[Q] bricked phone after trying to go back to stock - T-Mobile HTC One (M7)

Okay, so I seriously messed up my phone hardcore.
CURRENTLY: My phone would turn on to a htc logo screen. If I turn the screen off then on again, the stock version lock screen would show up. But if I unlock the screen, the white htc boot logo would show up.
- I flashed a rom through adb sideload (Guru_Reset_M7_4.19.401.11-TeHashX.zip)
- still showing that htc logo screen when unlocked
I went from using a Lollipop 5.0 unofficial build, somehow my s-off became s-on, without realizing I flashed some other roms, which got my phone not being able to detect my sim card...
Somehow I was able to adb sideload a cm11 rom and get it working again, but my sim couldn't be detected... SO I decided to be stupid and go back to stock to see if anything changed.
But I messed up badly, I messed around with almost everything.
Firmware, adb sideloading, hboot, ruu, to try to go back to stock.
Now I'm just stuck I have no idea what to do.
I'm only able to access bootloader and (twrp) recovery.
I just want to go back to stock. OR just be able to work my phone again.
This is some information:
*** UNLOCKED ***
M7_UL PVT SHIP S-OFF RH
CID-T-MOB010
HBOOT-1.55.0000
RADIO-4A.21.3263.03
OpenDSP-v.32.120.274.0909
OS-3.24.531.3
eMMC-boot 2048MB
....
_______________
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.03
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.24.531.3
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0713000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 4068mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-412e361e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
_____________________
Can some one please help me..?

Related

[Q] HTC One Bootloader Issues - Can't Recover At All

Hello,
I have an AT&T HTC One, on which I loaded Cyanogenmod's 10.2 rom. I tried to do an update to their 11.0 snapshot rom, and the system locked up during the installation. I wasn't able to recover, and now my phone is looping at boot. I can get into the bootloader screen, which shows this:
****TAMPERED****
****UNLOCKED****
M7_UL PVT SHIP S-ON RH
HBOOT-1.56.0000
RADIO-4T.24.3418.09
OpenDSP-v32.120.274.0909
OS-4.18.502.7
eMMC-boot 2048MB
Jan 28 2014, 09:32:41.0
I can get Fastboot to work, but not ADB. Here's the results from my getvar all:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4T.24.3218.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.18.502.7
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT33PW905337
(bootloader) imei: 354439054019387
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4291mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-c6bbb6d4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.044s
I have wandered all over this forum and the internet in general, downloaded multiple versions of HTC drivers, various RUU files, tried to make the S-OFF using both rumrunner and revone without any success. I've tried both USB 2.0 and USB 3.0 ports, and I've tried multiple USB cables.
When I select RECOVERY in the bootloader menu, the phone goes back to the looping on and off.
My ideal scenario would be to load the latest AT&T software load of Android 4.4.2/Sense5.5, but at this point, just getting a usable phone would be wonderful!
Does anyone have any ideas? Thank you in advance for your help!
sprezz32 said:
Hello,
I have an AT&T HTC One, on which I loaded Cyanogenmod's 10.2 rom. I tried to do an update to their 11.0 snapshot rom, and the system locked up during the installation. I wasn't able to recover, and now my phone is looping at boot. I can get into the bootloader screen, which shows this:
****TAMPERED****
****UNLOCKED****
M7_UL PVT SHIP S-ON RH
HBOOT-1.56.0000
RADIO-4T.24.3418.09
OpenDSP-v32.120.274.0909
OS-4.18.502.7
eMMC-boot 2048MB
Jan 28 2014, 09:32:41.0
I can get Fastboot to work, but not ADB. Here's the results from my getvar all:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4T.24.3218.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.18.502.7
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT33PW905337
(bootloader) imei: 354439054019387
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4291mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-c6bbb6d4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.044s
I have wandered all over this forum and the internet in general, downloaded multiple versions of HTC drivers, various RUU files, tried to make the S-OFF using both rumrunner and revone without any success. I've tried both USB 2.0 and USB 3.0 ports, and I've tried multiple USB cables.
When I select RECOVERY in the bootloader menu, the phone goes back to the looping on and off.
My ideal scenario would be to load the latest AT&T software load of Android 4.4.2/Sense5.5, but at this point, just getting a usable phone would be wonderful!
Does anyone have any ideas? Thank you in advance for your help!
Click to expand...
Click to collapse
How about this
http://forum.xda-developers.com/showthread.php?t=2676986
sprezz32 said:
Hello,
I have an AT&T HTC One, on which I loaded Cyanogenmod's 10.2 rom. I tried to do an update to their 11.0 snapshot rom, and the system locked up during the installation. I wasn't able to recover, and now my phone is looping at boot. I can get into the bootloader screen, which shows this:
****TAMPERED****
****UNLOCKED****
M7_UL PVT SHIP S-ON RH
HBOOT-1.56.0000
RADIO-4T.24.3418.09
OpenDSP-v32.120.274.0909
OS-4.18.502.7
eMMC-boot 2048MB
Jan 28 2014, 09:32:41.0
I can get Fastboot to work, but not ADB. Here's the results from my getvar all:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4T.24.3218.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.18.502.7
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT33PW905337
(bootloader) imei: 354439054019387
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4291mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-c6bbb6d4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.044s
I have wandered all over this forum and the internet in general, downloaded multiple versions of HTC drivers, various RUU files, tried to make the S-OFF using both rumrunner and revone without any success. I've tried both USB 2.0 and USB 3.0 ports, and I've tried multiple USB cables.
When I select RECOVERY in the bootloader menu, the phone goes back to the looping on and off.
My ideal scenario would be to load the latest AT&T software load of Android 4.4.2/Sense5.5, but at this point, just getting a usable phone would be wonderful!
Does anyone have any ideas? Thank you in advance for your help!
Click to expand...
Click to collapse
your going to reflash recovery then a rom
download twrp 2.6.3.3 here > http://techerrata.com/browse/twrp2/m7
then flash it in fastboot
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
then download the rom post below and sideload it to your phone
boot to recovery then
TWRP / Advanced / Sideload - swipe to sideload
From PC adb / fastboot folder
you use
adb sideload name-of-rom.zip
make sure the rom is in the same folder as adb / fastboot
mb_guy said:
How about this
http://forum.xda-developers.com/showthread.php?t=2676986
Click to expand...
Click to collapse
He can't get into recovery
Thank you!
Thank you for your help! Your instructions worked perfectly. As a side note, I noticed that I could use adb when the TWRP recovery image was loaded, but not when I was just in the bootloader screen. Anyway, thank you again for the help!

