Q&A for [ROM] [4.4.2] [Sense 6] [Demon Dust] [11.22.14] [SPR][VZW]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] [4.4.2] [Sense 6] [Demon Dust] [11.22.14] [SPR][VZW]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
keeps rebooting (sprint version)
I'm at a loss. Since unlocking my bootloader, flashing TWRP and installing CM11, this is the second Sense rom that doesn't work for me. (unlocked bootloader, s-on, Sprint HTC One Max)
Just as with Adrenaline, I'm able to successfully flash the rom in TWRP and it boots to the HTC setup menu. But shortly thereafter the phone reboots. After that it seems to reboot every 90 seconds. I can't reflash Cm11 without a problem. But as soon as I flash this or Adrenaline the reboot problem reoccurs. Anyone know what I'm ****ing up?
kapsama said:
I'm at a loss. Since unlocking my bootloader, flashing TWRP and installing CM11, this is the second Sense rom that doesn't work for me. (unlocked bootloader, s-on, Sprint HTC One Max)
Just as with Adrenaline, I'm able to successfully flash the rom in TWRP and it boots to the HTC setup menu. But shortly thereafter the phone reboots. After that it seems to reboot every 90 seconds. I can't reflash Cm11 without a problem. But as soon as I flash this or Adrenaline the reboot problem reoccurs. Anyone know what I'm ****ing up?
Click to expand...
Click to collapse
I sent you a PM, but figured I would also respond here. Make sure that the version of TWRP that you are using is from Fly's thread here on XDA:http://forum.xda-developers.com/showthread.php?t=2498746
If you are using TWRP from Fly's thread, make sure you are not wiping System when flashing the ROM since this is done automatically.
Hope this helps you.
bfisch3r said:
I sent you a PM, but figured I would also respond here. Make sure that the version of TWRP that you are using is from Fly's thread here on XDA:http://forum.xda-developers.com/showthread.php?t=2498746
If you are using TWRP from Fly's thread, make sure you are not wiping System when flashing the ROM since this is done automatically.
Hope this helps you.
Click to expand...
Click to collapse
Hi, thanks for the reply.
I've tried both 2.8.0.1 and 2.8.1.0 from that thread you linked. I have followed the instructions in your OP. I only do the swipe to wipe, I don't do any advanced wiping. I think I'm missing something somewhere. The phone starts fine and boots into Android. Once I'm there it reboots after a minute or so. What could cause such an issue?
CM11 flashes perfectly fine and works too except for the lack of Spark and the Wifi profile reset. This is really strange.
kapsama said:
Hi, thanks for the reply.
I've tried both 2.8.0.1 and 2.8.1.0 from that thread you linked. I have followed the instructions in your OP. I only do the swipe to wipe, I don't do any advanced wiping. I think I'm missing something somewhere. The phone starts fine and boots into Android. Once I'm there it reboots after a minute or so. What could cause such an issue?
CM11 flashes perfectly fine and works too except for the lack of Spark and the Wifi profile reset. This is really strange.
Click to expand...
Click to collapse
Did you ever flash an unsecured kernel?
bfisch3r said:
Did you ever flash an unsecured kernel?
Click to expand...
Click to collapse
Hmm I don't think so. All I did was unlock the bootloader on HTC's website. Then I followed Cyanogen's instructions to put CM11 on there. After I was dissatisfied with the LTE/Wifi issues I tried flashing the Adrenaline rom. When that didn't work I tried yours.
I should mention that I did buy this phone earlier this year on ebay. Supposedly new. Is there a way to find out if the previous owner did flash a different kernel?
kapsama said:
Hmm I don't think so. All I did was unlock the bootloader on HTC's website. Then I followed Cyanogen's instructions to put CM11 on there. After I was dissatisfied with the LTE/Wifi issues I tried flashing the Adrenaline rom. When that didn't work I tried yours.
I should mention that I did buy this phone earlier this year on ebay. Supposedly new. Is there a way to find out if the previous owner did flash a different kernel?
Click to expand...
Click to collapse
I would suspect this to be your problem. After you did your initial flash of TWRP, you created a backup of your phone and saved it...correct?
I am on your sprint version on the ROM and love it. It has been my daily driver for a while but i have one problem.m I have not been able to get LTE to allow me to use wifi tethering at all.. every time I try the LTE signal comes and goes and never stays connected so i can only use 3g which isnt all that bad when i have a good signal, but when I know LTE is available to use itnwould be nice to get full speed from my phone.
