CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Kernel Source: https://github.com/CyanogenMod/android_kernel_lge_g3
Click to expand...
Click to collapse
Yup. It's finally here. CM11 with basically everything* working.
*Working:
Pretty much everything:
2G/3G/LTE
Camera (back and front-facing and LED flash, no 4K recording as it's not in CM yet)
Sound
Screen (duh)
Proximity, Accelerometer, Gyroscope
SDCard read/write
*Not working:
Wireless Charging (it works but it's very, very slow)
Bluetooth - (All of it, ideas exist, @invisiblek is awesome)
NFC
"GPS is a little derpy" - @invisiblek 2014 (you'll get a lock, but it'll probably take you a little bit)
Installation Instructions:
*NOTE*: You must be Bump'd for this to work. This requires flashing via custom recovery.
1. Download this and GApps (recommended PA GApps here)
2. Put both on Internal Storage
3. Reboot into recovery
4. BACKUP CURRENT ROM
5. Factory Reset/Wipe
6. Flash CM11 (no need to wipe System)
7. Flash GApps
8. Reboot
9. ???
10. Profit
Downloads
First Build
Dev-Host
Basketbuild: https://s.basketbuild.com/devs/jholtom/ls990/cm11/
Androidfilehost: https://www.androidfilehost.com/?w=files&flid=21281
Repositories are at github.com/jholtom
Kernel source is at github.com/CyanogenMod/android_kernel_lge_g3
@invisiblek was pretty awesome in getting this going, much more credit goes to him than me, he really had the base for this, and now I just fix crap for the ls990.
@Berzerker7, shoutout because I stole your thread body.
XDA:DevDB Information
[ROM][CM11][UNOFFICIAL] CyanogenMod 11, ROM for the Sprint LG G3
Contributors
jholtom, invisiblek, Clark44
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Beta
Created 2014-11-15
Last Updated 2014-11-22
Sweet
Thanks a lot guys, you are awesome.
Alright been waiting to try this out. Thank you
I will test but have to have the BT working so I will nandroid back. Thx for the hard work.
Edit
I know others have been having a hard time with sprint and AOSP, care to share what was going on?
Getting 404 at DL page
Stump'd & Bump'd
Now I'm Barren all
I'm getting 404 on the download link
Sent from my LGLS990 using XDA Free mobile app
deleted..
So far everything has been extremely fluent and stable for me, you guys did a great job!
mhsbrian said:
So far everything has been extremely fluent and stable for me, you guys did a great job!
Click to expand...
Click to collapse
Will you share a link
Sent from my LGLS990 using XDA Free mobile app
jmkarnai01 said:
Will you share a link
Sent from my LGLS990 using XDA Free mobile app
Click to expand...
Click to collapse
Wait till they fix their own links, I don't consider it good xda ethic to link other people's work especially in the case of bumped images.
Looking forward to flashing this. I've actually been messing with CM11 in my spare time, but the official CM repos don't boot when compiled. I had just switched to invisiblek's repos and started building again about 20 minutes before I saw this thread. Gives me hope that I'll finally get a build that works, lol.
OP updated, with link. Its working for me, repos used to compile are also there.
jholtom said:
OP updated, with link. Its working for me, repos used to compile are also there.
Click to expand...
Click to collapse
Thanks a lot, it's honestly working beautifully so far to be so fresh. You guys did some good work bringing it to sprint folks!
Great Develoment keep the good work.
Thank you
Awesome sauce going to do this right now
Sent from my LGLS990 using Tapatalk
---------- Post added at 11:37 AM ---------- Previous post was at 11:32 AM ----------
jholtom said:
Yup. It's finally here. CM11 with basically everything* working.
*Working:
Pretty much everything:
2G/3G/LTE (Roaming bug - fix is in the pipeline)
Camera (back and front-facing and LED flash, no 4K recording as it's not in CM yet)
Sound
Screen (duh)
Proximity, Accelerometer, Gyroscope
SDCard read/write
*Not working:
Wireless Charging (it works but it's very, very slow)
Bluetooth - (All of it, ideas exist, @invisiblek is awesome)
NFC
"GPS is a little derpy" - @invisiblek 2014 (you'll get a lock, but it'll probably take you a little bit)
Installation Instructions:
*NOTE*: You must be Bump'd for this to work. This requires flashing via custom recovery.
