I was searching for stock 5.0.2 recovery for moto g xt1033 but couldn't found any reliable source. Don't wanna flash complete ROM as I'm already on unmodified stock 5.0.2. So, if there any flashable stock 5.0.2 recovery do inform me. Please.
Here check this link
http://forum.xda-developers.com/showthread.php?t=2700502
Maina16 said:
I was searching for stock 5.0.2 recovery for moto g xt1033 but couldn't found any reliable source. Don't wanna flash complete ROM as I'm already on unmodified stock 5.0.2. So, if there any flashable stock 5.0.2 recovery do inform me. Please.
Click to expand...
Click to collapse
Here check this link
http://forum.xda-developers.com/showthread.php?t=2700502
All stock firmware with country base like brazil, Asia, euphoria with Mfastboot files and all command,
I tested and this work
Asking for the best way rooting my L7 P715II and the best kitkat rom "Official" KitKat rom if there is one
Bhaa Mgdy said:
Asking for the best way rooting my L7 P715II and the best kitkat rom "Official" KitKat rom if there is one
Click to expand...
Click to collapse
Are you using the stock rom? What version of Android do you currently have?
Have you tried flashing first the KDZ file that maxx_hr has? It is very nice that it's the stock kdz from LG but only modified to have root access, and unlocked bootloader. The rest remains untouched so you can have a very close experience in the stock Kitkat 4.4.2 BUT... with root :good:
*P715 V20A OPEN ESA (India)*
*P715 V20A CIS by vvitaly*
Search one rooted kdz prepared for flash here: Various Rooted Kiktkat KDZ.
Then you can use the custom recovery to flash another ROM. I don't have the Dual-Sim so I can't suggest an specific one but having root and a custom recovery... just backup your files and try everything haha
Well, I first installed the Lollipop .kdz from the LG Firmware website. So, should I flash back to KitKat so then I can flash the new ROM or I can flash the ROM directly from my current version?
And another question, what is the better Lollipop ROM? By better I mean like performance, battery life, multitasking.
Btw, I'm new with this so sorry
I have a D618.
Thanks.
Edwinc26 said:
Well, I first installed the Lollipop .kdz from the LG Firmware website. So, should I flash back to KitKat so then I can flash the new ROM or I can flash the ROM directly from my current version?
And another question, what is the better Lollipop ROM? By better I mean like performance, battery life, multitasking.
Btw, I'm new with this so sorry
I have a D618.
Thanks.
Click to expand...
Click to collapse
1- to flash kitkat officiel ROM just flash kdz to flash a custom rom you have to back to stock kitkat and root unlock boot loader and flash TWRP or flash the kitkat bootstack and custom rom from stock lollipop
2- everyone have his best lollipop custom rom but for me i prefere CM12.1 with nikita's extendedKernel :good:
Hey guys, I am thinking of flashing cm 13 rom based on android 6.0.1 on my moto e (1st Generation). my question is that all you guys who have upgraded to the cm13 rom on their moto e, how is your experience now?facing any problems or is it just great from the stock rom experience. Please help and share.
AbhinavIsgrt said:
Hey guys, I am thinking of flashing cm 13 rom based on android 6.0.1 on my moto e (1st Generation). my question is that all you guys who have upgraded to the cm13 rom on their moto e, how is your experience now?facing any problems or is it just great from the stock rom experience. Please help and share.
Click to expand...
Click to collapse
You will get performance close to deodexed KitKat stock rom .. No problems so far .. surely upgrade your device to cm13 :good:
definitely no problems.. just great.
latest nightly works flawlessly..
there is plethora of feature in marshmallow and in being cyanogenmod
I am also thinking in flashing CM13 rom based on android 6.0.1 on my Moto-E (1st Generation) XT1021...
I am currently using the following 5.1 ROM:
Retail US 5.1 ROM (Optimized) v1.0a (311mb)Non-Deodexed:
http://forum.xda-developers.com/devdb/project/dl/?id=14437
That I Found in the following post:
http://forum.xda-developers.com/moto-e/development/rom-stock-motorola-lollipop-rom-t3167111
So, I would like to know if I can safely flash directly the CM13 ROM, on top of my current v5.1 ?
