i have got a big problem...
flashed existenz 4.0 rom..
after sometime i restarted the phone..
phone switched off but not being on...
tried pression red button also.
no vibration...
tried power+volume up button ..
no response..
tried to put on charge ..
no led light ...
it seems to be dead...
no booting in recovery nor fastboot...
plz help//// urgent
preet979 said:
i have got a big problem...
flashed existenz 4.0 rom..
after sometime i restarted the phone..
phone switched off but not being on...
tried pression red button also.
no vibration...
tried power+volume up button ..
no response..
tried to put on charge ..
no led light ...
it seems to be dead...
no booting in recovery nor fastboot...
plz help//// urgent
Click to expand...
Click to collapse
Not sure flashing a ROM can stop a phone powering on. Try these steps turn on.
I recently messed a flash up and used FLASHTOOL and a FTF firmware to return to stock to resolve it. Certain ROMs cannot be flashed without unlock bootloader and some require a stock with matching android version (4.4.4 stock to 4.4.4 custom rom)
There is a red reset key under the left flap
That might be useful to you
Related
today i tried flashing the aokp build 4 to my xperia s and after i tried rebooting the phone from the recovery it just stays at a black screen! i have tried connecting the phone to my pc and reflashing the original firmware via flashtool but all i get are errors! i have also tried connecting in fastboot mode but there is no pc detection even tho the blue led appears on my phone! somebody please help since when i turn my phone on all it does is vibrate! no sony logo no nothing! and when i keep holding the power button a green led light flashes evry few seconds!!!! EMERGENCY!!!!
EDIT: i fixed it guys. all i did was restart my pc and flashtool worked again so i reflashed an ics tft file and all was good again!
Hello.
I have rooted the xperia U using the flashtool by following a guide available on xda. Everything worked fine. I wanted to install a custom rom for which I had unlock my bootloader and flash a custom recovery for flashing the rom. I downloaded and flashed cwm. So I unlocked the bootloader using the official method, i flashed the boot.img of the custom rom(in fastboot) and tried to go to recovery, but my phone wouldn't switch ON now.
I was able to make it reach flashboot mode(green) and tried flashing ftf.. Even that's not working.
The service update software is not even detecting my phone.
Please help.:crying:
When you say, not switching on, can you feel it vibrate when you push the power button?
Also whats the error you receive on flashtool?
Yes, i do
But the screen is blank and I can only see the red notification light
rohitbalan said:
But the screen is blank and I can only see the red notification light
Click to expand...
Click to collapse
May be you flashed wrong kernel, which is not for your phone.
Try to charge the phone for a few hours and after thats try flashmode again to flash stock rom...
same problem
Actually I am facing the same issue u had with your Sony xperia u. Please help.
Charge the battery, seems gone flat. Leave it on charge for half an hour or so. If that doesn't work maybe the software is corrupted to the point it doesn't cold boot to charge, so charge battery separately using external charger for half an hour or so. It should be able to boot at least to flash mode (Vol Down + Power).
Hi guys my brother was using my old Neo V and he restarted the device and then all of a sudden the device gets bricked.
We cant turn on the device nor charge it or connect to the PC (no LED appears). We tried reinserting the battery and try charging it but still no luck. The device was running Ultimate HD ROM.
Can someone please help, everything was working perfectly before
TheUnknownCopy said:
Hi guys my brother was using my old Neo V and he restarted the device and then all of a sudden the device gets bricked.
We cant turn on the device nor charge it or connect to the PC (no LED appears). We tried reinserting the battery and try charging it but still no luck. The device was running Ultimate HD ROM.
Can someone please help, everything was working perfectly before
Click to expand...
Click to collapse
Try flashing a stock Rom with Flashtool.You will lose everything but at least you might get your device back
Firekostas said:
Try flashing a stock Rom with Flashtool.You will lose everything but at least you might get your device back
Click to expand...
