Q&A for [ROM] Cyanogenexus v1.0.1 for Xolo Q800[KITKAT FLAVOUR]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] Cyanogenexus v1.0.1 for Xolo Q800[KITKAT FLAVOUR]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
how to remove Cyanogenmod Boot Logo
I Installed how to Cyanogenmod ROM in xolo q800. but Cyanogenmod Boot Logo fixed in my phone. whenever i installed new theme its shows in starting. please tell me how to remove Cyanogenmod Boot Logo.
Found 1 bug so far
I found 1 bug no issues with gravitybox whatsoever, but the video recording is limited to 640x480p, I tried using 3-4 different video recording apps and I can't record at 720p, also the camera shows very less options compared to my friends cyanogen 4.4 on his Samsung sIII, everything is the same except the camera options. He also gets many many more options in camera/video mode than I do. I only get 2 options in video settings: Time Lapse on/off, Store location on/off. Any fix to this? Please help
where is the small fix
You said u will post a small fix to the ro
please post the fix at the latest u r the only hope for q800
please update the rom to 4.4.4 or lollipop
also add 3g video call to the rom
the rest s working fine
This ROM is BAD
HI
Today I installed this rom and this is my 30+ installation of various roms on my xoloQ800. so you don't have doubt about my installation.
After installation, during the initial setup itself, WIFI was not getting detected. I had to skip it and go ahead. finally when i landed to home screen , I see that none of my 2 sims got activated.
I waited for 15-20mins. still no progress. Rebooted. removed the sim cards and re-inserted them .still no use.
When I got fed up and , decided to install another better rom, suddenly the SIMS got activated. I was happy. but wifi was not switching on. Then thought if i reboot, may be WIFI will work so rebooted. Now again , both SIMS are not activated for a long time.even now when I am typing this, still the SIMS have not got activated.
So I have made my final decision to install another better rom now. Let me know if some one has faced this issue with this rom and if any solution / fix is there ?
Thanks
Mahendra
needing help
i tried to update my smartphone by that system
though i followed all steps
my phone didn't switch on
more than that it's unacceptable to make a root because it keeps showing just the logo of that system
so help me if you have any idea about how to solve that problem
dnagamahendra said:
HI
Today I installed this rom and this is my 30+ installation of various roms on my xoloQ800. so you don't have doubt about my installation.
After installation, during the initial setup itself, WIFI was not getting detected. I had to skip it and go ahead. finally when i landed to home screen , I see that none of my 2 sims got activated.
I waited for 15-20mins. still no progress. Rebooted. removed the sim cards and re-inserted them .still no use.
When I got fed up and , decided to install another better rom, suddenly the SIMS got activated. I was happy. but wifi was not switching on. Then thought if i reboot, may be WIFI will work so rebooted. Now again , both SIMS are not activated for a long time.even now when I am typing this, still the SIMS have not got activated.
So I have made my final decision to install another better rom now. Let me know if some one has faced this issue with this rom and if any solution / fix is there ?
Thanks
Mahendra
Click to expand...
Click to collapse
I found a lollipop based 4.4.2 rom for q800 its called aliceproject google it, i found 0 bugs, camera records at 720p, both my SIMS work, wifi bluetooth etc works and battery standby has increased tremendously.
