Q&A for [ROM] [Unofficial] [Bliss Pop] [5.0.1 Lollipop] 12-3-14 - [vs985]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] [Unofficial] [Bliss Pop] [5.0.1 Lollipop] 12-3-14 - [vs985]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
TWRP vs Phil
I've flashed 3 different releases of 5.0 using TWRP without issue. I initially flashed CM11 and dirty flashed CM12 and everything but video works.
I am having a problem with the Dialer. When I try to type a number in I get a FC when I hit the CALL button. Do you know what might be causing this?
EvilishBob said:
I am having a problem with the Dialer. When I try to type a number in I get a FC when I hit the CALL button. Do you know what might be causing this?
Click to expand...
Click to collapse
New build is up which fixes the issue
oadam11 said:
New build is up which fixes the issue
Click to expand...
Click to collapse
Thank man, you rock! Other than that issue (which unfortunately defeated the whole "phone" thing ), the ROM was amazing. As a side note, I was also getting random system FC's intermittently, which basically soft rebooted the launcher. Though this was manageable, as it was pretty infrequent.
einstein812 said:
I've flashed 3 different releases of 5.0 using TWRP without issue. I initially flashed CM11 and dirty flashed CM12 and everything but video works.
Click to expand...
Click to collapse
Did you use TWRP 2.8.0?
Anyone completely almost brick flashing Bliss Pop 5.0 Lollipop Rom?
Last night I flashed the 12-3 version of the ROM and my G3 kept throwing the error message "Unfortunately setup wizard has stopped working" over and over and over again. Then occasionally it would say "AOSP Keyboard has stopped working". There was no launcher present either-just a blank screen with the Bliss logo.
I could swipe down and get to the menus -but the Wifi and mobile networks weren't connecting.
Trying to reboot manually into TWRP recovery didn't work either-kept rebooting into the rom. I had to ADB sideload to get it to reboot into recovery, then restore my nandroid backup.
I used the Bliss Gapps file provided, although they weren't for 5.0 according to the download, still 4.4.
Could have been a bad flash I guess, but wanted to see if anyone else had that issue.
help
tried flashing the rom dunno what happend phone powered off and now its saying unfrotunatley setup wizard has stopped then unfortunatley android keyboard has stop im trying to boot into recovery mode and it will not for the life of me go into revocery mode plase help..
DCSGS3Guy said:
Last night I flashed the 12-3 version of the ROM and my G3 kept...
I used the Bliss Gapps file provided, although they weren't for 5.0 according to the download, still 4.4.
Could have been a bad flash I guess, but wanted to see if anyone else had that issue.
Click to expand...
Click to collapse
Using 4.4 gapps with a 5.0 ROM will do that. Wipe and reflash with 5m0 gapps and see if that works
Sent from my VS985 4G using XDA Free mobile app
goldsmitht said:
Using 4.4 gapps with a 5.0 ROM will do that. Wipe and reflash with 5m0 gapps and see if that works
Sent from my VS985 4G using XDA Free mobile app
Click to expand...
Click to collapse
Yep. This is most likely the issue. I'll update the op for the lollipop builds to specify that lollipop gapps must be used for it. The gapps that are posted are only for bliss Stalk (kitkat)
help
shadiguy1 said:
tried flashing the rom dunno what happend phone powered off and now its saying unfrotunatley setup wizard has stopped then unfortunatley android keyboard has stop im trying to boot into recovery mode and it will not for the life of me go into revocery mode plase help..
Click to expand...
Click to collapse
Solution for me: Power on by holding power button + volume down, when you see lg logo, release both and then press and hold both again. When boot animation starts, just continue holding and it will boot into recovery.
Question
I successfully flashed this rom with the 5.0 gapps. After playing around with it a bit, I cannot seem to find any of the system apps mentioned in the OP. Should I install again? Also, does the quick circle case work with this rom or other non-stock (LG) roms?