1. Download this and GApps (recommended PA GApps here)
2. Put both on Internal Storage
3. Reboot into recovery
4. BACKUP CURRENT ROM
5. Factory Reset/Wipe
6. Flash CM11 (no need to wipe System)
7. Flash GApps
8. Reboot
9. ???
10. Profit
Download: here (new builds will also show up in there)
Dropbox
http://d-h.st/p6O -> Mirrors are coming
https://www.dropbox.com/s/f2b43j6pvsl998y/cm-11-20141115-UNOFFICIAL-ls990.zip?dl=0
Repositories are at github.com/jholtom
@invisiblek was pretty awesome in getting this going, much more credit goes to him than me, he really had the base for this, and now I just fix crap for the ls990.
@Berzerker7, shoutout because I stole your thread body.
XDA:DevDB Information
[ROM][CM11][UNOFFICIAL] CyanogenMod 11, ROM for the Sprint LG G3
Contributors
jholtom, invisiblek, Clark44
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Beta
Created 2014-11-15
Last Updated 2014-11-15
Click to expand...
Click to collapse
Could you post link for pa gapps or direct us to what post number for the thread you linked
Sent from my LGLS990 using Tapatalk
The thread linked is the main pa-gapps thread. You can pick which package you want from there.
http://forum.xda-developers.com/showthread.php?t=2397942
randyrampage609 said:
Awesome sauce going to do this right now
Sent from my LGLS990 using Tapatalk
---------- Post added at 11:37 AM ---------- Previous post was at 11:32 AM ----------
Could you post link for pa gapps or direct us to what post number for the thread you linked
Sent from my LGLS990 using Tapatalk
Click to expand...
Click to collapse
Post 1 lol
JustusIV said:
Post 1 lol
Click to expand...
Click to collapse
Haha ok but which one there is so many
Edit: oh there packages ok
Sent from my LGLS990 using Tapatalk
randyrampage609 said:
Haha ok but which one there is so many
Edit: oh there packages ok
Sent from my LGLS990 using Tapatalk
Click to expand...
Click to collapse
I was going to say.... Just read what you want... I take all the goodies...
Anything a normal user can do to help fix the BT?
Related
Nightly builds for the cm-10.2 branch for this device have stopped.
Please see here for nightly builds of cm-11.0 (kitkat)
Or continue for the stable cm-10.2 build...
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.3 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Instructions
First time flashing CyanogenMod 10.2 your device, or coming from another ROM?
Download the zip(s).
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions of your device (required when coming from stock!).
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Other Issues?
Before posting on this thread, make sure of a few things:
You've utilized the search function of the forums. Nothing irritates me more than lazy people who do not search for an answer before asking.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread. "I'm having problems rooting/unlocking" is NOT relevant here.
LOGS LOGS LOGS!!!! Use this: https://play.google.com/store/apps/...t=W251bGwsMSwyLDEsImNvbS50b3J0ZWwuc3lzbG9nIl0
Download Links
CyanogenMod:
Stable: http://download.cyanogenmod.org/?device=dlx&type=stable
Google apps addon:
Download: http://wiki.cyanogenmod.org/w/Google_Apps
Useful Links
BBQLog changelog
dlx CyanogenMod wiki
Jira issue tracker
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Special thanks to the CM10DNA team too, they've done great work on this device, and I look forward to working with them on official repos!
- Chad0989
- crpalmer
- Flyhalf205
XDA:DevDB Information
CyanogenMod 10.2 for the Verizon HTC Droid DNA, a ROM for the HTC Droid DNA
Contributors
invisiblek
Version Information
Status: Stable
Created 2013-09-13
Last Updated 2014-04-23
Known bugs:
Please do not post about these, we know they are broken.
Bluetooth audio skips - apparently, for now, using the performance or conservative governor will fix it
Please do not ask questions in this thread. Its for development. Please post logs when reporting problems or don't bother posting.
If it becomes a problem we can create a Q/A thread.
Working incredible good and fast. Speakers work in Hangouts yay!, mic still having issues in hangouts, google now and keyboard. Big Thanks!
to be clear, i cant use crpalmers kernel with this new build right?
Gorilla* said:
to be clear, i cant use crpalmers kernel with this new build right?
Click to expand...
