned Kernel(Kernel_I9100XXLPH) it wasn't success. Hope was lost .
Now somehow still the download mode works but when I start the phone , its showing that "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
When connected through Kies, the phone is not recognized. Please help me on how to recover my phone.
I have followed the guide mentioned here
BTW tried to flash through heimdall also on a linux system. Below error occured
Initialising connection...
Detecting device...
ERROR: Failed to access device. libusb error: -3
Tried to re-partition using the pit file from here. But it stucked at
"Setting up PIT"
Was it completely bricked? Is there any other way to restore?
Do I need to change the motherboard or something to get the phone running?
Click to expand...
Click to collapse
Hi there,
I read your post and I have the *EXACT* same same problem, everything you described is what my phone is doing. I have a SGS2 GT-i9100M.
Were you ever able to find a solution to the problem?
Don't know how much this'll help but there was a thread a few days ago where someone faced the same issue. Flashing via Odin fails and the firmware error. Turns out he hadnt plugged he phone into a USB port connected directly to the computer. ie. Not via a hub or a USB port on the keyboard etc. Odin has problems with that. Also disabling KIES while on Odin. And finally the firmware should be one of your device variant itself.
Hope it helps.
Sent from my GT-I9100 using xda app-developers app
did you manage to get anywhere with this? i had a similar type of issue, took a usb jig to get the system working again
Good night
Well, this morning I tried to make a backup of my rom using the rom manager. It failed and I got stuck in the CWM. I've already tried flashing other roms (transwin and bionic monkey) and wipe cache, data, etc. Right now, I'm trying to flash CWM using odin, but it can't recognize my device. I've already trying unnistalling/reinstalling KIES and Samsung drivers, but it always shows that error code: 10 (even in another computer).
So... anyone have any ideas? I think I should try to make odin recognize my device, but I don't know what to do anymore...
delete kies from system and try to connect device in Download mode wait for Odin to install drivers and recognized by it or try different port or cable
windowsvistas said:
delete kies from system and try to connect device in Download mode wait for Odin to install drivers and recognized by it or try different port or cable
Click to expand...
Click to collapse
Thanks for your attention. I did it all again, but I think the problem was that I was using the recovery to enter in download mode. When I tried to enter without it I managed to get out of recovery, but now I can't make KIES recognize my device to get back to stock and the Bionic Monkey rom is bugged ("Android.process.acore has stopped" every 3 seconds). I saw the topic with some stocks, but I can't find one for my country (Brazil) and IDK if I can just flash any rom... I'm going to try the TransK rom, I wanted to test it anyway.
Thanks again ^^
Suddenly my phone went into bootloop and couldn't access recovery. So I tried to flash firmware with odin, toward the end of the flash odin failed as the USB cable was unfortunately disrupted. Now the only thing I can get out of the phone is download mode, and a screen that says firmware ugrade encountered an issue, Please select recovery mode in Kies & try again. Now the problem with this is now odin nor Kies will recognize my phone like there are no drivers. My pc says unrecognized device connected.
Please help me to unbrick my S2 GT-19100. I REALLY NEED THIS BACK TO LIFE.
Hi,
If you haven't done so already, please follow this guide: http://forum.xda-developers.com/galaxy-s2/general/guide-t2345831
If your phone is still not detected after following the guide, it is likely that your phone is bricked.
gsstudios
I have tried 5 times different odin versions and CF-Auto Root and it fails. Last time my phone starts up with a message that i need to do emergency recovery with kies. But kies never detected my phone. I got samsung drivers and Odin connect with the phone just fine. But not kies i have tried troubleshooting in kies manys times and it fails. Used both kies and kies lite.
Are there any other ways to root my phone without the CF tool?
And do I have to be rooted to install twrp?
The phone is bricked now I have it on download mode. Tried downloading stock firmware from sammobile but they are always corrupted when using 7zip or winrar.
Many questions in one post hope you can help me out.
"Edit" Debug mode is on and OEM. But I dont know if that matter now when its bricked.