Thank you and the rom is awesome,
Daniel
dkmar_lg said:
I successfully flashed this rom with the 5.0 gapps. After playing around with it a bit, I cannot seem to find any of the system apps mentioned in the OP. Should I install again? Also, does the quick circle case work with this rom or other non-stock (LG) roms?
Thank you and the rom is awesome,
Daniel
Click to expand...
Click to collapse
The system apps mentioned are for blissStalk (the kitkat version). The lollipop build doesn't have all of those apps.
The quick circle case doesn't work on any non stock based ROMs unfortunately. I have the case as well
Advanced Calling
Does this ROM support verizon's new Advanced Calling feature?
Video Codec
When I am using this ROM viewing videos from snapchat don't work. Even of it's my own. Is there a codec I need to download or is this a bug in the ROM?
Seems to happen with most of these. I think its a cm12 issue. I can view but not take vids :/
Dev
In the main thread there was a post for a dev. What would entail doing that? I might be able to help out this ROM, I've been interested in getting into this for a while and I've flashed so much I figure I should give back. Please let me know if you're looking/willing
I'm not sure how I'm missing it but I don't see nav bar color options in bliss interface anywhere... Any help?
Changelog?
If it's not too much to ask, could we get a changelog with new releases?
This is for anyone who can help,is there any way to get the heads up display working on a stock ROM would love to have it so my games wouldn't be interrupted
Related
[Q&A] [ROM][HOX+ Internat. enrc2b][CM-AOKP] CarbonRom UNOFFICIAL JB 4.3 && KK 4.4.4
Q&A for [ROM][HOX+ Internat. enrc2b][CM-AOKP] CarbonRom UNOFFICIAL JB 4.3 && KK 4.4.4
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][HOX+ Internat. enrc2b][CM-AOKP] CarbonRom UNOFFICIAL JB 4.3 && KK 4.4.4. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
The Latest build of the rom is giving network issues, Cellular network isnt available, Wifi doesn,t turn on.. Other than that everything is fine .
TNT242 said:
The Latest build of the rom is giving network issues, Cellular network isnt available, Wifi doesn,t turn on.. Other than that everything is fine .
Click to expand...
Click to collapse
flash the boot.img
Lloir said:
flash the boot.img
Click to expand...
Click to collapse
Thanks for the quick reply... Did the work, everything seems to work flawlessly now
TNT242 said:
Thanks for the quick reply... Did the work, everything seems to work flawlessly now
Click to expand...
Click to collapse
IS this ROM Stable.
shivangshukla said:
IS this ROM Stable.
Click to expand...
Click to collapse
Stable enough for day to day use
Loir Im getting a ui fc whenever I try to long press a notification in d status bar. Cant enable headsup notifications
TNT242 said:
Stable enough for day to day use
Loir Im getting a ui fc whenever I try to long press a notification in d status bar. Cant enable headsup notifications
Click to expand...
Click to collapse
Looks like they pulled in a CM change. It's @PippoX3's rom, but I'll try and find the CM commit for him to merge up. I'm slightly busy trying to make sure all the rom's are stable with the kernel changes atm, and trying to get omni in a half decent state.
108
Okay thanks anyway
TNT242 said:
Stable enough for day to day use
Loir Im getting a ui fc whenever I try to long press a notification in d status bar. Cant enable headsup notifications
Click to expand...
Click to collapse
The SystemUI FC on longpress notif it's an issue related to old commit. Now it's solved. Check the latest build on hosting folder. Thanks.
Thank You so much for your work. Everything seems fine to me till now ! :angel:
Got bootloop after using nikers elite kernel for a few days, the phone goes off and starts rebooting again. I guess itz some kernel issue . wud fastbooting boot.img help me get back to d roms kernel? ? Thanks
aicp 6.0 is lolipop? i download gapps-kk-20140606-signed from carbon web, is okay if i flash it with aicp 6.0?