Click to collapse
I tried using flashtool, but my phone does not even connect to the PC, the LED light doesnt even show
TheUnknownCopy said:
Hi guys my brother was using my old Neo V and he restarted the device and then all of a sudden the device gets bricked.
We cant turn on the device nor charge it or connect to the PC (no LED appears). We tried reinserting the battery and try charging it but still no luck. The device was running Ultimate HD ROM.
Can someone please help, everything was working perfectly before
Click to expand...
Click to collapse
did you tried all the steps mentioned below
1. Run the flashtool in FlashMode
2. Select the firmware (Only the checkbox's related WIPE should be checked)
3. When it asks for the phone to start by pressing the back button and plug the USB, the flashing will start....
My phone got stuck in the boot logo after installing a Custom ROM (i missed formatting the system). Then i tried the above steps to bring back my phone.
Do you have unlock bootloader? If yes then lock. and next step flashtool. Instruction to lock bootloader i thread how unlock in neo v section. You welkome ;]
strefa510 said:
Do you have unlock bootloader? If yes then lock. and next step flashtool. Instruction to lock bootloader i thread how unlock in neo v section. You welkome ;]
Click to expand...
Click to collapse
If he has an unlocked bootloader...then why does he need to lock it??
Flash a custom kernel..nd then custom rom..:good:
You guys dont understand.
I cant even connect my phone to the PC, it seems to be completely dead. LED is Dead. The phone seems dead.
When you connect notification led even flash for one second? try. I was brick my fon 3 months ago and led nothing work. But when'e i connect led worked for one second. Meabe you try update you system via OTA? That why brick.
TheUnknownCopy said:
You guys dont understand.
I cant even connect my phone to the PC, it seems to be completely dead. LED is Dead. The phone seems dead.
Click to expand...
Click to collapse
MUST BE YOU ACCEPTED AN OTA UPDATE.
Sent from my MT11i using Tapatalk 2
Have you try charging with wall charger...?your battery seems empty
Sent from my MT11i
--Deleted --
i unlock bootloader and flashed kernel - [KERNEL][GPL] Vengeance [1.28][28/04]
my phone stuck on sony logo and i can't do anything. I can't charge, there is no response when plugged into pc
please help
Try to enter in flash mood if you entered in flashmood flash any of ur ftf..
From my XPERIA U JB
Flash stock and you're ready.
Sent from my MT27i using xda premium
tianus said:
i unlock bootloader and flashed kernel - [KERNEL][GPL] Vengeance [1.28][28/04]
my phone stuck on sony logo and i can't do anything. I can't charge, there is no response when plugged into pc
please help
Click to expand...
Click to collapse
Press vol Up and Power button
Wait about 15 seconds
Ur device well turn off
Now
Open flash tool(make sure u downloaded needed firmware
And flash it via
Flash tool flash mode
Ur device will get normal
U won't lock your bootloader
But u will lose root and stuff installed in your device
Press thanks if I helped
Sent From My Xsola Running Ultimate Ex Rom
HELP!
Hi
I had the JB munjeni ROM in my SOLA. I tried to root it, but I flashed a wrong zip. Then my phone didn`t turn on. It responded to hard-reboot and hard-power off. I tried to flash by fastboot kernel and it worked. When it was flashing system.sin, something failed, and now my Sola doesn't respond to hard reboot or power off. It's almost impossible to put it in flashboot or fastboot. Sometimes it gets into fastboot and then shows Sony logo, then nothing happens. The only thing it does is to show red LED when connected.
Please help me! I'm desperated already!
