Firmware is made based on Android 4.4.3, which gives it even more performance and smooth compared to most of our firmware. Through the introduction of scripts to optimize the firmware is very nimble and Energy-saving when used in the "Dialer" that one battery charge lasts for 3 days, and if used in this mode - 1.5 hours of games, music 1:00, 3:00 internet, sms, calls that I have enough for 2-2.5 days. As for performance I would say that the firmware also to the occasion. Niodnogo hard toy type Asphalt 8, Dead Trigger II, NFS MW not lag nigrama and pulled at the highest requirements.
The interface is designed in the style of the new Android L adds even more beauty and effectiveness. Quality camera will not miss out on the greatest moments of your life and make great pictures or video.
WARRNING THIS IS CHINA BASED FIRMWARE ! DO NOT BY ANY CHANCE FLASH OVER ROW! FLASHING IS DONE OVER KK VERSION OF FIRMWARE!
Alice Project Android 4.4.3 CN. Rom with material disign and OTA updates
Fast, beautiful, functional , multilanguage
All information, see the http://ali-pro.ru/
Update. I have uploaded for base firmware VIBEUI_V2.0_1437_7.14.1_ST.
First Flash with SP Flash Tool v.3 NOT OPTIONAL this firmware: VIBEUI_V2.0_1437_7.14.1_ST.zip.
After flash install via TWRP Alice Project.
1. wipe data/factory reset
2. wipe cache partition, mounts and storage except SD Card
3. format/cache
4. format/data
5. format/system, go back, advanced
6. wipe dalvik cache, go back
7. install zip
8. reboot system
9. after reboot you will get some error " error com.android.provision" do not pay attention and immediately reboot to recovery
10. install the patch(that file called Rev_Patch.zip)
11. reboot
12. good luck
Alice Project 9.0 Revolution
Original site link: http://ali-pro.ru/
http://alicerom.ru/
Visit and support them ! Use Google Chrome, the site is in Russian Language.
Mirror: https://drive.google.com/folderview?id=0B_B98oK4DpK1cVFLYzQ2dGd3RFk&usp=sharing
Post some screenshots !
New Uploaded Versions:
Alice Project Reborn 8.4
The list of changes is not big, but impressive.
Most importantly - completely redesigned last manager running applications. Now it will be a copy of Android 5.0 percent of 80-85, if not more. I want to see that implemented without third-party programs.
Removed custom dialer (dialer) and will be used native, only with our changes.
Removed custom contacts, and relatives will be used only with our changes.
Resolved bug with displaying the player buttons in the curtain
Should disappear bug with icons in the curtain with the inclusion of Bluetooth and an alarm clock. I have it as there was no and no.
In the Ukrainian language firmware added, now it is available for selection in the settings.
Alice Project Reborn 8.2
This update does not should be, but due to certain circumstances, decided to give all of the same update.
What's new:
Powered Gmail and other e-mail clients do not work
SIM contacts now available
In the firmware update program to display pop-up an incoming call. It just works automatically and is not available in any configuration or in the launcher. Disable this feature can only freeze the application L-Call in Titanium
Added status bar the color of the action bar in some applications. Thanks to the team for FMD useful manual.
Completely redesigned window incoming / outgoing call. Now it is 95-98% copy of Android 5.0
Added scrolling animation. Select it in the settings
Added pop-up notifications
Replace some of the graphics in the system
Well, like everything, which can and forget.
Alice Project Reborn 8.1
And so, what is new in this firmware:
There are no bugs with 8.0. Powered native lock screen keyboard without dancing with a tambourine, Brightness.
The modified shutter. Now fast settings can be edited through GravitiBox. Date placed under the clock, as in the real Android 5.0.
Returned to the standard screen running applications. Now he's not green and transparent.
Call screen is moved from the old Alice Project
Sound profiles deleted item in Settings. Now there's just sound.
Adjust the size of the font on your system.
Added Gapps. Now they do not need to put separately
Replaced launcher to Google Home
Added file manager
Added player Apollo
Alice Project Reborn 8.0
What has brought us this new firmware:
System
A new level of performance. AnTuTu indicator on Lenovo S920 = 17226 which is an absolute record among our firmware, it is even more than CyanogenMod11
Fully working ART
Additional optimization through init.d scripts and build.prop
Speed and smoothness of scrolling at the highest level
Blocking applications are already sewn into the system
Powered LED
Powered unlock screen volume keys
Interface
Completely redesigned shutter. Now it is fast and smooth
Finished interface in the missing areas
Fixed some graphics
Added our proprietary boot animation accompanied by original melody inclusion
Added pack with original wallpaper
Edited lock screen
Modified and optimized battery in the status bar
Replaced dialer (please do not confuse with the screen call on him will also work in progress)
Replace contacts
Edit view dialogs
Set custom launcher (maybe it will be replaced in the next update)
Changed window running applications
Has a function of drawing quick settings swipe down the right edge of the screen
First Flash with SP Flash Tool v.3 NOT OPTIONAL this firmware: VIBEUI_V2.0_1437_7.14.1_ST.zip.
After flash install via TWRP Alice Project.
1. wipe data/factory reset
2. wipe cache partition, mouns and storage
3. format/cache
4. format/data
5. format/system, go back, advanced
6. wipe dalvik cache, go back
7. install zip
8. reboot system
10. install update 7.1
11. reboot
12. install update 7.2
13. reboot
14. install update 7.3
15. reboot
16. install update 7.4
17. reboot
18. install update 7.5
19. reboot
Alice Project v.7.5
Changed the color of the application sms / mms
Redesigned interface incoming / outgoing call
Added branded boot animation
Alice Project v.7.4
Curtain and the status bar:
Edited icon settings
Fixed display of 2 identical inscriptions Data
Increased in the amount of the top panel
Improved swipe to show / hide quick settings
Resized status bar
New proprietary battery that does not limit climbs for other icons, ie is displayed on the same level with all
Animation charging this icon. Icon called AliceIcon
Settings:
A new hidden item Sound
New image - logo in Settings - About phone
The shadow of the Action bara.So time will in all applications
The system:
A new kind of dialog boxes
Alice Project v.7.3
- Dolby Sound Effect
- Fixed bug with viewing missed, now the error gets out
- Fixed a bug with the engineering menu, now there are all the items
- Fixed bug in Contacts, merge text with background
- Slightly increased the size of the Action Bar in applications
- Removed from the game Easter eggs
- Added standard E-mail client
- New boot animation
We welcome any donations that will go to pay for hosting for the site, HERE or HERE. Use Google Chrome for translation.
