Related
Hello All,
I just bricked my x10, and have no idea whats going on, other than knowing that the x10 is bricked! So this is what happened...
I backed everything with titanium backup, and then proceed to do my JIT and Cleaner in shell root. I first shell root then ran the JIT_enabler v2, then after that I ran the junk_cleanup. When the junk cleanup finishes, I ddint like how it was set up and couldnt figure out how to change it back, so I did a full system backup from titanium. After the backup it was still no good, I then proceed to do a factory reset in the privacy tab in system settings. When I came back to my phone after the factory reset, it erased everything.... my screen was blanked and I couldnt do anything. I restarted the phone, and the phone was stuck on the Sony Ericsson logo. I couldnt even turn off my x10. I restarted one more time by taking the battery out, but it is still stuck at the Sony Ericsson Logo... what should I do? is my phone done for? i only had it for less than a week =[
please help! thanks!
You'll need to repair your phone, using pc companion. At update it'll say up to date, update it anyway and you'll start from scratch.
Sent from my X10i using XDA App
but the problem for using PC companion is that I cannot even connect my phone with PC companion because I cannot mount my memory card. Its stuck at the SE logo sign, and when I plug in the usb cable, it tells me to drag down the menu and mount the memory card.... and I cannot do that because my main screen is still stuck on SE logo... any ideas? Thanks!
You do not need to mount your sd card for pc companion or seus to work. Load pc companion, take the battery out of your phone for 30 seconds. Put the battery bck in the phone and attach thhe usb cable. Do not plug the other end in to your pc yet. Start the update on pc companion and it should ask you to attach the phone in flash mode. When it does that hold the back button on your phone down and while still holding itdown, plug the usb cable in to your pc. Follow the instructions and it should then be back to normal
projectseahorse said:
Hello All,
I just bricked my x10, and have no idea whats going on, other than knowing that the x10 is bricked! So this is what happened...
I backed everything with titanium backup, and then proceed to do my JIT and Cleaner in shell root. I first shell root then ran the JIT_enabler v2, then after that I ran the junk_cleanup. When the junk cleanup finishes, I ddint like how it was set up and couldnt figure out how to change it back, so I did a full system backup from titanium. After the backup it was still no good, I then proceed to do a factory reset in the privacy tab in system settings. When I came back to my phone after the factory reset, it erased everything.... my screen was blanked and I couldnt do anything. I restarted the phone, and the phone was stuck on the Sony Ericsson logo. I couldnt even turn off my x10. I restarted one more time by taking the battery out, but it is still stuck at the Sony Ericsson Logo... what should I do? is my phone done for? i only had it for less than a week =[
please help! thanks!
Click to expand...
Click to collapse
Right my friend, don't worry. As long as you can get to a Sony Ericsson logo it is not bricked!
By getting to the Sony Ericsson logo it means that Flash mode is still available.
Have you changed your carrier code on the phone? If so use the firmware for that code, if you are not sure just ask again what we mean
Secondly get the Flash tool, stick in the firmware, boot into flash mode and you should be set my friend.
Just make sure its the right firmware for your phone
If you need any more help just ask
Z3X said:
Right my friend, don't worry. As long as you can get to a Sony Ericsson logo it is not bricked!
By getting to the Sony Ericsson logo it means that Flash mode is still available.
Have you changed your carrier code on the phone? If so use the firmware for that code, if you are not sure just ask again what we mean
Secondly get the Flash tool, stick in the firmware, boot into flash mode and you should be set my friend.
Just make sure its the right firmware for your phone
If you need any more help just ask
Click to expand...
Click to collapse
Whats the flash tool, i think i bricked too. Thanks my friend.
succeed, thank you guys so much for the help!
Hi everyone. Can anyone help me figure out what's the problem that i cant boot into CWM. I have Neo MT15i running FINE with stock rom ICS .587, locked bootloader and rooted. I also installed x-Parts as well as CWM 5.5 and busybox 1.20. But my problem is that my phone just cant boot into CWM recovery no matter what i did either press and release volume - continuously when "SONY" logo appears, or using x-Parts function to boot into recovery. It just ends up stuck at "SONY" logo (I waited for about 10 minutes but no respond)
You have to press Back button while booting from Sony Logo to boot into CWM.
svprm said:
You have to press Back button while booting from Sony Logo to boot into CWM.