Sola Stuck on Sony logo+battery not charging
Hi guys,
I was using munjeni's jelly bean port+ etch04's experimental kernel for sometime and everything was great until yesterday. My battery died out completely and when I plugged it into the charger it turned on and was stuck in the Sony logo. There was no charging indicator. I thought omg so this is what a hard brick looks like. As you know, the sola's battery isn't removable so I thought I was doomed.Tried a hard reset and there was no difference. So I kept it there (plugged in, stuck in the sony logo) for a while, plugged it out and turned it on. Luckily, IT HAD CHARGED even if the charging indicator or display didn't show it. So I tried turning it on but it got stuck on the sony logo as usual. Since the battery had charged a little, I plugged the phone in fastboot mode and flahed etch04's experimental kernel again. But it still got stuck in the sony logo. Then, as a last resort I flashed the stock ICS .54 kernal using flashtool and IT WORKED! (charged with charging indicator and display)
Then I flashed etch04's kernel again and now everything's back to normal.
Here's the stock ICS .54 kernel.
View attachment MT27_6.1.1.B.1.54_KERNEL.rar
Place it in flashtool/firmware folder and flash with flashtool.
Good Luck!
juansefm said:
Hi
I had the JB munjeni ROM in my SOLA. I tried to root it, but I flashed a wrong zip. Then my phone didn`t turn on. It responded to hard-reboot and hard-power off. I tried to flash by fastboot kernel and it worked. When it was flashing system.sin, something failed, and now my Sola doesn't respond to hard reboot or power off. It's almost impossible to put it in flashboot or fastboot. Sometimes it gets into fastboot and then shows Sony logo, then nothing happens. The only thing it does is to show red LED when connected.
Please help me! I'm desperated already!
Click to expand...
Click to collapse
Hey!
don't flash the whole rom. Try flashing just the kernel.
http://forum.xda-developers.com/attachment.php?attachmentid=2082340&d=1372646334
Check it out.
Good Luck!
Guys plz help me out....
i flashed this ROM on my friends A116 HWv01 SWv16
It was running smoothly until after 1-2 days it hanged and stuck at bootloop, unable to enter recovery ( Mediatek logo came but then it switches off).
I flashed stock ROM but it gave error and was stuck at 41% in green bar.
I tried to reflash it but it gave same error 3149 and this time stuck at 34%.
If i try to boot, it shows canvas logo.
I retried to flash last time but since then it is giving me "BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail" error.
Preloader is intact as it detects A116.
I have succesfully flashed through sp tools before.
I have two stock ROMs both giving same error.
S9201_4.2_MP_F3F8_B1_IN_MMX_09_FLASHER_USER
S9201_MP_F4_B1_IN_MMX_0.16__flasher_user
I think Ram of the device has actually failed... Maybe.. U tried roehosoft ram expander which causes such problems ??
Redownload everything and try again... Go here.. http://forum.xda-developers.com/showthread.php?p=42269382
vsvipul555 said:
I think Ram of the device has actually failed... Maybe.. U tried roehosoft ram expander which causes such problems ??
Click to expand...
Click to collapse
No I didn't use any such app...
$hino said:
Redownload everything and try again... Go here.. http://forum.xda-developers.com/showthread.php?p=42269382
Click to expand...
Click to collapse
Redownloaded and tried but failed...
Even if I tick just preloader, it fails to flash. Any help?? Or should I take to MMX center?? How much would it cost??
$hino said:
Redownload everything and try again... Go here.. http://forum.xda-developers.com/showthread.php?p=42269382
Click to expand...
Click to collapse
Okay I redownloaded and now its giving me error 3149 and stuck at 22℅ in green ... But my phone shows charging when connected to charger.
When I try to boot in recovery, it shows volume up is recovery, and when I press it, it shows Chd logo n shuts down...
Can I try only to flash Philz recovery and then can I restore backup?? Will it work??
Cod3AlchemisT said:
Okay I redownloaded and now its giving me error 3149 and stuck at 22℅ in green ... But my phone shows charging when connected to charger.
When I try to boot in recovery, it shows volume up is recovery, and when I press it, it shows Chd logo n shuts down...
Can I try only to flash Philz recovery and then can I restore backup?? Will it work??
Click to expand...