Click to collapse
Not until I release a new version.
wooo official dlx thanks invisiblek, good to see you again
Sent from my HTC6435LVW using XDA Premium 4 mobile app
So our speaker amp works now? How's battery life with this kernel?
Sent from my HTC6435LVW using xda app-developers app
I'm so happy!
d3xt3rlab said:
Working incredible good and fast. Speakers work in Hangouts yay!, mic still having issues in hangouts, google now and keyboard. Big Thanks!
Click to expand...
Click to collapse
For anyone curious, he means the mic works but still cuts out after a while. Not any "worse off" :]
Probably a dumb question but can we flash this over flyhalfs un officials?
Sent from my HTC6435LVW using xda app-developers app
Wait so we've gone official??
Sent from my DLX using xda app-developers app
LanceSandino said:
Probably a dumb question but can we flash this over flyhalfs un officials?
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
I would say to clean flash as the officla nightly uses m7 kernel base among others.
@all
CM10.2 Official nightly news is reported in AndroidPolice :good::good:
http://www.androidpolice.com/2013/09/08/cyanogenmod-10-2-nighties-go-live-for-the-droid-dna/
Neither focal or the stock camera will focus for me. Anyone have a workaround?
Sent from my HTC6435LVW using Tapatalk 2
wonder if 9/8 is not recommended to flash either ?
https://plus.google.com/117962666888533781522/posts/ArqL2Yw8tun
So has anyone flashed the 9/8 build?
im downloading now but kinda am hesitant because all cm roms have been a bit buggy since the transition to 4.3
tdizzle404 said:
wonder if 9/8 is not recommended to flash either ?
https://plus.google.com/117962666888533781522/posts/ArqL2Yw8tun
So has anyone flashed the 9/8 build?
im downloading now but kinda am hesitant because all cm roms have been a bit buggy since the transition to 4.3
Click to expand...
Click to collapse
I have and it runs fine.
Sent from my Nexus 7 using Tapatalk 4
Thanks buddy still have 5 min left on download
Is anyone using a third party kernel that doesn't break anything?
tdizzle404 said:
Thanks buddy still have 5 min left on download
Is anyone using a third party kernel that doesn't break anything?
Click to expand...
Click to collapse
Keep the kernel stock. They have changed a lot so other kernels aren't gonna work. At least no crpalmers.
Sent from my Nexus 7 using Tapatalk 4
Been running this for a few hours! Very stable and fast so far!
I can't UV the stock kernel correct? I'm just so spoiled with CP's kernel and I like his HTC Color Enhancement mod lol
Sent from my HTC6435LVW using xda app-developers app
d08speed3 said:
I can't UV the stock kernel correct? I'm just so spoiled with CP's kernel and I like his HTC Color Enhancement mod lol
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
Keep stock for now. Palmer will make his soon enough.
Hit thanks if I helped! check out my site at www.circuitsaviors.com
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4.4 (Kitkat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Instructions
First time flashing CyanogenMod 11.0 your device, or coming from another ROM?
Download the zip(s).
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions of your device
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Issues?
Exposure sensor :crying:
Download Links
CyanogenMod:
Weekly: https://s.basketbuild.com/devs/JoseGalRe/ruby/
Google apps addon:
Download: http://forum.xda-developers.com/showthread.php?t=2397942
My miniGapps: https://s.basketbuild.com/devs/JoseGalRe/gapps/ I recommend this
Huge thanks:
sportsstar89 and jeepers007 - Great team to work for our HTC Amaze 4G
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
XDA:DevDB Information
CyanogenMod 11, ROM for the HTC Amaze 4G
Contributors
josegalre, sportsstar89
ROM OS Version: 4.4.x KitKat
Version Information
Status: Stable
Current Stable Version: 19/SEPT/14
Created 2014-07-19
Last Updated 2014-09-19
for me
Nice work man U RocX
@josegalre, Wow nice work,am happy to see another ROM in the market,will try it asap,
Dear for sake of information am asking that can you build a ROM based on @ravike14 's kernel, that dude is trying hard to keep our beloved RUBY alive,He just needs an ASOP ROM based on his kernel to make further progress.
Librastar said:
@josegalre, Wow nice work,am happy to see another ROM in the market,will try it asap,
Dear for sake of information am asking that can you build a ROM based on ravike14's kernel, that dude is trying hard to keep our beloved RUBY alive,He just needs an ASOP ROM based on his kernel to make further progress.