Click to expand...
Click to collapse
When should i start press the back button? during or before Sony Logo appear?
During Sony Logo appearing.
svprm said:
During Sony Logo appearing.
Click to expand...
Click to collapse
nope, cant boot into recovery also, i still stuck at Sony Logo just like usual ==" is it the kernel problem? shud i upload a screen shot of my kernel version?
Try installing Recovery again by this method:
http://forum.xda-developers.com/showthread.php?t=1364509
i root-ed my neo few weeks ago and everything worked normal until i changed heap on VM Heap Tool ... i chandeg it from 52 to 40 and when i booted mobile phone it's stuck on sony logo... it's kinda looping all the time and i can't turn on my mobile at all, i must take battery out to stop that logo appearing and disappearing
Sir please help me
When I flash new Rom in Xperia neo v.Every time my clockwork recovery deleted
xange said:
Hi everyone. Can anyone help me figure out what's the problem that i cant boot into CWM. I have Neo MT15i running FINE with stock rom ICS .587, locked bootloader and rooted. I also installed x-Parts as well as CWM 5.5 and busybox 1.20. But my problem is that my phone just cant boot into CWM recovery no matter what i did either press and release volume - continuously when "SONY" logo appears, or using x-Parts function to boot into recovery. It just ends up stuck at "SONY" logo (I waited for about 10 minutes but no respond)
Click to expand...
Click to collapse
same problem for me...xperia neo v
Hello.
I have a similar problem, if not identical. I rooted my MT15i today hoping to install a custom ROM I found in this forum.
Everything went fine. I rooted the phone and installed Clockwork Mod Recovery properly.
Then, I downloaded the rom .zip, placed it in /sdcard, made a backup of my current system, wiped data/ full reset and installed the ROM with SUCCESS, as it said in the log.
After that, I rebooted the phone and now it keep stuck in the "SONY" boot screen and won't change no matter what I do.
But I think I know why did this happen. I was following a tutorial found in another site. There was listed only to wipe data and full reset, and not to wipe danvik and cache, as I came to read after I was stuck in the boot screen.
The problem is that now I can't even get to the Clockwork Mod Recovery screen, even if I start the phone holding volume down button (or reset, or any other button the phone might have).
The only thing to do is removing the battery. After starting again, it gets stuck again in SONY screen.
When I plug the phone into my PC, nothing happens. It doesn't get recognised.
It only turns on and stops at the SONY screen again.
I wonder if there's a way to access the Clockwork Mod Recovery menu or some way to return the phone to the stock settings.
Or is it a possible brick?
Thanks for the help already.
Ps.: sorry for the long post.
First of all don't worry your device is not broken
And not every custom Rom support locked bootloader
The reason you can't access cwm because you wiped data
I think you can restore your phone by reflash firmware using flashtool
Sent from my Xperia Neo V using xda premium
I can get the phone to conect to the PC in flashmode. I downloaded the stock firmware of Neo MT15i (v 4.1.A.0.562) and flashed it, but no luck. The phone keeps stuck in the SONY screen. Any ideas?
EDIT: actually, when I bought the phone, it came with Android 2.3, I don't remember the firmware version.
IagoMalta said:
I can get the phone to conect to the PC in flashmode. I downloaded the stock firmware of Neo MT15i (v 4.1.A.0.562) and flashed it, but no luck. The phone keeps stuck in the SONY screen. Any ideas?
EDIT: actually, when I bought the phone, it came with Android 2.3, I don't remember the firmware version.
Click to expand...
Click to collapse
It doesn't matter which android version you flash all should work
make sure you checked those boxes in flashmode
Wipe data
Wipe cache
Wipe apps log
No final verification
And just to know when you flashed the firmware. Does it completed successfully?
