[ROM][STOCK][ROOTED][BUMP][v20f]Feb 08 Lollipop 5.0 [F400 S/L/K] - G3 Android Development

Installation:
1. Copy to Internal Mem
2. Reboot to TWRP
Code:
1. Power off.
2. Press [B]power + volume down[/B] keys.
3. Wait for LG logo and then release the buttons.
4. Immediately press [B]volume down + volume up[/B] buttons.
5. Release the keys once the hard reset menu is being displayed on your LG G3.
3. Full Wipe\ Cache\ Dalvik
4. Install f400_LSK_v20f.zip
5. Reboot
Enjoy..
LINK:
f400_LSK_v20f.zip
For Rooting:
http://download.chainfire.eu/supersu
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Big credits for:
@KingOfDope
@Chainfire - SU binaries
@Skin1980 - rooting
@thecubed - BUMP

WTF??? why 19c? it was posted week ago.....

Kniazkoff said:
WTF??? why 19c? it was posted week ago.....
Click to expand...
Click to collapse
no one did a flashable zip from kdz.. So i decided to make. You should've made one..

Link updated..

Yea and this is for f400 nhot for international.Good luck

work d855??

Question...
It is the same from KDZ File?
Nothing changed?

Can anybody post another link to download the rom?

dead link . Newbie question: I have twrp and bumped CloudyG3, can I flash this one directly? or need a "bumped" version?. Thank you for this ROM!

No credits given to @timmytim? Yea I believe there is a good reason why this is for 400s only.
Sent from my LG-D802

Uploading to mega

it root ready?
Thanks

natz said:
it root ready?
Thanks
Click to expand...
Click to collapse
i manage to root it, uploading ZIP on mega

New link now ready..

ferluci said:
dead link . Newbie question: I have twrp and bumped CloudyG3, can I flash this one directly? or need a "bumped" version?. Thank you for this ROM!
Click to expand...
Click to collapse
Yeap direct flash has no problem

the file
the uploaded file, has no extension, should i rename it to zip ?
---------- Post added at 10:13 AM ---------- Previous post was at 09:41 AM ----------
flashed it, but i cannot choose network mode, and my device is loosing network every 2-3 minutes

Where is 20a?

rmlsalta said:
Yeap direct flash has no problem
Click to expand...
Click to collapse
Thanks for the response. I did flash the rom but I´m experiencing some problems. Downloaded the rom from Mega, flashed, choosed to root, then rebooting normal, but once the system fully started, the phone signal indicator shows full signal and then, seconds later, no signal (indicating "no service"), some seconds (may be a minute) later the same, (full signal), and go on...between signal and no signal. It never happened to me with stock, CloudyG3 1.1 or 1.2. Besides, the rom indicates that is nor yet rooted (but I did when flashed this rom). And I can´t get to TWPR with power+vol down in order to use my backup.......

SupremE MaDDoX said:
the uploaded file, has no extension, should i rename it to zip ?
---------- Post added at 10:13 AM ---------- Previous post was at 09:41 AM ----------
flashed it, but i cannot choose network mode, and my device is loosing network every 2-3 minutes
Click to expand...
Click to collapse
It has .zip extension, just put .zip if there is nothing.

ferluci said:
Thanks for the response. I did flash the rom but I´m experiencing some problems. Downloaded the rom from Mega, flashed, choosed to root, then rebooting normal, but once the system fully started, the phone signal indicator shows full signal and then, seconds later, no signal (indicating "no service"), some seconds (may be a minute) later the same, (full signal), and go on...between signal and no signal. It never happened to me with stock, CloudyG3 1.1 or 1.2. Besides, the rom indicates that is nor yet rooted (but I did when flashed this rom). And I can´t get to TWPR with power+vol down in order to use my backup.......
Click to expand...
Click to collapse
Hi thanks for the feedback, will look at it
If you want to go to recovery
Just install quick boot or
adb reboot recovery on adb command