I hope this ROM may come to International GSM model too.. :good::good::good:
bdiddled said:
Did you ever flash an unsecured kernel?
Click to expand...
Click to collapse
Hey I just wanted to let you know that I solved my problem in case someone else experiences the same issue. The problem ended up being the SuperSU included in the rom. It was causing the 60/90 second reboot. As soon as I let it update the binaries the reboots stopped.
thanks for all tbe help.
Tugboat Tony said:
I am on your sprint version on the ROM and love it. It has been my daily driver for a while but i have one problem.m I have not been able to get LTE to allow me to use wifi tethering at all.. every time I try the LTE signal comes and goes and never stays connected so i can only use 3g which isnt all that bad when i have a good signal, but when I know LTE is available to use itnwould be nice to get full speed from my phone.
Click to expand...
Click to collapse
I apologize, but i just saw this post. What version are you on?
---------- Post added at 11:48 PM ---------- Previous post was at 11:43 PM ----------
kapsama said:
Hey I just wanted to let you know that I solved my problem in case someone else experiences the same issue. The problem ended up being the SuperSU included in the rom. It was causing the 60/90 second reboot. As soon as I let it update the binaries the reboots stopped.
thanks for all tbe help.
Click to expand...
Click to collapse
Thanks for the update on what resolved your problem. As I'm learning, i found files i was missing when including SU in the ROM. The newer releases should not have these issues... Sorry for any inconvenience.
bdiddled said:
Thanks for the update on what resolved your problem. As I'm learning, i found files i was missing when including SU in the ROM. The newer releases should not have these issues... Sorry for any inconvenience.
Click to expand...
Click to collapse
That's great to hear. Thanks again for the all the tech support. :good:
Related
[Q&A] 【ROM】【4.4.2_r4】【SENSE-6.0】(¯`'•ADREN
Q&A for 【ROM】【4.4.2_r4】【SENSE-6.0】(¯`'•ADRENALINE-1.6•'´¯)【10/10/14】【VZW】【SPR】【INT】
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for 【ROM】【4.4.2_r4】【SENSE-6.0】(¯`'•ADRENALINE-1.6•'´¯)【10/10/14】【VZW】【SPR】【INT】. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
1.6 fail
Updated to 1.6 from my 1.4, then installed unsecure kernel and then FlyKernel, and here comes the "POOF!". THe phone gets stuck right after it boot into the system and reboots again. How do i fix that? Need help!
ARTURITCH said:
Updated to 1.6 from my 1.4, then installed unsecure kernel and then FlyKernel, and here comes the "POOF!". THe phone gets stuck right after it boot into the system and reboots again. How do i fix that? Need help!
Click to expand...
Click to collapse
Some users have had that issue which is why I don't include his kernel in the Rom anymore and stick with the stock kernel. Perhaps @Flyhalf205 can share some insight as to what you will need to do to get his working for you.
What model you have?
ARTURITCH said:
Updated to 1.6 from my 1.4, then installed unsecure kernel and then FlyKernel, and here comes the "POOF!". THe phone gets stuck right after it boot into the system and reboots again. How do i fix that? Need help!
Click to expand...
Click to collapse
I had a similar problem with another sense Rom. Try using a different recovery, I was on CWM and I had this issue, after I flashed TWRP it booted fine and had no problems since.
Sent from my HTC One Max on Adrenaline using XDA Free mobile app
Flyhalf205 said:
What model you have?
Click to expand...
Click to collapse
HTC One Max T6UL
---------- Post added at 07:12 AM ---------- Previous post was at 07:03 AM ----------
abhishekpujar said:
I had a similar problem with another sense Rom. Try using a different recovery, I was on CWM and I had this issue, after I flashed TWRP it booted fine and had no problems since.
Sent from my HTC One Max on Adrenaline using XDA Free mobile app
Click to expand...
Click to collapse
Used TWRP 2.7.1.1. downloaded from here, this means I gotta try swapping to CWM?
Boot to os after install? I'm sorry, can you explain? Thanks
tpa78mch said:
Boot to os after install? I'm sorry, can you explain? Thanks
Click to expand...
Click to collapse
it means that after flashing, you should boot (or go into) the actual rom. your recovery will ask you to boot into the system once the installation (flashing) is completed.
hope that helps.