HELP: Stuck with black logo with four triangles, Get error 155 everytime i try to ruu

So the past three days i haven't had a phone or a social life. i hope i didn't brick my $600 phone. i was in recovery and i accidentally restored to an old backup and then the phone got stuck in bootloop and some reason i resorted to fastbooting my 1.26.502.12 RUU and it failed 10 times i've tried a newer ruu and an older one. but every single time i get error 155. i read about decrypting or reencrypting the ruu since s-on. but i cant figure out how to use Unruu and Ruuveal. i'm really stuck and i should have never tried updating my rom. it was stock att m7 then i put google play edition on it but i wanted kit kat.. can someone help me out of this RUU Recovery screen. i have no bootloader, no recovery, and s-on. am i ****ed?
phone says Tampered & Relocked
i can't unlock because after i fastboot the unlock code. it sends but my phone doesn't leave screen with four triangles
more info
helpmeandmyhtc said:
So the past three days i haven't had a phone or a social life. i hope i didn't brick my $600 phone. i was in recovery and i accidentally restored to an old backup and then the phone got stuck in bootloop and some reason i resorted to fastbooting my 1.26.502.12 RUU and it failed 10 times i've tried a newer ruu and an older one. but every single time i get error 155. i read about decrypting or reencrypting the ruu since s-on. but i cant figure out how to use Unruu and Ruuveal. i'm really stuck and i should have never tried updating my rom. it was stock att m7 then i put google play edition on it but i wanted kit kat.. can someone help me out of this RUU Recovery screen. i have no bootloader, no recovery, and s-on. am i ****ed?
phone says Tampered & Relocked
i can't unlock because after i fastboot the unlock code. it sends but my phone doesn't leave screen with four triangles
Click to expand...
Click to collapse
C:\Users\Luke\Downloads\adt-bundle-windows-x86_64-20140321\platf
ot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.17.3250.20
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.502.12
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT35FW907556
(bootloader) imei: 354439055094108
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4266mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.059s
helpmeandmyhtc said:
C:\Users\Luke\Downloads\adt-bundle-windows-x86_64-20140321\platf
ot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.17.3250.20
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.502.12
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT35FW907556
(bootloader) imei: 354439055094108
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4266mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.059s
Click to expand...
Click to collapse
Try the 1.26.502.15 RUU here
http://www.androidruu.com/getdownlo....20_10.40.1150.04_release_326691_signed_2.exe
Whoo hoo 2300 posts