Click to expand...
Click to collapse
if friend, this week I will try to build with kernel ravike
Librastar said:
@josegalre, Wow nice work,am happy to see another ROM in the market,will try it asap,
Dear for sake of information am asking that can you build a ROM based on ravike14's kernel, that dude is trying hard to keep our beloved RUBY alive,He just needs an ASOP ROM based on his kernel to make further progress.
Click to expand...
Click to collapse
i agree with you, we really need an AOSP to see further development on this device, i myself am waiting for just that
---------- Post added at 03:43 PM ---------- Previous post was at 03:42 PM ----------
josegalre said:
if friend, this week I will try to build with kernel ravike
Click to expand...
Click to collapse
that is amazing work jose, congratulations on the new ROM, good to see your efforts
Guys, starting tomorrow publishes the files here, the reason is because here, I can upload of automatic way,
usually I use my script that compiles the rom 0 hours on Saturday, and the morning uploading to afh files with basketbuild,
I can modify my script to upload files automatic way!
New url: https://s.basketbuild.com/devs/JoseGalRe
Greetings!
​
Weekly version 26/JULY/14! built in my HOME! Kernel 3.0.101 ION With Linaro GCC 4.9 Cortex A8 and O3 optimization​
Well this latest build is awesome! The battery drain is gone; I did bump up the CPU minimum to 384 but the rest is working well. No crashes our hangs.
The ambient light sensor and exposure for the camera are borked, but that's to be expected.
[Edit] I should mention that I confirmed the second CPU is going offline correctly.
Sent from my Amaze 4G using XDA Premium 4 mobile app
@josegalre you should perhaps rethink your usage of the Linaro-4.9 toolchain in your builds and revert to version 4.8.x. There has been much discussion on the Linux forums about problems with GCC-4.9.x that the most recent Linaro toolchain is based upon. In fact Linus himself has submitted several major bug reports and cursed Debian for switching to it prematurely. Apparently there have been numerous instances where kernels compiled from it fail to boot or function correctly (among other things).
There is an article on Slashdot.org right now where he slams the developers for releasing a compiler that's so buggy that it can't properly compile his kernel. The article is entitled, Linus Torvalds: "GCC 4.9.0 Seems To Be Terminally Broken". Here is a link to the article that I'm referring to http://m.slashdot.org/story/205139
Odysseus1962 said:
@josegalre you should perhaps rethink your usage of the Linaro-4.9 toolchain in your builds and revert to version 4.8.x. There has been much discussion on the Linux forums about problems with GCC-4.9.x that the most recent Linaro toolchain is based upon. In fact Linus himself has submitted several major bug reports and cursed Debian for switching to it prematurely. Apparently there have been numerous instances where kernels compiled from it fail to boot or function correctly (among other things).
There is an article on Slashdot.org right now where he slams the developers for releasing a compiler that's so buggy that it can't properly compile his kernel. The article is entitled, Linus Torvalds: "GCC 4.9.0 Seems To Be Terminally Broken". Here is a link to the article that I'm referring to http://m.slashdot.org/story/205139
Click to expand...
Click to collapse
Friend several days ago I was reading about it, and The error which torvalds mentioned is in 4.9.0,
but it is unknown whether this in 4.9.1 (with which I build), at the time of build, I have no errors on MSM8660
in MSM8960 had some errors specifically on interactive governor, bugs fixed
thanks for being outstanding, and if necessary I will use 4.8.x, since before compiling with (4.7 stock)
https://github.com/Arc-Tools/android_prebuilt_linaro
I turned on art and now the phone is stuck on the boot screen and for some reason I can't get to the bootloader
Sent from my One using Tapatalk
---------- Post added at 01:00 AM ---------- Previous post was at 12:46 AM ----------
Never mind I was able to get into the bootloader
Sent from my One using Tapatalk
king_david43 said:
I turned on art and now the phone is stuck on the boot screen and for some reason I can't get to the bootloader
Sent from my One using Tapatalk
Click to expand...
Click to collapse
Do you have xposed installed?