Thanks for the info..it made sense after I read it again lol...Thanks again neo for such a great job on keeping the one max above the rest and not wonder what device is coming out next...but really...who is ready for the one max part 2?
1.7 for Sprint. Installed and ran it just fine at first but when trying to access the gallery through another app (setting the picture for my contact card) gallery just vanished. Reflashed rom, same thing happened. Just FYI. I downloaded HTC gallery from app store and all good now but did not know what could have caused this so thought you may want to know and advise?
blink feed on 1.7.5
Love your ROM man! Blink feed crashes on 1.7.5 for some reason. Anyone else?
Yeap blinkfeed crashes here also... Im baffled as to what possibly could be
Adrenaline 1.7.5 International BLink Feed Prob
Hi,
I clean flashed 1.7.5 ..verizon... Did it twice and blinkfeed keeps forceclosing when adding feeds.
And yes, i flashed the social networks.zip , but it doesnt work.
Sorry for my bad english.
Just to confirm, you guys that are having the blink feed issues are NOT on the official release correct? You're either on Adrenaline Neo or Adrenaline Dev?
IAmTheOneTheyCallNeo said:
Just to confirm, you guys that are having the blink feed issues are NOT on the official release correct? You're either on Adrenaline Neo or Adrenaline Dev?
Click to expand...
Click to collapse
Just to confirm International official release, Blink Feed no issue
I use normal international Rom, not dev or neo version, but it doesn't work.
enZiZZle said:
I use normal international Rom, not dev or neo version, but it doesn't work.
Click to expand...
Click to collapse
I'll look into it tomorrow
Having issues with Swype keyboard since installing 1.7.5. Lag and just hanging up. Plus the regular internet browser is jumping around and freezing. Any ideas? Thanks
1.9
Dirty flash looking great!
Hey neo, maybe yall talk to fly and include his kernel in the roms again? The overclocking ability was great!
Q&A for US Dev/AT&T 442/443/444 Debloated VVM/ISIS Release 10-19-2014
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for US Dev/AT&T 442/443/444 Debloated VVM/ISIS Release 10-19-2014. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Download:
M8 - 3.28.1540.5 (Read flashing instructions included in download)
[URL said:
http://goo.gl/o7A9xR[/URL]
For those who want to update to newest versions for developer build,you must have stock 2.22.1540.3 operating system and recovery and soff to run either of these files
Click to expand...
Click to collapse
hi, i have a stock rom AT&T 4.4.2 - firmware 1.58.502.1 - Root - S-ON (cant turn off)
can i install this "M8 - 3.28.1540.5 ROM+fimrware" directly?
No a firmware upgrade is needed for 4.4.4 to function correctly,need to be s-off for that.
Firmware question
So just to get this cleared up, i flash 2.22.1540.3, then after that 3.28.1540.5? Is the radio fix mandatory? Or only if 1.16?
Delete, senior moment
can flash 2.22.1540.3 (full firmware update) then 2.22.1540.4 (partial update) then flash 3.28.1540.5 firmware(full firmware update) no @ radio @1.16..
malteasers said:
So just to get this cleared up, i flash 2.22.1540.3, then after that 3.28.1540.5? Is the radio fix mandatory? Or only if 1.16?
Click to expand...
Click to collapse
Wonders_Never_Cease said:
can flash 2.22.1540.3 (full firmware update) then 2.22.1540.4 (partial update) then flash 3.28.1540.5 firmware(full firmware update) no @ radio @1.16..
Click to expand...
Click to collapse
I'm on 3.28.401.7 can I just flash 3.28.1540.5 or is it not the full firmware?
If I'm reading this correct I would first have to flash "2.22.1540.3" then 2.22.1540.4 and finally "3.28.1540.5"?
If I'm all wrong please excuse my ignorance
Its full firmware,the correct way would be to flash in sequence
ozziedog said:
I'm on 3.28.401.7 can I just flash 3.28.1540.5 or is it not the full firmware?
If I'm reading this correct I would first have to flash "2.22.1540.3" then 2.22.1540.4 and finally "3.28.1540.5"?
If I'm all wrong please excuse my ignorance
Click to expand...
Click to collapse
For those not able to post yet in the dev thread, an update was released today...
Did I miss the 4.4.4 ROM link?
I'm running the arHD rom and having problems like most people. I've got a 3.28.1540.5 firmware downloaded, but I seemed to have missed the link for the 4.4.4 ROM. Did I miss something in my reading or did it get pulled? A few people said they were running it already?