Alice Project v.7.2
- Translation dialer on Russian / Ukrainian languages
- Fixed graphics on trifles
- Corporate Image
- Settings - Remove Category Wireless Networks (points remained, removed only the inscription)
- Added advanced menu reboot
- Changing the shutter (there is a problem with turning off Wi - Fi, what would turn it off from the blinds need to push a little to the left of the switch)
- 5th PlatLogo with android (repeatedly click on the Android version
- Fixed icon SMS to Contacts
- Contacts button in the dialer now opens the contacts you, the ones that are installed
- Added Google Music Player
Alice Project v.7.1
- The most important thing is fixed ability to edit the access point APN
- adjust the schedule in the system and in the status bar
- The status bar changes the color of the action bar in some applications. As in Android 5.0
- New application for SMS that can send sms from both SIM
- New contacts who can see SIM contacts
- Fixed settings icon in the curtain when you
Alice Project v.7.0
- Substituted Service on stock, only slightly amended by Design
- Replace the calculator on a more convenient
- Returned dialer with Alice Project v.6.2 style 5th android
- Changes in the curtain (removed unnecessary switches from quick settings)
- Added a fix time zones
- Translation in some places
- The keyboard is no longer flies in landscape mode
It seems everything.
Posing with Wipe System.
To improve performance, the security patches.
Cyanogen Mode v.11 Beta 1
Works:
Wi - Fi
Bluetooth
Camera photo only
Audio in speaking and listening to music through headphones and through the speaker
RAM enough, it does not "evaporate"
Threads after installation threads wait until the eject application error "Themes", then you can safely apply the theme
ART works full
What does not work:
There are unexpected restart
The camera does not record video
Video with hardware decoding, only through the application using their codecs
USSD requests for some operators
Shows that one processor core operates at a maximum frequency, maybe it's just a mistake statistics
It seems everything.
Test this ROM.
Lenovo p780 8gb
Stympy, its work for lenovo p780 8gb version??. thanks & detail please :good:
haahaaah said:
Stympy, its work for lenovo p780 8gb version??. thanks & detail please :good:
Click to expand...
Click to collapse
Hi. Yes it works on 4 Gb and 8 Gb phones.
Can this be flashed through LiFe rom?
KylesIan said:
Can this be flashed through LiFe rom?
Click to expand...
Click to collapse
This is Chinese based ROM. Life v.1.2 is ROW. So... No it cannot be flashed over Life v.1.2.
Sent from my SMT TAB 704DC using XDA Free mobile app
From what ROM can I flash it?
KylesIan said:
From what ROM can I flash it?
Click to expand...
Click to collapse
Please go to the link. I can see that the link provided contains the Stock Chinese ROM that is to be flashed using SP Tools before flashing this Custom ROM using Recovery
Okay thanks for that. Just another question; my sim works perfectly with my ROW S227 rom, would it still work with a Chinese rom?
KylesIan said:
Okay thanks for that. Just another question; my sim works perfectly with my ROW S227 rom, would it still work with a Chinese rom?
Click to expand...
Click to collapse
Hi. Do a backup to your modem software and restore after flash.
Sent from my SMT TAB 704DC using XDA Free mobile app
stympy said:
Hi. Do a backup to your modem software and restore after flash.
Sent from my SMT TAB 704DC using XDA Free mobile app
Click to expand...
Click to collapse
How do I do that? Sorry for all the questions.
KylesIan said:
How do I do that? Sorry for all the questions.
Click to expand...
Click to collapse
Go to magazine play look for ZipME app. Install that app and with it do a backup to folders /system/etc/mddb and
/system/etc/firmware.
The file creeated is your modem software backup.
Flash your custom ROM and then reflash your modem.
Good luck.
Sent from my SMT TAB 704DC using XDA Free mobile app
Can some one help me with these ?
I really look forward to install this ROM on my P780 which is currently running on ROW_S227 Firmware. Before attempting to install this ROM Here is some information i seek. I hope some one here is resourceful enough to help me out.
1. Is it safe to flash P780_S308_130814 STOCK FIRMWARE over my existing ROM which is a rooted S227_ROW ?
2. My phone was manufactured in March 2014, i tried to flash some Chinese firmware in the past but some how the phone simply wont boot after that. Any issues whats wrong here ?
3. After installing this ROM does it use internal memory as default or the external SD card as default. If its external then is there a way we can swap them. I have a 8GB version so really don't want to waste the internal memory.
anilyarki said:
I really look forward to install this ROM on my P780 which is currently running on ROW_S227 Firmware. Before attempting to install this ROM Here is some information i seek. I hope some one here is resourceful enough to help me out.
1. Is it safe to flash P780_S308_130814 STOCK FIRMWARE over my existing ROM which is a rooted S227_ROW ?
2. My phone was manufactured in March 2014, i tried to flash some Chinese firmware in the past but some how the phone simply wont boot after that. Any issues whats wrong here ?
3. After installing this ROM does it use internal memory as default or the external SD card as default. If its external then is there a way we can swap them. I have a 8GB version so really don't want to waste the internal memory.
Click to expand...
Click to collapse
Hi. Answer:
1. it is safe to flash because this chinese ROM i uploaded is flashing with Flash Tool and flash tool will erase your existing ROM. Now because you say that your phone is 8Gb you must find a KK or JB stock ROM for your phone and update till KK last version. What i uploaded is for 4Gb phones.
2. because your phone is made in 03.2014 you must use the new preloader. You will find here. Replace the original preloader with this one and will work.
3. internal memory will be default.
This rom dont have toggle notification shortcut??
Or i miss something on setting??
Hi...
Does 3g switch work on this rom... If yes, I would like to try... TQ
Hi guys
Just installed Alice Project Reborn 8.1.
Works very well...........
Installed S308 with Carlive Recovery and then installed Alice Project 8.1 reborn ...
ROm can be downloaded from alice project website which is in Russian
Got decent Antutu Score of 16400 or so
---------- Post added at 05:20 PM ---------- Previous post was at 04:51 PM ----------
cupliz said:
This rom dont have toggle notification shortcut??
Or i miss something on setting??
Click to expand...
Click to collapse
slide down and click on human figure
some screenshots
HI stympy.. tested alice projects from V7 to 8.1
antutubenchmark not more than 16500 in any case... row s228 also gives more or less same
see the screenshots...
tried to install CM11 cant install
any comments ? suggestions ?
Salve
hy sympy, can you upload Alice project v 7.5, and Alice Reborn v8.1.
I can't acces the official links, from alicerom.ru (https://yadi.sk/d/kHwnhjBlevpU7). Am incercat cu toate browserele din dotare....... Nu merge din updateul OTA la niciuna dintre verisuni. Multumesc anticipat si ii cer scuze penru deranj.
I send a message on alice forum and now is working. At least Alice Reborn v8.1.
Related
Samsung 4.2.2 rom ported for Lenovo P780
credits to all developers.