I Love this Rom, but I found some bugs
After I'm flashing my xolo using this Rom's, I though this is the perfect rom's that I ever used. But after I'm using it for a days, the force close always happen a specially when I open email using Gmail and browsing using default browser. and it;s happen to with some instant messanger. I'll be greathfully if you can fix it. thanks
Related
Hi guys. It is my first time to run cyanogenmod on my phone. I have the Samsung Galaxy Exhibit 2 4G and I tried to install the CM 11 of jfbs. I did all the backups and I wiped the data and cache and installed the ROM and Gapps. But I rebooted my device and the Cyanogenmod logo appeared with the spinning arrow and it didn't want to stop spinning (or loading if you want). My phone was stuck on logo and the spinning arrow. I forced the phone to turn off and when I rebooted it I worked but after a little time it went back to the logo and the spinning arrow. I re-installed the ROM and Gapps but like before, the logo and the spinning arrow still there until now and it won't even stop and lead me to the lock screen. PLEASE can somebody tell me if it won't work or what is wrong whit it or if it is matter of time, how long should i wait? PLEASE I need to know what is going on and what to do. :crying:
theking1st said:
Hi guys. It is my first time to run cyanogenmod on my phone. I have the Samsung Galaxy Exhibit 2 4G and I tried to install the CM 11 of jfbs. I did all the backups and I wiped the data and cache and installed the ROM and Gapps. But I rebooted my device and the Cyanogenmod logo appeared with the spinning arrow and it didn't want to stop spinning (or loading if you want). My phone was stuck on logo and the spinning arrow. I forced the phone to turn off and when I rebooted it I worked but after a little time it went back to the logo and the spinning arrow. I re-installed the ROM and Gapps but like before, the logo and the spinning arrow still there until now and it won't even stop and lead me to the lock screen. PLEASE can somebody tell me if it won't work or what is wrong whit it or if it is matter of time, how long should i wait? PLEASE I need to know what is going on and what to do. :crying:
Click to expand...
Click to collapse
(as a dev for this phone)
If you could PM me with more details that would be helpful. When i hear that it continues after a reboot(not the first person to have said that) i think its that you are not waiting enough time. That may or may not be the case. I would give it a good 5 min. I have never timed mine but it does seem to me that prior android versions took about 2-3min maybe and for w.e. reason android 4.4(cm-11.0) takes a few more min. Anything over >=10min though id say is too much. In these cases the only things that can really help are logs. Logs are the only way you can show a dev what you are experiencing.
(as a xda member)
Also i would use the device thread not the general android thread, read through the rom thread of the rom you are tryng to install, and a last and final note, I would recommend that anyone that is new to install older more mature roms first. These roms will yield the best experience in most cases. Then once you are familiar you can experiment with other roms/mods etc etc.
cars1189 said:
(as a dev for this phone)
If you could PM me with more details that would be helpful. When i hear that it continues after a reboot(not the first person to have said that) i think its that you are not waiting enough time. That may or may not be the case. I would give it a good 5 min. I have never timed mine but it does seem to me that prior android versions took about 2-3min maybe and for w.e. reason android 4.4(cm-11.0) takes a few more min. Anything over >=10min though id say is too much. In these cases the only things that can really help are logs. Logs are the only way you can show a dev what you are experiencing.
(as a xda member)
Also i would use the device thread not the general android thread, read through the rom thread of the rom you are tryng to install, and a last and final note, I would recommend that anyone that is new to install older more mature roms first. These roms will yield the best experience in most cases. Then once you are familiar you can experiment with other roms/mods etc etc.
Click to expand...
Click to collapse
Thank you @cars1189 for your answer. I used the device thread to do it but the problem is, I let it spinning for more than 5 hours. I have flashed many roms in my phone since i had it (more than 10 times or more) and i know that it does not take more than 10 mins max to install. But don't worry after that i went back and restored my previous CM 9 rom and right now i'm on the CM 11 build of 1-29-14 of your CM mass thread. It works fine, not at 100% but it doesn't drain my battery like your CM 10.2 build of 1-11-14 and it is almost stable. I will try tonight to use your ADC kernel with the jfbs CM 11 rom that first didn't work for me because I saw in your thread that this kernel may help it to load and install without the spinning issue. So i will give it a shoot. But anyways thanks for your answer and it means a lot to me really. :good:
GOOD
@cars1189 , I'm actually running the 6-18-14 build of CM11 and as far as it goes, i'm not encountering any major issue at the moment. The theme engine is working fine for me and battery life is great for my usage. I use this build as a daily driver, and it does a great job. Calls, texts, data, wifi, Bluetooth and GPS are all working. I had issues before with the amount of RAM available, but now that it has 375MB of RAM, it is more snappy. Just :good: Thank you for your work on our to make our phone still valuable today!! THANKS MAN!!!!!!