Was pulled today till I get back from Hospital,will post link for it then,sorry your having issues with arhd...seems to be issues with euro builds these days.
turbochad said:
I'm running the arHD rom and having problems like most people. I've got a 3.28.1540.5 firmware downloaded, but I seemed to have missed the link for the 4.4.4 ROM. Did I miss something in my reading or did it get pulled? A few people said they were running it already?
Click to expand...
Click to collapse
Wonders_Never_Cease said:
Was pulled today till I get back from Hospital,will post link for it then,sorry your having issues with arhd...seems to be issues with euro builds these days.
Click to expand...
Click to collapse
Okay.. just wanted to make sure I wasn't being an idiot (more than normal). Hope all is good, hospital's generally aren't a great place to be.
Links are live...and we all have our moments..lol..and nope not a good place to be at all...
turbochad said:
Okay.. just wanted to make sure I wasn't being an idiot (more than normal). Hope all is good, hospital's generally aren't a great place to be.
Click to expand...
Click to collapse
Okay dumb question, how do I remove all widgets from lockscreen? I've checked out everything on exposed and don't see it also searched Google. Ideas?
ozziedog said:
Okay dumb question, how do I remove all widgets from lockscreen? I've checked out everything on exposed and don't see it also searched Google. Ideas?
Click to expand...
Click to collapse
Slide your finger down on the widget then tap and hold on it and drag it to remove like normal
Sent from my HTC One_M8 using Tapatalk
ZeRo2o9 said:
Slide your finger down on the widget then tap and hold on it and drag it to remove like normal
Sent from my HTC One_M8 using Tapatalk
Click to expand...
Click to collapse
Thanks I tried that and its like they are locked, they move but once at the edge of screen they launch. I'll try it again in the morning. Thanks again.
Edit
Disregard I moved back to ViperOne 3.1.0 and its way more customizable I have it just like I like. Thanks
I installed the Rom per instructions, installed xposed, softcard, and just popular apps, no more tweaks. On my 4.4.2 Rom, I have my phone connected to my car via bluetooth, and once connected, it resumes music without having to take my phone out my pocket, unlock the phone, open the app and finally play. Was there a tweak done on the Kernel, maybe for battery savings, that prevents the phone from autoplay when connected to a car on the latest version of the Rom? If there is, can we make exceptions on the Kernel for maybe, Google play music?
Thanks in advance for any ideas.
No there was nothing changed by me with kernel or otherwise. Not all things remain same from htc with the newer builds..from my reading things will be completely different again with Lollipop. And also google has been changing things in thier apps as well in anticipation of 5.0. Long winded reply. Havent changed anything.
sgndroid1 said:
I installed the Rom per instructions, installed xposed, softcard, and just popular apps, no more tweaks. On my 4.4.2 Rom, I have my phone connected to my car via bluetooth, and once connected, it resumes music without having to take my phone out my pocket, unlock the phone, open the app and finally play. Was there a tweak done on the Kernel, maybe for battery savings, that prevents the phone from autoplay when connected to a car on the latest version of the Rom? If there is, can we make exceptions on the Kernel for maybe, Google play music?
Thanks in advance for any ideas.
Click to expand...
Click to collapse
Thanks for the replay, I always have the same problem every time I do a major update on a phone. It happened on my GSII, Note, S4 and now HTC.
Could check on radio manufacturers site for updates on headunit, I know my Kenwood has updates for compatability every so often
[Q&A] [ROM]CarHD 32.1S v1 NG6-NCx STOCK OR A TON MORE THEMES-TRANSPARENCY-VISUALLY S
Q&A for [ROM]CarHD 32.1S v1 NG6-NCx STOCK OR A TON MORE THEMES-TRANSPARENCY-VISUALLY STUNNING
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM]CarHD 32.1S v1 NG6-NCx STOCK OR A TON MORE THEMES-TRANSPARENCY-VISUALLY STUNNING. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
everything runs but no transparent anything
did clean wipe etc. but get no transparency on anything
CarHDRom V.32.1S VZW NG6-NCx v1 NG6-NCx STOCK
Every time I attempt to do a clean install of CarHDRom V.32.1S VZW NG6-NCx v1 on my sch-i545, I keep getting the following message while in aroma: file_getprop: failed to stat "/tmp/aroma/emoji.prop" no such file or directory (including quotes). When I reboot the phone I don't get any of the options that I chose during the aroma installation. All I get is the stock S5 rom. Can you please help me with this because I would really like to you use this rom along with all the features that I chose during installation. Thanks so much. Keep up the great work!!