*Only for Lenovo P780 8GB devices - Don't use in 4Gb as it may not work
Android 4.3 Custom Rom for Lenovo P780 (Stable ROM)
Features:-
--> Samsung S4 Music
--> Samsung S4 Widgets
--> S4 AccuWeather
--> Samsung S4 Sounds
--> S4 UI Sounds
--> S4 Notifications
--> S4 Alarms
--> Samsung Bootanimation
--> Samsung Boot Logo
--> Samsung Fonts
--> Samsung S4 Dailer
--> Samsung Framework
--> Samsung Tabbed Settings
--> New Sound Recorder
--> Ext4 Tweaks
--> Maxed out speed & Performance
--> Disabled most logging activities
--> VM heap tweaks
--> Removed Micromax Registration
--> Full CPU & GPU Utilization
--> Build.prop Tweaks
--> Faster and Smoother
--> Faster Streaming
--> Internet Tweaks
--> Network Tweaks
--> Proximity Tweaks
--> Battery Tweaks
And my ROM does not have a boot.img and it is a flashable zip.
How To Flash :
You Can Take CMW Backup/TWRP Backup to Revert back to your old system (Just in case)
Please Note that the first boot may take upto 10 minutes.
1) Download Canvas P780 HD.zip File
2) Put into External/Internal SD Card
3) Go to CMW Recovery/TWRP Recovery
4) Wipe Data
5) Wipe Cache
6) Wipe System
7) Wipe Dalvik Cache
8) Select Install From SD (Internal or External)
9) Select Canvas P780 HD.zip and Select YES
10) If in CWM select OK / TWRP swipe to flash
NOTE:- This ROM is Rooted if still u have issue with rooting then Download and Flash Attachment below after installing My Rom
11) Reboot Your System
12) Enjoy
Known bugs: Light Sensor not working - use fix provided after flashing (LET ME KNOW IF ANY)
DOWNLOAD HERE.
http://www.mediafire.com/download/14cjoc4c6vef7vu/P780 Canvas HD.zip
Note: I Will Not Be Responsible For Any Brick or Any Problem.....So Flash At Your Own Risk.
Hello,
i m keen to install the rom in P780 8 GB, but totally new and much afraid of bricking........
I want you to have some things in if time permits:-
1) Boot Logo of Lenovo (ie, the name of lenovo should come during on and off of the mobile....... )
2) i love the features of Character Settings of Lenovo p780... ie, smart answer, flip silent, pocket mode & decrease tone,
3) Lenovo's Calculator looks very ugly
4) Options to see Battery meter in Figures or in default icon
5) if possible, Instructions more elaboratly... step by step
6) also i have ordered a Window case cover for the phone from Shopclues, will it work on P780 as window works on S4......
7)why u wrote "Removed micromax registration" - 'cos UI is of samsung and phone is lenovo....
sorry to bother you
Regards subhi.
sub2501 said:
Hello,
i m keen to install the rom in P780 8 GB, but totally new and much afraid of bricking........
I want you to have some things in if time permits:-
1) Boot Logo of Lenovo (ie, the name of lenovo should come during on and off of the mobile....... )
2) i love the features of Character Settings of Lenovo p780... ie, smart answer, flip silent, pocket mode & decrease tone,
3) Lenovo's Calculator looks very ugly
4) Options to see Battery meter in Figures or in default icon
5) if possible, Instructions more elaboratly... step by step
6) also i have ordered a Window case cover for the phone from Shopclues, will it work on P780 as window works on S4......
7)why u wrote "Removed micromax registration" - 'cos UI is of samsung and phone is lenovo....
sorry to bother you
Regards subhi.
Click to expand...
Click to collapse
steps updated check OP - happy flashing - no issue of bricking as it is easy to unbrick and I am using this for the past 1 weak I dint find any issue I this rom
Anyone tried this rom? I am interested but I have 4Gb version...
Sent from my Lenovo P780 using Tapatalk
If u r using 4gb multi language then go a head elsr please try at your risk cross check weather your system patrician is block 6 and data is block 8
Cau you post screenshot?
Check Facebook link its there
Sent from my Lenovo P780 HD using xda app-developers app
Place check my FSP page
Sent from my Lenovo P780 HD using xda app-developers app
I don t see Facebook link...
Sent from my Lenovo P780 using Tapatalk
Can u add multitasking window like it's in note 3.
Questions
After applying this Rom, what does the partition look like?
All 8GB in one like Samsung and 4.2.2 + Lenovos or does it stay in 2 parts like Stock?
It stays in 2 part. Roms don't partition memory. Partition has to be done wid flash tool.
---------- Post added at 02:55 AM ---------- Previous post was at 02:54 AM ----------
Gallery and super gallery app not showing any pic. Same wid d music n video player. However I can see through file manager. What's the problem?
And there is no option to arrange apps. They r all auto arranged. I want alphabetical order.
Everything else seems working fine.
Ok got the media fix. It was not reading older files. So i made a new folder n copy paste all files to new folder and revert back so all files became new.
Light sensor zip not working for me I flashed and there was no sim card detected, root gone. So i am using Without that.
I think your firmware version is different kindly replace all files inside system/etc/firmware from stock and for storage issues replace fsta.* inside system etc from stock
Sent from my Lenovo P780 HD using xda app-developers app
What is fsta in system etc
Its void.fatab and void.fstab.nand
Sent from my Lenovo P780 HD using xda app-developers app
Tried both. Same problem. On media file flash, it was not showing any memory in the phone.
And one more just checked wifi also not connecting.
Or firmware is totally diferent try nee from sight for ROM and try it secondly cross verify ur portion before flashing
Sent from my Lenovo P780 HD using xda app-developers app
Works on 4gb but led not working
Thanks Mr. Raj. This ROM is perfectly working on 4gb version of P780. But the LED indicator in the front is not working. It used to flash in red or green for missed calls and messages earlier. Any solution, please?
try nee from sight for ROM
Try what?
Another.... One.
AOSP ROM for Lenovo P780
Original Link:
http://4pda.ru/forum/index.php?showtopic=475747&st=8260#entry29011125
Miror:
https://drive.google.com/folderview?id=0B2ORIgaV4iacZTdKSXVyYXBWVlU&usp=sharing
Instructions:
China ROM Vibex installed;
Copy the ARCHIVE:AOSP 4.4.2 v.1.8.zip on phone memory or SD;
Restart in Recovery(TWRP or CWM)
Install the ARCHIVE:AOSP 4.4.2 v.1.8.zip from Recovery and then Wipe Data,Cache, Dalvik Cache,etc,etc;
Restart the phone.
WARRNING: ROW AOSP DEVELOPMENT HAS STOP. THIS ARE THE LAST ARCHIVES FOR ROW ROM
ROW ROM rooted from satanduk post installed;
Copy the ARCHIVES:AOSP 4.2.2 ROW V1.3, AOSP 4.2.2 V1.4.zip on phone memory or SD;
Restart in Recovery(TWRP or CWM)
Install the ARCHIVES:AOSP 4.2.2 ROW V1.3, AOSP 4.2.2 V1.4.zip from Recovery and then Wipe Data,Cache, Dalvik Cache,etc,etc;
Restart the phone.