[Q&A] [ROM] Android Revolution HD 52.0 | Android 4.3 Jelly Bean | High Quality & Per
Q&A for [ROM] Android Revolution HD 52.0 | Android 4.3 Jelly Bean | High Quality & Performance | I9300XXUGND5 | AROMA
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] Android Revolution HD 52.0 | Android 4.3 Jelly Bean | High Quality & Performance | I9300XXUGND5 | AROMA. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
I cant download anything from play store. Help me. "Error. Cant retrieving information from server"
i have same problem with wifi connection,and i try to wipe cache still the problem persist.. great rom btw
My Phone Doesnt turn on after normal lock
Hi, could you help me? I have a S3 I9300 White is Stock Rom 4.3 update OTA, but it happens that the cell is working properly, normal function, but when the screen lock and unlock the phone, the screen does not turn on, just turn on the LEDs of menu and back, the solution is to restart the phone again normal work and not just let it hang sometimes when locked, the LED turns on of the flash, my question is, will need to change the screen? that is not broken and the touch works perfectly, only when the phone is locked, the screen does not turn on. Oh and the brightness does not work, it stays on maximum brightness.
Low Battery duration Android revolution HD 52.0
Hi, just on monday (27/10/2014) i flashed android revolution hd 52.0 and it was very quick at the beginning, as all roms in effects.
After having installed all applications i had before, the phone is a little bit slower but it's something reasonable at all, i only hobe that this speed will be constanct in the time.
The problem i found is about battery.
The first two days the battery duration was the same of custom rom but starting from the third day (yesterday 29/10) i saw a repentine descharge of the battery and what i did until the day before and with the stock rom, was impossible by now.
I have clockwork mode 6.0.4.7 and in that recovery there isn't any wipe battery stats so i downloaded an apk (battery calibration) that did it.
After done calibration nothing is changed.
I noticed even a longer time of recharge, it takes more to charge then to discharge!.
Anyone had my same problem??
Android Rev HD 52.0 by mike1986
Hi, Does anyone know why my music stutters sometimes. Does this with both earphone jack in and out. It did the same when i was on the stock rom.
Could it be that the audio bitrate is high and/or the audio files were saved in dual stereo format?
Soccermanager, do you have your music on an external SD-card?
PiratDjinn said:
Soccermanager, do you have your music on an external SD-card?
Click to expand...
Click to collapse
It's on the phone.
Then I don't know what to do. I had the same problem with music on external SD-card, but not anymore. All i did was root and install ARHD. What version do you use?
will Revolution hd work on stock I9300XXUGNB6?
hi,
Will the revolution HD for S3 work if i have a stock which is will Revolution hd work on stock I9300XXUGNB6?
Thank you, is a pleasure to see how this ROM evolves.
Someone have some issue with screen mirroring or dlna protocol? i havent find yet a custom rom with screen mirroring working
thanks for this rom
Hi! Is there a way to minimized the battery usage in this rom? My battery is draining 1% every 3 minutes with my wifi in use
This rom is fast. Got 25070 score antutu benchmark test
Bricked
After AROMA installation it just gets stuck at boot logo. Recovery is not even available, also tried the installer with everyhing unticked and and still nothing. If it matters I'm using latest version of CWM Recovery. And yea, I did wipe data/cache/dalvik.
No remove of Bloatware
Hi,
I just installed AR!
It's awesome!
But installed it because i didn't want bloatware, but it's still there!
And i don't want to do it manually...
And is there a way to free up more ram, because now I have 831 mb ram.
Random flashes and freezes
Thank you, Mike for developing such an amazing rom.Everything is perfect but when I turn GPS on or play games , the screen shows random flashes and signal bar become unavailable and all connections went down.The phone become freezed and I have to do forced restart or take the battery out.When the screen turn on, the battery become zero no mattet how much juice left before this happened.I have no idea what is happening to my phone and it happened 5 times already.I redo every steps of flashing a custom rom but it didn't make any difference. So I hope you will give me a solution soon.
please help i soft brick my S3 phone
i tried to edit Build.prop file to enable the soft nav. buttons ( qemu.hw.mainkeys=0) i used Rom toolbox to edit it
but after rebooting i got Samsung boot screen & then black screen i cant enter to my rom .
but thank God i still can enter recovery mod (CWM) & download mod ( but i can't use it to flash stock because usb debbing is off)
i will try to edit it back using Adb, but if i faild to do it.
i will flash Android Revolution HD 52 , will it replace the build.prop file ?