Sent from my Xperia Neo V using xda premium
monobianco87 said:
It doesn't matter which android version you flash all should work
make sure you checked those boxes in flashmode
Wipe data
Wipe cache
Wipe apps log
No final verification
And just to know when you flashed the firmware. Does it completed successfully?
Sent from my Xperia Neo V using xda premium
Click to expand...
Click to collapse
Well, I got the phone to boot. I was just trying to flash an incomplete firmware, I guess. I downloaded a new firmware I found in a rooting tutorial thread in this forum and flashed it. The phone is now working fine.
But now it's not rooted anymore. Maybe in the future I'll try to root and flash a new rom.
Thanks for the help, anyway. :laugh:
Never mind, but I suggest you unlock your bootloader if you would like to flash custom Rom
Sent from my Xperia Neo V using xda premium
IagoMalta said:
Hello.
I have a similar problem, if not identical. I rooted my MT15i today hoping to install a custom ROM I found in this forum.
Everything went fine. I rooted the phone and installed Clockwork Mod Recovery properly.
Then, I downloaded the rom .zip, placed it in /sdcard, made a backup of my current system, wiped data/ full reset and installed the ROM with SUCCESS, as it said in the log.
After that, I rebooted the phone and now it keep stuck in the "SONY" boot screen and won't change no matter what I do.
But I think I know why did this happen. I was following a tutorial found in another site. There was listed only to wipe data and full reset, and not to wipe danvik and cache, as I came to read after I was stuck in the boot screen.
The problem is that now I can't even get to the Clockwork Mod Recovery screen, even if I start the phone holding volume down button (or reset, or any other button the phone might have).
The only thing to do is removing the battery. After starting again, it gets stuck again in SONY screen.
When I plug the phone into my PC, nothing happens. It doesn't get recognised.
It only turns on and stops at the SONY screen again.
I wonder if there's a way to access the Clockwork Mod Recovery menu or some way to return the phone to the stock settings.
Or is it a possible brick?
Thanks for the help already.
Ps.: sorry for the long post.
Click to expand...
Click to collapse
Flash a new kernel with cwm recovery using flashtool (by Doomlord). wipe cache, dalvic cache, syste, data, reset factory in cwm recovery.
install a new rom having SAME ANDROID VERSION as ur kernel.
thats it!! REBOOT!
NEO V doesn't boot
I have rooted my Xperia NEO V by installing a custom rom. Now my problem is
1. it is not booting. whenever I want to start it sony logo appears and doesn't go.
2. I tried to flash it but the device is not even recognised by PC
3 I tried to boot it into recovery mode but pressing power button and volume down button and releasing it, pressing power button and back button, and numerous methods, it didnt go beyond sony logo.
4. tried Dooms lord but it also didnt recognise the device. Kept on waiting for the device.
5 Everytime I have to take out the battery and then insert it as it is not being switched off from power button.
6. as soon as I connect it to charging the Sony Logo appears.
7. When I start it after putting the battery again, without connecting it to charging point, it vibrates on starts as it used to earlier, but then doesnt go beyond sony logo.
Is my phone bricked? Please help. Lots of thanks in advance to all the developers.
manojdang2003 said:
I have rooted my Xperia NEO V by installing a custom rom. Now my problem is
1. it is not booting. whenever I want to start it sony logo appears and doesn't go.
2. I tried to flash it but the device is not even recognised by PC
3 I tried to boot it into recovery mode but pressing power button and volume down button and releasing it, pressing power button and back button, and numerous methods, it didnt go beyond sony logo.
4. tried Dooms lord but it also didnt recognise the device. Kept on waiting for the device.
Is my phone bricked? Please help. Lots of thanks in advance to all the developers.
Click to expand...
Click to collapse
What rom were you trying to install? Is your bootloader unlocked? And you can try flashing stock firmware with flashtool to revive it...