MsBionic said:
Every time I attempt to do a clean install of CarHDRom V.32.1S VZW NG6-NCx v1 on my sch-i545, I keep getting the following message while in aroma: file_getprop: failed to stat "/tmp/aroma/emoji.prop" no such file or directory (including quotes). When I reboot the phone I don't get any of the options that I chose during the aroma installation. All I get is the stock S5 rom. Can you please help me with this because I would really like to you use this rom along with all the features that I chose during installation. Thanks so much. Keep up the great work!!
Click to expand...
Click to collapse
this issue has been resolved it was an error in the aroma scripting look for an update in an hour or 2 (uploading now)
---------- Post added at 01:08 AM ---------- Previous post was at 12:57 AM ----------
[email protected] said:
did clean wipe etc. but get no transparency on anything
Click to expand...
Click to collapse
hmmm interesting havent ran into that yet.... im working on a new version with another theme included and I can verify that transparency works (carotix was the first to have framework with transparency on the S4)
Hi great room as usual but one problem after flashing modules wife turns on but keeps trying to obtain ip address then connection fails wife works fine with other roms any help would b appreciated
I have the same ip issues and ive tried all of the fixes you have posted so far. Anything else i can try? I really like this rom. Also, I have a SCH-I545 on the carHD verizon rom, bit now in phone info it says im on a chaos rom and my phone is a gt-19505. Wassup with that and is that maybe my problem? If it really is the gt model now, does that mean i dont have to use safestrap now and could use a better recovery? Cant wait for your imput bro..
cheppallet said:
I have the same ip issues and ive tried all of the fixes you have posted so far. Anything else i can try? I really like this rom. Also, I have a SCH-I545 on the carHD verizon rom, bit now in phone info it says im on a chaos rom and my phone is a gt-19505. Wassup with that and is that maybe my problem? If it really is the gt model now, does that mean i dont have to use safestrap now and could use a better recovery? Cant wait for your imput bro..
Click to expand...
Click to collapse
not as far as you can throw the phone it shouldnt... i mean I'm on the same thing you guys are on and I use wifi/tethering/gps all day everyday.... I am working on an update for this ROM but our phones are tehnically that gt-19505 its simply so the built in apps recognize it as the same phone but i did mess up and kept the Chaos one in lol wont make a difference but I realize my mistake.
Ever since I upgraded to NG6 from NC5, I've been having the same issues that most have been experiencing with connected to WiFi: It tries to connect but no IP connection and no GPS. WIFI will scan and see available networks, i can attempt to connect to a network and pass authentication. It hangs when obtaining and ip from DHCP. I've tried every NC2 and NG6 WiFi fix and module but still no connection.
One thing that I noticed was that the build is listed as Chaos, ending in NG8, could that be one of the reasons why there's issues connecting to wifi? I really like this rom and I've tried every solution listed within this thread but to no avail. I'll look out for an update but in the meantime, I'll check out Phoenix 10 or just return to stock if nothing else works.
Thanks for all you do!!
MsBionic said:
Ever since I upgraded to NG6 from NC5, I've been having the same issues that most have been experiencing with connected to WiFi: It tries to connect but no IP connection and no GPS. WIFI will scan and see available networks, i can attempt to connect to a network and pass authentication. It hangs when obtaining and ip from DHCP. I've tried every NC2 and NG6 WiFi fix and module but still no connection.
One thing that I noticed was that the build is listed as Chaos, ending in NG8, could that be one of the reasons why there's issues connecting to wifi? I really like this rom and I've tried every solution listed within this thread but to no avail. I'll look out for an update but in the meantime, I'll check out Phoenix 10 or just return to stock if nothing else works.
Thanks for all you do!!
Click to expand...
Click to collapse
Have you or anyone tried the NC5 kernel, modules and bootloader combo to see if it gets rid of the DHCP issue?
Yes I tried using NC5 kernels and modules and still no connection.
LGtMgG2t said:
Have you or anyone tried the NC5 kernel, modules and bootloader combo to see if it gets rid of the DHCP issue?
Click to expand...
Click to collapse
35s v2 not booting for me. No boot animation just blue blinking l.e.d. running mdk.