SOLVED
thank God i did it via Adb i pulled build.prop to my pc edit it and bushed it back .
but i have some questions hope u help me with it
as u know Android Revolution HD 52 based on 4.3 rom iam now using cm11 4.4.4 if i flash AR HD is this considered to be downgrading ? does it affect my device in any way ? FYI: my baseband no. still the same 4.3 modem
i also want to know what i did wrong when i edit build.prop i saw many videos & read many posts on how to edit & i wrote the code correctly it seems to me that nothing wrong .
i edit it using toolbox pro root explorer
i long pressed on .prop file a pop up came with three columns
read (3 option checked) write ( two checked) execute (0 checked)
i just pressed ok & wrote the code line & restarted my device
if u know what went bad i will be thankful to know
from CM11 to revolution HD - galaxy s3
Hi, i'm using cyanogenmod 11 nightlies on my i9300. Today i've tried to install revolution HD rom using CMW recovery after full wipe (data, cache e dalvik). The installation was succesfully, the OS works fine but i do not have 3g/edge connection. I've tried to flash a different modem with the same result.
Slow data after flashing?
Howdy all!
First off, thanks for the ROM, it's amazing!
I am kinda new to rooting and flashing etc, I am a quick learning and believe I know a fair amount of information.
The problem is, my T-Mobile i9300 has got slow data, it used to hover around h and h+ most of the time, and now it only seems to be stuck on E.
I have tried different APN settings to no avail, however if someone could offer me APN settings that work, I'd be grateful!
Thank you for your time,
Kind regards,
-killerojrc
Cannot connect to network
I've flashed the S3 with last Revolution HD and now my phone cannot connect to known network... Probably, it is IMEI problem. What can I do to restore the connectivity??? Really frustrated
GUYS, please HELP. "selected network unavailable" - I don't know what to do. No any solution in the internet ((
Q&A for [ROM][SIRIUS][LP][5.0.2][SM-4.9] CyanogenMod 12 Unofficial [NIGHTLY BUILDS]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][SIRIUS][LP][5.0.2][SM-4.9] CyanogenMod 12 Unofficial [NIGHTLY BUILDS]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Google play and audiofx
The audiofx app doesn't appear to have any effect on the music playing from the google play music app. I've tried going into the audiofx app from within play music, but I just can't get it to work on play music. Not too sure whether audiofx has any affect on other apps other than the default music app. I'm on the latest build (20150111 V2)
Other than that, I can't find any problems. Great work!
no vibration
Hi! This is a great ROM!
Is there a option to activate Vibration?
Bluetooth audio fix by one click
At least for me with my car hi-fi (LAC7000) on the latest nightly dirty flashed over 12. Click Bluetooth, than the device connected for, the gear next to it. Uncheck the first and the third. Like the screenshot attached.
Recovery is not Ok. Lopping on boot.
I have flashed recovey like that
fastboot flash recovery openrecovery-twrp-2.8.3.0-sirius.img
After it, My ph is looping on logo. Pls fix bro.
greenhorn82 said:
Hi! This is a great ROM!
Is there a option to activate Vibration?
Click to expand...
Click to collapse
As in vibrate mode? Sure! Just keep pressing the volume down button when there's no media playing and you'll feel the phone switch to vibrate.
TheDefaultState said:
As in vibrate mode? Sure! Just keep pressing the volume down button when there's no media playing and you'll feel the phone switch to vibrate.
Click to expand...
Click to collapse
No, I mean sound and viration at the Same time.
greenhorn82 said:
No, I mean sound and viration at the Same time.
Click to expand...
Click to collapse
Media volume can be changed within the sound and notification settings in the settings and also when media is playing. There's also an option to also vibrate for calls in the sound and notification settings as well.
Thanks!