Open Accessory
While playing with a RasPi and my HOX+ I noticed that the system seems to only support AOA 1.0 . Even though AOA 2.0 is already 4 years old (I have first seen it in the 2011 Accessory Kit).
Is this a bug or missing config ?
I was building a dock for my Android devices and was hoping to use the AOA to stream audio via USB.
I am getting "Android System UI stopped working" once or twice a day since I flashed this ROM. Is there anyone else with this problem and has perhaps some solution how to get rid of it? Everything else works perfectly...
Phone overheat -> Reboot -> Deletes apps and changes language
Hi! I've been running this ROM (CARBON-KK-NIGHTLY-20150328-1909-enrc2b) for a day or so and yesterday was a first time outside using data connection.
My battery was around 19% percent and while using apps like BBM and Tinder, the phone stopped responding, shut down and when I turned it back on, recently installed apps were gone, some Whatsapp chatlogs too, and my language had changed from Spanish to English.
Should I repeat a fresh install of the ROM? What could have caused this?
Thanks a lot!
ikarikutu said:
Hi! I've been running this ROM (CARBON-KK-NIGHTLY-20150328-1909-enrc2b) for a day or so and yesterday was a first time outside using data connection.
My battery was around 19% percent and while using apps like BBM and Tinder, the phone stopped responding, shut down and when I turned it back on, recently installed apps were gone, some Whatsapp chatlogs too, and my language had changed from Spanish to English.
Should I repeat a fresh install of the ROM? What could have caused this?
Thanks a lot!
Click to expand...
Click to collapse
Carbon is no longer being maintained + it has a massive amount of security issues due to no longer being maintained, I would suggest a different rom.
*Cries*
Lloir said:
Carbon is no longer being maintained + it has a massive amount of security issues due to no longer being maintained, I would suggest a different rom.
Click to expand...
Click to collapse
Could you recommend any? I come from Pure AOSP (with I understand you built) but it was a nightmare Snapchat wouldn't work and general performance was nerve wracking, specially incoming calls had problems.
Thanks aloooot for your help on this.
ikarikutu said:
Could you recommend any? I come from Pure AOSP (with I understand you built) but it was a nightmare Snapchat wouldn't work and general performance was nerve wracking, specially incoming calls had problems.
Thanks aloooot for your help on this.
Click to expand...
Click to collapse
The most secure rom is CM12.1 but that has it's own issues.....take a read on the thread and decide.
exactly as Lloir said:- CM12.1 b is indeed very stable , he made a very good and secure ROM( CM12.1 b). why don't you try it out and see for yourself?
Q&A for [ROM][5.0][Lollipop][Official] NamelessROM 2.0 [ALPHA]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.0][Lollipop][Official] NamelessROM 2.0 [ALPHA]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Anyone managed to dual boot it ?
Syden said:
Anyone managed to dual boot it ?
Click to expand...
Click to collapse
@Lukijs did
Syden said:
Anyone managed to dual boot it ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=56742439&postcount=41
I think this ROM is for I9300 and not for the I9305
Lukijs said:
http://forum.xda-developers.com/showpost.php?p=56742439&postcount=41
Click to expand...
Click to collapse
OK, can you please point me to a guide to dual booting. Did you put this ROM as 1st rom or 2nd?
error during instalation
Cannot mount /data device or data are busy ...
Help..
prabhjots said:
OK, can you please point me to a guide to dual booting. Did you put this ROM as 1st rom or 2nd?
Click to expand...
Click to collapse
As you can see in screens, kitkat is 1st and Lollipop is 2nd rom ..go to arter97 kernels thread and check last 2 pages I think, there was guide
rom issue
hi
if i flash rom from recovery, phone always restart and not booting
but if i flash arter kernel phone boots
but statusbar now showing
wifi not connecting
sd card not working
thanks
few problems
There is problem while connecting to a wifi, its not getting connected....
using mobile data which shows connected but unable to load either in web briwser or play store....
but the rom is awesome great work...
fix the issues soon...