Sent from my Xperia Neo V using xda app-developers app
NEO V doesn't boot
Hi,
I installed following in my Neo V MT11i
Super Jelly Bean v6.0(16th august 2013)
best kernel for sjb(fusion 5.4)
debloated updated gapps
using following link . http://forum.xda-developers.com/showthread.php?t=2108632
I am using Kernel_Flasher_v2.0 to flash the image kernel. It recognises the device and shows that the kernel is flashed. But the device doesnt reboot. I root the phone through eroot software. Then I install X parts and go into recovery mode.
I wiped the phone fully, including system format.
Please guide where I am missing some crucial step.
I am using windows 8
Thanks in advance
manojdang2003 said:
Hi,
I installed following in my Neo V MT11i
Super Jelly Bean v6.0(16th august 2013)
best kernel for sjb(fusion 5.4)
debloated updated gapps
using following link . http://forum.xda-developers.com/showthread.php?t=2108632
I am using Kernel_Flasher_v2.0 to flash the image kernel. It recognises the device and shows that the kernel is flashed. But the device doesnt reboot. I root the phone through eroot software. Then I install X parts and go into recovery mode.
I wiped the phone fully, including system format.
Please guide where I am missing some crucial step.
I am using windows 8
Thanks in advance
Click to expand...
Click to collapse
After flashing kernel go to recovery... From there flash rom... It doesn't boot because you flashed a jb kernel on a non jb rom... Flash kernel... Turn on keep pressing volume down button... It will go to recovery... Do wipes... Install zip...
Sent from my Xperia Neo V using xda app-developers app
Hi,
Hope someone can help. I've tried to install a custom ROM today and I'm afraid I managed to brick my phone (Xperia P). Here is what i did:
I started out according to the Starters guide:
-Rooted phone
-Installed CWM
-Made a backup
-Unlocked Bootloader
-Installed JB Moonbreaker 3.5: at this point I was actually still following the starters guide, as in: wiping cache, wiping data,wiping dalvik cache and then installing from zip.
-The phone is currently stuck on the loading screen that comes after "Sony" and "Xperia" (the colorful swirling thingie)
-I can only shut it down by pressing and holding the power and volume up keys until it vibrates 3 times in a row.
-Starting with pressing volume down key repeatedly will not bring up CWM (also gets stuck on the same screen).
-Will also not fastboot anymore properly. (waiting for device for "fastboot.exe -i 0x0fce getvar version"; LED on device will not even light up as blue, goes to green instantly)
-In Device Manager I can see it as "Android" with a yellow exclamation mark.
-Sony PC Companion gives me the "My Sony Xperia P LT22 is connected" popup every 15 seconds but will actually not show the device as connected
I'm wondering if I can flash a stock rom on it to recover it or if there is anything else that can be done.
Thanks in advance
huvikman said:
Hi,
Hope someone can help. I've tried to install a custom ROM today and I'm afraid I managed to brick my phone (Xperia P). Here is what i did:
I started out according to the Starters guide:
-Rooted phone
-Installed CWM
-Made a backup
-Unlocked Bootloader
-Installed JB Moonbreaker 3.5: at this point I was actually still following the starters guide, as in: wiping cache, wiping data,wiping dalvik cache and then installing from zip.
-The phone is currently stuck on the loading screen that comes after "Sony" and "Xperia" (the colorful swirling thingie)
-I can only shut it down by pressing and holding the power and volume up keys until it vibrates 3 times in a row.
-Starting with pressing volume down key repeatedly will not bring up CWM (also gets stuck on the same screen).
-Will also not fastboot anymore properly. (waiting for device for "fastboot.exe -i 0x0fce getvar version"; LED on device will not even light up as blue, goes to green instantly)
-In Device Manager I can see it as "Android" with a yellow exclamation mark.
-Sony PC Companion gives me the "My Sony Xperia P LT22 is connected" popup every 15 seconds but will actually not show the device as connected
I'm wondering if I can flash a stock rom on it to recover it or if there is anything else that can be done.
Thanks in advance
Click to expand...
Click to collapse
Keep the stock fw ready to be flashed using flashtool, enter into flashmode and flash it !
Sent from my Xperia U using xda app-developers app
Can't seem to get it flashed from flashtool. I'm pressing the back button and connecting the USB and I'M just getting the same stuff on the phone, while flashtool is waiting for the phone.