After closely watching the development for a month, yesterday I decided to flash it with some outdayed cwm based PhilZ Touch recovery. The install was not successful, and even broke the recovery :S This freaked me out a bit, but after successfully fastboot-flashing stock firmware and newest cwm, I tried again today. The result was the most butter smooth android lollipop experience! Thanks for this amazing rom
Recovery Doesn't work for me
Hi !
First thanks for your amazing rom Infected_ .
For me I have a problem with recovery , it doesn't work with CM12 Recovery ( I can't flash any zip files from my sd card), I must install CM11 recovery V6.0.5.1 which is working very well. When I want to update cm12, I must install CM11 recovery each time.
Do you have a solution for this?
Reboot doesn't works for me, only power off my phone.
Thanks a lot
Build 2015-01-14
Big thx to you infected for your amazing work. Keep it up !
build 2015-01-14 with included kernel
- bluetooth is seriously ****ed up (reboot, switching on/off doesn't help) (i hear something for a second or two then it stops)
- call keeps ending after a minute or so (without speaker phone, i didn't try speaker phone)
That's it
Lockscreen background
Maybe i`m blind, but is there a point to change the Lockscreen background ???
Upgrading to the 20150116 from 20150112v2 via a dirty flash caused it to fail to boot (stuck at the Sony logo). Required me to format System and clean install. Total pain in the ass cause I hadn't done a backup (I'm an idiot, complacency is gonna be my downfall).
Just a gentle reminder to do backups frequently when flashing nightlies!
Super stoked with the ROM, the camera quality is fantastic (better than stock I think - I rooted before you could backup your TA partition and I think my camera quality was never quite the same).
Solution?
I had the exact same problem with the kernel you use, only I managed to wipe both the rom and the recovery. After I flashed a stock fw and the newest cwm (http://forum.xda-developers.com/showthread.php?t=2702001) I could finally flash this rom.
Testing Results for latest version (nightly 1-16-15)
This build is in very good shape. Throughout my wanderings, I have noticed that only a few things that could be fixed (these might have already been recommended, but I am posting them anyways). First, the physical camera button does not work. I understand it is hard to build that button into a CM build, but I figured I would just write it down. I already know that someone has posted this recently, but I would just like to confirm. Another thing is that the double tap to wake feature in the display settings does not function. It can be selected, but the feature will not function, and sometimes the toggle undoes itself after a short period of time anyways. Although, it does not function even right after enabling the feature through the settings. I would also like to ask about charging. I believe CM does not support quick charging at this time, but I have noticed that it takes significantly longer to charge my device than stock rom. I have tried a variety of chargers, and I achieve the same result. I am just using standard 2.0-2.4 Amp chargers that my device has always used. I just have noticed that it takes a long time to charge (significantly longer than my OPO, but that thing charged faster than my Z2 in the first place). Last thing that I have noticed is very minor. On stock rom, the camera had an option for 16:9 15.5 MP shots that I frequently used since I do not really like 4:3 photos. I know the camera was a pain to get working in the first place, but this setting is not present anymore (in the included app and third-party apps). Anyways, these builds are really nice, much better than I expected for nightly revisions, so thank you!
DT2W works 20150118.
TWRP
Hi there,
first of all great work! The Rom ist just running fine on my device. The only problem seems to be the delay on calls.....but that's nothing to worry about^^. The other problem i have.....i flashed the twrp recovery several times. The twrp recovery does start....but only with the *.bat installer in windows. When i try to start it from the device it doesnt work. Instead, the cm12 recovery does start. Did i miss smth?
Greets form germany ;D
Got some problems with last build. Phone restarts after shutting down. Calls on Viber, Hangouts and Skype are broken. So I cant hear the other person. but he can hear me.
Su binary
cannot update my su binary..any suggestion?
Updating SuperSu
freshvibez77 said:
cannot update my su binary..any suggestion?
Click to expand...
Click to collapse
This is an issue, but you can update supersu by flashing the latest zip file here: download.chainfire.eu/supersu
I'm sorry for not posting a link, but XDA won't allow me to because of how new my account is. Just copy and paste that to get to Chainfire's SuperSu download page
I have a rooted Samsung S2 which suddenly stopped making & receiving calls. After speaking with Vodafone they recommended performing a hard rest which then resulted in the phone freezing at the Samsung logo.