Anyone get it to boot yet? I don't have enough posts to ask in the other section
No luck here either. I love this rom but can t seem to find a way to run it after 32.1s. It is STILL my daily driver.
mochamoo said:
No luck here either. I love this rom but can t seem to find a way to run it after 32.1s. It is STILL my daily driver.
Click to expand...
Click to collapse
Yeah I've tried everything I can think of and can't get it. Been running 32.1s myself love it but would like to see what the newer version looks like. Thought we had a shot with the ported version!
mochamoo said:
No luck here either. I love this rom but can t seem to find a way to run it after 32.1s. It is STILL my daily driver.
Click to expand...
Click to collapse
Are you on mdk also?
zekesamas said:
Are you on mdk also?
Click to expand...
Click to collapse
Yes I am.
CarHDRom_V.35S_VZW-V2-gogolie
I tried this update and it works fine!! All the modules included in the install (NC2, NC5, NG6) work fine, no need to install any other modules. I'll keep a look out to see if you add the NK1 modules to the install. The wifi works fine. The only issues that I've experienced is that the CarHDRom Turkbey causes force close issues, the GPS isn't working and there are force close issues when trying to access Contacts. Which may have to do with the Google Play Services since my apps from the play store no longer do an automatic update although I do have it set to do it. Other than that, a Very good-looking Rom. One of my favorites. Thanks for the great work!!
Will ss 3.72 work for this, or do I need ss 3.75?
Thanks!
Boot animation doesn't work but it will boot. No Wifi!!!!!! Other than that it's beautiful and I am using safe strap 3.75. Any ideas?
Sent from my GT-I9505 using XDA Free mobile app
Q&A for {KERNEL] Jmz A3UL Kernel v1
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for {KERNEL] Jmz A3UL Kernel v1. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
I was able to htcdev unlock the bootloader, root, and install the insecure kernel for my desire 610. I tried running universal rumrunner to get S-off but it says i need an insecure kernel. Help?
We don't have an s-off solution. They've all been patched thus far. Not even sunshine will work. Haven't tried rumrunner, but safely assuming that it came before sunshine and is also patched.
Any unusual behavior after flashing jmz?
First, my phone has been running a lot better since flashing this kernel. There's just one issue I've had and want to know if I should be concerned or If there's a simple fix.
About every fourth time I go to my car and plug the audio Jack in I get this crazy behavior. My phone, in know definite order will open a voice activated Google search, attempt ( and sometimes succeed in calling someone), and this seems to keep happening until I rebooted. Just exiting the Google search or ending the call won't stop it.
My best guess is it has to do with switching WiFi signals/4g. But maybe since I use Bluetooth in the car, that could be a factor as well???
Hard to tell. It's mildly annoying now but I could see it getting really aggravating especially if it keeps calling people. Before flashing jmz I had the typical WiFi trying to connect issue. That's thankfully fixed but this could be worse.
Is it just me? Any fixes? Thanks in advance. And I'm looking forward to the new Rom!
download link broken to kernel
can you send me a copy of the zip file to my email?
does this still allow for rw
Does this still let you change system files aand they will stick through reboot? Even if s-on is still enabled?
Yes.
would like to download the kernel but the link is broken. anyone have it or something. maybe email it to me. that would be great ^^. till then im sol.
jmz A3UL Kernel problems
I Root my device with ClearD's Desire 610 Root Tool, which also installed the JMZ Kernel. After rooting I have experienced some times freezing the device.
Tried again just to install the Kernel (after clearing dalvik & cache) the freezing disappeared (as far as I can tell) BUT the WiFi can not be enabled at all.
I Have international rom Build # 1.31.401.2
hirez66 said:
I Root my device with ClearD's Desire 610 Root Tool, which also installed the JMZ Kernel. After rooting I have experienced some times freezing the device.
Tried again just to install the Kernel (after clearing dalvik & cache) the freezing disappeared (as far as I can tell) BUT the WiFi can not be enabled at all.
I Have international rom Build # 1.31.401.2
Click to expand...
Click to collapse
Have you tried reflashing the entire ROM then flashing the kernel?
If it persists, that might indicate incompatability with your model of phone.
ninjasinabag said:
Have you tried reflashing the entire ROM then flashing the kernel?
If it persists, that might indicate incompatability with your model of phone.
Click to expand...