I did manage to enter fastboot again though. Should I be flashing CWM from here (since I can't enter it). Or kernel then rom? I'm a bit lost.
huvikman said:
Can't seem to get it flashed from flashtool. I'm pressing the back button and connecting the USB and I'M just getting the same stuff on the phone, while flashtool is waiting for the phone.
I did manage to enter fastboot again though. Should I be flashing CWM from here (since I can't enter it). Or kernel then rom? I'm a bit lost.
Click to expand...
Click to collapse
Its volume down key and Plug in USB, to enter flashmode
Not back button.
Or flash a kernel by fastboot mode, enter CWM and install the ROM (assuming you have the zip file in the SD card )
Sent from my Xperia U using xda app-developers app
No luck. I get a green LED and nothing happens. If I hold down volume down for really-really long then I'm back to the same boot animation.
huvikman said:
No luck. I get a green LED and nothing happens. If I hold down volume down for really-really long then I'm back to the same boot animation.
Click to expand...
Click to collapse
yes green LED it is,
i hope you had the flashing process ready at the PC right ?
First make sure your phone is shut down. long press power+vol up until you feel 3 vibrations.
From there you can try fastboot mode or flash mode.
Utensils vioment
Alright done all that, still is the same. I've started to play with other USB ports and I noticed that when I get connected it tries installing the SEMC Flash device driver. It fails with "device unplugged" message exactly at the same time when when the Sony logo appears. Then it tries installing MTU USB Device as well. Reinstalled flashtool drivers and tried in different ports. It seems as if the phone is not staying in flashmode?
huvikman said:
Alright done all that, still is the same. I've started to play with other USB ports and I noticed that when I get connected it tries installing the SEMC Flash device driver. It fails with "device unplugged" message exactly at the same time when when the Sony logo appears. Then it tries installing MTU USB Device as well. Reinstalled flashtool drivers and tried in different ports. It seems as if the phone is not staying in flashmode?
Click to expand...
Click to collapse
I recall I had that issue with wundows 7 at the beginning, what I did then was to boot my windows xp and managed to flash from there.
I have tried many things since, and if I am not mistaken it's installing flahtool drivers that fixed it finally.
I think there are 3 drivers there you need to install.
nifileb Naval
you can use emma flash tool by sony to flash your device once u get into flashboot mode(vol down den insert usb cable)
you will find it at sony developer site
did you tried to flash the rom over ICS, if yes then thats why your p got stuck at boot, coz i too got the same prob, when i tried to flash the JB moonbreaker over ICS, so what i did was pressed the power button and volume up button till 3 vibration, start flashtool and flash stock ICS firmware, but don't uncheck wipe data, otherwise you will get bootloop, after flashing is complete, now download and flash stock JB firmware, root your phone using doomlord's easy root kit or any other way you know, install cwm and now reboot into cwm flash JB stock or custom kernel and then the rom, thats it, just let me know if the prob is solved, thanks
garvitdelhi said:
you can use emma flash tool by sony to flash your device once u get into flashboot mode(vol down den insert usb cable)
you will find it at sony developer site
Click to expand...
Click to collapse
Managed to get the phone back to working with this, thanks! Now just a couple of questions left . Do I have to reroot and reinstall CWM after this? I guess BL is still unlocked right?
maknom66 said:
did you tried to flash the rom over ICS, if yes then thats why your p got stuck at boot, coz i too got the same prob, when i tried to flash the JB moonbreaker over ICS, so what i did was pressed the power button and volume up button till 3 vibration, start flashtool and flash stock ICS firmware, but don't uncheck wipe data, otherwise you will get bootloop, after flashing is complete, now download and flash stock JB firmware, root your phone using doomlord's easy root kit or any other way you know, install cwm and now reboot into cwm flash JB stock or custom kernel and then the rom, thats it, just let me know if the prob is solved, thanks
Click to expand...