Related

[Rom] VDT-V1 Super Lite LG G3 Cat 6 F460L/S/K

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
******************************************************************************************************************************************************​
* Benefits
- Created from the F460S V10F background.
- Fix all errors welder.
- Remove the keyboard korean heard calling and texting.
- Add the app as walkman sony, watch movies, view photos, sketches of Z2.
- Add the beautiful and lively theme.
- Fix error message, heard the call of the three operators L, S, K.
- Update the latest app for the period 27.08.2014.
- Add tweak build.prop Tweaks and help smooth machine.
- Mod multitasking split the full screen app.
- And a few features that invite you to explore further.
* How to Up :
- Request you to be root.
- You download the rom file to unzip the subdirectories inside the rom.
- Inside 1 BusyBoxPro.apk software requires you to install it and then open it up waiting for it to load to 100% then you click "Install" until it shows up 1 white board and then turn it off and next steps following.
- Copy materials folder "system" in memory of the machine.
- Then you run the file "VDT-V1 Super Lite LG G3 Cat 6" when the screen starts to run it asks for permission to connect to your computer, then you agree. Then the Super SU it asks you hit allowed.
- Wait for running range 10-15 minutes depending on the configuration of your computer.
- Run finished it says "Press Enter to Vao Recovery" then you follow
- In the recovery then you "Select wipe data / factory reset" and "wipe cache Chon paritition" to clean the machine offline.
- Reboot and resumed full turn shall inform the developer as options -> USB debugging mode and then we resumed unzipped folder and run right past the patch file corresponding to each your machine.
- Run finished reboot and use only. Wishing you happy with VDT-ROM.
MODERATOR EDIT: The links have been removed due to XDA Rules violations
You are amazing, when will vdt v9 for g3 801 dude?
Sent from my LG-F400S using XDA Premium 4 mobile app
It's rom from F460 for F400 ?? or Only for F460 ?
Can you post a mirror? Too many people downloaded from the google drive, cant download anymore.
Thanks
To the op, I can provide 2 very fast and reliable mirrors if you like. Just provide me a file and I'll get it taken care of for ya
When for d855?
I download the ROM and successfully installed on my F460S. When running the "VDT-V1 Super Lite LG G3 Cat 6" bat file, it took about 7 minutes before I can go to the phone recovery mode. When I select "Select wipe data / factory reset" on the phone, it took a long time before the process completed (maybe 5 or 6 minutes). I was a little worry when this process took so long, but it finally completed. I follow the rest of the instruction without any problem. I setup the phone again (from Titanium Pro backup) and have not encounter any problem yet. Thanks VanDieuTot for the first F460S ROM and looking forward to your continue supporting this phone.
---------- Post added at 11:50 AM ---------- Previous post was at 11:45 AM ----------
One more thing. I installed XPOSED, Tweaksbox 1.2 and Cobalt G3 theme and did not have any problem yet.
---------- Post added at 12:02 PM ---------- Previous post was at 11:50 AM ----------
VanDieuTot,
Question, Do you have the image file to flash the F460S back to stock in case we get into bootloop or want to go back to stock? I can not find any information about this when google. Thanks.
Sent from my LG-F460S
---------- Post added at 12:11 PM ---------- Previous post was at 12:02 PM ----------
Sent from my LG-F460S
Nice, some love for the cat.6
Thank you dev!
What is a viable option for rooting F460K?
Does this ROM persist through reboots and if the F460 can load a custom ROM then I'm guessing it's not that hard to load it on the other G3 versions (despite locked bootloaders)?
Also, is there anything significantly different about the F460, aside from the CAT 6 4G, compared to the other G3s?
Eagledig said:
It's rom from F460 for F400 ?? or Only for F460 ?
Click to expand...
Click to collapse
any answer to this question?
What you desire in VDT-V2.
vandieutot said:
What you desire in VDT-V2.
Click to expand...
Click to collapse
This thread is closed for XDA Rules violations concerning warez.
@vandieutot Please read your PM's

[RECOVERY][UNOFFICIAL][4.4 Based] CWM RECOVERY for G7105 [ms01lte]

