[q] help!! S5 stuck at white t-mobile screen - T-Mobile Samsung Galaxy S 5

My T-mobile galaxy 5s is stuck at the boot screen. I am rooted with a stock rom, xposed framework, and right after I installed the force LTE only module and rebooted it wont boot in anymore. PLEASE HELP! I didn't have a custom recovery flashed(yes I am aware that I am a retard for not flashing one) Any ideas, please help.

Flash back to stock with Odin and start over? Not much you can do since you don't have a custom recovery...
Sent from my SM-G900T using Tapatalk

Ditto other than seeing if recovery will load either and trying a master reset.
Probably will need to Odin though

All hail the mighty 0din

Odin! Learn it, love it, live it! ;->

Related

Flashing back to vodafone stock rom from resurrection v.9.2

Hello guys,
I must admit I am an absolute noob a bit out of my depth and panicking a little bit now. I successfully rooted and flashed my phone with a custom rom, the resurrection ics v9.2 however I wanted to go back to stock vodafone rom. So i downloaded BUKE1 vodafone firmware and flashed it using ODIN. Now my phone is stuck in a bootloop with the galaxy S II logo repeatedly appearing. I have just left it as is as I am now too scared to do anything :/
Any advice on what I can do? I know you guys have been over this a million times but I am freaking out.
I have read the boot loop thread above and it says to flash a stock rom using odin but that is what I had already done...
Any help would be greatly appreciated.
Jake
Try wiping all possible things in recovery.
And don't worry, atleast some1 pro will help you to get your phone to boot, also can you get to recovery and download mode
Sent from my sgs2 running cm9 using xda app
Hey thanks for the quick reply, I can get to recovery mode definitely. I just went in and wiped user data / factory reset option. Do you think I should try flashing a different stock vodafone rom?
Ok after wiping user data it now appears to be fine. I'm sorry for wasting your time.
it is recommended that you wipe everything after flashing in order to avoid boot loops or similar errors
glad it worked out for ya

Bricked, flashing stock rom doesn't work

Hey guys, I'm hoping someone can help me out. I've tried searching the forums and using different methods to recover it, but none have worked so far.
SO I flashed the ICS Domination theme over Diet ICS rom, stuff was continuously force closing, so I factory wiped with the intention of re-flashing just the rom... after a reset the phone was stuck on the samsung boot screen.
I've tried using Odin to load the stock Rogers rom, it says it worked, but trying to boot the phone up its stuck on the samsung boot screen.
Am I missing something? Is there anything you guys can suggest I try??
EDIT: Oops, wrong forum, meant to put this in the AT&T forum
Snap my phone is stuck on samsung screen for awhile now, it's not doing anything at all
Wipe everything in recovery and flash a rom from either recovery or odin..
Sent from my GT-I9300 using xda premium

Galaxy S2 won't boot passed the 'S' start screen

Hi guys,
My phone has just presented with the above problem. When I switch it on it won't boot passed the start up screen with the big 'S' and 'Samsung Galaxy S II' below it.
Can anyone offer a reason why this might have happened and more importantly a solution?
Many thanks
Anyone any ideas?
Thanks
if you tried to flash a custom rom or kernel and i suppose that something gone wrong and the phone bootlooped/bricked.try to flash another rom or go back to stock rom.
Thank me If I helped
Seems you have installed a custom rom without paying attention to the process... Do you have Cwm recovery??
Hit thanks on help
Using XDA premium through A5

[Q] Jellybean Softbrick help!

Hi,
After some assistance if possible.
I have the international version of GS2. Purchased in the UK.
Yesterday flashed the new Jellybean ROM through ODIN as found here: http://forum.xda-developers.com/showthread.php?t=2113088
Worked fine for one day then phone froze this morning. Did a battery pull and on reboot stayed on the Samsung logo. Rebooted many times but still stuck at the same point. Reflashed the Rom through ODIN again but still stuck at Samsung logo.
I can access download mode, but not any kind of recovery.
From reading on here, I think the NAND(?) may be corrupted, but not sure, leading to the soft brick. Can anyone advise what I need to flash to get the phone up and running again?
Any help appreciated.
Mario.
mario999 said:
Hi,
After some assistance if possible.
I have the international version of GS2. Purchased in the UK.
Yesterday flashed the new Jellybean ROM through ODIN as found here: http://forum.xda-developers.com/showthread.php?t=2113088
Worked fine for one day then phone froze this morning. Did a battery pull and on reboot stayed on the Samsung logo. Rebooted many times but still stuck at the same point. Reflashed the Rom through ODIN again but still stuck at Samsung logo.
I can access download mode, but not any kind of recovery.
From reading on here, I think the NAND(?) may be corrupted, but not sure, leading to the soft brick. Can anyone advise what I need to flash to get the phone up and running again?
Any help appreciated.
Mario.
Click to expand...
Click to collapse
Try flashing a kernel like siyah or Dorimanx in download mood. Then reboot into recovery and flash a JB custom rom
That did it. Thanks.
Sent from my GT-I9100 using Tapatalk 2
mario999 said:
That did it. Thanks.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Please use the thanks button instead of saying thanks

[Q] Possible brick after CWM recovery update.

Here goes, hopefully someone can help!
Ive installed a fair few roms on my phone and never had any issue, maybe this explains the complacency.
After updating to CWM recovery -6.0.4.7 I get stuck on my bootscreen, only seeing "Samsung galaxy I9100P" , ive been putting I9100 roms on it and losing NFC functionality for a while.
I went to update to the newest CM-11 nightly and read I needed to update CWM-recovery first. So did that, rebooted phone as instructed after installing new CWMr and nothing. Just stuck on I9100 screen.
No way to get into recovery mode, the only bright side I have found is I can boot into ODIN download mode. So what would be my next steps anyone?
Flash stock rom. or flash a kernel to get a working recovery bk with odin.
Sent from my GT-I9300 using xda premium
andrewwright said:
Flash stock rom. or flash a kernel to get a working recovery bk with odin.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
From a dig through the forums it sounds like NAND rw corruption?
I wouldn't be calling it that just yet. Unless you'd like to pay for a motherboard replacement ? Most of these are recoverable.
Used ODIN and flashed a new kernel, still on the boot screen, except now I have the yellow exclamation mark. Now to, Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.. this day is not going well..
Fingers crossed, flashed 3 or 4 kernels before one worked and allowed me into recovery mode. Trying to restore back to my backup from this morning. Heres hoping! :good:
Worked perfectly, the first thing I did was retry the initial task which was what got me stuck, currently waiting on CM-11's initial boot up after a successful install Thanks for the calming responses!

Categories

Resources