[Q] I'm an Idiot, please help

I'll keep it short.
I had my bootloader unlocked and I had S-OFF. I flashed a stock rom form my tmobile m7. Then I thought if I relock the bootloader and gained S-ON the red text would disappear when it booted. I'm trying to sell it.
Flashed stock rom, flashed stock recovery, gained S-ON and relocked my bootloader.
Now when it reboots it keeps booting straight to the bootloader and thats it. If I reboot to recovery it stays on that screen for about 5mins and then reboots to the bootloader. At the top of my bootloader screen I have:
Tampered in black
Relocked in pink
Security Warning in pink
Here some more info for you:
C:\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.15
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT35NW909106
(bootloader) imei: 355972054730362
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0713000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 4240mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.062s
I feel like an idoit doing this. Please tell me there is hope to undo this mess. Thanks.
Do a Google search for custom HBoot on your phone. This can be done easily on my Sprint phone - if you look at the Sprint HTC One forums, a user there has an HBoot flasher program that is awesome. Rootlinux is his name - he may be able to help.
Sent from my HTCONE using Tapatalk
for your personal security please zero out these lines
(bootloader) serialno: HT35xxxxxxxxx
(bootloader) imei: 35xxxxxxxxxxxxxxx

[Q] HTC One problem, Stuck in cyanogen boot loop, s-on, no RUU available

*Sorry for bad English*
So i have my htc one (m7), and i was trying to get it back to stock htc sense, because is was on cyanogenmod and i didn't really like it. i have used the tutorial from htc-one.wonderhowto .com ... I followed all the steps (relocked bootloader and downloaded HTC program), but the RUU wasn't compatible, i didn't know that at the time. So I was searching for another RUU, but I coudn't find a one to fit my device.
This is what *fastboot getvar all* gives me:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH35WW909931
(bootloader) imei: XXXXXXXXXXXXXXX
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 4315mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
As you can see, i currently have s-on, and i can't find a proper RUU. So i tryed if there was a way to set my s-on to s-off. but i can't do that with rumrunner, since i am not able to uncheck *fastboot* in android settings, because i can't boot. Note: i have Clockworkmod Recovery installed. I live in the Netherlands.
Can anyone help me with this? i'm new to all this info so i dont know if there is an other way to simply install the stock htc rom.

Need help going back to Stock from GPE Lollipop

I relocked my bootloader. Turned S- ON and ran the correct RUU.exe file that I downloaded straight from HTC's website and I always get stuck during the update process(technically a downgrade I suppose) The RUU.exe always comes back with error 155 UNKNOWN ERROR. Not sure what I'm doing wrong. I ran ADB and checked before I ran the RUU that my PC does in fact recognize it( both while on my homescreen and FASTBOOT mode). Please I need help!
ok so I unlocked my bootloader again via HTCDev. But I can't for the life of me get S-OFF again. My HBOOT is 1.54. I am on the OFFICIAL GPE ROM. Help please.
vampsandbats said:
ok so I unlocked my bootloader again via HTCDev. But I can't for the life of me get S-OFF again. My HBOOT is 1.54. I am on the OFFICIAL GPE ROM. Help please.
Click to expand...
Click to collapse
Post a fastboot getvar all except remove your imei and serialno! If what I suspect is true, you changed your MID and CID to the Google MID & CID. If you did that, then the T-Mobile RUU will not run since it is the wrong MID & CID. When you went back to S-ON you made it impossible to change your MID & CID back to T-Mobile. As far as S-OFF is concern you might try Sunshine S-OFF.
majmoz said:
Post a fastboot getvar all except remove your imei and serialno! If what I suspect is true, you changed your MID and CID to the Google MID & CID. If you did that, then the T-Mobile RUU will not run since it is the wrong MID & CID. When you went back to S-ON you made it impossible to change your MID & CID back to T-Mobile. As far as S-OFF is concern you might try Sunshine S-OFF.
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4T.30.3218.21
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.11.1700.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0713000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 3992mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e135dbf9
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I appreciate your help.
vampsandbats said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4T.30.3218.21
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.11.1700.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0713000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 3992mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e135dbf9
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I appreciate your help.
Click to expand...
Click to collapse
Let try an older RUU 5.14.531.11
Place phone in FASTBOOT USB
Lock your bootloader if it is not already locked
Run the RUU from your computer
If it fails post the error
If successful then
Try S-OFF with Sunshine
RUU 6.10.531.9
RUU 6.10.531.10
DUDE THANK YOU SO MUCH. I KNOW ITS LIKE 4 months ago but thank you so much. the old RUU did the trick and I got back to stock.

Categories

Resources