Clockworkmod recovery for your Samsung Galaxy Grand 2 (SM-G7105)
Download:
Cwm: www.mediafire.com/download/aqt1yw6q3mlc73b/recovery.tar.md5
Odin http://shabbypenguin.com/?developer=Tools
1) Install whatever drivers make you happy and make your device connect (i would suggest samsung ones).
2) Reboot your device in download mode you can use adb reboot download or the hardware key combo for your device.
3) Load up Odin and uncheck auto-reboot.
4) Click PDA and select the CWM tar you downloaded.
5) Connect your device in download mode.
6) Click start.
7) When its finished disconnect your device, pull the battery out.
8) Reinsert the battery and use the hardware keys for your device to power directly into recovery mode (this will bypass install-recovery.sh if you are stock).
9) Enjoy having a custom recovery.
To root simply grab this zip file http://download.chainfire.eu/supersu copy it to your device and flash it in recovery. Reboto and load up supersu, have it disable knox then reboot into recovery and reflash supersu and youll be rooted.
Thanks to @max3500 for testing
XDA:DevDB Information
CWM Recovery G7105, Tool/Utility for the Samsung Galaxy Grand 2
Contributors
aapav01
Version Information
Status: Beta
Created 2014-12-15
Last Updated 2014-12-15
Reserved
ScreenShot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
works like a charm! thank you very much
qasim799 said:
works like a charm! thank you very much
Click to expand...
Click to collapse
How much time it took u to boot into recovery
How can I root the device?
blasf1 said:
How can I root the device?
Click to expand...
Click to collapse
http://download.chainfire.eu/supersu copy it to your device and flash it in recovery
work in JB?
HATREDX said:
work in JB?
Click to expand...
Click to collapse
No I don't think so
aapav01 said:
How much time it took u to boot into recovery
Click to expand...
Click to collapse
10 seconds and also says set warranty bit recovery recovery is not selinux
qasim799 said:
10 seconds and also says set warranty bit recovery recovery is not selinux
Click to expand...
Click to collapse
Can u send the screenshot of it
work in lte version?
Good evening, I have the SM-G7105, with the ROM cooked by maxx, if I do the steps in this tutorial, will it work? or I'll break your phone! ??
I have used it with Maxxx rom and it works perfect! don't worry about that
blasf1 said:
I have used it with Maxxx rom and it works perfect! don't worry about that
Click to expand...
Click to collapse
ok ok, I hope to know do
---------- Post added at 10:31 PM ---------- Previous post was at 10:22 PM ----------
sorry the link to the recovery? where is it?
---------- Post added at 10:47 PM ---------- Previous post was at 10:31 PM ----------
I am not very clear what I have to do for root, please help
It's working very nice, I rooted my phone, a great thanks for you aapav01. with this custom recovery we can build new roms, new mods, a great thanks and congratulation for all galaxy grand 2 g7105 users
after do that it's possible to return on rom official 4.3 ? i'm on official 4.4.2 G7105, please, thx.
recovery is not seandroid enforcing
set warranty bit: recovery
is it normally?
Works , on T-mobile PL brand version !
Work on SM-G7105L version? Thanks
In the latest Odin, there's no PDA. The sections present are BL, AP, CP, CSC. Which one should I use?

