[Q] Help me to repair my my android tablets penta ws1001q - Android Q&A, Help & Troubleshooting

hello, i am having a problem with my tablet name : penta ws1001q
the problem is that it stuck at the manufacturer i can only access the recovery mode.
I made a factory data reset and format cache but this has not solved my problem.
So i have have downloaded its driver on the manufacturer website and i have download drivers(it include sp flash tool, an the tabs image) for my tablets the problem is that i don't know how to use them.
I am asking you if you can give me a clear explanation on how to install this driver to my tablet and also how to use sp flash tool and get my tab in the download mode. I have already try using adb command but it did not work the tab just boot and stuck at manufacturer logo.
Please help me.

Related

[Q] Galaxy S2 not getting to download mode

GUYS, MY Device(Galaxy S2 GT-I9100) In recovery mode
1. full test
2. Item test
3. Test report
4. Version
5. Reboot and noting is working to get into download mode and also PC is not detecting the device.
i tried vol down + home + power not worked.
when I factory reset the device its language changes to Chinese again I have to change in English.
Device SW version is 2.3 and SHOWN model is A-102 ( HTC ) which i was seen in recovery mode but actually PHONE MODEL is Galaxy S2 GT I9100
Guys need help i need to update it to official JB.
As i was new to this. so guys give some explanation in detail to get it. I have downloaded Odin 3 , i have downloaded Official JB-XXLSJ , SP flash tool (but dont know how to use it), i installed ADB in my pc with steps followed through website. but it wasn't installed google drivers while ADB installation.
also tried to root process without pc like poot debug app and ministro II app superuser app istalling in my device but no use.
MAJOR PROBLEM IS DEVICE IS NOT GETTING INTO DOWNLOAD MODE, BUT GETS TO RECOVERY MODE, IN RECOVERY ABOVE MENTIONED IS DISPLAYED... SO...
I Think you guys got what my problem is...!!!
/////////// GUYS ANY ONE //////// NEED HELP ///////
Hi there,
First of all you need Odin program for flash any firmware.
Please wait until mods will move this thread to the device specific forum for more relevant answers.
Stand by
Good luck
[email protected] said:
GUYS, MY Device(Galaxy S2 GT-I9100) In recovery mode
1. full test
2. Item test
3. Test report
4. Version
5. Reboot and noting is working to get into download mode and also PC is not detecting the device.
i tried vol down + home + power not worked.
when I factory reset the device its language changes to Chinese again I have to change in English.
Device SW version is 2.3 and SHOWN model is A-102 ( HTC ) which i was seen in recovery mode but actually PHONE MODEL is Galaxy S2 GT I9100
Guys need help i need to update it to official JB.
As i was new to this. so guys give some explanation in detail to get it. I have downloaded Odin 3 , i have downloaded Official JB-XXLSJ , SP flash tool (but dont know how to use it), i installed ADB in my pc with steps followed through website. but it wasn't installed google drivers while ADB installation.
also tried to root process without pc like poot debug app and ministro II app superuser app istalling in my device but no use.
MAJOR PROBLEM IS DEVICE IS NOT GETTING INTO DOWNLOAD MODE, BUT GETS TO RECOVERY MODE, IN RECOVERY ABOVE MENTIONED IS DISPLAYED... SO...
I Think you guys got what my problem is...!!!
/////////// GUYS ANY ONE //////// NEED HELP ///////
Click to expand...
Click to collapse
Is your phone even genuine? Recovery should even look like that!? Did you use this link to download ADB and drivers: http://forum.xda-developers.com/showthread.php?t=2038555 Did you try updating drivers via device manager?