---------- Post added at 11:37 AM ---------- Previous post was at 11:32 AM ----------
pouya06 said:
hi
if i flash rom from recover phone always restart and not booting
but if i flash arter kernel phone boots
but statusbar now showing
wifi not connecting
sd card not working
thanks
Click to expand...
Click to collapse
try with stock kernel it will take 5-10 minutes to boot but everything working except networks
Well after reading all the posts I decided to test it. First of all, I'm no developer. Here's what I did;
1. Did "Wipe to install a new ROM" from philz
2. Installed ROM
3. Installed Gapps.
That's pretty much it for everyone who keeps asking how to install it -_- and the first boot took about 10 minutes for some reason.
As for bugs, I still haven't experienced a single issue except for the keyboard problem which I fixed by enabling hardware keyboard from settings. Everything works smooth as silk :')
Just sharing my results because of all the negative posts..
Great work devs!
I tried to install that rom (which looks amazing by the way) but when I reboot my device after install it just shows the bubbles and restarts.
I replaced a recovery (from ClockWorkMod to Philz) but it still exists.
what can I do?
Thanks.
mohitc6 said:
There is problem while connecting to a wifi, its not getting connected....
using mobile data which shows connected but unable to load either in web briwser or play store....
but the rom is awesome great work...
fix the issues soon...
---------- Post added at 11:37 AM ---------- Previous post was at 11:32 AM ----------
try with stock kernel it will take 5-10 minutes to boot but everything working except networks
Click to expand...
Click to collapse
i do this , but not work at all!
phone just shows the bubbles and restarts
found a slove, download arter97 kernel (5.0 version) and flash it after installing the rom and gapps.
TheAia said:
found a slove, download arter97 kernel (5.0 version) and flash it after installing the rom and gapps.
Click to expand...
Click to collapse
That works too but I don't know I didn't have to flash his kernel. I just installed the ROM and the default kernel it came with :/ Glad it's working for you :3
Still can't have the Wi-Fi working.
Sent from my GT-I9300 using XDA Free mobile app
I gave up trying after my battery became near empty from 90%. I am getting home screen without status bar and lockscreen if i flash with arter's kernel otherwise just bubbles and bootloop. Few managed to getting the rom work, Does previous rom and recovery(i am using latest twrp) have anything to do with this?
problem
hi what can i do i have boot loop in boot animation?
Lukijs said:
http://forum.xda-developers.com/showpost.php?p=56742439&postcount=41
Click to expand...
Click to collapse
Hi,
Can I dual boot this with s5 mini v6.1 (TouchWiz android 4.4 4) using arter kernel ?
When flashing I get error sth like : cannot mount ext4 .... device or file busy .
Q&A for [ROM][5.0.2][OFFICIAL] AICP for Nexus 9 (flounder) WiFi Only
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.0.2][OFFICIAL] AICP for Nexus 9 (flounder) WiFi Only. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
rootcid said:
That's what I used all good for me.
Click to expand...
Click to collapse
I found that using Titanium Backup to force remove "Google app" then reinstall from the Play Store worked a treat. Haven't had any FC's since.
I found a bug, my battery status is shown incorrectly, it never reports as full and real battery status can only be seen through moonreader app.
Perfect for now!
Hope a new version release soon
LAGGY
my tablet is lagging and overheating any fix
darkdevu said:
my tablet is lagging and overheating any fix
Click to expand...
Click to collapse
What build are you running? Any custom mods of kernels? Any overclocking or underclocking?
Performance settings
Hi all
First of all i wanted to thank OP and the team for the great work on this rom.
I use it on my Nexus 5 and my Nexus 9.
I have read thru all the pages here and i might have missed but i couldnt see if anyone have issues
with the Performance settings.
It works on my Nexus 5 but setting the mode Battery Saving/Balanced/High Performance doesnt stay thru a reboot.
On my Nexus 9 when i enter the Performance option under Settings i get only a white blank screen.