[ROM][DEAD-LINKS][ARCHIVE-THREAD] GTSE AOSP Combo

Instructions: This supports all variants of the Galaxy A5 2015
No need to download gapps it's preinstalled with supersu
Additional Instructions:
Download and flash a stock Samsung ROM of your country before starting then root it:?
The above step is necessary because the ROM might have issues. It has to be a lollipop ROM. After it is rooted go to the folder firmware and firmware modem and copy both of the folders. Also copy the libsec-ril.so and libsec-ril-dsds file from lib. After you completed the instructions below go to the file manager in recovery and copy the lib files to the folder /system/lib. After that reboot. Once the ROM is done booting using a root explorer copy the files inside the folders firmware/image and firmware modem/image which you copied earlier to the device storage to the folder /system/etc/firmware. Then reboot and WiFi and Sim should be working.
Disclaimer: I will not be responsible for any damages that the ROM might cause
1. Make a backup of your current ROM using TWRP Recovery ( Do not SKIP. YOU WILL NEED THE FOLDER DIRECTORY)
2. Download the ROM from the link.
3. Extract the folder containing the ROM.
4. Now move the folder to /TWRP/Backups/234CEC2A/
5. Boot into recovery and click restore.
6. There you will see the ROM name Google Touchwiz ROM Final.
Then restore it.
7. Now go and factory reset and clear dalvik cache.!
8.Your Done!
Its finally done. Ever since we killed the WiFi bug I was working and working and working and finally its over. Very Special thanks goes out to mygalaxya for porting Resurrection Remix and that's it.
We have accomplished it. This ROM is everything you guys asked for.
Theme Support
Lots and lots of features
All unnecessary apps or features removed. Its bare bones
Its done RRGTSE has been born.
I've gone through everything on the phone and there are no bugs except for it being able to detect a sim card. Don't worry your sims work its just that it won't appear in settings properly and setup properly ?
So that's it report any bug in this thread and I'm going to try and resolve it as soon as possible.
Good luck and enjoy
By the way I'm starting a YouTube channel later will mention name and etc later. Pics will be up in a few. See ya.
ENJOY THE ROM
Remember follow all the steps. They are very crucial. Even the backup.
Also no spam please [emoji3]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sorry no gallery because personal [emoji3]
Note set these setting in kernel editor for Amoles display Saturation: 60 and screen contrast : 140 and screen value 130
sounds cool bro,i test it today and send a report as soon as i can,thanx for your work.
Is it only for A5? Please mention the phone it supports in the title for users to know easy
will this work on 6.0.1 bootloader?
---------- Post added at 08:45 AM ---------- Previous post was at 07:57 AM ----------
I am going to try it on my A500H, and post the results
It works with the new boot loader 6.0.1. I'm using it right on 6.0.1 bootloader
I can confrim that wifi and sim cards are not working. And Rom is very fast in use.
Where is Skulldron from?
It works in SM-A500M
Dang it made a mistake Check instruction in how to install again sorry for mistake. BTW it supports all variants as said.
Skulldron said:
Dang it made a mistake Check instruction in how to install again sorry for mistake. BTW it supports all variants as said.
Click to expand...
Click to collapse
ok i am gonna try your new tutorial, and post my results.
Anyone available to test out new apps
Sent from my SM-A500H using XDA-Developers mobile app
Downloading now. Will install and give feedback soon. Thanks. Just as you promised.
Ok I installed but rom keeps rebooting and restarting. Though no need to worry because I am already using this rom.
Hey I'm about to upload a link to a vid which shows how to install the rom. Check instructions later.
Happy but not satisfied
I installed this rom on my galaxy a500g dous and its woorking but noo wifi and sim services are working please help me at [email protected]
Downloading...waiting for video review...thanks man..cheers..
Any feedback? Does anybody got the correct installation and work properly?
Done installing to my a500f without wifi problem and network problem.. Very nice rom.
My only problem is video call crashes on fb messenger..
Any solutions? Tia.