I then booted into Recovery (Cyanogenmod) and cleared caches and reset the phone. After that I could now access the phone again but noticed the following issues.
Several apps, File Manager, Music Player, Voice Recorder brought up the “No SD card inserted”
Camera App brings up “Security policy restricts use of camera” message
When trying to access wifi or if the screen switches off the phone reboots and freezes again
I wanted to try flash a stock ROM but cannot enable the USB debugging option as tapping the Build version to enable developer mode doesn’t work.
If anyone could shed some light on this problem(s) and offer a possible solution I’d appreciate it. I have a basic understanding of rooting, flashing etc. but not much more.
Thanks in advance
Hi
Thanks for writing to us at XDA Assist. Please standby while we have your thread/question moved to the appropriate sub-forum for your device.
For future reference you can find your device sub-forum here (bookmark/subscribe this):
Samsung Galaxy S II I9100
Within that section you will find a dedicated q&a sub-forum (this is where your thread is going to be moved to):
Galaxy S II Q&A, Help & Troubleshooting
Good luck!
Goodamadán said:
I have a rooted Samsung S2 which suddenly stopped making & receiving calls. After speaking with Vodafone they recommended performing a hard rest which then resulted in the phone freezing at the Samsung logo.
I then booted into Recovery (Cyanogenmod) and cleared caches and reset the phone. After that I could now access the phone again but noticed the following issues.
Several apps, File Manager, Music Player, Voice Recorder brought up the “No SD card inserted”
Camera App brings up “Security policy restricts use of camera” message
When trying to access wifi or if the screen switches off the phone reboots and freezes again
I wanted to try flash a stock ROM but cannot enable the USB debugging option as tapping the Build version to enable developer mode doesn’t work.
If anyone could shed some light on this problem(s) and offer a possible solution I’d appreciate it. I have a basic understanding of rooting, flashing etc. but not much more.
Thanks in advance
Click to expand...
Click to collapse
You can flash stock ROM using download mode. Odin should detect you phone after you do this.
gsstudios said:
You can flash stock ROM using download mode. Odin should detect you phone after you do this.
Click to expand...
Click to collapse
Thanks for the reply;
Because there seemed to be quite a few issues with my phone I got the local phone shop to have a look at it & they tell me that the hard drive is dead and would cost too much to repair so I guess it's new phone time!
Hey guys hopefully someone will be able to help me. So i got the phone a couple of days ago and ive had previous experience with rooting ( G3 & G4) anyways i rooted the V10 everything went smooth then i flashed the [ROM] LG V10 H901-10c Debranded, Debloated, Deodexed ROM - Clean & Stable by siraltus ( great ROM btw ) and then i decided for some reason i wanted to try a different rom so i flashed over [ROM] Evil Yummy Gumdrop! 5.1.1, this is where i started to have issues with my phone. The phone doesn't play videos, it'll just go to a black screen but still plays the audio, the screen lock doesn't work everytime i click on "Select screen lock" it says "Unfortunately, Lock screen settings have stopped." i cant set up my finger scanner "Unfortunately, the process com.android.settings has stopped" , and i cant record videos if i want to "An Error has occurred" . Of course i made a back up of the original t-mobile and i recovered it but it still did the same thing, along with every ROM i flashed over. This is driving me crazy and i cant seem to find the answer. Can someone help me ?
Dude I have the same issue, I did exactly what you did! I'm on 5.1.1 and don't wanna updgrade to MM 6.0 because of the rooting issue but I think after 2 weeks of trying to fix this the MM update will write right over those drivers again and everything should be good to go then. If only somebody can make a flashable file with the drivers for it!
Did either of you perform FULL wiped between ROM flashes and before restore of nandroid? Sounds like residual effects from not wiping clean are plaguing your new flashes
Sent from my LG-H901 using XDA-Developers mobile app
im having these exact same issues! is there a fix for this?? please please please help me!