And if anyone here could give me the correct link to download the CM13 ROM that works best on the Moto-E XT-1021 ?
Thanks in advance for helping me !
ulises.rodriguez said:
I am also thinking in flashing CM13 rom based on android 6.0.1 on my Moto-E (1st Generation) XT1021...
I am currently using the following 5.1 ROM:
Retail US 5.1 ROM (Optimized) v1.0a (311mb)Non-Deodexed:
http://forum.xda-developers.com/devdb/project/dl/?id=14437
That I Found in the following post:
http://forum.xda-developers.com/moto-e/development/rom-stock-motorola-lollipop-rom-t3167111
So, I would like to know if I can safely flash directly the CM13 ROM, on top of my current v5.1 ?
And if anyone here could give me the correct link to download the CM13 ROM that works best on the Moto-E XT-1021 ?
Thanks in advance for helping me !
Click to expand...
Click to collapse
Yes you can directly clean flash cm13 .. make sure you use gapps 6.0 .. and flash cm13 and gapps in a single session
https://download.cyanogenmod.org/?device=condor
Here is the link to official nightlies
ABSathe said:
Yes you can directly clean flash cm13 .. make sure you use gapps 6.0 .. and flash cm13 and gapps in a single session
https://download.cyanogenmod.org/?device=condor
Here is the link to official nightlies
Click to expand...
Click to collapse
ABSathe, 1000 Thanks for the quick reply, for letting me know that I can directly clean flash cm13 over 5.1 and for the link to official nightlies !
Please confirm if this is the correct method to flash the CM13 ROM:
1) Boot into latest TWRP and Format Data: Wipe > Format DATA > Yes
2) Transfer ROM to SDCARD or Internal Storage: CM13 ROM + gapps 6.0
3) TWRP > Wipe > Factory reset and flash CM13 ROM, and then Flash gapps 6.0 (flash cm13 and gapps in a single session)
4) Reboot.
However, since I have already installed in my Moto-T, the version 2.8.7 of TWRP ( http://forum.xda-developers.com/mot...recovery-twrp-2-8-6-0-touch-recovery-t3100879 ), I would like to know if is better and also you recommended me to install first ( using fastboot flash recovery) the cm-13.0-20160810-NIGHTLY-condor-recovery.img (instead of TWRP 2.8.7) ? :
CyanogenMod Recovery:
https://download.cyanogenmod.org/get/jenkins/173585/cm-13.0-20160810-NIGHTLY-condor-recovery.img
And then the:
CyanogenMod Build
cm-13.0-20160810-NIGHTLY-condor.zip (322.76 MB)
https://download.cyanogenmod.org/get/jenkins/173585/cm-13.0-20160810-NIGHTLY-condor.zip
And Finally - Flash gapps 6.0:
http://forum.xda-developers.com/android/general/gapps-gapps-6-0-1-minimal-t3276606
https://www.androidfilehost.com/?fid=24533103863139560
One last question, since I know that the CM13 is not based in an official Motorola release, I would like to know what is working flawlessly, and what is not working with in the Moto-E if I use this CM13 ROM ?
Please excuse all the questions, but I will like to be fully sure of the method and the correct files, that I have to use to successfully flash my Moto-E to CM13, to avoid future problems.
Thanks again for all your help !!