Leagoo M8 TWRP Root and Overlay Fix

Some files for Leagoo M8 owners:
SuperSU v2.79
http://ul.to/nzjkfpds
Recovery (TWRP & Scatter File)
http://ul.to/sf9ig4yl
MTK Drivers
http://ul.to/crs6xzlz
SP Flash Tool v5.1540.00
http://ul.to/4wv9y3wj
Screen Overlay Fix (to flash)
http://ul.to/vx2lszbz
Xposed (to flash)
http://dl-xda.xposed.info/framework/sdk23/arm/xposed-v87-sdk23-arm.zip
Xposed (App)
https://forum.xda-developers.com/attachment.php?attachmentid=3921508&d=1477916609
Use SP Flash Tool to flash the Recovery (TWRP) and use then TWRP on your phone to flash SuperSu, Xposed and Screen Overlay Fix
Unable to download files
Can you please upload those files here or Dropbox as I am unable to download from that site. Thank you.
donshady28 said:
Can you please upload those files here or Dropbox as I am unable to download from that site. Thank you.
Click to expand...
Click to collapse
Sorry, too large for XDA. Use Uploaded free user Download. Should work for everyone
Scatter file Missing
After downloading the Recovery Twrp I can't find scatter file. Kindly upload the scatter file. Thank you.
donshady28 said:
After downloading the Recovery Twrp I can't find scatter file. Kindly upload the scatter file. Thank you.
Click to expand...
Click to collapse
Scatter file is inside the TWRP.rar file.
MT6580_Android_scatter.txt
Can anyone confirm that TWRP is fully working? sd card, backups, etc all working?
stephendt0 said:
Can anyone confirm that TWRP is fully working? sd card, backups, etc all working?
Click to expand...
Click to collapse
Yes, it works.
I used it to flash SuperSu and Xposed. :good:
Thanks for confirming it works!!!
SomeOneX said:
Yes, it works.
I used it to flash SuperSu and Xposed. :good:
Click to expand...
Click to collapse
Excellent. Are you able to restore backups? This is something important for me
I'm unable to download the scatter file.
SomeOneX said:
Scatter file is inside the TWRP.rar file.
MT6580_Android_scatter.txt
Click to expand...
Click to collapse
I'm unable to download the scatter file. Can anyone send the scatter file to my mail.
[email protected] Thank you.
donshady28 said:
I'm unable to download the scatter file. Can anyone send the scatter file to my mail.
[email protected] Thank you.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
stephendt0 said:
Excellent. Are you able to restore backups? This is something important for me
Click to expand...
Click to collapse
I used only TitaniumBackup.
SomeOneX said:
I used only TitaniumBackup.
Click to expand...
Click to collapse
OK, I'd like to try Xposed and a few other mods but I'd hate to not be able to restore to stock ROM if backup and restore doesn't work properly (which I've seen a couple of times on MTK devices)
Update! TWRP works well, even backup and restore seems OK. Now to make a debloated ROM :good:
PS: Can someone explain the Overlay fix? I'm not sure exactly what this is supposed to resolve. I am using the 20161213 ROM.
After flashing the TWRP, tried to reboot to recovery but not working. How do I boot into recovery.????
I tried it in 20161213rom and 20170116 ROM!
donshady28 said:
After flashing the TWRP, tried to reboot to recovery but not working. How do I boot into recovery.????
I tried it in 20161213rom and 20170116 ROM!
Click to expand...
Click to collapse
What do you get when you turn your phone off and hold VOL UP + Power? Once I select "recovery" then it shows the Leagoo logo for a moment then boots right in.
When I turn the phone off, I hold the vol + and power and I get recovery, fastboot and reboot. I select the recovery using the vol down. But its keeps showing Leagoo logo
Okay. For whatever reason, it hasn't flashed the recovery properly - it sounds like it's missing. If you have the stock recovery, it shows the Leagoo logo for a moment, then shows the Freeme logo only (no text, just a logo). With TWRP it takes around 2-3 seconds for it to come up. It sounds to me that something went wrong when you tried to flash TWRP. What version of SPFlashTools are you using? Are you sure the right drivers are installed? Perhaps try another computer and USB cable and try with SPFlashTool again.
---------- Post added at 01:35 PM ---------- Previous post was at 12:55 PM ----------
Good news! I uploaded a debloated ROM. Link here: https://forum.xda-developers.com/android/development/6-0-lazy-s-debloated-rom-leagoo-m8-t3574816
It worked for my Leagoo M8 on second reflash with Pack-Flashtool-v5.1640.00.000.
After first attempt with original flashtool I had Freeme's hieroglyph and "no command" text.
Thank you!
Anyone knows if this can work for "Pro" version?