V1.8 ONLY FOR CHINA FIRMWARE
-new start animation
-Zoom button in the dialer
-Updated all Google's services, in particular keyboard
-ZipAlign Full
-Added standard live wallpaper
Added Mx-Pro Player
-item in the Startup settings
-install script now vaypaet not date
-Standard oboina of 4.4
V1.7 ONLY FOR CHINA FIRMWARE
-screen Edited outgoing call - thanks mixmax1982
-mode processor upgraded to Ondemand (full, not clipped ) - uniform load on all cores. Power consumption should fall
-Added support init.d
-Updated BusyBox
-Added support for RDS in FM-radio
V1.5
-Fixed crash in live wallpaper
-Camera replaced by Lenovo camera-so now the camera is fully functional and there is no any problem.
-processor operating normally while all active sensors
-Fixed Auto Brightness. Now it works correctly translated app-notes (NoteBook)
Changes in 1.4
-Item Display settings (Used Light Flow)
Pips-density screen, and change the font to Settings-Screen
-CPU management in Settings-For developers
-Fixed phone information to Settings-About phone - Device Information
Changes in 1.3
-Built-in Adobe Flash Player 11 and AdAway (ad blocker)
-Removed some unimportant Google services (You can download from the Market)
-call button on the center -Added ROW version Updated Xposed-Installer -Updated Google services and Superuser VIPER-Updated -Fixed translation errors New bot-logo
Changes in 1.2
Strip-"tails" from Acer. Now Lenovo
-Gravity Box Updated to version 3.0.2
Changes in 1.1
Ganitura-
Vibration-soft keys
, good sound library (old sound sloppy)
-Sensor Calibration
-Returned original SMS. Modified crash.
V52 Modem
Changes in 1.0
-Setting ringtones for each Sim : Blush:
-Advanced menu. For me it's more convenient than a GB -launcher now Nova. As he only has a bunch of stock options , returned to standard camera android -Built into ViperFX -Firmware altered under Chinese markup -In setting the added items Atozagruzki, ViperFX, turn mute on schedule. Added-Noise -Fixed an issue where if you disable one of the SIM icon has not changed -Removed problem where when you press the power button when the phone is locked, soft keys light up , now there is no delay release -Updated all software to the newest versions Made-view stock dialer -Engineering menu in step 180 c Russian language (For enthusiasts ) -Added engineering menu item in the setup developer
Indications:
Customizable display through LightFlow.
1. Run Light Flow, in "Settings" program:
2. "Direct method".
3. Insert "mode Root".
4. "Control LED" -> manage LightFlow
5. Include "Spec. Opportunities" (Settings-> All Settings-> Spets.vozmozhnosti-> Services-> LightFlow -> ON)
6. Set up a "notice" for themselves, not forgetting that we have only the green LED.
Custom Calls and Message Tones How To:
Create a folder on the main memory ringtones and throw back a desired tone. Then go to settings-sound-melody and choose that tune that threw into ringtones (it appears). Voila!
Gravity Box is stable. Nowhere else did not observe such stability.
For magnetic cases apply the patch from recovery without wipe.
Everything you do, you do at your own risk.
And now some screenshots!
I am currently on this rom and it is excellent.
Trimis de pe al meu P780 folosind Tapatalk
am on Vibe 1.5 kitkat, can I straight flash this rom?
btw am using a P780 china 4gb version,
thanks
Look at the Instructions on original post and make backup of your system first. Never forget to do backup.
Sent from my Lenovo P780 using xda app-developers app
stympy said:
Look at the Instructions on original post and make backup of your system first. Never forget to do backup.
Sent from my Lenovo P780 using xda app-developers app
Click to expand...
Click to collapse
thanks, but just want to confirm that its ok to flash the ASOP rom for China 'KIT" rom even is on Vibe1.5 kitkat, don't want to brick the phone,
thanks for anyone who can confirm, thanks
Only one SIM detected
After flashing the ROM, it appears to be detecting only one SIM. I have cleared the possibility defecting SIM card by trying it out in other Mobiles. Is it that I have to again rewrite the IMEI codes from the back up using Mobile uncle? Super camera and super gallery are not thare should we get the apk and install?
Hi, am on Chinese Firmware 4gb with Vibe 1.5 Kitkat, want to go bloat free, which rom would you recommend? AOSP or SLX? why?
willl I lose IMEI if switching from Chinese to ROW? thanks
DON2003 said:
Hi, am on Chinese Firmware 4gb with Vibe 1.5 Kitkat, want to go bloat free, which rom would you recommend? AOSP or SLX? why?
willl I lose IMEI if switching from Chinese to ROW? thanks
Click to expand...
Click to collapse
SLX sxeems to be better ! I use LiFe v.0.7. For me is the best.
Sorry stympy i dont read this thread, once again sorry my friend
btw, stympy how must i doing when from this rom -> http://goo.gl/oAAKPU ???
thanks before
Excellent ROM, in v1.6 is more stable and faster. I flashed after full wipes. The only problem, is some animations with some lag and Quick and extra settings with GravityBox not works fine, but this is problem cause for compatibility of MTK and kitkat.
But Lenovo released the Vibe UI from ROW versions, I will expect ROW AOSP versions and repartition tool from India forums. The best ROMs actually are, SLXROM (by Silentxxx) and AOSP versions (by power19), from Russian Lenovo forum and 4pda forum respectelly.
Flashtool version
Any one have a backup this rom with mtkdroid tool & make flashtool version??.
haahaaah said:
Any one have a backup this rom with mtkdroid tool & make flashtool version??.
Click to expand...
Click to collapse
Better you install or follow the thread at needrom discussion of p780 and follow the step by step tutorial. You don't need flashtool except for installing chinese version of p780 firmware prior to this aosp rom.
stympy said:
Look at the Instructions on original post and make backup of your system first. Never forget to do backup.
Sent from my Lenovo P780 using xda app-developers app
Click to expand...
Click to collapse
I have v1.7 , is there any way to upgrade to v1.8 without losing or restoring the entire data from scratch ?
Also, is there any way to skip the data to be installed in SD card because for the security reason I am looking for an option which could install all the apps in phone internal memory instead of SD card because SD card can be removed and data can be accessed anytime if the phone is lost.
---------- Post added at 02:22 PM ---------- Previous post was at 01:39 PM ----------
I just flashed v1.8 and then wiped dalvik cache and thats it. I am on v1.8 and I must say BOOT ANIMATION plus STARTUP ITEMS is a charm.
My tests and solutions on the AOSP 1.8:
- The magnetic cases zip patch from recovery generates a bootloop on the CHINA BASED ROM.
- StandardCamera.zip it's SnapCamera. So I intalled the Google Camera from Plays Store and tested HDR, that doesn't work. PHOTOSPHERE and LENS BLUR works. Gallery Crashes while trying to edit a picture.
- Google launcher.zip works but overwrite nova prime. Titanium backup is recomanded.
- Gravity Box is stable, but a lot of tweaks are not applied.