Xposed + art = crashes
No I don't have exposed installed. Maybe it was some other app I had I'm not sure. But its all good now. I'm reflashing the ROM now [emoji16]
Sent from my One using Tapatalk
---------- Post added at 01:16 AM ---------- Previous post was at 01:03 AM ----------
One more thing. Not sure if anyone cares but it seems to me that the snapchat camera isn't affected by the exposure issues as much as the other cameras
Sent from my One using Tapatalk
I'm seeing something odd in audio. Notification sound and the ringer work fine, but Apollo, overdrive media console and sound previews that are supposed to play when you pick a notification sound or ringtone don't make a peep.
Sent from my Amaze 4G using XDA Premium 4 mobile app
Apollo is skipping all songs at 0:00 and doesn't play any. Not a fan of this Apollo I use Poweramp anyway.
That's the only issue I've seen, using this cm11 since Saturday. All good
Sent from my Amaze 4G using XDA Premium 4 mobile app
I couldn't play any audio without issues in the 26th build. The Ringer didn't even work.
send me logcat please, works for me everything related to audio
Enviado desde mi One XL
will odexing this rom affect performance and how do i disable the second cpu?
use powersave profile!
Weekly 02/AUG/14! built in my HOME! Kernel 3.0.101 ION
With Linaro GCC 4.9.1-07-2014 Cortex A8 and O3 optimization​
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.0.x (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, dead cats,
* thermonuclear war, or you getting fired because the alarm app failed.
* YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will break it! :P
* Act accordingly
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
The source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Important information:
This thread is for CyanogenMod 12 opensource builds for the LG G3 (D855). The following will not be supported in this thread:
Custom Kernels
Mods
Modified system files
Xposed
Instructions:
-- coming from other roms:
Make a backup on TWRP (always highly advised)
Wipe data/factory reset
Flash CyanogenMod
Reboot and enjoy
-- updating CyanogenMod rom:
Download update
Flash in recovery (no need to wipe)
Reboot and enjoy
Issues?
Experience issues? Please provide the following info:
If the device was hard reboot, please provide the file "/proc/last_kmsg".
If the device was soft reboot or is "bootlooping", please run a logcat and provide the full output.
Please use Pastebin when possible.
CyanogenMod:
Latest Nightly: Download
Changlog: CM12 Nightlies Changelog - D855
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
XDA:DevDB Information
CyanogenMod 12, ROM for the LG G3
Contributors
AngelBob, invisiblek, finnq, sooti, manups4e
Source Code: https://github.com/CyanogenMod/
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2015-01-07
Last Updated 2015-11-14
Where can I find the current bugs?
Tapatalked thru my LG G3
Thanks for making the thread. How's it running? How's it feel compared to the unofficial builds?
Gapps missing from your post
Sent from my LG-D855 using XDA Free mobile app
GTMoraes said:
Where can I find the current bugs?
Click to expand...
Click to collapse
http://forum.xda-developers.com/devdb/project/?id=7560#bugReporter
sabret00the said:
Thanks for making the thread. How's it running? How's it feel compared to the unofficial builds?
Click to expand...
Click to collapse
Just the same for me
Anarchy66 said:
Gapps missing from your post
Click to expand...
Click to collapse
Yup, There are no CM12 Gapps on the wiki: http://wiki.cyanogenmod.org/w/Google_Apps
gapps
Can I use pa gapps with this Rom?
telar said:
Can I use pa gapps with this Rom?
Click to expand...
Click to collapse
yes you can! use the LP PA gapps! flash rom flash gapps reboot. same procedure since cm6.
masterismos said:
yes you can! use the LP PA gapps! flash rom flash gapps reboot. same procedure since cm6.
Click to expand...
Click to collapse
Awesome, ty, for quick response! I'm sorry of new to this so didn't know for sure.
Aw.. It doesn't work with MultiROM. Which one needs to be fixed? MultiROM or CM?
Tapatalked thru my LG G3
I'm on the first nightly right now and notice that the loudness of the speaker used to be boosted up.
I know AndroidUser do have the loudness enhancement patch of d855 and it works.
Please emerge it into the official build.
Finally, thank you for supporting the d855.:thumbup::thumbup:
Sent from my LG-D855 using XDA Free mobile app
Setup Wizard has stopped
Damm. :crying:
1st boot after install [ROM][D855] CyanogenMod 12 OFFICIAL Nightly [Android 5.0 Lollipop] loop text Unfortunately, Setup Wizard has stopped. I reboot and same hapend.
johnpat said:
I'm on the first nightly right now and notice that the loudness of the speaker used to be boosted up.