Click to collapse
It was on JB stock. I'll check if I cano boot to CWM now or have to redo all that stuff and then try flashing Phantom Kernel and then Moonbreak. Will let you know
xperia p
huvikman said:
Managed to get the phone back to working with this, thanks! Now just a couple of questions left . Do I have to reroot and reinstall CWM after this? I guess BL is still unlocked right?
Click to expand...
Click to collapse
yup bl will always be unlocked regfardless of what rom you flash unless you relock it
yup if you have to install cwm again then if you want it and you have to first root it again as well
------------------------------------------------------------
Xperia P PAC rom jb 4.2.2 user
hit thanks if i helped
Thanks everyone for the input, issue resolved, kernel and rom flash was successful.
Stuck on boot
Guys I have the same problem.
I wasn't satisfied with the rom I put on my phone so I went on to put another one on it.
Flashed the kernel with fastboot, went into cwm, deleted system, cache etc. and went on to flash the rom, but there was no rom zip there, and I was sure I had put it. It was probably an error during the copy procces and it just stopped, I assumed it copied.
Well, now it is just stuck on the boot screen. I can get into fastboot and cwm, but I have nothing to flash.
I tried using the Sony recovery "Emma" but it just stays blank when I connect the phone..
Is there something else I can do?
rocker55555 said:
Guys I have the same problem.
I wasn't satisfied with the rom I put on my phone so I went on to put another one on it.
Flashed the kernel with fastboot, went into cwm, deleted system, cache etc. and went on to flash the rom, but there was no rom zip there, and I was sure I had put it. It was probably an error during the copy procces and it just stopped, I assumed it copied.
Well, now it is just stuck on the boot screen. I can get into fastboot and cwm, but I have nothing to flash.
I tried using the Sony recovery "Emma" but it just stays blank when I connect the phone..
Is there something else I can do?
Click to expand...
Click to collapse
The rom probably won't work if you delete /system so reflash stock JB first maybe this will help: http://forum.xda-developers.com/showthread.php?t=1849170
Facing exact same issue i think
garvitdelhi said:
you can use emma flash tool by sony to flash your device once u get into flashboot mode(vol down den insert usb cable)
you will find it at sony developer site
Click to expand...
Click to collapse
Hi
I think im facing a very similar issue, i m very new to this and therefore didnt understand the solution. I did visit the developer site for emma, but can you tell me the exact thing to do after starting Emma. I mean, when do i connect the phone and how, what commands to give. Below is explanation of how i got into this and what all ive tried.
OK i ve been trying to flash a new custom rom on my Xperia P, i looked at a number of guidelines and doing things step by step.
Since im very new to this i downloaded a few Roms. I was following the guide "http://droidors.com/2014/07/08/update-xperia-p-lt22i-to-android-4-4-4-kitkat-with-slimkat-custom-rom/2/" and everything was going fine. I reached the step to "fastboot flash boot boot.img", i did that and then went on the next step to boot in CWM Recovery and install the zip rom and the Gapps. During the Zip Rom install i got status 7 error.
Now, i noticed that i might have flashed the wrong Rom so rechecked the guide and installed the correct Rom which is mentioned in "http://forum.xda-developers.com/xperia-u/p-development/rom-slimkat-4-4-2-release-candidate-t2657795" . But now THE PROBLEM IS, AFTER I FLASHED THE INCORRECT IMG, MY PC IS NOT RECOGNISING THE XPERIA P SAYING IT DOESNOT RECOGNISE THE DRIVERS, therefore im not able to copy the ROM Zip on the SDcard, to then run it from CWM.
After sometime i tried the below
Ok, now i tried to flash the stock Rom through this link "http://forum.xda-developers.com/xperia-u/p-development/ftf-firmware-xperia-p-generic-world-t2322163", through flashtool to bring my phone back to life. I installed the drivers as per instructions from drivers folder, but for some reason the pc is just not accepting. I did install through this exact method yesterday night and it worked perfectly.
Please suggest. I hope im asking at the right place.