Here there are my steps for the INSTALLATION and to solve the ISSUE ABOUT GOOGLE ACCOUNTS :
- I installed Vibe UI with Flashtools, just booted to check it then I rebooted in recovery. I didn't put any google account on it.
- From recovery I installed the AOSP 1.8 4.4.2
- At the first boot I get this 2 messages: "Unfortunately, the process android.process.media has stopped" "Unfortunately, the process com.android.systemui has stopped" and I can't go on seting up the phone.
- Back in recovery tried a wipe to factory settings, it works, so I enter in the O.S.
Then
- Once in the O.S. I cant get to login in my Google Accounts, I get "there was a problem communicating with Google Servers"
- Back in recovery tried another wipe to factory settings, it DOES NOT works.
- From recovery I flashed again AOSP 1.8 over the AOSP 1.8, it DOES NOT works.
- Downloaded the GApps_Light_4.4.2_signed.zip, it DOES NOT works.
- So i was tired, and I installed from recovery SLX v26a CHINA.
- In SLX v26 I tried to log in with Google Play, and I logged in with success.
- Back in recovery I flashed again AOSP 1.8 over the SLX v26 china.
- Booting the AOSP 1.8, Google Play icon and files exist, but in SETTINGS->ACCOUNT there is no option to put a Google Account (only standard EMAIL ICON) and if you try adding it from Google Play, it crashes.
- Again, back in recovery, I Installed again GApps_Light_4.4.2_signed.zip
- Still in recovery, I tried a Wipe to Factory
- Back in the O.S. I tried to add an account in Settings->Accounts, and finally it works.
I found GApps_Light_4.4.2_signed.zip on XDA but i cant remember the address of the discussion. Mine was of size of 47.4 MB not the one of 50 MB, the second ones gave me an error in recovery.
Here there is the file from my GDrive: https://drive.google.com/file/d/0BwGOPBqfPRJXUzJvc0JOT2NfYlU/edit?usp=sharing
DIALER
After installation I found a DIALER with russian alphabet.
The solution is HERE:
XDA: [Port] [APK] KitKat Google Caller ID Dialer - xda-developers
More about Google caller id https://plus.google.com/photos/+andr...70061497141729
Download: http://forum.xda-developers.com/attachment.php?attachmentid=2413224&d=1385365522
At the end I have 2 dialer, one with russian alphabetand the second one by google with Caller ID funcion.
-
-
UPDATE: I just noticed that the screen remains ON while you are in a conversation with BLUETOOTH erarpiece. The proximity sensor and the SCREEN TIME OUT doen't work during the calls with bluetooth, screen remains ON
What works:
Tethering
Car Mode.
PHOTOSPHERE
LENS BLUR
Lenovo Power Manager version 1.6.7.11.01 - Installed, works, it's open the GUI, crash only by tapping on USAGE TAB and on ALARM MODE. - USABLE (thanks to @stympy for the upload)
What doent' works:
The magnetic cases zip patch from recovery generates a bootloop on the CHINA BASED ROM.
UPDATE: I just noticed that the screen remains ON while you are in a conversation with BLUETOOTH erarpiece. The proximity sensor and the SCREEN TIME OUT doen't work during the calls with bluetooth, screen remains ON
HDR
Gallery crashes while trying to edit a picture.
A lot of Gravity box Tweaks doesn't works
Lenovo Power Centers 1.3 and 2.5
STRANGE BATTERY BEHAVIOUR
The very first day I put the phone in AIRPLANE MODE with 35% at 00.00.
At 06.00 the battery was at 32%. Usually with other roms there is no such consumption of energy, with no variation of percentage displayed.
Around 8 it starts with a drammatic dropdown of enery, quicly decreasing from 30% to 11%, as in the screen.
This behaviour never happen again.
54d7d1ef
The second day, after a full charge, I installed a System App and rebboted the phone. After reboot from 100% I get 76 % of battery indication, with a "hole" in the battery graph and stats. I rebooted again and the indicator displayed 99%.
This behaviour never happen again.
--update--
Tonight I put my phone in ariplane mode at 50% of charge. This morning I found the battery at 41%. I was quite sure that were no apps using GPS, but from the following screen it seems that GPS was turned ON all nigth long.
Does airplane mode should turn off ALL the signals? Why GPS remain ON?
-end of update--
Lenovo Power centers
All the Power Centers that I had from my backups doesn't works, they crash at boot, or doesn't install at all.
Lenovo Power version 1.3. - Installed, works in background, GUI crash opening it.
Lenovo Power Version 2.5. from ROW s116.- Installed, doesn't works in background, GUI crash opening it.
Lenovo Power Manager version 1.6.7.11.01 - Installed, works, it's open the GUI, crash only by tapping on USAGE TAB and on ALARM MODE. - USABLE (thanks to @stympy for the upload)
Dagon84 said:
My test and solution on the AOSP 1.8:
- StandardCamera.zip it's SnapCamera. HDR doesn't work. PHOTOSPHERE and LENS BLUR works. Gallery Crashes while trying to edit a picture.
- Google launcher.zip works but overwrite nova prime. Titanium backuop is recomanded.
- Gravity Box is stable, but a lot of tweaks ar not applied.
- The magnetic cases zip patch from recovery generates a bootloop on the CHINA BASED ROM.
DIALER
After installation I found a DIALER with russian characters.
The solution is HERE:
XDA: [Port] [APK] KitKat Google Caller ID Dialer - xda-developers
More about Google caller id https://plus.google.com/photos/+andr...70061497141729
Download: http://forum.xda-developers.com/attachment.php?attachmentid=2413224&d=1385365522
At the end i have 2 dialer, one with russian character and the second one by google with Caller ID funcion.
-
-
What works:
Tethering
Car Mode.
PHOTOSPHERE
LENS BLUR
Lenovo Power Manager version 1.6.7.11.01 - Installed, works, it's open the GUI, crash only by tapping on USAGE TAB and on ALARM MODE. - USABLE (thanks to @stympy for the upload)
What doent' works:
The magnetic cases zip patch from recovery generates a bootloop on the CHINA BASED ROM.
HDR
Gallery crashes while trying to edit a picture.
A lot of Gravity box Tweaks doesn't works
Lenovo Power Centers 1.3 and 2.5
STRANGE BATTERY BEHAVIOUR
The very first day I put the phone in AEROPLANE MODE with 35% at 00.00.
At 06.00 the battery was at 32%. Usually with other roms there is no such consumption of energy, with no variation of percentage displayed.
Around 8 it starts with a drammatic dropdown of enery, quicly decreasing from 30% to 11%, as in the screen.
This behaviour never happen again.
54d7d1ef
The second day, after a full charge, I installed a System App and rebboted the phone. After reboot from 100% I get 76 % of battery indication, with a "hole" in the battery graph and stats. I rebooted again and the indicator displayed 99%.
This behaviour never happen again.
Lenovo Power centers
All the Power Centers that I had from my backups doesn't works, they crash at boot, or doesn't install at all.