No options at all. This has been there since last few nightlies. At least last 4 releases. I also tried the stable release from 0210.
Same issue there. Only white screen shows. Anyone have this working?
I always do complete wipe and format all before installing rom clean.
No custom rom or any other mods than GApps Minimal Edition 2015-03-08 GPS 430 [Universal DPI, armeabi-v7a CPU]
Cheers
[email protected] said:
Hi all
First of all i wanted to thank OP and the team for the great work on this rom.
I use it on my Nexus 5 and my Nexus 9.
I have read thru all the pages here and i might have missed but i couldnt see if anyone have issues
with the Performance settings.
It works on my Nexus 5 but setting the mode Battery Saving/Balanced/High Performance doesnt stay thru a reboot.
On my Nexus 9 when i enter the Performance option under Settings i get only a white blank screen.
No options at all. This has been there since last few nightlies. At least last 4 releases. I also tried the stable release from 0210.
Same issue there. Only white screen shows. Anyone have this working?
I always do complete wipe and format all before installing rom clean.
No custom rom or any other mods than GApps Minimal Edition 2015-03-08 GPS 430 [Universal DPI, armeabi-v7a CPU]
Cheers
Click to expand...
Click to collapse
Enable development settings by clicking he build number in "About Tablet" a few times.
Hi,
How can I install Google now launcher? When I download it from play store, it says that I should go to settings and clear defaults for slim launcher. But the option to clear defaults is grey, son that I can't clear the defaults...
Any help would be much appreciated!
Thanks,
Joern
joshuabg said:
Enable development settings by clicking he build number in "About Tablet" a few times.
Click to expand...
Click to collapse
Thanks joshuabg. It worked like a charm.
Never tought of enabling the dev settings since they are visible as default.
Now lets see if the settings stick thru a reboot.
Hi,
the synchronization of my google calender fails. I'm on the latest nightly and deleted my google account and added it again. Everything syncs except the calender. Any advice to fix that?
Thanks,
Joern
Joern85 said:
Hi,
the synchronization of my google calender fails. I'm on the latest nightly and deleted my google account and added it again. Everything syncs except the calender. Any advice to fix that?
Thanks,
Joern
Click to expand...
Click to collapse
you installed google calendar ?
LorD ClockaN said:
you installed google calendar ?
Click to expand...
Click to collapse
Yes. But i had to reinstall it to fix the problem.
Now i've got another issue: sometimes the internet connection stops working. My wifi seems to be connected with full reception, but webpages or apps aren't receiving any data. I have to reconnect my wifi to fix that, but after a while the problem appears again
Need help. Have screen unlock issue with this ROM not on stock ROM.
When I try to unlock the screen, I push power button or double tape screen to wake up. I enter my password and screen go automatically off and don't can again. I have to forced power off device to unlock screen again and get access again. See YouTube video belong
http://youtu.be/K84rQHEO6NM
Does SaberMod ROM be dirty flash on AICP official ROM ?
roulyz said:
Does SaberMod ROM be dirty flash on AICP official ROM ?
Click to expand...
Click to collapse
For me it didn't work...
roulyz said:
Does SaberMod ROM be dirty flash on AICP official ROM ?
Click to expand...
Click to collapse
I try too dirty flash SaberMod on AICP and it work fine... And I don't got any screen unlock problems again
roulyz said:
I try too dirty flash SaberMod on AICP and it work fine... And I don't got any screen unlock problems again
Click to expand...
Click to collapse
Is everything working fine now?
joshuabg said:
Is everything working fine now?
Click to expand...
Click to collapse
Yeah, it works fine with Sabermod but I don't know why in battery tab, WIFI still running event when it's disable.
Please how to flash Aicp 9 saberMod? What is the process? I try clean install by wipe cache and davik and data. But I got this message: Android system: there is an internal problems with you devices. Contact your manufacturer for detail.
Need help tks....