Urgent help please
I forgot to mention, after I flashed the SlimKat Rom, and things went out of hand ( till this point i could see Slimkat logo at boot and could also go in CWM Recovery ), I tried to restore through Nandroid Backup i had done. As soon i selected the restore option and then the backup file, within 2-3 seconds the phone went off, and then on boot all i can do is see "SONY" on screen. Nothing else happens.
I ve tried all this on a different machine, with different wires and different USB port, no luck
Kindly advise, im stuck with no spare phone.
Solved i guess
OK Brother,
I downloaded EMMA and am currently downloading the service. It is very self explanatory. What was amazing is when i recognised my phone "What a sight "
Flashtools wasnt able to do that, so i guess the manufacture tools are damn important ( i wasnt exactly of the opinion before )
Also it is downloading Android 4.0.4 Build 6.1.1.b.1.54, which first came on the device, which also makes me think may be i should have tried that rather than trying to flash with the JB Rom all this while.
Man, i was scared. Thanks for this thread Bro.
God Bless
Will inform once the phone is booted up to confirm it worked.
Emma Worked
OK guys, I can confirm its EMMA "Flash tool for Xperia" fixed the problem for me. It installed 4.0.4 on it.
Also there is a pdf in the Download which guides about the usage.
Sigh
Correction- it installed the latest stock ROM jb
Hi
I recently tried to flash packman rom onto my Sony Xperia Z I went through the steps of rooting and installing CWM that all went well until i noticed that I could not access recovery mode so I decided to download an app to do it for me and it worked fine so when I got round to installing the rom it came up with an error message (I forgot what it said sorry) so i thought o well it must have not flashed it so i decided to restart my phone but now it wont get past the sony logo and i cant access recovery or flashmode and i have no idea what to do please help me. Thanks!
(sorry for the lack of commas)
Aidenjl193 said:
Hi
I recently tried to flash packman rom onto my Sony Xperia Z I went through the steps of rooting and installing CWM that all went well until i noticed that I could not access recovery mode so I decided to download an app to do it for me and it worked fine so when I got round to installing the rom it came up with an error message (I forgot what it said sorry) so i thought o well it must have not flashed it so i decided to restart my phone but now it wont get past the sony logo and i cant access recovery or flashmode and i have no idea what to do please help me. Thanks!
(sorry for the lack of commas)
Click to expand...
Click to collapse
You have an obvious bootloop. Any sign of screen on is an indicator that it may still have some life in it. Can you boot into any type of mode at all? Download, Recovery, ect..
Flash the stock rom
ScatteredHell said:
Flash the stock rom
Click to expand...
Click to collapse
Is there any way to flash the stock rom without being able to access any mode?
Droid Premium said:
You have an obvious bootloop. Any sign of screen on is an indicator that it may still have some life in it. Can you boot into any type of mode at all? Download, Recovery, ect..
Click to expand...
Click to collapse
No I haven't been able to access any mode.
I am facing a similar issue. Though I am able to get into fastbood mode but I can't get into recovery mode. Whenever I run reboot it gets stucked at the sony logo and with no led light, neither red nor purple. Please help
I tried to root my moto x style, installed corectly and everything was good untill I tried to boot it up. I saw the boot logo stuck so I tried to restart my phone several times and it kept repeating so I opened up recovery and tried to do a factory reset but accidentally deleted system files. After that I tried to fix it with installing new firmware but it didn't let me, I tried to search the problem online but couldn't find any solution, then tried moto tool kit and now I can't even access bootloader. And it's a new phone... NEED HELP!!! :crying: (Sorry for bad English)
Tell me the status for now, phone is booting up or not???
Salman Al-Badgail said:
Tell me the status for now, phone is booting up or not???
Click to expand...
Click to collapse
When I turn on the phone it shows Bootloader unlocked warning and then the screen goes black and there is the android figure. Below that there's a writing saying "Erasing..."(Phone keeps restarting).
Elvinas said:
When I turn on the phone it shows Bootloader unlocked warning and then the screen goes black and there is the android figure. Below that there's a writing saying "Erasing..."(Phone keeps restarting).
Click to expand...
Click to collapse
Go for a service repair,