I know AndroidUser do have the loudness enhancement patch of d855 and it works.
Please emerge it into the official build.
Finally, thank you for supporting the d855.:thumbup::thumbup:
Sent from my LG-D855 using XDA Free mobile app
Click to expand...
Click to collapse
+1 :good:
GTMoraes said:
Aw.. It doesn't work with MultiROM. Which one needs to be fixed? MultiROM or CM?
Tapatalked thru my LG G3
Click to expand...
Click to collapse
To make it work as a secondary rom, the updater-script needs small changes. For instructions see my post here. It's for a different rom, but the code snippet in that post shows you which lines to comment out in the updater-script (located in /META-INF/com/google/android). In D855 rom those are lines 10-15 and 22.
Wow finally official Thank you very much for excellent work! I was waiting for CM since i got device.
Is there still problem with video playing/recording and calls? I was looking for bugs list but found only Setup crash.
Great that it is Official now. Looking forward for a stable CM12.
Sent from my LG-D855 using Tapatalk
Hi @AngelBob you forgot me in the thanks section ^^
Whoa great!! Can't wait to flash! Lets have a nice flashing weekend
manups4e said:
Hi @AngelBob you forgot me in the thanks section ^^
Click to expand...
Click to collapse
Had the same reaction ^^
tobitege said:
To make it work as a secondary rom, the updater-script needs small changes. For instructions see my post here. It's for a different rom, but the code snippet in that post shows you which lines to comment out in the updater-script (located in /META-INF/com/google/android). In D855 rom those are lines 10-15 and 22.
Click to expand...
Click to collapse
You're the man! I'll give this a shot. Thank you
--------------
Didn't work.. black screen with
"An Error Ocurred.
Shutting down MultiROM to avoid data corruption"
is this a ROM or MultiROM problem?
Is it the official?
Sent from my LG-D855 using XDA Premium 4 mobile app
crpalmer said:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.x (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Instructions
Download the zip(s).
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions of your device (required when coming from stock!).
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Known Issues
* None
Other Issues?
Before posting on this thread, make sure of a few things:
You've utilized the search function of the forums. Nothing irritates me more than lazy people who do not search for an answer before asking.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread. "I'm having problems rooting/unlocking" is NOT relevant here.
LOGS LOGS LOGS!!!! Use this: SysLog by Tortel
Experience issues?
* Nightlies: bug reports are not accepted. You are relying on yourself and your peers in this thread for support!
* M-series: file a bug in Jira.
Download Links
CyanogenMod: download.cyanogenmod.org
Google apps addon:
Download: OpenGApps (Use "arm" and "5.1")
Useful Links
Changelog
Lt03wifi wiki
Device Tree
Kernel Source
CM ROM Source
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
XDA:DevDB Information
[5.1.x] [SM-P600] CyanogenMod 12.1 Nightlies for the Note 10.1 2014 Wifi (lt03wifi), ROM for the Samsung Galaxy Note 10.1 (2014 Edition)
Contributors
Shawn5162, Shawn5162, joshndroid, Orion116
ROM OS Version: 5.1.x Lollipop
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2015-11-30
Last Updated 2015-11-29
Click to expand...
Click to collapse
Reserved
NOTE:
I am not blind...I can see the DL link doesn't work yet. Nightlies should begin rolling out within the next 24-48 hrs. for this device. Once that happens the link(s) will work.
Also HUGE thanks to @RaymanFX for the original CM tree for this device.
The maintainer for this device are:
@Shawn5162 (if that wasn't obvious already)
@joshndroid (that should have been obvious too cause he is BOSS)
@Orion116 (#STFUWiley )
First?
If you follow me on G+ you would see why @Shawn5162 added that hashtag[emoji23]
Sent from my SM-P600 using Tapatalk
The wiki says that our device name is "Lto3wifi", however it should be It03wifi. I look forward to trying this out once the download link works. Thanks for your hard work for our device!
---------- Post added at 10:08 PM ---------- Previous post was at 10:04 PM ----------
Orion116 said:
First?
Sent from my SM-P600 using Tapatalk
Click to expand...
