Hello,
My phone is Star N800 MTK6575.
I have installed MTK65XX MediaTek Preloader Driver.
When I plug in my phone in the USB, when it's turn off and without the battery, I see it in the Device Manager appearing and then disconnecting.
I tried to change the Power Settings but it didn't help. Anyone faced this problem in the past and knows how to fix it?
Hello,
My phone is Star N800 MTK6575.
I have installed MTK65XX MediaTek Preloader Driver.
When I plug in my phone in the USB, when it's turn off and without the battery, I see it in the Device Manager appearing and then disconnecting.
I tried to change the Power Settings but it didn't help. Anyone faced this problem in the past ?
Hello,
During the past days I've been trying to flash my C7 with no success. When pressing power button, it turns on and displays the Alcatel logo but stays there, it does not load the OS.
I have tried to use SPtools to flash it, I have the mtk drivers installed in my PC. When I plug the switched-off phone to the computer it turns on and couple seconds after my PC detects it (I can see the preloader mtk loaded on the device manager); however, one second right after it is detected, it is disconnected as it keeps booting to show the logo and stay there. Obviously, if the phone is not detected I cannot use SPtools to flash it.
Any suggestion will be highly appreciated.
PS: I have also tried to connect to it with adb, and dump a ROM using sideload with no sucess, the PC recognizes it from the recovery but after copying the image nothing new happens on reboot.
Hey, I got wiko ridge 4g that was bricked, it won't turn on but the light is blinking when battery is not full when i connect him on charger. I have connected the phone with PC via USB and he recognized him as 'qhsusb_bulk', i tried to unbricked it with SRK Tool 2.0, but i can't turn on usb debbuging and i don't know if the phone is rooted or not, but i did it anyway. So i managed to delete partitions with that program, but later the phone was recognized as Unknown USB Device. So my question is : is there any other way to brick the phone back, without phone being turned on, via PC ?
Thank you very much.
muki22 said:
Hey, I got wiko ridge 4g that was bricked, it won't turn on but the light is blinking when battery is not full when i connect him on charger. I have connected the phone with PC via USB and he recognized him as 'qhsusb_bulk', i tried to unbricked it with SRK Tool 2.0, but i can't turn on usb debbuging and i don't know if the phone is rooted or not, but i did it anyway. So i managed to delete partitions with that program, but later the phone was recognized as Unknown USB Device. So my question is : is there any other way to brick the phone back, without phone being turned on, via PC ?
Thank you very much.
Click to expand...
Click to collapse
Hm, nobody answered to this ,so i keep digging out on internet,and after some searching i use the qfil app, also i downloaded original stock rom for my wiko ridge 4g, through qfil i installed that rom , the pc in one point recognized my device as 4g ridge, but then just started to showing quallcomm hs-usb diagnostic mode 9092 when it connected to PC via USB. My phone show some signs ,screen was black but it vibrating, and a assume it's turned on when i press touch screen or volume changer button he reproducing sound, but on pc he is readed like quallcomm hs-usb diagnostic mode 9092! If somebody know how to fix that problem, please answer me!
Hello friends, I'm new here and i have troubles with the lenovo 6000h tablet. Its loading the lenovo screen and after that it shows the dead android with the red triangle. I got everything i need to flash it i load the scatter press download and when i connect the usb nothing happens. I have installed the drivers needed so i think the problem is that the micro usb dock is a bit loose, when charging it needed to be in specific position to get charged. What do you think is it possible this to be the problem? What are my options can i flash from sd card ? The mediatek driver also gives me the code 10 error but i have read that some people flash their devices despite that error. Any help would be appreciated!