[UB][RECOVERY] TWRP v3.7.0 for Xperia X

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OFFICIAL DOWNLOADS FOR SUZU:
https://twrp.me/sony/sonyxperiax.html​twrp-3.x.x_x-x-suzu.img: Official TWRP image​
DEVELOPMENT DOWNLOADS FOR SUZU:
Folder: https://sourceforge.net/projects/loire-development/files/twrp-recovery/suzu/​twrp-3.x.x_x-x-YYYYMMDD-suzu.zip: Flashable unofficial TWRP to FOTAKernel​twrp-3.x.x_x-x-YYYYMMDD-suzu.img: Unofficial TWRP image​
INSTALLATION
MANUALLY TO FOTA​Fastboot: Adapt the image name and install this way:​fastboot flash recovery twrp-3.x.x_x-x-suzu.img​fastboot reboot​​FROM EXISTING RECOVERY​
Enter to the current recovery
Install flashable TWRP
Reboot/Power off
HOW TO ENTER TO THE RECOVERY:
Power off your phone
Press Power and Vol- buttons at the same time until vibration
Wait for TWRP load
Sources:
TWRP device tree: https://github.com/TeamWin/android_device_sony_suzu/tree/android-9.0​Kernel: https://github.com/Chippa-a/kernel-copyleft/tree/34.4.A.2.xxx​Thanks to the TWRP Team!​
Backup-Restore function working fine so far, only issue I am seeing is phone is heating up pretty faster than before while backing up in compression mode.
Another minor thing is that earlier when entering recovery mode a purple light used to blink, now its missing.
Just saw this now and I'm really grateful. Big ups to you, man. Great work.
And I was afraid there would be no 3.2.1 for this device; 
 @Chippa_a makes it possible - intensified thanks! :highfive::good::good:
Thank you!!
I can't flash the zip because twrp does not give access to that part of the storage, weird.
fusk said:
I can't flash the zip because twrp does not give access to that part of the storage, weird.
Click to expand...
Click to collapse
Weird. Try using flash tool to fastboot the image if the flashable zip doesn't work for you.
Updated from TWRP, backup/restore works, no problems so far apart from it needs more than a minute till TWRP GUI appears after boot. Thanks for update.
Do you use the stock kernel? I installed the recovery built by oshmoun in the omnirom thread. It uses the aosp kernel. It starts faster, has a better sdcard naming and can flash oem images. Maybe you could try this kernel.
I use stock kernel (Pexorom 4.5) so this may be the reason for the delay.
I mean the kernel used with the recovery, not the rom kernel.
I_am_Blackford said:
Weird. Try using flash tool to fastboot the image if the flashable zip doesn't work for you.
Click to expand...
Click to collapse
This is what i did. Download img, place file on phone. Download twrp app, pick choose a file, browse to recovery.img, flash. Power off, boot to recovery = win.
Reboot to system, retry installing new update = great success.
mase76 said:
I mean the kernel used with the recovery, not the rom kernel.
Click to expand...
Click to collapse
Sorry, I didn't get it... kernels everywhere.
However, flashing with fastboot leads to the same delayed start. Strange.
privatim said:
Sorry, I didn't get it... kernels everywhere.
However, flashing with fastboot leads to the same delayed start. Strange.
Click to expand...
Click to collapse
I dont know if there is a connection, but i've tested the recovery with OmniROM 7.1.2, where display is not responding. It can be installed, shows 3.2.1, but display remains dead 4 touch.
Give this one a try:
https://forum.xda-developers.com/showpost.php?p=76440401&postcount=333
mase76 said:
Give this one a try:
https://forum.xda-developers.com/showpost.php?p=76440401&postcount=333
Click to expand...
Click to collapse
Same result, whether fastboot or flashtool, display is dead.
Certainly missed ODM LOIRE v12, v11 is installed.
Not really sure is the latest bootloader.
Does restoring a backup change the bootloader as well?
Edit: Solved: the answer is 'yes'.
3.2.1 does not work @7.1.2 restore because of outdated bootloader.
privatim said:
I use stock kernel (Pexorom 4.5) so this may be the reason for the delay.
Click to expand...
Click to collapse
Moved to XGEN ROM and now TWRP starts without delay. :good:
privatim said:
Moved to XGEN ROM and now TWRP starts without delay. :good:
Click to expand...
Click to collapse
What I do not understand, maybe bootloader or encryption, but why is 3.2.1 not backwards compatible on Suzu?
Is Omni 7.1.2 kernel (more I have not tried) or not current boot loader the reason?
Installed on last nougat internal storage 0 help
Inviato dal mio F5121 utilizzando Tapatalk
I'm glad that you finally managed to crack this damn decryption. I felt really bad with my broken promise of delivering the working build. I'm sorry, guys. @Chippa_a congratulations on your hard work

Categories

Resources