Click to collapse
Read the op before posting (the second part, last line)?.
mosimchah said:
The wiki says that our device name is "Lto3wifi", however it should be It03wifi. I look forward to trying this out once the download link works. Thanks for your hard work for our device!
---------- Post added at 10:08 PM ---------- Previous post was at 10:04 PM ----------
Read the op before posting (the second part, last line)?.
Click to expand...
Click to collapse
?
Sent from my SM-P600 using Tapatalk
The nightlies should be f2fs ready I have added all the files
Sent from my Nexus 9 using Tapatalk
That's a great news to have a team working on Our Device !
Thanks a lot
when I click on the download link , I get this message " Internal Server Error " . is it only me or the download link is dead !
thanks
machhho said:
when I click on the download link , I get this message " Internal Server Error " . is it only me or the download link is dead !
thanks
Click to expand...
Click to collapse
Is it only you who can't read the second post...
machhho said:
when I click on the download link , I get this message " Internal Server Error " . is it only me or the download link is dead !
thanks
Click to expand...
Click to collapse
One word wow
Sent from my SM-P600 using Tapatalk
I'm vibrating off my seat for this! GIMME GIMME GIMME
I'am sorry for my bad formulation. I only wanted to ask why you starting to put more efforts in cm 12.1, if everyone waits for cm13.
It wasn't my Intention to be rude or ungrateful relating to your hard work on this project.
Stogie87 said:
Mhh... i am a little bit surprised, that you guys starting this project with cm 12.1 and not directly with cm 13.
Is there a reason for this?
Click to expand...
Click to collapse
Yes, there is reason. I don't have to tell you how rude this sounds. Enjoy the ROM and wait.
Sent from my SCH-R530U using Tapatalk
Stogie87 said:
I'am sorry for my bad formulation. I only wanted to ask why you starting to put more efforts in cm 12.1, if everyone waits for cm13.
It wasn't my Intention to be rude or ungrateful relating to your hard work on this project.
Click to expand...
Click to collapse
You got to remember out tablet shipped with Jellybean (4.3). It's old. We wanted to get official CM support ASAP and we had a stable cm-12.1 base. So we thought, why not get nighties going while we can. CM 13 (android 6.0) is putting up a bit of a fight right now. Once we get even a semi-stable build we will release it.
@all
Nightlies begin tonight
Enjoy and once again thanks to all the people mentioned in section post!
Shawn
Ok, i think i understand the difference. Now an official cyanogenmod Team also supporting our Rom. That sounds really good. If they could manage it, that screen mirroring will work stable on our device, i will definitively change back from touchwiz 5.1.1 rom to cm 12.1. Thanks for it.
The download is only 6mb. Is it a delta, and can it be flashed on top of Temasek's current build?
Sent from my SM-P600 using Tapatalk
Apparently the wiki was deleted. Also, flashing this won't replace twrp with the cm recovery right?
mising said:
The download is only 6mb. Is it a delta, and can it be flashed on top of Temasek's current build?
Click to expand...
Click to collapse
Seems to be just a 'recovery'
Tiemichael said:
Seems to be just a 'recovery'
Click to expand...
Click to collapse
There are actually two downloads. One is the build and the other is the recovery. The checksums are good on both, but the full builds are normally around 200 + mb and the deltas were around 50ish mb. I'm just curious as to whether or not the upload completed.
Sent from my SM-N910V using Tapatalk
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.1 (LP), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
BEFORE INSTALLING THIS ROM, MAKE SURE YOUR DEVICE MODEL IS THE SAME AS TITLE
IF YOU ASK ANY QUESTIONS LIKE "IS THIS FOR MODEL BLABLABLA" THEY WILL BE ALL IGNORGED
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
We'll not support users and answer questions from users which:
are running a custom kernel
have flashed mods
modified system files
didn't follow our intructions word by word
are unfriendly
And most important: DON'T READ THE OP
What's working:
Wifi (connection, tethering, etc)
Bluetooth (need quick patches in download link)
Camera, video codecs
RIL (Calls, SMS, mobile data)
Storage (both internal and external)
MTP storage (both internal and external)
Offline charging
zRAM (compressed-RAM swap)
GAPPS
Tethering (USB, Wifi, Bluetooth)
GPS
Sound recording
Torch (flashlight)
BUGS/Not working:
Laggy recorded videos. In this case, use MX Player, choose SW codecs when you play these videos, they will become normal
Switching to other fonts will get bootloops after restart. In this case, if you use TWRP recovery, go to File Manager >> delete "themes" from /data/system would help you escape this without factory reset
First time installing CyanogenMod 12.1 to your Galaxy Core Prime, or coming from another ROM:
Install TWRP Recovery
Reboot into Recovery using 3-button-combo (Vol-up+Home+Power)
Do a Nandroid backup! (Optional and only if you weren't running TouchWiz before)
WIPE (wipe data/factory reset + wipe cache partition + format /system partition)*
Install the ROM from sdcard using TWRP Recovery
Optionally install the Google Apps ( get it here: https://opengapps.org ) (pico GAPPS recommended)
DOWNLOADS:
Click to expand...