Lenovo Power version 1.3. - Installed, works in background, GUI crash opening it.
Lenovo Power Version 2.5. from ROW s116.- Installed, doesn't works in background, GUI crash opening it.
Lenovo Power Manager version 1.6.7.11.01 - Installed, works, it's open the GUI, crash only by tapping on USAGE TAB and on ALARM MODE. - USABLE (thanks to @stympy for the upload)
Click to expand...
Click to collapse
Thanks for this best review.
Sent from my Lenovo P780 using LiFe v.07 and TWRP 2.6.3.0.
Q: How to Change Modem?
How to change modem version in this ROM?
with default modem from v1.8, one of my SIM not have signal. I tried to install different modem from another post from recovery but still no signal. I did the same method for another ROM (SLX 26 CN/KIT) and it worked.
Tried to installed another Android 4.4.2 (vibe), have the same problem, and still can not change the modem
Any one can help?
momothecat said:
How to change modem version in this ROM?
Click to expand...
Click to collapse
the modem-file in this Rom is:
modem_1_3g_n.img
that file must be replaced with root explorer par example, but don't forget to set the same permissions than before.
For me the baseband v101 works fine.
EDIT:
Maybe you need to replace both modem files. I did it first with modem.img, but there was no effect und then I replaced modem_1_3g_n.img.
naish8.5 said:
the modem-file in this Rom is:
modem_1_3g_n.img
that file must be replaced with root explorer par example, but don't forget to set the same permissions than before.
For me the baseband v101 works fine.
EDIT:
Maybe you need to replace both modem files. I did it first with modem.img, but there was no effect und then I replaced modem_1_3g_n.img.
Click to expand...
Click to collapse
Yes you are right. The files must be replaced together.
stympy said:
Yes you are right. The files must be replaced together.
Click to expand...
Click to collapse
Hi, what do you mean that BOTH FILES MUST BE REPLEACED?
In etc/firmware I have only one file called modem_1_3g_n.img, there is nothing more.
It's another modem in another folder?
Dagon84 said:
Hi, what do you mean that BOTH FILES MUST BE REPLEACED?
In etc/firmware I have only one file called modem_1_3g_n.img, there is nothing more.
It's another modem in another folder?
Click to expand...
Click to collapse
Hi. You must look in /system/etc/firmware and /system/etc/mddb. This are the 2 directories or folders you must use.
Example:
In:/system/etc/firmware you will find the file called: modem.img
In:/system/etc/mddb you will find the file called: BPLGUInfoCustomAppSrcP_MT6589_S00_P780_V23
Do you understand now?
Look in my post:
http://forum.xda-developers.com/lenovo-p780/development/how-modems-t2757923
There you will find a bunch of modems to patch from TWRP.
First backup your modem files then HAPPY PATCHING.
On 7th April, Chinese OnePlus 2 got Official Hydrogen OS v1.4 Marshmallow update which is better than Oxygen OS 3.0 in many expects. If you want to install Hydrogen OS in your OnePlus 2 with Google Apps, then follow this Guide. I will only provide you to download everything from Official Links except the TWRP and SuperSu (Optional, if you want to root your device). So here we go to look some of the features of H2OS v1.4 Marshmallow update:
Hydrogen OS V1.4 update log :
Android 6.0.1 Marshmallow System
Officially entered the Android 6.0 era, bringing fast, smooth and safe hydrogen OS experience.
Through improved sleep management " Doze Mode " for mobile phones saving 30%
Fingerprint recognition speed and security has been significantly improved
The App start faster 20 %
Hydrogen window
Hydrogen window there is more than a travel card, calendar, and notes the increase in card, it pretty Yehao
The card also supports custom sorting
Increased our carefully selected a wallpaper
Desktop
Icon usher batch finishing, can be a key New Folder
Multi-screen and move the cross folder icon becomes more convenient
SMS
Unread messages can be a key to clear the mark
Verification code text message in the notification, there had been a more convenient one-touch copy button
Spam messages no longer flood, will be arrested and brought into the interception record in
Of course, the list also slide more smoothly
Contacts
If you are in "Call log \ Contacts \ number \ Search results for" long press on, can be shortcuts
show more information on the Call History list
Call Detail Records have their own icon, you can click on to view
Add a contact entry also put out
Call
For Call settings had a face, a clearer classification
Shorten the time the phone is turned on
Number recognition capabilities have increased dramatically
Service providers call log details page has a new look
control center
Quick switch increases the "eye pattern" and " WiFi hotspots"
Increase the edit mode, you do not need to finally replace the switch
Set up
Made some level of adjustment settings
Optimize some do not understand copywriting
The WiFi hotspots increased device connected to the identification and management, instantly recognizable "he" who is
The WiFi hotspots will turn off automatically when no device access
File Manager
The downloaded files will converge in the download folder
Compressed files can be directly extracted view, of course, want to compress files is also possible
Weird source folder is labeled App Tags
Eye mode
Filter reading blue screen issue, alleviate eye fatigue
Notes
Redesigned share styles, make it less like red tape
Notes support the bulk delete
Upcoming formatted with some optimization
Share mode except image also adds a way to share text
The content of the telephone number, email, URL recognition, click to perform the corresponding operation
Lock screen
Locker charging dynamic efficiency optimized
Priority notification logic made slight adjustments, so that the information you need clearer
Control center
Cleaning effect better
Increase the default application settings
Calendar
The main interface has been renovated and can more easily view the date and the corresponding schedule
When you switch the calendar date will be displayed at the same time, WYSIWYG
Input
Input method some design optimization, more accurate input
The weather
Weather data is more accurate, said next on the next rain, said the government stop
Overseas also with the support of weather data
Weather animations optimized
Clock
Alarm Bell has a new interface design, to avoid the situation can not afford to turn off the phone's alarm clock fall
Multitasking
Multitasking increased protection logic, the application is no longer locked somehow slipped away
Hydrogen OS adhere to the homogenization of customization Andrews bring something different
Pros and Cons from my View :
Pros :
Great Battery Life
Fingerprint sensor is faster that OOS 3.0 (I have tested simultaneously with two OnePlus 2 device)
New File Manager with decent features
Dark Mode
Read Mode
Better OTG Management
Flip to Mute
Unintentional Touch Rejection
Cons:
Stock H2OS is filled with chinese bloatware
(Can be remove via Titanium Backup)
NOTE : Official TWRP and Official SuperSU doesn't work here. But Official GApps works
HOW TO : Install H2OS v1.4 Marshmallow on OnePlus 2 with Easy and Clean Method :
Download : Hydrogen OS v1.4 Zip from here
Download : Official GApps from here : www.opengapps.org (Select Android 6.0 + Arm 64)
Select GApps Package of your choice
Download : Modified TWRP recovery.img from here
Keep all these files anywhere in the Internal Storage.
Boot into TWRP.