Q&A for [ROM+KERNEL] Uber CM-12.1---MOTO E [AK Kernel] [GCC 4.8 & 4.8]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM+KERNEL] Uber CM-12.1---MOTO E [AK Kernel] [GCC 4.8 & 4.8]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Play Store FC loop with Slim Mini Gapps.
darshan_dex said:
Play Store FC loop with Slim Mini Gapps.
Click to expand...
Click to collapse
Don't use slim gapps its meant to use with slimroms only i think
Adarsh1998 said:
Don't use slim gapps its meant to use with slimroms only i think
Click to expand...
Click to collapse
Yupp! using with normal gapps now...working perfect!
Adarsh1998 said:
Don't use slim gapps its meant to use with slimroms only i think
Click to expand...
Click to collapse
Why not? That's what I use w/ this ROM on Bacon, and that's what I suggest that people use! What's the issue?
Sent from my Oneplus One using Tapatalk
link Fallen
iyajid said:
link Fallen
Click to expand...
Click to collapse
Fixed.
setup wizard fc
After first boot getting fc on setup wizard.. Can't even skip the step
camper7 said:
After first boot getting fc on setup wizard.. Can't even skip the step
Click to expand...
Click to collapse
You are the first person reporting this. I'm about to push an update right now. Try again with it. Make sure that you do CLEAN flash.
Noob question
Will it be a problem if i clean install it on Kitkat bootloader?
I'm on stock kitkat 4.4.4 unlocked Bootloader
will it cause stucking at bootanimation?
deep1993 said:
Will it be a problem if i clean install it on Kitkat bootloader?
I'm on stock kitkat 4.4.4 unlocked Bootloader
will it cause stucking at bootanimation?
Click to expand...
Click to collapse
I'm not absolutely sure. I don't own this device. Make a backup and give it a try. You can always flash back to your backup/flash the new bootloader. Is there a reason that you don't wanna upgrade the bootloader?
deep1993 said:
Will it be a problem if i clean install it on Kitkat bootloader?
I'm on stock kitkat 4.4.4 unlocked Bootloader
will it cause stucking at bootanimation?
Click to expand...
Click to collapse
many people were having bootloop problem installing any lollipop rom on kitkat bootloader. You can try but if you get bootloop or stuck at bootanimation, try installing cm11 stable build then flash this rom over it(by wiping dalvik cache, cache and data).
Thanks guyez
installing over cm11 will surely solve the issue ?
or is there any way to update bootloader ?
deep1993 said:
Thanks guyez
installing over cm11 will surely solve the issue ?
or is there any way to update bootloader ?
Click to expand...
Click to collapse
only way to update bootloader is to install 5.0.2 soak test zip.You can search in forum
You can't just flash the bootloader with fastboot?
Sent from my Oneplus One using Tapatalk
RobbieL811 r u looking to hide signal icons in wifi
here solution: http://forum.xda-developers.com/showthread.php?t=3086501
this rom suit for moto e xt1022??
Adarsh1998 said:
RobbieL811 r u looking to hide signal icons in wifi
here solution: http://forum.xda-developers.com/showthread.php?t=3086501
Click to expand...
Click to collapse
Yes. I was looking for this! I made a post in his thread. I hope that he has a commit for it.
Stuck in Bootloop
Stuck in boot logo with cm icon and circle flashing in the behind. Please help
I wiped all partitions then installed the last build.
It seems that the new option to hide the network activity arrows doesn't do anything, enven after a reboot.
Everything else works perfectly, thank you for this excellent rom.
Q&A for [ROM][5.0.2][12-04-2015] SlimSaber [UNOFFICIAL SlimLP]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.0.2][12-04-2015] SlimSaber [UNOFFICIAL SlimLP]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
nice :good:
Some time ago i was using SlimSaberKat by @fusionjack and later CM11 by @Markox89 as a daily driver. But then the demand for lollopop pushed me forward to leave those great roms.