Click to collapse
Currently there is no ROM available for International HTC Desire 610
hirez66 said:
Currently there is no ROM available for International HTC Desire 610
Click to expand...
Click to collapse
There is stock firmware from which you can flash before testing the kernel.
ninjasinabag said:
There is stock firmware from which you can flash before testing the kernel.
Click to expand...
Click to collapse
Can you share a link for the firmware ?
hirez66 said:
Can you share a link for the firmware ?
Click to expand...
Click to collapse
I think he's talking about this...
http://forum.xda-developers.com/desire-610/general/info-htcdev-unlock-root-t2844323
I've been wanting to return to stock for awhile now so I can take the ota then root again but I worry about potential issues. Really I don't know enough and its hard to find answers here. I'm running same firmware as you though my phone is stable now so unless I get more information I might stay put till lollipop arrives.
But if all you want to do is go back to stock, this should work.
Can you ad elementalX to it?
Hey I can't download. When I open the link my browser gives me a error.
james.ellis92 said:
Hey I can't download. When I open the link my browser gives me a error.
Click to expand...
Click to collapse
PM me and I'll see if I can help
Link found!!!
download the direct link here: --------------> (remove hashtags i hate the new user restriction) ht#tps://ww#w.androidfilehost.co#m/?fid=95916177934552988
james.ellis92 said:
Hey I can't download. When I open the link my browser gives me a error.
Click to expand...
Click to collapse
---------- Post added at 04:36 AM ---------- Previous post was at 04:32 AM ----------
Here's the stock bootloader, recovery, and system for the htc desire 610 --------> (remove hashtags i hate the new user restriction) ht#tps://ww#w.androidfilehost.com/?w=files&flid=29203
hirez66 said:
Can you share a link for the firmware ?
Click to expand...
Click to collapse
Any update soon coming for this kernel?
nechko_ said:
Any update soon coming for this kernel?
Click to expand...
Click to collapse
+1 with wifi drop fixed...?? =∆
Q&A for [ROM] Stock ZV6 Base - Odex & Deodex
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] Stock ZV6 Base - Odex & Deodex. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Can this be flashed over my current setup?
Yup. And you can restore back if you want. The only thing that sticks is the modem
Again thanks for all the hard work. Really love the work you do.
OK so I made the leap and dirty flashed this over my current setup. Now I'm having issues with gmail fc'ing. So I uninstalled it thinking that may help. So I tried to install it from the play store and it says "incompatible update"??? Now I can't even sideload it as it tells me " application not installed". Any ideas as to why its doing this?
---------- Post added at 12:59 PM ---------- Previous post was at 12:47 PM ----------
OK so something weird just happened... I went into recovery to fix permissions to see if that would help and gmail was somehow reinstalled... Its still not working but weird.
---------- Post added at 01:04 PM ---------- Previous post was at 12:59 PM ----------
Disregard my previous posts. Its working now.
I'm really liking the ZV6 update! The ROM is smooth and no lag noticed. I was able to pick up cell signal quickly. Great Job!
I flashed this ROM, updated PRL/Profile and then flashed Sac 2. How can I verify that the modem stuck?
klarthur said:
I flashed this ROM, updated PRL/Profile and then flashed Sac 2. How can I verify that the modem stuck?
Click to expand...
Click to collapse
Go to Settings>About>Software. There will be 2 lines of numbers for the modem now.
It'll stick as Sacs doesn't include kernel or modem.
engine95 said:
Go to Settings>About>Software. There will be 2 lines of numbers for the modem now.
It'll stick as Sacs doesn't include kernel or modem.
Click to expand...
Click to collapse
I have two lines for Baseband. Would that be the same thing as the modem? Thank you for your time!
klarthur said:
I have two lines for Baseband. Would that be the same thing as the modem? Thank you for your time!
Click to expand...
Click to collapse
You got it.
A couple of questions. I have bump and twrp installed and rooted on zv4, everything else is stock, except the kernel. I flashed the oversharpening fix kernel. Can I apply this zv6 update to my phone without wiping data and keeping the fixed kernel? Also, should I download the odex or deodexed?
bryster126 said:
A couple of questions. I have bump and twrp installed and rooted on zv4, everything else is stock, except the kernel. I flashed the oversharpening fix kernel. Can I apply this zv6 update to my phone without wiping data and keeping the fixed kernel? Also, should I download the odex or deodexed?
Click to expand...
Click to collapse
You can probably dirty flash. But you will lose the kernel.