Click to collapse
ROM: Link
Quick patches: Link
CHANGELOG
Code:
- 2016/06/25
+ Initial release, ported from Galaxy V's CM12.1
- 2016/06/27
+ Switched to built-from-source, no more portings
+ Fixed nearly all problem, except fonts
+ Underclocked to 1,2GHz for stable usage
+ Enable multi-threaded dex2oat >> Faster app installation
+ Fixed installation for some apps (FB, etc...)
Want some screenies? Get them from Screenshot tab
XDA:DevDB Information
CyanogenMod 12.1, ROM for the Samsung Galaxy Core Prime
Contributors
doesntexits, Dreamstar
Source Code: https://github.com/koquantam/android_device_samsung_core33g/tree/cm-12.1
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock 4.4.x
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 2
Stable Release Date: 2016-06-27
Created 2016-06-25
Last Updated 2016-07-14
Yehey! Hahaha.
Great job @doesntexits, great to see all major things are working! (Are they really working RIL, WiFi? If yes, wow) Suitable for daily use. Thanks!
Edit: I'm running out of 'Thanks' today. So, I'll give this thread a 'thanks' tomorrow. Haha.
Updale the title bro. Put the Model Number.
AtomR said:
Great job @doesntexits, great to see all major things are working! (Are they really working RIL, WiFi? If yes, wow) Suitable for daily use. Thanks!
Edit: I'm running out of 'Thanks' today. So, I'll give this thread a 'thanks' tomorrow. Haha.
Click to expand...
Click to collapse
See screenies for more
Only One Bug That would be great
doesntexits said:
See screenies for more
Click to expand...
Click to collapse
Just saw them! This is gonna be daily driver on my phone. BTW, is there any possibility for that font-related bug to be fixed? I see it's there in GV CM12.1 since ages.
AtomR said:
Just saw them! This is gonna be daily driver on my phone. BTW, is there any possibility for that font-related bug to be fixed? I see it's there in GV CM12.1 since ages.
Click to expand...
Click to collapse
This is CM's fault itself, but this thingy is fixed in CM13, so be wait for CM13 going stable
Dreamstar said:
Only One Bug That would be great
Click to expand...
Click to collapse
Yeah, that sh!tty bug
doesntexits said:
This is CM's fault itself, but this thingy is fixed in CM13, so be wait for CM13 going stable
Click to expand...
Click to collapse
Ahh. Ok. Well, I can surely live without changing fonts.
Title has been changed. And you also put G360HU @doesntexits.
JustFrame said:
Title has been changed. And you also put G360HU @doesntexits.
Click to expand...
Click to collapse
Also removed quotes in my signature too due to characters exceeds limits
if i in stock rom with rooted
and my kernal not updated to latest
can i flash this ??
and which recovery ?
thnks in advance
---------- Post added at 05:38 PM ---------- Previous post was at 05:31 PM ----------
please reply...am waiting for your reply
i hve CWM recovery
Thanks a lot. @doesntexits @Dreamstar
@AtomR
You promised me not ditching this phone right? So just keep up with it. There will be more fun with this phone
And I've made surprises to people by releasing 2 ROMs in a day, with upgraded version of Android
Sent from my SM-G360H using XDA Labs
For Gaps what should I choose? ARM, ARM64 etc??
wowwwwww suprb work dude......so nice so smooth thnks bro
I found another bug: Video recording doesn't work
Probably codecs thingy here
Sent from my SM-G360H using XDA Labs
Boy, i love you! Thank you!
choose ARM instead of ARM64