Currently I am on Omni 5.1 and it is much smoother than 5.0 . SlimLP 5.1 is imo only a matter of time and patience. See this post on slim's google+-page: https://plus.google.com/+SlimromsNet/posts/ffGnX4gXrbN
I will try it when it's ready
when will you go for 5.1
Error while restoring /system
Hello. I stuck on logo and followed the steps to fix it. But now i cant restore my files. Any fix ?
ivelin123 said:
Hello. I stuck on logo and followed the steps to fix it. But now i cant restore my files. Any fix ?
Click to expand...
Click to collapse
Screenshot needed please. What is the actual error displayed when restoring /system? Perhaps you could flash back to android 4.4.4
---------- Post added at 07:27 PM ---------- Previous post was at 07:24 PM ----------
batestota said:
when will you go for 5.1
Click to expand...
Click to collapse
Just give slimroms some time. They haven't updated the base code for a while now (and are still working on 5.1 lollipop), and they are still trying to fix many current issues with slimLP alpha.
The rom not start. I whait 15 minute on the logo, but nothing.
I have use all clean and downloading the rom 2 times..
Memory leak is fixed in latest version?
oczkers said:
Memory leak is fixed in latest version?
Click to expand...
Click to collapse
No, not yet.
TeamViewer
warrior1208,
This rom is awesome, i have one problem, i can´t have acess to TeamViewer Addon, can someone explain to me how i can this addon working to have acess to my cellphone screen?
Thanks.
Regard's,
JASSS
Bug
Enabled device heats up during charging. How to solve this problem?
Best ROM so far
I've been using all of the LP roms from xda section and all of them are still unstable(SlimLP also) but I didn't have any issues with Slimsaber.
Come from JB
Hello my current rom is JB . What do I need to instal before your rom ?
keyboard crashed
Hi!
I migrated from SlimSaber 4.4.4 3.0.80SlimKernel+ (the perfect ROM!) and resized partions (4,5+9). Wiped... wiped..wiped. Clean installation.
Keyboard AOSP doesn't work. TRWP was loosed.
What's wrong?
Thank you.
vitfain said:
Hello my current rom is JB . What do I need to instal before your rom ?
Click to expand...
Click to collapse
You need to have a kitkat compatible recovery, and just follow the steps in the OP. And of course root access
uno mas said:
Hi!
I migrated from SlimSaber 4.4.4 3.0.80SlimKernel+ (the perfect ROM!) and resized partions (4,5+9). Wiped... wiped..wiped. Clean installation.
Keyboard AOSP doesn't work. TRWP was loosed.
What's wrong?
Thank you.
Click to expand...
Click to collapse
I have had this issue once or twice. You can download another keyboard .apk(from market) and put it into /system/app manually using something like root explorer. You will need to set the permissions doing it this way. Or you could try doing a full wipe and reflashing the rom.
The recovery is in the kernel that comes with the rom. If you want TWRP back you would have to flash a custom kernel such as apolo.
PUK
Newest build, but PUK bug is still here. At least for me.
Every time i restart my phone it says sim card is locked. I enter PIN, then the phone asks to enter PUK, after entering PUK it lets me to enter new pin code, which is kind of annoying. Any ideas why this bug still occurs?
Nice ROM!
smason said:
Nice ROM!
Click to expand...
Click to collapse
Thanks! I'll update to 5.1.1 on 6th of June!
Regards!
Xposed will work on 6th build?
@warrior1208 will xposed work on the 6th june build? Because I'm using SlimLP for now because xposed works on it but I want to change to SlimSaberLP but my only concern is if xposed working or not?
akiwiz said:
@warrior1208 will xposed work on the 6th june build? Because I'm using SlimLP for now because xposed works on it but I want to change to SlimSaberLP but my only concern is if xposed working or not?
Click to expand...
Click to collapse
I'll build the ROM tomorrow, will also try XPosed on it. I'll state it in the development thread. See you there tomorrow!
still waiting a new build