Obviously my recommendation is to start from scratch as there's enough changes/fixes in this update to give you issues.
On the odexed vs deodexed, you can Google it for a better explanation. But the simple answer is: Deodexed is way easier to Theme. But Odexed is said to run a bit faster/smoother because it caches the apps. If I remember that right.
Really the choice is up to you. If you want to Theme it, then you'll need deodexed.
engine95 said:
You can probably dirty flash. But you will lose the kernel.
Obviously my recommendation is to start from scratch as there's enough changes/fixes in this update to give you issues.
On the odexed vs deodexed, you can Google it for a better explanation. But the simple answer is: Deodexed is way easier to Theme. But Odexed is said to run a bit faster/smoother because it caches the apps. If I remember that right.
Really the choice is up to you. If you want to Theme it, then you'll need deodexed.
Click to expand...
Click to collapse
I dirty flashed the deodexed version and when i booted the phone up, i keep getting com.android.systemui has stopped, and I can't do anything with the phone. Any fix in mind? For reference, my dpi was changed, so that may be the issue, i'm not sure
bryster126 said:
I dirty flashed the deodexed version and when i booted the phone up, i keep getting com.android.systemui has stopped, and I can't do anything with the phone. Any fix in mind? For reference, my dpi was changed, so that may be the issue, i'm not sure
Click to expand...
Click to collapse
Clean install.
If you used an app to change DPI, then that's probably the issue. You need to wipe data also.
If through the build.prop, then it should've been OK.
You might be able to dirty flash the odexed as that's like factory.
Again, were taking about a factory update so it really should be a clean install.
Anyone having issues with Android Wear and ZV6? When connected to my Moto360 I get running sync loop. The only thing I haven't tried is resetting the phone and watch.
Since the update is already signed by LG, we should be able to use flashify if we have stock recovery and rooted. Is that correct? I know that I should bump TWRP, but I was holding off till lollipop. Just looking to do a dirty flash.
Sent from my LGLS990 using XDA Free mobile app
MikeDroid said:
Since the update is already signed by LG, we should be able to use flashify if we have stock recovery and rooted. Is that correct? I know that I should bump TWRP, but I was holding off till lollipop. Just looking to do a dirty flash.
Sent from my LGLS990 using XDA Free mobile app
Click to expand...
Click to collapse
I know Flashify has had issues in the past with these Roms. That's why I recommend doing it in TWRP.
If you have TWRP already why Bump it again?
Maybe I'm misunderstanding.
Edit. I wouldn't think stock recovery would flash this. It's using bits and pieces of ZV6 but not all of it.
And I think the updater-scipt would make it fail. I may be wrong though.
engine95 said:
I know Flashify has had issues in the past with these Roms. That's why I recommend doing it in TWRP.
If you have TWRP already why Bump it again?
Maybe I'm misunderstanding.
Click to expand...
Click to collapse
I'm stock recovery and rooted. Since I haven't bumped TWRP, I thought I could flashify and avoid the 5 second TWRP delay issue by holding off on a custom recovery until we get the stock rooted version of lollipop. You and autoprime have always given solid advice and as such I will take your suggestion.
Sent from my LGLS990 using XDA Free mobile app
MikeDroid said:
I'm stock recovery and rooted. Since I haven't bumped TWRP, I thought I could flashify and avoid the 5 second TWRP delay issue by holding off on a custom recovery until we get the stock rooted version of lollipop. You and autoprime have always given solid advice and as such I will take your suggestion.
Sent from my LGLS990 using XDA Free mobile app
Click to expand...
Click to collapse
And again, I'm outta Thanks, so Thank you.
The 5 sec delay I talked about has disappeared for me now. But then I've flash about a million Roms in the last few days.
Others aren't getting the delay at all.
I guess what I'm saying is you don't need to reflash Bump TWRP. It works just fine. Even if you get that slight delay. Eventually it'll go away.
Edit. Get TWRP installed now. Have some fun with whatever Rom you want to try. Personally I'm not expecting Lollipop til next year. If it happens sooner great.
engine95 said:
Get TWRP installed now. Have some fun with whatever Rom you want to try. Personally I'm not expecting Lollipop til next year. If it happens sooner great.
Click to expand...
Click to collapse
I will get TWRP and have some fun when I get back. I'm traveling right now, so I'd rather be at home if something goes awry.
Sent from my LGLS990 using XDA Free mobile app