Click to collapse
That could work... First flash the stock recovery.... And then flash philz... If that doesn't work am afraid you're gonna have to go to service centre... But beware they are gonna loot you... One of my friends was asked to pay 1000 for ruining the phone..
$hino said:
That could work... First flash the stock recovery.... And then flash philz... If that doesn't work am afraid you're gonna have to go to service centre... But beware they are gonna loot you... One of my friends was asked to pay 1000 for ruining the phone..
Click to expand...
Click to collapse
Update: it shows charging but it isn't really!!
Can you give me steps for it??
What should I tick in so tools??
Sent from my A116 using XDA Premium 4 mobile app
$hino said:
That could work... First flash the stock recovery.... And then flash philz... If that doesn't work am afraid you're gonna have to go to service centre... But beware they are gonna loot you... One of my friends was asked to pay 1000 for ruining the phone..
Click to expand...
Click to collapse
Okay I now have working recovery.... I tried flashing Discovery but got screen flicker and auto shutdown.... Same with PXZ2 (bootloop) ... Can you give me cwm flashable zip for stock 4.2.1??
Sent from my A116 using XDA Premium 4 mobile app
Cod3AlchemisT said:
Okay I now have working recovery.... I tried flashing Discovery but got screen flicker and auto shutdown.... Same with PXZ2 (bootloop) ... Can you give me cwm flashable zip for stock 4.2.1??
Sent from my A116 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Here you go..Hit thanks if i helped.. http://d-h.st/fXr
$hino said:
Here you go..Hit thanks if i helped.. http://d-h.st/fXr
Click to expand...
Click to collapse
Is it cwm flashable???
Sent from my A116i Pure Xperia Z2 rom.
Cod3AlchemisT said:
Is it cwm flashable???
Sent from my A116i Pure Xperia Z2 rom.
Click to expand...
Click to collapse
Yes it is....
Same problem guys!!!
Hey guys
I got into a wierd problem today!
I am using MIUI ROM but flashed Discovery few days back so Boot logo is still of Mediatek(discovery rom)
It was perfectly working since installation!
But today - I pressed unlock button! Slided the screen unlock down , but screen didnt unlock , it got stuck there!
I pressed unlock button again and screen went off, Now i pressed unlock again to turn it on!
This time nothing came on screen , only hardware buttons light came up! and from this point on unlock button had no effect!
As last resort i pulled the battery! BUT now it gets stuck at boot logo(not bootanimation) . I cant open recovery or fastboot by volume buttons . It stays at bootlogo for around 30 seconds before restarting to again get stuck in boot logo!
If i connect phone without battery! MT65xx preloader gets installed on laptop but i cant do anything because it keeps getting restarted there also!
I am out of troubleshooting Ideas ! please suggest!
akshay961 said:
Hey guys
I got into a wierd problem today!
I am using MIUI ROM but flashed Discovery few days back so Boot logo is still of Mediatek(discovery rom)
It was perfectly working since installation!
But today - I pressed unlock button! Slided the screen unlock down , but screen didnt unlock , it got stuck there!
I pressed unlock button again and screen went off, Now i pressed unlock again to turn it on!
This time nothing came on screen , only hardware buttons light came up! and from this point on unlock button had no effect!
As last resort i pulled the battery! BUT now it gets stuck at boot logo(not bootanimation) . I cant open recovery or fastboot by volume buttons . It stays at bootlogo for around 30 seconds before restarting to again get stuck in boot logo!
If i connect phone without battery! MT65xx preloader gets installed on laptop but i cant do anything because it keeps getting restarted there also!
I am out of troubleshooting Ideas ! please suggest!
Click to expand...
Click to collapse
Flash stock ROM using sptools..... here is the link: http://forum.xda-developers.com/showthread.php?t=2312557
Just replace recovery.img with your own recovery of choice (rename it to recovery.img).
Flash it using sp tools..... i get BROM error but recovery gets flashed which will help you restore your nandroid backup.