help: my lenovo sisley s90u bricked

i have lenovo sisley s90u 1gb ram and its bricked, its keep bootloop and when i try to enter recovery mode its just get "warning invalid image enter fastboot mode". i have download the firmware but still i cant flash it. please help me how to unbrick this sisley? sorry for my bad english.
juntax said:
i have lenovo sisley s90u 1gb ram and its bricked, its keep bootloop and when i try to enter recovery mode its just get "warning invalid image enter fastboot mode". i have download the firmware but still i cant flash it. please help me how to unbrick this sisley? sorry for my bad english.
Click to expand...
Click to collapse
You can't flash stock firmware because of driver is not installed on PC
Install your Chip set Driver on PC.
( I recommend You to install VCOM driver)
Same problem
Rajaks said:
You can't flash stock firmware because of driver is not installed on PC
Install your Chip set Driver on PC.
( I recommend You to install VCOM driver)
Click to expand...
Click to collapse
I have the same problem. I bought the phone and un-boxed it but it had a Wifi issue as the Wifi would not turn on no matter what i tried so i unlocked the bootloader and added custom TWRP and flashed a lollipop on it and now the Wifi is working but now cant get into recovery mode to flash gapps and all Im getting is: warning invalid image. enter fastboot mode so i need also to know how i can fix that can someone help
i have lenovo sisley s90u 1gb ram,i was updated rom by using lenovo mobile assistant moto. but after updating i can't use google play store ! please help me. how can i use google play store & other google app?
please mail me on: [email protected]

Lenovo A536 wont load

Greetings,
I have Lenovo A536 android 4.4 smartphone rooted with Kingroot app
I tried to update vibeUi this morning despite the warning of rooted device.Update failed and i removed the battery when screen stopped cause device didnt turn off from power button
>Phone now enters only Boot recovery menu and reaches till lenovo logo.The phone doesnt recognise SD Card
I tryed to wipe data/factory defaults and cache so far from boot recovery menu.The other options didnt work.
>Tried so far stock roms A536_S175_150105_ROW
, A536_S147_140910_ROW with Smart Phone Flash Tool a
nd Sp Flash Tool without any luck.Also Installed SDK Tools with 4.4.2 and run through CMD line
but commands wont respond.(trying adb bridge)
Please provide me with info explain me with details what should i do, because i am total amateur using
android tools.I know it was dumb to do those things to phone so i am paying the price now (The warranty of the phone is on if i messed it badly).
Thanks in advance.

Wolder miTab 4.2: Frozen On Boot Screen

My tablet frozen on boot screen (help!)
Hello everyone, I'm new here. I hope this is the correct place to write this problem and you can help me with it.
I bought one year ago a Wolder miTab MINT with Android 4.2. This tablet hasn't got the Play Store, then I decided to root the tablet and install the apk. The problem is that now the Play Store is using to much ram or cache (I don't remember) and because of that the tablet can't goes any further than the boot screen.
The solution will be to reset the tablet like was before but I tried everything without good results. For example:
1.- Use the recovery mode and use wipe data/factory reset. Don't work.
2.- I downloaded the Phoenix Suite and the firmware of this tablet. The software doesn't detect the tablet in normal mode or recovery mode.
3.- I installed the ADB generic drivers. My computer detect the tablet like Galaxy adb tablet or something like that but the Phoenix Suite still the same, it doesn't detect the tablet.
4.- My last option was to try to install the firmware (.img file) with adb sideload. The computer send the file but the tablet shows an error in the verification and it doesn't begin to install it.
Please, any help to reset this tablet to factory settings?? Thanks a lot!!
Fix it
Have you had any solution for this problem?

Help for zh960 china tablet

Hi to all! I bought a tablet from wish and i discover that is fake its hardware. On my tries to upgrade it i brick it. The motherboard is zh960 mb v4.1 20180508.
So i found around after lot of search this rom. I think is the same. i have install it and shows message 'boot error!!!!!!!' PC don't recognize tablet it opens recovery menu but dont work.
thank you first and sorry for my bad English.
https://drive.google.com/drive/folders/1CbOKvggktmVdU4mBq6CVnkCsyv9jcqv7
Anyone help please? also my recovery don't work. it enters into menu and when selected recovery reboot when enters normal same error screen and when enters into fastboot mode pc recognize only tablet interface and adb don't see device or unlock bootloader or other commands.
Hello
Hello,
I am struggling for a recovery.img for this tablet.
Can someone please upload one for me so i could help the 2 gentleman above by creating an image from my rom?
hi !!, i need this rom too, if any of you have this ROM please send it to this email. [email protected]

Categories

Resources