Still Locked Bootloader with Stock Recovery ? Follow this : OFFICIAL OnePlus Rooting Guide : https://www.youtube.com/watch?feature=youtu.be&v=KZaajUEybNM
Wipe > Advcanced Wipe > Select Dalvik, System, Data, Cache > Swipe to wipe.
Go to TWRP Home.
Select Install.
Select Hydrogen OS v1.4 Zip.
Swipe to Install.
Again, Go to TWRP home.
Select Install.
Select Images button at bottom right.
Select recovery.img
Select Recovery.
Swipe to flash.
Again, Go to TWRP Home. Reboot > Recovery.
Wait to reboot into recovery.
Wipe > Advanced Wipe > Select Dalvik, System, Data, Cache > Swipe to wipe.
Again, Go to TWRP Home.
Install > Select Hydrogen OS Zip. Swipe to flash.
Now Go to TWRP home > Install > GApps.zip Swipe to flash
Again Wipe Cache and Dalvik Cache
NOTE : You will get a Error Message on TWRP Log during the installation of H2OS :
E: unknown command [wipe_data]
Don't Worry. It doesn't matter
Flash the Modified SuperSu to root.
Again wipe Dalvik Cache and Cache.
Reboot into System.
NOTE : For the first time, System will take very Long time to start. After that, it will be fine.
Now you are Done ! Enjoy the test of Chinese OnePlus flavor.
I really couldn't understand most of the features you wrote. And how would one revert back to their previous rom/TWRP? Is there any revert.zip or simply restoring the nandroid backup would do the job?
dipsup said:
I really couldn't understand most of the features you wrote. And how would one revert back to their previous rom/TWRP? Is there any revert.zip or simply restoring the nandroid backup would do the job?
Click to expand...
Click to collapse
simply restoring Nandroid backup may not do the job. Because this modified TWRP is only for H2OS v1.4 Marshmallow or OOS 3.0
If you created Nandroid backup of OOS 3.0, it will work. Otherwise not
And As you told most of the features you didn't understand : I want to tell you that I have only translated what ever written in Official Hydrogen OS download page. (Chinese to English via Google translator)
I have a thread already about this
Yash98 said:
I have a thread already about this
Click to expand...
Click to collapse
Can you give me the link ?
saeedashifahmed said:
Can you give me the link ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/oneplus-2/development/rom-hydrogenos-v1-2-0-sensors-t3264711
Duplicate of [RECOVERY] TWRP 3.0.0 + H2OS Marshmallow firmware + fixes | Revert2Lollipop
Closed.
ROM SIRIUZ V 2.6 - EMUI 8.0 HUAWEI HONOR 7XAROMA INSTALLERDONOT COPY MY WORK, Ask for Permissions
Code:
-
- I am not responsible for the damage of your cell phone if you do not correctly perform the steps
- loser warranty
- if you are not sure better not to touch and leave this page
COMPATIBLE WITH
with all versions, Huawei HONOR 7X lite
remember to know your original compilation if at any time you want to return to stock.
for example BND-L24C25 with this data you can return to stock.
REQUIREMENTS:
- EMUI 8.0.0
- Activate the OEM unlocking, which is in adjustment / developer options and leave it so forever to avoid conflict.
- unlock the bootloader.
- install the recovery that I will leave, automated from windows-linux
DETAILS OF THE ROM
ROM SIRIUZ 2.6
- Base Firmware Honor 7X (security patch for July).
- MorfuzKernel 2.1 selinux Permissive.
- Turbo GPU
- Added support init.d.
- Added busybox.
- Huawei ID back.
- Boot profile for the Darknnes-Blu_Active kernel within init.d improves performance.
- Change of the MTweaks auditor kernel application.
- Magisk 16.7.
- Screenshot by sliding three fingers.
- Deactivated operator name.
- Dual speaker activated.
- New Boot logo.
- camera mod Raw.
- I delete the data space.
- Deodexed (improves optimization).
- Improvements in the quality of photos, video and sound ..
- I eliminate unnecessary Google applications ..
- Added call recorder.
- Youtube modification (function in the background).
- Musica huawei Crack added.
- Multi-user X5 activated.
- Change of keyboard, google.
- Reduction of the size of the icons.
- Glove mode activated.
- Mtu 1500
- Improved scanned files.
- More dual cloning social network applications were added.
- Installation mode AROMA-INSTALLER.
- Music: stock or crack.
- Camera: stock, Mate10Pro or P20Pro.
- Root: Magisk or Supersu.
- Change some icons in the status bar.
- Navbar, uses the fingerprint sensor as a navigation bar.
- Solid Explorer, Kernel Auditor, Quick Reboot.
- MxPlayer.
- Sony Music.
ROOT MAGISK NOTICE
- If you select root magisk, the OEM will be deactivated.
- enter the developer's options and activate the OEM.
- Added more applications of social networks of Twin cloning
. * facebook, faceboot lite
. * messenger, messenger lite
. * whatsapp, whatsapp mod
. * instagram
. * snapchat
. * telegram
. * twitter
. * mega
. * creativefrends
. * microsoft officE
INSTALLATION MODE:
- guard the rom in an external memory.
- turn off the cell phone press the plus and power buttons until you have the TWRP window
- Press WIPE
- Press FORMAT DATA
- Write the word "yes" without quotes and accept, just do the work
- Press BACK to go back several times to the main window.
- Press WIPE, then ADVANCE WIPE
- verify that the partition DATA this in the f2fs extension
- mark: Dalvik, cache, data, internal storage, system
- IMPORTANT !: do not mark "micro sdcard".
- once you have marked, slide the "swipe to wipe" arrow to clear it.
- go back to the main sale, press INSTALL
- press SELECT STORAGE
- Switch to Micro SDCard to find the rom.
- Look for the SiriuZ rom and flash
- At the end of the installation press "wipe davilk-cache", wait for it to finish.
- reboot system.
- congratulations now will start the rom SiriuZ
Contributors:
CATUVA21
ROM OS Version: BND-LX
ROM Kernel: Stock
ROM Firmware Required: EMUI 8.0.0
Version Information:
Status: Stable
Created on: 2018-08-22
Last Updated on: 2018-08-12
Images
ROM SIRIUZ 2.6 EMUI 8.0
ROM SIRIUZ 2.6 EMUI 8.0
https://mega.nz/#!c241VZTa!rkwUICMcP_B4i4KVeTFqq75WJgxb1fV0FdkQ6q8rJyY
TELEGRAM GROUP -new group
https://t.me/joinchat/ERAhfQ8kyF6_iH5nMun5dg
If you appreciate my work the donations link is below.
R2
GAPPs are included I presume?
edit: of course they are, what am i asking...
First emui mod rom for honor 7x.. Time to at last start flashing..
Installing now, this looks badass.
Would not boot so went back to stock, been a few minutes and still has not booted.
Ok just took a little longer to boot, so far so good.
jmoss1972 said:
Installing now, this looks badass.
Click to expand...
Click to collapse
Upload some screen shots. I'm looking for a replacement for lineage os. Hope this is it.