@ulises.rodriguez
I would recommend following steps
1)Download latest twrp (3.0.2) from twrp official website
2) Reboot into recovery and choose downloaded recovery image and then select recovery partition
(Twrp updated .. u can reboot for file transfer)
3)Transfer rom and gapps6.0 to sd card
4)Reboot into twrp and wipe /system,/data,/cache,/dalvikcache partitions (internal storage is optional )
5)choose rom zip (latest from cm downloads)
6)after rom zip is flashed successfully .. choose gapps zip (use open gapps Pico)
7)After successfully flashing both files .. reboot into system and enjoy new rom on moto e
Cm13 today's nightly working flawless for me
(And regarding your first sentence of post(1000 thanks ) .. I can't see them on my profile XD (Just joking .. hit thanks only if u want ))
Ignore any English grammatical mistakes in the post
ABSathe said:
@ulises.rodriguez
I would recommend following steps
1)Download latest twrp (3.0.2) from twrp official website
2) Reboot into recovery and choose downloaded recovery image and then select recovery partition
(Twrp updated .. u can reboot for file transfer)
3)Transfer rom and gapps6.0 to sd card
4)Reboot into twrp and wipe /system,/data,/cache,/dalvikcache partitions (internal storage is optional )
5)choose rom zip (latest from cm downloads)
6)after rom zip is flashed successfully .. choose gapps zip (use open gapps Pico)
7)After successfully flashing both files .. reboot into system and enjoy new rom on moto e
Cm13 today's nightly working flawless for me
(And regarding your first sentence of post(1000 thanks ) .. I can't see them on my profile XD (Just joking .. hit thanks only if u want ))
Ignore any English grammatical mistakes in the post
Click to expand...
Click to collapse
ABSathe, thanks again for your fast response and also valuable help !
Is this the open gapps6.0 Pico that you have installed in your Moto-E ? :
open_gapps-arm-6.0-pico-20160810.zip
http://opengapps.org/?download=true&arch=arm&api=6.0&variant=pico
With regard to my question about how well it is currently working the CM13 in the Moto-E, and what is not working yet...
I was asking because I've heard that as the CM13 was not based on a official version of Motorola, some features of the Moto-E did not work very well...
So, I would like to know, if the proximity sensor, Phone Signal Bluetooth, Camera, Gyroscope and all other sensors, if all of them are working well, or if any have some limitations ?
Are there any features that you have found that work best with the CM13, than with the official ROMs from Motorola for the Moto-E ?
Thanks again for helping me and always answer all my requests !
ulises.rodriguez said:
ABSathe, thanks again for your fast response and also valuable help !
Is this the open gapps6.0 Pico that you have installed in your Moto-E ? :
open_gapps-arm-6.0-pico-20160810.zip
http://opengapps.org/?download=true&arch=arm&api=6.0&variant=pico
With regard to my question about how well it is currently working the CM13 in the Moto-E, and what is not working yet...
I was asking because I've heard that as the CM13 was not based on a official version of Motorola, some features of the Moto-E did not work very well...
So, I would like to know, if the proximity sensor, Phone Signal Bluetooth, Camera, Gyroscope and all other sensors, if all of them are working well, or if any have some limitations ?
Are there any features that you have found that work best with the CM13, than with the official ROMs from Motorola for the Moto-E ?
Thanks again for helping me and always answer all my requests !
Click to expand...
Click to collapse
All the sensors are working perfectly
And regarding gapps .. I have installed older package (which I downloaded in July) .. but the latest one will just work fine
And latest nightly of cm13 is working perfectly for me.. so go for it
Sent from my Nexus 5X using XDA Labs
Hello,
I have a LG X Power alias K220 and the Stock rom must be reinstalled.I tested the LG Flash Tool 2014 and a stock rom from a non official Side because i cant find any Forums...How i do install a rom on a lg Phone?can anybody help me?
Thanks
etf3k said:
Hello,
I have a LG X Power alias K220 and the Stock rom must be reinstalled.I tested the LG Flash Tool 2014 and a stock rom from a non official Side because i cant find any Forums...How i do install a rom on a lg Phone?can anybody help me?
Thanks
Click to expand...
Click to collapse
Why have you posted this in the themes forum?
we think here is the best and safe and He think too LOL. I juse saw I a few day Xpower stock rom KDZ file can flash back to stock everywhere in internet !!!! before none !!!!! and someone finally put for xpower stock rom . I flash stock rom for my cricket