Sent from my BND-L24 using Tapatalk
Mr. Xplosion Man said:
Upload some screen shots. I'm looking for a replacement for lineage os. Hope this is it.
Sent from my BND-L24 using Tapatalk
Click to expand...
Click to collapse
Click the link to blogspot. Screenshots are there.
which twrp version works with oreo? Does anyone have a link for a working version?
Sorry I found the image in your link
how do i remove the boot animation sound?
Some display problem in this rom
The camera application is not displayed properly (large black borders are displayed at the top and the image is distorted).
When you start a game in landscape mode a black strip appears on the left.
I hope a quick fix!
the rest of the rom is awesome.
NNiftyErse said:
Some display problem is this rom
The camera application is not displayed properly (large black borders are displayed at the top and the image is distorted).
When you start a game in landscape mode a black strip appears on the left.
I hope a quick fix!
the rest of the rom is awesome.
Click to expand...
Click to collapse
bruh... black bars are normal at this point, deal with it... the reason for it is because we have 18:9 aspect ratio while pretty much 99% of all apps and media are in 16:9 ratio.
crayonicle said:
bruh... black bars are normal at this point, deal with it... the reason for it is because we have 18:9 aspect ratio while pretty much 99% of all apps and media are in 16:9 ratio.
Click to expand...
Click to collapse
You don't understand isn't normal x) exemple on stock rom I don't have black bar on YouTube but on this rom I've..
When I back to my home I will give you a screenshot of the problem
Fresh install and using MorfuZ selinux kernel.. Phone is running at a crawl. Slow to respond to taps and opening apps
Damn, an actual rom!! How does it run guys?
Hello,
Screen of the problem (the blackbar appear only in landscape mod)
Rom is good and working properly... volte support was not found... Bugs in file manager(force closes when trying to copy something from sd card ) ... Heavy lag and touch issues when morfuz kernel was used..
Works perfectly with stock kernel...
volte support was obtained only after flashing version.img from emui stock oreo rom using twrp...
Nice work and thanks for the stable rom..
RKKS said:
Rom is good and working properly... volte support was not found... Bugs in file manager(force closes when trying to copy something from sd card ) ... Heavy lag and touch issues when morfuz kernel was used..
Works perfectly with stock kernel...
volte support was obtained only after flashing version.img from emui stock oreo rom using twrp...
Nice work and thanks for the stable rom..
Click to expand...
Click to collapse
I don't think anyone has mentioned how to get volte on these roms so this is big news if true.
Sent from my BND-L24 using Tapatalk
NNiftyErse said:
Hello,
Screen of the problem (the blackbar appear only in landscape mod)
Click to expand...
Click to collapse
dont use your phone in landscape mode then.
RKKS said:
Rom is good and working properly... volte support was not found... Bugs in file manager(force closes when trying to copy something from sd card ) ... Heavy lag and touch issues when morfuz kernel was used..
Works perfectly with stock kernel...
volte support was obtained only after flashing version.img from emui stock oreo rom using twrp...
Nice work and thanks for the stable rom..
Click to expand...
Click to collapse
huh, i have no issues at all with the morfuz kernel, and file manager does not force close when copying stuff to sd card.
Jetze243 said:
Damn, an actual rom!! How does it run guys?
Click to expand...
Click to collapse
it runs smoother than all the treble roms and custom roms for our device, just sayin.
tlxxxsracer said:
Fresh install and using MorfuZ selinux kernel.. Phone is running at a crawl. Slow to respond to taps and opening apps
Click to expand...
Click to collapse
reboot. on first boot it was buggy and glitched out.
Thank you very much for your rom, its actually the better way to quickly recover a fully functionnable emui, even the themes works !
Disclaimer: I am not responsible for anything bad that may occur with your device, but I will take all the credit you can give me if it works for you!
This ROM is based on Stock AOSP firmware. I'd like to make ROM similar to original PIXEL firmware, so here you can see my current development.
This version is only for flashing via TWRP! (it can be found here https://forum.xda-developers.com/android/help/twrp-root-custom-recovery-teclast-t8-t3892647)
Version Information
Status: stable (suits for everyday usage)
Created: 01.04.2019
Updated: 28.06.2021
Android version: kernel 3.18.35, android 7.0 Nougat
What's done/features
Added ROOT (Magisk)
New bootanimation
Custom navigation bar
System accent color is blue (instead of teal color)
Advanced reboot menu
Pixel launcher with a lots of settings
New default wallpaper
Arkamys Sound Enhancement
Miravision patch added
All messengers should work now! (what's app, facebook. etc).
Patch adds this things from Google Pixel device
Bootanimation
Fonts
Sounds and alarms
Bugs
No. Let me know if you find any.
Installation
Download firmware to internal storage
Reboot into TWRP
Do this wipes in Wipe section: system, cache, dalvik,data
Reboot recovery: go to reboot section -> choose Reboot recovery
Go to install section and choose .zip package
After installation completed just reboot device and enjoy
If you face error "failed to mount system" or something like this after installation completed - don't mind it and reboot
After you completed system setup reboot to recovery again and flash patch without wipes.
Flash arkamys patch without wipes. Install parts one by one! Turn it on at settings -> sounds -> arkamys.
Flash Miravision patch same way . Turn it on at settings -> screen -> Miravision
Screenshots
P.S After device is booted you can choose any language on system setup. Patch is not applied here!
Download
The download link is here - https://drive.google.com/drive/folders/1mcDIUiXlYGjvsBo47RtDbv3mLBaSSNlC?usp=sharing
If you would like to support further development - https://www.paypal.me/teclastT8development
Very good rom. Much better than official.
It installs and runs fine. How can I access or customize the nav bar? I don't see any options anywhere, or for many other customizations I would like to perform.
ForgottenSolstace said:
It installs and runs fine. How can I access or customize the nav bar? I don't see any options anywhere, or for many other customizations I would like to perform.
Click to expand...
Click to collapse
It means navbar differs from stock only. If you would like to customize it try to install Substratum theme engine and choose navbar mod for AOSP (android 7.0). It should work fine.
thank you for your job, is the patch include in the ROM ?
[email protected] said:
thank you for your job, is the patch include in the ROM ?
Click to expand...
Click to collapse
No, you should flash it manually after firmware was installed.
Clicking sound
The ROM is pretty nice so far but whenever I click a button or icon I get clicking sounds that sound like interfering noises, trough my headphones. I don't know what could cause it and with the stock ROM I didn't had that issue.
Hello!!!
Thank you Dev for your awesome work!!!
Anyone knowif this Firmware work on a Teclast Tablet M8 (M8X1)??
Thank you
Hi,
how can I change the font size?
Thanks!
chris78c said:
Hello!!!
Thank you Dev for your awesome work!!!
Anyone knowif this Firmware work on a Teclast Tablet M8 (M8X1)??
Thank you
Click to expand...
Click to collapse
Of course it won't work. These tablets have completely different Processors and architecture.